• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

BladeReviews.com

Knife Reviews

Menu
  • Home
  • Reviews by Brand
    • Al Mar Knives
    • Benchmade Knives
    • Boker Knives
    • Buck Knives
    • Cold Steel Knives
    • Chris Reeve Knives
    • CRKT Knives
    • DPx Gear
    • Emerson Knives
    • ESEE Knives
    • Fällkniven Knives
    • Fantoni Knives
    • Gerber Knives
    • Great Eastern Cutlery
    • Hinderer Knives
    • Hogue Knives
    • Ka-Bar Knives
    • Kershaw Knives
    • Kizer Knives
    • LionSteel Knives
    • Mcusta Knives
    • Mora Knives of Sweden
    • Microtech Knives
    • Ontario Knives
    • Opinel Knives
    • Reate Knives
    • Rockstead Knives
    • Schrade Knives
    • Shirogorov Knives
    • Smith & Wesson Knives
    • SOG Knives
    • Spartan Blades
    • Spyderco Knives
    • Steel Will Knives
    • Strider Knives
    • Victorinox Knives
    • Viper Knives
    • Zero Tolerance Knives
    • Close
  • Reviews by Purpose
    • EDC Knife Reviews
    • Tactical Knife Reviews
    • Survival Knife Reviews
    • Hard Use Folding Knives
    • High End Pocket Knives
    • Gentleman’s Folders
    • Rescue Knives
    • Traditional Knives
    • USA Made EDC Knives
    • Close
  • Reviews by Class
    • Folding Knives
    • Fixed Blade Knives
    • Assisted Opening Knives
    • Automatic Knives
    • Machetes
    • Titanium Frame Lock Knives
    • Close
  • Best Of
    • The Best EDC Knives
    • Best Survival Knives
    • Best Tactical Knives
    • Best High Value Knives
    • Close
  • Gear Reviews
    • Flashlight Reviews
    • Multi-Tool Reviews
    • Watch Reviews
    • Knife Sharpener Reviews
    • Close
  • FAQs
    • Knife Care and Maintenance
    • Knife Dictionary
    • Knife Steels
    • Steel Composition
    • Interviews
    • Close
  • Contact
  • About
    • About
    • Privacy
    • Links
    • Close

Andrew Demko

Cold Steel AD-10 Review

by Seth Vietti 5 Comments

Of all the words used to describe Cold Steel knives here on BladeReviews.com, “refined” isn’t at the top of the list. That’s not a metaphor – I literally made a list, and “refined” only appears three times. You’re much more likely to see Cold Steel knives described with adjectives like “strong” (41 times), “large” (39 times; followed closely by “big” at 38), and “comfortable” (26).

Cold Steel AD-10 Review
Buy the AD-10 at BladeHQ

Buy on Amazon

Speaking as a former Cold Steel skeptic, I was unsurprised to find that the AD-10 is indeed strong, large (big), and comfortable. What did surprise me was just how good this knife is. It delivers the essence of Cold Steel, refined. It might be the best knife they’ve ever made. And if you, like me, ever scoffed at Cold Steel’s marketing or rolled your eyes at their product names, read on, because the AD-10 will catch you off guard.

General Dimensions & Blade Details

The proportions of this knife are deceptive. Yes, it’s big, but the wide handle, snubnosed blade, and protruding backspacer make it look even bigger – as if there’s another knife trapped in there, bulging through the seams trying to get out. Makes sense, considering the AD-10 is a downscaled version of designer Andrew Demko’s gargantuan 4-Max. Here it is filling out a Spyderco sandwich, between the longer Military and shorter Paramilitary 2:

Cold Steel AD-10 vs. Spyderco Military and Paramilitary 2

The AD-10’s blade is clearly optimized for strength. The tip is wide, thick, and feels practically unbreakable. It penetrates more like an armor-piercing round than a needle, meaning it’ll get you into just about anything so long as you don’t care what kind of hole you leave behind. Behind the tip, the grind thins out quickly to a relatively thin edge thanks to a nicely executed hollow grind. Don’t let anyone tell you that thick knives can’t slice – the AD-10’s substantial 3.9mm blade stock and deep hollow grind work together like a zipper, holding material apart from the blade after the edge separates it. Compared to a full flat ground knife of similar stock thickness, the AD-10 carves through cardboard with noticeably less friction, powering through the nasty two- and three-ply stuff rather than getting wedged in.

Cold Steel AD-10 Cutting Cardboard

There’s no avoiding the laws of physics, however: a hollow grind can only do so much for a knife this thick. It’s graceless in the kitchen, where the tip mashes more than it pierces, and crisp produce is split, not sliced. Then again, the AD-10 isn’t anyone’s idea of a kitchen knife. For more utilitarian cutting it works with surprising agility, despite looking like a wrecking ball.

Cold Steel AD-10 Blade

The blade steel, S35VN, has performed well for me. Edge retention has been good; stainlessness, excellent. As for toughness, it did not disappoint. I took the AD-10 on a hike and ended up using it to trim back a bush that had overgrown the trail. A careless chop glanced into a stone, damaging the edge where it hit. Thankfully, the steel was tough enough to roll, not chip, so the damage was easy to sharpen out.

Handle, Ergonomics, & Pocket Clip

At just over three and a half inches long, I wouldn’t call the blade oversized. The handle, though, is another story. Even if you ignore the extended pommel, it still measures in at 5.25 inches. For perspective, that’s almost as much handle as the Spyderco Military, with about as much blade as the Para 2. Yeah. If you’re someone who obsesses over high blade:handle ratios, this isn’t your knife. To top it off, the AD-10 is bulky, too; easily eclipsing my heretofore thickest knife, the Victorinox Alox Farmer.

Cold Steel AD-10 Thickness

These comparisons aren’t complaints. Because the AD-10 is the most comfortable folding knife I’ve ever used. Andrew Demko is a master of ergonomics. You’d think a knife with this many finger grooves – plus a front and rear guard – would feel awkward to move around on, but the AD-10’s smooth and deeply sculpted handle isn’t so prescriptive that you feel locked in to any single grip.

Cold Steel AD-10 in Hand

The pocket clip is wide, polished, and barely noticeable in hand. The lock bar and backspacer leave no palm-pinching voids in the back of the handle. Every edge, every corner is shaped or softened. It all feels very purposeful, allowing you to exert more force with less strain – this is a knife that makes “hard use” feel easier. One ergonomic caveat: the forward finger choil might be a little cramped for thicker fingers, although I didn’t have any issues.

