• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

BladeReviews.com

Knife Reviews

Menu
  • Home
  • Reviews by Brand
    • Al Mar Knives
    • Benchmade Knives
    • Boker Knives
    • Buck Knives
    • Cold Steel Knives
    • Chris Reeve Knives
    • CRKT Knives
    • DPx Gear
    • Emerson Knives
    • ESEE Knives
    • Fällkniven Knives
    • Fantoni Knives
    • Gerber Knives
    • Great Eastern Cutlery
    • Hinderer Knives
    • Hogue Knives
    • Ka-Bar Knives
    • Kershaw Knives
    • Kizer Knives
    • LionSteel Knives
    • Mcusta Knives
    • Mora Knives of Sweden
    • Microtech Knives
    • Ontario Knives
    • Opinel Knives
    • Reate Knives
    • Rockstead Knives
    • Schrade Knives
    • Shirogorov Knives
    • Smith & Wesson Knives
    • SOG Knives
    • Spartan Blades
    • Spyderco Knives
    • Steel Will Knives
    • Strider Knives
    • Victorinox Knives
    • Viper Knives
    • Zero Tolerance Knives
    • Close
  • Reviews by Purpose
    • EDC Knife Reviews
    • Tactical Knife Reviews
    • Survival Knife Reviews
    • Hard Use Folding Knives
    • High End Pocket Knives
    • Gentleman’s Folders
    • Rescue Knives
    • Traditional Knives
    • USA Made EDC Knives
    • Close
  • Reviews by Class
    • Folding Knives
    • Fixed Blade Knives
    • Assisted Opening Knives
    • Automatic Knives
    • Machetes
    • Titanium Frame Lock Knives
    • Close
  • Best Of
    • The Best EDC Knives
    • Best Survival Knives
    • Best Tactical Knives
    • Best High Value Knives
    • Close
  • Gear Reviews
    • Flashlight Reviews
    • Multi-Tool Reviews
    • Watch Reviews
    • Knife Sharpener Reviews
    • Close
  • FAQs
    • Knife Care and Maintenance
    • Knife Dictionary
    • Knife Steels
    • Steel Composition
    • Interviews
    • Close
  • Contact
  • About
    • About
    • Privacy
    • Links
    • Close

Made in Japan

Silky Pocketboy Saw Review

by Dan Jackson 7 Comments

I bought the Silky Pocketboy because I was looking for a small compact saw to take with me on suburban bicycle rides. It’s an odd use case, but that’s how I came to acquire my Pocketboy. Allow me to explain.

Silky Pocketboy Review

Long bicycle rides were a habit I formed when I was going to school in New Orleans. Usually the rides were a hangover cure of sorts. I’d drink into the early hours, and then wake up at the crack of noon to “sweat out the sin” in the Louisiana heat. It didn’t hurt that New Orleans is an infinitely interesting place, and the bicycle was the perfect means to explore it.

These days I’m in Sarasota, a boring town by comparison. Sure you have the natural beauty of the Gulf of Mexico, Sarasota Bay, and the glittering abundance of a thousand designer condos, but it’s a relatively sleepy town. I sometimes wonder what life would have been like if I had stayed in New Orleans after graduating rather than retreating to the relative comfort and safety of my parent’s place in Florida. Perhaps I could have gone to law school in Louisiana, and spent a life navigating the legal backwaters of the Big Easy. Or maybe I would have ditched law entirely and become a banana merchant or a tugboat captain. Regardless, I’m sure there would have been some good stories, and a lifetime of great bike rides.

So why the folding saw? Well, Sarasota isn’t the most bicycle friendly of places. Ironically I think New Orleans is a much safer city to ride in due to the variety of quiet back streets. The south part of Sarasota is largely defined by a waterway: the Phillippi Creek. The creek cuts through the neighborhoods, and as a result there are only a limited number of bridges you can cross to get downtown safely by bike. Sure, if you have abandoned all hope you can bike down the 6 lane Tamiami Trail. For a bicycle rider, the Trail is a modern day thunderdome lined with an endless succession of strip malls, chain restaurants, and assisted living facilities. It’s tantamount to a death sentence. As a result I take tree-lined paths and some quiet streets to get around town.

Silky Pocketboy

And some of those paths are overgrown. Plants grow like crazy down here and if left to their own devices they will quickly overtake the sidewalks and bike lanes. After suffering the indignity of getting whacked in the head by a palm frond for the thousandth time, I came to the realization that I could do something about this. In a world that seems completely out of control, I could contour the low lying branches that line my bike ride and prevent getting bushwacked. All I needed was a lightweight and compact folding saw. Could that really be the cure to my existential angst?

A good 10 minutes of research landed me on the Silky Pocketboy. Japanese steel, a lightweight handle, and a convenient carrying case. All for around $40. Bingo, bango, bongo!

General Dimensions and Blade Details

The Silky Pocketboy has an overall length of 11.5″, a 5″ blade, and weighs 6.2 ounces without it’s plastic sheath. 7.8 ounces if you include the sheath. It’s made in Japan. A saw like this is designed to be taken with you. Obviously I’ve taken mine around on my bike, and it fits perfectly in a small pouch I have under the seat, but have also thrown it in my briefcase and used it to trim some palms at my office. It’s small enough where you could keep it in a car or portable tool kit. Of course it’s also highly effective around the yard but Silky makes other saws that might be better suited to live in your garage.

Silky Pocketboy vs. the Spyderco Endura and Delica

The blade is made of SK-4 high carbon tool steel made by Hitachi. Knife guys may have heard of SK-4, it’s a robust tool steel. The blade i s taper ground, meaning it’s thicker at the teeth and thins out towards the spine. That is the opposite of what we see with knives, but it makes sense for a wood saw to avoid binding. SK-4 is not a stainless steel, so I have tried to spray my saw down with WD-40 after each use. However, I forgot to do that the last time I put it away. It was caked with tree sap and wood shavings. But no rust!

The blade is also deferentially hardened. Technically, it’s impulse hardened, which a special process for saw blades where they instantly heat the teeth of the blade and harden them. The rest of the blade is not hardened to this extreme, which allows it to be flexible. The possible downside is that impulse hardened teeth can not be sharpened, at least they aren’t designed to be sharpened. That likely won’t be a problem if you are careful with your saw – it should cut wood and other soft materials for years. But if you happen to hit a rock or the side of a bridge like I may have, then you are kind of screwed. So be careful with your saw. I’d hate to see anyone else get screwed.

Silky Pocketboy Blade

There are 7 teeth per inch, the blade is 1.1mm thick, and the kerf is 1.2 mm. None of these specifications mean a whole lot to me, but they may have significance to you so included them for completeness.

In practice this little saw has been impressive. In most cases I can cut through branches 1 inch thick or less with one or two strokes. I’ve cut through 3-4″ branches relatively easily. I’m talking well under 30 seconds. It’s painful for me to write this, but if you have a 3-4″ diameter limb, then it’s far easier to use this saw than using a big knife or hatchet to chop through it. Not to mention safer. This is coming from a guy who loves big knives.

