Knives By Purpose

Kershaw Bareknuckle Review

It’s been a long time coming. The Kershaw Bareknuckle is the latest iteration of a knife design that has been churning between sister brands (and rival companies) since Zero Tolerance unveiled the 0777 back in 2011. It’s also something of a new flagship for Kershaw, who haven’t introduced a moderately priced, USA-made, manual action folder since the Skyline hit the market more than a decade ago.

Buy the KershawBareknuckle at BladeHQ
Buy on Amazon

I was excited to get my hands on a Bareknuckle. From afar, it looked like a winner: a covetable design, made well, at a competitive price. Does it deliver? Let’s take a look.

General Dimensions & Blade Details

The Bareknuckle takes the muscular design of the 0777 and wrings out all the water weight. Its slimmed proportions give the knife a lean, sinewy look: still stylish, just more severe. They also make the Bareknuckle feel neatly compact, especially when closed.
Open, the blade measures 3.6 inches and every bit of it is usable edge. The plunge grind intersects the sharpening choil tidily, and the geometry of the handle allows the edge to stretch almost all the way to the oversized pivot. Compared to the Spyderco Endura (or Pacific Salt pictured below), the Bareknuckle has more usable blade length despite being a half-inch shorter overall.

Although the blade shape is unlike anything else I’ve ever used, I came to like it quite a bit. If I had to classify it, I’d go with “modified wharncliffe.” The edge is mostly straight except for a short, slight kink right in the middle. It doesn’t cut with the effortlessly precise tip control of a true wharncliffe, but it also isn’t anywhere near as inconvenient to work with on a plate or cutting board. Thanks to a high flat grind and reasonably thin blade stock, it slices quite well. Overall, it’s a nice compromise for a general-purpose EDC knife, especially if you want a pointy tip that isn’t so delicate you have to baby it.

Interestingly, I found the Bareknuckle’s unusual blade shape particularly easy to sharpen. The straightaways at the tip and heel of the blade made it simple to register the edge against a stone, and the belly (always a challenging part for me) was small enough I didn’t even get a chance to struggle. It helps that the steel here, Sandvik’s 14C28N alloy, is a real joy to sharpen. It doesn’t have the brute wear-resistance of a high carbide steel, but it takes a positively crispy edge without much fuss.

Handle, Ergonomics, & Pocket Clip

KAI have been riffing on this handle design for years now, and I can see why they keep coming back to it. The angular “humpback” in the spine keeps the flipper tab out of the way when closed, and provides a comfortable concavity for the thumb to rest in when open. The finger choil doubles as a cutout to access the sub-frame lock, and stops the knuckles from riding up against the flipper tab. The milled lines in the handle give the smooth anodized aluminum a pleasant tactility, and flow nicely with the facets of the blade.

There’s not a millimeter of wasted space anywhere on the Bareknuckle’s handle. It’s so tightly matched to the blade – and the blade has so much edge – that folding the thing up feels like some trick of non-euclidean geometry. In use, I found myself wishing for either a little less blade length or little more handle. The tip feels awkwardly far away in a saber grip, and the way the handle tapers through the palm feels slightly insubstantial, though not uncomfortable. I preferred using it in a pinch grip, which the concave pivot accommodates perfectly.

Pocket clips have always been KAI’s biggest bugbear. They make so many variants I’m sure some of them are fine, but all the clips I’ve experienced from the company were either functional but odd (Leek), mediocre (Cryo, ZT 0801), or good but borrowed from another designer entirely (Strider, Emerson, Hinderer collabs).

As for the clip on the Bareknuckle, well, it can be great. Just not the way it comes from the factory. Fresh out the box it had too much spring tension to work predictably without an assist from the other hand holding the pocket taut. Luckily, it’s a dead-simple fix: some careful prying from my Victorinox Bantam’s combo tool and the clip now slides onto my pockets thoughtlessly. The Bareknuckle actually carries quite well – it’s lightweight for its size at just 3.6 ounces and slim enough to tuck out of the way.

Deployment & Lockup

The Bareknuckle employs KAI’s sub-frame lock: a heavy-duty lock bar integrated into a lightweight handle. Combining the rigidity of a frame lock with the weight savings of a liner lock is an appealing idea, and the tech is admittedly cool-looking. I just think it’s a bit over-engineered. Other than maybe a marginal increase in strength, I don’t see what advantages a sub-frame lock has over an inset liner lock.

And unfortunately, a sub-frame lock is also susceptible to the same problems as a typical frame lock. Since the lock bar is exposed, it’s easy to unintentionally put pressure on it, pushing the detent ball into its hole and ultimately making the blade harder to deploy. When the Bareknuckle was new the detent was punishingly stiff – there were times I absolutely could not open the knife, especially if my hands were wet or sweaty.

Thankfully, after a few weeks it broke in dramatically. The lockbar lost its sensitivity to pressure, and the detent was tempered. Little details here – like the “landing pads” for your finger behind the flipper tab – go a long way towards making the lengthy break-in period more agreeable. Now the action is every bit as crisp, confident, and fast as anything from Zero Tolerance.

Kershaw Bareknuckle Review – Final Thoughts

I mentioned it once already, but it bears repeating: the Bareknuckle is the first USA-made Kershaw to eschew assisted opening in over a decade. The knife market looks very different than it did ten years ago. Consumer expectations have changed. Chinese startups are jockeying for position against American stalwarts. Social media has given knife enthusiasts a louder voice than ever. The Bareknuckle is undoubtedly a product of these pressures: a manual action ball-bearing flipper, competitively priced, with a famous (among knife nerds, that is) design heritage.

The Bareknuckle is the most appealing iteration of the 0777 yet. If you like the design, you shouldn’t hesitate to buy it; it’s worth the $60-$70 asking price. But as much as I appreciate the knife, I don’t think it’s going to be the one to break Kershaw’s Speedsafe habit – it requires too much patience and practice for a knife novice. For all the griping they elicit from enthusiasts, at least Speedsafe knives don’t ever need to be held a special way to work properly. Still, the Bareknuckle is a good knife, and a leap in the right direction for Kershaw.

