• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

BladeReviews.com

Knife Reviews

Menu
  • Home
  • Reviews by Brand
    • Al Mar Knives
    • Benchmade Knives
    • Boker Knives
    • Buck Knives
    • Cold Steel Knives
    • Chris Reeve Knives
    • CRKT Knives
    • DPx Gear
    • Emerson Knives
    • ESEE Knives
    • Fällkniven Knives
    • Fantoni Knives
    • Gerber Knives
    • Great Eastern Cutlery
    • Hinderer Knives
    • Hogue Knives
    • Ka-Bar Knives
    • Kershaw Knives
    • Kizer Knives
    • LionSteel Knives
    • Mcusta Knives
    • Mora Knives of Sweden
    • Microtech Knives
    • Ontario Knives
    • Opinel Knives
    • Reate Knives
    • Rockstead Knives
    • Schrade Knives
    • Shirogorov Knives
    • Smith & Wesson Knives
    • SOG Knives
    • Spartan Blades
    • Spyderco Knives
    • Steel Will Knives
    • Strider Knives
    • Victorinox Knives
    • Viper Knives
    • Zero Tolerance Knives
    • Close
  • Reviews by Purpose
    • EDC Knife Reviews
    • Tactical Knife Reviews
    • Survival Knife Reviews
    • Hard Use Folding Knives
    • High End Pocket Knives
    • Gentleman’s Folders
    • Rescue Knives
    • Traditional Knives
    • USA Made EDC Knives
    • Close
  • Reviews by Class
    • Folding Knives
    • Fixed Blade Knives
    • Assisted Opening Knives
    • Automatic Knives
    • Machetes
    • Titanium Frame Lock Knives
    • Close
  • Best Of
    • The Best EDC Knives
    • Best Survival Knives
    • Best Tactical Knives
    • Best High Value Knives
    • Close
  • Gear Reviews
    • Flashlight Reviews
    • Multi-Tool Reviews
    • Watch Reviews
    • Knife Sharpener Reviews
    • Close
  • FAQs
    • Knife Care and Maintenance
    • Knife Dictionary
    • Knife Steels
    • Steel Composition
    • Interviews
    • Close
  • Contact
  • About
    • About
    • Privacy
    • Links
    • Close

framelock

Kizer Yorkie Review

by Dan Jackson 2 Comments

Ray Laconico designs some elegant knives. I like the clean lines, and the practicality of his pieces. I’m not alone, and over the past few years his work has taken off. Kizer was smart to collaborate with him, and the results so far have been excellent.

Kizer Yorkie
Buy the Kizer Yorkie at BladeHQ

Buy on Amazon

We previously reviewed the Intrepid, and the Gemini. He has gone on to collaborate with other companies, including Alliance Designs, where the focus appears to be on higher end collaborations. The Kizer Yorkie is more approachable. It retails for around $150, still a lot of money but a fraction of what the Alliance Designs pieces cost, yet it still has a timeless look and is made from premium materials.

All knives reviewed are bought with my own money unless stated otherwise. I bought this particular knife with my own money. I’ve mentioned this before, but it probably bears repeating as Kizer has provided us with a few knives to review in the past.

General Dimensions and Blade Details

The Yorkie has an overall length of 6.125″, a 2.5″ blade, weighs 2.93 ounces and is made in China. On it’s own it doesn’t give me the impression of being a smaller knife, but the Yorkie is a smaller knife and it compares more favorably to a Mini Griptilian or even a Dragonfly II than the Delica. Here is a size comparison so you can see for yourself:

Kizer Yorkie vs. Benchmade Griptilian and Spyderco Dragonfly II

Perhaps part of what gives the Yorkie the illusion of being larger than it actually is, is the clean, near continuous line from pommel to blade tip. Laconico manages to tease out both a lot of handle and blade with this design. That, combined with substantial full titanium handles, lend the Yorkie some substance. Also, in hand the Yorkie actually feels more substantial than the slightly bigger Mini Griptilian.

The blade is an exaggerated drop point. It’s almost hawkish in appearance, yet it is also close to being a spear point. The simplicity of the blade shape is further accentuated by the almost full flat grind. You can see the slightest bit of flat at the top connecting with the ricasso, but beyond that you have essentially a full flat grind. The blade finish is a fine stonewash. It is a clean and functional look that matches the rest of the design.

Kizer Yorkie

For blade steel we have S35VN. Standard fare for a knife like this. For the uninitiated, this is a higher end American steel developed by steel manufacturer Crucible in conjunction with Chris Reeve, and was formulated as a predecessor to S30V and developed specifically for cutlery.

It may not have the “Gee Whiz” factor of some of the more exotic steels, but I certainly welcome it on this knife. I have always appreciated S35VN as a practical choice for a daily carry knife, and think it was a good selection for the Yorkie. In practice, this blade takes a fine edge and is easy to maintain. I haven’t had much in the way of issues with rust or corrosion with S35VN either.

Kizer Yorkie Blade

The blade geometry on this knife is quite good, and will easily accomplish the typical EDC tasks you would expect a small knife like this to tackle. Packages and mail are no problem. Light food prep, including cleanly slicing apples, is no problem thanks in part to the wide blade and lean grind. The Yorkie is also capable of tougher tasks, and I’ve used it while working in the yard. In a pinch it can pass through a palm frond, or assist with opening a bags of mulch. All told the blade is well considered and should meet most people’s needs.

Handle and Ergonomics

The Yorkie’s handle is 2 slabs of solid titanium separated by the pivot and 2 stainless steel stand offs. The Yorkie revels in its simplicity, and can pull it off by being so well executed. For example, the pocket clip screws are flush with the inside of the handle. No ugly screws are poking out into the handle like you might find on lesser knives. Also, the handles have been given just the slightest amount of beveling. You might need to squint, but the handles are not perfectly flat. Instead, there is a slight almost imperceptible radius to the entire outside of the handle. It’s these kinds of little details that subtly elevate the Yorkie. The overall fit and finish is great.

Kizer Yorkie

The only contrast on the handle is the bright stainless hardware, and the only ornamentation is a single hole fixed dead center on the show side. Even that hole has been given careful attention; there isn’t a machining mark to be found. I don’t know why exactly it was placed on the handle, except for perhaps to provide a little visual interest. I’m not sure if it rises to the level of addition by subtraction, but it does provide a focal point at least.

Kizer Yorkie Ergonimics

For a smaller knife, I’d say the ergonomics are pretty good. It’s not the magic trick of the Dragonfly 2, but there is a good amount of usable space on this smaller handle. This is thanks in part to the simple design and the small forward finger choil created by the flipper tab. There is just enough room to get your index finger in.