Cold Steel AD-10 Ergonomics

The unavoidable problem with a knife this fist-filling is how awkward it is to carry in a pocket. I mean, it’s 6.8 ounces and thicker than a coin purse on laundry day. I can deal with large knives (see my review of the Spyderco Hundred Pacer), but the AD-10 stretches (literally) the capacity of my pockets. If you wanted to carry it in your waistband, you’d probably need to buy bigger pants. Even though it hurts to suggest something so shamefully uncool, your best option might actually be a belt pouch.

Cold Steel AD-10 Pocket Clip

Still, despite the weight and bulk, I’d pick the AD-10 for my pocket before any of the other Cold Steel folders I’ve owned. The clip – while it could use a little more “ramp” at the lip to help it over thick seams – is an improvement over the too-short, too-stiff, death grip clips I’ve struggled with in the past. And unlike the pocket rasps Cold Steel typically uses for handle scales, the smooth G10 on the AD-10 makes stowing and retrieving the knife a cinch.

Deployment & Lockup

At this point, Cold Steel’s Tri-Ad lock needs little introduction – it’s simply one of, if not the strongest locking system on the market today. What impresses me more than its absolute strength is its tolerance for abuse over time. Even if you were to impact it hard enough to deform the lock face, the built-in play around the lock bar pivot preserves solid lockup, by allowing the lock bar to reset itself against the stop pin. It’s clever engineering, but that play in the lock bar can sometimes make the Tri-Ad lock sticky and hard to disengage. Not so here: the AD-10 unlocks cleanly without the need for any break-in.

Cold Steel AD-10 Tri-Ad Lock

Ambidextrous thumbstuds and glassy smooth Teflon washers make for satisfying deployment, whether you open it slowly or with a quick flick. Closing it back up one-handed is a little counter-intuitive. So long as you don’t pull your fingers away from the heavy falling blade, they’ll safely catch the choil and not the edge, though thicker fingers should proceed with caution.

A partially open Cold Steel AD-10

Cold Steel AD-10 Review – Final Thoughts

The AD-10 feels like the latest and greatest result of an ongoing evolution at Cold Steel. I can’t pinpoint when it started, exactly, but I started to take notice when they upgraded their blade steel across the board in 2015.

Cold Steel AD-10

Ever since then, it seems like they’ve been taking the cheesy machismo that built the brand and distilling it into impressive products that do more than just tactical wish fulfillment (not that there’s anything wrong with that – I once owned a Rajah 2, after all). The AD-10 doubles down on what Cold Steel have always done well – big, brash, and strong – but doesn’t swagger over the little details. It’s not a knife I can always carry, but definitely one I enjoy using when I do. If your pockets will stretch for it, you won’t find a more capable and comfortable folder at this price point.

Sale
Cold Steel AD-10 and AD-15 Tactical Folding Knife with Lock and Pocket Clip - Premium S35VN Steel Blade, AD-10
Cold Steel AD-10 and AD-15 Tactical Folding Knife with Lock and Pocket Clip - Premium S35VN Steel Blade, AD-10
  • PREMIUM, ALL-PURPOSE BLADE: Features an ultra-wide saber ground blade with a sturdy drop point perfect for everyday carry (EDC), a big game hunt, dangerous expedition, or exciting adventure; Made with premium, ultra tough S35VN steel
  • HIGH PERFORMANCE IN EVERY SITUATION: Ground thin at the edge and honed to razor sharpness for unprecedented cutting, shearing, and piercing power in a sub 4-inch blade while remaining remarkably resistant to bending, breaking or chipping
  • COMFORTABLE, SECURE GRIP: The handle is strong and user-friendly with heat-treated, full-length aluminum liners, 3D machined G-10 scales, and oversized pins and bolts; Fits snugly in the hand due to precise contouring and integral finger guard
  • ULTRA-RELIABLE LOCKING MECHANISM: Uses custom knife-maker Andrew Demko's famous TriAd lock that has been proven over time to be unsurpassed in strength, shock resistance and durability and gives unrivaled protection for your irreplaceable fingers
  • USER-FRIENDLY FEATURES: Equipped with an ambidextrous thumb stud and dual pocket clips for lightning quick deployment and convenient carry
$134.84
Buy on Amazon

Editor: I recommend purchasing the Cold Steel AD-10 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Cold Steel, Folding Knives, Hard Use Folding Knives Tagged With: Andrew Demko, g10, made in Taiwan, S35VN, tri-ad lock

Cold Steel Pro Lite Sport Review

by Dan Jackson 1 Comment

Today we are taking a trip to value town. It has been a long time since I reviewed a sub $25.00 pocket knife, and as of the day of publication, the Cold Steel Pro Lite Sport is closer to $20 than $25.

Cold Steel Pro Lite Sport Review
Buy the Cold Steel Pro Lite Sport at BladeHQ

Buy on Amazon

Ben reviewed the original Pro Lite back in 2016, and as usual he did a great job. But as an unabashed Cold Steel Fanboy, part of me wanted to sample this vintage for myself. So when Cold Steel introduced the “Sport” version of the knife with a thumb hole, I decided to buy one for review.

Cold Steel Pro Lite Sport

And I’m glad I bought one. For under $25 this may be the most solid utility folder I’ve ever owned. It’s another Andrew Demko design for Cold Steel, but it’s at a price point even non-knife people can appreciate.

General Dimensions and Blade Details

The Pro Lite Sport has an overall length of 8.00″, a 3.5″ blade, a weight of 3.2 ounces, and is made in Taiwan. As usual, Cold Steel has produced a larger knife, but the Pro Lite Sport feel smaller than some of their knives I’ve recently reviewed.

I think it’s a great size for those who can carry a larger utility knife. Personally, my day job is serving as a small town lawyer, so I’ve used mine as a “nights and weekends” carry. It has worked well in that regard. I’ve taken the knife fishing a number of times, and it’s worked well as a fishing knife. It’s robust and inexpensive, so I don’t mind exposing it to salt water, cut bait, etc. It’s a nice choice for dirty jobs.

Here is a shot of it next to my Medium Voyager, a smaller Cold Steel blade:

Cold Steel Pro Lite Sport vs. Medium Voyager

The Pro Lite Sport has a primitive looking drop point blade. The oval thumb hole and prominant “beak” to the blade reminds me of the profile of a prehistoric animal. The unique profile has been given a partial hollow grind, swedge, and stonewashed finish. The edge bevels on my knife are almost completely even, and the edge terminates in a stout tip. The only sign that this is a budget blade is some light machining marks on the spine and inside the thumb oval.

The steel chosen for the blade is Krup 4116. This is a stainless steel that I don’t have a ton of experience with. ZKnives offers his chemical composition and a nice description of the steel.

Krup 4116 is a carbon steel manufactured by German company thyssenkrupp, and is the same steel found in many Henckels and Wustof knives. I own a Wustof paring knife that I use daily, so maybe I have more experience with this steel then I realize.

