Made in America

DPx Gear HEST/F Urban Review

DPx Gear has been at it for a while now. They caught everyone’s attention with the original HEST fixed blade knife in 2008. Their first folder was the HEST/F, a knife I reviewed back in 2012. It was promising in a lot of ways, but ultimately a sticky lock and ponderous footprint kept it from being a truly covetable piece of urban EDC gear in my book.

Buy the DPx Gear HEST/F Urban at BladeHQ

Buy on Amazon

Since then we’ve reviewed a couple other DPx Gear folders, including the elegant Aculus and the cherry bomb proportioned HEAT/F. Both were beautifully made Italian knives. The HEST/F Urban is different from the other folders in that it is their first folder 100% made in the USA. Some may remember that DPx ran a Kickstarter campaign for this knife back in 2015. The Kickstarter campaign was a success, and the knife has since made it’s way into production.

Robert Young Pelton himself reached out to ask if I would review a HEST/F Urban, and this knife was provided to me by DPx Gear for review. All thoughts on this knife are my own.

General Dimensions and Blade Details

The Urban has an overall length of 6.75″, a 2.875″ blade, and weighs 4.27 ounces. The knife is made in the USA. As the name suggests, this is a smaller folder designed for urban or suburban Every Day Carry (EDC). DPx Gear has made some big and interesting stuff over the years, including their HEFT 12 Chopper, so to see them move towards a true urban daily carry knife is interesting.

Here is a size comparison with the Urban next to my Spyderco Sage 1:

The HEST/F Urban features the same signature blade profile of their entire HEST series. It’s a drop point with a big sweeping belly, that tapers upwards towards the tip. The shape reminds me of the profile of a boat. The integrated cap lifter / wave feature is another novel aspect of the blade and a signature RYP design element. I’ll discuss the functional aspects of that further in the “deployment” section of the review.

The blade is ground from over 4mm thick stock. It’s substantial for a small folder like this, but the high flat grind gives the knife decent slicing performance. I found the Urban to be very capable with cardboard working through several thick cardboard boxes that I encountered in my latest round of work with my rental property.

The blade was extremely keen out of the box, and edge retention was excellent. The thick stock and partial flat grind means it won’t slice an apple like a traditional folder, but the knife will get the job done, and there are plenty of practical touches. The stonewashed finish on the blade hides wear and matches the hardware. There is a sharpening choil. And the edge has been evenly applied, a detail I always consider, as it can be a good indicator of quality control.

In 2015 the Urban was originally offered in S30V blade steel. These days the Urban has been upgraded to S35VN. I’ve reviewed dozens of knives in S35VN at this point. Although it may not be the most exotic choice of blade steel, S35VN is excellent stuff and was a good choice for the Urban. This is a proven steel that holds a good edge, sharpens easily, exhibits high corrosion resistance, and is reasonably tough which means it will not chip out easily. S35VN is a great all round high performance blade steel.

I find that if you don’t completely dull the knife, then all you need to do to maintain a hair shaving edge is run the knife along the fine stones of the Spyderco Sharpmaker. Those fine stones are all you need to keep a razor edge on this knife.

Handle, Ergonomics and Pocket Clip

The handle of the Urban is comprised of two thick titanium slabs and a black hard anodized partial aluminum backspacer. The handle has been beautifully executed. Fit and finish is top notch. The titanium handle slabs have been chamferred and left with a bead blasted finish. The silver hardware and all the pieces are perfectly flush. There is a decorative oversize pivot. Everything exudes a level of quality that you would expect from a knife at this price point.

The Urban is a small knife, but the spare design gives you plenty of room for a full 4 finger grip, and the thick build fills the hand. I found the Urban to be both a comfortable and capable work knife.

My only gripe with the ergonomics relates to the “wire stripping jimping”. Specifically, the biggest jimp farthest away from the tip of the blade. I find that to be too grabby for my tastes and would prefer either a smaller jimp, or more traditional toothed jimping. I levied this same criticism against the original HEST/F. While I understand that the Urban is designed to have a few multi-tool features integrated into the design, I’m still not sold on the wire stripping jimping.

The Urban features a reversible tip up deep carry pocket clip. The clip has excellent spring strength, and it buries the knife into your pocket. While the knife is relatively thick and over 4 ounces, I don’t notice it during carry thanks to the small footprint and the excellent clip. The knife stays in place and out of the way until you need it. That is exactly how I like my folding knives to carry.