If you rely on just the titanium handle I’d say its a 3.5 finger handle for me, and probably a cramped full 4 finger grip for most. However, that finger choil allows you to spread out and really get comfortable with the Yorkie. The thick titanium handle also helps, and gives you something to grab onto. There is no jimping or texturing to speak of, but the simple boxy handle offers enough traction on its own. At least for my pedestrian purposes.

The pocket clip is a small milled titanium clip. I’ve always enjoyed a well executed milled clip, and I’m pleased to say that spring retention on this clip is excellent. The knife easily slides into the pocket, but is also firmly held in place. It isn’t a deep carry clip, but the Yorkie is still fairly discrete.

Kizer Yorkie Pocket Clip

There is a groove milled into the pocket clip that blends in with the lock bar cut out. I haven’t seen this on a knife before. It’s kind of arbitrary, but like the hole in the handle, I think it was an attempt at injecting a little personality into the design. I don’t mind it, but I don’t fully “get” it either.

Here is your shot of the Yorkie in the pocket:

Kizer Yorkie in the Pocket

Deployment and Lockup

This is a small titanium framelock flipper. The flipper tab pokes out from the back of the handle prominently. I think that is good as it doesn’t have any texture on it. With a small knife like this, a poorly designed flipper tab runs the risk of the knife being fiddly. The Yorkie isn’t fiddly, but still, there is a little compromise with a small flipper like this. This isn’t the easiest knife to flip open. The detent is also good, but not great. I’d say it’s a “6” on a scale from 1-10. I’d prefer to see it more like a 7 or 8. It’s good but not great. The knife runs on caged bearings, and the action is smooth and easy.

Kizer Yorkie Spine

For lockup we have a titanium framelock with a stainless steel lockbar insert. Kizer knows how to make a framelock, and the Yorkie is no exception. The lockup is early and rock solid. Disengaging the lockbar is easy thanks to some substantial cutaways in the handle. No complaints with the lockup. My knife also came with a perfectly centered blade and a nice nylon and felt lined pouch.

Here is a parting size comparison with the Delica and Endura:

Kizer Yorkie vs. Spyderco Delica and Endura

Kizer Yorkie Review – Final Thoughts

Ray Laconico has built up significant momentum over the past few years. I think the Yorkie is another success for him. Kizer has managed to capture his “less is more” ethos, and to build a deceptively simple knife that is actually quite thoughtful and rich in detail. It is clear that everything has been well considered, and the knife not only looks cool, but it works quite well. Even as a smaller piece.

My main piece of constructive criticism regards the detent. I’d prefer a heavier action to help ensure the blade gets 100% open 100% of the time. Everything else is so neatly dialed in, so it’s odd that the detent isn’t a little crisper. Beside that I find little to complain about.

Even the price is reasonable. I paid around $135 for my knife. For some reason the price is now closer to $150. While that isn’t cheap, it’s not too bad for a titanium framelock flipper. The materials are top notch, the design is attractive, and the execution is almost perfect.

I would recommend the Yorkie if you are a fan of the design, or are looking for a smaller titanium framelock flipper for daily carry.

Sale
Kizer Folding Knife S35VN Blade Titanium Handles Pocket Knife Flipper Knife (2.57' Stonewash) Yorkie Ki3525 (Ki3525A1)
Kizer Folding Knife S35VN Blade Titanium Handles Pocket Knife Flipper Knife (2.57" Stonewash) Yorkie Ki3525 (Ki3525A1)
  • This knife Designed by Ray Laconico and precision engineered by Kizer
  • 2.5-inch CPM-S35VN blade features excellent toughness, edge retention and wear and corrosion resistance
  • Handle Material:6AL4V Titanium /Blade Material:CPM-S35VN /Weight:2.93 oz /Overall:6.125"
  • Great companion for any hiker, landscaper, backpacker, hunter, wilderness guide, electrician or anyone in need of a reliable everyday carry knife
  • Excellent everyday carry for numerous tasks including opening packages, stripping wire, removing splinters, cutting zip-ties,aggressive animal defense
$98.88
Buy on Amazon

I recommend purchasing the Kizer Yorkie at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: EDC Knives, Folding Knives, Kizer, Titanium Frame Lock Knives Tagged With: flipper, framelock, Ray Laconico, S35VN, titanium

Bestech Knives Malware Review

by John Burridge 3 Comments

Over the years, I’ve noticed that in polite society when I whip out a folding knife to open a box or cut a loose thread, most people’s reactions are some variation of “Oh God, why do you have/need/carry that?” My usual reply is that a knife is the most useful tool in the world, but I’ve found that no matter how “non-threatening” looking the knife is, I still get that same reaction. Therefore, why not carry whatever I want?

Bestech Malware
Buy the Bestech Malware at BladeHQ

So, a month ago I put down my already scary-looking Microtech Ultratech OTF switchblade and picked up the seriously murder-ey looking Bestech Malware.

The Malware was designed for Bestech Knives by Todd Knife and Tool. TKT was started in 2016 by prolific knife reviewer Teryl Todd (Zelrick42 on YouTube) and his brother Seth Todd. They went from being fans to designers, and have a thoroughly modern company. Teryl lives in Ozark, Missouri, and Seth lives in Houston, Texas. They jointly design their knives by sharing 3D CAD files online, then Seth makes physical prototypes that they both test. TKT have developed a distinct visual style also apparent in their We Knife Co. made Roxi folder, and in the many prototype images shared on the toddknifeandtool Instagram account.

Bestech Malware Review

General Dimensions & Blade Details

The Malware’s blade is 3.875” (9.8 cm) long, the blade stock thickness is 0.15” (3.9mm), and it’s full open length is 8.75” (22 cm). The long stabby blade folds into a titanium handle, the blade pivots on ball bearings, and it’s framelock has a steel lockbar insert. The steel lockbar insert is a theoretically replaceable part that protects the titanium framelock from rubbing against the lock face of the steel blade. My experience has been that often a titanium framelock rubbing against a steel blade tends to “stick” in place, but steel on steel doesn’t have the same problem.

Here is a size comparison with a large Sebenza Insingo:

Bestech Malware vs. CRK Large Sebenza

It weighs 3.68 oz. which is technically a little more than a Spyderco Paramilitary 2 or a Chris Reeve Knives large Sebenza, but it feels lighter than either of them in the hand. I attribute this feeling to the weight balance of this knife. If I’m holding the Malware in a normal thumb-on-top grip, and I slowly open my hand, the knife will not fall to the floor, but will stay balanced on my index finger. This nearly perfect weight distribution helps the Malware feel very agile in my hand.