Silky Pocketboy Spine

I also used this saw on some old lumber. I found it to be more of a chore to chew through a 2×4 with this compact saw. I doubt anyone is buying it for that reason, but this saw’s sweet spot strikes me as green wood 4″ in diameter or less. It rips through stuff like that. Pressure treated limber and big timber are best left for larger saws.

This is as good a time as any to disclaim that I won’t pretend to be a connoisseur of saws. I’m not. This is essentially a lay person’s review. If you are a normal person looking to up your portable saw game, then I think the performance of the Pocketboy is going to be impressive.

Also, I’ve used my Pocketboy for a couple months now, but I bought it for long term use. If anything changes I’ll update the review.

Handle, Ergonomics, and Sheath

The handle of the Pocketboy is made of chrome plated steel with a rubber overmold. According to Silky’s literature, the rubber may be vulcanized to the handle. So far the rubber has not peeled away from the steel. Construction is simple and sturdy. The fit and finish is good. It’s not as fancy as a high end knife, but all the parts line up, and everything is finished neatly. There is a large slotted pivot and a good size lanyard hole as well.

Silky Pocketboy Handle

The ergonomics of this saw are great. The handle is generously sized, and the rubber overmold is comfortable. It provides excellent grip, plenty of cushion, and it’s big enough for all hand sizes. I’ve yet to have this saw slip out of my hand, and I’ve used it in the Florida summer. No hot spots or anything like that. The one thing to be careful about is the lock . If you are a maniac like me, then you may accidentally disengage it whilst sawing. There is little risk of the blade closing on your hand, but the blade could slide back to it’s second position.

Silky Pocketboy Ergonomics

Silky sends their saw in a clear plastic sheath. It’s more of a bubble. I like to think of it as a crystal case enclosing the delicate flower that is the Silky Pocketboy. Not really. It’s hard plastic, and the fact that it’s clear is not a bad thing. It has a drain hole and a large clasp. The saw fits in snugly thanks to the rubber handle. There is also a large metal belt loop. I’ve used it, and it is very convenient. Perfect for places where you can open carry a folding saw.

Silky Pocketboy Lock

I bought the Pocketboy specifically for it’s portability, and in that respect it does not disappoint. True to its name, this saw could fit in your pocket.

Deployment, Lock, and Case

It shouldn’t surprise anyone to learn that this tool requires 2 hands to open the blade. Opening up the saw is easy enough. There is a small nail nick of sorts in the blade, and there are washers inside the handle. The action is smooth and fluid rather than rough and scratchy.

Silky Pocketboy with the Sheath

There is a simple back lock to keep the blade locked in place. The blade locks with a loud and satisfying click, and there are 2 blade positions to choose from. The lock works well and there is zero blade play in any direction. As I mentioned the lock is easy to get to, so you should exercise care to not accidentally disengage it. I’ve done that on some especially long, hot, and vigorous sawing sessions, but I’ve never come in danger of having the saw close on my hand. Instead it seems to slip back to the back position.

Silky Pocketboy in the Clear Plastic Sheath

Here’s a final shot of the Pocketboy in it’s case:

Silky Pocketboy Sheath Tab

It gives you a feel for how the clasp works and the size of the closed saw in the case.

Silky Pocketboy Review – Final Thoughts

I’ve been impressed with the cutting capability of this saw. I can’t think of anything else that would fit underneath my bike seat that packs this much power. As much as I love big knives for chopping, a saw like this is going to be safer and more efficient most of the time. Maybe not as fun as blowing through a tree limb with an ESEE Junglas, but if you happen to be working on the side of the road the likelihood of Law Enforcement getting involved is much lower.

The Pocketboy pairs that impressive cutting power with a comfortable handle, a sturdy lock, and a practical carrying case. And the fit, finish, and general attention to detail on this tool is quite high. It’s clear that this was built with care and attention. Everything is snug, flush, and well finished. When you consider what $40 buys these days as far as pocket knives go, this little saw impresses.

Time for the real question: So has the Silky Pocketboy cured my existential dread? Yeah, I’d say it did something for me. There is a certain sense of accomplishment neatly trimming a a bush or tree. What was once in my way, is now gone. It’s like making your bed, or driving your car after you just washed it and for 5 minutes everything is perfect. Satisfying. The Pocketboy accomplished any roadside task I put it to with alacrity, and I always felt better after I used it. For that, I am thankful.

I like the Pocketboy and it’s staying in my bike bag for the long haul. Recommended for people who need a small high-performance folding saw to cut through whatever is in your way.

Editor: I recommend purchasing the Silky PocketBoy at Amazon. Thank you for reading.

Filed Under: Misc. Gear Tagged With: Made in Japan, SK-4

Spyderco Moran Drop Point Review

by Travis Pike 3 Comments

I’m always amazed by what I don’t know. For example, before I got my hands on this Bill Moran and Spyderco collaboration, I never knew who Bill Moran was. That sounds like sacrilege on a knife website, but I’m being honest. This isn’t an article on the greatness of Bill Moran, but he makes some beautiful knives that go for a small fortune. He helped found the American Bladesmith Society, and has been making knives for decades. The Bill Moran and Spyderco collaboration seems to blend the simple but effective Moran designs with an affordable price tag.

Spyderco Moran Drop Point Review
Buy the ESEE-6 at BladeHQ
Buy on Amazon

The Moran Drop Point knife is mass-produced, unlike Mr. Moran’s knives, and are made for heavy-duty use and not so much for collecting. This isn’t a wall hanger but a reliable and well-made working knife. I’ve had it most of hunting season, but sadly I’ve been an unsuccessful hunter. In the many months, I’ve been carrying it, and I’ve gotten a good bit of use out of it.

General Dimensions and Blade Details

Bill Moran’s designs are mostly known for their simple and elegant designs, and the Spyderco collaboration is no different. The blade is 3.875 inches long with an edge length of 3.375 inches. The blade is a standard .125 inches thick. The knife has a ¾ tang and the handle is molded directly to it. If you can’t tell by the knife’s name, it is a drop point design.

Spyderco Moran Drop Point

The stainless blade is quite shiny, but also very rust-resistant. The handle is made from FRN, and the overall length of the knife is 8.063 inches. It’s also one of the lightest fixed blade knives I’ve ever picked up. It weighs 3 ounces. 3 freaking ounces, holy crap is this thing light. I loved strapping it to my belt and never worrying about causing my pants slowly slide downwards on one side. I didn’t have to tighten my belt to an uncomfortable level to easily carry this knife.

From Spyderco, this knife was razor sharp. I always love it when companies send their knives out with a sweet edge, but get sad because I can’t replicate it. The Moran Drop Point is made from VG 10 steel, which is a very common kitchen knife steel. The main reason why is that it’s super resistant to corrosion. It’s stainless steel, but a solid and tough one. It’s perfectly suitable as a woods knife or a lightweight EDC blade for those working in more outdoor professions.

VG-10 proved to be a little challenging to sharpen for me, but to be fair, I suck at sharpening knives. Once you get it sharp, it stays sharp for quite some time. I only sharpened it, so I would have some perspective on sharpening it for this review. It’s also an ultra-sharp knife, and with a fine stone, you can get it very sharp.

