Folding Knives

DPx Gear HEST/F Urban Review

DPx Gear has been at it for a while now. They caught everyone’s attention with the original HEST fixed blade knife in 2008. Their first folder was the HEST/F, a knife I reviewed back in 2012. It was promising in a lot of ways, but ultimately a sticky lock and ponderous footprint kept it from being a truly covetable piece of urban EDC gear in my book.

Buy the DPx Gear HEST/F Urban at BladeHQ

No products found.

Since then we’ve reviewed a couple other DPx Gear folders, including the elegant Aculus and the cherry bomb proportioned HEAT/F. Both were beautifully made Italian knives. The HEST/F Urban is different from the other folders in that it is their first folder 100% made in the USA. Some may remember that DPx ran a Kickstarter campaign for this knife back in 2015. The Kickstarter campaign was a success, and the knife has since made it’s way into production.

Robert Young Pelton himself reached out to ask if I would review a HEST/F Urban, and this knife was provided to me by DPx Gear for review. All thoughts on this knife are my own.

General Dimensions and Blade Details

The Urban has an overall length of 6.75″, a 2.875″ blade, and weighs 4.27 ounces. The knife is made in the USA. As the name suggests, this is a smaller folder designed for urban or suburban Every Day Carry (EDC). DPx Gear has made some big and interesting stuff over the years, including their HEFT 12 Chopper, so to see them move towards a true urban daily carry knife is interesting.

Here is a size comparison with the Urban next to my Spyderco Sage 1:

The HEST/F Urban features the same signature blade profile of their entire HEST series. It’s a drop point with a big sweeping belly, that tapers upwards towards the tip. The shape reminds me of the profile of a boat. The integrated cap lifter / wave feature is another novel aspect of the blade and a signature RYP design element. I’ll discuss the functional aspects of that further in the “deployment” section of the review.

The blade is ground from over 4mm thick stock. It’s substantial for a small folder like this, but the high flat grind gives the knife decent slicing performance. I found the Urban to be very capable with cardboard working through several thick cardboard boxes that I encountered in my latest round of work with my rental property.

The blade was extremely keen out of the box, and edge retention was excellent. The thick stock and partial flat grind means it won’t slice an apple like a traditional folder, but the knife will get the job done, and there are plenty of practical touches. The stonewashed finish on the blade hides wear and matches the hardware. There is a sharpening choil. And the edge has been evenly applied, a detail I always consider, as it can be a good indicator of quality control.

In 2015 the Urban was originally offered in S30V blade steel. These days the Urban has been upgraded to S35VN. I’ve reviewed dozens of knives in S35VN at this point. Although it may not be the most exotic choice of blade steel, S35VN is excellent stuff and was a good choice for the Urban. This is a proven steel that holds a good edge, sharpens easily, exhibits high corrosion resistance, and is reasonably tough which means it will not chip out easily. S35VN is a great all round high performance blade steel.

I find that if you don’t completely dull the knife, then all you need to do to maintain a hair shaving edge is run the knife along the fine stones of the Spyderco Sharpmaker. Those fine stones are all you need to keep a razor edge on this knife.

Handle, Ergonomics and Pocket Clip

The handle of the Urban is comprised of two thick titanium slabs and a black hard anodized partial aluminum backspacer. The handle has been beautifully executed. Fit and finish is top notch. The titanium handle slabs have been chamferred and left with a bead blasted finish. The silver hardware and all the pieces are perfectly flush. There is a decorative oversize pivot. Everything exudes a level of quality that you would expect from a knife at this price point.

The Urban is a small knife, but the spare design gives you plenty of room for a full 4 finger grip, and the thick build fills the hand. I found the Urban to be both a comfortable and capable work knife.

My only gripe with the ergonomics relates to the “wire stripping jimping”. Specifically, the biggest jimp farthest away from the tip of the blade. I find that to be too grabby for my tastes and would prefer either a smaller jimp, or more traditional toothed jimping. I levied this same criticism against the original HEST/F. While I understand that the Urban is designed to have a few multi-tool features integrated into the design, I’m still not sold on the wire stripping jimping.

The Urban features a reversible tip up deep carry pocket clip. The clip has excellent spring strength, and it buries the knife into your pocket. While the knife is relatively thick and over 4 ounces, I don’t notice it during carry thanks to the small footprint and the excellent clip. The knife stays in place and out of the way until you need it. That is exactly how I like my folding knives to carry.

Deployment and Lockup

The Urban is interesting because it is a bearing equipped folder with thumb studs or a wave opener. As a lefty I find the thumb studs to be a little tight as there is not as much room to access the stud on the locking side of the knife, but there is plenty of room on the right side and once you get placement on the thumb stud the blade almost explodes open thanks to the strong detent and bearings.

The bottle opener on the blade doubles as a wave opener. It’s an easy knife to wave off your pocket. Additionally you can use this as another spot to flick the blade open in addition to the thumb studs. The bearings are smooth to the point where you can easily shake the blade closed.

For lock up DPx Gear went with a titanium framelock reinforced with a steel lock bar insert. The steel insert doubles as an over-travel stop, but it also fixes the sticky lock issue that plagued the original HEST/F. Lockup is early. Around 40% of the lock face engages with the blade. Lockup is also secure. There is not a shadow of blade play in this knife. It’s rock solid.