The titanium pocket clip is configured as a right side, tip up only, but there are dedicated left handed versions as well. I have the “Ti Black” version. The titanium backspacer and pocket clip are anodized a brassy gold color, and contrast nicely against the black stonewashed finish of the rest of the knife. The stonewashed treatment gives the edges and corners a worn-in look similar to Kershaw Knives’ “blackwash” finish.

It’s blade steel is S35VN, which was developed specifically for high-end knife blades by steelmaker Crucible Industries and Chris Reeve Knives. It’s a powdered metal steel, which has the advantage of more uniform blending of it’s elements (iron, niobium, chromium, vanadium, etc.) than conventional steel. The end-user benefits of this manufacturing process and the S35VN formula are excellent blade toughness (it can take a hit without breaking or bending), corrosion resistance, and edge retention.

Bestech Malware Blade

So it’s a modern production knife made in China with premium materials and it’s priced accordingly at $196 on BladeHQ. What makes it different than every other new Kizer, Reate, We, and Rike knife? Style and details.

What I love about good pocketknives is that they’re pieces of functional art you can hold in your hand. The Malware is full of interesting details and I keep noticing more. The design is a strange futuristic combination of curves, straight lines, and, as on the cutting edge of the blade, straight lines that almost imperceptibly turn into curves. The blade has a finger choil which, although it’s a little too small for my index finger, is the full 3.9mm width of the blade stock, which is yet another design detail that I appreciate.

Handle, Ergonomics, & Pocket Clip

In pictures, the handle looks very thin, and in the days between ordering the Malware and receiving it, I wondered if it would be too small to properly wrap my medium-large-ish hands around. When it arrived, I found that it fills my hand very well, and the long, flat clip doesn’t create much of a hotspot any way I hold it.

Bestech Malware

Some edges are pretty squared off, like the machining on the backspacer, but almost every part of the handle that comes in contact with my hand is chamfered, making it quite comfortable to hold. And the more I have it in my hands, the more I keep discovering new functional design details that I had, at first glance, written off as being cosmetic- like the three holes in the show side near the flipper tab. Those holes are exactly where my right thumb needs traction when flipping the knife open.

Bestech Malware Backspacer

On the lock side of virtually all framelock knives, there’s a machined indentation in the frame that allows the locking part of the frame to flex inward and lock the blade open. A lot of knives cover this indentation with their pocket clips, but as yet another example of how well thought out this design is, the pocket clip on the Malware sits right above, but not covering, the indentation. So when gripping the knife to flip it open, my ring finger is naturally pushed into that square indentation, which gives me a secure grip when flipping it open.

Bestech Malware Ergonomics

I don’t ordinarily use my pocketknives for food prep, but in the spirit of thoroughness I sliced up some veggies with it. The blade has a full flat grind and gets very thin at the bottom, which made slicing easy. The ergonomics for general food prep were fine as long as I didn’t try to spread anything- the thin blade definitely doesn’t work as a butter knife. The flipper tab extends below the cutting edge, so it can’t really be used for dicing either, but kitchen work is clearly not this knife’s intended use.

Bestech Malware Pocket Clip

The pocket clip is rather long and thin and has more flex to it than any other milled clip I’ve handled. The good news is that it doesn’t chew up my (already chewed up) pants pockets, but the bad news is that it seems like it could easily get bent.

I carried this knife during a T.C.C.C. medic class, and when we were learning how to improvise tourniquets, I used the Malware as a windlass (the stiff piece that you twist to tighten the tourniquet.) Despite really cranking this thing down tight on my training partner’s arm, I had no fear of the knife breaking or bending until the instructor decided to show the class how to tie off the end of the improvised tourniquet using the pocket clip. He was bending the clip way out and jamming fabric under it, and I desperately wanted to ask him to stop so he didn’t break it. I resisted this urge because I didn’t want to seem like a weenie to our super-badass Los Angeles SWAT Medic instructor. So he manhandled the clip, and when he was done, it just sprung back to it’s normal state. It may be thin and flexible, but it’s not fragile.

Bestech Malware in the Pocket

Overall, the Malware isn’t an “overbuilt” knife like a Hinderer Knives XM or a Strider SMF, but it’s definitely tougher than it looks.

Deployment & Lockup

A gripe I have with every single framelock flipper is if I grip it in such a way that I’m putting a lot of pressure with my middle finger on the front of the lock near the pivot, then the knife becomes very difficult to flip open. The worst offender on this front that I have is a Brad Zinker midtech version of the Boker Urban Trapper. The only knife I have that is immune to this problem is my GiantMouse GM1, which is an awesome knife overall, but perhaps solves this problem by having a weak detent which makes it difficult to flip open. However, the ergonomics of the Malware naturally place my fingers where they don’t get in the way of the mechanism at all.

Bestech Malware Lockup

The Malware’s flipper tab is relatively small but has comfortably rounded jimping that provides good traction for flipping. The amount of detent tension that has to be overcome to flip the knife open is tough for me to objectively define- but subjectively, I think it flips perfectly. The Malware’s framelock engages at about 40%, which you can jam over to about 60% if you’re worried about it slipping (not that that’s ever happened to me or anyone I know.)

Bestech Malware vs. Protech Ultratech

I don’t carry a knife specifically for self defense, but I must say that I certainly never felt under-prepared while carrying the Malware on the weird streets of Los Angeles. It’s never accidentally opened while in my pocket or while drawing it out of my pocket. It’s flipped and locked open securely every single time I’ve flipped it. I don’t think an especially scary-looking knife like this is going to make a bad man run away in terror, but it’s a long, mean looking blade with a big handle I can get a very firm grip on. So I’ll add self defense to the Malware’s growing list of positive attributes.

Bestech Malware Review – Final Thoughts

I carried the Malware every day for a month and primarily used it for un-challenging tasks like opening packages, slashing open bags of cat food, and as an improvised medical device. At the end of the month, the finish on blade, handle, and clip are unblemished. The S35VN blade was still very sharp in most places, but after a quick, ham-fisted touch up on a Wicked Edge sharpener, it’s back to 100%. There’s no sharpening choil, but I don’t really care if the last few millimeters of my blade are super sharp.

