micarta

ESEE-6 Review

It has been a while since I’ve reviewed a large fixed blade. Regular readers know I’m in S.W. Florida. It’s a nice place to live, but it’s not exactly a mecca of bushcraft. I mostly moved here to be by the beach. The land itself is either dry and scrubby, or dank and marshy. It’s a beautiful place to live in it’s own way, but was one of the last places in the USA to be settled for a reason.

Buy the ESEE-6 at BladeHQ
Buy on Amazon

And while I enjoy trimming trees on our tiny 1/4 acre lot and even having a bonfire a couple times a year, I’m no Ray Mears. Plus, I already have my big bushwacker – the ESEE Junglas. I’ll probably be buried with that knife. Maybe sooner than later depending on how this coronavirus plays out. Regardless, it’s my go to yard tool, and I’ve had it for almost a decade. Why mess with success?

Well, when you run a site like this, people have certain expectations. And they vary somewhat wildly. Since I’ve reviewed some outdoor fixed blades in the past (aka “survival knives“), some visitors may believe that I am duty bound to keep that section updated. And they make a good point.

So I want to keep reviewing survival knives. I enjoy them even if I can’t use them as much as I would like. So take the review with a pinch of salt. I don’t proclaim to be a bush master. I’m just a schlemiel with a knife review website and too much time on his hands.

One knife we have been missing from the website for years is the ESEE-6. And frankly, it’s missing from my understanding of the ESEE lineup as well. I’ve reviewed the smaller ESEEs, and the big Junglas, but haven’t touched anything between the 6 and 4. I’ve had Chad write on the ESEE-4, and Josh write on the Laser Strike, but I have to understand these knives as well. So here we go, a long needed review of the ESEE-6.

General Dimensions and Blade Details

The ESEE-6 has an overall length of 11.75″, a 6.5″ blade, and the knife itself weighs 12 ounces. This is a pretty big knife. It’s not a Junglas, which is more of a fortified machete, but it’s still pretty damn big. It could be a good choice if you are looking for something that packs a whallop for chopping tasks, something that can baton pretty big pieces of wood, yet is still reasonably packable, and is also usable as a knife rather than a machete or small sword.

Certainly this would be a good camp knife. It can carve, cut and chop with the best of them. And it’s stout. ESEE knives. are tough, and this ESEE-6 is almost 5mm thick.

Here is a family portrait with my Junglas and ESEE-3 for reference:

It could also be used in certain martial applications. While it’s not a dagger, I think this 6″ blade has pretty good reach for a hog hunt or in an emergency. So the ESEE-6 strikes me as a large all-round utility / combat knife. The trade off is the size and weight. I wouldn’t take this on the Appalachian Trail, but if I needed something robust for a camp out or day hike, then the ESEE-6 could be a good choice.

Let’s turn to the blade. Here you get 6″+ of powdercoated steel. The shape is ESEE’s classic drop point. It’s a subtle drop point, offering about 3″ of straight edge and a good 3″ of curving belly as well. Lots of room to work with the ESEE-6. The blade is simple. It’s fully flat ground and there are no swedges or anything like that.

Blade steel is 1095. 1095 is high carbon steel, and is the same steel found on their regular lineup. For those who don’t know, 1095 is not a stainless steel. In exchange for being not-stainless, you get a tough high impact steel that is easy to sharpen. 1095 holds a good edge when used on wood. I find it dulls pretty quickly when used to cut material like cardboard. However, it is very easy to sharpen. That said, you will get good life out of the edge assuming you will be using this knife more for wood and food prep rather than breaking down a pile of boxes.

The entire knife comes with ESEE’s thick powder coat. The offer the coating in various colors, but I prefer the classic look of black powder coat. I took pictures of this knife before I started using it. You can see how the coating looks new, and you can see on my Junglas how the coating will hold up after years of use. It wears pretty well, but it isn’t invincible. It will do a good job of keeping rust off of most of the knife.

Here’s another size comparison. This time I have it next to the Fallkniven A1:

It compares favorably to the A1, friends. That’s why I selected it. Also, both knives are quite thick.

Back to the blade. In practice this is an extremely capable knife. It’s big enough for significant chopping and batoning tasks, but it’s still small enough to use as a knife. Not my first choice for peeling potatoes, but you can certainly chop them up, whittle, etc. The trade off is that the ESEE-6 is significantly heavier than a knife like the ESEE-3. But with the 3 you won’t be chopping, and unless you are a talented woodsman you are going to have a hard time batoning anything significant with the ESEE-3 either.

Handle and Ergonomics

My ESEE-6 came with gray linen micarta handle scales with red liners. It’s a handsome look, and the gray linen micarta is beveled for comfort. ESEE also offers G-10 handles if micarta isn’t your thing, and their extra handle scales are reasonably priced.

