EDC Knives

Spyderco Centofante 3 Review

The Centofante 3 is one of Spyderco’s most long-lived designs. Introduced in 2004 and unchanged to this day, it’s been around long enough to witness most of the rest of Spyderco’s lineup either evolve or go extinct. I think the reason why is simple: the Centofante still looks good.

Buy the Spyderco Centofante 3 at BladeHQ

Buy on Amazon

Even a diehard Spyderco fan will admit that the company’s design language can be… polarizing. The Centofante achieves broader appeal by standing apart from the typical Spyderco style: no bulging blade, no forward finger choil, no full-flat grind. It’s slim, simple, yet dramatic. If not for the round hole and the silver bug in the handle, it could easily pass as a knife from another brand.

I’ve long been tempted to pick one up for myself, but skepticism of its old-fashioned pinned construction always held me back. Until now. So, is the Spyderco Centofante 3 really as timeless as it looks?

General Dimensions & Blade Details

The blade on the Centofante is just shy of three and a quarter inches long. Thanks to a tiny ricasso and the absence of a finger choil, it has almost the same amount of usable edge as the significantly larger Paramilitary 2.

Despite all the edge, the blade still feels petite – no doubt due to its exceptionally thin blade stock. It’s the Centofante’s most noteworthy spec: at 1.95mm thick (according to my calipers), it’s easily the longest, thinnest folding blade in Spyderco’s entire catalog, if not the knife market at large. The only knives I own with thinner blades are either keychain-sized novelties or flexible kitchen knives. The Centofante makes the Delica’s blade stock look generous in comparison, and the Para 3’s, outrageous.

A hollow grind was definitely the right choice here. As much as I appreciate Spyderco’s full-flat grinds, they necessarily get quite thin towards the tip. The steady hollow grind on the Centofante has no such distal taper, preventing this sliver of a blade from being drawn too thin. There’s no flex, and the tip is narrow but not delicate. While I would never recommend prying with it, the blade seems better equipped for the task than, say, a full-flat ground Delica, since it’s supported by full thickness blade stock almost all the way to the tip.

My Centofante didn’t arrive as sticky sharp as I have come to expect from Seki City, Japan Spydercos. Thankfully, the neatly applied factory edge and sharpening choil made it easy enough to touch up. As you might expect with a knife this thin, it cuts quite well. It doesn’t have the shearing power of a broad, flat ground blade, but it’s much more agile – able to twist quickly mid-cut without much resistance. Whether it’s a drop point or a spearpoint, the blade shape just works: a stretch of flat edge, a gentle belly, and a focused tip.

The blade steel is VG-10, a time-tested alloy with excellent corrosion resistance and decent edge retention. While today’s best powder metallurgy concoctions outclass it in one way or another, I don’t really miss them here. The more knives I use, the more I appreciate well-balanced steels; especially ones that deliver good value like VG-10. Also, on a knife that can’t be taken apart for cleaning, VG-10’s stainlessness is a major asset.

Handle, Ergonomics, & Pocket Clip

At a glance, the handle of the Centofante looks like anodized aluminum. If it was cool to the touch, it would feel like it, too. It’s actually plastic (fiberglass reinforced nylon, to be specific) with a similarly smooth, light texture. The silver bug and “speed lines” molded into the handle seemed a bit odd at first, but they grew on me: they give an otherwise plain knife some personality without being ostentatious.

The Centofante is exceedingly comfortable in hand. The four and a half inch handle is lightweight, nimble, and well-sized for the blade. Its ergonomic features are subtle. No finger grooves or jutting guards, just gentle curves that suggest – not demand – how to hold it. I especially like how it bows down into the palm: it helps the skinny handle feel more substantial, and keeps the angle of the blade better aligned with the arm. If you’ve ever used a Spyderco Military, the Centofante will feel weirdly similar. Despite the size difference, the knives share the same sloping ergonomic geometry.

The pocket clip is highly functional, doubly so because the handles are smooth. It comes from the factory configured for tip-down carry. I’m no tip-up evangelist, but after carrying it tip-down for a few days it was obvious the factory got it wrong. The exposed tang, pointy thumb ramp, and aggressive jimping on the blade snag everything in their path. Front pocket, back pocket; didn’t matter – retrieving a tip-down Centofante from any pocket was awkward and unpleasant, as was reaching past it. Luckily, flipping the clip to tip-up instantly and entirely solved the problem.

The real snag with the Centofante – well, the one you can’t fix with a screwdriver – is the handle’s pinned construction. I understand why it’s a deal-breaker for some people, especially the tinkerers who like to modify their knives and those who need something 100% rust proof. Given the choice, I’d take threaded fasteners over pins myself.

Nevertheless, my experience with the Centofante was completely undiminished by the way it was put together. Honestly, I was fishing for a problem and still couldn’t find one. We knife nerds can get swept up in hypotheticals. What if the pivot comes loose? What happens if the knife gets filled with sand? In reality, most of the projected problems with pinned construction have simple solutions – just not the same ones as a knife held together with screws. The pivot came perfectly set from the factory, and, being incapable of twisting itself loose, it has stayed that way. When I got sharpening stone slurry all over the knife, I cleaned it with soap and hot water, followed by a squirt of penetrating oil. Basically, I used the Centofante with impunity and it’s only gotten better. So, why worry?

Deployment & Lockup

A back lock secures the Centofante open. Like many old-school back locks, there’s a touch of vertical flex in the lockup – not enough to hear or see, just enough to feel when bearing down into a cut. Spyderco’s newer back locks have stamped out this endemic blade play with tight manufacturing tolerances and refinements to lock geometry. It would be nice to see those improvements carried over to older designs like the Centofante, but since it doesn’t affect the lock’s strength or security, I didn’t let it bother me.

The blade has a springy self-close, and once broken in it was easy to thumb or spydie-flick open. There’s enough ricasso to allow for one-handed closing, so long as you’re mindful of where your fingers are on the handle.

