High End Pocket Knives

Chris Reeve Knives Impinda Review

Chris Reeve Knives doesn’t release many new models. And when they do it’s often a variation on a theme rather than a brand new design. That’s part of the reason why the last time I reviewed a CRK was a review of the Sebenza 25 back in 2014. Another interesting tidbit about CRK is that founder and namesake of the company retired in 2016. He passed the company on to his ex-wife, Anne, in 2016. As a divorce lawyer with an overactive imagination, I can only speculate about how that transition went down, but I won’t.

Buy the CRK Impinda at BladeHQ

Buy on Amazon

By my math the Impinda is the first new design since Chris’ retirement (I’m probably wrong so see the comments section for the truth). And this knife a significant departure from their usual fare. The Impinda a slip joint, and lacks their signature ~~titanium framelock~~ integral lock, that they are so well known for. But as usual for CRK, this isn’t a cheap knife. In this case the Impinda retails for a cool $450. That’s a lot of scratch for a non-locking folding knife. Some may view it as a cash grab on the revival in slip joint folders, but CRK enthusiasts may beg to differ.

I’ve reviewed a couple of these modern slip joints and tend to enjoy them. Most recently I reviewed the Hinderer XM-Slippy back in 2018, so I’ve had a couple glasses of the high end slip joint Kool-Aid. Let’s see whether this Impinda still makes me a believer.

General Dimensions and Blade Details

The Impinda has an overall length of 7.15″, a 3.125″ blade, weights 3.38 ounces, and is made in the U.S.A. This one is designed by Bill Harsey. Bill is one of the greats, and for some reason his designs strike me as quintessentially American. Maybe because he has designed some iconic USA made knives, like the Lone Wolf T2.

Obviously a slip joint like this is going to be geared towards the enthusiast EDC crowd. Bougie bros like myself with a penchant for man buns, 3/4 sleeve tattoos, and pocket frosting. Or maybe silver haired Corvette drivers. Either way there is an aspirational element to the brand.

Here’s a size comparison with a couple other slippies in my stable. The XM-18 Slippy, and Fantoni Dewller:

I think it’s a little large to be considered a true “Gentleman’s folder”, but you are welcome to disagree. At nearly 3.5 ounces this is a chunky little knife, so you may want to opt for both belt and suspenders if you decide to take this one out on the town. It’s a good size knife, but nothing crazy.

The blade is an elongated drop point, with a thin swedge and a slight, near continuously curving belly. The blade features a high hollow grind, which is something of a CRK signature, and zero markings. The blade is surprisingly thick: .12″ or a hair over 3mm. This was likely done to match the overall proportions of the knife. Plus, another CRK signature is that they tend to make a stout knife. Their fanbase is notoriously fickle, so I wouldn’t surprised if they erred on the side of over engineering.

The Impinda comes in S35VN blade steel. That should be no surprise, as this is the steel Reeve himself co-developed with steel producer Crucible Industries to be a successor to S30V. S35V is an excellent choice for a working knife, as it’s shows a good blend of edge retention, easy sharpening, toughness and corrosion resistance. CRK tends to give their knives a softer heat treat. That makes the knives easier to sharpen and less prone to chipping, but you sacrifice a little edge retention.

In practice, I’ve found the Impinda to be a good all rounder for daily carry chores. I’ve done the usual stuff with mine, and it’s held up great. I’ve opened envelopes, broken down boxes, sliced apples, and performed countless odd jobs as I’ve navigated through my personal and professional life the past month. The Impinda has met every task with cheerful readiness. Sharpening hasn’t involved anything more than occasional stropping and one time I ran the edge over my Spyderco Golden Stone to get a feel for things. This is an easy steel to sharpen and I’ve had zero issues with rust or corrosion.

Handle, Ergonomics, and Pocket Clip

The Impinda features thick full titanium handle slabs with a full stainless steel back spacer. The pieces all screw together, and CRK provides an allen wrench to take the knife apart. The handles are not 3-d machined, only chamferred. Construction is rock solid, and fit and finish is perfect. Just what you would expect. The oversize pivot is a nice touch, while the lanyard hole seems like an afterthought, although I’m not sure what else they could have done.

The Impinda feels decent in hand for a small utility knife. My biggest gripe is that there is a lot of meat in the tail, and the balance point is an inch behind the pivot. As a result the Impinda feels heavy. Some associate weight with quality, so maybe that was the idea here, but to me it’s a heavy knife. Everything about it feels slow and deliberate. Granted, this is a utility knife, and not a combat dagger, but those are my impressions in wielding the Impinda.

Beyond the weight the knife feels good. No hot spots. No texture or jimping at all for that matter. But the generous handle and deep finger choil offers plenty of space for your fingers, and I never felt like I lost control of the knife in use.

The pocket clip is a piece of 3-D machined titanium. It looks like they gave the clip design a lot of thought. It is highly sculpted. Spring tension is excellent on it. The knife stays firmly in place.

CRK ships this knife with a calf-skin slip sheath. That’s how I like to carry my Impinda. I got a new used car recently. It sits low to the ground, and I have been anal retentive about scratching up the seats and door jamb to the point where I’ve actually switched my style of carry to avoid pocket clips while driving around. Plus I’ve never liked using pocket clips at work. I’m a lawyer and wear suit pants most days. The pants are expensive and I don’t want to tear them up. Accordingly, the Impinda has been a great option for me. It has gotten a ton of pocket time with the slip sheath.

Still, the pocket clip works well if you want to carry the knife that way. Here is your pocket clip shot:

Deployment and Lockup

Everything about the Impinda is deliberate. That’s most apparent when you go to open the knife. It takes considerable effort to get the blade out. CRK designed it that way, as it makes the knife much harder to close accidentally as well. This gives the knife serious “Walk and Talk”. By comparison, the action is much stronger than the XM-18 slippy. The action of the XM feels comically light compared to this.

Personally, I like the action on the Impinda. It’s heavy and deliberate, but it’s also smooth. The knife comes with a couple large perforated phosphor bronze washers. I think those that are skeptical of slip joints generally, will find a little more solace in the Impinda. It feels nothing like the action on a Swiss Army Knife, and theoretically it could stand up to harder chores.