What is the Bestech Malware made to do? I don’t want to sound like a knife snob a-hole, but I tend to compare everything to my Chris Reeve Knives Sebenza 21. The word “Sebenza” is literally the Zulu word for “work”, and the Sebenza feels like an indestructible precision tool. The Bestech knife doesn’t feel like a tool, it feels like a blatantly offensive weapon that can also open boxes from Amazon. Malware is the perfect name for this knife because it’s so badass. Not flaming skull badass, but sci-fi villain badass. It brings to mind futuristic heavy metal music by the band Voivod, it’s like the knife version of the Space Marines’ rifle from the movie Aliens, it should be a weapon in the DOOM video games, and I obviously really like it.

The deciding factor for anyone considering buying the Malware is definitely it’s looks- if you immediately like it’s vibe, I say get it. Nothing is perfect (except kittens), but the Malware excelled at everything I wanted it to do, and looked super-murder-ey doing it. Recommended!

Bestech Malware on BladeHQ
Bestech Knives Malware – From $196.00
From: BladeHQ

Editor: I recommend purchasing the Bestech Knives Malware at BladeHQ and Amazon. Thank you very much.

About the Author: This guest review was written by John Burridge. John lives in Los Angeles and has a deep passion for knives. I plan on adding to this section to include more info about John and where to find him. In the meantime, I hope you enjoyed this in depth review.

Filed Under: Folding Knives, Tactical Knives, Titanium Frame Lock Knives Tagged With: flipper, framelock, Made in China, S35VN, titanium

Spyderco Spydiechef Review

by Josh Wussow 3 Comments

I didn’t get it. After tearing open the box and turning the knife over in my hand, I simply didn’t get it. Flat colors. Slow deployment. Boring construction. This is the legendary Spydiechef? It’s a weird-shaped blade sandwiched between two pieces of gray titanium, with a retail price of $215. What manner of magic has bewitched my fellow knife lovers?

Spyderco Spydiechef
Buy the Spyderco Spydiechef at BladeHQ

And yet, I seem to land smack in the middle of the Spydiechef’s target market: Knife guys (check) who care deeply about edge retention and rust resistance (double check) and encounter a variety of daily cutting tasks (indeed) while also cooking on the go with some degree of regularity (bingo).

Spyderco Spydiechef Cutting Onions

Designed by the legendary Marcin Slysz and manufactured by Spyderco’s wizards in Taiwan, this knife should be right up my alley. And, while it may not have been love at first sight, the Spydiechef spent the last few weeks working its way to the head of the table.

General Dimensions and Blade Details

Dimensionally, there’s nothing too special here. You’re looking at a 3.32-inch blade, with a thickness of just under 0.12-inches. The handle/closed length is a middling-sized 4.46-inches, stretching the overall number to 7.78. Weight is low (3.8-ounces), thanks to the Chef’s flow-through titanium chassis. You’ve got the standard Spyderco wire clip, which can be mounted on either of the side slabs. Boring bronze washers, a snooze-inducing frame lock, and *yawn* a lanyard hole.

Here is a size comparison with the Spyderco Shaman:

Spyderco Spydiechef vs. Spyderco Shaman

But, it’s not the specs that make the Spydiechef such an excellent knife. It’s those delicious details that will bring one into my permanent collection.

Let’s start with the blade. Its LC200N steel has been formed with some sort of metallurgical witchcraft. While we’ve seen “rust-proof” steels before, such as H1 on Spyderco’s Salt line, this stuff is a whole new animal.

Spyderco Spydiechef Blade

Here’s what the maker has to say about LC200N: “This state-of-the-art nitrogen-based alloy is extremely corrosion resistant and is actually used by NASA for the ball bearings used in aerospace applications.” Sounds great, but ball bearings aren’t known for holding an edge.

This is where Youtubers like Pete from Cedric & Ada come into play. His barrage of edge-retention and corrosion tests has established LC200N as one of the premier steels for EDC tools. While I didn’t subject the Chef to these sorts of extreme conditions, I can confirm that it showed no sign of rust after multiple cooking sessions. I’ve used this knife almost every day since it arrived, and the edge has yet to dull or dim.

Spyderco Spydiechef on a Fire Hydrant

The Chef’s blade shares two traits with many of my favorite cooks – It’s friendly to strangers, and it’s all belly. Despite its 3-plus inches of shiny steel, the graceful curve of Slysz’s design is easy for even the more paranoid to stomach. And, thanks to its flat grind and Nick Shabazz sharpening job, it’s been a slicer since day one.

Spyderco Spydiechef in the Kitchen

Handle, Ergonomics, and Pocket Clip

The Spydiechef’s handle is gray, like the color of boiled meat or the hair of an overworked cook. This titanium blandness was at least partially responsible for the knife’s poor first impression. But, once I got it in the hand, the subtlety of Slysz’s design became immediately apparent.

Take a look at my hand position:

Spyderco Spydiechef Egonomics

Beyond its ergonomic excellence, the curve of the Chef’s titanium handle offers a significant advantage in the kitchen. It keeps the edge (mostly) below my knuckles, greatly easing the slicing and chopping process. Not as much as a dedicated kitchen knife, sure, but more so than any other folder I’ve handled.

Spyderco Spydiechef Closed

The pocket clip offers another bit of subdued excellence. On the surface, it appears to be just another iteration of the classic wire clip. But take a look at that angle. It allows the knife to curve down and into the back of the pocket, keeping it out of the way of whatever else you may be carrying.

Spyderco Spydiechef Pocket Clip

There are a few caveats here. While the reversible clip makes this technically an “ambidextrous” knife, the placement of the lock bar in relation to the Spydie-hole will make one-hand opening a challenge for lefties. And, though it’s technically stainless, the titanium handles do pick up smudges and snail trails. Neither of these is terribly troubling to me, though. I’m more than pleased with the Chef’s ergonomics, both in the hand and in the pocket.

Deployment and Lockup

As evolutionary as the rest of the Chef may be, the knife’s deployment and lockup are as basic as bacon and eggs. Not to say that chicken ovum and cured pork aren’t delicious (they are), but there’s a skill to handling even the most humble of ingredients. The combination of Spydie-hole and bronze washers is classic – Never flashy, but accessible and delicious. It’s a no-fuss, low maintenance setup for those who use their knives rather than playing with them.

Spyderco Spydiechef with Pine Straw

If there’s one complaint I have with the Chef, it’s the closing action. Have you ever worked in a restaurant? The closing shift almost invariably sucks. Same goes for the Spydiechef. You have to nudge the blade up and over its detent, which requires applying force to the blade while your thumb is still in the slicing path. Exert too much pressure, and it could theoretically pop down and filet your knuckle. Now, I haven’t had this happen. The detent is soft enough that a gentle push will pop it over the ceramic ball. But, it’s definitely something that requires some fine motor skills.