Here is another size comparison with the ZT 0454CF:

I think DPx Gear nailed the lockup and deployment section. The knife rivals any Zero Tolerance folder I’ve handled. I think ZT is a good benchmark as their knives are consistently good. I think at some point DPx will need to use this OEM to build them a flipper of some sort.

Blade centering is perfect on my knife.

DPx Gear Urban Review – Final Thoughts

Hands down this is the best DPx Gear folder I’ve handled to date. I think they took all the lessons learned from their prior designs and built on those lessons to develop the Urban. I also think that the choice to work with a US based manufacturer is a good one. I like Lionsteel knives, but was never a big fan of the original HEST/F and the way it was built or the rotolock. This Urban is simply a better knife with its bearings and stainless steel lockbar insert. The rest of the knife has been beautifully built. The parts line up perfectly. The machining is crisp and clean. The finish work is superb.

For constructive criticism my biggest gripe is probably that one section of wire stripper jimping. It’s a little too sharp and toothy for me. But in practice I didn’t find that to be a deal breaker as I didn’t notice the jimping much when I actually cut things. Beyond that I don’t think I would change anything on this knife.

If you are a fan of sturdy little full titanium knives, knives like the Spyderco Techno, then I think you are going to enjoy this one. It’s nicely built, performs admirably, and is entirely unique. It’s not inexpensive, and the full titanium version here will set you back about as much as a Small Sebenza, but I think the quality is comparable. Additionally, DPx Gear offers a version of the Urban with a G10 scale that is around $200 and weighs about 3.6 ounces. At that price and with a near 1 ounce weight reduction, I think that is a highly competitive offering.

No products found.

I recommend purchasing the DPx Gear Urban at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade Proxy Review

by Dan Jackson Leave a Comment

Last Updated: September 7, 2019
Warren Osborne is one of the most recognized names in knife making. While he was an extremely talented custom maker, a large part of his renown is due to a series of high profile collaborations with Benchmade. The 940 is one of the most notable collabs, but Warren Osborne is also known for designing the Rift and Barrage, among others.

Buy the Benchmade Proxy at BladeHQ

Buy on Amazon

Warren Osborn passed away in 2016, after a long a long struggle with a cancer. The Benchmade Proxy was his final collaboration with Benchmade. I happen to think it was an interesting design. Benchmade has only recently gotten into flippers, and this Proxy is one of their takes on a titanium framelock flipper. As Warren’s last collaboration with Benchmade I knew it was something I needed to get my hands on.

General Dimensions and Blade Details

The Benchmade Proxy has an overall length of 8.85″, a 3.87″ blade, weighs 4.86 ounces, and is made in the USA. This is a substantial knife. A bit too much for me to carry on a daily basis, but I’m sure it will make a fine EDC for those that like larger knives. At under 5 ounces, it’s plenty light and pocketable for a near 4″ bladed folder.

The Proxy features a long sloping drop point blade. It kind of reminds me of the head of a shark. For whatever that is worth. It’s a strong blade cut from near 4mm thick stock. The knife has a high flat grind and has been left thin behind the edge. It’s fine for cutting boxes or fruit, and I suspect it would hold up under tougher chores as well. The tip is placed low on the knife. That shortens the belly but makes it good at stabbing things. Benchmade went with what appears to be a matte satin finish. It’s a utilitarian finish that hides wear well.

The most prominent feature on the blade is the oversized sharpening choil. That makes it easy to sharpen, but you lose some edge, and if you aren’t careful material you are wanting to cut can get caught up in the large choil.

Benchmade selected CPM-20CV for the Proxy’s blade steel. This is the same steel my G-10 Griptilian came in, and now that I’ve owned that knife for almost 2 years, I have a little experience with it. Manufactured by Crucible Industries, CPM-20CV is advertised as a steel with high corrosion resistance and wear resistance, and good toughness. Chemically it is similar to M390, which is an excellent steel. CPM-20CV has an extremely high chromium content, which results in its corrosion resistant qualities.

In practice I have found that CPM-20CV performs admirably. It exhibits a nice balance of edge retention and sharpenability, while exhibiting excellent rust and corrosion resistance. To be compared with M390 places it in excellent company, and I consider CPM-20CV to be top tier blade steel. A great choice for a high end folding knife.

Handle, Ergonomics, and Pocket Clip

The Benchmade Proxy features a titanium frame lock mated to a one piece G-10 backspacer and handle scale. Everything is held together with torx fasteners. It’s kind of an odd combination between the light brown G-10, the sandblasted titanium, the satin hardware and the mirror polished clip. The varying textures and angular design almost make the Proxy feel like a small piece of modern art. The build quality is excellent. Tolerances are tight, the parts line up, and the 3-D machining on the handles is excellent.

I also like the omission of the lanyard hole. I’m not a big lanyard guy, but you see them on pretty much every knife. It’s refreshing to get something without a lanyard hole. While that is bound to piss some people off, personally I don’t miss it.

The Proxy is a large and comfortable knife. It’s got a big simple handle, so it will conform to most hand sizes. There is little in the way of texture on the knife, but still my fingers fall naturally in place. Warren did design a forward finger choil, and that feature allows you to choke up on the blade and get close to what you are cutting. You can also choke back on this handle, providing you a couple inches of additional reach. Potentially useful if you have to do some light chopping or use the Proxy in a “tactical” application.