Spyderco Moran Drop Point Handle

I’ve used this knife for filleting trout, cutting chicken up for my famous chicken tacos, and doing typical knife work cutting tape, cordage, wire, boxes, and more. When it came to cutting up fish and chicken, I found the knife to be a delight. For the precise cuts required for cleaning trout, the knife was perfect. FOr cutting 4 pounds of chicken breasts into small chunks, it was a comfortable tool that made the task easy.

The same goes for your routine tasks. Admittedly when Christmas came and went, this knife got a lot of work. Why are toys so well secured in boxes? Holy crap, the number of cords, zip ties, and cardboard I had to cut before the day was over. The Moran powered through it with ease, though.

Handle and Ergonomics

What’s impressive is that the handle and the knife as a whole weigh about the same. This creates a super balanced knife that’s easy to control. The handle is made from fiberglass-reinforced nylon or FRN. This is a robust and lightweight material that provides a bit of grip to it. Spyderco is a master with FRN and uses it in some of their folding knives.

Spyderco Moran Drop Point Handle

The FRN grips have non-removable Kraton panels. These are ultra-sticky panels that allow for a sure grip when working. Unlike most knives these days, there is no aggressive texturing. The combination of FRN and Kraton is enough to give you a no-slip grip under most conditions. I can testify that the grip is still strong even when your hands are wet and covered in fish slime.

Spyderco Moran Drop Point in the Hand

Besides giving a sure grip, it’s also very comfortable. Aggressive texturing is excellent, but it tends to create hotspots. You’ll find no of those here. The grip is rounded off and ultra-comfortable in hand. The handle gives you excellent control of the blade and allows you to make fine cuts with little difficulty.

Sheath

The sheath is a lightweight boltaron model that comes with a multi-purpose G-Clip fastening system. The sheath’s G-Clip system is a polymer belt attachment with a sharp hook that connects under the belt to keep the knife in place. The system is reversible for lefties, and you can move the clip around quite a bit.

Spyderco Moran Drop Point G Clip

The angle of wear can be moved around for your comfort, and this includes wearing the knife horizontally if you so choose. The sheath comes up right over the blade and the knife locks in positively. It’s a good solid hold, and the knife stays put without the need for an active retention device.

Spyderco Moran Drop Point Sheath

The handle is also left with enough room for a good grip and an easy draw. The belt clip does its job well and hangs onto the belt without a hair of movement as the knife is drawn. The sheath is quite robust but keeps the theme of being lightweight, which keeps the entire knife system lightweight.

Spyderco Moran Drop Point Range Day

Spyderco Moran Drop Point Review – Final Thoughts

While the name Moran might not have meant anything to me before owning this knife, I can certainly see why Mr. Moran was such a popular bladesmith. This simple knife is far from tactical or high speed, but entirely practical. The ultra-lightweight and well-balanced design makes it an excellent tool. It’s one you can strap on and forget about, but when you need it, it’s there and razor-sharp. Plus, this is the only Moran knife I’ll ever be able to afford.

ESEE Knives 6P Fixed Blade Knife w/ Molded Polymer Sheath
ESEE Knives 6P Fixed Blade Knife w/ Molded Polymer Sheath
Buy on Amazon

Editor: I recommend buying the Spyderco Moran Drop Point at BladeHQ or Amazon. Thank you for reading.

Filed Under: Camp Knives, Spyderco, Survival Knives Tagged With: Bill Moran, Made in Japan, VG-10

Spyderco Atlantic Salt Review

by Dan Jackson 3 Comments

This review is a series of firsts. After over 400 reviews, this is the first time we have reviewed a knife with a fully serrated blade. It’s also the first time we have reviewed a knife with H1, an uber stainless blade steel. At first glance, that may hold some significance. But really, this is a purpose built knife. The Spyderco Atlantic Salt is designed for marine use. This is a mariner’s knife.

Spyderco Atlantic Salt Review
Buy the Spyderco Atlantic Salt at BladeHQ

Buy on Amazon

Actually, according to Spyderco this is a rescue knife adapted for marine use. They took their Spyderco Rescue, and outfitted it with a high visibility handle and rust proof H1 steel. It’s a purpose built tool and probably not something most people are going to consider for their Every Day Carry (EDC) knife.

Spyderco Atlantic Salt

I have wanted to check out a knife in H1 for a while. According to Spyderco this is a completely rust proof steel. That’s different from a “stainless” steel, as even stainless steel can and will rust. Stainless steel will simply “stain less” than a non-stainless steel.

And as most steel enthusiasts know, blade steel is an exercise in compromise. Improving one quality of a knife’s blade steel, like hardness, often comes at the expense of something else, like toughness, ease of sharpening, or stain resistance. So what will be the compromise with H1? Will it cut like a butter knife and be impossible to sharpen? Let’s find out.

General Dimensions and Blade Details

The Atlantic Salt has an overall length of 8.25″, a 3.678″ blade, weighs 2.75 ounces, and is made in Japan. This is a pretty large folding knife, but it doesn’t feel overly big thanks to the unusual blade shape, high visibility handle, and ultra-light construction. EDC knives this big typically give off a tactical or “weapon” vibe, but this Atlantic Salt reads more like a tool and doesn’t strike me as being particularly threatening.

For these reasons I’ve actually carried the Atlantic Salt quite a bit. I don’t own a boat, and while I live in South Florida, I don’t get on to the water as much as I would like. So at the time of writing this review I can’t say I’ve used it as a mariner’s knife. But I have carried it and used it, and plan on keeping the knife for long term testing. It will join me on fishing trips and the occasional boat ride.

Here is the Atlantic Salt next to my Delica and Endura. As you can see, it’s only a little shorter than the Endura.

Spyderco Atlantic Salt vs. Spyderco Endura and Spyderco Delica

The blade is purpose built, and will take some getting used to if you are a fan of drop points. It’s a hollow ground wharncliffe with a fully serrated edge after all. Of course this was done for a reason. It’s a wharncliffe to reduce the risk of stabbing yourself on the pitching deck of a boat. It’s serrated to cut through line, and possibly clothing, and to take advantage of H1’s unique properties. It’s hollow ground because some believe H1 is “work hardened” rather than heat treated. What that means, is that as the blade is ground and the metal is removed blade steel hardens due to the force on the steel rather than a heat treat. This phenomenon is also referred to as “plastic deformation”. So they need to grind both sides simultaneously to avoid warping the blade, and they can do that with a hollow grind. Each aspect of the Atlantic Salt’s blade was done for a reason.

And lets turn to H1 itself. H1 is a high chromium austenic steel. The term “austenic” has to do with the crystal microstructure of the steel. I won’t get into a chemistry lesson, but if you want a deep dive on H1 I recommend this article by Knife Steel Nerds. You will learn all you want to know about H1 in that article.