Spyderco Spydiechef Making Tacos

Spyderco Spydiechef Review – Final Thoughts

This is a knife that’s put my collection in crisis. Between the Spydiechef, the FRN Chaparral, and the Kershaw Atmos, the other folders in my case aren’t getting much pocket time. The Native 5 has subbed in for a day or two, but the Kizer Begleiter, Steel Will Cutjack, and even my ZT0562 have been unable to crack the rotation.

This knife is so damned good that it’s dampened my enthusiasm for other knives. And honestly, I think I’m okay with that. This is a tool I feel good carrying, using and, in the near future, owning. It’s the Chaparral all over again – Nick Shabazz loans me a knife, and I wind up buying one. Thanks again, Nick, and a hearty “Well done” to Marcin Slysz and Spyderco.

Spyderco Spydiechef Premium Chef Knife with 3.32' LC200N Ultra-Corrosion-Resistant Steel Blade and Titanium Handle - PlainEdge - C211TIP
Spyderco Spydiechef Premium Chef Knife with 3.32" LC200N Ultra-Corrosion-Resistant Steel Blade and Titanium Handle - PlainEdge - C211TIP
  • One of a Kind -The Spydiechef is an extremely refined folding knife that takes the user-friendly Ergonomics and balance of a world-class chef
  • Ultra Corrosion Resistant - It features a gracefully curved blade crafted from LC200N. This state-of-the-art nitrogen-based alloy is extremely corrosion resistant and is actually used by NASA for the ball bearings used in aerospace applications
  • Reliable High Performance - It offers an extreme cutting performance in a package that is immune to even the harshest environments
  • Versatile - For additional security when working around water, the handle also includes a lined lanyard hole for easy attachment of safety lines and lanyards
  • Ergonomic - To reduce weight, optimize balance, and simplify cleaning, the Spydiechef features an open-backed handle constructed with two precision-machined solid titanium scales
$269.15
Buy on Amazon

Editor: I recommend purchasing the Spyderco Spydiechef at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: EDC Knives, Folding Knives, Spyderco Tagged With: framelock, LC200N, made in Taiwan, Marcin Slysz, titanium

Zero Tolerance 0609 Review

by Dan Jackson 11 Comments

This is a reader request. Proof that if you twist my arm hard enough I’ll review the latest full titanium Zero Tolerance flipper. Only for you guys.

Zero Tolerance 0609 Review
Buy the Zero Tolerance 0609 at BladeHQ

Buy on Amazon

The Zero Tolerance 0609 is an R.J. Martin design, and is another step in ZT’s trend of releasing smaller, more EDC friendly knives. The last R.J. Martin / ZT collab I handled was the 0600, a massive, 9.5″ framelock flipper. It was big and beautiful piece, but few people are going to want to carry a folding knife with a 4.25″ blade on a regular basis. Plus it was a $400 limited edition knife.

The 0609 is much more reasonable in its footprint, price point, and availability. When you consider that I reviewed pieces like the 0300 and 0560 only a handful of years ago, it shows how the market has evolved. Big chunky knives are losing favor to more pocket friendly offerings. Lets take a deep dive into this recent release from Zero Tolerance.

General Dimensions and Blade Details

The 0609 has an overall length of 7.4″, a 3.4″ blade, weighs 3.3 ounces, and is made in the USA. This is a good size knife, but you may be surprised to learn that the 0609 is both smaller and lighter than a Benchmade Griptilian. I think this is a great size for those wanting a full size knife, but still something thin, lightweight, and special.

Zero Tolerance 0609 vs. Benchmade Griptilian

The blade is a twist on R.J.’s classic drop point, found on models from his Q36 customs, to the Kershaw Volt. This particular blade has been given a harpoon and swedge, lending a more exotic, technical look to the knife.

Zero Tolerance 0609

Blade stock is thin, clocking in at .12″ (just over 3mm thick), and the high flat grind combined with a wide edge makes for a knife that slices well right out of the box. I had no problem slicing apples, and the knife absolutely decimates cardboard.

Blade steel is CPM-20CV, which is chemically similar to M390, but made in the USA by Crucible. Edge retention has been excellent and there are no signs of chipping or rolling. No issues with rust or corrosion either.

Zero Tolerance 0609 Blade

The knife has served well in its role as a high end EDC or “gentleman’s tactical” folding knife. It’s a knife that has been built for speed. I can’t help analogizing it to a sports car. It’s low-slung and has a premium feel.

Handle, Ergonomics, and Pocket Clip

The 0609’s handle is comprised of two heavily milled pieces of bronze anodized titanium. The anodization is interesting, as the bronze picks up hues of blue and purple from the oils on your skin. I think it’s a nice change of pace over standard raw titanium, but wonder how it will wear over time.

Zero Tolerance 0609 Handle

Handle construction is simple and clean. You have two simple handle pillars, and then you have the oversized See-Through Pivot (STP). The STP is an R.J. Martin creation that allows you to see through the pivot. It’s cool and different, but the draw back is you need to buy a special tool from KAI to adjust the pivot or take apart the knife. That’s a definite drawback to an otherwise practical offering from ZT. Still, the STP is one of the more interesting details of the knife.

Zero Tolerance 0609 Ergonomics

The ergonomics of the 0609 are pretty good. The handle is long enough to accommodate a full 4 finger grip, while the textured titanium, jimped thumb ramp and spine, and finger grooves all serve to lock your hand in place. The only rub is that this knife is 1.125″ at its widest. Its very thin, making it great for carry, but less comfortable for extended use. Personally, I’m fine with sacrificing a little ergonomic comfort for a lighter and more streamlined knife, but if you are expecting this to fill the hand like an 0808, well, it won’t.

For carry the 0609 comes with a simple inoffensive pocket clip. Even the Zero Tolerance logo has been dialed back on the clip of this knife. Gone are the days of the big “ZT” billboard. Now we have “Zero Tolerance” lettered in a small and spare font. The clip offers good retention and the knife rides relatively deep in the pocket. The handle has been drilled and tapped for ambidextrous tip up carry.

Zero Tolerance 0609 Pocket Clip

In practice the 0609 carries great. It’s slim, and lightweight. You will quickly forget that you are even carrying it. The sturdy pocket clip keeps the knife firmly in place. Perhaps a deep carry clip would have been nice, but this clip is small and stays out of the way.