Personally, I like the way micarta wears, and it offers excellent traction even when your hands get wet or sweaty. This is a full tang knife, meaning the blade and handle are one continuous piece of steel, and that tang extends down to the pommel. This provides room for both a lanyard hole and am impact tool. You can crack walnuts or crack skulls depending on what the situation requires. Nice.

The ESEE-6 comes with a comfortable “Cadillac” of a handle. There is plenty of room, and there is a forward finger choil if you need to choke up on the blade. The micarta handle fills the hand and offers plenty of traction. ESEE included an inch or so of jimping on the spine of the blade. It’s aggressive jimping and is the kind that is better suited for gloved hands. Personally, I find the jimping to be a bit much for a naked hand, but that’s just me.

In practice I found this handle to be comfortable for extended use. This whether you use gloves or not. I tend to avoid gloves and did not run into issues with hot spots. The jimping I could live without, especially for crunching cuts, but I understand why ESEE put it there. All in all, it’s a comfortable handle. However, I prefer the edge radiusing (contouring) on the handle of the Junglas over the ESEE-6.

Sheath

The ESEE-6 comes with a high density thermoplastic sheath. It’s riveted and is built similar to a kydex sheath (pancake style). As usual, the quality is there. The sheath is nicely finished and holds the knife securely in place. There is a small amount of rattle, but nothing crazy. It takes a fair amount of force to pop the knife out of the sheath with your thumb, and ESEE included a short run of serrations on the sheath for that purpose. This knife is not coming out accidentally. They also included a drain hole in the bottom of the sheath and plenty of rivets for mounting options.

While you can lash this sheath to something or use MOLLE clips, I suspect most people will want to use the included belt clip. It mounts easily and securely to the sheath with the included hardware and allows for amibidextrous up or down carry. All the components of the sheath and belt clip are simple and of high quality. The plastic is dense, the steel clip offers a good blend of ease of use and high spring strength, and everything is set up to provide years of trouble free use.

Here is a better shot of that spring clip. The spring clip easily slides over a belt, so you can add or remove the sheath without taking your belt off. Once you have a sheath with a clip like this, it’s hard to go back to your standard sheaths with a belt loop.

ESEE-6 Review – Final Thoughts

Once again ESEE demonstrates their ability to make a high quality fixed blade knife and sheath. Everything is thoughtfully designed, made of high quality materials, and finished neatly. Oh, and it has all been made in the USA and is backed by one of the most comprehensive warranties in the business. They are on the expensive side, but I’ve found when you buy an ESEE fixed blade you are going to get a no-bullshit product that is designed for the long term. My Junglas and ESEE-3 are excellent examples of that, and I’m happy to add this ESEE-6 to the permanent collection. I have no doubt that it will serve me well for years. That said, if something happens I’ll update the review.

Perhaps the hardest part of selecting a knife within the ESEE catalog is settling on a single piece. The ESEE-6 is substantial, so that’s arguably it’s biggest potential problem. If you are looking for a knife to take on extended hikes, then you will likely want to give this one a pass. But if you are looking for something to use on a campsite, or packed into a truck, or even used in the yard, then I think the ESEE-6 has a lot to offer. Also, while I’m fond of my Junglas, it’s not usable as a knife. The ESEE-6 strikes more of a balance between a compact chopper and a utility knife.

ESEE Knives 6P Fixed Blade Knife w/ Molded Polymer Sheath

Editor: I recommend buying the ESEE-6 at BladeHQ or Amazon. Thank you for reading.

Bark River PSK Review

by Josh Wussow 6 Comments

In the world of fixed blades, few names carry as much clout as Bark River. They’re a mainstay in the outdoor community, with a reputation for high-quality, American-made blades. But, how far down can one distill their legacy? I aim to find out with a review of the Bark River PSK.

Buy the Bark River PSK at KnivesShipFree | BladeHQ

Short for “Personal Survival Knife,” this diminutive entry bills itself as a perfect backup to your full-sized outdoor companion. The makers have used their knowledge and top-notch materials to pack as much utility as possible into the smallest practical space. I’ve cooked, hiked, and tooled around with the PSK for a few months now, and my thoughts are, well, complicated.

General Dimensions and Blade Details

Look – I’m going to try to keep this review from being one continuous short joke. But, let’s discuss the elephant in the room – Despite owning, carrying, and using an ESEE Candiru on a regular basis, the PSK immediately struck me as undersized. This is especially true when you factor in its $150-ish price tag.