Spyderco Centofante 3 Review – Final Thoughts

This is a chimera of a knife. It’s almost as if it was built to satisfy a bunch of contradictory design objectives all at the same time. A strong grind on a delicate blade. An upper class look for a middle class price. Traditional construction on a modern folder. Somehow, the Centofante manages to hit those opposing targets simultaneously instead of splitting the difference and missing them altogether – if the late Frank Centofante was a bowler instead of a knifemaker, the Spyderco Centofante would be a 7-10 split conversion.

Ironically, the contradictions that make the Centofante unappealing to knife enthusiasts are probably the exact reasons for the Centofante’s long-term success. It’s not a niche knife. It’s a classy, charming, low-maintenance workhorse of a blade that belies its price point. For me, that makes the Spyderco Centofante 3 the consummate gift knife: handsome enough to appeal to anyone, and uncomplicated enough to work for someone who’s never even heard of a “torx bit.” No instructions necessary, no setup required (well, maybe you should go ahead and flip the pocket clip before wrapping it up). Give one to someone who appreciates nice things but knows nothing about knives, or someone who appreciates knives but knows nothing about nice things.

Spyderco CENTOFANTE 3 Prestige Folding Utility Pocket Knife with 3.14" VG-10 Stainless Steel Hollow Ground Blade and Lightweight FRN Handle - PlainEdge - C66PBK3

One of a Kind: Designed in collaboration with Frank Centofante, longtime custom knifemaker and past President of the Knifemaker's Guild, the Centofante 3 captures the spirit of his custom designs.
Ultra-Lightweight: The Centofante 3 has a thin-profiled, lightweight FRN Handle. Two channels are furrowed out of the handle for better grip and a Palladium silver Spyderco bug is inlayed into its surface.
Easy-to-Use Lock: For added security and convenience the back-lock is positioned midway on the spine and David Boye Dent is cut from the locking lever.
Pocket-Friendly: To ensure discreet carry the Centrofante 3 has a black steel pocket clip positions for tip-up/down, right-hand carry.
Versatile: The VG-10 blade has both a hollow-grind and swedge-grind with non-sharpened spine serrations (jimping) to hold the thumb steady when cutting.

I recommend purchasing the Spyderco Centofante 3 at Amazon or BladeHQ. Thanks for checking out my review.

Bark River PSK Review

by Josh Wussow 6 Comments

In the world of fixed blades, few names carry as much clout as Bark River. They’re a mainstay in the outdoor community, with a reputation for high-quality, American-made blades. But, how far down can one distill their legacy? I aim to find out with a review of the Bark River PSK.

Buy the Bark River PSK at KnivesShipFree | BladeHQ

Short for “Personal Survival Knife,” this diminutive entry bills itself as a perfect backup to your full-sized outdoor companion. The makers have used their knowledge and top-notch materials to pack as much utility as possible into the smallest practical space. I’ve cooked, hiked, and tooled around with the PSK for a few months now, and my thoughts are, well, complicated.

General Dimensions and Blade Details

Look – I’m going to try to keep this review from being one continuous short joke. But, let’s discuss the elephant in the room – Despite owning, carrying, and using an ESEE Candiru on a regular basis, the PSK immediately struck me as undersized. This is especially true when you factor in its $150-ish price tag.

That being said, there’s still a lot to like throughout the PSK’s 5.25-inch span. Bark River has fitted this full tang blade with burgundy Micarta scales, leaving 2.25-inches of satin Elmax up front. Two of these inches are sharpened, with a drop point design sloping down from its .08-inch thickness. This results in a convex edge, a grind well known for its versatile nature and outstanding durability.

But, while convex edges may be Bark River’s stock and trade, this is my first knife with this particular grind. I found it to be eminently capable, from wood carving to food prep and everyday chores. The sharpening anxiety is real, however. Elmax is definitely a long-wearing steel, but I’m concerned about my ability to sharpen this knife with my current equipment. The blade’s converging slopes require an abrasive surface with a little give in it, allowing you to gently roll the knife while honing the edge.

I know you can use sandpaper and a mousepad to preserve the curve but… Come on. This is a $150 knife, and I feel weird about sharpening it with products from Ace Hardware and Staples. That’s my hangup, though, not the knife’s.

Handle and Ergonomics

Ergo’s can be trick when it comes to small knives. Compact frames and tight tolerances leave less room for error. Thankfully, Bark River knows their craft. While the 3-inch handle is smaller than the blade on my Kizer Begleiter, the PSK manages to fit snuggly in my medium/large hand. This is due in part to its 0.38-inch thick handle and 1.45-ounce heft, which gives it a feeling of solidity lacking in the stock Candiru.

Here’s another advantage of the PSK: Thanks to its squared-off spine, this knife can be used to strike a ferro rod. It’s a nice touch on a blade with “Survival” in its acronym. I was able to get a small fire going in just a few moments, despite some fairly damp conditions.

The lanyard hole is nicely finished, as well. I’m not a lanyard person in general, but these small knives definitely benefit from a little cordage out back. But, while basic paracord looks natural on the bare frame of the ESEE, the fine handles on the PSK would probably benefit from a strip of nice leather.

Sheath

Bark River’s material quality carries over to the sheath. This is one of the best made leather items I own, size be damned. It’s thick, solidly stitched, and well finished. There was a definite break in period at the outset, however. I had to force the knife in the first time, after which it took quite a while to work its way out. But, as with all leather sheaths, it’s loosened over time.

The bigger issue here is, “Where do you carry it?” While I was (barely) able to fit my belt through the loop, this isn’t a comfortable carry outside the pocket. Wait – That’s not entirely accurate. A better way to put it is that, given the size of the knife and the depth to which it sits in the sheath, it’s very difficult to draw and return the PSK when it’s riding on my belt. The angle of reentry can be tricky, and I was always concerned that I’d slip and stab myself in the thigh.

Honestly, I think a pocket clip stitched into the leather would have been a better call here.

Bark River PSK Review – Final Thoughts

Here’s what it boils down to: The PSK is a well-crafted, aesthetically pleasing, and surprisingly capable small fixed blade. It handled everything I threw at it without issue. The design is on-point, even down to the blade etching and colorful liners.