Closing the blade is also deliberate. According to a roadside shaman I consulted whilst preparing this review, it takes 5 pounds of force to close the blade on this knife. That may not seem like much, but it’s considerably more force than most commercially available slip joints. Apparently there is patent pending spring technology inside this knife that makes the draw tension only one pound, and the closing tension 5 pounds, but it requires a good amount of force in both directions by my hand. Regardless, I like the beefier action on this knife. As I mentioned, it lends a deliberate feel to the Impinda, and inspires more confidence than the typical slippy.

Here is a parting size comparison with my CRK Mnandi:

Unsurprisingly, blade centering is perfect on my knife.

Chris Reeve Knives Impinda Review – Final Thoughts

The Impinda is a difficult knife to review. It definitely won’t appeal to everyone. Price alone is going to alienate a lot of folks. It’s a lot of money for an unassuming non-locking folder. I don’t know what CRK’s costs are (obviously) but find the price tag to be a bit much, even for CRK. Certainly they are entitled to price their products however they like, but I wonder what the economics would have looked like at $300 or $350. After all, the Small Sebenza costs $375 these days, and CRK fans might argue that you “get less” with this one, as it doesn’t lock. I’m not sure if that is a fair argument, but the internet can be a cruel place.

And to be honest, I haven’t checked out other reviews or the forums on this knife. I don’t know how well the Impinda is selling or what the consumer temperature is on this model. My guess is that it’s a mixed bag.

Personally, I have found the Impinda to be well made and highly composed. Keep in mind, the concept of “value” in the absolute sense goes out the window as you venture into luxury brands like CRK. Certainly the blade on a $20 Swiss Army Knife will do 95% of what this knife can (while opening bottles, driving screws, and helping you assemble an airplane on the way down). But that’s not the point, and is akin to comparing a Casio to a Rolex. While you get more for your money, the returns diminish considerably with each additional dollar spent. The person who buys an Impinda isn’t trying to optimize bang for buck. They want the experience and they don’t care if it costs $350 or $450.

And in that sense the Impinda delivers. It’s solidly made, carefully considered, and totally unique. It’s an experience. It’s the Chris Reeve quality many have come to know and love, in a sleek non-locking package. If the design appeals to you and you can afford it, then I think you will enjoy the Impinda. I’ve enjoyed mine. And like the Mnandi, I plan on keeping my knife for the long term.

Chris Reeve Knives Impinda – From $450.00
From: BladeHQ

I recommend purchasing the Impina at BladeHQ or Amazon. Thanks for reading!

Begg Knives Steelcraft Kwaiken (3/4) Review

by Dan Jackson 4 Comments

I really enjoy Blade Magazine. I’ve subscribed for years, and smile when their magazine finds its way into my mailbox each month. Part of what I enjoy is how they write articles I could never write. Deep dives into the history of custom knife making, coverage of high end customs pieces, and interesting commentary on the intersection of industry, law, collecting, and commerce as it relates to knives.

Buy the Begg Knives Streelcraft Kwaiken at BladeHQ

Sure it isn’t a perfect publication, but Blade Magazine is a treasure trove of sorts, and that magazine combined with the BLADE Show often feels like the glue that binds this whole knife thing together.

Blade Magazine also offers knife reviews, which I also enjoy for obvious reasons. Usually they grab a trio of lower end knives and put them to work. The reviews are genuine and focused on real world applications. The writers are straightforward guys with an obvious passion for the products. I enjoy these reviews for what they are.

However, it’s rare for them to review an expensive production knife. Seems their reviews hit between the $20-$100 range. That’s great, as that’s the price range for a lot of user knives, but we don’t see much on the higher end. That’s where I think BladeReviews and other online “media outlets” can offer something. We can cover the high end.

Which brings me to this Begg Knives Steelcraft Kwaiken. This knife is somewhat ridiculous and expensive, yet undeniably cool pocket knife. As I sat down to write this review, I thought “Why am I even reviewing this?” Because I can and it’s what I enjoy doing. Plus, who else will do it? I don’t see much on this knife if you are looking for a long form written review. Plenty of YouTube videos and forum posts, but that’s about it.

Not that I do this out of any sense of duty. Frankly I enjoy exploring these higher end knives in addition to the more practical stuff. A knife like this would never kick my Para 3 out of my pocket, but they celebrate what’s possible in the world of production folders. I reviewed the Steelcraft Bodega a few years ago and enjoyed it. And I recall handling the pre-production prototypes of the Steelcraft Kwaiken years ago at a Blade Show. This is technically the 3/4 “Sun Tzu Kwaiken”. Time to check one out.

General Dimensions and Blade Details

The Kwaiken has an overall length of 8.37″, a 3.5″ blade, weighs 4.5 ounces, and is made in China by Reate for Begg Knives. As I mentioned, this is actually the “3/4” or “mini” version of Begg’s original Kwaiken, but it’s still a large knife and I’ll simply refer to it as the Kwaiken throughout this review. The full size Kwaiken is no longer for sale as of the time I am writing this article, but it came with a 4″ blade and weighed just under 5 ounces. Too much pocket knife for my purposes.

Here is a size comparison with the Endura and Delica:

This Kwaiken is cold to the touch and it feels heavy. “Dense” may be the better word. It could make for an expensive paperweight if you aren’t careful, and it occasionally serves that purpose in my office. The balance point is back maybe an inch behind the pivot. This is due in part to the heavy titanium backspacer. While I will never consider this to be a heavy duty user, I have carried and used this knife quite a bit.

The blade on the Kwaiken is a large sweeping trailing point. Trailing points are sometimes referred to as a “Persian” style blade due to the exotic look. This is a little different from what is often associated with a Kwaiken, which is inspired by a traditional Japanese short sword. This blade reminds me much more of the Benchmade Bedlam than the Boker Kwaiken.

That said, the blade of the Steelcraft Kwaiken is much more detailed than either the Bedlam or Boker Kwaiken. There are 3 clean grinds on each side. The primary grind is hollow ground, and then there is a long swedge on top. In between those grinds is another faceted grind. Then you have the flat with a deep fuller. Everything has been left with a gleaming satin finish. It has been meticulously ground. The grinds are all crisp, but edges of the quillions have been relieved slightly. So there is nothing sharp on your hand. It’s a thing of beauty.

Begg went with S35VN steel for the blade. If you have an interest in a high end pocket knife like this, S35VN will need no introduction. It has been discussed ad nauseum here on the site and is a staple for makers of high end knives.