Spyderco Atlantic Salt Blade

The takeaway is that H1 is structurally different from the typical ferric stainless steels you find in most knife blades. It’s hallmarked by being completely stain proof, but the sacrifice is hardness. Bro science and anecdotal evidence suggest that a serrated blade best takes advantage of H1, and provides better edge retention. But modern metallurgy doesn’t explain why that would work scientifically. The Knife Steel Nerd even says that grinding a blade shouldn’t be enough to work harden it, and he’s the Knife Steel Nerd. So who’s to say?

All I can really do is test this stuff out, so that’s what I did. The knife came surprisingly sharp out of the box. It cut paper cleanly and easily. It tore through cardboard. I bought this knife on Black Friday, so it survived the holiday season with me. Lots of boxes lay broken in the wake of the Atlantic Salt. The serrated edge is surprisingly effective. I got a lot of work done with the knife before needing to sharpen it.

In fact, the knife was still tearing through things effectively, but I decided to pull out my Spyderco Golden Stone anyways to see what a sharpening session would do for the H1 blade. I used the rounded corner of the Golden Stone and zipped the serrated edges along the edge of the stone. Spyderco recommends sharpening both sides of a serrated blade, and that’s what I did here. The results were great. The knife got extremely sharp quickly. The Atlantic Salt slipped through cardboard as if it were butter. This is an easy knife to sharpen if you have a rounded stone for the serrated edge. I happened to use my mythical Golden Stone, but the Sharpmaker works beautifully for a knife like this.

Here is another size comparison. This time I have the Atlantic Salt next to my Para 2 and Tenacious:

Spyderco Atlantic Salt vs. Spyderco Para 2 and Tenacious

The blade steel also exhibits excellent toughness. I didn’t test this in any particular manner, but noticed that the steel is so tough that it scratches easily. I noticed this immediately after cutting cardboard, and this YouTube video shows the wear on an H1 blade after 5 years. I think it’s interesting how the person who made that video compared the wear pattern on the H1 blade more to titanium than stainless steel. I would agree. My other blades don’t wear like this.

All said, I was surprised with the utility of the H1 blade. Now I know H1 to sharpens easily, keeps a decent edge, and has the benefit of being completely rust proof. The serrations may be important. I need to buy another knife with a plain edge in H1 to test it out.

Handle, Ergonomics, and Pocket Clips

In contrast to the unique and alien blade, the handle of the Atlantic Salt is familiar territory. Anyone who has handled a Spyderco Delica or Endura will immediately recognize the construction and materials of the Atlantic’s handle. That said, there are still plenty of things to note here.

Spyderco Atlantic Salt Handle

First of all, the handle is a shock of bright yellow. That’s great for marine use and work knives in general. It’s possible you could drop this knife in shallow water and still locate it. Certainly it would stand out on the forest floor. The handle design is also completely devoid of metal liners. Instead, it’s 100% injection molded FRN (Fiberglass Reinforced Nylon). It still feels sturdy without the liners, but I wouldn’t consider the Atlantic Salt to be a hard use knife.

Continuing with the Mariner’s knife theme is the inclusion of a shackle key. That’s the elongated teardrop shaped hole in the handle. This is used to tighten screw pin shackles that you find mostly on sail boats. The Glessers were sailors, presumably before they settled in landlocked Colorado, so they are especially sensitive to the needs of a mariner.

Spyderco Atlantic Salt Egonomics

It shouldn’t come as a big surprise that the Atlantic Salt is comfortable in hand. The handle is generous, easily accommodating large hands, and balances high traction with comfort. There is contouring all around the handle feeding into the heavily textured flats. There is good jimping on both the forward “50/50” finger choil (meaning 50% of the choil is handle, 50% is blade), and the severely angled thumb ramp. Your fingers are unlikely to slip forward towards the edge, even if your hands are wet. The balance point of the knife is right behind the pivot, lending the knife a slightly blade heavy feel unless you use the forward choil. All said the handle is well considered and exceedingly comfortable.

Even the pocket clip of the Atlantic salt is different. Here it’s a spring clip made of powder coated titanium. That’s another first for the blog. It sits high on the handle in a tip up configuration, and can swapped to the right or left side. The screw that holds the clip in place is slotted and drilled through so you can run a thin lanyard through it. It’s an elegant approach to the typical awkwardly placed lanyard hole, and one I wouldn’t mind seeing in other designs.

Spyderco Atlantic Salt Pocket Clip

In pocket the Atlantic Salt carries pretty well. It’s a lightweight knife, so that’s nice. It’s also relatively thin; about the thickness of a Delica. Where the Atlantic Salt falls a little short, is that it’s a very wide knife. That’s due to the unusual design. I definitely feel this knife in the pocket. That’s not the end of the world, but worth noting. There is some bulk associated with the Atlantic Salt.

The clip is secure and has excellent retention. While the knife rides low in the pocket, that canary yellow handle is tough to ignore. Here is your in the pocket shot:

Spyderco Atlantic Salt in the Pocket

Deployment and Lockup

The blade is opened by the prominent thumb hole. It is oversized and easy to access. I tend to take that granted on a Spyderco, but what caught me by surprise was how smooth the action is on this knife. It’s buttery smooth. I can’t tell by peering down into the handle, but this may be a washerless design. I don’t know, but whatever is going on works, so I’m hesitant to take the knife apart. Once you overcome that initial spring tension the blade opens easily and locks with a satisfying click.

Spyderco Atlantic Salt Lock Back

Speaking of locks, the Atlantic makes use of a lockback. It’s secure, and my knife is free of blade play in any direction, but this is not a knife I’d use for serious woodwork or other hard use tasks. Sure, it can cut into a board, but where the Atlantic salt truly excels is in sawing through fibrous materials and cardboard. But the linerless design doesn’t inspire confidence with truly tough tasks, and I’d be careful not to test the limits of the design. That said the lockback performs flawlessly. It is secure when open, and disengages easily with the push of a thumb.

Blade centering is perfect on my knife.

Spyderco Atlantic Salt Review – Final Thoughts

As a collector, I find the Atlantic Salt to be a quirky and charming knife. It’s different. That’s for sure. As a purpose built tool I think it’s a success. Granted I have yet to take this one on a boat, but I grew up on boats so I have some understanding of the application. And I live a quarter mile from the Gulf of Mexico so I’m around salt water regularly. The Atlantic Salt is well considered and a practical marine work knife.

What surprised me was how much I enjoyed the Atlantic Salt as an EDC. It kept finding it’s way back into my pocket. It’s wide, which is it’s biggest downfall in my book as a daily carry piece, but it’s lightweight and carryable. The H1 steel is actually a pretty decent blade steel. It’s nothing like M390 or a super steel in terms of edge retention, but I got a lot of work done with the serrated edge, and the knife sharpened quickly and easily. I was expecting a bigger compromise from a completely rust proof steel.

In the end, I’d buy another knife with a H1 blade. I’d like to try out a plain edge, just to get a better feel for how well the steel holds its edge.

For now, the Atlantic Salt will remain in my permanent collection. It’s unique, well considered, and fully functional. I’d recommend it if you need a rust proof knife, or are simply curious about it like I was.