But, no matter how much capability you pack into these two inches of blade, it’s still a very small knife. It’s also tricky to carry, odd to sharpen, and more than twice the price of the similarly-sized Candiru.

We should also mention the warranty. Bark River offers a lifetime guarantee against manufacturer defects, which should put you at ease when it comes to actually using the PSK. But again, this isn’t as comprehensive as the “No questions asked” coverage you get from ESEE.

In the end, I’ve struggled to find the target audience for this blade. Outdoorsy folks will probably want something larger, unless they’re comfortable keeping $150-worth of backup knife in their packs. Kids and collectors, maybe?

The PSK reminds me of a small plate of food prepared by a world-class chef. No matter how finely crafted, perfectly presented, and delicious it may be, there’s just not enough there to quell the hunger. If you’re looking for an entry point into the world of Bark River, the PSK is an interesting piece. But for now, I’ll be swimming up a different stream.

Bark River PSK – From $134.95
From: BladeHQ

I recommend purchasing the Bark River PSK at BladeHQ, KnivesShipFree, or Amazon. Thank you for reading.

Benchmade Bailout Review

by Aaron Shapiro 3 Comments

There has been something interesting going on at Benchmade Knife Co. I’ve said it a few times in recent reviews, but it’s worth highlighting here. They used to be the dusty old gun-shop knife brand. That’s not to say the old mini Griptillians were terrible, but just that I don’t think many people would have called them, “exciting.” Some of their newer designs from the last 2-3 years have been on a different level, and the Bailout is no exception.

Buy the Benchmade Bailout at BladeHQ
Buy on Amazon

The Benchmade Bailout is the companion to their also newish released Bugout. Both knives share almost every trait apart from steel, blade shape, and their vaguely prepper-ish names. I like these knives, but I’ve always had an affinity for tantos, so I opted for the Bailout.

Before we get too far into the review, let’s touch on some general specs…

(All Measurements are my personal measurements and may differ from manufacturers specs)

Blade: 3”
OAL: 8”
Thickness: .402” not counting clip .614” with clip
Blade Thickness: .93”
Steel: 3V
Weight: 2.1oz
Lock: Axis Lock

Blade and Steel

Before I get into the review too much, I want to address a potential elephant in the room. At the time of this review, there has just been a little scandal on Instagram regarding the Bailout.

Apparently, an Instagram account had one of these blades Rockwell tested by a friend. The knife came back with a mid 50’s Rockwell when it is advertised at 60 HRC. I have no real perspective on this apart from saying this: A single independent source is not something to base an entire opinion on. If ten knives had been randomly and all found to be lower in HRC than advertised, when tested by a reliable source, I would take a little more heed.

/rantoff let’s get on with it.

The Benchmade Bailout is a tanto shaped blade made out of 3V steel. The blade is then finished with a slick grey Cerakote to protect from corrosion and give it that “high-speed-low-drag,” appeal.

I’ve carried this knife in a lot of scenarios since first purchasing it. It was in my pocket when I built a fence around my house. It’s been in my pocket on river raft days. It’s also been with me whenever I’m doing something that I wouldn’t want to subject a custom knife to. In these contexts, it’s done a lot. I’ve split open Quik-crete bags with it, sharpened pencils, popped ties holding lumber together etc etc… It’s done all of these very well.

I’m not one to compare how something passed through a material or how many consecutive cardboard cuts it can do before failing. I am, however, someone that grabs for their pocket knife frequently and takes notice if it preforms the “real-world task,” the way I needed it to. The Bailout did this well, then stropped back to sharp easily.

The 3V steel that Benchmade has selected is a favorite of mine. I often request it on my custom knife orders. It’s also one of the nicer steels to sharpen, in my experience. 3V will take a fine edge with minimal effort and retain it for a long, long time. That being said, it’s not stainless. 3V has 7.5% Chromium, so it’s “nearly” stainless much like D2.

From what I’ve seen if you keep your knives cleaned and maintained you’ll avoid any staining and pitting. In the specific case of the Bailout, Benchmade has coated the steel, so you’re only really going to see any stain issues on the edges.

Handle, Ergonomics, and Pocket Clip

The Bailout’s handle is made from textured Grivory, a polymer based material. The handle slabs are thin and skeletonized with a consistent matrix of pockets milled out to reduce weight but maintain strength. The slabs themselves are a svelte .12” thick. They feel good in the hand with enough grip that the knife feels secure but not so much that it begins to cause hot spots.

Benchmade has flared the handle out near the pivot to reduce the possibility that you’ll slip onto the blade if you use it for a piercing task. This flaring also acts as a bit of a thumb ramp for me.

Moving to the back, we have an aluminum pommel. I suppose the idea behind this is for some last-ditch striking application. I would love to have seen hardened steel used instead, but I imagine it came down to a weight/strength type scenario.

The clip is excellent. It’s a short (in length) deep carry clip. It tucks right into the palm of your hand when you’re holding the knife and carry nice and deep in the pocket. I would love to see more makers take up the shorter clips instead of making them half the length of the knife itself. That being said, it’s a tight clip, so if you have thicker pockets, you may run into an issue getting it clipped on.

And speaking of pockets, the Bailout carries easily. At just over 2 ounces, this is a knife you will quickly forget you are carrying until you need it. The Bailout isn’t quite as discreet as the Bugout, as it has a has that slotted protruding pommel, but everything is blacked out for a low profile. Here is a picture of it in the pocket:

No complaints in the carry department.

Deployment and Lockup

The Bailout utilizes dual thumb studs and phosphor bronze washers to get the blade open. This is standard fare for Benchmade, and much like their other knives, the blade deploys smoothly and easily.

Ahh, the axis lock. I’ve talked about it before in previous reviews, but suffice to say I’m a fan. I like it when watch companies incorporate mechanisms that are ambidextrous. It opens the doors for left-handed users as well as potentials users that want to carry weak side.