Deployment and Lockup

The Urban is interesting because it is a bearing equipped folder with thumb studs or a wave opener. As a lefty I find the thumb studs to be a little tight as there is not as much room to access the stud on the locking side of the knife, but there is plenty of room on the right side and once you get placement on the thumb stud the blade almost explodes open thanks to the strong detent and bearings.

The bottle opener on the blade doubles as a wave opener. It’s an easy knife to wave off your pocket. Additionally you can use this as another spot to flick the blade open in addition to the thumb studs. The bearings are smooth to the point where you can easily shake the blade closed.

For lock up DPx Gear went with a titanium framelock reinforced with a steel lock bar insert. The steel insert doubles as an over-travel stop, but it also fixes the sticky lock issue that plagued the original HEST/F. Lockup is early. Around 40% of the lock face engages with the blade. Lockup is also secure. There is not a shadow of blade play in this knife. It’s rock solid.

Here is another size comparison with the ZT 0454CF:

I think DPx Gear nailed the lockup and deployment section. The knife rivals any Zero Tolerance folder I’ve handled. I think ZT is a good benchmark as their knives are consistently good. I think at some point DPx will need to use this OEM to build them a flipper of some sort.

Blade centering is perfect on my knife.

DPx Gear Urban Review – Final Thoughts

Hands down this is the best DPx Gear folder I’ve handled to date. I think they took all the lessons learned from their prior designs and built on those lessons to develop the Urban. I also think that the choice to work with a US based manufacturer is a good one. I like Lionsteel knives, but was never a big fan of the original HEST/F and the way it was built or the rotolock. This Urban is simply a better knife with its bearings and stainless steel lockbar insert. The rest of the knife has been beautifully built. The parts line up perfectly. The machining is crisp and clean. The finish work is superb.

For constructive criticism my biggest gripe is probably that one section of wire stripper jimping. It’s a little too sharp and toothy for me. But in practice I didn’t find that to be a deal breaker as I didn’t notice the jimping much when I actually cut things. Beyond that I don’t think I would change anything on this knife.

If you are a fan of sturdy little full titanium knives, knives like the Spyderco Techno, then I think you are going to enjoy this one. It’s nicely built, performs admirably, and is entirely unique. It’s not inexpensive, and the full titanium version here will set you back about as much as a Small Sebenza, but I think the quality is comparable. Additionally, DPx Gear offers a version of the Urban with a G10 scale that is around $200 and weighs about 3.6 ounces. At that price and with a near 1 ounce weight reduction, I think that is a highly competitive offering.

DPx HEST/F DPHSF027 Urban Ti First Run Limited Edition Folding Knife

I recommend purchasing the DPx Gear Urban at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco UK Penknife (UKPK) Review

by Benjamin Schwartz 2 Comments

Last Updated: August 12, 2019
For a long time I believed that the Delica was not a well-designed knife. I realized recently, however, that what I actually meant was that, compared to many other designs in the Spyderco catalog, the Delica is simply outdated. Everything that I find irksome about it – the compromised ergonomics, VG-10 steel, lack of a forward choil – has been fixed in other, similarly-sized designs.

Buy the Spyderco UKPK at BladeHQ

Buy on Amazon

Not least among these better designs is the Caly 3. An improvement over the Delica 4 in just about every way, the only issue with the Caly 3 is that it’s two to three times the price of the Delica, depending on which flavor you choose.

But there’s a much less-well-known knife in the Spyderco catalog, a knife that is essentially a super lightweight, slipjoint Caly 3, and that costs only about as much as a Delica. It’s called the UK Penknife in FRN, a truly underrated knife, and one that I think is well worth checking out.

General Dimensions and Blade Details

The Spyderco UK Penknife lineup is kind of confusing. The first version, a G-10 model, was released in 2004, designed to conform to knife laws in the United Kingdom, which are stricter than those in the US. In 2005 the DKPK, a variant with a non-functioning Spyder Hole designed with the even stricter Danish knife laws in mind, was released.

In 2010, the Lightweight models were introduced, with FRN handle scales instead of G-10. These models came in three different handle colors, with two different blade shapes, each available with plain, partially-serrated, or fully-serrated edges.

In 2012, most of the color and edge options were discontinued, leaving only the black-handled models, and in 2013 the grind was changed from a hollow/saber grind to a full-flat one. My particular UK Penknife is from the discontinued generation, with maroon handle scales and a leaf-shaped, plain edge blade. The only difference between the currently available model and my own is the grind, which I will discuss below.