Kershaw Bareknuckle Pocket Knife (7777); 3.5-Inch Stonewashed 14C28N Steel Blade; 6061-T6 Anodized Aluminum Handle; KVT Ball-Bearing Opening; Flipper; Sub-Frame Lock; Reversible Pocketclip; 3.4 oz

Classy, exciting, matte gray 6061-T6 anodized aluminum handles distinguish the knife amongst others. The striking color combination and contrast is impressive and sure to catch the eye of an admirer
Opened manually the old-fashioned way, the KVT ball-bearing opening makes the Bareknuckle smooth, safe, secure, fast, quick, convenient, and protective to deploy
The all-black, black oxide coated hardware along with the intricate, oversized pivot adds to the interest and stunning design of the knife. A slim backspacer adds another element of classic style
Sandvik calls 14C28N the overall highest performing knife steel and still maintains the productivity benefit of being fine-blankable. The strong blade with a long, piercing tip defines the knife
The stonewashed finish on the blade offers a rugged, tough, worn-in, roughed up look that works to hide fingerprints, dirt, scratches, use, wear and tear

Editor: I recommend purchasing the Kershaw Bareknuckle from Amazon or BladeHQ. Thanks for reading.

Bestech Fanga Review

by John Burridge Leave a Comment

I love me a big knife. I particularly love a big, well designed knife. I recently acquired two similar big folding knives, and I’m going to do a full review of one and complain about the other one.

Buy the Bestech Fanga at BladeHQ

The Bestech Knives Fanga is the newest design from Polish knife designer Grzegorz Grabarski (AKA Kombou on Instagram), who’s on a real hot streak lately. In the last couple of years, a total of seven of his designs have been produced by BRR Knives in Poland, Custom Knife Factory in Russia, and five models from Bestech in China. Bestech’s website describes their company as “a professional manufacturer and exporter of medium and high quality knives in China for OEM in the past 10 years.”

I had never heard of Bestech until about a year ago, but apparently they’ve been making knives for other brands for a decade. Everything I’ve seen of theirs has been very well made, particularly the Bestech Malware, which I previously reviewed. The Fanga is also his least expensive folder to date, with the G10 handled version retailing for $80 and the carbon fiber/G10 version (the subject of this review) for $102 at BladeHQ.

General Dimensions and Blade Details

The Fanga is indeed a big knife at 9.375 inches (238 mm) open, weighs 4.75 ounces (135 grams), and has a 4 inch (102 mm) clip point blade that brings to mind a scimitar or Bowie knife. Research into scimitars and Bowie knives led me down a very deep internet rabbit hole, and when I climbed out I had two salient pieces of information:

1) curved blades are designed to aid in draw cuts, where the blade is being pulled across what it’s cutting. The outward curve of the blade not only provides a longer surface area to cut with than a straight edged blade of the same overall length, but the curved shape is also ergonomically designed to cut deeper than a straight blade when using a slashing motion. And

2) searching for information on Bowie knives led me to YouTube videos of the Mountain Dew drinking maniac Tom O’Dell on the QVC Cutlery Corner cable TV show from the late 90’s / early 2000’s. He would say “bowie” a hundred times an hour with amazing enthusiasm: “We have a set of 14 B o o o o o – ee knives with genuine jigged stag bone handles and top quality mirror polished stainless steel for only $39.99!” I have fond memories of watching that show at 2am in the 90’s- and now, even without the bong, it’s still captivating viewing.

The blade has 3.875 inches (98 mm) of sharpened edge, and it’s made of D2 tool steel. D2 was patented in 1927, and was primarily used for industrial cutting tools until the mid 1960’s when it started showing up in high-end knives of the time. D2 is a good middle of the road steel. It’s not quite rust-proof stainless steel (not enough chromium), it’s not as fine-grained as modern powdered steel (not easy to sharpen to a fine edge), but on the upside it’s a pretty “hard” steel, meaning it can take a lot of abuse without deforming. That quality of hardness gives D2 good edge retention, but is notoriously hard to sharpen to a very fine edge. I’ve been able to get a good sharp edge on mine using my Wicked Edge sharpener, but I had to resort to using a very coarse 400 grit stone to smooth out some slightly rolled sections of the edge. I usually only need much finer grit stones like 800 and 1000 grit for touch-ups on knives with premium modern steels.

The last decade has seen an explosion of new varieties of blade steel, and I think I know why. I started getting into pocketknives in the late 90’s when my father got me the Spyderco Civilian I’d been wanting for my birthday- thanks again Dad! I told him to go into Chicago Cutlery and ask for the scariest looking knife in the store- which, in 1997, was unquestionably the Civilian. The blade was stamped “GIN-1 STAINLESS”. This was towards the end of the pre-internet dark ages, so investigating the blade steel meant a trip to the library and checking out a book on metallurgy. So I lazily assumed whatever steel knifemakers used was the most appropriate steel.

I didn’t think much about it until 2012, when I bought a DPX Gear HEST/F with a D2 tool steel blade, which sounded really cool. I decided to look up the comparative properties of D2 online, and was shocked to learn that D2 wasn’t the greatest blade steel ever invented. Between 1997 and 2012, the internet had matured into a snarky criticism/pornography e-commerce platform that highly values new products. I learned about S30V and many other new blade steels that were becoming popular thanks in no small part to the internet’s hunger for new, improved things.

So, to keep up in modern business, new powder metallurgy “super steels” like M390, S110V and Vanax 37 have become the steels of choice for high-end knives. Now, D2 blades are generally relegated to lower-priced knives. In fact, the last D2 steel knife I bought was the OKC Carter Prime, which was disappointing in so many ways. But the Carter Prime is not the knife I’m going to complain about…

Handle, Ergonomics, and Pocket Clip

The G10/carbon fiber handle is long, fat, and heavy, and fits my medium-large hands very well. As my daily EDC over the last month and a half, I’ve done a lot with it. I prepared an entire BBQ meal with the Fanga. It’s blade shape and the fact that the blade edge is higher than the bottom of the handle preclude it from being good at dicing onions, but it hacked open the packaging on the sausages and sliced the rolls just fine.