In my experience Krup 4116 is one of those easy to sharpen steels that won’t hold an edge forever, but is forgiving and easy to maintain. Sort of like 440C or AUS-8, but according to Z-Knives this is a little closer to 420HC.

Cold Steel Pro Lite Sport Blade

Whatever it is, Cold Steel has done a good job with the heat treat. It came shaving sharp out of the box, and I’ve put it to work breaking down boxes, opening mail, slicing fruit, and taken it fishing a few times.

I’ve gotten into espresso lately, which means I’ve ordered all sorts of crazy espresso making supplies, and have transformed a corner of our kitchen into a low grade food sciences laboratory. Lots of boxes in the mail, and I’ve been using the Pro-Lite to break them down. The edge slows down after a few boxes, but it only takes a few swipes on my Golden Stone to bring it back to sharp. This is the kind of steel that is so easy to sharpen you can feel it get sharper on the stone.

As usual for Cold Steel, it’s a superb knife to cut with. Handles well and cuts great. No rust or corrosion either. No complaints.

Handle, Ergonomics, and Pocket Clip

The handles of the Pro Lite Sport are made of linerless high density plastic. This is a lock back knife, but there is a small integral plastic backspacer on the last third of the handle. Construction is screw together. Fit and finish is excellent. All the parts line up and there are no sharp edges to the handle. The result is a lightweight and durable handle.

Cold Steel Pro Lite Sport Handle

An obvious comparison would be with the Ka-Bar Dozier Folding Hunter, but there is no comparison. Compared with the Pro Lite, the Dozier Folding Hunter feels like a light duty toy that could break in half at any moment. Don’t get me wrong, the Folding Hunter is a fine light duty tool, but there is no comparison when it comes to the strength of these two knives. With the Pro Lite there is little flex when I try to squeeze the handles together. About as much flex as you would see on one of their linerless G-10 handled knives. The build quality is impressive.

Cold Steel Pro Lite Sport Ergonomics

The ergonomics are excellent. This generous handle is simple and will accommodate a wide range of hand sizes. It takes to my paw like a duck to water. The handles are lightly textured, and there is a run of wide jimping along the back of the handle. This offers good traction and tactile feedback without being overly obnoxious. The handle is comfortable in forward and reverse grips. No complaints.

The pocket clip is a stout stainless steel spring clip. The handles are drilled and tapped for ambidextrous tip up carry, and there are recesses in the handle for the pocket clip to slot into. The clip isn’t going anywhere, and it offers good spring retention.

Cold Steel Pro Lite Sport Pocket Clip

The Pro Lite Sport performs admirably in the pocket. The clip is pretty deep, burying 90% of the knife in your pocket. The knife is lightweight and the handle is relatively thin. It’s thicker than my Code 4, but much thinner than the chunky Voyager. At just over 3 ounces it carries wonderfully.

Here is your pocket clip shot:

Cold Steel Pro Lite Sport in the Pocket

Deployment and Lockup

The biggest difference between the original Pro Lite and this Pro Lite Sport is the use of a thumb hole instead of the thumb stud that appears on the original model. Cold Steel does a good job with their thumb studs, and Ben seemed to like the ones included on his Pro Lite, but there is a certain elegance and practicality to the thumb hole that is hard to ignore. The thumb hole is readily accessible, and it’s easy to open this knife with your thumb.

Here is another size comparison with the Medium Voyager to show how relatively thin the handles are on the Pro Lite Sport:

Cold Steel Pro Lite Sport Handle Thickness

The action is relatively fluid and smooth. The washers are made of teflon. I prefer phosphor bronze washers, as they are smoother and more durable, but for a sub $25 knife you are going to get some compromises. This is one of those compromises. Personally I think the action is good enough for government work, although in a perfect world we would have phosphor bronze washers here.

For lockup we of course have a Tri-Ad lock. That almost goes without saying as the lock appears on almost all of Cold Steel’s folding knives. And once again that Tri-Ad lock performs admirably. For the uninitiated, the Tri-Ad lock is an improved back lock. It’s a proven lock design, and is arguably the toughest lock on the market today.

Even though this is a plastic handled knife, I cannot muscle out any blade play. It’s rock solid. As usual, the lock bar is strong. So if you aren’t used to Tri-Ad lock knives you are going to want to include a grip strength tool with your order to bulk up the muscles in your hand. But for those familiar with this style of lock it offers a level of security that only a Tri-Ad lock can bring. Granted, I’m not doing anything crazy with any of my folding knives, but I wouldn’t hesitate to use this knife for any difficult task.

While something like the Dozier Folding Hunter is a decidedly “light duty” blade, this Pro Lite will handle chores like hard carving, and crunch cutting thick rope without protest. On that note, I wish I had my Dozier Folding Hunter handy for a size comparison, but couldn’t find it for this review.

Instead, here is a parting shot with my recently reviewed Cold Steel Golden Eye:

Cold Steel Pro Lite Sport vs. Cold Steel Golden Eye

Blade centering is perfect on my knife. Lovely to see on a sub $25 folder.

Cold Steel Pro Lite Sport Review – Final Thoughts

I think the Pro Lite Sport is my favorite sub $25 folder. It’s a rock solid performer and it packs a ton of value. I think Cold Steel allocated their limited budget appropriately. The design is great, and they selected appropriate materials. I would prefer to see the teflon washers replaced with phosphor bronze. It may raise the price slightly, but I think it would be worthwhile. Beyond that, I find it hard to complain about this knife.

If you are looking for a lightweight, tough, and inexpensive knife, then look no further. I haven’t reviewed a knife that has provided this much bang for your buck in a while. My favorite sub $40 folder is the ESEE Zancudo, and that continues to be an excellent knife. It is a better choice for urban EDC thanks to it’s smaller profile. It’s also ~$10 more.

But if you want a no-nonsense work knife, then the Pro Lite Sport gets the nod. If offers an amazing bang for your buck. At this price they make nice gifts, and are cheap enough to keep as a dedicated tackle box knife, or a truck knife, etc. I think the Pro Lite Sport is a great inexpensive folding knife and I highly recommend it.

Cold Steel 20NU Pro Lite, Sport, Clip Pt, Black
Cold Steel 20NU Pro Lite, Sport, Clip Pt, Black
  • Blade length: 3.5 inch
  • Overall: 8 inch
  • Steel: 4116 German stainless steel
  • Made in: Taiwan
Buy on Amazon

I recommend purchasing the Cold Steel Pro Lite Sport at Amazon or BladeHQ. Please consider that by purchasing things through any of the links on this website you support BladeReviews.com, and help produce future reviews. Thank you very much.