That being said, there’s still a lot to like throughout the PSK’s 5.25-inch span. Bark River has fitted this full tang blade with burgundy Micarta scales, leaving 2.25-inches of satin Elmax up front. Two of these inches are sharpened, with a drop point design sloping down from its .08-inch thickness. This results in a convex edge, a grind well known for its versatile nature and outstanding durability.

But, while convex edges may be Bark River’s stock and trade, this is my first knife with this particular grind. I found it to be eminently capable, from wood carving to food prep and everyday chores. The sharpening anxiety is real, however. Elmax is definitely a long-wearing steel, but I’m concerned about my ability to sharpen this knife with my current equipment. The blade’s converging slopes require an abrasive surface with a little give in it, allowing you to gently roll the knife while honing the edge.

I know you can use sandpaper and a mousepad to preserve the curve but… Come on. This is a $150 knife, and I feel weird about sharpening it with products from Ace Hardware and Staples. That’s my hangup, though, not the knife’s.

Handle and Ergonomics

Ergo’s can be trick when it comes to small knives. Compact frames and tight tolerances leave less room for error. Thankfully, Bark River knows their craft. While the 3-inch handle is smaller than the blade on my Kizer Begleiter, the PSK manages to fit snuggly in my medium/large hand. This is due in part to its 0.38-inch thick handle and 1.45-ounce heft, which gives it a feeling of solidity lacking in the stock Candiru.

Here’s another advantage of the PSK: Thanks to its squared-off spine, this knife can be used to strike a ferro rod. It’s a nice touch on a blade with “Survival” in its acronym. I was able to get a small fire going in just a few moments, despite some fairly damp conditions.

The lanyard hole is nicely finished, as well. I’m not a lanyard person in general, but these small knives definitely benefit from a little cordage out back. But, while basic paracord looks natural on the bare frame of the ESEE, the fine handles on the PSK would probably benefit from a strip of nice leather.

Sheath

Bark River’s material quality carries over to the sheath. This is one of the best made leather items I own, size be damned. It’s thick, solidly stitched, and well finished. There was a definite break in period at the outset, however. I had to force the knife in the first time, after which it took quite a while to work its way out. But, as with all leather sheaths, it’s loosened over time.

The bigger issue here is, “Where do you carry it?” While I was (barely) able to fit my belt through the loop, this isn’t a comfortable carry outside the pocket. Wait – That’s not entirely accurate. A better way to put it is that, given the size of the knife and the depth to which it sits in the sheath, it’s very difficult to draw and return the PSK when it’s riding on my belt. The angle of reentry can be tricky, and I was always concerned that I’d slip and stab myself in the thigh.

Honestly, I think a pocket clip stitched into the leather would have been a better call here.

Bark River PSK Review – Final Thoughts

Here’s what it boils down to: The PSK is a well-crafted, aesthetically pleasing, and surprisingly capable small fixed blade. It handled everything I threw at it without issue. The design is on-point, even down to the blade etching and colorful liners.

But, no matter how much capability you pack into these two inches of blade, it’s still a very small knife. It’s also tricky to carry, odd to sharpen, and more than twice the price of the similarly-sized Candiru.

We should also mention the warranty. Bark River offers a lifetime guarantee against manufacturer defects, which should put you at ease when it comes to actually using the PSK. But again, this isn’t as comprehensive as the “No questions asked” coverage you get from ESEE.

In the end, I’ve struggled to find the target audience for this blade. Outdoorsy folks will probably want something larger, unless they’re comfortable keeping $150-worth of backup knife in their packs. Kids and collectors, maybe?

The PSK reminds me of a small plate of food prepared by a world-class chef. No matter how finely crafted, perfectly presented, and delicious it may be, there’s just not enough there to quell the hunger. If you’re looking for an entry point into the world of Bark River, the PSK is an interesting piece. But for now, I’ll be swimming up a different stream.

Bark River PSK – From $134.95
From: BladeHQ

I recommend purchasing the Bark River PSK at BladeHQ, KnivesShipFree, or Amazon. Thank you for reading.

ESEE Laser Strike Review

by Josh Wussow 9 Comments

Alright, I’ll admit it – I’m a huge fan of ESEE Knives. I own a Candiru, Izula-2, and JG3, and I’ve had the pleasure of reviewing an exquisite PR4. So, when the opportunity to sample their Laser Strike model landed in my inbox, you can guess the speed of my reply.

Buy the ESEE Laser Strike at BladeHQ

Buy on Amazon

While I’m hardly alone in this enthusiasm, much of the halo surrounding ESEE comes from inside the blade-enthusiast bubble. Their American-made pedigree and bulletproof warranty are great for nerds like me, but what about the regular folks who buy their camp knives at Walmart? Tell them you spent $115 on an outdoor blade, and they’ll shoot you some pretty strange looks.