I needed to chop down a recently deceased banana tree in my yard, and why use a saw or machete when I have this bigass knife in my pocket? It was like cutting through seven inches of tough, soggy celery, and I gained a practical appreciation of the handle size and shape. The index finger cutout, along with the wide, flat thumb rest above the pivot, gave me surfaces to push and pull against as I sawed the banana trunk into sections that would fit into my yard waste bin. Afterwards, the knife and I were covered in bitter banana sap, so I cleaned us both with a garden hose. I was hoping that the Fanga’s machined G10/carbon fiber handle and G10 backspacer would be less slippery when wet than an all-titanium handled knife, but it was about as slippery as my titanium Sebenza.

Most of the time G10 appears on folding knife handles, it’s a flat slab with a square grid pattern molded or machined into the surface. It feels great and provides excellent traction, but looks boring. Notable examples of this are a lot of Spyderco knives, the Rick Hinderer XM series of knives, and pretty much every Emerson knife. But on the Fanga, this material is sculpted in a creative, organic way you that you feel more than you see.

Kombou, the designer of this knife, has added his signature design cue of several little scalloped cuts on the top of the handle behind the pivot. I’ve noticed this design in four of his other knives (the Ornetta, Volta, Kamoza, Bragga, and Buwaya) and I now notice a signature naming convention as well- all of his knife names end with an “a”. I really like his design aesthetic. It’s not quite as distinctive as knife designer Elijah Isham’s style but I find Kombou’s knives to be more practical. Like Isham, Kombou does 3D computer design, not physical knife making, and a close examination of the Fanga reveals many well-executed small details, like the deep blade fuller that can be used to open the knife like you would open a traditional slipjoint.

The pivot collar and the pocket clip are made of the same blue anodized titanium, and both have style. The pivot collar is subtly cone shaped, and the angle at which it rises above the handle matches the angle of the pivot screw, resulting in a volcano shaped pivot. The clip has a unique organic shape that compliments the shape of the handle. It also has a sufficient height above the handle to easily slide onto both my thickest denim jeans and my Triple Aught Design Force 10 AC pants which are extremely thin, but indestructible. The amount of flex in the clip has held on tight to everything I’ve worn in the six weeks I’ve been carrying the Fanga.

I scratched the anodizing on the clip somehow, and the blue anodizing is showing some fading on the edges. My Fox Knives Phoenix has similar blue anodizing and even more pronounced wear, but that’s also not the knife I’m going to complain about…

Deployment and Lockup

The Fanga stays open by utilizing a steel liner lock, which contributes to it’s weight. As D2 steel has gone out of fashion in high-end knives, so have liner locks been replaced by frame locks. I personally love a well done liner lock because it allows the handle design to be symmetrical in shape and materials. A frame lock knife, like the Chris Reeve Knives Sebenza, by definition must have a steel or titanium handle on one side that functions as it’s locking mechanism.

The design of the “lock side” of a typical frame lock knife is dominated by the lock. If a knifemaker wants to use a material other than steel or titanium for the non-locking side of the handle (the “show” side) they can use G10 or micarta or solid gold, but there’s no way to have symmetry of materials on both sides of the handle unless you use steel or titanium. Thanks to it’s liner lock, the standard Bestech Fanga has symmetrical G10 (or G10/carbon fiber) handles on both sides.

The lockup is solid with no blade wiggle, and the combination of the wide, heavy handle and thick blade stock prompted me to test the overall strength of the knife. My banana-watering garden hose burst at one end so I seized the opportunity to cut it with the Fanga. It took all my strength to cut through the extra-thick hose, so for the sake of science I sharpened it and cut a couple more slices much more easily.

The Flipper detent is a little stronger than I’m used to, meaning that it takes a bit of effort to get the flipping motion started. Once past that initial resistance it flips open smoothly on it’s ball bearing pivot system. It’s a big heavy blade and the detent feels appropriate to get that much mass moving and locked into place. I have never failed to completely flip it open using a normal index finger technique or by my wrapping my thumb over the top like a front flipper knife.

Every surface on the Fanga that’s able to be touched is chamfered or rounded a little bit, with the exception of a sharp two inch portion the back side of the liner lock, which is a) only exposed when the knife is locked open, and b) not sharp enough to cut you anyway. I would call that a design flaw, but that’s nothing compared to the design flaw of the knife I’m going to be complaining about, the Spyderco Tropen.

On paper, the Tropen is practically the same as the Fanga with the exception of the Tropen having better blade steel. Their weight, handle size and shape, blade size and shape, and full flat grind are very similar to each other. It’s in the differences between them where the Tropen falls short. The flipper tab’s pointy top jabs into your finger, the polished G10 handle scales are slippery even when dry, and the liner lock that keeps the knife open is only 1mm, while the Fanga’s liner lock is almost double the thickness at 1.8mm. In the picture it looks like the liner locks are the same size, but I bought digital calipers specifically so I could bitch about this and I assure you the measurements are accurate.

I also replaced the pocket clip with a $26 MXG Gear deep carry clip, but that was an aesthetic decision on my part. In my opinion, Spyderco knives are like Glock pistols: they’re usually OK right out of the box, but if you really want to get the most out of them, you have to install some aftermarket accessories and tinker with them a little. My Tropen had two serious problems when it was in the closed position that definitely required some tinkering.

First, the detent keeping the Tropen closed was so weak that it opened in my pocket several times. To remedy that, I turned to YouTube and learned how to increase the detent by taking the knife apart and using a dremel tool to enlarge the hole that the detent ball rests in. The second problem has perplexed me and the knife nerd community in general- when the knife is closed, there’s a half inch of sharp blade exposed next to the lock mechanism. The only fix is to dull the back end of the blade with a file. I haven’t cut myself on it yet, and I’m leaving the end the butt end of the blade sharp just to see if it actually does cut me while I’m holding it in my pocket. I’m willing to trade the pain for the knowledge.