The pocket clip is Benchmade’s split arrow clip, buffed up to a high shine. While I generally like the split arrow clip, I’m not a huge fan of the shiny version shown here. It’s kind of loud and it doesn’t match the rest of the knife. It feels out of place, although I’m not sure what I would have put instead of this clip. I probably would have reconsidered the entire hardware selection, finishes, and color choice.

The Proxy carries well considering it’s almost a 9″ folding knife. The sturdy split arrow clip, and bead blasted titanium handle work together to provide good traction without tearing up your pocket. At .5″ thick the Proxy is not the thinnest knife, but it’s not the thickest either. Benchmade milled out some large grooves to make it a little slimmer and more pocketable. All said, I think the Proxy is not a bad knife to carry.

Deployment and Lockup

This is a bearing equipped titanium framelock flipper. I haven’t reviewed a Benchmade framelock flipper before, so this is new territory for me. In practice it flips great. I’d say it scores a solid “7” on my 0-10 scale. Maybe a little behind the action you would find on a Zero Tolerance flipper, but not by much. It’s snappy and responsive action and the bearings are smooth. So smooth you can shake the blade closed. Nice.

The titanium frame lock is reinforced with a stainless steel insert. The insert does not double as an over travel stop mechanism, a feature I’ve come to find standard on most flippers from ZT, Spyderco, and Kizer. That said, the lockup on this knife is early, and free of any sort of play. It’s rock solid.

Here is a shot of the Proxy next to my Strider SnG. I chose the SnG because the Proxy borrows the integral G-10 handle / backspacer.

Blade centering is pretty good on my knife. Not perfect. It favors the G-10 side by a mm or so, but is nowhere near rubbing.

Benchmade Proxy Review – Final Thoughts

The Proxy is a curious knife. Warren Osborne made a name for himself providing unique designs, and I think the Proxy continues that legacy. Individually, there are number of seemingly dissimilar components. Added up they all come together. Sorta. Part of me can’t help but feel that this blade was put together with leftovers from Benchmade’s parts bin, but other parts of me appreciate the simple design. The knife is nicely made and is both comfortable to use and a capable cutter. It’s a great work knife.

While it may not be to everyone’s taste, I think the Proxy is a good knife. I appreciate the Proxy and I appreciate Warren Osborne for his contributions to the knife world. I can safely recommend the Proxy for fans of Warren and fans of this design.

Benchmade - Proxy 928, Plain Drop-Point

HIGH-QUALITY: The CPM-20CV stainless steel blade features excellent edge retention, corrosion resistance, and low maintenance. The G10 and titanium handle offers durability and great performance.
WELL-DESIGNED: The 928 features a highly strong and functional Monolock mechanism with the added convenience of a flipper. It's a manual knife that can be opened and closed with one hand.
ALWAYS READY: The 928 combines high performance and a highly modernized look. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Proxy 928's drop-point, utility blade style and all-around functionality make it ideal for everyday use, outdoor activities, and even tactical applications.

I recommend purchasing the Benchmade Proxy at Amazon or BladeHQ. Thanks for reading.

Steel Will Modus F25-12 Review

by Grayson Parker 51 Comments

For most gear geeks, big box stores are a disappointment. Generally the most you can expect to find are some of the nicer Kershaw models, or, if they cater to hunters and law enforcement, a few Benchmades. The one store that broke that model was Sport Chalet. In the year and a half prior to going out of business, the knife case at my local Sport Chalet expanded from the usual suspects – Kershaw, Gerber, Leatherman, a few Benchmades – to include some of the more exotic SOG knives, as well as a few offerings from a relatively new company: Steel Will.

Buy the Steel Will Modus at BladeHQ

Buy on Amazon

At the time, Steel Will was producing high-end backlocks and a range of fixed blades, and though the designs were attractive, I was never comfortable ponying up the $200+ dollars for a knife that was too big to carry on campus. After trying and failing to buy a Gekko 1552 on the cheap at my local Sport Chalet’s closing sale, I put the company out of mind, assuming that they wouldn’t leave much of an impact in the market.

I couldn’t have been more wrong. Nick Shabazz’s review of the Cutjack caught me completely off guard, as not only was this not the Steel Will I was familiar with, but he compared it favorably to the Ontario RAT 1 and 2, both of which are stellar knives for the price. Steel Will was back on my radar, and it was only a matter of time before one of their products ended up on the review docket.

As it turns out, I didn’t have long to wait. Thanks to an informal giveaway hosted by @brancon (a reader, listener, and all-around great guy), I’ve been able to tote the Steel Will Modus F25-12 around for a few months and gather my thoughts on it, which are collected below. Since I came by the Modus because of someone else’s generosity, it only makes sense to pass it along to the community. Read on to learn how you could win one of the better value knives available.

General Dimensions and Blade Details

The Steel Will Modus is 7.625” overall, with a 3.25” blade housed in a 4.375” handle. Though it doesn’t approach the “voodoo” territory of the Kizer Feist, the Modus does fit a wide, long blade into a fairly compact handle. There is no sense of wasted internal volume like there is with, say, the Spyderco Manix 2LW. Due to the nested, skeletonized steel liners, it’s also relatively lightweight at just 3.39 oz, and thus manages to feel stout but not bulky. Fair warning: though it may not feel like a large knife in the pocket, the blade is probably a bit too long for some office environments, and is certainly too long for some city ordinances.