I know this, because it’s exactly what I did. After a few weekends racing around the yard, the Laser Strike’s final lap came on an overnight trip to Devil’s Lake State Park in Wisconsin. A few of my friends were testing their camping kits, and they invited me along for the ride. We had a wonderful evening exchanging questionable decisions: Me, teaching them how to baton through logs and them introducing me to, well…

Don’t drink and play with knives, kids. Now, onward before that stuff kicks in.

General Dimensions and Blade Details

In a brand known for its rugged offerings, the Laser Strike stands out as a damage-duty champ. You’re looking at 10-inches of full tang 1095 carbon steel, with a blade nearly as thick as three US quarters stacked together (0.188-inches).

The blade length is a rangy 4.75-inches, 4.5 of which are sharpened. Its flat grind features ESEE’s rugged “Black Textured Powder Coat” over a 1.38-inch width, broken only by the maker’s marks. The knife’s total weight is 9.5-ounces, which is around half as much as a youth-sized aluminum baseball bat.

Now, let me be clear about the provenance of this particular tool. ESEE was kind enough to send it to notorious Youtuber and (I’m directly quoting him here) “big piece of doo doo” Advanced Knife Bro, who agreed to send it my way after mercilessly pummeling it.

As expected, the blade arrived in need of some love. But, that’s one of the beauties of 1095 – It’s easy to whip back into shape. A quick cleaning and Sharpmaker session were all it took to bring the edge back to shaving sharp. But, with a pile of firewood in the garage and a camping trip on the horizon, it didn’t stay that way for long.

So, how did it do with fire prep? Come on – It’s an ESEE. It powered through a half-dozen camp logs without so much as a hiccup. What really shocked me was its prowess at the picnic table. Our menu on this mosquito-rich evening featured ribeye steaks and flame-grilled veggies. I was recruited to help slice onions, peppers, and mushrooms on a small cutting board, which was probably just as thick as the ESEE’s blade. Here’s how things turned out:

Surprised? I certainly was. While it’s certainly no santoku, the Laser Strike turned out to be a more than adequate prep tool. And this was after I’d batoned through several pieces of damp firewood. You won’t be producing translucent onion slices, but for rustic fare like this, the ESEE is surprisingly adept.

Handle and Ergonomics

I love the way that ESEE’s tend to hold my hand. Is that creepy? Too bad, the statement stands. The company’s canvas micarta is on point, and the forward choil fits my index finger perfectly. I also enjoyed the widely spaced jimping, positioned at the step-down transition from blade to handle. It provides excellent traction for my thumb without any discernable discomfort.

A quick aside, for the sake of comparison: I took several knives on this camping trip, including my beloved L.T. Wright GNS and the Condor Swamp Romper (which I gave away to a buddy who didn’t know any better). I encouraged my friends to handle each blade, and the Laser Strike’s scales were the runaway favorite. This could be considered anecdotal, sure, but it was interesting to get some perspective from folks who’re just getting into the knife hobby.

Now, let’s take a moment to discuss the stuff inside the handle. See that metal washer hanging from the base of the sheath? Well, it’s not just for show. This metal disc acts as a flathead driver, allowing you to remove the handle scales. Stowed within are a fire steel and a couple tinder pellets, all included as part of the overall package.

This further pushes the Laser Strike’s “Survival Knife” image, though I do have a few qualms. While certainly serviceable, this small fire steel is pretty difficult to spark. And, given the powder coat, the only available striking surface is (shudder) the blade edge. Sure, the sharpening choil might work, but I’d need to be in a real-life “Fire or I perish” sort of situation before doing that much damage to the cutting surface.

The Laser Strike has another option built in. See that divot on the right handle scale? That’s for a bow drill, allowing you to make fire in an even more bushcraft-friendly fashion. Inefficient? Sure, but 100% cool.

Sheath

The Laser Strike ships with a black Kydex sheath setup, including an ambidextrous clip plate and the aforementioned lanyard/washer combo. It’s a far cry from the leather of the Camp Lore knives I’ve been testing, falling more into the ESEE’s number-knife family (3, 4, 5, etc.).

Retention on the Kydex is good, though it’s absolutely possible to shake 9.5 ounces of knife out of its grip with enough downward thrust. Tension can be adjusted using the sliding screw and washer above the choil area, so you can tighten things up if you feel the need. I like ride height, despite my usual preference for leather danglers. It also manages to be fairly slim, making the knife carry much easier than one would expect from a blade of this heft.