Sale
Spyderco Atlantic Salt Lightweight Folding Utility Pocket Knife with 3.68' Corrosion Resistant H-1 Sheepfoot Blade and Durable Hi-Viz Yellow FRN Handle - SpyderEdge - C89SYL
Spyderco Atlantic Salt Lightweight Folding Utility Pocket Knife with 3.68" Corrosion Resistant H-1 Sheepfoot Blade and Durable Hi-Viz Yellow FRN Handle - SpyderEdge - C89SYL
  • Superior Quality - It is made from H1-Steel which is a precipitation-hardened steel containing nitrogen instead of carbon, which cannot rust.
  • FRN Handle - It is textured with a Volcano Grip pattern, the molded fiberglass reinforced nylon (FRN) handle is visible marine yellow, equipped with a reversible titanium pocket clip for right or left- handed use.
  • Game Changer - The serrated hollow-ground blade offers remarkable cutting performance in and around fresh and saltwater.
  • Corrosion Resistant - The knife is completely ambidextrous and utterly impervious to corrosion.
  • SPECIFICATION - It has a overall length of 8.25", blade length of 3.6" and a weight of 2.75 oz. This knife is made from Japan.
$111.50
Buy on Amazon

Editor: I recommend buying the Spyderco Atlantic Salt at BladeHQ or Amazon. Thank you for reading.

Filed Under: Folding Knives, Rescue Knives, Spyderco Tagged With: H1, lockback, Made in Japan, serrations, wharncliffe

Spyderco Centofante 3 Review

by Seth Vietti 1 Comment

The Centofante 3 is one of Spyderco’s most long-lived designs. Introduced in 2004 and unchanged to this day, it’s been around long enough to witness most of the rest of Spyderco’s lineup either evolve or go extinct. I think the reason why is simple: the Centofante still looks good.

Spyderco Centofante 3 Review
Buy the Spyderco Centofante 3 at BladeHQ

Buy on Amazon

Even a diehard Spyderco fan will admit that the company’s design language can be… polarizing. The Centofante achieves broader appeal by standing apart from the typical Spyderco style: no bulging blade, no forward finger choil, no full-flat grind. It’s slim, simple, yet dramatic. If not for the round hole and the silver bug in the handle, it could easily pass as a knife from another brand.

I’ve long been tempted to pick one up for myself, but skepticism of its old-fashioned pinned construction always held me back. Until now. So, is the Spyderco Centofante 3 really as timeless as it looks?

General Dimensions & Blade Details

The blade on the Centofante is just shy of three and a quarter inches long. Thanks to a tiny ricasso and the absence of a finger choil, it has almost the same amount of usable edge as the significantly larger Paramilitary 2.

Spyderco Centofante 3 Blade Comparison with Paramilitary 2

Despite all the edge, the blade still feels petite – no doubt due to its exceptionally thin blade stock. It’s the Centofante’s most noteworthy spec: at 1.95mm thick (according to my calipers), it’s easily the longest, thinnest folding blade in Spyderco’s entire catalog, if not the knife market at large. The only knives I own with thinner blades are either keychain-sized novelties or flexible kitchen knives. The Centofante makes the Delica’s blade stock look generous in comparison, and the Para 3’s, outrageous.

Spyderco Centofante 3 Blade Thickness

A hollow grind was definitely the right choice here. As much as I appreciate Spyderco’s full-flat grinds, they necessarily get quite thin towards the tip. The steady hollow grind on the Centofante has no such distal taper, preventing this sliver of a blade from being drawn too thin. There’s no flex, and the tip is narrow but not delicate. While I would never recommend prying with it, the blade seems better equipped for the task than, say, a full-flat ground Delica, since it’s supported by full thickness blade stock almost all the way to the tip.

My Centofante didn’t arrive as sticky sharp as I have come to expect from Seki City, Japan Spydercos. Thankfully, the neatly applied factory edge and sharpening choil made it easy enough to touch up. As you might expect with a knife this thin, it cuts quite well. It doesn’t have the shearing power of a broad, flat ground blade, but it’s much more agile – able to twist quickly mid-cut without much resistance. Whether it’s a drop point or a spearpoint, the blade shape just works: a stretch of flat edge, a gentle belly, and a focused tip.

Spyderco Centofante 3 Blade

The blade steel is VG-10, a time-tested alloy with excellent corrosion resistance and decent edge retention. While today’s best powder metallurgy concoctions outclass it in one way or another, I don’t really miss them here. The more knives I use, the more I appreciate well-balanced steels; especially ones that deliver good value like VG-10. Also, on a knife that can’t be taken apart for cleaning, VG-10’s stainlessness is a major asset.

Handle, Ergonomics, & Pocket Clip

At a glance, the handle of the Centofante looks like anodized aluminum. If it was cool to the touch, it would feel like it, too. It’s actually plastic (fiberglass reinforced nylon, to be specific) with a similarly smooth, light texture. The silver bug and “speed lines” molded into the handle seemed a bit odd at first, but they grew on me: they give an otherwise plain knife some personality without being ostentatious.

Spyderco Centofante 3 Ergonomics

The Centofante is exceedingly comfortable in hand. The four and a half inch handle is lightweight, nimble, and well-sized for the blade. Its ergonomic features are subtle. No finger grooves or jutting guards, just gentle curves that suggest – not demand – how to hold it. I especially like how it bows down into the palm: it helps the skinny handle feel more substantial, and keeps the angle of the blade better aligned with the arm. If you’ve ever used a Spyderco Military, the Centofante will feel weirdly similar. Despite the size difference, the knives share the same sloping ergonomic geometry.

Spyderco Centofante 3

The pocket clip is highly functional, doubly so because the handles are smooth. It comes from the factory configured for tip-down carry. I’m no tip-up evangelist, but after carrying it tip-down for a few days it was obvious the factory got it wrong. The exposed tang, pointy thumb ramp, and aggressive jimping on the blade snag everything in their path. Front pocket, back pocket; didn’t matter – retrieving a tip-down Centofante from any pocket was awkward and unpleasant, as was reaching past it. Luckily, flipping the clip to tip-up instantly and entirely solved the problem.

Spyderco Centofante 3 Pocket Clip

The real snag with the Centofante – well, the one you can’t fix with a screwdriver – is the handle’s pinned construction. I understand why it’s a deal-breaker for some people, especially the tinkerers who like to modify their knives and those who need something 100% rust proof. Given the choice, I’d take threaded fasteners over pins myself.

Nevertheless, my experience with the Centofante was completely undiminished by the way it was put together. Honestly, I was fishing for a problem and still couldn’t find one. We knife nerds can get swept up in hypotheticals. What if the pivot comes loose? What happens if the knife gets filled with sand? In reality, most of the projected problems with pinned construction have simple solutions – just not the same ones as a knife held together with screws. The pivot came perfectly set from the factory, and, being incapable of twisting itself loose, it has stayed that way. When I got sharpening stone slurry all over the knife, I cleaned it with soap and hot water, followed by a squirt of penetrating oil. Basically, I used the Centofante with impunity and it’s only gotten better. So, why worry?