Deployment and Lockup

Like most ZTs, this is a titanium framelock flipper. And once again, Zero Tolerance demonstrates that they know how to put a titanium framelock flipper together. The flipper tab is prominent and lightly jimped. The blade pops open easily with either a push button or lightswitch flick. The detent is strong, and the blade rides smoothly on Kershaw’s KVT caged bearing system.

Zero Tolerance 0609 Review

For lockup we have a titanium framelock with stainless steel lockbar insert. Lockup is early and secure. There is no play in any direction and the lockbar disengages easily without any stick. I often consider Zero Tolerance to be the best in the business when it comes to production titanium framelock flippers. The 0609 is another example of why that’s the case.

Here is a shot next to my ZT O450CF. It’s actually not much bigger than the 0450CF. Mostly it’s a wider knife than the 0450CF.

Zero Tolerance 0609 vs. Zero Tolerance 0450CF

Blade centering is perfect on my knife.

Zero Tolerance 0609 Review – Final Thoughts

I think this is the most refined non-limited production ZT I have handled to date. Clearly they have listened to customer feedback, and this strikes me as an evolution of the Zero Tolerance lineup. Some people may want big chunky folding knives, but there are plenty of us who want something thin and light.

While the brand has been obviously trending towards more practical knives over the years, this 0609 strikes me as the total package. A slick R.J. Martin design, a thinly ground blade married to a lightweight and strong titanium handle, with great flipping action and solid lockup. What’s not to like? The answer is “not much”. It’s a great knife.

Even the price is reasonable. These retail for a little over $200. Not cheap by any stretch, but not unreasonable for a USA made premium pocket knife either. This is easily my favorite regular production Zero Tolerance folder to date. Highly recommended.

Zero Tolerance 0609 Pocketknife; 3.4-inch CPM 20CV Drop Point Blade with Two-Toned Finish; 3D Textured Titanium Handle, Anodized Bronze; KVT Ball Bearing Manual Open; Reversible Pocketclip; 3.3 oz
Zero Tolerance 0609 Pocketknife; 3.4-inch CPM 20CV Drop Point Blade with Two-Toned Finish; 3D Textured Titanium Handle, Anodized Bronze; KVT Ball Bearing Manual Open; Reversible Pocketclip; 3.3 oz
  • CPM 20CV premium powdered steel selected for hard use; produced by Crucible with high volume vanadium carbides and highest level chromium to ensure blade’s polish, exceptional durability and longevity
  • Lightweight and razor sharp, 0609 measures 4. 25 inches closed, 7. 4 inches open; it boasts a titanium frame lock with angled lock bar for secure, reliable lockup that prevents unintentional closing
  • A perfect EDC, the multi-faceted 0609 can aid in self- and home-defense, emergencies, meal prep, wilderness survival, job site maintenance, daily chores, recreational activities and military maneuvers
  • Ultimate knife is memorable gift for a spouse, co-worker, close friend, graduate, parent, first responder, relative embarking on special journey, bride or groom, generous host or extraordinary retiree
  • ZT knives are designed for heavy-duty use and to provide maximum strength and versatility; they are domestically produced and against manufacturing defects in material and construction
Buy on Amazon

I recommend purchasing the Zero Tolerance 0609 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: EDC Knives, Folding Knives, Titanium Frame Lock Knives, Zero Tolerance Tagged With: bearings, CPM-20CV, flipper, framelock, R.J. Martin, titanium

Kizer Sheepdog Review

by Dan Jackson 6 Comments

Imagine you can pick out anything from Kizer‘s lineup. I was recently put in that position. Not a bad place to be. Thumbing through their catalog yields all sorts of stuff from the pedestrian to the outlandish. The Sheepdog is more in that second camp. It’s a big bold design. Not likely to dislodge something like the FRN Chaparral from your pocket, but definitely a conversation piece.

Kizer Sheepdog Review
Buy the Kizer Sheepdog at BladeHQ

The Sheepdog is a design from Chris Conway of Sheepdog Knives, and is the production version of Conway’s C01C custom knife. The Sheepdog even has “C01C” laser engraved on the blade. It’s a big and chunky offering for fans of big and chunky knives. Clearly this one won’t be for everyone, but the unique design and loyal following piqued my interest.

This knife was provided to me free of charge from Kizer. All thoughts are my own.

General Dimensions and Blade Details

The Sheepdog has an overall length of 7.75″, a 3.125″ blade, and it weighs 6.17 ounces. Right now I have the open knife resting on my chest as I type this review out on my couch. The resulting sensation is what I would expect the early onset of a heart attack to feel like. It’s a heavy pressing weight, bearing down on my solar plexus. I better move this review along before my girlfriend has to call 911.

Kizer Sheepdog

While the Sheepdog is categorized as an EDC knife, you will need to be a fan of BBKs (Big Beautiful Knives) to tote this one around.

For those seeking something smaller, Kizer wisely decided to introduce the Kizer Mini Sheepdog a while back. As part of the Vanguard series, the Mini Sheepdog comes with G10 scales and a liner lock, but it also clocks in at a mere 3.25 ounces. I received a Mini Sheepdog from Kizer as well, but stupidly forgot to take a size comparison photo before sending the Mini over to Grayson for review. I liked the size and weight of the Mini Sheepdog and could see that making for an interesting daily carry tool.

The Sheepdog’s blade is a massive slab of S35VN stainless steel. It’s a modified sheepsfoot, with a gently curving edge, high flat grind, and dual swedges. Sheepsfoot knives generally don’t have a penetrating tip, but the Sheepdog’s leading edge is canted out slightly, resulting in a strong tip that won’t pick out splinters, but could easily blow through a hollow core door.

Kizer Sheepdog Blade

The blade has been nicely made. The grind lines are crisp, the edge is clean and even, and the finish is a fine stonewash. No complaints.

Given this blade is a hair over 4mm thick, I was dubious of the Sheepdog’s cutting abilities. But much like an NFL linebacker, this big boy has some moves. I started with an apple, as apples are a great test of the slicing ability of a pocket knife. A slicey knife will cut the apple cleanly, while a chunky blade will plow through it, leaving a series of fault lines in your apple slices.

Kizer Sheepdog Flow Through

Much to my surprise the Sheepdog cut the apple cleanly. It’s like a small butchers cleaver.

I moved on to cardboard. No problems there either. The S35VN blade peeled through the cardboard boxes. It eventually slowed down as the edge dulled, but the edge geometry is good and the knife cuts well. After the boxes, I touched the Sheepdog up on the ceramic rods from my Sharpmaker and we were back in business. At that point I carried the knife with me. Mostly on the weekends when I could carry a big blade like this. It performed regular EDC tasks, including opening mail and packages containing other knives, without any issue.