ESEE Laser Strike Review – Final Thoughts

Going into this review, I had no doubts about the Laser Strike’s capabilities as a field-first tool. But it impressed me in every application, from batoning to carving to cooking. Expectations aside, part of the joy of this particular test came from the look on my friends’ faces as they watched me hammer it through our firewood, and the smiles when I handed it over and said “Give it a shot.” Being able to follow up with “You’re not going to break it” and watching them realize it was true – Man, that was a neat moment.

Sufficed to say, I’m completely sold on the Laser Strike as a heavy-duty hacker. It’s not going to replace your smaller blades for ultralight outings and day hikes, but it’s a super-solid addition to a hard-use loadout or car camping kit.

Thanks again to ESEE Knives and Advanced Knife Bro for allowing me to check it out.

Laser Strike Knife, Black Blade, Micarta Handles, Kydex Sheath

Made in: USA
Category name: knives
Made in USA or imported

Editor: I recommend purchasing the ESEE Laser Strike at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

GEC #15 Tidioute Boy’s Knife

by Aaron Shapiro Leave a Comment

I was just reading some statistics about Great Eastern Cutlery: in 2007 GEC produced approximately 7300 knives whereas in 2017 it’s nearly 30,000 pieces. This is remarkable in today’s hyper competitive EDC pocket knife market. That’s a 310% increase over ten years for a traditional knife company. Admittedly, these numbers are based on hearsay, but a glance at the production totals on GEC’s site show there’s some basis for them.

Buy the Boy’s knife at BladeHQ | KnivesShipFree | GP Knives

I’d like to think that the focus on traditional knives is born out of a perspective shift within the EDC community, perhaps away from the overbuilt tactical to the purpose-based smaller utility folders? It’s hard to say at this point, but just from observing the ripe secondary market it’s clear that slipjoint fever is on fire these days.

Today, we’re looking at the GEC #15 Tidioute Boy’s Knife, a well rounded and sized EDC slip-joint at a very accessible price point. Based around the traditional “Sleeveboard” pattern, these are sometimes also made into barlows with full steel bolsters. A “Boy’s Knife,” is generally characterized by their diminutive size (generally between 2.75″ and 3.25″ closed), the idea being these could be a child’s first pocket knife. These were most often spearpoint bladed pieces, but we’re seeing a lot of variety now in the modern iterations. But, before we get too far into that, let’s hit some specs:

Blade: 2.5”
OAL: 6.187”
Thickness: .43”
Blade Thickness: .09”
Steel: 1095 Carbon Steel
Weight: 1.8oz
Lock: Non-Locking Slipjoint

(These are my personal measurements made with my calipers and my faithful (pink) ruler. The manufacturer’s published numbers may vary.)

Blade

The #15 pattern by Great Eastern Cutlery is an amalgamation of several different knives they offer in the same size. I’m aware of a Wharncliffe version (Navy Knife), Wharncliffe with a cap-lifter/prybar type tool (Crown Lifter), Special Run Barlows (TC’s), and then the Spearpoint (Boy’s Knife) featured here. There are very likely other versions that I am not aware of out there, the world of GEC’s is deep and wide.

In my opinion the Boy’s Knife in spear point offers one of the more versatile blade shapes out of the GEC offerings. The blade has a straight back for nearly three-quarters of the length before descending into a fine point. GEC has also opted for a small swedge running nearly the entire length of the blade. I think that this offers a little dimensionality to what would otherwise be a very simple blade shape. In practice what I have found is that most of the knives that Great Eastern makes have very nice, thinly ground blades. Case in point, the #15’s blade I have has been taken down to .012 behind the edge… this thing screams through paper.

In practical use, I’ve found the #15’s blade to be a generally good fit for most of what I do. I think the spear point works well for piercing tasks and the thinness of the edge really excels for slicing. I wind up breaking down a lot of boxes at work and it only takes the lightest touch to break the tape.

As for steel, 1095 is a tried and true performer, high carbon, generally taken to 58-60HRC, I’ve had great experiences with it both in cutting and sharpening. It will stain or rust, so I’d suggest oiling the blade and spring with mineral oil or something similar (but not too much, some good use patina is cool.)

Handle and Ergonomics

The Boy’s Knife handle is a simple teardrop shape with micarta scales and a short steel bolster over steel liners. Construction is pinned. There are many options for scale material, but I opted for a micarta handle.

The handle offers a full grip for me, which is surprising to me since the knife appears to be so small on paper. The small teardrop shape doesn’t offer what I’d call a “secure grip,” but in the use case scenario for a small slip-joint, I tend to think this is more than adequate. When the #15 gets put to work cutting up cardboard boxes I’m careful with it as this is a smaller handle and the grip is not as secure as a full size knife.

I’d recommend a full size GEC if you intend to use the knife routinely for harder tasks like breaking down lots of boxes, but this knife is fine for light EDC use and the occasional package.