But to be thorough, S35VN is a stainless steel developed by Chris Reeve and Crucible Industries especially for blade steel. It’s a successor to S30V, and I have found it to be an improvement over its predecessor. What’s great about S35VN is that it still achieves high hardness (approximately 61HRc) and excellent edge retention, but it’s noticeably easier to sharpen over S30V. It is also corrosion resistant and takes a beautiful finish as you can see.

In practice I found the blade of the Steelcraft Kwaiken to be as functional as it is beautiful. That trailing point tip can be a little awkward for things like coupon clipping and other fine tasks involving the point, but the long curving edge provides lots of leverage and is highly effective at larger tasks like carving long peels of wood off a 2 x 4, and breaking down cardboard boxes.

Blade stock on this piece is relatively stout at nearly 4mm. That thick blade combined with the partial flat grind means this knife doesn’t produce translucent slices of apple, and it tends to “pop” materials open at the shoulder of the blade, but this is a larger knife. If you don’t mind potentially marring the delicate finishes, then you could accomplish significant tasks with it.

Handle, Ergonomics, and Pocket Clip

While there is a lot going on with the blade, it pales in comparison to the handle. The handle is where you can really show off, and here the Kwaiken has been richly detailed. This is a full titanium handle, but the eye is immediately drawn to the millwork and carbon fiber inlays. These have been executed brilliantly. Running the pads of my fingers over them, I can feel where the carbon fiber ends and the titanium begins, but they are pretty damn flush.

And the entire handle has been fully contoured. This is what I was referring to when I recently reviewed the Gerber Fastball. Here you have a fully 3-D machined handle that has been executed brilliantly. It’s hard not to be impressed.

In addition you have details like a chunky high polished titanium backspacer with integrated lanyard loop, and custom pivot. The body screws are beautiful machined screws and the holes in the titanium have been slightly countersunk and given a high polish. It’s hard to find fault with the material selection, fit, or finish in this handle. My only complaint is that all this glitz adds heft to the knife. Especially that backspacer.

The ergonomics of the Kwaiken are simple yet satisfying. The handle is long and mostly straight. Plenty of room for all 4 fingers. The two guards or quillions encourage you to hold back on the handle rather than choke up. You can rest your thumb on top of the guard like I did for the photo, but it’s not particularly comfortable. Choking back coincides with the balance point, and suggests to me that the Kwaiken was designed to be more of a tactical knife than a utility knife.

There is little texture save for the geared backspacer and the signature groove running laterally down the handle. Still, I don’t find myself wanting for much more texture. This handle works and easily stays in the hand. If you would like you can choke up on the blade, and there is even a large choil, but it’s not quite large enough to safely accommodate my index finger. I think it’s more for looks and sharpening.

The pocket clip is definitely different. Fans of Begg Knives will instantly recognize it, but the uninitated will no doubt marvel at the milled titanium and oversized ball bearing. It’s a ceramic bearing, but is almost opalescent in it’s reflectivity. It’s a unique detail that you can easily get sidetracked with.

Here is your in the pocket shot:

But how does it work as a pocket clip? Actually, surprisingly well. There is excellent spring rentention and the clip holds the knife securely in the pocket. It’s also a deep carry clip, burying 98% of the handle in your pocket. Only the base of the clip, a couple gears, and that lanyard hole peek out from your pocket. This is a heavy knife, and the bearing does a decent job of holding the knife in place. It shifts a little over time, but doesn’t slide around freely.

Deployment and Lockup

The Steelcraft Kwaiken is a bearing equipped framelock flipper. The generously sized flipper tab is easy to get a grip on. The detent is good, and helps pop the blade out quickly. I’d say the action is around a “7” out of 10. It’s good, but it won’t blow your hair back like a Shirogorov or something. The action is smooth thanks in part to the caged bearing system.

The framelock is excellent. There is a stainless steel lockbar insert, and the lock engages early and is rock solid. There is absolutely no blade play in any direction. There are a couple small thumb reliefs on the inside of the lock bar and frame, that allow your thumb to easily access the frame and release the lock. There is not lock stick or funkiness of any kind. This is how a titanium frame lock should be.

Here is a parting size comparison with the Para 2 and Benchmade Griptilian:

Begg Knives Steelcraft Kwaiken 3/4 Review – Final Thoughts

The Steelcraft Kwaiken isn’t cheap, but at least you get a lot of well made knife for your money. You also get something unique. Begg’s designs strike me as a “like it, or leave it” proposition. You will either immediately gravitate towards the ornate designs, or it will remind you too much of True Religion jeans and Affliction T-shirts. Personally, I like the unique look, and I can’t argue with the execution. If they didn’t make it well, the Kwaiken would seem like costume jewlery. But the fit and finish is outstanding on this knife.

And while there is a heavy emphasis on the artistry, the Kwaiken doesn’t suffer for lack of utility. At the end of the day, this is a well made and fully functional knife. It’s comfortable, cuts well, and carries nicely for what it is. I think the full size would simply be too much for my style of daily carry, but I EDC’d this 3/4 version and was surprised with how well the Kwaiken worked. It’s more than mere pocket frosting, but the design and build quality is what sets it apart.

Will it replace my lightweight knives from Spyderco and Benchmade? No. But, if you have been wanting to check out one of Todd Begg’s designs this Kwaiken is beautifully made and has a lot to offer.

Begg Knives Steelcraft Kwaiken – From $399.00
From: BladeHQ

I recommend purchasing the Steelcraft Kwaiken at BladeHQ or Amazon. Thanks for checking out the review.

Microtech Troodon Review

by Dan Jackson Leave a Comment

I’ve got a couple Microtech knife reviews under my belt at this point, and as far as their automatics go I’ve reviewed the Halo VI and the Stitch. Something that is obviously missing from the picture is one of their dual action Out The Front (OTF) knives. The OTF autos are are the knives Microtech is best known for making. And of course for some reason I waited to pick one up.

Buy the Microtech Troodon at BladeHQ

Oddly enough, it was when a buddy of mine in the real world told me he was picking up a couple Ultratechs to daily carry, it prompted me to think about a dual action OTF of my own.

I went for the Troodon because I thought it looked cool with its angled front. I went with a double edge spearpoint blade for added coolness, but as usual for Microtech you can configure this knife in a myriad of ways. Plus, the knife is named after a dinosaur. I’ll get an Ultratech soon.

General Dimensions and Blade Details

The Troodon has an overall length of 7.65″, a 3.00″ blade, weighs 3.00 ounces, and is made in the USA. This is a nice size knife for EDC, provided you are in a jurisdiction that allows you to carry an OTF knife. They do make these with a single edge, so it’s possible this could be a daily carry for some. Personally, this has been more of a collectible than a true daily carry for me.