Handle, Ergonomics, and Pocket Clip

Handle construction is simple and elegant. At the front of the knife you have an oversized pivot with an anodized blue titanium pivot collar. Towards the butt of the handle are two stainless steel standoffs. A series of three slots have been milled into the show side, offering a little extra traction and a view inside. Not much to see except for an expanse of dully shining titanium when the knife is open, or the glinting stainless steel blade when the knife is closed.

Kizer Sheepdog Handle

There is something oddly cathartic to the handle of this knife. It’s a hefty piece of contoured and bead blasted titanium, and it reminds me of palming a well worn river rock.

While the Sheepdog doesn’t have much of a “traction plan” with respect to aggressive texturing or jimping, the knife has clearly been built for comfort. Your hand naturally wraps around the handle, fingers finding the grooves, and thumb sliding across the broad spine of the blade. The result is a secure and confident grip without hot spots or ergonomic issues. I had no problems using my knife during the testing period. Granted I didn’t try to break down a yak with it, but for normal utility tasks the knife worked fine. I suppose you could always slap some skateboard tape on it, dudes.

Kizer Sheepdog Ergonomics

The pocket clip is not without its controversy. First of all, it’s a milled titanium clip, so by default it’s going to raise the ire of a percentage of our knife loving brethren. I’m talking about those who have sworn their swords against the recent rebel uprising of milled pocket clips. Those folks will forever condemn the Sheepdog with its milled clip as a glorified paperweight, unfit for daily carry.

I’m a little less dogmatic when it comes to this sort of thing. Yeah, I’ve handled some knives with milled clips that didn’t work, but the one on this Sheepdog isn’t bad. It has been designed in a way to produce a lot of spring tension. Spring tension is critical for the success of any pocket clip, as this is what keeps the knife in your pocket.

The pocket clip works fine. I mostly wear lightweight shorts with a triangular pocket, and like to keep my knives high in the pocket up near my belt. Nothing upsets me more than a loose clip that allows my EDC knife to constantly sink towards the bottom of my pocket. That is the worst. Thankfully we don’t need to worry about that here. The Sheepdog’s pocket clip defies gravity and keeps my knife where I want it. No small feat given how heavy this thing is. Job well done, Kizer.

Kizer Sheepdog Pocket Clip

Ultimately, the Sheepdog carries well for what it is, but this is still a 6 ounce+ pocket knife. It isn’t a Dragonfly. You are going to notice it. It may even pull your pants down if you forget to wear a belt.

Deployment and Lockup

The Sheepdog makes use of an oversized flipper tab to get the blade open. The flipper is a substantial piece of steel allowing the user to pop the blade open with a lightswitch stroke. The detent is dialed in, and the blade runs on caged washers. The end result is a knife with reliable and satisfying flipping action. I’d put it at a solid “7” on the 1-10 scale. It gets the job done, but this is still a big heavy blade, and you feel that in the action. There is no jimping on the flipper tab, and I don’t think it needs it. My index finger has never slipped on the flipper.

Kizer Sheepdog Pivot and Flipper

For lockup we have a standard titanium framelock with steel lockbar insert. This is much like the Kizer Intrepid I reviewed two years ago. Kizer has the lock tuned to perfection. It locks up early, there is no blade play, and the lock is easy to disengage. There is no lock stick, and thanks to some contoured edges I can easily jam my thumb in place to release the lock bar. Much like the framelocks you find on a Zero Tolerance knife, this one just works.

Here is a parting shot of my Sheepdog next to the Paramilitary 2:

Kizer Sheepdog vs. Spyderco Paramilitary 2

Blade centering is perfect on my knife.

Kizer Sheepdog Review – Final Thoughts

The Sheepdog is not for everyone. In fact, the Sheepdog is not for most people. It’s simply too big and too heavy. Despite that this knife has been well received. After carrying one for a while I can see why. It’s well made and functional. For those who want something big and chunky, the Sheepdog could be the one.

While the Sheepdog a big chunky knife, it is surprisingly light on its feet. The blade cuts cleanly, the knife feels good in hand, and it actually carries alright thanks to an especially strong milled pocket clip. And you can’t argue with the material selection or the fit and finish. Top notch materials combined with excellent fit and finish all lend a premium feel to this knife. That’s important given its ~$200 price tag.

The end result is a big but surprisingly refined knife. It isn’t for everyone, but I suspect that those that find themselves drawn to the Sheepdog will be pleased with its performance and execution.

I recommend purchasing the Kizer Sheepdog at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: EDC Knives, Folding Knives, Kizer, Titanium Frame Lock Knives Tagged With: Chris Conway, framelock, Made in China, milled pocket clip, S35VN, sheepfoot, titanium

DPx Gear HEST/F Urban Review

by Dan Jackson 2 Comments

DPx Gear has been at it for a while now. They caught everyone’s attention with the original HEST fixed blade knife in 2008. Their first folder was the HEST/F, a knife I reviewed back in 2012. It was promising in a lot of ways, but ultimately a sticky lock and ponderous footprint kept it from being a truly covetable piece of urban EDC gear in my book.

DPx Gear Urban Review
Buy the DPx Gear HEST/F Urban at BladeHQ

Buy on Amazon

Since then we’ve reviewed a couple other DPx Gear folders, including the elegant Aculus and the cherry bomb proportioned HEAT/F. Both were beautifully made Italian knives. The HEST/F Urban is different from the other folders in that it is their first folder 100% made in the USA. Some may remember that DPx ran a Kickstarter campaign for this knife back in 2015. The Kickstarter campaign was a success, and the knife has since made it’s way into production.

Robert Young Pelton himself reached out to ask if I would review a HEST/F Urban, and this knife was provided to me by DPx Gear for review. All thoughts on this knife are my own.

General Dimensions and Blade Details

The Urban has an overall length of 6.75″, a 2.875″ blade, and weighs 4.27 ounces. The knife is made in the USA. As the name suggests, this is a smaller folder designed for urban or suburban Every Day Carry (EDC). DPx Gear has made some big and interesting stuff over the years, including their HEFT 12 Chopper, so to see them move towards a true urban daily carry knife is interesting.

Here is a size comparison with the Urban next to my Spyderco Sage 1:

DPx Gear Urban vs. Spyderco Sage 1

The HEST/F Urban features the same signature blade profile of their entire HEST series. It’s a drop point with a big sweeping belly, that tapers upwards towards the tip. The shape reminds me of the profile of a boat. The integrated cap lifter / wave feature is another novel aspect of the blade and a signature RYP design element. I’ll discuss the functional aspects of that further in the “deployment” section of the review.