Deployment & Lockup

A back lock secures the Centofante open. Like many old-school back locks, there’s a touch of vertical flex in the lockup – not enough to hear or see, just enough to feel when bearing down into a cut. Spyderco’s newer back locks have stamped out this endemic blade play with tight manufacturing tolerances and refinements to lock geometry. It would be nice to see those improvements carried over to older designs like the Centofante, but since it doesn’t affect the lock’s strength or security, I didn’t let it bother me.

Spyderco Centofante 3 Lock Back

The blade has a springy self-close, and once broken in it was easy to thumb or spydie-flick open. There’s enough ricasso to allow for one-handed closing, so long as you’re mindful of where your fingers are on the handle.

Spyderco Centofante 3 Review – Final Thoughts

This is a chimera of a knife. It’s almost as if it was built to satisfy a bunch of contradictory design objectives all at the same time. A strong grind on a delicate blade. An upper class look for a middle class price. Traditional construction on a modern folder. Somehow, the Centofante manages to hit those opposing targets simultaneously instead of splitting the difference and missing them altogether – if the late Frank Centofante was a bowler instead of a knifemaker, the Spyderco Centofante would be a 7-10 split conversion.

Spyderco Centofante 3 in a Tree

Ironically, the contradictions that make the Centofante unappealing to knife enthusiasts are probably the exact reasons for the Centofante’s long-term success. It’s not a niche knife. It’s a classy, charming, low-maintenance workhorse of a blade that belies its price point. For me, that makes the Spyderco Centofante 3 the consummate gift knife: handsome enough to appeal to anyone, and uncomplicated enough to work for someone who’s never even heard of a “torx bit.” No instructions necessary, no setup required (well, maybe you should go ahead and flip the pocket clip before wrapping it up). Give one to someone who appreciates nice things but knows nothing about knives, or someone who appreciates knives but knows nothing about nice things.

Spyderco CENTOFANTE 3 Prestige Folding Utility Pocket Knife with 3.14' VG-10 Stainless Steel Hollow Ground Blade and Lightweight FRN Handle - PlainEdge - C66PBK3
Spyderco CENTOFANTE 3 Prestige Folding Utility Pocket Knife with 3.14" VG-10 Stainless Steel Hollow Ground Blade and Lightweight FRN Handle - PlainEdge - C66PBK3
  • One of a Kind -Designed in collaboration with Frank Centofante, longtime custom knifemaker and past President of the Knifemaker's Guild, the Centofante 3 captures the spirit of his custom designs.
  • Ultra-Lightweight - The Centofante 3 has a thin-profiled, lightweight FRN Handle. Two channels are furrowed out of the handle for better grip and a Palladium silver Spyderco bug is inlayed into its surface.
  • Easy-to-Use Lock - For added security and convenience the back-lock is positioned midway on the spine and David Boye Dent is cut from the locking lever.
  • Pocket-Friendly - To ensure discreet carry the Centrofante 3 has a black steel pocket clip positions for tip-up/down, right-hand carry.
  • Versatile - The VG-10 blade has both a hollow-grind and swedge-grind with non-sharpened spine serrations (jimping) to hold the thumb steady when cutting.
$88.20
Buy on Amazon

I recommend purchasing the Spyderco Centofante 3 at Amazon or BladeHQ. Thanks for checking out my review.

Filed Under: EDC Knives, Folding Knives, Spyderco Tagged With: Frank Centofante, lockback, Made in Japan, VG-10

Rockstead Higo Review

by Dan Jackson 9 Comments

Today I’ll be reviewing an expensive knife. There is no way around it. The Rockstead Higo retails for the better part of $1000. It’s insanely expensive, and it’s taken me the better part of 10 years of writing about knives to work my way up to purchasing one. I’ve considered it before, but always had something else I’d rather spend $800 on. Like food, rent, and child support. But recently I got my priorities straightened out and purchased a Rockstead for review.

Rockstead Higo Review
Buy the Rockstead Higo at BladeHQ

So it may come as a surprise to hear that the Higo is actually one of Rockstead’s least expensive offerings. You can easily spend $1,500 to $3,000 on one of their knives.

The Higo is one of their simpler, more utilitarian models. Relatively simple duraluminum handles and a single stand off house a beautiful, smoky black DLC coated blade. And it’s not just any blade, it’s Rockstead’s beautiful “HONZUKURI” double convex blade shape brought to a flawless mirror polish. Yes, it’s high time we reviewed a Rockstead, and examined this knife in all of it’s expensive glory. By the way, I am writing this review from a cardboard box.

General Dimensions and Blade Details

The Higo has an overall length of 8.5″, a 3.5″ blade, weighs 3.6 ounces and is made in Japan. It’s a larger knife but could be EDCd if you like the idea of daily carrying an ultra high end pocket knife. I think it is one of Rockstead’s more staid models, but personally, I wouldn’t EDC this thing. Not only is it too expensive for me to use without feeling guilty, I have major reservations regarding how I would sharpen the knife. I’ll comment on that further below.

Rockstead Higo

The Higo comes with a long drop point blade. The tip on the knife is fairly high, and it provides a rather abrupt belly. The blade is saber ground, and there is a hole in the flat of the blade with a short milled fuller. I am not sure if that’s for decoration, or is part of the manufacturing process. I never think too hard about that because my eye is inevitably drawn to the beautiful mirror polished primary bevel.

As an aside, this polished blade is a bear to photograph. My photography has never been great, but I apologize for the especially schlocky photos accompanying this review. I did my best to keep my mug out of the photographs, but there are still all sorts of reflections in the shots showing the blade.

Rockstead’s process for finishing the blades this way is time consuming, and labor intensive. This is part of the reason why Rockstead knives are so expensive. Rockstead does a reasonable job explaining the process on their website. Apparently someone hand sands these blades starting at 400 grit going all the way up to 2000 grit. Then additional finishing work is done on the knife through some proprietary processes that are well beyond my pay grade as a lay person.

The net result is the most beautiful blade I have ever laid my eyes on. The grinds are beautifully crisp. The machining is outstanding. And the mirror polish is flawless. The net result is stunning. There is nothing else like a Rockstead blade.

Rockstead Higo Blade

Rockstead offers the Higo in two blade steels: a DLC Coated YXR7 version (shown here) or an uncoated ZDP-189 version. YXR7 is a high speed tool steel manufactured by Hitachi. YXR7 has the enviable combination of being tough, but also being able to be heat treated to a high hardness. Here is a link to the zKnives data sheet on YXR7.

Rockstead states that it’s the durability of the YXR7 that allows them to put an ultra thin 3 micron thick coat of DLC over the blade. Paired with a less shock resistant steel, the DLC coating would crack like an egg shell. But when paired with YXR7 the shock is dissipated and you are left with an otherworldly blade.

Each knife is individually checked for hardness, and Rockstead reports that on the information card that comes with the knife. My particular knife was heat treated to 65.2 HRc. Impressive.

Rockstead Higo Closed

OK, this is normally the part of the review where I comment on the real world performance of the knife after extensive carry and use. That never happened with the Higo. It’s just too nice of a knife for me to get down and dirty with.