History aside, here’s what we’re looking at with the UK Penknife: a blade length of 2 15/16”, a handle length of 4”, and an overall length of 6 7/8”. It weighs just 1.9 oz; this weight is achieved not only because there are no liners beneath the scales, but because Spyderco rather brilliantly shortened the length of the spring, so that it only runs out to only about 60% of the spine; here’s a picture of it:

The UK Penknife is made in the Spyderco’s Golden, Colorado factory. On my particular knife, the fit and finish was superb. Everything was nicely finished and pleasing to the eye. The thing I could take issue with is the slightly sloppy edge grind: on side the bevel terminates earlier than the other. Of course, this doesn’t affect performance, so it’s not something I’m losing sleep over.

The Spyderco leaf shape blade has proven its utility over many years, across many knives. The UK Penknife’s particular rendition is almost exactly the same as that of the Caly 3’s, which means a narrower blade profile than something like the Sage knives or the Native, and with a better, more acute tip than the snub-nosed Delica. Like a traditional drop point blade, the leaf shape is a winner not so much because it excels in any one category, but rather because it has a such a wide vocabulary of use: cutting, piercing, mild prying, digging; the leaf shape can do it all.

As good as the blade shape is, the grind on my UK Penknife is a sticking point. It’s a hollow saber grind, and, like the similar grind on some Delica 4 models, it just doesn’t slice all that well. Compare it to the Caly 3’s full flat grind, and it isn’t even close. As Grayson pointed out in his Aculus review, there are definitely a lot of cutting tasks that don’t require slicing, but the fact is that in the case of the UK Penknife, a full flat grind would have just worked better: you would get slicing performance without losing anything. Spyderco must’ve realized this, because the newest model is full flat ground, and that knife, I am sure, would both cut and slice with aplomb.

The UK Penknife’s blade is made from CTS-BD1 steel. This is an American stainless steel that’s really only seen in Spyderco knives, but one that I really like. I think of it as a next-generation entry-level steel. It holds an edge better, and is less rust-prone, than AUS-8 or 8CR13MoV, and sharpens much easier than VG-10. The thing that I like best about it, though, is that it keeps what I call a ‘clean’ edge: that is to say, as it dulls it doesn’t get toothy or cut any rougher, even if it gets more difficult to make a cut. I’ve always cited N690Co as a steel that keeps a clean edge; BD1 is right up there with it. Also worth noting is the finish on my UK Penknife: a muted, mild stonewash, it’s something I haven’t seen on any other Spyderco knife, and it looks really nice.

Handle, Ergonomics, and Carry

The UK Penknife’s Caly 3 heritage really comes through in the ergonomics department. A handle with simple, unobtrusive contours, it manages the amazing trick of making any grip you care to hold it in seem like the one it was designed for. The forward half-and-half finger choil, a Spyderco staple, is characteristically excellent, giving you control over the blade during use.

Some people don’t like the feel of FRN. I can understand that: in some knives, it feels cheap, flimsy, a compromise rather than a considered choice. However, not all polymers are created equal, and the FRN that the UK Peknife is made from appears to be top shelf. I wouldn’t ever say it feels luxurious or anything like that, it exudes quality. I particularly like that the edges are all rounded over, imitating the smooth, comfortable feel of chamfered G-10 or titanium. In fact, I prefer the FRN scales of the UK Penknife to the CF laminate and steel liners of the Caly 3; they’re more comfortable and durable.

The wire clip is the same one on the Caly 3, the deep-carry wire clip. I don’t really know if I understand the ‘advantages’ of deep carry, but with so many terrible clip designs on the market right now, I’m just happy with something that works, even if I personally would prefer the spoon clip for its rigidity: I have broken two wire clips in the past.

Deployment and Lockup

Because it is a slipjoint, the UK Penknife opens a lot slower than locking knives: the tension of the spring against the tang remains all the way through the deployment process, generating friction. This doesn’t mean that you can’t flick the UK Penknife open; you can, but it takes a little finesse to do so, and really, I don’t mind just slow-rolling it open. There’s an interesting sort of very mild half-stop too, which I like because it, along with the audible snick you get when the knife is fully opened, gives you plenty of feedback while opening it.