Filed Under: Cold Steel, EDC Knives, Folding Knives Tagged With: 4116, Andrew Demko, drop point, tri-ad lock

Cold Steel Golden Eye Review

by Dan Jackson 8 Comments

One visitor to the site commented that we are “a little biased towards Spyderco”. It’s probably because we have reviewed a lot of Spyderco knives over the years. More than any other brand. I like Spydercos and so does Ben, Grayson, Josh, and pretty much everyone who has written for the site. We all like their knives and consequently Spyderco has gotten a ton of air time over the years. If reviewing Spyderco knives is wrong, then I don’t want to be right.

Cold Steel Golden Eye
Buy the Cold Steel Golden Eye at BladeHQ

[easyazon_cta align=”center” identifier=”B019RSXKXO” key=”tall-orange” locale=”US” tag=”brdfkdfk-20″]

Perhaps more controversial is my attraction to Cold Steel Knives. I have reviewed a bunch of them over the years. I’m a big fan, although most of them are too big and impractical for me to truly carry and use. I think I may have a fetish because none of the other authors appear to share the desire to review C.S. stuff. Ben reviewed the Large Espada and the Pro-Lite, so I suspect he may also have a little Lynn Thompson in him, and Chad reviewed the Kudu, but that’s it.

Me? I’ve reviewed 15 Cold Steel knives. 16 if you include this Golden Eye. Yeah… that’s an addiction. I blame it mostly on their excellent marketing videos. Also Cold Steel keeps coming out with stuff I want to review. Andrew Demko keeps turning out hits, and I keep buying them. The Golden Eye is no exception. It looked cool, and slightly different from the other Cold Steel knives with it’s golden thumb hole. Had to have it. Sorry (not sorry).

General Dimensions and Blade Details

For some reason I thought the Golden Eye would be smaller. Maybe that’s because Tony wrote a quick review on it a few years back, and he typically picks out smaller more practical knives. Who knows. This is not a small knife. It has an overall length of 8.375″, a 3.5″ blade, and weighs 4.3 ounces. It’s made in Taiwan like most of Cold Steel’s other folders.

Cold Steel Golden Eye

This is a bigger knife. The handle in particular is pretty large, but that’s OK as we will soon learn it is comfortable. That said, it feels light for its size and will make a great work knife. Not a great urban EDC option.

The blade is a big beautiful drop point. The overall profile reminds me of the Terzoula Slipit with its angled thumb ramp extending into a swedged drop point blade. It’s the kind of no-nonsense blade shape that will serve you well in virtually any task. The blade is ground thin with a deep hollow grind, has been given a two-tone satin finish, and is finished with a neat and evenly applied edge.

Cold Steel selected S35VN for this knife. These days the vast majority of their premium folders come in S35VN, replacing CTS-XHP, which replaced AUS-8. S35VN should need little introduction at this point. It is an American made steel designed as a follow up to S30V. It is specifically formulated for knife steels and is great stuff. It takes a good edge, has good edge retention, doesn’t rust or stain easily, finishes nicely, is reasonably tough, yet is easy to sharpen. It’s an excellent blade steel.

Cold Steel Golden Eye Blade

And the S35VN really sings on the Golden Eye. I was borderline shocked with how well this knife performed. It slices cardboard with aplomb. It absolutely zips through the stuff. No issues with rope. Great for slicing fruit and other work in the kitchen as well. This is a sturdy knife but it’s ground to slice and has performed phenomenally well in my use and testing.

I’ve been touching up the Golden Eye on my [easyazon_link identifier=”B001JL1I6Y” locale=”US” tag=”brdfkdfk-20″]Spyderco Golden Stone[/easyazon_link], and the edge stays freaky sharp that way. Must be all the gold. No complaints with the blade or blade steel on this knife.

Handle, Ergonomics, and Pocket Clip

The Golden Eye uses Cold Steel’s tried n’ true method of thick linerless G-10 handle scales. I’ve reviewed many of their knives with similar construction, and this knife works just as well as the others. The G-10 is thick and sturdy. There is very little flex when you try to squeeze the handle slabs together.

Cold Steel Golden Eye Handle

Fit and finish on the handle is excellent. Everything has been neatly finished. The parts are all flush and the handle screws together so the knife can be taken apart and maintained. The choice of forest green for the handles is a nice touch. It’s a little different without being too far out there, and contrasts with the gold hardware.

I wasn’t sure how the ergonomics would be on the Golden Eye. I guess that’s true for every knife I order, but the Golden Eye in particular had me guessing thanks to the multiple finger scallops. Complicated finger grooves can be a mistake if they force your hand into an awkward position. Here the groves are generous. They feel comfortable and work well for me. I think that most people will find this knife comfortable to use, but I haven’t taken a poll on this. Let me know in the comments section if you have this knife but don’t like the way it feels in hand. Personally, I’m a fan.

Cold Steel Golden Eye Ergonomics

In addition to the finger grooves you have peel ply G10 for grip, and some light jimping along the back of the handle. These features provide a good amount of texture without going over the top. Overall I find this to be a comfortable knife to hold in forward and reverse grips. I’ve used this knife extensively and find it to be comfortable to cut with.

The Golden Eye comes with a large gold colored pocket clip and is configured for ambidextrous tip up carry. The clip appears to be designed for strength. You have milled recesses in the handle for the clip along with 3 screws. Spring strength is excellent and the knife is kept firmly in place.

Cold Steel Golden Eye Pocket Clip

In the pocket the Golden Eye carries well for what it is. It’s a bigger knife, so I tend to notice it, but it’s also a thin handled knife and it’s relatively light for its size. Not a boat anchor, but not a feather either. The strong clip keeps the knife firmly in place. All said I think the Golden Eye behaves nicely in the pocket for a larger knife.

Cold Steel Golden Eye in the Pocket

Deployment and Lockup

This knife uses a stepped thumb hole to get the blade open. Cold Steel calls this the “Hollow Thumb Ramp” (HTR), and that acronym is pretty accurate. In practice the HTR works well and is a cool idea. It’s kind of a hybrid between a thumb hole and thumb stud. There is a lot for your thumb to grab onto, and this knife can be opened with gloves as well. The serrated thumb hole is held in place with a set screw, which is kind of interesting. It’s a nice design and one I wouldn’t mind seeing on more knives.

Cold Steel Golden Eye Tri-Ad Lock

It’s worth noting that the gold plating on the thumb hole has worn off. I bought this knife off BladeForums in “Like New” condition, and it clearly was not like new. Disappointing, but given the price I paid and the fact I was going to use this knife I ultimately decided to keep it. However, the pictures you see here demonstrate that the gold finish is subject to wear.