The blade is ground from over 4mm thick stock. It’s substantial for a small folder like this, but the high flat grind gives the knife decent slicing performance. I found the Urban to be very capable with cardboard working through several thick cardboard boxes that I encountered in my latest round of work with my rental property.

The blade was extremely keen out of the box, and edge retention was excellent. The thick stock and partial flat grind means it won’t slice an apple like a traditional folder, but the knife will get the job done, and there are plenty of practical touches. The stonewashed finish on the blade hides wear and matches the hardware. There is a sharpening choil. And the edge has been evenly applied, a detail I always consider, as it can be a good indicator of quality control.

DPx Gear Urban Blade

In 2015 the Urban was originally offered in S30V blade steel. These days the Urban has been upgraded to S35VN. I’ve reviewed dozens of knives in S35VN at this point. Although it may not be the most exotic choice of blade steel, S35VN is excellent stuff and was a good choice for the Urban. This is a proven steel that holds a good edge, sharpens easily, exhibits high corrosion resistance, and is reasonably tough which means it will not chip out easily. S35VN is a great all round high performance blade steel.

I find that if you don’t completely dull the knife, then all you need to do to maintain a hair shaving edge is run the knife along the fine stones of the Spyderco Sharpmaker. Those fine stones are all you need to keep a razor edge on this knife.

Handle, Ergonomics and Pocket Clip

The handle of the Urban is comprised of two thick titanium slabs and a black hard anodized partial aluminum backspacer. The handle has been beautifully executed. Fit and finish is top notch. The titanium handle slabs have been chamferred and left with a bead blasted finish. The silver hardware and all the pieces are perfectly flush. There is a decorative oversize pivot. Everything exudes a level of quality that you would expect from a knife at this price point.

DPx Gear Urban Handle

The Urban is a small knife, but the spare design gives you plenty of room for a full 4 finger grip, and the thick build fills the hand. I found the Urban to be both a comfortable and capable work knife.

DPx Gear Urban Ergonomics

My only gripe with the ergonomics relates to the “wire stripping jimping”. Specifically, the biggest jimp farthest away from the tip of the blade. I find that to be too grabby for my tastes and would prefer either a smaller jimp, or more traditional toothed jimping. I levied this same criticism against the original HEST/F. While I understand that the Urban is designed to have a few multi-tool features integrated into the design, I’m still not sold on the wire stripping jimping.

DPx Gear Urban Pocket Clip

The Urban features a reversible tip up deep carry pocket clip. The clip has excellent spring strength, and it buries the knife into your pocket. While the knife is relatively thick and over 4 ounces, I don’t notice it during carry thanks to the small footprint and the excellent clip. The knife stays in place and out of the way until you need it. That is exactly how I like my folding knives to carry.

Deployment and Lockup

The Urban is interesting because it is a bearing equipped folder with thumb studs or a wave opener. As a lefty I find the thumb studs to be a little tight as there is not as much room to access the stud on the locking side of the knife, but there is plenty of room on the right side and once you get placement on the thumb stud the blade almost explodes open thanks to the strong detent and bearings.

DPx Gear Urban Spine

The bottle opener on the blade doubles as a wave opener. It’s an easy knife to wave off your pocket. Additionally you can use this as another spot to flick the blade open in addition to the thumb studs. The bearings are smooth to the point where you can easily shake the blade closed.

For lock up DPx Gear went with a titanium framelock reinforced with a steel lock bar insert. The steel insert doubles as an over-travel stop, but it also fixes the sticky lock issue that plagued the original HEST/F. Lockup is early. Around 40% of the lock face engages with the blade. Lockup is also secure. There is not a shadow of blade play in this knife. It’s rock solid.

Here is another size comparison with the ZT 0454CF:

DPx Gear Urban vs. Zero Tolerance 0454CF

I think DPx Gear nailed the lockup and deployment section. The knife rivals any Zero Tolerance folder I’ve handled. I think ZT is a good benchmark as their knives are consistently good. I think at some point DPx will need to use this OEM to build them a flipper of some sort.

Blade centering is perfect on my knife.

DPx Gear Urban Review – Final Thoughts

Hands down this is the best DPx Gear folder I’ve handled to date. I think they took all the lessons learned from their prior designs and built on those lessons to develop the Urban. I also think that the choice to work with a US based manufacturer is a good one. I like Lionsteel knives, but was never a big fan of the original HEST/F and the way it was built or the rotolock. This Urban is simply a better knife with its bearings and stainless steel lockbar insert. The rest of the knife has been beautifully built. The parts line up perfectly. The machining is crisp and clean. The finish work is superb.

For constructive criticism my biggest gripe is probably that one section of wire stripper jimping. It’s a little too sharp and toothy for me. But in practice I didn’t find that to be a deal breaker as I didn’t notice the jimping much when I actually cut things. Beyond that I don’t think I would change anything on this knife.

If you are a fan of sturdy little full titanium knives, knives like the Spyderco Techno, then I think you are going to enjoy this one. It’s nicely built, performs admirably, and is entirely unique. It’s not inexpensive, and the full titanium version here will set you back about as much as a Small Sebenza, but I think the quality is comparable. Additionally, DPx Gear offers a version of the Urban with a G10 scale that is around $200 and weighs about 3.6 ounces. At that price and with a near 1 ounce weight reduction, I think that is a highly competitive offering.

DPx HEST/F DPHSF027 Urban Ti First Run Limited Edition Folding Knife
DPx HEST/F DPHSF027 Urban Ti First Run Limited Edition Folding Knife
Buy on Amazon

I recommend purchasing the DPx Gear Urban at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: DPx Gear, EDC Knives, Folding Knives, Titanium Frame Lock Knives, USA Made EDC Knives Tagged With: bearings, framelock, Made in America, Robert Young Pelton, S35VN, titanium

  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Go to Next Page »

Primary Sidebar

Follow Us on FacebookFollow Us on TwitterFollow Us on YouTubeFollow Us on RSS

Subscribe to Email Updates and Never Miss a Review (No Spam)!

Enter your email address:

Delivered by FeedBurner

Shop BladeHQ

Shop Outdoor Gear on Amazon

Shop KniveShipFree.com

Search BladeReviews:

Best of BladeReviews:

Best EDC Knives
Best Survival Knives
Best Tactical Knives
Best High Value Knives

Copyright © 2023 · Log in