Size considerations aside, the profile of the Modus’s blade is one of my personal favorites, a modified sheepsfoot (which is arguably just a funky drop point). The gentle, continuous curve of the edge is perfect for everyday cutting tasks. It’s just as good at breaking down boxes as it is preparing a picnic lunch, and as most of the spine’s thickness is carried to the tip of the blade, it should be able to handle some incidental abuse without pause.

In keeping with the theme of general utility, the Modus features a high flat grind. When done right, flat grinds are lean cutters that don’t get bound up in stubborn material like cardboard. Done wrong, they’re sharpened prybars. The success of any given flat grind is mostly dependent on two factors: 1.) how thick the blade stock is, and 2.) where the grind starts. A thick blade can be a fine cutter if the grind starts high enough (the Spyderco Techno is a good example), and a thin blade can be robbed of its potential if the grind starts too low (for instance, the ZT0450). The Modus has the best of both: thin blade stock, at just .11” thick, and a high flat grind.

Unlike most imported value knives, the Modus does not have 8Cr13MoV stamped on the blade. Instead, its blade is made of D2, a not-quite-stainless tool steel with a reputation for toughness and edge retention. My experience with the Modus bears that reputation out. It retained a serviceable (if not outstanding) edge after breaking down a pile of boxes, and it didn’t pick up any chips during the task, either. Unfortunately, it is prone to staining, if not rusting, and I’ve gotten into the habit of wiping it down with some cleaner after carrying it for the day, whether I used it or not.

Handle, Ergonomics, and Carry

The Modus’s handle is, in silhouette, a lean, organic, and slightly aggressive design. Its green FRN scales are supported by nested, skeletonized steel liners, as well as a black stainless steel backspacer. That sounds like a recipe for success, and it would have been, were it not for one problem: the handle pattern. The splotchy, mismatched flecks reek of the 1990s. If I more than glance at the handle scales, I’m immediately whisked back to the cartoons and advertisements of my youth.

Despite finding the handle ugly as sin, I can’t deny that it’s ergonomically superb. The finger indexes suggest rather than demand where your fingers fall, the steel backspacer serves as a counterbalance for the heavy blade, and the generous contouring of the FRN scales ensures that there’s no truly incorrect way to hold the Modus. Even the pattern is functionally excellent, as it lends grip without creating a single hotspot.

If a knife is comfortable to hold, it’s comfortable to carry, at least in my experience. The Modus’s slim profile, contoured handle, and unobtrusive weight all suggest that it should be a fine pocket companion. The pocket clip (often an afterthought for designers) is flawless, neither shredding the lip of my pocket nor making the act of stowing or retrieving it a nuisance. Unfortunately, Steel Will has the same problem with flipper tabs that Cold Steel has with, well, knives. Namely, that small isn’t a dirty word. At the risk of parroting Nick Shabazz, he was spot on in calling it a “pocket pecker”. It might as well be a woodpecker, tapping away at whatever else is floating around in my pocket. It’s not a dealbreaker, but it’s certainly not endearing.

Deployment and Lock Safety

Fortunately, the Modus’s flipper tab isn’t a total loss. It may not play well with others, but it does just fine as a deployment method. The tab can be pushed (like a button) or pulled (like a lightswitch) to deploy the blade, and each method works well. I’ve had slightly better luck treating it like a button, as the detent isn’t quite crisp enough to open the blade without a bit of extra force behind it. The pivot runs on washers, and the action isn’t especially smooth. (Take that with a grain of salt, however: I tend to overtighten pivot screws on my knives.)

You know you’ve seen too many framelocks when a liner lock feels like a refreshing change of pace. Snide commentary aside, liner locks – this one included – are great. Compared to framelocks, liner locks are less likely to screw up the ergonomics, they’re easier to replace if something goes wrong, and they’re more than strong enough to handle whatever a rational human would use a knife for. The lock on this particular model consistently engages 30-40% of the blade tang, and there is no lock stick, lock rock, or blade play. Disengaging the lock is simple, as the locking leaf is slightly proud of the FRN scales and machined for extra grip.

Steel Will Modus Review – Final Thoughts

My quibbles aside, the Modus is a great knife, especially for the price. Its D2 blade stands head and shoulders above the hoard of budget knives and their 8Cr13MoV steel; factor in the excellent ergonomics, sturdy pocket clip, and reliable (if not great) deployment, and it’s easy to forgive the Nickelodeon-esque handle pattern and oversized flipper tab.

Even so, the competition is quite stiff. Ontario’s RAT 1 and RAT 2 are highly regarded, feature the same materials, and come in at a similar price point. I suspect they’re even made in the same factory, so really, pick whichever model suits your fancy. The Kershaw Skyline is a perennial favorite, if a bit more expensive. I’d consider the 14C28N steel to be a step up from D2, but others can justifiably disagree. Still, the Skyline is a hair too nice to really abuse, and the more robust Modus is better suited to, say, a construction site.

There’s always room for a knife like the Modus in someone’s toolbox. Those on a budget will appreciate that it punches above its price point, and those who’ve long since abandoned rational purchases will be happy to know that their beater knife is still a well-made tool.

As stated in the introduction, I’m giving the Modus away. All you have to do is leave a comment below. A week after this post goes up, I’ll select one commenter using a random number generator, and ship the Modus out to them. Shipping is on me if the winner is within the United States. Apologies for that, but international shipping is a pain.

Next up: the Tactile Turn Shaker V2.

Steel Will Modus F25-11 Linerlock, Black, 3.27" Blade

Crafted from the highest quality materials
Built for performance and durability
Made in China
Built To Last.