Finally, the Tropen costs about $100 more than the Fanga. The only reason I bring up the Tropen at all is to make my final point about price versus value.

Bestech Fanga Review – Final Thoughts

Warren Buffett said this about price versus value:“Long ago, Ben Graham taught me that ‘Price is what you pay; value is what you get.’ Whether we’re talking about socks or stocks, I like buying quality merchandise when it is marked down.” When I first held the Fanga in my hands, I was surprised that this knife only cost $102, and the regular G10 version $80. The fit and finish, at least to my untrained eye, are excellent. That’s a lot of value at a low price. There are many quality knives out there that cost approximately the same amount, but I haven’t seen one that has this much style and meticulous detail plus a milled pocket clip at this price.

I bought the very similar Spyderco Tropen (which is also made in China by the way) for approximately double the price, and it ended up costing me even more in parts and labor. Despite it’s higher price, I feel like it’s value is significantly lower than that of the Fanga. The Bestech Fanga is, in my opinion, a great all-around knife and a tremendous value for the money. I recommend it.

Lastly, while fact-checking this review with the designer, Kombou, he told me that he has recently quit his regular 9 to 5 job to become a full time Product Designer for Bestech. My congratulations to him and to anyone who gets paid to do what they love. Keep making cool knives (with good value) and I’ll keep buying them.

Bestech Knives Fanga – From $102.00
From: BladeHQ

Editor: I recommend purchasing the Bestech Knives Fanga at BladeHQ and Amazon. Thank you very much.

About the Author: This guest review was written by John Burridge. John Burridge is a Los Angeles-based lover of knives and other dangerous toys. He spends his days trying to make the world a better place by slipping subversive humor into reality TV shows. And playing with cats. He can be found on Instagram as @bunrudge.

Cold Steel Bush Ranger Lite Review

by Josh Wussow 4 Comments

Time to face it, fellow knife nerds – We’re living in an era of over-saturation. With so many companies releasing a deluge of new designs, it’s difficult to pluck the hits from the static. But after months of blade malaise, something interesting caught my eye – A cheap, rugged looking, aggressive green monster with a nifty locking mechanism. It’s the Cold Steel Bush Ranger Lite, a budget iteration of the company’s $200-plus outdoor original. After several months of testing, one thing’s for certain: Of all the Cold Steel knives I’ve handled, the Bush Ranger Lite is definitely the Cold Steel-iest.

Buy the Cold Steel Bush Ranger Lite at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

As you’d expect from a sub-$30 knife, Cold Steel has chosen fairly basic materials. The handle is comprised of 4.875-inches of Outdoor Green GFN, measuring more than half an inch thick (0.65”). The flat ground 8Cr13MoV blade features a satin finish along the length of its 3.5-inches, with a tallness of 1.75 and a thickness of 0.65, respectively. Overall length and weight sit at 8.375-inches and 4.8-ounces. The forward swedge flows gracefully into a bowie-style clip point, giving the Bush Ranger an elegantly aggressive appearance.

If these handle scales look familiar, you’re not wrong. The Bush Ranger’s outline is very similar to the Cold Steel Finn Wolf, a Scandi-ground folder I reviewed a couple years back. If you squint, these are almost the same knife. But while the Wolf’s grind lands it in the outdoors-only curriculum, the Bush Ranger’s mandate is decidedly more gen-ed.

But speaking of outdoor credentials, here’s an interesting note – The Bush Ranger Lite will strike a ferro rod. Even in a closed position, this pocket knife is more than capable of casting sparks. This is certainly safer than previous folders I’ve used to make fire, since I was always concerned about applying force to the back of the blade.

Handle, Ergonomics, and Pocket Clip

The Bush Ranger fits perfectly in my medium/large sized hand. The hook on the back end rests perfectly against the heel of my palm, creating a feeling of security. Balance is good, and at no point did I encounter any hotspots.

Despite the squared-off spine, the backside of the Bush Ranger’s blade provides a generous, comfortable place to rest your thumb. There are some rough edges on the underside of the GFN, but nothing out of bounds for this price range.

The pocket clip is small, tight, and unobtrusive. This is by no means a deep-carrying tool, but the clip performs adequately and disappears against my palm when the knife is in use. There’s no flat resting surface under the tongue, however. This means that your pocket seam will be slowly digested as it drags across the textured handle. Cold Steel has also opted for tip-up only carry, reversible to the left or right side. This, along with the lefty-friendly nature of the lock, makes this a truly ambidextrous knife.

As for the actual ride, the knife carries surprisingly, well, Lite. Don’t get me wrong – The footprint is massive. It shared my right front pocket with my wallet and pen, and there was no mistaking its presence. That being said, the airy nature of GFN made this an area problem only, not a question of mass. It was also surprisingly benign in daily activities, such as walking, sitting, and climbing ladders. At no point did I feel that the Bush Ranger limited my flexibility. Until reaching for my wallet, of course.

Deployment and Lockup

For the longest time, the keystone of the Cult of Lynn Thompson (h/t Advanced Knife Bro) has been the sacred Tri-Ad Lock. Of all the mechanisms in the hobby, this one seems to have the most fervent devotees. While the Bush Ranger Lite isn’t technically a member of the Tri-Ad tribe, it does boast another interesting innovation from Cold Steel – The Rocker Lock. That’s the sliding piece you see on the show side of the blade. Here’s a look at it stripped down to bare metal:

As the breakdown confirms, the Bush Ranger is lacking the signature stop pin of the Tri-Ad. However, the Rocker’s additional sliding stop adds a sense of solidity to the traditional back-lock mechanism.

I will say this – This knife benefited greatly from its initial disassembly and maintenance. It was noticeably stiff out of the box, running dry on its Teflon washers. Some cleaning and a little oil worked wonders, and the Bush Ranger became a much smoother operator. The CLACK its lock snapping into place is a mildly addictive sound.