The Axis lock itself is pretty great. It operates by moving a hardened steel bar along the curved tang of the blade until it reaches the open position. Once it does two springs, snap it in place blocking the knife from closing. The bar itself extends across the length of the knife’s handle allowing you to open it from either side, thus ambidextrous. The Axis lock has been historically proven to be a reliable and robust locking method for a good portion of Benchmade’s catalog.

Competitive Offerings

For the sake of argument, let’s look at some competitive options:

We have the Spyderco Para 3 Lightweight, priced around $40 less than the Bailout. Same FRN style handles, somewhat ambidextrous compression lock, but the steel is where you’re making a compromise. The Para 3 uses CTS-BD1N, which is new to me, but it seems like it wouldn’t outperform 3V.

Or we could look at Zero Tolerance 0450. I like this knife, but it costs roughly $40 more than the Bailout, and due to the Titanium construction will weigh significantly more. That’s not necessarily a bad thing, but the Bailout is trying to fill a specific need in a folding knife. I doubt the 0450 would be a knife you’d literally throw in a Bailout (or Bugout) bag due primarily to weight and cost.

Benchmade Bailout Review – Final Thoughts

When I opened this review, I touched on the fact that Benchmade has been creating some incredibly fresh and cool designs that fit a little better into the landscape of 2019’s knife collecting. The Bailout (and it’s Bugout twin sibling) are perfect examples of this. Benchmade has taken tried and true materials and molded them into a configuration that the EDC community values greatly. It’s thin, light, and durable. Benchmade has selected top-tier steel that will take a beating and keep on cutting. On top of all of this, the knife looks cool! The Cerakoted blade with an aggressive tanto tip is primed and ready for some Instagram pocket-dump cred.

The best part, however, is the price: Currently, BladeHQ has the Bailout priced at $144.50. That’s a lot of value for your money in my opinion.

Sale

Benchmade - Bailout 537GY EDC Knife with Black Grivory Handle (537GY)

ULTRALIGHT DESIGN: A slim, sleek stealth knife that adds confidence to your kit; Lightweight design for optimal strength-to-weight ratio
AMERICAN MADE CPM-3V STEEL: A powder-metal tool steel engineered for high stress and extreme force; Exceptionally tough with good edge retention; Requires a little extra care to keep the rust off
6061-T6 ALUMINUM HANDLE: Originally developed as a premium aircraft grade aluminum it offers a solid handle and form at nominal weight.
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Mini tip-up reversible deep-carry pocket clip for ultimate accessibility

Editor: I recommend purchasing the Benchmade Bailout from Amazon or BladeHQ. Thanks for reading.

Kershaw Bareknuckle Review

by Seth Vietti 5 Comments

It’s been a long time coming. The Kershaw Bareknuckle is the latest iteration of a knife design that has been churning between sister brands (and rival companies) since Zero Tolerance unveiled the 0777 back in 2011. It’s also something of a new flagship for Kershaw, who haven’t introduced a moderately priced, USA-made, manual action folder since the Skyline hit the market more than a decade ago.

Buy the KershawBareknuckle at BladeHQ
Buy on Amazon

I was excited to get my hands on a Bareknuckle. From afar, it looked like a winner: a covetable design, made well, at a competitive price. Does it deliver? Let’s take a look.

General Dimensions & Blade Details

The Bareknuckle takes the muscular design of the 0777 and wrings out all the water weight. Its slimmed proportions give the knife a lean, sinewy look: still stylish, just more severe. They also make the Bareknuckle feel neatly compact, especially when closed.
Open, the blade measures 3.6 inches and every bit of it is usable edge. The plunge grind intersects the sharpening choil tidily, and the geometry of the handle allows the edge to stretch almost all the way to the oversized pivot. Compared to the Spyderco Endura (or Pacific Salt pictured below), the Bareknuckle has more usable blade length despite being a half-inch shorter overall.

Although the blade shape is unlike anything else I’ve ever used, I came to like it quite a bit. If I had to classify it, I’d go with “modified wharncliffe.” The edge is mostly straight except for a short, slight kink right in the middle. It doesn’t cut with the effortlessly precise tip control of a true wharncliffe, but it also isn’t anywhere near as inconvenient to work with on a plate or cutting board. Thanks to a high flat grind and reasonably thin blade stock, it slices quite well. Overall, it’s a nice compromise for a general-purpose EDC knife, especially if you want a pointy tip that isn’t so delicate you have to baby it.

Interestingly, I found the Bareknuckle’s unusual blade shape particularly easy to sharpen. The straightaways at the tip and heel of the blade made it simple to register the edge against a stone, and the belly (always a challenging part for me) was small enough I didn’t even get a chance to struggle. It helps that the steel here, Sandvik’s 14C28N alloy, is a real joy to sharpen. It doesn’t have the brute wear-resistance of a high carbide steel, but it takes a positively crispy edge without much fuss.

Handle, Ergonomics, & Pocket Clip

KAI have been riffing on this handle design for years now, and I can see why they keep coming back to it. The angular “humpback” in the spine keeps the flipper tab out of the way when closed, and provides a comfortable concavity for the thumb to rest in when open. The finger choil doubles as a cutout to access the sub-frame lock, and stops the knuckles from riding up against the flipper tab. The milled lines in the handle give the smooth anodized aluminum a pleasant tactility, and flow nicely with the facets of the blade.

There’s not a millimeter of wasted space anywhere on the Bareknuckle’s handle. It’s so tightly matched to the blade – and the blade has so much edge – that folding the thing up feels like some trick of non-euclidean geometry. In use, I found myself wishing for either a little less blade length or little more handle. The tip feels awkwardly far away in a saber grip, and the way the handle tapers through the palm feels slightly insubstantial, though not uncomfortable. I preferred using it in a pinch grip, which the concave pivot accommodates perfectly.

Pocket clips have always been KAI’s biggest bugbear. They make so many variants I’m sure some of them are fine, but all the clips I’ve experienced from the company were either functional but odd (Leek), mediocre (Cryo, ZT 0801), or good but borrowed from another designer entirely (Strider, Emerson, Hinderer collabs).