Editor: I recommend purchasing the Steel Will Modus at Amazon or BladeHQ. Thanks for reading.

Spyderco Polestar Review

by Benjamin Schwartz 3 Comments

When you have a thing as simple and relatively unchanging as a folding knife, the most meaningful innovation we customers can see is quality brought to affordability. A few years ago my sincerest wish for the knife market was that manufacturers would turn their attention away from the high-end and back to the sub-$100 arena.

Buy the Spyderco Polestar at BladeHQ

Buy on Amazon

In a way that wish has been granted, albeit in a mild monkey’s paw scenario. The value scale has not so much been reset as it has been smashed to pieces, shattered by products and practices we wouldn’t have even thought of in 2010, blinded by our Tenaciouses. Companies like Real Steel are pumping out affordable knives with great materials and low price tags. Steel Will, Ontario Knife Company, and even knife world-adjacent companies like Statgear have laser-focused on delivering major bang for buck. And on top of all this, Kickstarter and Massdrop allow for small runs of finely made knives with premium materials at two-figure prices.

The problem is no longer a lack of value knives, but rather a surplus of such richness that it’s difficult to identify the real winners amid the churning ocean of contenders. Going knife-by-knife would be a full-time project, so we have to pick and choose – and so I started with Spyderco.

I’ve already talked about the Chaparral FRN, but after that I wanted to go lower on the price scale. This naturally lead to the Polestar, a sub-$100 Sal Glesser design. Where does this Sal Glesser design fall in terms of quality and worth? Let’s take a closer look.

General Dimensions and Blade Details

The Polestar has a 3.3-inch blade, a 4.5-inch handle, and an overall length of 7.81 inches. It weighs just under 4 oz. and is made in China.

There’s something distinctly old school about the Polestar. With its homely lines and wide profile, it looks like one of those lumpy, charming Spyderco designs from the 90s. At the same time it comes across as a more refined Tenacious: skinnier, with a streamlined handle and narrower blade. Given its price, however, the more relevant comparison lies with the Delica and Endura. It falls between the two of them in edge length but is wider than either.

Do we call this a leaf shape blade? Whatever it is, it works wonders. I’m by no means a full flat grind zealot, but Spyderco has a particular mastery of the form. Here the full flat grind enables this medium-sized knife to slice aggressively and cleanly, while still imparting a feeling of durability and sturdiness. The closest analog I can draw is the Paramilitary 2. If you like the way that knife cuts, you’ll find a lot to love on the Polestar too.

The Polestar’s BD1 steel places ahead of the 8Crs and AUS-8, and keeps a significantly cleaner edge than either, even as it dulls. This makes it a viable cutter even at greater levels of wear than its competitors, which often get toothy and uneven as they work. BD1 also shrugs off both rust and staining/smudging.

We’ve seen S35VN and D2 at shockingly low price points recently, but if I had to forecast what will be the next de facto budget steel, CTS-BD1 (and its successor CTS-BD1N) get my vote. CTS-BD1 is a hassle-free steel anyone can manage.

Handle, Ergonomics, and Carry

Before I held the Polestar myself, I wondered if it would be all that comfortable. I shouldn’t have worried: the Polestar feels 100% like a Spyderco. Like all of their best handles, it feels like it’s rushing to meet your hand as you close it around the knife. Despite the plain appearance there are some super thoughtful touches. A dip just behind the thumb ramp accommodates the lower part of the digit more comfortably than a straight line would. An area around the pivot curves inward, creating a pinch point between your thumb and forefinger for detailed, high-control cuts. The Polestar is an unmitigated success in the ergos department.

Carry… well, not so much. This is a wide knife. At its widest point it’s about 1.5 inches across, and unlike other wide Spydercos it maintains most of the width for its entire length. I wouldn’t classify it as an unforgivable pocket hog, but you’re going to notice this one anytime you reach into your pocket, and it probably isn’t a great carry for shorts or slacks. There’s also an inch or so of knife that sticks out during carry; in the tip-up configuration, you get a massive lanyard hole and the Polestar’s little tail out for all to see.

These issues combine to be, for me, a nearly fatal flaw. During the testing period I often just didn’t feel like carrying the Polestar because I had so many other knives, some with equivalent (or greater) blade lengths, that took up significantly less pocket space. On the bright side it’s a thin knife across the spine, thinner than a Tenacious.

The pocket clip is that stalwart standby, the Spyderco spoon. It’s the right choice for this knife, keeping the Polestar in place as you walk. It’s also four-way positionable, so both righties and lefties have a second configuration if the default one irks them too much.

Deployment and Lockup

The Spyderco Round Hole plus phosphor bronze washers is rarely a bad combination, but it isn’t always a fast one. Depending on the lock and structure of the knife, you might have to slow-open whether you want to or not. My Polestar, however, does not present that problem. Its medium-strength detent allows for thoughtless flicking, but it isn’t so jumpy that you can’t roll it out if you want to.

One note: the overall fit and finish on the Polestar were great, but the detent ball did rub harshly against the tang as the knife opened. If I was slow rolling, it made a hoarse, scraping noise. A dab of Nano-Oil on the detent ball fixed this problem, making for a smooth, silky deployment.

