S35VN

Cold Steel AD-10 Review

Of all the words used to describe Cold Steel knives here on BladeReviews.com, “refined” isn’t at the top of the list. That’s not a metaphor – I literally made a list, and “refined” only appears three times. You’re much more likely to see Cold Steel knives described with adjectives like “strong” (41 times), “large” (39 times; followed closely by “big” at 38), and “comfortable” (26).

Buy the AD-10 at BladeHQ

Buy on Amazon

Speaking as a former Cold Steel skeptic, I was unsurprised to find that the AD-10 is indeed strong, large (big), and comfortable. What did surprise me was just how good this knife is. It delivers the essence of Cold Steel, refined. It might be the best knife they’ve ever made. And if you, like me, ever scoffed at Cold Steel’s marketing or rolled your eyes at their product names, read on, because the AD-10 will catch you off guard.

General Dimensions & Blade Details

The proportions of this knife are deceptive. Yes, it’s big, but the wide handle, snubnosed blade, and protruding backspacer make it look even bigger – as if there’s another knife trapped in there, bulging through the seams trying to get out. Makes sense, considering the AD-10 is a downscaled version of designer Andrew Demko’s gargantuan 4-Max. Here it is filling out a Spyderco sandwich, between the longer Military and shorter Paramilitary 2:

The AD-10’s blade is clearly optimized for strength. The tip is wide, thick, and feels practically unbreakable. It penetrates more like an armor-piercing round than a needle, meaning it’ll get you into just about anything so long as you don’t care what kind of hole you leave behind. Behind the tip, the grind thins out quickly to a relatively thin edge thanks to a nicely executed hollow grind. Don’t let anyone tell you that thick knives can’t slice – the AD-10’s substantial 3.9mm blade stock and deep hollow grind work together like a zipper, holding material apart from the blade after the edge separates it. Compared to a full flat ground knife of similar stock thickness, the AD-10 carves through cardboard with noticeably less friction, powering through the nasty two- and three-ply stuff rather than getting wedged in.

There’s no avoiding the laws of physics, however: a hollow grind can only do so much for a knife this thick. It’s graceless in the kitchen, where the tip mashes more than it pierces, and crisp produce is split, not sliced. Then again, the AD-10 isn’t anyone’s idea of a kitchen knife. For more utilitarian cutting it works with surprising agility, despite looking like a wrecking ball.

The blade steel, S35VN, has performed well for me. Edge retention has been good; stainlessness, excellent. As for toughness, it did not disappoint. I took the AD-10 on a hike and ended up using it to trim back a bush that had overgrown the trail. A careless chop glanced into a stone, damaging the edge where it hit. Thankfully, the steel was tough enough to roll, not chip, so the damage was easy to sharpen out.

Handle, Ergonomics, & Pocket Clip

At just over three and a half inches long, I wouldn’t call the blade oversized. The handle, though, is another story. Even if you ignore the extended pommel, it still measures in at 5.25 inches. For perspective, that’s almost as much handle as the Spyderco Military, with about as much blade as the Para 2. Yeah. If you’re someone who obsesses over high blade:handle ratios, this isn’t your knife. To top it off, the AD-10 is bulky, too; easily eclipsing my heretofore thickest knife, the Victorinox Alox Farmer.

These comparisons aren’t complaints. Because the AD-10 is the most comfortable folding knife I’ve ever used. Andrew Demko is a master of ergonomics. You’d think a knife with this many finger grooves – plus a front and rear guard – would feel awkward to move around on, but the AD-10’s smooth and deeply sculpted handle isn’t so prescriptive that you feel locked in to any single grip.

The pocket clip is wide, polished, and barely noticeable in hand. The lock bar and backspacer leave no palm-pinching voids in the back of the handle. Every edge, every corner is shaped or softened. It all feels very purposeful, allowing you to exert more force with less strain – this is a knife that makes “hard use” feel easier. One ergonomic caveat: the forward finger choil might be a little cramped for thicker fingers, although I didn’t have any issues.

The unavoidable problem with a knife this fist-filling is how awkward it is to carry in a pocket. I mean, it’s 6.8 ounces and thicker than a coin purse on laundry day. I can deal with large knives (see my review of the Spyderco Hundred Pacer), but the AD-10 stretches (literally) the capacity of my pockets. If you wanted to carry it in your waistband, you’d probably need to buy bigger pants. Even though it hurts to suggest something so shamefully uncool, your best option might actually be a belt pouch.