As for the clip on the Bareknuckle, well, it can be great. Just not the way it comes from the factory. Fresh out the box it had too much spring tension to work predictably without an assist from the other hand holding the pocket taut. Luckily, it’s a dead-simple fix: some careful prying from my Victorinox Bantam’s combo tool and the clip now slides onto my pockets thoughtlessly. The Bareknuckle actually carries quite well – it’s lightweight for its size at just 3.6 ounces and slim enough to tuck out of the way.

Deployment & Lockup

The Bareknuckle employs KAI’s sub-frame lock: a heavy-duty lock bar integrated into a lightweight handle. Combining the rigidity of a frame lock with the weight savings of a liner lock is an appealing idea, and the tech is admittedly cool-looking. I just think it’s a bit over-engineered. Other than maybe a marginal increase in strength, I don’t see what advantages a sub-frame lock has over an inset liner lock.

And unfortunately, a sub-frame lock is also susceptible to the same problems as a typical frame lock. Since the lock bar is exposed, it’s easy to unintentionally put pressure on it, pushing the detent ball into its hole and ultimately making the blade harder to deploy. When the Bareknuckle was new the detent was punishingly stiff – there were times I absolutely could not open the knife, especially if my hands were wet or sweaty.

Thankfully, after a few weeks it broke in dramatically. The lockbar lost its sensitivity to pressure, and the detent was tempered. Little details here – like the “landing pads” for your finger behind the flipper tab – go a long way towards making the lengthy break-in period more agreeable. Now the action is every bit as crisp, confident, and fast as anything from Zero Tolerance.

Kershaw Bareknuckle Review – Final Thoughts

I mentioned it once already, but it bears repeating: the Bareknuckle is the first USA-made Kershaw to eschew assisted opening in over a decade. The knife market looks very different than it did ten years ago. Consumer expectations have changed. Chinese startups are jockeying for position against American stalwarts. Social media has given knife enthusiasts a louder voice than ever. The Bareknuckle is undoubtedly a product of these pressures: a manual action ball-bearing flipper, competitively priced, with a famous (among knife nerds, that is) design heritage.

The Bareknuckle is the most appealing iteration of the 0777 yet. If you like the design, you shouldn’t hesitate to buy it; it’s worth the $60-$70 asking price. But as much as I appreciate the knife, I don’t think it’s going to be the one to break Kershaw’s Speedsafe habit – it requires too much patience and practice for a knife novice. For all the griping they elicit from enthusiasts, at least Speedsafe knives don’t ever need to be held a special way to work properly. Still, the Bareknuckle is a good knife, and a leap in the right direction for Kershaw.

Kershaw Bareknuckle Pocket Knife (7777); 3.5-Inch Stonewashed 14C28N Steel Blade; 6061-T6 Anodized Aluminum Handle; KVT Ball-Bearing Opening; Flipper; Sub-Frame Lock; Reversible Pocketclip; 3.4 oz

Classy, exciting, matte gray 6061-T6 anodized aluminum handles distinguish the knife amongst others. The striking color combination and contrast is impressive and sure to catch the eye of an admirer
Opened manually the old-fashioned way, the KVT ball-bearing opening makes the Bareknuckle smooth, safe, secure, fast, quick, convenient, and protective to deploy
The all-black, black oxide coated hardware along with the intricate, oversized pivot adds to the interest and stunning design of the knife. A slim backspacer adds another element of classic style
Sandvik calls 14C28N the overall highest performing knife steel and still maintains the productivity benefit of being fine-blankable. The strong blade with a long, piercing tip defines the knife
The stonewashed finish on the blade offers a rugged, tough, worn-in, roughed up look that works to hide fingerprints, dirt, scratches, use, wear and tear

Editor: I recommend purchasing the Kershaw Bareknuckle from Amazon or BladeHQ. Thanks for reading.

Bestech Fanga Review

by John Burridge Leave a Comment

I love me a big knife. I particularly love a big, well designed knife. I recently acquired two similar big folding knives, and I’m going to do a full review of one and complain about the other one.

Buy the Bestech Fanga at BladeHQ

The Bestech Knives Fanga is the newest design from Polish knife designer Grzegorz Grabarski (AKA Kombou on Instagram), who’s on a real hot streak lately. In the last couple of years, a total of seven of his designs have been produced by BRR Knives in Poland, Custom Knife Factory in Russia, and five models from Bestech in China. Bestech’s website describes their company as “a professional manufacturer and exporter of medium and high quality knives in China for OEM in the past 10 years.”

I had never heard of Bestech until about a year ago, but apparently they’ve been making knives for other brands for a decade. Everything I’ve seen of theirs has been very well made, particularly the Bestech Malware, which I previously reviewed. The Fanga is also his least expensive folder to date, with the G10 handled version retailing for $80 and the carbon fiber/G10 version (the subject of this review) for $102 at BladeHQ.

General Dimensions and Blade Details

The Fanga is indeed a big knife at 9.375 inches (238 mm) open, weighs 4.75 ounces (135 grams), and has a 4 inch (102 mm) clip point blade that brings to mind a scimitar or Bowie knife. Research into scimitars and Bowie knives led me down a very deep internet rabbit hole, and when I climbed out I had two salient pieces of information:

1) curved blades are designed to aid in draw cuts, where the blade is being pulled across what it’s cutting. The outward curve of the blade not only provides a longer surface area to cut with than a straight edged blade of the same overall length, but the curved shape is also ergonomically designed to cut deeper than a straight blade when using a slashing motion. And

2) searching for information on Bowie knives led me to YouTube videos of the Mountain Dew drinking maniac Tom O’Dell on the QVC Cutlery Corner cable TV show from the late 90’s / early 2000’s. He would say “bowie” a hundred times an hour with amazing enthusiasm: “We have a set of 14 B o o o o o – ee knives with genuine jigged stag bone handles and top quality mirror polished stainless steel for only $39.99!” I have fond memories of watching that show at 2am in the 90’s- and now, even without the bong, it’s still captivating viewing.