I don’t think a lot of people associate Spyderco with liner locks, even though the Military, one of their classics, is a liner lock knife. In fact, according to Sal Glesser, the Polestar idea originated as a concept for a smaller Military designed for the Boy Scouts to use. With this in mind, you can see that influence in the larger-than-normal cutout to access the locking leaf. I thought I wouldn’t like this but over time I got used to it, and I never accidentally disengaged the lock even when gripping the knife hard. And regarding strength, I never lost confidence. The entire locking face contacts the tang, and there is not a smidge of play in any direction. You won’t ever have an issue with this knife during regular use.

Spyderco Polestar Review – Final Thoughts

The Polestar is a good knife. I like it, but I like it more than I’ll carry it, and much more than I can recommend it.

It comes down to that teeming body of sub-$100 offerings right now, and where this knife falls into that ocean. The Polestar goes for about $64 as of April 2018. That’s only $10 cheaper than a Delica or Endura, two knives that it doesn’t beat out in any category, and loses to in several. And it’s only $15 dollars cheaper than the FRN Chaparral, the best knife money can buy for under $100.

Part of what made the Tenacious such a success was its original $35ish dollar price point. Few people would’ve picked it over a Delica or Endura if they cost the same, but access to that Spyderco smartness in a cheap package was an unbeatable combo.

The Polestar is a better knife than the Tenacious, but it doesn’t enjoy the added edge of a good price. Compared to Real Steel’s myriad offerings, or Steel Will’s Cutjack line, it has an unimpeachable Spyderco design pedigree, but it’s also pricier. You’ll have to decide how much more you’re willing to pay for that pedigree – and again, if you are willing to pay for it, you may as well drop another $10 and grab a Delica, Endura, or Chaparral FRN.

A truth is that we, the consumers, don’t really get to know what goes on to get a knife made. We can guess, but until companies become more transparent that guessing will remain a fantasy, not particularly helpful. But I will say that it’s a shame the Polestar isn’t cheaper. Alongside its little brother the Alycone it could have been a real highlight, a great design and value. But with that awkward price I can only unreservedly recommend it if you aren’t interested in the Chaparral FRN, Endura, Delica, Cutjack, the RAT 1 or 2, the Skyline, or virtually anything in Real Steel’s lineup.

Sale

Spyderco Polestar Value Folding Utility Knife with 3.33" CTS BD1 Stainless Steel Blade and Durable Gray G-10 Handle - PlainEdge - C220GPGY

A Value Folder: Spyderco offers a unique breed of knives that truly live up to their name. They are perfect for novice knife buyers and as gifts for those you might want to "convert" into knife enthusiasts.
Superior Blade Steel: The heart of the Polestar is its full-flat-ground 3.33" blade, which is precision machined from American-made CTS BD1 Stainless Steel.
A Secure Grip: It has a gray scaled G-10 handle with a unique non-slip checked texture. Comfort in hand means easier use long-term.
Easy-to-Use: Its leaf-shaped profile includes a long, exceptionally capable PlainEdge working edge and a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening.
Pocket-Friendly: The Polestar includes a Walker Linerlock and a 4-way pocket clip lets the folder be set in a variety of carry and draw positions: Tip-up/tip-down left-hand/right-hand.

I recommend purchasing the Spyderco Polestar at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel 4-Max Review

by Dan Jackson 8 Comments

This is a knife that requires little in the way of an introduction. The Cold Steel 4-Max is arguably the most overbuilt hard use folding knife of all time. Modeled after designer Andrew Demko’s custom 4-Max folder the 4-Max brings Andrew’s clean design and attention to detail to life.

Buy the 4-Max at BladeHQ

Buy on Amazon

This isn’t your garden variety Cold Steel offering. Built in the USA and retailing for about $400, this high end production offering is for those that want to get as close to an Andrew Demko custom as they can without buying and actual AD custom. I’ve wanted to check one of these knives out ever since they announced the project in 2014. 4 years later and I finally have one in hand.

Will the knife survive the hype? Read on to find out.

General Dimensions and Blade Details

The 4-Max has an overall length of 10.00″, a 4.00″ blade and weighs 10.2 ounces. This is a big honking knife. As you will be able to see in the size comparisons, if the Ultimate Hunter is a great white, then this 4Max is a megalodon. It dwarfs normal folding knives. It’s almost a caricature of a folding knife. It’s massive in every way. Some may view a knife this big as novelty item rather than an EDC. Personally, I like mine for trips to the supermaket and high stakes hostage negotiations.

My 4-Max is made in the USA, but Cold Steel has moved manufacturing over to Italy. They changed the G-10 from the tan shown here to a blue grey on the Italian version. Personally, part of the allure of the 4Max to me was that it was made in the USA. It’s a knife so ridiculous that it almost needs to be made in the USA. Otherwise it’s just an imposter. That said, my research shows the Italian 4Max is very nice, and possibly even a smidge better than this USA version in the fit and finish department.

The blade on this sucker is massive. It’s a simple drop point with a deep belly, high flat grind, and decorative swedge. The grinds are crisp and even. The edge has been evenly applied, although the sharpener did run up onto the choil a little. That seems to be consistent from knife to knife. I’m not a fan of how that looks, and is one of my gripes.

You would think a knife this overbuilt would be a poor slicer, but the 4-Max actually has great blade geometry. It slices beautifully thanks to the high flat grind that gets surprisingly thin behind the edge. I can slice apples like nobody’s business with the 4Max. The tip also displays a good balance between strength and practicality. It’s stout, but isn’t a pry bar either. The knife is fully functional and surprisingly good at performing day to day tasks.