The action of this knife is smooth thanks to a large pivot and phosphor bronze washers. Like most Cold Steel Tri-Ad lock knives, a good amount of force is required to open and shut the blade. This isn’t a blade you will be able to flick open. But you will find the action to be smooth and reliable, and that’s what I would expect from a rugged utility knife like this.

For lockup we have the aforementioned Tri-Ad lock. I’ve reviewed a dozen or so knives featuring this knife of lock, so forgive me if this sounds a little repetitive, but the Tri-Ad lock is a lock back reinforced with a stop pin. It’s an extremely strong lock design. The Tri-ad lock on the Golden Eye knife is no exception. You can’t muscle blade play out of this even if you try to move the blade out at the tip.

Here is a size comparison with another workhorse in my collection, the Buck Marksman. Still rocking the Marksman:

Cold Steel Golden Eye with a Buck Marksman

Disengaging the lock requires a good amount of force, but it’s not as bad as something like the 4-Max. Actually, I find the amount of effort it takes to open and close this knife to be reasonable. That said, this knife has been used quite a bit. Out of the box these can be stiff to open and close, so you may need to break your knife in.

Blade centering is perfect on my knife.

Cold Steel Golden Eye Review – Final Thoughts

Cold Steel has done it again. This is a strong and practical utility knife. It handles well, cuts like a beast, and features the strongest lock on the market. The “Golden Eye” (Hollow Thumb Ramp) works great. The HTR combined with the unique profile, gold hardware, and green handles help distinguish this knife in Cold Steel’s lineup. With so many great Demko designs on Cold Steel’s roster you would think that they cannibalize each other. The Golden Eye is a unique knife, even if it follows Cold Steel’s formula in many ways.

Where the knife may fall short is that this is another large folding knife from Cold Steel. It’s a great performer if you can carry and use this knife, but this isn’t a knife I can pull out at the office or the grocery store. It’s just too big. If I worked on a ranch or something this would be a great choice, but as a mild-mannered couch commando I usually carry a smaller knife. Also, the finger scallops in the handle won’t work for everyone.

That said, I found this to be an impressive knife. Especially the way it cuts. It’s a joy to cut things with this knife. Andrew Demko knows what he is doing and Cold Steel has a track record of executing his designs to brilliant standards. The Golden Eye is no different. Well worth seeking out if you like the design or are an unabashed Cold Steel fan like me.

[easyazon_infoblock align=”center” identifier=”B019RSXKXO” locale=”US” tag=”brdfkdfk-20″]

If you are thinking of buying Cold Steel Golden Eye, please consider purchasing it at [easyazon_link identifier=”B019RSXKXO” locale=”US” tag=”brdfkdfk-20″]Amazon[/easyazon_link] or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com and help produce future reviews. Thank you very much.

Filed Under: Cold Steel, EDC Knives, Folding Knives, Tactical Knives Tagged With: Andrew Demko, drop point, g10, hollow thumb ramp, made in Taiwan, S35VN, tri-ad lock

Demko Knives AD-15 MG Review

by Aaron Shapiro 5 Comments

There are knives that elicit feelings of elegance and delicate class, and then there are knives that make you feel like you’re carrying a tool that can handle damn near any task that you throw at it. Demko Knives belong solidly in the latter camp.

Demko AD-15 MG Review
Buy the Demko Knives AD-15 at BladeHQ

For those of you that are hearing the name Demko and it’s sounding familiar Andrew Demko is the designer of Cold Steel’s famed Tri-ad Lock as well as some of their (in my opinion) coolest designs. Demko has also maintained his own custom knife shop, producing well built heavy-use folders that kept that distinct look that made his name famous among knife aficionados.

Based on my experience knives from Demko’s shop directly were a little difficult to come by when I first started getting into custom pieces. I’m not sure if that due to his work with Cold Steel, or maybe just the circles I ran in… but recently Andrew did two things that changed this. First he developed a new lock, the scorpion lock, that is not available from Cold Steel and secondly, he developed his Machine Ground (MG) series.

Demko AD-15 MG

I would probably call his MG series mid-techs, although from what I have heard the only difference between Demko customs and the MG’s is the actual grinding of the blades themselves. Obviously his customs are hand ground, while the MGs are machine ground. More on that later.

First, the ever important specs of our Demko Knives AD-15 MG, the subject of this review:

  • Blade Length: 3.75”
  • Overall Length: 8.625”
  • Handle Thickness: .59”
  • Blade Thickness: .196”
  • Steel: S35VN
  • Weight: 6.4oz
  • Lock: Demko Scorpion Lock
  • Country of Origin: USA

(Please note these measurements are according to my ruler and calipers. The manufacturer’s listed measurements may vary.)

Blade Details

So, as I stated in the intro these knives are part of the “MG” series that the Demko shop is now putting out. I think the overall idea is to get some of their knives into customer’s hands without having to have the custom price-tag attached. In order to cut down on the cost, they have opted to put Machine Ground blades in these AD-15s. Apart from that I think there are minimal cosmetic differences between these and the customs.

Demko AD-15 MG Blade

So what does this mean for the end user? Well, nothing really. The knife is evenly ground, with crisp lines and a thin flat grind, and it is finished extremely well. For the run that was available at Blade Show, where I bought this knife, they had actually gone back and put a machine-satin or grind-line finish on the blade. This is generally my preference in a blade finish.

All that said, the knife came to me horrifyingly sharp, and I say this as someone that can sharpen a knife to a mirror–hair whittling edge. The Demkos did something to make this knife glide through paper like nothing I’ve seen. What makes this even more remarkable is the blade is made from 4.5mm thick stock. That is thick stock for a folding knife.

Demko AD-15 MG Edge

The steel choice is worth noting as well. S35VN is a weird pick for a knife that I’d consider a “heavy-use knife.” Don’t get me wrong as S35VN is generally a fine steel. I have it in my Chris Reeve knives and it’s performed great for me, but I would have expected 3V or M4 in this monster. Gimme something with some real brawn, Demko!

I suppose the choice of S35VN isn’t really a problem, as S35VN is still a premium steel with a well deserved reputation for all-round performance. It was just a surprising choice to me as this knife is otherwise entirely overbuilt. I think a tougher steel with a greater reputation for hard use would have been even better under these circumstances.

Demko AD-15 MG Blade Thickness

Handle, Ergonomics, and Pocket Clip

To address the elephant in the room before we talk about anything else, the AD-15 MG is a big knife. I mean the thing is over eight and a half inches long. However, as a result Demko was able to figure out how to incorporate a very effective saber-style handle to the knife. This allows you to grab onto it and know that you’re not going to slip anywhere, and to add additional traction most of these knives are offered in textured G-10 or Micarta for even more grip.