Here is a picture next to a Spyderco Sage 5:

As you can see it’s a nice size for EDC. Provided you are in a jurisdiction that permits you to EDC it.

For those wanting something significantly bigger, Microtech offers the Combat Troodon with an overall length of 9.5″ and a 3.8″ blade. Weight comes in at 5.35 ounces.

As I’ve mentioned a couple times, this knife has a dual edged spear point blade. You can also get the knife in a drop point, tanto, or hellhound tanto. Additional options include partial serrations, full serrations, coated, or uncoated in a variety of finishes.

My knife features a satin finish. It has been beautifully ground. All grinds are crisp and uniform. The edges are also nice and even, not an easy job for a double edged knife. There is a deep fuller down the blade that has been further pocketed. It looks cool.

Blade steel is the tried and true M390. I have waxed semi-poetic about this steel for a long time. It’s one of my favorite high end steels, blending the qualities of good edge retention and easy sharpening. It also polishes nicely and exhibits good rust resistance.

I can’t say I’ve used this knife a whole lot. Besides it probably being illegal to carry outside my home, the double edged blade is kind of dangerous for my usual box cutting, apple coring shtick. I’ve used it lightly and treated it as more of a collectible. While I know some people will daily carry their Troodons, a lot will keep them as collectibles.

I will say the Troodon came extremely sharp out of the box. It cleanly cuts thin receipt paper. It will open a letter or a package without a problem. And I have to confess these dual action OTFs are actually very handy because you can use them easily with one hand. My Troodon was epic in the kitchen for opening up bags of produce. It also sliced some roma tomatoes easily, although I was careful to clean the blade after prior to retracting it back into the handle of the knife.

On the subject of sharpening, it’s interesting to review Microtech’s FAQs. They say improper sharpening voids their warranty. I’d be curious to learn what that entails. I’m sure gentle stropping or running the edge on a ceramic rod like a Sharpmaker will not void the warranty.

Handle, Ergonomics, and Pocket Clip

The Troodon features a hard anodized aluminum handle, fastened together with Microtech’s proprietary hardware. Usually, this is the part of the review where I’d take a moment to whine about the proprietary hardware, but this is a knife I have no desire to open up.

Fit and finish is excellent. All the parts line up perfectly, and everything has been finished to a high standard. The hard anodizing is good, but it’s not impervious to wear. My anodizing has worn slightly underneath the pocket clip, and my electrician friend’s Ultratech shows some significant battle scars after a couple months of heavy duty daily carry.

Capping things off is an aggressive glass breaker / “skull crusher” on the pommel.

The Troodon is comfortable in hand. There is a lot of traction on this handle thanks to deep scallops all over the handle. That, combined with the box handle shape, means that this is not a knife that will melt into your hand. But you can definitely get a good grip on it, which is essential for using the dual action button. More on that later.

While the knife will never be as comfortable as an Emerson, the handle design serves its purpose and looks good doing it.

The pocket clip is a deep carry “double dip” clip, a la Chris Reeve Knives. I’ve always liked double dip clips as they help anchor the knife in your pocket. That, combined with the good spring retention and aggressive texture under the clip, means that this knife isn’t going anywhere. Comforting when you shell out almost $400 for a pocket knife.

The clip is another precision machined part marrying form and function. It looks cool without being over-the-top, and is both serialized and production date stamped. It’s anchored in place with that impressively machined glass breaker pommel. The clip can be swapped for right or left side tip up carry, but you will need either a special tool or some patience to un-thread the pommel without marring its finish.

In practice the Troodon carries great. The pocket clip is secure and the knife is light. I’ve carried this knife around the house and quickly forgot the Troodon was in my pocket. I literally forgot I was carrying the knife, to the point where I ended up taking it on an hour long bike ride. Generally I don’t select $400 knives for bike rides, but the Troodon performed admirably, thanks in large part to that double dip clip.

Deployment and Lockup

This section is why you buy a Troodon. It’s a dual action out the front automatic knife. That means the blade both opens and closes with the push of a button. It’s an “Out The Front” automatic because the blade shoots and retracts out the front of the knife. None of this should come as a surprise, but it’s worth mentioning to be thorough.

So how does it work? The button is stiff, and takes a good amount of pressure to actuate. That’s a good thing, as you don’t want the knife to accidentally open up in your pocket. Thanks to the significant force required to actuate the blade, I think it’s almost impossible that the blade would open up accidentally.

When you do apply enough force to trigger the blade it shoots out with a satisfying snap. It feels punchy, but its actually not enough force to be considered a “penetrateor”. This means it’s not designed to be shot into it’s target like a light saber. If you hold an index card an inch or two in front of the knife, it will not punch through the card, and it will instead derail the blade. You can then reset the blade by pulling it out manually. I consider this to be a feature, not a bug. As it stands a knife like this requires a certain level of respect. It’s not a toy and you need to be careful with it.

Here it is next to my Halo VI:

When the knife is open there is a little blade wiggle. Not a lot, maybe half millimeter. That’s the nature of most dual action knives, although, the Deadlock is a notable exception. The blade wiggle is to be expected with these production dual action OTFs. The knives will hold up fine under normal use, but you definitely don’t want to do any prying or chopping with a knife like this.

The blade retracts by pulling back on the button. It shoots into the handle with the same speed and sound. The entire process is novel and satisfying.

Microtech Troodon Review – Final Thoughts

Each Microtech I’ve bought has encouraged me to buy another. They are unique and memorable knives. They aren’t cheap, but they are beautifully made in the USA. The visual flair, attention to detail, and robust nature of their offerings elevates their offerings beyond gimmick.

The Troodon is no exception. These dual action OTF knives are Microtech’s bread and butter, and it’s easy to see why. The action is smooth, satisfying, and undeniably cool. While this knife isn’t a daily carry for me, plenty of folks like to carry these D/A OTFs. Part of the appeal is that you can easily open and close the knife with one hand. In that sense, this is actually a practical tool. But it’s Microtech’s ability to blend form and function that keep me coming back.

Recommended to those who are interested in the design, or a high end dual action OTF automatic. I don’t think you will be disappointed.

Microtech Troodon- From $374.00
From: BladeHQ

I recommend purchasing the Microtech Troodon at BladeHQ or Amazon. Thank you for reading.