Furthermore, I’m concerned that if I used the knife I’d be unable to sharpen it. Especially this DLC coated variant. With the ZDP-189 version you can probably maintain the edge with careful stropping. But here, only a teeny tiny bit of the edge is exposed. The rested is coated in DLC. How the hell do you sharpen this thing? Rockstead offers a “free sharpening service” but you need to ship the knife back to Japan for that. Sorry guys, but I didn’t want to go down that path with this knife.

I will say I’ve been to the Rockstead booth at Blade Show a few times and they had many samples available, and they would cut phone books and rope with the knives at the show. They can certainly cut, and from what I understand they hold an edge unlike anything else thanks in part to the insane hardness and unique blade geometry.

But I can’t speak from personal experience. Instead, I’ll embed a video from Rockstead showing some of their performance testing:

Handle, Ergonomics, and Pocket Clip

Compared with the magnificent blade, the handle is a little less interesting. It’s still beautifully machined, but lets face it, few things can stand up to the blade of a Rockstead. Here we have black anodized duraluminum handles. A pleasant wave pattern has been milled into the handles. Execution of the handles themselves is great, but one area leaving me wanting a little more is with the hardware. The hardware almost appears like cheap pot metal compared to the blade. I’d love to see some decorative hardware or polished hardware to match the blade. As it stands, it appears more like an after thought. At this price everything needs to be special.

Rockstead Higo Handle

I have no complaints in the ergonomics department. This simple and straight forward handle design. There is plenty of room, and an absence of excessive curves and ‘ergonomic features’ means that the handle will be comfortable for most people. That said, you do get light jimping on both the top and bottom of the blade, toothier jimping on the handle, and a finger choil. All of this stuff has been exercised with a degree of restraint to the point where it all plays in the background. It’s the ergonomic equivalent of muzak. Present, but hard to register unless you pay close attention.

Rockstead Higo

The pocket clip is downright primitive compared to the rest of the knife. It’s a DLC blackened spring style clip, mounted high on the handle for deep carry with a single torx screw. There is nothing wrong with any of this, but it is crudely stamped “MADE IN JAPAN”. Not the end of the world, but not the most elegant solution either. Given the attention of detail lavished on this blade I would have expected a little more.

The good news is that the pocket clip works great, and the knife carries well. It’s a long knife, but thin and lightweight, so you don’t notice it much. The pocket clip has good spring retention, so it keeps the knife planted in place, and it all but buries completely in your pocket. Not bad, but not amazing either.

Rockstead Higo Pocket Clip

The clip is also a fingerprint magnet. Much like the blade.

Deployment and Lockup

The Higo primarily makes use of dual thumb studs to get the blade open. The thumb studs are prominent, and the blade is easy enough to open with either hand. Additionally, the exposed tang when closed gives you the option of a “front flipper” of sorts. You can’t actually flip the blade open, but you can get the blade mostly open with this faux flipper.

Rockstead Higo Spine

The blade rotates fluidly on generous phosphor bronze washers. It isn’t a fast deploying knife, but it feels purposeful.

The frame lock of the Higo engages with a soft click. It’s an aluminum framelock with a stainless steel lockbar insert. I think it is interesting to note that the lockbar insert has also been given the DLC treatment. Little details like that are good to see. Frankly I expect them on a knife this expensive. Lockup is a solid 50% and there is zero blade play of any kind.

I struggled to find a good knife to use for the size comparison section. The blade of the Higo is so tough to photograph, that I ended up choosing the Zero Tolerance 0450CF. The matte DLC blade on the 0450CF made it possible to get a workable photo.

Rockstead Higo vs. Zero Tolerance 0450CF

Blade centering is absolutely perfect on my knife. Once again at this price point I would expect nothing less.

Rockstead Higo Review – Final Thoughts

On one hand the Higo is a stunning knife. The blade is unlike anything else I have reviewed. It’s an otherworldly work of art. You simply won’t find anything else like it on the production market. That beautiful blade is combined with an elegant handle. It is a juxtoposition of Japanese elegance and their fanatical pride in what they do. Rockstead has taken the production pocket knife to extremes few of us would consider. In these ways the Higo is a truly special knife.

On the flip side I don’t think this is a particularly practical knife. It’s so expensive I’m hesitant to use it. And if I were to use the knife, it would be damn near impossible for me to sharpen it. Perhaps if I selected the non-DLC coated variant I could strop this thing, but I don’t know how I would sharpen this DLC coated blade with its impossibly small microbevel edge. The only answer is to send it off to Rockstead. They will sharpen it for free provided I can prove I’m the original owner, but I would need to ship the knife to Japan at a considerable expense and risk.

For these reasons I cannot recommend this knife as a daily carry, unless you are a talented sharpener and willing to use a near $1,000 folding knife. Most people won’t do that, and of the few that will actually purchase a Rockstead Higo, I suspect they will treat the knife like I have: gingerly. With so many great $50-200 folding knives in my collection, the Higo has been relegated to a safe queen and curiosity. It’s a beautiful safe queen, but a safe queen none the less.

Buy the Rockstead Higo at BladeHQ
Rockstead Higo
From: BladeHQ

I recommend purchasing the Rockstead Higo at BladeHQ. Please consider that buying anything through any of the links on this website, including Amazon.com, helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Collectable Knives, EDC Knives, Folding Knives, High End Pocket Knives, Rockstead Knives Tagged With: dlc, Frame Lock, Made in Japan, YXR7

Spyderco Delica 4 Wharncliffe Review

by Benjamin Schwartz 7 Comments

Last Updated: July 27, 2019
I’ve been vocal in my dislike of the Delica. I’ve been critical of its ergonomics, its steel, its price point. I was convinced that it was overrated, past its prime. I implied that it only continued to sell because of the years’ worth of mythology that surrounds it. In short, I said it was a bad knife, and I was wrong.

Spyderco Delica Wharncliffe
Buy the Spyderco Delica Wharncliffe at BladeHQ

Buy on Amazon

As I have slowly learned in recent times, the Delica was and is a truly great knife. It’s still a benchmark for quality and utility in the mid-price bracket. So when Spyderco revealed the Delica 4 Wharncliffe I snapped one up to review. It was an opportunity to approach the Delica from a critical perspective and formalize a lot of the good things I have come to think about it.

–Well, assuming that the Wharncliffe blade wasn’t a total catastrophe, of course. Does the new blade shape make the classic EDC option better, worse, or just different? Let’s take a look.

General Dimensions and Blade Details

The D4W has a cutting edge that is 2.5” long and a total blade length of 3”. Its handle is 4 1/8” and it has an overall length of 7”. It weighs 2.4 oz. and is made in Seki City, Japan. Like the standard Delica it is designed for EDC, and all of its dimensions are well-suited for that role except one, which I’ll discuss later on.

Spyderco Delica Wharncliffe Blade

The Wharncliffe provides an interesting shift in cutting attributes. It’s less a matter of performance than of control. A synergy between the angle of your grip in relation to the point means that it always goes exactly where you want it to, opening packages and boxes with surgical precision. It feels as responsive as if I were aiming with a laser pointer. In that same “normal” grip the straight main edge is angled upwards too, pre-situated for an aggressive cutting approach.