Demko AD-15 MG Closed

As for the handle material itself, it’s okay. Don’t tell anyone I said this, but I kinda wish I had gotten a G-10 version. The natural micarta has a raw edge that has turned out to not really be my favorite. His G10 knives were very nicely squared away, I’d love to see one in CF.

Demko AD-15 MG Ergonomics

The Demko’s are also now offering these knives in full Ti handles. This was debuted at Blade 2018. In my opinion full titanium is a lousy “upgrade” as it adds nearly $200 to the price tag and a lot of extra weight, but the full titanium version offers no additional operational strength.

Demko AD-15 MG Pocket Clip

The clip is a ho-hum spoon style three screw clip that straddles the lanyard hole. This placement makes the knife ride a bit high in the pocket. I love and hate this high clip placement. On one hand, it allows you to have a really positive grip on this (expensive) knife in your pocket when you withdraw it, but the knife is also is going to dig into your side when you sit down. So this clip configuration has its pros and cons.

Demko AD-15 MG in Pocket

Deployment and Lockup

Dudes, this lock is super weird. Like, I get it, and I like it, but it took me a solid 2-3 days of playing with it where I stopped nearly cutting myself when I tried opening it. The knife is not that different from the famed Tri-ad lock that Demko licensed to Cold Steel. It’s essentially a titanium bar that runs across the top of the knife, that bar pivots around a pin towards the rear, when doing so it lifts the locking pin and allows you to close the knife. That same spring tension also serves as the “detent.” As a result, you sorta have to push away from the pivot when you open the knife otherwise it won’t budge.

Demko AD-15 MG Lock

As I said, it’s a different but ultimately intuitive way of opening a knife. Another result of this lock is that the action of the knife has a very hydraulic feel to it. It’s smooth, but slow. As if you were pushing the blade open through soft butter. This isn’t a knife that you’re gonna “pop” open with your thumb. The AD-15 MG’s run on poly washers, so that contributes to the slow hydraulic feel of the action.

Demko AD-15 MG Scoprion Lock

Demko Knives AD-15 MG Review – Final Thoughts

How do you pin a bow on a knife this unusual? It’s a new style of mid-tech, with a new locking system, in a different size category than I normally buy. I never condone knife abuse, but the AD-15 seriously feels like a knife that could do pretty much anything and go pretty much anywhere. Need to stab through a car hood? No problem. This AD-15 MG is an absolute tank, and in that capacity this knife is phenomenal.

With a different steel I think the AD-15 MG’s would be perfect. S35VN is fine for a Sebenza, but for an overbuilt folder like this I’d love to see the jump to an even tougher steel like 3V. I believe that Demko has used different steels on the hand ground versions, so perhaps that will trickle down to the MGs eventually.

Also, these knives aren’t cheap. The base model (with G10 or Micarta) comes in around $675 and is readily available on BladeHQ or even Amazon. This AD-15 MG is a lot of money, but you’re essentially getting a custom Demko that has a blade that went through a double disk grinder. Practically speaking it’s very similar to what they’d call a “custom knife.” The hand ground version of this knife starts at $900, and if that’s if you can find one.

For these reasons, I recommend the Demko Knives AD-15 MG if you want a hard use folder from Andrew Demko without spending the cash on one of his full customs.

Editor: I recommend purchasing the Demko Knives AD-15 MG at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Collectable Knives, Folding Knives, Hard Use Folding Knives, High End Pocket Knives, Made in the USA Tagged With: Andrew Demko, micarta, S35VN, Scorpion lock

Cold Steel 4-Max Review

by Dan Jackson 8 Comments

This is a knife that requires little in the way of an introduction. The Cold Steel 4-Max is arguably the most overbuilt hard use folding knife of all time. Modeled after designer Andrew Demko’s custom 4-Max folder the 4-Max brings Andrew’s clean design and attention to detail to life.

Cold Steel 4-Max Review
Buy the 4-Max at BladeHQ

Buy on Amazon

This isn’t your garden variety Cold Steel offering. Built in the USA and retailing for about $400, this high end production offering is for those that want to get as close to an Andrew Demko custom as they can without buying and actual AD custom. I’ve wanted to check one of these knives out ever since they announced the project in 2014. 4 years later and I finally have one in hand.

Will the knife survive the hype? Read on to find out.

General Dimensions and Blade Details

The 4-Max has an overall length of 10.00″, a 4.00″ blade and weighs 10.2 ounces. This is a big honking knife. As you will be able to see in the size comparisons, if the Ultimate Hunter is a great white, then this 4Max is a megalodon. It dwarfs normal folding knives. It’s almost a caricature of a folding knife. It’s massive in every way. Some may view a knife this big as novelty item rather than an EDC. Personally, I like mine for trips to the supermaket and high stakes hostage negotiations.

Cold Steel 4-Max

My 4-Max is made in the USA, but Cold Steel has moved manufacturing over to Italy. They changed the G-10 from the tan shown here to a blue grey on the Italian version. Personally, part of the allure of the 4Max to me was that it was made in the USA. It’s a knife so ridiculous that it almost needs to be made in the USA. Otherwise it’s just an imposter. That said, my research shows the Italian 4Max is very nice, and possibly even a smidge better than this USA version in the fit and finish department.

The blade on this sucker is massive. It’s a simple drop point with a deep belly, high flat grind, and decorative swedge. The grinds are crisp and even. The edge has been evenly applied, although the sharpener did run up onto the choil a little. That seems to be consistent from knife to knife. I’m not a fan of how that looks, and is one of my gripes.

Cold Steel 4-Max Blade

You would think a knife this overbuilt would be a poor slicer, but the 4-Max actually has great blade geometry. It slices beautifully thanks to the high flat grind that gets surprisingly thin behind the edge. I can slice apples like nobody’s business with the 4Max. The tip also displays a good balance between strength and practicality. It’s stout, but isn’t a pry bar either. The knife is fully functional and surprisingly good at performing day to day tasks.

For blade steel Cold Steel went with CPM-20CV. CPM-20CV is Crucible’s answer to Boeller M390. It’s excellent stuff providing a covetable blend of edge retention, ease of sharpness, corrosion resistance and toughness. It’s a high end steel. So far it has done everything I’ve asked it to. Admittedly that has mostly been EDC chores including breaking down boxes, cutting fruit, and opening mail. I’m keeping this knife for long term evaluation and will update this section periodically.

Handle, Ergonomics, and Pocket Clip

The Handle of the 4-Max is G-10 over titanium liners with a titanium backspacer. Handle construction is solid. The G-10 scales have been nicely finished. All the parts line up, and the overall impression is solid.