Closing can be a bit trickier. Cold Steel’s locks are notorious for their stiffness, and this is no exception. And because of the lack of a forward finger choil, this is really a knife that requires two hands in order to close safely. Otherwise, you risk shaking that sharp edge down into you knuckle, which would only be exacerbated by the tendency of back-locks to snap shut with authority.
In daily use, I found this to be an eminently capable all-around cutter. From food prep to package duty, the Bush Ranger was a solid companion. But this is a Cold Steel, after all. So, what sort of tester would I be if I didn’t at least attempt to baton with it?

The surprise isn’t that the knife got stuck. I intentionally used a piece of wood that was larger than a pocket knife should be able to tackle. The shock was what happened after I hammered, pulled, and pried the Bush Ranger loose. I disengaged the rocker tab, pressed down the back-lock, and the knife closed as though nothing had happened. I opened and closed the knife several times, just to be sure I wasn’t losing my mind. Blade play? Zero. Centering? Dead-on. Not even so much as a roll on its 8Cr edge. The FRN handle held up to the prying as well, with no new gaps developing around the back spring.

Here is a parting size comparison with the Spyderco Native 5 and Mora Companion:

Cold Steel Bush Ranger Lite Review – Final Thoughts

The Bush Ranger Lite is, without question, the toughest budget blade I’ve come across. It’s rugged, well built, and perfectly suitable for everyday abuse. And from a sheer bang-for-buck perspective, I’m not sure there’s another knife under $30 that gives you this much blade, handle, and versatility. Sure, the materials are basic and the design isn’t for everyone. And if you spend even part of your time in an office, it probably isn’t the blade to use in the break room. I certainly raise a few eyebrows when I pulled this clip-point monster out of my pocket.

But under almost any other circumstance, the Bush Ranger Lite is a heck of a tool. Buy one, beat the heck out of it, and get another if it breaks. Overall, I this is an outstanding budget effort from the cult of Cold Steel.
Links

Sale

Cold Steel Bush Ranger Lite 3.5" 8Cr13MoV Blade 4.875" GFN Handle Everyday Carry Hunting Folding Knife w/Rocker Lock - Boxed

DURABLE BLADE - The Bush Ranger Lite folding knife features a 3 1/2" Sheffield clip point blade; Crafted from durable 8Cr13MoV steel, this blade strikes a balance between sharpness and resilience, making it an excellent choice for various cutting tasks
COMFORTABLE HANDLE - Comfort is paramount in the Bush Ranger Lite's design - The handle is expertly contoured and made from glass-filled nylon (GFN), providing a secure and comfortable grip; The ergonomic design ensures extended use without discomfort
EASE OF OPENING - Designed for practicality, the Bush Ranger Lite incorporates a thumb stud for quick and effortless blade deployment; This feature ensures easy access to the blade, allowing for swift and efficient use in a variety of situations
ROCKER LOCK - Prioritizing safety, Cold Steel equips the Bush Ranger Lite knife with a state-of-the-art rocker lock; The inclusion of a secondary safety feature enhances resistance to shock and impact, ensuring a secure and reliable lockup during use
SPECS - Weight: 5.2 oz (147.4 g); Blade Thickness: 3.8 mm; Blade Length: 3.5"; Blade Steel: 8Cr14MoV Steel; Handle Length/Material: 4.875" GFN; Overall Length: 8.375"; Knife Type: Folder; Blade Shape: Clip Point; Locking Mechanism: Rocker Lock

Editor: I recommend purchasing the Cold Steel Bush Ranger Lite from Amazon or BladeHQ. Thanks for reading.

Cold Steel AD-10 Review

by Seth Vietti 5 Comments

Of all the words used to describe Cold Steel knives here on BladeReviews.com, “refined” isn’t at the top of the list. That’s not a metaphor – I literally made a list, and “refined” only appears three times. You’re much more likely to see Cold Steel knives described with adjectives like “strong” (41 times), “large” (39 times; followed closely by “big” at 38), and “comfortable” (26).

Buy the AD-10 at BladeHQ

Buy on Amazon

Speaking as a former Cold Steel skeptic, I was unsurprised to find that the AD-10 is indeed strong, large (big), and comfortable. What did surprise me was just how good this knife is. It delivers the essence of Cold Steel, refined. It might be the best knife they’ve ever made. And if you, like me, ever scoffed at Cold Steel’s marketing or rolled your eyes at their product names, read on, because the AD-10 will catch you off guard.

General Dimensions & Blade Details

The proportions of this knife are deceptive. Yes, it’s big, but the wide handle, snubnosed blade, and protruding backspacer make it look even bigger – as if there’s another knife trapped in there, bulging through the seams trying to get out. Makes sense, considering the AD-10 is a downscaled version of designer Andrew Demko’s gargantuan 4-Max. Here it is filling out a Spyderco sandwich, between the longer Military and shorter Paramilitary 2:

The AD-10’s blade is clearly optimized for strength. The tip is wide, thick, and feels practically unbreakable. It penetrates more like an armor-piercing round than a needle, meaning it’ll get you into just about anything so long as you don’t care what kind of hole you leave behind. Behind the tip, the grind thins out quickly to a relatively thin edge thanks to a nicely executed hollow grind. Don’t let anyone tell you that thick knives can’t slice – the AD-10’s substantial 3.9mm blade stock and deep hollow grind work together like a zipper, holding material apart from the blade after the edge separates it. Compared to a full flat ground knife of similar stock thickness, the AD-10 carves through cardboard with noticeably less friction, powering through the nasty two- and three-ply stuff rather than getting wedged in.

There’s no avoiding the laws of physics, however: a hollow grind can only do so much for a knife this thick. It’s graceless in the kitchen, where the tip mashes more than it pierces, and crisp produce is split, not sliced. Then again, the AD-10 isn’t anyone’s idea of a kitchen knife. For more utilitarian cutting it works with surprising agility, despite looking like a wrecking ball.

The blade steel, S35VN, has performed well for me. Edge retention has been good; stainlessness, excellent. As for toughness, it did not disappoint. I took the AD-10 on a hike and ended up using it to trim back a bush that had overgrown the trail. A careless chop glanced into a stone, damaging the edge where it hit. Thankfully, the steel was tough enough to roll, not chip, so the damage was easy to sharpen out.