There is no pocket clip on this knife, so no need to comment on that. Often these knives are carried in leather slip sheathes. Either way this will be a small and slim carry.

Another option with this knife is to pick one up with a bail and chain. This is kind of like a wallet on a chain. It won’t walk off on you. Traditionally these bail knives were for sailors, and they continue to practical for marine applications and other times when you want to keep your knife on you.

Walk and Talk

Talking about the “lockup” on a traditional folder like this always presents a challenge, but I think it might be more applicable to talk about it’s fit and finish since those will directly relate.

The areas that are often talked about with traditionals generally are flushness of the spring and centering. I would expect a handmade custom Slipjoint to be flush in all three positions and perfectly centered, whereas I give a little grace to production knives.

The #15 is flush in the open and closed, but the spring does stick up a little at the half-stop. This would only become apparent if you stopped mid opening or closing to look at it. Centering, however, is right on the money.

Since this is a non-locking slip joint, we don’t talk about deployment and lockup. Instead we talk about “walk” and “talk”. The walk is the feel and tension of the blade moving against the spring, while the talk is the sound of the knife snapping open/closed.

The walk and talk on most GEC’s I’ve handled is pretty decent. My only gripe is that I don’t think that nail nicks are a viable method to open knives. My only interest in a nail nick is if it allows some portion of my finger to “stick” to the blade so I can pinch the knife open, and it barely functions as such on the #15. I’d love a more pinch-able blade.

GEC #15 Tidioute Boy’s Knife Review – Final Thoughts

All in all, my experiences with the GEC #15 have been very good. It’s a solid knife that performs well in the context that I think it was designed for. I think that most traditional knives perform pretty light duty tasks for everyone. Slice an apple here, open some mail there, maybe break down a few boxes as the need arises, but most of us won’t be carrying a GEC for a survival knife except perhaps as a tertiary backup to other gear. GEC’s have also maintained a good collector base, so if you’re the “Gotta Catch’em All,” type you will do well in this world.

If you are looking for a small and simple GEC slip joint, the #15 Boy’s Knife is well worth considering.

GEC #15 Boys Knife
From: BladeHQ

Editor: I recommend purchasing the GEC #15 Boys Knife at BladeHQ, KnivesShipFree, or GP Knives. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

TRC Knives K-1 Review

by Andrew Gene Leave a Comment

The K-1 is from TRC Knives, a company out of Lithuania. It is run by Andrius Tricius who is also the maker. I’ve had the pleasure of reviewing another one of Andrius’ knives, the Apocalypse-L which has helped to give me a little more insight into his work.

Buy the TRC Knives K-1 at BladeHQ

Buy on Amazon

As with the Apocalypse, this knife leaves an immediate impression of quality. There aren’t any rough surfaces or inconsistencies in the symmetry from side to side. The sheath is cleanly made without damage or marks from thermo-forming and all of the surfaces are well finished, edges chamfered and holes carefully countersunk. From first glance the knife seems to have been CNC made by a high end manufacturer. On closer inspection it is much nicer with the subtle attention to details only a highly skilled craftsman will ensure are tightly buttoned up.

General Dimensions and Blade Details

The TRC K-1 has an overall length of 9.25″ (235 mm), a 4.52″ (115mm) blade, weighs 6.95 oz (197g) and 10.01 ounces (286g) with the sheath. This knife is made in Lithuania. The knife is best described as a camp knife or large fixed blade utility knife. With a 4.5″ blade, it isn’t going to work as a daily carry for most people.

The blade on the knife is made from Böhler Uddeholm’s Elmax. This steel falls into the category of powder metallurgy (P.M.) steels and offers exceptional performance. By performance I’m referring to its ability to take and maintain a keen edge and its corrosion resistance. As a P.M. steel it enjoys a healthy mix of some otherwise tricky to alloy materials (in high amounts) such as carbon, chromium and vanadium. The exact composition is as follows:

Carbon	Silicon	Manganese	Chromium	Molybdenum	Vanadium
1.7	0.8	0.3	18	1.0	3.0

There has been a bit of a buzz surrounding Elmax as being overrated. The heat treat is often speculated as being the culprit. Personally I’ve had a positive experience with this knife and Elmax in general. It is somewhat tougher to sharpen than what most people are used to and perhaps this is partly where Elmax looses some points. If you let your knives get very dull and aren’t an experienced sharpener than a lower hardness or less tough steel may be a better choice.

The blade profile is reminiscent of the classic Bob Loveless drop point. It has a good amount of straight working edge followed by some belly toward the end. The spine drops down to meet the tip (hence the name) creating a better point for penetrating cuts, adding to the versatility. The grind is a high flat that is sharpened with a secondary bevel.