The blade has 3.875 inches (98 mm) of sharpened edge, and it’s made of D2 tool steel. D2 was patented in 1927, and was primarily used for industrial cutting tools until the mid 1960’s when it started showing up in high-end knives of the time. D2 is a good middle of the road steel. It’s not quite rust-proof stainless steel (not enough chromium), it’s not as fine-grained as modern powdered steel (not easy to sharpen to a fine edge), but on the upside it’s a pretty “hard” steel, meaning it can take a lot of abuse without deforming. That quality of hardness gives D2 good edge retention, but is notoriously hard to sharpen to a very fine edge. I’ve been able to get a good sharp edge on mine using my Wicked Edge sharpener, but I had to resort to using a very coarse 400 grit stone to smooth out some slightly rolled sections of the edge. I usually only need much finer grit stones like 800 and 1000 grit for touch-ups on knives with premium modern steels.

The last decade has seen an explosion of new varieties of blade steel, and I think I know why. I started getting into pocketknives in the late 90’s when my father got me the Spyderco Civilian I’d been wanting for my birthday- thanks again Dad! I told him to go into Chicago Cutlery and ask for the scariest looking knife in the store- which, in 1997, was unquestionably the Civilian. The blade was stamped “GIN-1 STAINLESS”. This was towards the end of the pre-internet dark ages, so investigating the blade steel meant a trip to the library and checking out a book on metallurgy. So I lazily assumed whatever steel knifemakers used was the most appropriate steel.

I didn’t think much about it until 2012, when I bought a DPX Gear HEST/F with a D2 tool steel blade, which sounded really cool. I decided to look up the comparative properties of D2 online, and was shocked to learn that D2 wasn’t the greatest blade steel ever invented. Between 1997 and 2012, the internet had matured into a snarky criticism/pornography e-commerce platform that highly values new products. I learned about S30V and many other new blade steels that were becoming popular thanks in no small part to the internet’s hunger for new, improved things.

So, to keep up in modern business, new powder metallurgy “super steels” like M390, S110V and Vanax 37 have become the steels of choice for high-end knives. Now, D2 blades are generally relegated to lower-priced knives. In fact, the last D2 steel knife I bought was the OKC Carter Prime, which was disappointing in so many ways. But the Carter Prime is not the knife I’m going to complain about…

Handle, Ergonomics, and Pocket Clip

The G10/carbon fiber handle is long, fat, and heavy, and fits my medium-large hands very well. As my daily EDC over the last month and a half, I’ve done a lot with it. I prepared an entire BBQ meal with the Fanga. It’s blade shape and the fact that the blade edge is higher than the bottom of the handle preclude it from being good at dicing onions, but it hacked open the packaging on the sausages and sliced the rolls just fine.

I needed to chop down a recently deceased banana tree in my yard, and why use a saw or machete when I have this bigass knife in my pocket? It was like cutting through seven inches of tough, soggy celery, and I gained a practical appreciation of the handle size and shape. The index finger cutout, along with the wide, flat thumb rest above the pivot, gave me surfaces to push and pull against as I sawed the banana trunk into sections that would fit into my yard waste bin. Afterwards, the knife and I were covered in bitter banana sap, so I cleaned us both with a garden hose. I was hoping that the Fanga’s machined G10/carbon fiber handle and G10 backspacer would be less slippery when wet than an all-titanium handled knife, but it was about as slippery as my titanium Sebenza.

Most of the time G10 appears on folding knife handles, it’s a flat slab with a square grid pattern molded or machined into the surface. It feels great and provides excellent traction, but looks boring. Notable examples of this are a lot of Spyderco knives, the Rick Hinderer XM series of knives, and pretty much every Emerson knife. But on the Fanga, this material is sculpted in a creative, organic way you that you feel more than you see.

Kombou, the designer of this knife, has added his signature design cue of several little scalloped cuts on the top of the handle behind the pivot. I’ve noticed this design in four of his other knives (the Ornetta, Volta, Kamoza, Bragga, and Buwaya) and I now notice a signature naming convention as well- all of his knife names end with an “a”. I really like his design aesthetic. It’s not quite as distinctive as knife designer Elijah Isham’s style but I find Kombou’s knives to be more practical. Like Isham, Kombou does 3D computer design, not physical knife making, and a close examination of the Fanga reveals many well-executed small details, like the deep blade fuller that can be used to open the knife like you would open a traditional slipjoint.

The pivot collar and the pocket clip are made of the same blue anodized titanium, and both have style. The pivot collar is subtly cone shaped, and the angle at which it rises above the handle matches the angle of the pivot screw, resulting in a volcano shaped pivot. The clip has a unique organic shape that compliments the shape of the handle. It also has a sufficient height above the handle to easily slide onto both my thickest denim jeans and my Triple Aught Design Force 10 AC pants which are extremely thin, but indestructible. The amount of flex in the clip has held on tight to everything I’ve worn in the six weeks I’ve been carrying the Fanga.

I scratched the anodizing on the clip somehow, and the blue anodizing is showing some fading on the edges. My Fox Knives Phoenix has similar blue anodizing and even more pronounced wear, but that’s also not the knife I’m going to complain about…

Deployment and Lockup

The Fanga stays open by utilizing a steel liner lock, which contributes to it’s weight. As D2 steel has gone out of fashion in high-end knives, so have liner locks been replaced by frame locks. I personally love a well done liner lock because it allows the handle design to be symmetrical in shape and materials. A frame lock knife, like the Chris Reeve Knives Sebenza, by definition must have a steel or titanium handle on one side that functions as it’s locking mechanism.

The design of the “lock side” of a typical frame lock knife is dominated by the lock. If a knifemaker wants to use a material other than steel or titanium for the non-locking side of the handle (the “show” side) they can use G10 or micarta or solid gold, but there’s no way to have symmetry of materials on both sides of the handle unless you use steel or titanium. Thanks to it’s liner lock, the standard Bestech Fanga has symmetrical G10 (or G10/carbon fiber) handles on both sides.