For blade steel Cold Steel went with CPM-20CV. CPM-20CV is Crucible’s answer to Boeller M390. It’s excellent stuff providing a covetable blend of edge retention, ease of sharpness, corrosion resistance and toughness. It’s a high end steel. So far it has done everything I’ve asked it to. Admittedly that has mostly been EDC chores including breaking down boxes, cutting fruit, and opening mail. I’m keeping this knife for long term evaluation and will update this section periodically.

Handle, Ergonomics, and Pocket Clip

The Handle of the 4-Max is G-10 over titanium liners with a titanium backspacer. Handle construction is solid. The G-10 scales have been nicely finished. All the parts line up, and the overall impression is solid.

So far the tan G-10 has held up well. I’m not a huge fan of light colored G-10 as it tends to pick up dirt and stain, but I haven’t had that issue with the 4-Max.

The ergonomics of the 4-Max are excellent. This is a huge knife, so there is plenty of real estate, and Andrew Demko is well known for his simple and ergonomic designs that accommodate a variety of grips and hand sizes. The ergonomic features include a generous forward finger choil, lightly textured G-10 handle scales, and a short run of toothy jimping. The jimping is nice because it captures the pad of your thumb without being overly aggressive.

All the edges of the G-10 have been chamferred. I haven’t noticed any hot spots. The balance point of the knife is an inch or so behind the pivot, so it has a forward heavy feel. It all but begs to be chopped with, an odd sensation from a folding knife. The pommel is large and angular and could be used as an “impact tool” if the need ever arised. The 4-Max is also comfortable in a reverse grip.

Time to talk about the pocket clip. This is a large titanium pocket clip. It allows for right or left side tip up carry only. It’s not a deep carry clip, but it’s oriented so that the knife buries fairly deep in the pocket. Spring retention is excellent.

In practice, this knife carries as you would expect. You need to wear a belt while EDCing the 4-Max, lest you wish to arrive at your destination in just your underwear. It’s big, it’s heavy, and it takes up a ton of space in your pocket. I wouldn’t turn up my nose at a belt sheath for this one.

Deployment and Lockup

The 4-Max makes use of large ambidextrous thumb studs. Quite a bit of travel is required to pop this blade open. Thankfully the going is smooth due to the massive phosphor bronze washers. When you finally maneuver the blade into the open position you are greeted with a hugely satisfying “click”. It’s kind of like closing the door of a German car.

Here is a size comparison with the Cold Steel Ultimate Hunter, a large knife in its own right.

For lockup we have an oversized Tri-Ad lock. It’s got a stop pin bigger than most pivots. Lockup is absolutely bank vault solid. Not a smidge of play here, and according to Cold Steel this lock can handle ungodly amounts of punishment. No complaints with respect to the lock.

Where I do have a complaint is when it’s time to unlock the knife. Tri-Ad locks can have a reputation for being tough to disengage, but this 4-Max takes it to a new level. Not only is a good amount of pressure required to release the blade (understandable), you have to position your thumb dead center on the lock release. If you travel too far forward or back, you won’t have sufficient travel for the lockbar to raise enough to disengage.

Once you get the lock disengaged extreme care needs to be taken with this blade. The spring tension turns the 4-Max into a guillotine of sorts. Care always needs to be exercised when closing a folding knife, but extreme care should be taken with the 4-Max. The combination of strong spring, heavy blade, and razor sharp blade make this one a little disconcerting to use. I’ve never felt nervous closing a pocket knife before, but after catching the edge of my ring finger in this blade I have a new level of respect for the 4-Max. Be careful.

Here is another size comparison with the hugely popular Spyderco Paramilitary 2:

Blade centering is good, but not great on my knife. It’s a mm or so off. No where near rubbing, but at this price point I would obviously prefer something dead centered.

Cold Steel 4-Max Review – Final Thoughts

The 4-Max is the closest most of us will come to ever owning an Andrew Demko custom knife. It was built without compromise, and in that respect the 4-Max is a roaring success. If you are looking for the biggest, baddest hard use folding knife on the planet then I think the 4-Max should be at the top of your short list. It’s beautifully made, and it cuts surprisingly well. And I challenge you to find a more solid folding knife.

My biggest gripe is it’s a tough lock to disengage. Not only is there a lot of spring tension, you have to place your thumb right in the center in order to successfully disengage the lock.

However, if you are looking for anything resembling a practical pocket knife for urban EDC then I think you should look elsewhere. This knife is huge and heavy. No way I would want to carry it around on a daily basis. But it’s a beautiful and unique piece and I appreciate it for what it is.

With the 4-Max, you are either going to love the idea of it or hate it. If you are somehow on the fence about the 4-Max I would suggest picking one up. It’s not cheap, but you get what you pay for.

Cold Steel 4 Max Folding Knife

CPM-20CV Steel
Pocket / Belt Clip

I recommend purchasing the Cold Steel 4-Max at BladeHQ or Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Rike Thor4s Review

by Grayson Parker Leave a Comment

Rike doesn’t enjoy the same name recognition that Reate, Kizer, or WE Knives does. While those companies are easily recognizable as the leading names in the renaissance of Chinese knife manufacturing, Rike is often left out of the conversation. On one hand, that’s perfectly understandable: unlike Kizer, WE, or Reate, Rike hasn’t cultivated much cachet with trendy designers, relying instead on in-house designs. At the same time, they have the same reputation for quality as the others, and an aesthetic all their own besides.