Cold Steel 4-Max Handle

So far the tan G-10 has held up well. I’m not a huge fan of light colored G-10 as it tends to pick up dirt and stain, but I haven’t had that issue with the 4-Max.

The ergonomics of the 4-Max are excellent. This is a huge knife, so there is plenty of real estate, and Andrew Demko is well known for his simple and ergonomic designs that accommodate a variety of grips and hand sizes. The ergonomic features include a generous forward finger choil, lightly textured G-10 handle scales, and a short run of toothy jimping. The jimping is nice because it captures the pad of your thumb without being overly aggressive.

Cold Steel 4-Max Ergonomics

All the edges of the G-10 have been chamferred. I haven’t noticed any hot spots. The balance point of the knife is an inch or so behind the pivot, so it has a forward heavy feel. It all but begs to be chopped with, an odd sensation from a folding knife. The pommel is large and angular and could be used as an “impact tool” if the need ever arised. The 4-Max is also comfortable in a reverse grip.

Time to talk about the pocket clip. This is a large titanium pocket clip. It allows for right or left side tip up carry only. It’s not a deep carry clip, but it’s oriented so that the knife buries fairly deep in the pocket. Spring retention is excellent.

Cold Steel 4-Max Pocket Clip

In practice, this knife carries as you would expect. You need to wear a belt while EDCing the 4-Max, lest you wish to arrive at your destination in just your underwear. It’s big, it’s heavy, and it takes up a ton of space in your pocket. I wouldn’t turn up my nose at a belt sheath for this one.

Deployment and Lockup

The 4-Max makes use of large ambidextrous thumb studs. Quite a bit of travel is required to pop this blade open. Thankfully the going is smooth due to the massive phosphor bronze washers. When you finally maneuver the blade into the open position you are greeted with a hugely satisfying “click”. It’s kind of like closing the door of a German car.

Here is a size comparison with the Cold Steel Ultimate Hunter, a large knife in its own right.

Cold Steel 4-Max vs. Cold Steel Ultimate Hunter

For lockup we have an oversized Tri-Ad lock. It’s got a stop pin bigger than most pivots. Lockup is absolutely bank vault solid. Not a smidge of play here, and according to Cold Steel this lock can handle ungodly amounts of punishment. No complaints with respect to the lock.

Where I do have a complaint is when it’s time to unlock the knife. Tri-Ad locks can have a reputation for being tough to disengage, but this 4-Max takes it to a new level. Not only is a good amount of pressure required to release the blade (understandable), you have to position your thumb dead center on the lock release. If you travel too far forward or back, you won’t have sufficient travel for the lockbar to raise enough to disengage.

Once you get the lock disengaged extreme care needs to be taken with this blade. The spring tension turns the 4-Max into a guillotine of sorts. Care always needs to be exercised when closing a folding knife, but extreme care should be taken with the 4-Max. The combination of strong spring, heavy blade, and razor sharp blade make this one a little disconcerting to use. I’ve never felt nervous closing a pocket knife before, but after catching the edge of my ring finger in this blade I have a new level of respect for the 4-Max. Be careful.

Here is another size comparison with the hugely popular Spyderco Paramilitary 2:

Cold Steel 4-Max vs. Spyderco Paramilitary 2

Blade centering is good, but not great on my knife. It’s a mm or so off. No where near rubbing, but at this price point I would obviously prefer something dead centered.

Cold Steel 4-Max Review – Final Thoughts

The 4-Max is the closest most of us will come to ever owning an Andrew Demko custom knife. It was built without compromise, and in that respect the 4-Max is a roaring success. If you are looking for the biggest, baddest hard use folding knife on the planet then I think the 4-Max should be at the top of your short list. It’s beautifully made, and it cuts surprisingly well. And I challenge you to find a more solid folding knife.

My biggest gripe is it’s a tough lock to disengage. Not only is there a lot of spring tension, you have to place your thumb right in the center in order to successfully disengage the lock.

However, if you are looking for anything resembling a practical pocket knife for urban EDC then I think you should look elsewhere. This knife is huge and heavy. No way I would want to carry it around on a daily basis. But it’s a beautiful and unique piece and I appreciate it for what it is.

With the 4-Max, you are either going to love the idea of it or hate it. If you are somehow on the fence about the 4-Max I would suggest picking one up. It’s not cheap, but you get what you pay for.

Cold Steel 4 Max Folding Knife
Cold Steel 4 Max Folding Knife
  • CPM-20CV Steel
  • Pocket / Belt Clip
Buy on Amazon

I recommend purchasing the Cold Steel 4-Max at BladeHQ or Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Cold Steel, Collectable Knives, Folding Knives, Hard Use Folding Knives, High End Pocket Knives Tagged With: Andrew Demko, CPM-20CV, tri-ad lock

Cold Steel Pro-Lite Review

by Benjamin Schwartz 10 Comments

I was excited when Cold Steel announced the Pro-Lite. I like good knives, and I like cheap knives, and the Pro-Lite looked like it might check both boxes. And while there’s definitely a lot to say about Cold Steel’s behavior in the last few years, it’s nice to see a genuinely interesting budget knife from a company other than Kershaw.

Cold Steel Pro-Lite
Buy the Cold Steel Pro Lite at BladeHQ

Buy on Amazon

People talk about the Hinderer/KAI collaborations a lot but, really, the partnership between Cold Steel and Demko is where it’s at. Cold Steel’s affordability, competent machining, and quality materials complement the utility-driven Demko style perfectly. This harmonious pairing has allowed Cold Steel to first reinvent itself as a maker of reliable tools and not just oversized Mall Ninja props, and to move upmarket with compelling offerings in the mid-priced knife bracket.

That move meant there wasn’t really an entry-level Cold Steel knife anymore. Sure, there were a few cheap knives in the lineup, but they were all a little too corner case or niche to be representative of the brand. With the Pro-Lite, Cold Steel brings out a true modern CS design, at a low price. This is the Cold Steel budget flagship we were waiting for.

General Dimensions and Blade Details

The Pro-Lite has a blade length of 3 5/16”, a handle length of 4 ½”, and an overall length of almost exactly 8”. It is very light for its size, weighing only 3.2 oz, and is made in Taiwan.

Andrew Demko’s style is particularly adaptable to production knives. I think this is because his design philosophy is so practical. His blades are stylish, but that style derives from a commitment to utility. Every custom maker I’ve ever spoken to says they want their knives to be used, but few make this as obvious as Demko does. It also helps that his signature design element, the Tri-Ad Lock, is easy to implement in production knives.