The lockup is solid with no blade wiggle, and the combination of the wide, heavy handle and thick blade stock prompted me to test the overall strength of the knife. My banana-watering garden hose burst at one end so I seized the opportunity to cut it with the Fanga. It took all my strength to cut through the extra-thick hose, so for the sake of science I sharpened it and cut a couple more slices much more easily.

The Flipper detent is a little stronger than I’m used to, meaning that it takes a bit of effort to get the flipping motion started. Once past that initial resistance it flips open smoothly on it’s ball bearing pivot system. It’s a big heavy blade and the detent feels appropriate to get that much mass moving and locked into place. I have never failed to completely flip it open using a normal index finger technique or by my wrapping my thumb over the top like a front flipper knife.

Every surface on the Fanga that’s able to be touched is chamfered or rounded a little bit, with the exception of a sharp two inch portion the back side of the liner lock, which is a) only exposed when the knife is locked open, and b) not sharp enough to cut you anyway. I would call that a design flaw, but that’s nothing compared to the design flaw of the knife I’m going to be complaining about, the Spyderco Tropen.

On paper, the Tropen is practically the same as the Fanga with the exception of the Tropen having better blade steel. Their weight, handle size and shape, blade size and shape, and full flat grind are very similar to each other. It’s in the differences between them where the Tropen falls short. The flipper tab’s pointy top jabs into your finger, the polished G10 handle scales are slippery even when dry, and the liner lock that keeps the knife open is only 1mm, while the Fanga’s liner lock is almost double the thickness at 1.8mm. In the picture it looks like the liner locks are the same size, but I bought digital calipers specifically so I could bitch about this and I assure you the measurements are accurate.

I also replaced the pocket clip with a $26 MXG Gear deep carry clip, but that was an aesthetic decision on my part. In my opinion, Spyderco knives are like Glock pistols: they’re usually OK right out of the box, but if you really want to get the most out of them, you have to install some aftermarket accessories and tinker with them a little. My Tropen had two serious problems when it was in the closed position that definitely required some tinkering.

First, the detent keeping the Tropen closed was so weak that it opened in my pocket several times. To remedy that, I turned to YouTube and learned how to increase the detent by taking the knife apart and using a dremel tool to enlarge the hole that the detent ball rests in. The second problem has perplexed me and the knife nerd community in general- when the knife is closed, there’s a half inch of sharp blade exposed next to the lock mechanism. The only fix is to dull the back end of the blade with a file. I haven’t cut myself on it yet, and I’m leaving the end the butt end of the blade sharp just to see if it actually does cut me while I’m holding it in my pocket. I’m willing to trade the pain for the knowledge.

Finally, the Tropen costs about $100 more than the Fanga. The only reason I bring up the Tropen at all is to make my final point about price versus value.

Bestech Fanga Review – Final Thoughts

Warren Buffett said this about price versus value:“Long ago, Ben Graham taught me that ‘Price is what you pay; value is what you get.’ Whether we’re talking about socks or stocks, I like buying quality merchandise when it is marked down.” When I first held the Fanga in my hands, I was surprised that this knife only cost $102, and the regular G10 version $80. The fit and finish, at least to my untrained eye, are excellent. That’s a lot of value at a low price. There are many quality knives out there that cost approximately the same amount, but I haven’t seen one that has this much style and meticulous detail plus a milled pocket clip at this price.

I bought the very similar Spyderco Tropen (which is also made in China by the way) for approximately double the price, and it ended up costing me even more in parts and labor. Despite it’s higher price, I feel like it’s value is significantly lower than that of the Fanga. The Bestech Fanga is, in my opinion, a great all-around knife and a tremendous value for the money. I recommend it.

Lastly, while fact-checking this review with the designer, Kombou, he told me that he has recently quit his regular 9 to 5 job to become a full time Product Designer for Bestech. My congratulations to him and to anyone who gets paid to do what they love. Keep making cool knives (with good value) and I’ll keep buying them.

Bestech Knives Fanga – From $102.00
From: BladeHQ

Editor: I recommend purchasing the Bestech Knives Fanga at BladeHQ and Amazon. Thank you very much.

About the Author: This guest review was written by John Burridge. John Burridge is a Los Angeles-based lover of knives and other dangerous toys. He spends his days trying to make the world a better place by slipping subversive humor into reality TV shows. And playing with cats. He can be found on Instagram as @bunrudge.

Cold Steel Bush Ranger Lite Review

by Josh Wussow 4 Comments

Time to face it, fellow knife nerds – We’re living in an era of over-saturation. With so many companies releasing a deluge of new designs, it’s difficult to pluck the hits from the static. But after months of blade malaise, something interesting caught my eye – A cheap, rugged looking, aggressive green monster with a nifty locking mechanism. It’s the Cold Steel Bush Ranger Lite, a budget iteration of the company’s $200-plus outdoor original. After several months of testing, one thing’s for certain: Of all the Cold Steel knives I’ve handled, the Bush Ranger Lite is definitely the Cold Steel-iest.

Buy the Cold Steel Bush Ranger Lite at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

As you’d expect from a sub-$30 knife, Cold Steel has chosen fairly basic materials. The handle is comprised of 4.875-inches of Outdoor Green GFN, measuring more than half an inch thick (0.65”). The flat ground 8Cr13MoV blade features a satin finish along the length of its 3.5-inches, with a tallness of 1.75 and a thickness of 0.65, respectively. Overall length and weight sit at 8.375-inches and 4.8-ounces. The forward swedge flows gracefully into a bowie-style clip point, giving the Bush Ranger an elegantly aggressive appearance.

If these handle scales look familiar, you’re not wrong. The Bush Ranger’s outline is very similar to the Cold Steel Finn Wolf, a Scandi-ground folder I reviewed a couple years back. If you squint, these are almost the same knife. But while the Wolf’s grind lands it in the outdoors-only curriculum, the Bush Ranger’s mandate is decidedly more gen-ed.