Reate Kirby Lambert Crossroads Review

by Dan Jackson 2 Comments

I saw this knife on the cover of Blade Magazine and had to have it. That’s the short version at least, but the story goes back way further than that.

Buy the Reate Crossroads at BladeHQ

I’ve been a fan of Kirby Lambert’s work for years. He was one of those makers that captivated me with his crisp lines and clean work. The knives seemed to belie human intervention. I also remember when Andrew got a Kirby Lambert Wharn. It was late 2012 I think. It actually inspired me to get on Kirby’s books to try and order a Snap. I was on his books, but must have fallen out of line as I never got the follow up email when it was my turn. But that’s OK, a custom Kirby Lambert knife is an object I enjoy lusting over more than actually owning.

But when I saw the Reate Crossroads on the cover of that magazine, and realized it was a collaboration with Reate that could be had at production level prices. Well, its like I said… I had to have it.

And Reate making a knife I “had to have” is kind of interesting. Reate hasn’t gotten much love here. Beyond the Todd Begg Steelcraft Bodega, we haven’t featured a single Reate knife. That isn’t for lack of wanting. It’s more a lack of direction. Their stuff looks great, but their product line seems so deep and expensive that it’s hard to figure out where to begin. If you had to buy one Reate knife, which knife would be “the” Reate to buy? There is no easy decision, but feel free to make a suggestion in the comments. I think it’s the paradox of choice.

In contrast, the Crossroads was a no brainer. That makes it a smart move for Reate. If they can impress the consumer with their collaborations, people will be more likely to try out their OEMs.

General Dimensions and Blade Details

The Crossroads has an overall length of 8.375″, a 3.625″ blade, weighs 5.31 ounces, and is made in China. This is a hefty knife, with a lot of the weight focused around the pivot, so I can’t sit here and say this knife has been a strong daily carry for me. It’s more of a collectible. The knife looks like a pristine custom piece with its two tone blade, custom hardware, and marble carbon fiber hand scales. I’m having time using it hard. But for some this will make a great EDC piece. Others I suspect will baby the knife and keep it more as a collectible. I fall into the latter category.

Here is a size comparison with a workhorse from my collection, the Spyderco Paramilitary 2:

The blade is either a drop point, or a reverse tanto. Hard for me to tell. Or care, if I’m being completely honest. At any rate, there is a blade, and it’s a beautiful blade with a two tone satin finish. The blade has been given a deep hollow grind, and there is a long angled swedge riding most of the blade length. The end result is a functional blade shape with sloping belly, and needle fine tip. But it’s also a unique and somewhat unusual blade shape with what appears to be a broad sweeping shoulder, or a bull neck of steel that meets the top of the bolster.

One odd complaint is that although there is a large sharpening choil, the blade is not sharp all the way down at the heel. There is maybe a quarter inch of unsharpened blade. Hopefully my knife is an exception, but this is an odd omission on a knife that appears to have otherwise been lavished with attention.

Reate chose M390 stainless steel for the blade material. Readers of my various reviews of high end knives will know and love M390 for it’s ability to hold a keen edge, to be relatively easy to sharpen, and resist rust and corrosion. It also takes a nice finish as shown by this beautiful blade.

Despite the heel of my blade being unsharpened, the Crossroads otherwise came exceptionally sharp out of the pouch. Blade stock is relatively thick, but the knife still slices cleanly thanks to that deep dish grind. Can’t say I’ve run this knife hard, but my light duty has shown that the Crossroads is a capable cutter.

Handle, Ergonomics, and Pocket Clip

The Crossroads is a bolstered knife, with your choice of handle scale material over titanium. The bolstered look is a Kirby Lambert signature, and it has been executed beautifully on this knife. You can barely feel the seam as you run your finger over the transition between the handle scale and titanium bolster, at least with this marble carbon fibered version. The hardware is all anodized titanium. The pivot in particular is a striking dual anodized affair. A floating titanium backspacer and lanyard pin rounds things out.

All said this is a beautifully rendered handle and it captures the essence of what makes Kirby’s work so special: his unique aesthetic coupled with an eerie level of fit and finish. There are superb details on this knife and the materials are all top notch. Check out that marble carbon fiber. You can get lost in this stuff:

By and large the Crossroads is a comfortable knife. First of all, the handle is generous and will accommodate most people. The finger choils are large and allow for plenty of room. Sometimes finger choils can constrict the user, but I didn’t find that to be an issue here. There is no jimping, yet the broad spine of the blade provides plenty of room for the thumb.

But I also found that my thumb caught on the tang of the blade. I’m talking about where the spine of the knife meets the stop pin. It’s shaped like a hook, and I wonder if something could have been done to ease that edge. One commandment of knife design is that the only sharp edge should be found on the blade, and in a way this knife violates that cardinal rule.

The Crossroads utilizes a titanium sculpted pocket clip. Some people won’t like this, but I think the titanium clip works great, and compliments the aesthetics of this knife perfectly. The clip has good spring action, and it does a decent job of holding the knife in your pocket. The smooth titanium and smooth marble carbon fiber won’t give you the pocket shredding traction of a Cold Steel or Emerson folder, but I suspect it will get the job done for most people, especially given the dressy nature of the knife.

The Crossroads is a big and bulky knife. There is no way around that, and you will feel the Crossroads in your pocket> Plus, the nature of the the bolstered design puts a lot of weight towards the pivot, so you will get some “pendulum” action if you aren’t careful. Not the best knife for daily carry, but if every knife was as practical as my Native 5 lightweight I wouldn’t have a whole lot to write about.

Deployment and Lockup

The Crossroads is a flipper with a multi-row ceramic bearing system. This is my first multi-row bearing system (MRBS) knife, and part of me is tempted to take it apart to see what that looks like (and show you). The other part of me doesn’t want to dick up the anodized titanium hardware. Been there, done that with my Fantoni CUT Flipper. I still regret the day I tried to take that knife apart and stripped the screws.

Here is a shot of the Crossroads next to my Olamic Wayfarer 247:

I searched online for a picture of the internals of the Crossroads and couldn’t find anything. For now we will all have to use our imaginations and figure that inside there is some sort of MRBS. It appears to be a caged bearing system as I peek into the knife. And I’d believe it given the glassy smoothness to this knife. The blade falls shut easily.