Handle, Ergonomics, & Pocket Clip

At just over three and a half inches long, I wouldn’t call the blade oversized. The handle, though, is another story. Even if you ignore the extended pommel, it still measures in at 5.25 inches. For perspective, that’s almost as much handle as the Spyderco Military, with about as much blade as the Para 2. Yeah. If you’re someone who obsesses over high blade:handle ratios, this isn’t your knife. To top it off, the AD-10 is bulky, too; easily eclipsing my heretofore thickest knife, the Victorinox Alox Farmer.

These comparisons aren’t complaints. Because the AD-10 is the most comfortable folding knife I’ve ever used. Andrew Demko is a master of ergonomics. You’d think a knife with this many finger grooves – plus a front and rear guard – would feel awkward to move around on, but the AD-10’s smooth and deeply sculpted handle isn’t so prescriptive that you feel locked in to any single grip.

The pocket clip is wide, polished, and barely noticeable in hand. The lock bar and backspacer leave no palm-pinching voids in the back of the handle. Every edge, every corner is shaped or softened. It all feels very purposeful, allowing you to exert more force with less strain – this is a knife that makes “hard use” feel easier. One ergonomic caveat: the forward finger choil might be a little cramped for thicker fingers, although I didn’t have any issues.

The unavoidable problem with a knife this fist-filling is how awkward it is to carry in a pocket. I mean, it’s 6.8 ounces and thicker than a coin purse on laundry day. I can deal with large knives (see my review of the Spyderco Hundred Pacer), but the AD-10 stretches (literally) the capacity of my pockets. If you wanted to carry it in your waistband, you’d probably need to buy bigger pants. Even though it hurts to suggest something so shamefully uncool, your best option might actually be a belt pouch.

Still, despite the weight and bulk, I’d pick the AD-10 for my pocket before any of the other Cold Steel folders I’ve owned. The clip – while it could use a little more “ramp” at the lip to help it over thick seams – is an improvement over the too-short, too-stiff, death grip clips I’ve struggled with in the past. And unlike the pocket rasps Cold Steel typically uses for handle scales, the smooth G10 on the AD-10 makes stowing and retrieving the knife a cinch.

Deployment & Lockup

At this point, Cold Steel’s Tri-Ad lock needs little introduction – it’s simply one of, if not the strongest locking system on the market today. What impresses me more than its absolute strength is its tolerance for abuse over time. Even if you were to impact it hard enough to deform the lock face, the built-in play around the lock bar pivot preserves solid lockup, by allowing the lock bar to reset itself against the stop pin. It’s clever engineering, but that play in the lock bar can sometimes make the Tri-Ad lock sticky and hard to disengage. Not so here: the AD-10 unlocks cleanly without the need for any break-in.

Ambidextrous thumbstuds and glassy smooth Teflon washers make for satisfying deployment, whether you open it slowly or with a quick flick. Closing it back up one-handed is a little counter-intuitive. So long as you don’t pull your fingers away from the heavy falling blade, they’ll safely catch the choil and not the edge, though thicker fingers should proceed with caution.

Cold Steel AD-10 Review – Final Thoughts

The AD-10 feels like the latest and greatest result of an ongoing evolution at Cold Steel. I can’t pinpoint when it started, exactly, but I started to take notice when they upgraded their blade steel across the board in 2015.

Ever since then, it seems like they’ve been taking the cheesy machismo that built the brand and distilling it into impressive products that do more than just tactical wish fulfillment (not that there’s anything wrong with that – I once owned a Rajah 2, after all). The AD-10 doubles down on what Cold Steel have always done well – big, brash, and strong – but doesn’t swagger over the little details. It’s not a knife I can always carry, but definitely one I enjoy using when I do. If your pockets will stretch for it, you won’t find a more capable and comfortable folder at this price point.

Sale

COLD STEEL AD-10 3.5" S35VN Steel Ultra-Sharp Drop Point Blade 5.25" G-10 Handle Tactical Folding Knife with Tri-Ad Locking Mechanism

CONSTRUCTION - The AD-10 tactical folding knife features an ultra-wide, ground thin at the edge, honed to razor-sharpness blade that offers unprecedented cutting, shearing, and piercing power while resisting bending, breaking, or chipping
S35VN STEEL BLADE - Crafted from S35VN steel, the AD-10 folding knife's blade ensures super-fine cutting edges and exceptional edge retention; This premium steel is renowned for its durability and ability to maintain sharpness through rigorous use
STRONG HANDLE - The handle of the AD-10 knife boasts heat-treated, full-length aluminum liners and 3D machined G-10 scales, providing unparalleled strength and grip; Its precise contouring and integral finger guard ensure a snug and secure fit in the hand
TRI-AD LOCK - Complete with the Tri-Ad, the AD-10 offers unrivaled strength, shock resistance, and durability; This reliable locking mechanism provides peace of mind, safeguarding your fingers during use and ensuring the blade remains securely in place
SPECS - Weight: 7 oz (198.4 g); Blade Thickness: 3.8 mm; Blade Length: 3 1/2"; Blade Steel: S35VN; Handle Length/Material: 5 1/4" G-10; Overall Length: 8 3/4"; Knife Type: Folder; Blade Shape: Drop Point; Locking Mechanism: Tri-Ad Lock

Editor: I recommend purchasing the Cold Steel AD-10 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Microtech Troodon Review

by Dan Jackson 2 Comments

I’ve got a couple Microtech knife reviews under my belt at this point, and as far as their automatics go I’ve reviewed the Halo VI and the Stitch. Something that is obviously missing from the picture is one of their dual action Out The Front (OTF) knives. The OTF autos are are the knives Microtech is best known for making. And of course for some reason I waited to pick one up.

Buy the Microtech Troodon at BladeHQ

Oddly enough, it was when a buddy of mine in the real world told me he was picking up a couple Ultratechs to daily carry, it prompted me to think about a dual action OTF of my own.