When open, the UK Penknife feels very secure. Like the Pingo, it doesn’t take a ton of force to close it, which I prefer: I don’t like wrestling with my slipjoints to close them. I feel like the UK Penknife will be plenty safe in any reasonable role. But beyond this, holding the knife with your forefinger in the half-and-half choil, you create a sort of lock with your hand – a very nice touch that is echoed in many of Spyderco’s slipjoints. Needless to say, with any cutting tool, and in most real-life cutting tasks, good sense will do more work than a lock would in preventing accidents.

Spyderco UK Penknife Review – Final Thoughts

The version of the UK Penknife that I have is a near-perfect, lightweight, lockless version of the Caly 3, hindered only by a weird grind. The 2013 UK Penknife fixes that issue and might just be the best entry level-priced Spyderco on the market.

Once you get in the $80-120 range, the competition gets a lot fiercer, but even compared to the those knives – the Spyderco Native 5, the Chapparal, the Paramilitary 2 – the UK Penknife is not without its appeal. For a knife based off one of the perennial darlings of the Spyderco lineup, the UK Penknife is a surprisingly underrated gem.

Spyderco UK Penknife Leaf Lightweight Folding Utility Pocket Knife - Black FRN Handle with PlainEdge, Full-Flat Grind, CTS BD1 Steel Blade and SlipIt - Everyday Carry - C94PBK

Leaf Shaped Blade - A blade shape developed and refined by Spyderco. It is similar to a spearpoint, but not completely symmetrical, and has a more acute point and typically no swedge.
SlipIt - A non-locking system that combines the convenience of clip carry and one-hand opening with a socially friendly notch-joint mechanism that helps hold the blade safely open during use, but does not mechanically lock it.
FRN Handle - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles.
Full-Flat Grind - This knife features a blade ground with flat bevels that extend from the spine all the way to the cutting edge. This grind reduces drag during cutting and decreases overall weight.
Specifications - Closed Length (Inches): 3.95, Overall Length (Inches): 6.88, Blade Length (Inches):2.93, Blade Steel: CTS BD1, Grind: Full-Flat

If you want to buy a Spyderco UKPK, I recommend purchasing it at Amazon or BladeHQ. Thanks for reading.

Benchmade 915 Triage Review

by Dan Jackson 17 Comments

Last Updated: July 28, 2019
Rescue knives often go unnoticed in the knife community. There are large groups of enthusiasts gathered around tactical, survival, and EDC knives, but I have yet to see the rescue knife develop such a loyal following. One could argue that the average person doesn’t “need” a rescue knife, but do we really have a need for the collection of high end tactical knives stashed away in the safe? No, I argue that rescue knives traditionally “aren’t as cool” in the eye of the average consumer, and as a result most people haven’t been as excited about them.

Buy the Benchmade Triage at BladeHQ

Buy on Amazon

Well Benchmade is working hard to end that stigma and show that rescue blades can be just as cool and collectible as any other type of knife, by introducing the 915 Triage. But this knife doesn’t just look good. The Triage is part of Benchmade’s “Black Class,” which means it’s been designed and built with professional use in mind.

General Dimensions and Blade Details

The Triage has an overall length of 8.2″, a 3.5″ blade, weighs 5.1 ounces, and is made in America. The Triage, like most rescue knives, is a pretty big knife. This is a beefy knife and it has some heft when compared with something like the Benchmade Griptilian, which is comparable in length yet weighs only 3.2 ounces. However, we have to remember that the Triage has some extra hardware (a 440c safety cutter and a carbide glass breaker), has full stainless steel liners, G10 scales, and is built for maximum strength and durability.

The Triage sports a modified sheepsfoot shape blade with a high flat grind and a fine, slightly curved edge with just a slight amount of belly. This blade style is essential for a rescue knife because the blunted tip allows you to get in close to people you are rescuing without stabbing them. The flip side is, if you need something with stabbing capabilities, the 915 won’t have them. But this is a specialized tool so it was wise not to try and compromise. You have the option of a plain or combo edge, with a BK1 matte black coating or a plain satin-finished blade.

Benchmade chose N680 stainless steel for the blade. Made by Bohler-Uddeholm, this Swedish steel is specifically formulated for high corrosion resistance, even in salt water environments. It should come as no surprise that Benchmade has been using this steel in a few of their dive knives with great success.

Benchmade heat treated the N680 on this particular knife to 57-59 HRc, which will maximizes toughness for this particular steel while providing good edge retention and sharpenability. I think this was a great choice for a rescue knife because again, this thing is going to get abused. Its going to get wet and it probably won’t be sharpened as often so the unique properties of this steel will help preserve performance and enhance durability.