There’s a bonus grip that the Wharncliffe shape especially excels at. Because the blade itself is so wide, you can move up it in a modified pinch grip that gives you supreme control. You can use this grip on the standard Delica too, but it feels better here with the extra steel in hand. And there’s something very people-friendly about it (probably because you’re palming most of the knife), so if you’re opening something around others this may become your grip of choice.

Spyderco Delica Wharncliffe Pinch Grip

I’ve been dismissive of VG-10 in the past but I’ve come to appreciate it. It emphasizes ease of maintenance and in an EDC blade that’s great. Rust resistance is superb, edge retention is reasonable, and sharpening isn’t too much of a chore. Be forewarned: it does take more time than AUS-8 or 8Cr13MoV. It might not feel like you’re improving the edge at all, at first. But stick with it and all of a sudden you’ll notice it getting very sharp. I also find that straight edges are easier to sharpen than curved ones on a rod-based system, so if you have a Sharpmaker or similar setup you’re in luck.

Handle, Ergonomics, and Pocket Clip

We’re all familiar with the Delica handle shape: a simple curve with three separate finger grooves sculpted into the FRN scales. Bi-directional texturing, nested and milled stainless steel liners: a familiar construction, but a stable, durable, and proven one.

Spyderco Delica Wharncliffe Handle

It took me a long time to appreciate the Delica’s ergonomics. The three grooves seemed restrictive; there was basically only one way to hold the knife. But that one way is comfortable and effective.

I’ve already talked about how on this Wharncliffe model it helps align the cutting edge, but in general Spyderco has done a lot with a relatively narrow handle. Once you get the hang of it, it feels roomy and right. I used to have trouble getting my fingers to align with those grooves, but now that rarely happens; I guess I developed some kind of muscle memory or something. It’s also worth noting that the grooves aren’t sharp enough to be uncomfortable even if your hand isn’t perfectly aligned on them. This design could be improved with a true finger choil. As it is, with the D4W in particular the modified pinch grip on the blade makes up for this somewhat, and you can put your index finger underneath the kick in a rough approximation of a choil if you want.

Spyderco Delica Wharncliffe Ergonomics

The classic spoon clip is still the best clip Spyderco makes. I like the increase in durability over the wire clip, and I don’t think the lack of deep carry is much of a loss – I like having a little bit of knife exposed to grab onto. It’s a perfect fit for the Delica, too, with the pinch point being near the center of the knife to keep it from swinging around in your pocket.

There is one issue of note with the D4W and that is its width. It’s as wide as a Paramilitary 2 in the pocket. That’s a significant deviation from slimness of the standard Delica 4 and worth being aware of before you make the purchase. I like being able to reach into my pocket and not have my knife blocking up the passage, and while the D4W is by no means terribly wide it is definitely noticeable, and definitely worse when compared to the vanilla model.

Spyderco Delica Wharncliffe Pocket Clip

Spyderco could have changed the blade profile, making it less bulbous, but it was kept this way by design. The D4W came to be after a Spyderco forumite drew it up to meet his specific needs during the workday. One of his requirements was to have a wide enough blade so that it could be easily opened with two hands if need be, and the extra material helps with that. It also helps with the modified pinch grip. Taken in context, the wide blade is actually a “feature,” albeit one that comes with a serious drawback, so be aware.

Deployment and Lockup

The Round Hole works as good here as it has on every other Spyderco knife since the dawn of time. Comfortable and ambidextrous, it doesn’t really get any better than this. As a lockback, the Delica 4 Wharncliffe isn’t going to have the fastest deployment in the world, but it is certainly adequate, and over time as the parts wear against each other it will get smoother and smoother. My five year old Delica is nice and buttery. This is a knife that will age gracefully.

Spyderco Delica Wharncliffe vs. Spyderco Delica 4

Durability and reliability will be high with the D4W’s lock. In my example there is no side to side or up and down play, and no lock flex except in the heaviest cuts. Lockbacks are also naturally ambidextrous – a nice synergy with the Round Hole and symmetrical handle design on the Delica. I also appreciate that disengagement is not overly stiff – some lockbacks are real thumb bruisers, but this one is nice and easy, without being dangerously loose or anything.

Delica 4 Wharncliffe Review – Final Thoughts

The Delica 4 Wharncliffe is a great addition to the Delica corral. A new blade shape is a meaningful change and one that will, I think, work for certain types of users better than the normal drop point. The additional width in the pocket is a bummer and is the biggest flaw I can see in what is otherwise a pretty spectacular EDC.

Truth is, a lot of users won’t care about the additional pocket space required. They’ll relish the extreme control and precision of the Wharncliffe blade shape, qualities that are enhanced by the time-tested Delica handle design.

So I’m glad of the opportunity to talk some sugar about the Delica in general, and also happy to report that this new version is entirely worthy of your attention on its own. It doesn’t make a great design any better, but it’s a different, valid interpretation of one of the best EDC knives in the world.

Spyderco Delica 4 Lightweight Signature Knife with 2.87' Wharncliffe Steel Blade and High-Strength FRN Handle - PlainEdge - C11FPWCBK
Spyderco Delica 4 Lightweight Signature Knife with 2.87" Wharncliffe Steel Blade and High-Strength FRN Handle - PlainEdge - C11FPWCBK
  • Superior Blade Steel - One of the most unique variations among Spyderco's designs, the Wharncliffe Steel Blade is known for its perfectly straight cutting edge capable of cutting with scalpel-like precision and power far beyond its size.
  • Premium Quality - Available in PlainEdge or fully serrated SpyderEdge, it features a full-flat-ground VG-10 Stainless Steel blade for exceptional cutting performance with a fully accessible Trademark Round Hole that supports one-hand opening.
  • Dependable FOLDING UTILITY KNIFE - Paired with the time-tested lightweight design, Delica 4's handle is injection molded from tough Fiberglass-reinforced-Nylon and includes a sturdy back lock mechanism, with skeletonized Stainless Steel liners.
  • Enhanced Safety - Its four-position pocket clip allows both left and right-handed carry, tip-up, or tip-down for a better and more enhanced safety among users.
  • Pocket Friendly - One of the most ideal pocket-sized tools available, this folding knife is perfectly suited for everyday utility use and can be used for hiking, hunting, camping, or everyday carry.
$88.20
Buy on Amazon

If you are thinking of buying a Spyderco Delica Wharncliffe, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Filed Under: EDC Knives, Spyderco Tagged With: lockback, Made in Japan, VG-10, wharncliffe

  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to Next Page »

Primary Sidebar

Follow Us on FacebookFollow Us on TwitterFollow Us on YouTubeFollow Us on RSS

Subscribe to Email Updates and Never Miss a Review (No Spam)!

Enter your email address:

Delivered by FeedBurner

Shop BladeHQ

Shop Outdoor Gear on Amazon

Shop KniveShipFree.com

Search BladeReviews:

Best of BladeReviews:

Best EDC Knives
Best Survival Knives
Best Tactical Knives
Best High Value Knives

Copyright © 2023 · Log in