I went for the Troodon because I thought it looked cool with its angled front. I went with a double edge spearpoint blade for added coolness, but as usual for Microtech you can configure this knife in a myriad of ways. Plus, the knife is named after a dinosaur. I’ll get an Ultratech soon.

General Dimensions and Blade Details

The Troodon has an overall length of 7.65″, a 3.00″ blade, weighs 3.00 ounces, and is made in the USA. This is a nice size knife for EDC, provided you are in a jurisdiction that allows you to carry an OTF knife. They do make these with a single edge, so it’s possible this could be a daily carry for some. Personally, this has been more of a collectible than a true daily carry for me.

Here is a picture next to a Spyderco Sage 5:

As you can see it’s a nice size for EDC. Provided you are in a jurisdiction that permits you to EDC it.

For those wanting something significantly bigger, Microtech offers the Combat Troodon with an overall length of 9.5″ and a 3.8″ blade. Weight comes in at 5.35 ounces.

As I’ve mentioned a couple times, this knife has a dual edged spear point blade. You can also get the knife in a drop point, tanto, or hellhound tanto. Additional options include partial serrations, full serrations, coated, or uncoated in a variety of finishes.

My knife features a satin finish. It has been beautifully ground. All grinds are crisp and uniform. The edges are also nice and even, not an easy job for a double edged knife. There is a deep fuller down the blade that has been further pocketed. It looks cool.

Blade steel is the tried and true M390. I have waxed semi-poetic about this steel for a long time. It’s one of my favorite high end steels, blending the qualities of good edge retention and easy sharpening. It also polishes nicely and exhibits good rust resistance.

I can’t say I’ve used this knife a whole lot. Besides it probably being illegal to carry outside my home, the double edged blade is kind of dangerous for my usual box cutting, apple coring shtick. I’ve used it lightly and treated it as more of a collectible. While I know some people will daily carry their Troodons, a lot will keep them as collectibles.

I will say the Troodon came extremely sharp out of the box. It cleanly cuts thin receipt paper. It will open a letter or a package without a problem. And I have to confess these dual action OTFs are actually very handy because you can use them easily with one hand. My Troodon was epic in the kitchen for opening up bags of produce. It also sliced some roma tomatoes easily, although I was careful to clean the blade after prior to retracting it back into the handle of the knife.

On the subject of sharpening, it’s interesting to review Microtech’s FAQs. They say improper sharpening voids their warranty. I’d be curious to learn what that entails. I’m sure gentle stropping or running the edge on a ceramic rod like a Sharpmaker will not void the warranty.

Handle, Ergonomics, and Pocket Clip

The Troodon features a hard anodized aluminum handle, fastened together with Microtech’s proprietary hardware. Usually, this is the part of the review where I’d take a moment to whine about the proprietary hardware, but this is a knife I have no desire to open up.

Fit and finish is excellent. All the parts line up perfectly, and everything has been finished to a high standard. The hard anodizing is good, but it’s not impervious to wear. My anodizing has worn slightly underneath the pocket clip, and my electrician friend’s Ultratech shows some significant battle scars after a couple months of heavy duty daily carry.

Capping things off is an aggressive glass breaker / “skull crusher” on the pommel.

The Troodon is comfortable in hand. There is a lot of traction on this handle thanks to deep scallops all over the handle. That, combined with the box handle shape, means that this is not a knife that will melt into your hand. But you can definitely get a good grip on it, which is essential for using the dual action button. More on that later.

While the knife will never be as comfortable as an Emerson, the handle design serves its purpose and looks good doing it.

The pocket clip is a deep carry “double dip” clip, a la Chris Reeve Knives. I’ve always liked double dip clips as they help anchor the knife in your pocket. That, combined with the good spring retention and aggressive texture under the clip, means that this knife isn’t going anywhere. Comforting when you shell out almost $400 for a pocket knife.

The clip is another precision machined part marrying form and function. It looks cool without being over-the-top, and is both serialized and production date stamped. It’s anchored in place with that impressively machined glass breaker pommel. The clip can be swapped for right or left side tip up carry, but you will need either a special tool or some patience to un-thread the pommel without marring its finish.

In practice the Troodon carries great. The pocket clip is secure and the knife is light. I’ve carried this knife around the house and quickly forgot the Troodon was in my pocket. I literally forgot I was carrying the knife, to the point where I ended up taking it on an hour long bike ride. Generally I don’t select $400 knives for bike rides, but the Troodon performed admirably, thanks in large part to that double dip clip.

Deployment and Lockup

This section is why you buy a Troodon. It’s a dual action out the front automatic knife. That means the blade both opens and closes with the push of a button. It’s an “Out The Front” automatic because the blade shoots and retracts out the front of the knife. None of this should come as a surprise, but it’s worth mentioning to be thorough.

So how does it work? The button is stiff, and takes a good amount of pressure to actuate. That’s a good thing, as you don’t want the knife to accidentally open up in your pocket. Thanks to the significant force required to actuate the blade, I think it’s almost impossible that the blade would open up accidentally.

When you do apply enough force to trigger the blade it shoots out with a satisfying snap. It feels punchy, but its actually not enough force to be considered a “penetrateor”. This means it’s not designed to be shot into it’s target like a light saber. If you hold an index card an inch or two in front of the knife, it will not punch through the card, and it will instead derail the blade. You can then reset the blade by pulling it out manually. I consider this to be a feature, not a bug. As it stands a knife like this requires a certain level of respect. It’s not a toy and you need to be careful with it.

Here it is next to my Halo VI:

When the knife is open there is a little blade wiggle. Not a lot, maybe half millimeter. That’s the nature of most dual action knives, although, the Deadlock is a notable exception. The blade wiggle is to be expected with these production dual action OTFs. The knives will hold up fine under normal use, but you definitely don’t want to do any prying or chopping with a knife like this.

The blade retracts by pulling back on the button. It shoots into the handle with the same speed and sound. The entire process is novel and satisfying.

Microtech Troodon Review – Final Thoughts

Each Microtech I’ve bought has encouraged me to buy another. They are unique and memorable knives. They aren’t cheap, but they are beautifully made in the USA. The visual flair, attention to detail, and robust nature of their offerings elevates their offerings beyond gimmick.