The detent is also ceramic with a crisp and punchy action. There is a detent ramp that adds to the fluidity of the action like the Wayfarer 247, but it still feels different from the 247. The action of the Reate is still sharper and hydraulic. The jimped flipper tab is also sharper, easily grabbing the pad of your index finger. I’d rate the action as a strong “9” on a 0-10 scale. It’s good. Damn good.

For lockup we have a bolster lock. Really, it’s a titanium framelock, but the marble carbon fiber overlay distinguishes this knife slightly from your typical full titanium framelock. Something different.

Lockup is bank vault tight. No play in any direction. The lock is easy to disengage thanks to a small chamfer on the inside of the lock bar. One thing I will note is that the edge of the carbon fiber, where it meets the lock, comes to a sharp point at the peak of the finger choil. I don’t think there is much they could have done beyond changing the design of the knife, but it’s there.

Blade centering is perfect on my piece. As I would expect on a knife like this.

Reate Crossroads Review – Final Thoughts

The Reate Crossroads is a beautiful piece. As someone who has pined for a Kirby Lambert custom for the better part of a decade, the Crossroads had the potential to let me down given the hype and anticipation of owning a Lambert for so long. But I’m pleased to say the knife doesn’t disappoint. It’s a beautiful piece featuring top shelf materials, next level fit and finish, and a dynamic design from Kirby.

But it’s not perfect. In some ways it is finished so crisply it’s uncomfortable. There are a couple sharp edges, namely on the back of the blade where the tang meets the stop pin, and where the carbon fiber bolster meets the lock bar. The knife doesn’t carry that well thanks to all the weight at the pivot. Also the heel of the edge is unsharpened. That may just be an issue with my particular knife.

In a perfect world I’d like to see those issues addressed somehow, but I still see these as relatively minor complaints given the overall splendor of the Crossroads. More of a collectable than an a user, but it’s as close as I’ll probably ever come to owning a custom Kirby Lambert.

Reate Crossroads – From $355.00
From: BladeHQ

I recommend purchasing the Reate Crossroads at BladeHQ or GPKnives. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Olamic Wayfarer 247 Review

by Dan Jackson 5 Comments

Years ago, when I was in law school and just starting this web site, Olamic came onto the scene with their damascus fixed blade knives. They actually reached out to me, to see if I would write an article on their knives for the site. I agreed, as I thought it was pretty cool that a knife manufacturer actually cared about what I was doing, and they ended up sending 3 knives over for examination.

Buy the Wayfarer 247 at BladeHQ

Due to some intellectual property complications on their end I was asked not to proceed with the article, but I still had the chance to check out the knives. They were cool, but never something I would have bought for myself. In fact, not even Olamic knows who buys those things. Ultimately I boxed them up and sent them back at their request.

Since then Olamic has continued to make damascus fixed blades in Russia, but they are best known are their high end folders. Olamic means “everlasting” and their motto is “Never the Same”. That’s because they offer the knives in a near infinite number of configurations. Even their logo is the infinity symbol. Pretty cool.

Originally their folders were true custom pieces, and they still make custom knives, but the Wayfarer 247 is more of a mid tech knife. What I mean by that is the basic parts are pre-machined in Italy, and then the folders are completed by hand in California.

This is a high end folder with the basic model starting at $375, but most of them are priced at $500+ with various hand worked finishes. At that price, it’s no wonder it has taken me this long to buy one of these knives. But plenty of people buy them. In fact they appear to fly off the shelves. The high praise intrigued me, so I ponied up and acquired a 247 for review.

General Dimensions and Blade Details

The Wayfarer 247 has an overall length of 8.125″, a 3.5″ blade, and it weighs 5 ounces. The knives are made in America. This is a larger EDC knife. Olamic recently came out with the Busker, which is more of an urban EDC knife with its 2.5″ blade. I’m sure the Busker is more practical as a daily carry, but the Wayfarer caught my eye with its sleek lines.

The 247 comes in your choice of blade shapes. I went with what Olamic refers to as their “original drop point”. It has a high flat grind, a long swedge, and a fine clipped point. My blade has been given an excellent satin finish, but you can also get the blade stonewashed, coated, or two tone. The grinds are pretty crisp, and the edge is neat and even. There is a sharpening choil so you can easily sharpen the knife all the way to the heel. It’s a nice functional blade shape.

For blade steel we have M390. I think that’s all they are offering the knife in currently, as I don’t see an option for blade steel on their website. That’s fine by me as M390 is good stuff. Relatively easy to maintain, excellent edge retention, good toughness, stainless, it has a proven track record as a high end knife steel.

I bought this knife used off the forums, and it came with what appears to be the used factory edge. The prior owner had nicked it in a couple spots and it was quite dull. So to bring the edge back I started out with my DMT Diafold to work out the nicks. I then switched to the ceramic rods from my Sharpmaker.

At that point it was pretty sharp, certainly a workable edge for my basic purposes, but I decided to hone it on my new Spyderco Golden Stone. This is an ultra fine ceramic stone with an interesting ducks foot shape. I thought it would be good for my kitchen knife given the stone’s size and unique configuration, but at this point I’m using it on all my blades. I was able to get an extremely fine hair popping edge with this stone. It is truly an excellent stone and I look forward to reviewing it in the future.

The moral of the story is despite it’s high hardness, M390 is an easy steel to maintain. If I can get it sharp most people will be able to. The knife has held a good edge and has worked just fine for my usual EDC tasks, which these days is mostly opening up cardboard boxes containing cigars and more knives. It makes great carrot sticks as well.

Handle, Ergonomics, and Pocket Clip

The handle is where things start getting interesting. This is a full titanium framelock. Just like all their other knives. You have a wide choice of finishes. My particular knife features holes in the show side slab, a bronze anodization, and their “kinetic earth” finish. The hardware has been anodized as well. The end result is a unique knife.

Everything has been beautifully put together. The titanium slabs are thick, and everything has been nicely finished. Perhaps the most interesting feature is the floating backspacer. It’s a cool detail, and has been given the same finish of the rest of the handle. Another detail is the custom pivot. I’m happy to say Olamic includes a pivot tool with each knife. The pivot looks good, but it’s a little more fiddly to adjust than a regular torx or allen pivot, as the tool has a tendency to slip out of the pivot. At least when I’m using it.

Another cool detail is that you can order replacement sets of hardware for your knife. My guess is that this is mostly for those that want to change up the look of their knife, not so much replacing missing hardware, but either way you are covered.