The spine of the knife is “capped” meaning that it’s rounded. This detail resolves the shape nicely while making it more comfortable in use when bearing down on the back of the blade with your thumb or other hand. This K-1 has a satin finish but the model can also can be had in a stone-wash. The flats have a coarse texture that contrasts the smoothly finished bevels adding an attractive detail. At the plunge there is a deep choil for sharpening. TRC knives is etched on one side of the blade with K-1 on the other and Elmax on the handle spine.

Handle and Ergonomics

The handle is a full tang construction meaning that the supporting handle material travels out to the edges of the scales and is visible. The tang on the K1 actually protrudes a little further and is rounded off for comfort. Having this extra steel around the edges helps to both protect the scales and allow the pommel to be used as an impact tool.

The scales are thick Olive Micarta. Micarta uses organic materials like paper, linen or in this case Canvas as a reinforcement in a resin matrix. Unlike other similar materials such as G10 (also called FR4) or carbon fiber that use glass fibers, Micarta has a natural look and feel. On its outermost surface it also slightly absorbent. Even when wet, Micarta has excellent traction making it a solid choice for an all-weather grip. For fasteners the knife has flat topped bolts that require a three pronged driver. While the bolts give the knife a modernizing look and add to the design interest, you’ll need a special tool if you ever have to re-tighten them or want to take down the knife.

Ergonomically the K-1 checks all the boxes. The handle has a great thickness and as mentioned, the Micarta provides excellent traction. All of the corners have been skillfully chamfered preventing hot spots and supporting prolonged use. The blade has a short front guard followed by a finger groove to keep your hand firmly in place without worry of slipping onto the edge. The groove is complimented by some deep jimping on the spine for thumb placement that adds control and feedback.

At about 4.75” long the handle should fit most medium to large hands with or without gloves. Both the inner and outer edges gently curve and resulting in a natural grip. They terminate at a slightly flared pommel that helps to prevent slipping off the handle. There is a lanyard hole where you can add a wrist lanyard to further secure you to the handle.

Sheath

For carry the K-1 comes with a Kydex sheath. It has a two piece, sandwich construction with the halves being held by black eyelets. The eyelets are spaced for modular attachment points using fasteners like Tek-Loks or other M.O.L.L.E. type rigging. A nylon belt comes standard with the sheath and can be removed if desired. At the bottom there is a small drainage hole for aeration.

The retention is good while still allowing the knife to draw easily. Removing the K1 is helped along by a flared out corner at the mouth of the sheath. This allows you to quickly push it away with your thumb. Overall the sheath is well executed, uncomplicated and versatile.

TRC Knives K-1 Review – Final Thoughts

To sum it up, there isn’t anything I dislike about the TRC Knives K-1. It is an excellent fixed blade. I think that the overall dimensions and weight fit perfectly into my outdoor knife preferences. It has enough size and brawn to make it capable of handling some harder tasks but isn’t over-built.

If you are looking for a higher end, medium sized handmade fixed blade than this may just be it. If not, TRC makes other models on the larger and smaller end of the spectrum that I’m sure will be equally well made, function flawlessly and last a lifetime.

TRC Knives K-1s Fixed Blade Elmax Steel Knife, Black G10 Handle, Kydex Sheath EDC/Hunting/Bushcraft Knife

It is the compact version of our best selling model K-1.It feels great in the hand and features classic drop point blade profile.With its razor sharp edge, it is large enough to tackle any chore.
The spine is rounded with elegant jumping cut into it providing control and confident operation.
The scales are made of indestructible sandblasted G-10 to provide excellent traction.
Elmax steel 60-61 HRC (heat/cryo-treated) 3.7 mm/ 0.14 in thick Overall length: 215 mm/ 8.46 in Blade length from the tip to handle : 100 mm/ 3.93 in Handle: Black G-10, Comes with Kydex sheath, Weight: 145 g / 5.1 oz
Created by a legendary Lithuanian Master Knife Maker Andrius Tricius. Made in Europe.

Editor: I recommend purchasing the TRC Knives K-1 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Additional Specifications:

Overall Length 9.25″ (235 mm)
Weight 6.95 oz (197g)
Weight With Sheath 10.1 oz (286g)

Blade:

Length: 4.52″ (115mm)
Thickness: .189″ (4.8 mm)
Steel: ELMAX 59-60 HRC (heat/cryo-treated)
Satin blade or stone washed blade

Handle:

Green Canvas Micarta (also available in black)

Sheath:

Kydex with detachable belt loop

Made in Lithuania

Giant Mouse ACE Biblio Review

by Aaron Shapiro 6 Comments

Wandering the hallowed halls of BladeShow in Atlanta can be an overwhelming and even intimidating experience. Knives are (not literally) being thrown at you right and left and it’s difficult to remember what you’ve seen, what you wanted to see, and what you haven’t been able to find yet. Several things stuck out to me during my time in Atlanta and high amongst them was the Giant Mouse ACE Biblio.