But speaking of outdoor credentials, here’s an interesting note – The Bush Ranger Lite will strike a ferro rod. Even in a closed position, this pocket knife is more than capable of casting sparks. This is certainly safer than previous folders I’ve used to make fire, since I was always concerned about applying force to the back of the blade.

Handle, Ergonomics, and Pocket Clip

The Bush Ranger fits perfectly in my medium/large sized hand. The hook on the back end rests perfectly against the heel of my palm, creating a feeling of security. Balance is good, and at no point did I encounter any hotspots.

Despite the squared-off spine, the backside of the Bush Ranger’s blade provides a generous, comfortable place to rest your thumb. There are some rough edges on the underside of the GFN, but nothing out of bounds for this price range.

The pocket clip is small, tight, and unobtrusive. This is by no means a deep-carrying tool, but the clip performs adequately and disappears against my palm when the knife is in use. There’s no flat resting surface under the tongue, however. This means that your pocket seam will be slowly digested as it drags across the textured handle. Cold Steel has also opted for tip-up only carry, reversible to the left or right side. This, along with the lefty-friendly nature of the lock, makes this a truly ambidextrous knife.

As for the actual ride, the knife carries surprisingly, well, Lite. Don’t get me wrong – The footprint is massive. It shared my right front pocket with my wallet and pen, and there was no mistaking its presence. That being said, the airy nature of GFN made this an area problem only, not a question of mass. It was also surprisingly benign in daily activities, such as walking, sitting, and climbing ladders. At no point did I feel that the Bush Ranger limited my flexibility. Until reaching for my wallet, of course.

Deployment and Lockup

For the longest time, the keystone of the Cult of Lynn Thompson (h/t Advanced Knife Bro) has been the sacred Tri-Ad Lock. Of all the mechanisms in the hobby, this one seems to have the most fervent devotees. While the Bush Ranger Lite isn’t technically a member of the Tri-Ad tribe, it does boast another interesting innovation from Cold Steel – The Rocker Lock. That’s the sliding piece you see on the show side of the blade. Here’s a look at it stripped down to bare metal:

As the breakdown confirms, the Bush Ranger is lacking the signature stop pin of the Tri-Ad. However, the Rocker’s additional sliding stop adds a sense of solidity to the traditional back-lock mechanism.

I will say this – This knife benefited greatly from its initial disassembly and maintenance. It was noticeably stiff out of the box, running dry on its Teflon washers. Some cleaning and a little oil worked wonders, and the Bush Ranger became a much smoother operator. The CLACK its lock snapping into place is a mildly addictive sound.

Closing can be a bit trickier. Cold Steel’s locks are notorious for their stiffness, and this is no exception. And because of the lack of a forward finger choil, this is really a knife that requires two hands in order to close safely. Otherwise, you risk shaking that sharp edge down into you knuckle, which would only be exacerbated by the tendency of back-locks to snap shut with authority.
In daily use, I found this to be an eminently capable all-around cutter. From food prep to package duty, the Bush Ranger was a solid companion. But this is a Cold Steel, after all. So, what sort of tester would I be if I didn’t at least attempt to baton with it?

The surprise isn’t that the knife got stuck. I intentionally used a piece of wood that was larger than a pocket knife should be able to tackle. The shock was what happened after I hammered, pulled, and pried the Bush Ranger loose. I disengaged the rocker tab, pressed down the back-lock, and the knife closed as though nothing had happened. I opened and closed the knife several times, just to be sure I wasn’t losing my mind. Blade play? Zero. Centering? Dead-on. Not even so much as a roll on its 8Cr edge. The FRN handle held up to the prying as well, with no new gaps developing around the back spring.

Here is a parting size comparison with the Spyderco Native 5 and Mora Companion:

Cold Steel Bush Ranger Lite Review – Final Thoughts

The Bush Ranger Lite is, without question, the toughest budget blade I’ve come across. It’s rugged, well built, and perfectly suitable for everyday abuse. And from a sheer bang-for-buck perspective, I’m not sure there’s another knife under $30 that gives you this much blade, handle, and versatility. Sure, the materials are basic and the design isn’t for everyone. And if you spend even part of your time in an office, it probably isn’t the blade to use in the break room. I certainly raise a few eyebrows when I pulled this clip-point monster out of my pocket.

But under almost any other circumstance, the Bush Ranger Lite is a heck of a tool. Buy one, beat the heck out of it, and get another if it breaks. Overall, I this is an outstanding budget effort from the cult of Cold Steel.
Links

Sale

Cold Steel Bush Ranger Lite 3.5" 8Cr13MoV Blade 4.875" GFN Handle Everyday Carry Hunting Folding Knife w/Rocker Lock - Boxed

DURABLE BLADE - The Bush Ranger Lite folding knife features a 3 1/2" Sheffield clip point blade; Crafted from durable 8Cr13MoV steel, this blade strikes a balance between sharpness and resilience, making it an excellent choice for various cutting tasks
COMFORTABLE HANDLE - Comfort is paramount in the Bush Ranger Lite's design - The handle is expertly contoured and made from glass-filled nylon (GFN), providing a secure and comfortable grip; The ergonomic design ensures extended use without discomfort
EASE OF OPENING - Designed for practicality, the Bush Ranger Lite incorporates a thumb stud for quick and effortless blade deployment; This feature ensures easy access to the blade, allowing for swift and efficient use in a variety of situations
ROCKER LOCK - Prioritizing safety, Cold Steel equips the Bush Ranger Lite knife with a state-of-the-art rocker lock; The inclusion of a secondary safety feature enhances resistance to shock and impact, ensuring a secure and reliable lockup during use
SPECS - Weight: 5.2 oz (147.4 g); Blade Thickness: 3.8 mm; Blade Length: 3.5"; Blade Steel: 8Cr14MoV Steel; Handle Length/Material: 4.875" GFN; Overall Length: 8.375"; Knife Type: Folder; Blade Shape: Clip Point; Locking Mechanism: Rocker Lock

Editor: I recommend purchasing the Cold Steel Bush Ranger Lite from Amazon or BladeHQ. Thanks for reading.