Cold Steel Pro-Lite Blade

Generally, I prefer smaller knives. I’ve been trying to carry more larger knives to get a feel for the advantages they offer. For what it’s worth, I think the Pro-Lite’s size is part of its charm. This wouldn’t work as a smaller knife. The incredible ergonomics would be compromised, and the very nice blade shape would be altered, likely for the worse.

My Pro-Lite has a clip point blade, long and low-slung, similar to the Buck 110’s blade. I think I’m still a drop point boy at heart, but the clip point is growing on me. The Pro-Lite’s tip is just south of the pivot, and the blade is ground thin enough that you get a lot of a control. The hollow grind starts fairly low, but given the thinnish initial stock you have a good combination of sliciness and stability. This is a burly blade I can get behind.

Steel is interesting. As much as I would have loved to see Cold Steel’s erstwhile standby, AUS-8A, on the Pro-Lite, what we have instead is Krupps 4116. A less common steel, seen on a few of Cold Steel’s previous super-budget options like the Pocket Bushman. I’ve never had a knife with 4116 before, and my experience with it on the Pro-Lite has left me ambivalent. Edge retention seems to be below AUS-8A, and while it is rust-resistant, it has a splotchy finish that just looks weird. Even in the glamour pics on retail sites it looks bad. In the end though 4116 is serviceable and easy to sharpen, which is tantamount in an ‘everyman’ blade, as the Pro-Lite is designed to be.

Handle, Ergonomics, and Carry

Word on the street is that Andrew Demko was particularly fond of the Pro-Lite’s handle, and he has every reason to be. The ergos here are excellent. The bi-level sculpting puts your fore- and middle finger at a lower level than your ring finger and pinky, letting you pinch around the pivot for superlative control. The guard is pronounced enough to keep your hand from going forward, but shallow enough not to interfere with cutting. The beak at the back keeps your rear two fingers situated. This is one of the nimblest-feeling medium-sized blades I’ve ever handled.

Cold Steel Pro-Lite Handle

Other nice things: there is a slight contour to the scales. The orange peel finish is positive-feeling, but not Cold Steel Classic abrasive. The extra-large jimping on the spine of the knife is great for indexing. Overall proportions for a medium-sized knife are spot on. The Pro-Lite feels hardy and dependable without feeling comically overbuilt, and it has a rugged, Jean Claude Van Dammian swagger that some of the more cerebral heavy-duty knives lack.

Cold Steel Pro-Lite Ergonomics

The Pro-Lite is a little wide in the pocket, but it’s nothing catastrophic. At its widest point it’s still narrower than a PM2, and it’s nice and thin compared to something like a Voyager. I also heartily approve of the clip. Angled clips are one of my pet peeves, and I’m hoping that Cold Steel is moving towards straight, unadorned clips like this one in the future. Tension is perfect, length is just right, and it seems durable. I have no complaints here. It may not be a revelation in the pocket as it was in the hand, but the Pro-Lite still carries damn good.

Deployment and Lockup

Cold Steel cheaped out big time on the washers: big plastic affairs. The pivot feels cottony, and deployment is very slow. A lockback isn’t ever going to be the fastest opener in the world, but these cheap washers really gunk it up. Once the knife is broken in they’re serviceable, and I can just about flick it open now, but really, phosphor bronze washers would be perfect here, and even at $30 that isn’t asking for the moon.

Cold Steel Pro-Lite Pocket Clip

The Tri-Ad lock is here, and completely serviceable. I get the slightest amount of vertical play if I really wrench on the Pro-Lite, but it’s nothing to get upset about. For a working knife, the Tri-Ad lock is such a good choice. It’s dead simple to operate, requires no real maintenance, and is as unfinicky as they come. Worth noting, however, is that there are degrees of quality in Tri-Ad locks. This is a workmanlike variation, less tuned than the one on my Large Espada. If I flick open the Pro-Lite really hard the lockbar travels deeper into the notch on the tang and it takes some doing to unstick it. It doesn’t feel as dialed in as on a higher-end offering, but I don’t think it affects performance in the least.

Cold Steel Pro-Lite

Cold Steel Pro-Lite Review – Final Thoughts

The Pro-Lite makes a lot of sense for Cold Steel 2016: when most of their line was in the $40-60 range, they would undercut themselves with something like this. Now that they’ve moved upmarket, they can introduce a blade for somebody interested in their design ethos and the Tri-Ad lock, but without the money to spend on higher-end options. And, in the budget knife world, I think the Pro-Lite can compete with the all-time greats in the price bracket: the Drifter, the Tenacious, the Cryo.

If they made a Pro-Lite with contoured G-10 scales, CTS-XHP steel, and tighter fit and finish, I would gladly pay $120 for it. And you can’t always say that you’d be interested in higher-end versions of budget knives. A Drifter wouldn’t be all that interesting against more the diverse competition in the high-end market. It’s too generic. The Tenacious fails to impress next to the Native 5, or even the Delica. But I like the Pro-Lite design better than the Voyager or the Recon 1.

There is no dearth of cheap knives in the world, but there are precious few that we will remember in five years. There are budget knives that are good budget knives, and budget knives that are good knives. The Pro-Lite falls into this second, much smaller category. This is a great design, full stop. It is quite an accomplishment, and even amongst the string of great knives Cold Steel has been releasing, it stands out. Its own flaws can’t stop the design from shining through either. For $30 this is an easy, easy recommendation.

Cold Steel Pro Lite Clip Pt. 20NSC Pro Lite Clip Pt. Black
Cold Steel Pro Lite Clip Pt. 20NSC Pro Lite Clip Pt. Black
  • Pro-lite features a high satin Polished 4116 stainless steel blade
  • Equipped with our groundbreaking TRI-AD locking mechanism for added safety and strength
  • Pro-lite has withstood all of the grueling and torturous quality control tests that Cold Steel is famous for! if you are looking for a tough, high performance folding knife that won't break the Bank
$28.99
Buy on Amazon

Editor’s Note: I recommend purchasing the Cold Steel Pro Lite at Amazon or BladeHQ. Please consider that by purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Filed Under: Cold Steel, EDC Knives, Folding Knives Tagged With: 4116, Andrew Demko, made in Taiwan, tri-ad lock

  • Go to page 1
  • Go to page 2
  • Go to Next Page »

Primary Sidebar

Follow Us on FacebookFollow Us on TwitterFollow Us on YouTubeFollow Us on RSS

Subscribe to Email Updates and Never Miss a Review (No Spam)!

Enter your email address:

Delivered by FeedBurner

Shop BladeHQ

Shop Outdoor Gear on Amazon

Shop KniveShipFree.com

Search BladeReviews:

Best of BladeReviews:

Best EDC Knives
Best Survival Knives
Best Tactical Knives
Best High Value Knives

Copyright © 2023 · Log in