Buy the Rike Thor4s at BladeHQ

To be perfectly honest, I never thought that Rike would produce a knife that’d suit my tastes. Most of their offerings have blades nearly four inches long, which is utterly out of bounds for my line of work. When I saw the specs for the Thor4s, I nearly spit out my coffee. A reasonably sized integral? From Rike, no less? I was intrigued, and luckily, my girlfriend noticed and passed that information along to my family.

It should be noted that this was a Christmas present from my folks, and if ever there was a cause for bias, it’s the knowledge that your family might read every criticism you level at an earnestly given gift. I don’t think this has affected my judgment, but all the same, it’s something you should know.

General Dimensions and Blade Details

The Rike Thor4s is among the smallest knives in my collection, with a blade length of 2.375”, a handle length of 3.125”, an overall length of 5.5”, and a weight of 2.08 oz. To be perfectly honest, I was caught off guard by just how small this knife is; to give you a sense a scale, the box is so small I mistook it for jewelry. The blade is short enough that it’s less than ideal on a picnic, but it’s more than long enough for standard office chores. It also bears mentioning that with a blade length less than 2.5”, it’s unlikely to spook any coworkers.

Despite Rike’s fascination with angles, they chose a simple drop point for the blade’s profile. Were it not for a few issues I’ll bring up momentarily, this would be the utilitarian ideal. Most of the spine’s thickness is brought to the tip, so there’s little concern of snapping the tip off, whether in a fall or a bit of prying. The belly is just wide enough to feed, say, the edge of an envelope into, but not so wide that it’ll slip out of a cardboard box you’re breaking down.

The grind on the Thor4s is immaculate. All the details are perfectly executed: the plunge lines are crisp, the swedge is even, and both the primary grind and cutting bevel are consistent and well finished. Unfortunately, the blade stock is thick enough that all that work at a grinder is functionally irrelevant. It cuts fine, don’t get me wrong, but it’s no slicer. That would normally be a deal breaker, but as mentioned above, it’s too short for most food prep anyway.

This is the first knife I’ve reviewed that has M390 steel, and truth be told I haven’t really put it through its paces. A knife this size is meant for intermittent office use, not breaking down a pallet of boxes. It’s held its edge without chipping or rolling, hasn’t rusted, and responds reasonably well to a loaded leather strop. The high satin polish has a remarkable rainbow sheen that undoubtedly helps with rust resistance.

Handle, Ergonomics, and Carry

Of course, the prime selling point of the Rike Thor4s is its integral handle. For the uninitiated, that means that the handle is milled from a single block of material, which in this case is titanium. It’s an expensive process with few (if any) practical upsides, and most of an integral’s appeal lies in its status as a feat of engineering. Rike’s design language carries this theme to its logical endpoint, as the over-machined aesthetic pushes the Thor4s into “pocketable sculpture” territory.

Overall, the ergonomics of the Thor4s are fine, with the exception of two distinct flaws. The first of those is the butt of the handle, which, as you can see, tapers down to a wide, flaired end that leaves a rather sharp point on either side of the handle. In turn, this generates a slight hotspot when the knife is opened, though not when it’s held normally during use. The second issue is the pocket clip. For what I can only guess are aesthetic reasons, the tip of the clip isn’t rounded, or even squared: instead, it ends in an angular point. Most of the time this isn’t a problem, but every so often it catches on the meat of my palm in an altogether unpleasant way.

Normally knives with questionable ergonomics are also unpleasant to carry, but such isn’t the case here. It’s lightweight, compact, and its ergonomic flaws are only noticeable in the hand. As much as I want to rail against milled pocket clips in general, the spring tension on the Thor4s is quite nice, neither fraying the lip of my pocket nor acting like a hook instead of a clip.

Deployment and Lock Up

The blade is deployed by a well-executed flipper. It’s definitely of the ‘pull’ variety: trying to push on the tab will only leave you with a bruised finger. Instead of washers, the pivot runs on caged bearings, which is to be expected at this price point. The detent is crisp, the action is smooth, and as far as deployment is concerned, there’s not a fault to be found.

Once deployed, the blade is held open by a titanium frame lock that features a stainless steel lock insert. There is no horizontal or vertical blade play, and the lock consistently engages around 30% of the blade tang. The decorative pivot collar also functions as an overtravel stop. This is exactly the list of features I want in an integral frame lock. By contrast, when I was working on the DPx Aculus review, I was always aware that if something happened to the lock, I’d be up a certain creek without a paddle.

Rike Thor 4 Review – Final Thoughts

Overall, the Thor4s is an intriguing – if imperfect – addition to the market. The blade stock is a bit chunky, and the ergonomics a bit pokey, but at heart the Thor4s is an office knife, and as such those two flaws are tolerable. Between the top notch manufacturing, high end materials, and the novelty of a sub-3” integral, there’s more than enough to redeem the design.

It’s difficult to find comparisons to the Thor4s. There are plenty of production integrals, but few at this price point, and none at this size. The Lionsteel SR-22 (when it debuts) will be the next smallest integral that I’m aware of, but even then it will be substantially larger than the Thor4s. If you’re in the market for reasonably sized integral, this is likely your only option.

Next up: the Steel Will Modus.

Editor: I recommend purchasing the Rike Thor4s at BladeHQ or Amazon.com. Thanks for reading!