Let’s turn to ergonomics. This is a comfortable knife. First off, it’s quite thick, clocking in at .46″. The thickness combined with the sweeping full size handle gives you plenty to grab onto. The knife fills your hand, and Olamic has done a great job knocking down any sharp edges. The Wayfarer almost feels like a cold stick of butter in your hand. It’s not slippery, but it is extremely smooth and comfortable. It feels unique when compared with everything else in my collection.

The simple handle design provides one groove for your index finger to nestle into place. Plenty of room even for larger hands. I suppose if you run out of real estate you can always graduate to the full size custom Wayfarer, but that may require a second mortgage. Rounding things out is a short run of jimping on the spine of the blade. The jimping captures your thumb nicely, and strikes a balance between providing traction without blistering your thumb.

The pocket clip is another interesting detail. The clip borrows heavily from the designs found on the Todd Begg Steelcraft Bodega. Olamic licensed it, so no worries there. The clip is a slab of titanium secured by 3 stand offs and then for retention you have an oversize ceramic ball bearing pressed into the titanium.

The end result is a highly robust pocket clip. Spring tension is excellent, so strong I sometimes have trouble getting this knife into my pocket. No worries about it falling out accidentally I suppose. It’s a good stiff pocket clip, and another high end detail.

In practice the 247 carries well for it it is. This is a big chunky titanium frame lock folder. The chunkiness makes it feel great in hand, but the Wayfarer 247 will never carry like my Spyderco Dragonfly, or even my Native for that matter. But the strong clip keeps the knife securely in place. It’s not a deep carry clip, but must of the knife buries discreetly in the pocket. That’s about all I can ask for.

Deployment and Lockup

This is a titanium framelock flipper. There is a lot of competition in this space, but Olamic spent the time to distinguish their knife from the rest. They utilize caged bearings, a ceramic ball detent, an internal stop pin, and a detent ramp. A detent ramp is a small groove or chamfer milled into the tang of blade. What it does is make the action a little smoother when you close the knife. Rather than the ball detent hitting the tang jarringly, this groove makes rentry smoother and easier. Its details like this that help set the knife apart.

And the knife does have a different action than anything else I own. The detent ramp and other details give the action of the 247 an almost hydraulic feel. The blade practically “whooshes” open as if there were a pneumatic piston inside. The blade fires hard no matter what, and the action is smooth and glassy. The detent is strong, but the detent ramp and thick handle smooth it out whether you are opening or closing the knife. Opening and closing the blade of the 247 is a uniquely satisfying experience.

Here is a shot of the detent ramp:

Moving towards lockup, we have a titanium framelock with a stainless steel lock bar insert and an internal stop pin. The internal stop pin is another interesting feature. It makes for a simpler design (no visible stop pin), and it works well. There is zero blade play in this knife. No lock rock, no lock stick, no side to side, no nothing. It’s a perfectly executed framelock. You would expect that at this price point, and Olamic delivers.

Here is a size comparison with the ZT 0609:

A final point is the blade centering. My blade is perfectly centered. I noticed that the pivot came loose during testing causing the blade to wander. and I was able to tighten it back up to true without a problem.

After publishing the review I decided to disassemble the knife. The 247 was straight forward to disassemble. You can see that in addition to caged bearings, there are stainless steel washers to prevent the bearings from wearing into the titanium handles. Reassembly was easy and the knife came back together perfectly.

Olamic Wayfarer 247 Review – Final Thoughts

Olamic’s goal for the 247 was to build a top shelf titanium framelock flipper that can be customized to the end user, yet still sold at a reasonable price. By and large I think they have accomplished that. I detect very little in the way of compromise here, and that is reflected in the build quality and price tag. Every aspect of the knife has been lavished with attention, from materials selection to engineering to finish work, it has all be carefully considered and expertly executed.

Where the 247 really stands apart is in its ability to be factory customized. A handful of years ago “modding” knives was all the rage. You see less of that these days, but the success of knives like the 247 show that people still care enough to want to have a customized knife. The standard 247 is really a blank canvas, and Olamic will do whatever you want with it. Of course it quickly gets expensive, but that doesn’t seem to deter people.

So that begs the question, a knife like the one shown here retails for approximately $500. For that amount of money, would you rather have the 247 or 2 high end Spyderco’s or ZTs? When I plunked my 0609 down next to the Olamic, I could see where the extra money went. Olamic has succeeded in creating a unique feel for their factory custom framelock flipper. The ergonomics and action are unlike anything else I own. The ZT is an excellent knife for the money, but there is no comparison. Especially if you get a base model 247 for around $350. At that price you get the exceptional flipper action and ergonomics without the additional cost of the extra finish work.

And Olamic doesn’t seem to be competing with these major brands anyways. They are essentially building the Chris Reeve Knives of flippers. Actually, I’m not sure if that is still a fair comparison. While CRK may have shown us what was possible with a high end production folder in the early 2000s, Olamic shows us what’s possible today.

Some will scoff at the robust price tag, but this is a high end knife. It simply isn’t aimed at the price conscious. If you want a titanium flipper framelock with uncompromising quality and the ability to “make it your own”, then the 247 is an excellent choice.

Olamic Wayfarer 247 – From $375.00
From: BladeHQ

I recommend purchasing the Olamic Wayfarer at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Native 5 in Fluted CF and S90V Review

by Aaron Shapiro 2 Comments

Several years ago I watched a Nutnfancy video while I was trying to research a new firearm that I had purchased (I did this backwards back then). This led me to the realization that my life wasn’t complete without a pocket knife. My first purchase was a Spyderco and that led to nearly a decade love affair with the brand.

Buy the Native 5 in Carbon Fiber at BladeHQ

Buy on Amazon

Spyderco as a brand started in 1978 in Golden Colorado by Sal Glesser, over the last forty years the brand has explored many different steel combos, opening methods, locking systems, and more. Recently, it seems like Spydero has been ratcheting their game up in order to compete with the KAI brands (Kershaw, ZT, etc) and Benchmade by adopting super steels, exploring more complex finishing methods, and partnering with notable custom knife makers/designers.