Handle, Ergonomics, and Pocket Clip

The 915 Triage handle is a semi-open design with textured G10 (available in black shown here, or safety orange) over full stainless steel liners. Like many Benchmade liners, they are made of 420J, which is tough stuff. As I mentioned previously, this adds weight, but it also adds strength. In the high stress hard use environments I could see this knife being used, I think it’s a good trade-off. The G10 used here is plain in appearance, but extremely grippy thanks to the aggressive texture applied in the factory.

In addition to the grippy G10, the ergonomics of the 915 are quite solid. There is no jimping on the spine of the blade, but there is a good amount on the handle, and it allows for good purchase and control. The handle is also nice and large, offering a comfortable forward or reverse grip. Also, the ergos are good when you are using the hook-shaped safety cutter, which is important since many people will be buying the knife for that feature.

The pocket clip is a blackened version of Benchmade’s typical deep carry pocket clip. This is a strong clip with good retention. It buries the knife discretely into the pocket, but still leaves enough for the user to grab easily. The handle has been drilled and tapped for ambidextrous tip up carry. The Triage is a heavier knife, but it still caries well thanks to the strong deep carry clip. All said, I am a fan of this pocket clip.

Lock and Deployment

The 915 Triage uses the tried and true Benchmade Axis lock. I’ve talked about this lock at length, but suffice to say it’s one of my favorite locks on the market. The Axis lock is strong, yet it is still smooth and easy to disengage. I also like how it is completely ambidextrous, and that you you can keep your fingers away from the blade when closing. Lock up is solid on my knife. It is not uncommon for axis lock knives to develop some side to side play, and if that happens a little lock-tite and the turn of a torx wrench puts you back in business.

Deployment on the Triage is fast and smooth thanks to prominent ambidextrous thumb studs and phosphor bronze washers. This is a time-tested formula for Benchmade and it works here as well. That said, I would be curious to see what this knife is like with a thumb hole. The blade is already pretty wide, but it might work well with a thumb hole. At any rate, the knife opens and closes smoothly. Blade centering is good on my knife.

Special Features: Safety Cutter and Carbide Glass Breaker

For many people a big part about what makes this a rescue knife is the additional features. Namely, the safety cutter and glass breaker. The safety cutter folds out and features a large (and sharp!) hook. Benchmade chose 440C for the cutter and I think it’s an excellent choice. 440C is good steel and when it’s properly heat treated it will work well. A cutter like this is used in those situations where the relatively big blade is either impractical or impossible to use.

The cutter doesn’t have a true lock, it clicks in place kind of like a slip-joint. It is reasonably secure and the rescue hook blade is extremely sharp. This is not a novelty or gimmick – this will cut through seat belts, clothing, and even shoe leather with ease.

The carbide glass breaker is sunk into the butt of the handle. It’s not big, but it will get the job done.

Benchmade 915 Triage Review – Final Thoughts

The Triage is a thoughtfully designed and well made knife. I like the practical design, the high quality materials, and the outstanding fit and finish – which is par for the course when you are talking Benchmade. What I like is how Benchmade took the rescue knife concept, upgraded it, and also turned it into something cool.

I am not a first responder, so I can’t comment on the knife with regards to how well it works in a first responder situation, but I can say that this is a robust knife and unique knife. I see no reason why it wouldn’t work well in a rescue situation. The glass breaker and safety cutter are fully functional and made to Benchmade’s typical standards. The knife itself is fully functional: it’s comfortable to use, it cuts well, and is easy to maintain.

Whether you are an actual first responder looking for an every day tool, or a normal person wanting a heavy duty EDC, I think the 915 Triage has a lot to offer, and remains the coolest rescue knife to ever cross my desk.

Benchmade - Triage 916SBK, Black Handle, Triple Utility Tool, Knife, Safety Hook and Glass Breaker, Made in the USA

HIGH-QUALITY: The N680 stainless steel blade has the best corrosion resistance of any blade steel, making it ideal for saltwater applications. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures.
MADE FOR RESCUE: The Triage 916's opposing bevel blunt-tip blade style, safety hook, and glass breaker make it ideal for rescue. It's al
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Triage 916 is a manual knife that can be opened and closed with either hand.
ALWAYS READY: The 916's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.

I recommend purchasing the Benchmade 915 Triage at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.