The Troodon is no exception. These dual action OTF knives are Microtech’s bread and butter, and it’s easy to see why. The action is smooth, satisfying, and undeniably cool. While this knife isn’t a daily carry for me, plenty of folks like to carry these D/A OTFs. Part of the appeal is that you can easily open and close the knife with one hand. In that sense, this is actually a practical tool. But it’s Microtech’s ability to blend form and function that keep me coming back.

Recommended to those who are interested in the design, or a high end dual action OTF automatic. I don’t think you will be disappointed.

Microtech Troodon- From $374.00
From: BladeHQ

I recommend purchasing the Microtech Troodon at BladeHQ or Amazon. Thank you for reading.

Emerson Mini Commander Review

by Travis Pike 1 Comment

The Mini-Commander is my third Emerson folder and third in the line of CQC knives. I guess I’m an Emerson collector. I initially purchased a CQC-7BW during my Marine Corps days, then I purchased a Mini CQC-15 that I thought combined a cool tanto edge and a good belly to replace the 7. Now I have a Mini-Commander that I purchased for no real reason.

Buy the Mini Commander at BladeHQ

Buy on Amazon

Of course, it’s been serving as my EDC for several months now because you don’t buy a knife like this and not carry it. It’s a knife designed for guys and gals in the military as well as those who typically work in non-permissive environments, and its in a handier size. The Mini-Commander isn’t for everyone, and its combination of features do make it more or less suited for a niche group of users.

General Dimensions and Blade Details

The Mini-Commander loses half an inch of the blade from the standard Commander model and has a 3.4-inch blade with a deployed length of 8 inches. The Mini-Commander’s blade is .125 inches thick and is made from 154CM. The handle is 4.6 inches long and the knife weighs 4.5 ounces.

It’s a convenient and easy knife to pocket carry. The Mini-Commander features a recurve blade design that sports a very prominent belly. You get a lot of cutting edge in a very compact package. It’s got a standard drop point tip and has a black cerakote finish. A stonewash finish is also available.

The use of 154 CM is pretty standard with Emerson knives and a great overall steel. It’s an excellent compromise of features and specs, but also makes an outstanding metal if you deploy to harsh conditions with your knife. Soldiers, Marines, Sailors, wildland firefighters, Border Patrol, etc.

154 CM is very corrosion resistant, and it is tough steel. It’s relatively easy to sharpen and can get quite sharp. 154 CM steel seems to be excellent steel when paired with a chisel grind. A chisel grind is quick and easy to sharpen, something I appreciated with the CQC-7BW when I was in the field and deployed.

You can get a good sharp edge with minimal tools and effort. The blade will also last. A chisel grind is a strong grind and when combined with a strong steel it makes a very dependable knife. When logistics suck you want something you won’t need to replace.

A chisel grind is great for most things, but don’t expect super smooth cuts. It has some grind to it while cutting. While it does cut, it doesn’t give me that tactile satisfaction I get from a super smooth cut. The belly of this blade makes it a great slasher.

The CQC knives and Emerson knives, in general, are designed to be weapons and EDC tools. I’ve never used a knife as a weapon, and likely never will. However, the belly on this knife would deliver deep, penetrating slashes in such an encounter. From my purposes, it’s perfect for cleaning game or cutting apples up for my kid’s basketball team. I do suggest washing the knife in-between those activities.

Handle, Ergonomics, and Pocket Clip

The handle is designed to fully fit the hand and it does well. The handle curves slightly forward, reinforcing the blade’s slashing design. The grips are made from G10 material and its heavily textured for comfort and control. The finger guard is deep and ensures nothing will slip and cause an accident.

The rear of the grip has jimping on both the handle and blade. It’s quite a bit and the thumb feels comforting pushing on it. Combined with the deep fingerguard and you’ll have a hard time losing your grip. If you do the grip does have a lanyard hole to ensure you really can’t lose this knife.

The grip is very comfortable and the grip design is well suited for slashing and slicing.

The pocket clip is nice and robust, very durable and it clings to your pants well. It’s certainly strong and well made. As a reader and commenter pointed out in my Mini 15 review the knife is only tapped for right-handed use.

Left-handed models exist and a right-handed model can be tapped for left-hand carry but that costs money. However, for the price of this knife, it should be ambidextrous. Most of the knife is ambi so a left-handed clip option should be standard.

Deployment and Lockup

This model features the Wave opening system. This allows you to open the knife as you remove it from your pocket. It’s neat, and if you were about to get into a fight its faster than an auto knife. However, it takes practice to learn.

In addition to the wave feature you have a thumb disk that is ambidextrous and easy to use. A flick of the wrist and thumb will send the blade flying out and locking reliably with just the thumb disk. This takes time and a little wear. The blade is initially tight and opens slowly but over time mine has become easy to flick open with the thumb stud.

The lock is made from titanium and its slightly jimped for an easy push release. What’s interesting is that my Mini 15 seems to lock up all over the place. The Mini-Commander locks up in the same spot every time regardless of how fast or slow I open it.

The lock is nice and tight and hasn’t let me down yet. Titanium may wear with time but it seems like little pressure or force is exerted over this lock so I doubt we are going to see many issues. I still haven’t seen any of the CQC-7 I’ve owned for years.

Emerson Mini-Commander Review – Final Thoughts

This is an expensive knife, with the price being close to 200 dollars. There are admittedly knives out there at that price that cut smoother, are thinner, and have left handed pocket clip options. However, the Mini-Commander’s combination of features does fill a certain role in the military and frontier world.

It’s nice to have a traditional point with a deep belly for slicing when fall deer season comes around and for tasks with a bigger cutting emphasis. It’s better for EDC than the CQC-7 and the mini designation makes it more comfortable than the standard Commander.

It’s a rock solid and well-made knife and it joins what appears to be my ever growing Emerson Collection with its own rightful place.

Emerson Mini Commander SF Plain Stonewashed Blade

Editor: I recommend purchasing the Emerson Mini-Commander at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.