Buy the Giant Mouse ACE Biblio at BladeHQ

For those of you who haven’t heard of the Giant Mouse brand before, it is a collaborative production brand between custom knife makers Jens Ansø and Jesper Voxnaes; with the mission to design the highest quality production knife possible at the most reasonable price point they can. Over the past couple of years, I have had the opportunity to handle several knives from GM, but this was the first model that they produced with an ambidextrous clip which I need as a lefty.

The ACE line from GM is an unlimited production run of knives whereas the pure Giant Mouse lines are limited in production to 400 pieces per model. Currently, GiantMouse is offering two different models under the ACE umbrella, the Biblio (reviewed here) and the newly released Nimbus.

But first, as always, some specs:

Blade: 2.75” (with a cutting edge around 2.5”)
OAL: 6.75”
Thickness: .585”
Blade Thickness: .119”
Steel: M390
Weight: 3.8oz
Lock: Liner Lock

(These are my personal measurements made with my calipers and my faithful ruler, manufacturer’s published numbers may vary.)

Blade

The Biblio’s blade can best be described as a nicely bellied Wharncliffe. The blade has an ascending angle from the handle and terminates at a nice fine point. A nice thing about this shape is that when the edge is flat on a surface, the handle is raised above, allowing you to utilize the full length of the cutting edge without your hand interfering.

GiantMouse opted for a full flat grind as well, making this a pretty great utility slicer equally at home in the kitchen or campsite (not that these two need be separate). It’s ground thin and sharpened well straight from the factory. One last detail, GiantMouse has chosen to crown the spine on the blade, as I’ve stated countless times before this is a GREAT way to class up a knife.

The steel choice of M390 comes as an expected choice—the GiantMouse Knives are made in Maniago Italy by, I assume, Lionsteel who uses M390 in a lot of their models (Editor: I think Viper makes it, but I could always be wrong). I personally love this steel, it’s elementally similar to 20CV but manifests a finer grain that becomes apparent once you start sharpening it. I’ve always big a huge fan of M390 and request it whenever possible in custom orders. It’s been a solid performer, is very stain/wear resistant, and holds an edge well.

Handle, Ergonomics, and Pocket Clip

GiantMouse has opted to offer two handle material options for the ACE Biblio, either black G10 (which is accompanied by a satin blade finish) or green micarta (which comes with a stonewashed blade) both of which offer a nice grip and texture. The lines of the handle really lend themselves to locking into the hand, however, I do find that the grip itself is a little on the shorter side, with my pinky falling off the end—this is fixed if I choke up on the knife and utilize the large choil on the blade.

The clip is a simple wire clip that has the option for either “handed” carry. This is a simple method, but effective and has worked fine for me.

In the pocket, the GM is a squish on the thicker side, but being a liner lock you can’t expect much different. The ACE Biblio is far from the worst offender in this category.

Deployment and Lockup

I’ve always thought that having two different deployment methods on a knife generally meant that one took priority over the other. The Biblio, for example, has both an opening hole and a flipper tab but the detent is tuned for the flipper making it relatively difficult to open via the hole. That being said, using the flipper the action is smooth and snappy as expected with bearings.

The Biblio features your typical liner lock situation here, with a small bevel on each side of the lock to allow ambidextrous unlocking. My example engages fully, is solid in all directions, and hasn’t required any adjustment.

Giant Mouse ACE Biblio Review – Final Thoughts

Generally speaking, I think the GiantMouse project as a whole is a great exploration in what happens when two prestigious custom knife makers explore the production side of the knife-world without simply licensing a design or offering a mid-tech. Giant Mouse is a sole entity that operates within the design language of both Anso and Vox.

While I think that limiting the production runs of the of the GiantMouse offerings seems like a play for extrinsic value, it is nice to see that they have adopted an unlimited production run of affordable options.

The Biblio seems like a great choice for anyone that’s a fan of these two specific knife makers, wants a high-value option, or is looking for something that’s a little outside the “canon of normal knife brands.” The ACE Biblio is available (in Black G10) from BladeHQ for $175, and if you think about that… You’re getting an M390 flipper, designed by two well-respected makers, made to the exacting standards of (again what I assume to be) Lionsteel, for less than $200. Pretty hard to beat that these days, in my opinion.

Giant Mouse ACE Biblio – From $175.00
From: BladeHQ

I recommend purchasing the Giant Mouse ACE Biblio at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.