Today we are looking at the Spyderco Native 5, first introduced in 1997 as the Native, but not just “any” Native 5, the [easyazon_link identifier=”B0199VGG7Q” locale=”US” tag=”brdfkdfk-20″]Fluted Carbon Fiber/S90V[/easyazon_link] premium version of the knife. The Native has been in Spyderco’s catalog forever, and is arguably one of their best EDC blades. This special edition is like cranking the amp to 11. However, before we go any further let’s review some specs:

Blade: 2.875”
OAL: 7”
Thickness: .436” not counting clip .623” with clip
Blade Thickness: .127”
Steel: S90V
Weight: 2.8 oz
Lock: Lockback
Made in the USA

All Measurements are my personal measurements and may differ from the manufacturer’s specifications.

Blade

The Spyderco Native 5 is one of the brand’s famously leaf shaped, flat ground blades. I’ve always loved these because they simple excel at most daily EDC tasks. In my case that’s generally relegated to slicing some fruit for lunch, opening packages, and the like and it has been a joy for that.

The Native’s blade tapers to a sharp and delicate tip that will fulfill any and all of your puncturing desires. Aesthetically the flat grind is accented by a small but well placed swedge that runs the majority of spine but doesn’t interfere with the height of the grind.

As for the steel, I think this is where it really gets interesting; S90V is a powdered steel from crucible that’s known for its fantastic edge retention and stain resistance. In my experience I have found that S90V prefers a toothy “utility edge” if you will, which Spyderco happily provides from the factory—the nice thing is you won’t need to sharpen it for a long, long time.

Handle, Ergonomics, and Pocket Clip

Spyderco wanted to make this particular Native 5 to be as agile and unobtrusive as possible. To do that they made the handles out of two solid slabs of CF and opting to not use liners at all. The clip screws directly into a larger portion of the backspacer/spring assembly as opposed to a liner. This has resulted in a knife that weighs less than 3oz. Spyderco then went and added this starburst style milled texture to the handle scales which offers an excellent grip when in hand.

Grip texture aside, the shape and flow of the handle allows you to get a solid full hand grip on the knife—there’s a solid choil towards the front that will prevent you hand from sliding at all, or you can jump it with your index finger for a more “choked-up” grip if needed. The result is a great working knife that is comfortable in a variety of grips.

The clip is Spyderco’s their regular spoon style three screw clip. I feel like this is a fairly known-quantity at this point. They use similar clips all across their production line from entry level (think Tenacious) to high-end as you see here.

Not much that I’d really critique here. I like this clip and I feel that it does its job well. Some folks prefer deep carry clips, I do not, but I believe there are after market options available to you if that’s something you’re after.

Deployment and Lockup

Being a Spyderco the Native 5 makes use of a 12.6mm hole opener or “spydiehole.” I’ve always been a fan of these and this one is no exception. The “action” of the knife however is different than most Spydercos in that it’s a lock back, and because of that it has tension from the lock across the blade then entire time it’s opening. It’s not really a “flickable” knife in the normal sense.

The lockback itself is very well executed; smooth while opening, and pop’s into place with a resounding click. The tension on the spring isn’t too tight when releasing the lock, however closing the knife, for me, is a two handed operation or maybe one hand and the back of your leg—you get the idea. As you’d expect there’s zero play in any direction, the knife as a whole feels extremely solid.

Spyderco Native 5 in Fluted Carbon Fiber and S90V Review – Final Thoughts

In my mind there are two real competitive options when it comes CF/S90V production knives. The first is the Benchmade 940-1 and the second is this one. Before I wrap this review entirely, I want to give a little compare/contrast of the two and offer a personal opinion if you’re trying to choose.

BladeHQ currently has the Benchmade priced at $267.75 vs the Native at $233.97. The Benchmade is a larger knife in a slimmer profile, offering around half an inch more blade than the Native. Due to the Benchmade’s thinner handle it’s going to present a better profile in pocket than the Spyderco will. The Native, however, feels rock solid in every way once opened whereas I am able to muscle some movement out of the Benchmade’s lock when opened. This doesn’t mean that I’d expect the Axis lock to fail, but it will come down to personal preference as to whether you’re okay with some wobble. The two knives are the same thickness and roughly the same weight.

Basically I think it’ll boil down to a few things: The first and most obvious will be cost, the Spyderco is ~$30 cheaper, this might matter to you, and if it does there’s no need to go any further. The second is lock preference. While I think the lock back on the Native feels tighter then the Axis, I do prefer the Axis from a usability standpoint; it also allows you a knife that you can flick open and closed. The third and final thing to consider is just the overall appeal.

Personally, I love the finish to the Benchmade’s CF with the faux milled bolster and how it tapers towards the top and bottom. The Spyderco’s sunburst fluting is cool, but much more subtle and it gives the CF more of a matte quality dampening down some of the dimension in the weave. For those reasons, I think if I had to pick one, I’d still get the Benchmade… but that’s just me. The Spyderco, as my above review has shown, is an excellent piece and a capable tool.

In the end, I think either knife would be suitable for two people primarily… a newer collector that’s looking to branch into higher end materials but isn’t quite ready to make the jump to CRK or customs yet or the seasoned collector that’s looking for a piece to use around the house in the place of some of their more expensive knives. Just my .02.

Spyderco Native 5 Knife - Black Carbon Fiber Handle with PlainEdge, Full-Flat Grind, CPM S90V Steel Blade and Back Lock - C41CFFP5

An Improved Classic - The Native model has been a mainstay of Spyderco's product line for years as a result of it's Superior Quality and affordability. The state of the art Native 5 is available in an array of handle choices and colors.
USA Made - Spyderco takes tremendous pride in every knife we make, but the ones crafted in our Golden, Colorado factory are special because we invest a piece of ourselves in every USA-Made knife we create.
Superior Quality - This Carbon Fiber handle is made of graphic fibers woven together then fused with epoxy resin. This solid, yet lightweight handle is intricately machined with a fluted sunburst patern.
Dependable - If you are looking for control and precision, look no more. This knife features our PlainEdge grind which is known for creating a smooth and exact cut.
High-Strength Lock - The Back Lock mechanism is known for it's high-strength and ease of use. The locking system is positioned on the back of the handle.

I recommend purchasing the Spyderco Native 5 in Fluted Carbon Fiber at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Editor’s Note: The original Native 5 has grown on me steadily over the past few years. It is at the point where I prefer my Native 5 over my Sage 1 for daily carry (gasp). I like it more than the Sage because it is lighter, and the pocket clip is sturdier. The fact that it’s a USA made piece doesn’t hurt either. It’s a great size for EDC and has proven itself to be a tremendous work knife. To me this upgraded version of the Native 5 looks excellent and I’ll look to snag one for myself.