Still, despite the weight and bulk, I’d pick the AD-10 for my pocket before any of the other Cold Steel folders I’ve owned. The clip – while it could use a little more “ramp” at the lip to help it over thick seams – is an improvement over the too-short, too-stiff, death grip clips I’ve struggled with in the past. And unlike the pocket rasps Cold Steel typically uses for handle scales, the smooth G10 on the AD-10 makes stowing and retrieving the knife a cinch.

Deployment & Lockup

At this point, Cold Steel’s Tri-Ad lock needs little introduction – it’s simply one of, if not the strongest locking system on the market today. What impresses me more than its absolute strength is its tolerance for abuse over time. Even if you were to impact it hard enough to deform the lock face, the built-in play around the lock bar pivot preserves solid lockup, by allowing the lock bar to reset itself against the stop pin. It’s clever engineering, but that play in the lock bar can sometimes make the Tri-Ad lock sticky and hard to disengage. Not so here: the AD-10 unlocks cleanly without the need for any break-in.

Ambidextrous thumbstuds and glassy smooth Teflon washers make for satisfying deployment, whether you open it slowly or with a quick flick. Closing it back up one-handed is a little counter-intuitive. So long as you don’t pull your fingers away from the heavy falling blade, they’ll safely catch the choil and not the edge, though thicker fingers should proceed with caution.

Cold Steel AD-10 Review – Final Thoughts

The AD-10 feels like the latest and greatest result of an ongoing evolution at Cold Steel. I can’t pinpoint when it started, exactly, but I started to take notice when they upgraded their blade steel across the board in 2015.

Ever since then, it seems like they’ve been taking the cheesy machismo that built the brand and distilling it into impressive products that do more than just tactical wish fulfillment (not that there’s anything wrong with that – I once owned a Rajah 2, after all). The AD-10 doubles down on what Cold Steel have always done well – big, brash, and strong – but doesn’t swagger over the little details. It’s not a knife I can always carry, but definitely one I enjoy using when I do. If your pockets will stretch for it, you won’t find a more capable and comfortable folder at this price point.

Sale

COLD STEEL AD-10 3.5" S35VN Steel Ultra-Sharp Drop Point Blade 5.25" G-10 Handle Tactical Folding Knife with Tri-Ad Locking Mechanism

CONSTRUCTION - The AD-10 tactical folding knife features an ultra-wide, ground thin at the edge, honed to razor-sharpness blade that offers unprecedented cutting, shearing, and piercing power while resisting bending, breaking, or chipping
S35VN STEEL BLADE - Crafted from S35VN steel, the AD-10 folding knife's blade ensures super-fine cutting edges and exceptional edge retention; This premium steel is renowned for its durability and ability to maintain sharpness through rigorous use
STRONG HANDLE - The handle of the AD-10 knife boasts heat-treated, full-length aluminum liners and 3D machined G-10 scales, providing unparalleled strength and grip; Its precise contouring and integral finger guard ensure a snug and secure fit in the hand
TRI-AD LOCK - Complete with the Tri-Ad, the AD-10 offers unrivaled strength, shock resistance, and durability; This reliable locking mechanism provides peace of mind, safeguarding your fingers during use and ensuring the blade remains securely in place
SPECS - Weight: 7 oz (198.4 g); Blade Thickness: 3.8 mm; Blade Length: 3 1/2"; Blade Steel: S35VN; Handle Length/Material: 5 1/4" G-10; Overall Length: 8 3/4"; Knife Type: Folder; Blade Shape: Drop Point; Locking Mechanism: Tri-Ad Lock

Editor: I recommend purchasing the Cold Steel AD-10 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Bestech Knives Malware Review

by John Burridge 4 Comments

Over the years, I’ve noticed that in polite society when I whip out a folding knife to open a box or cut a loose thread, most people’s reactions are some variation of “Oh God, why do you have/need/carry that?” My usual reply is that a knife is the most useful tool in the world, but I’ve found that no matter how “non-threatening” looking the knife is, I still get that same reaction. Therefore, why not carry whatever I want?

Buy the Bestech Malware at BladeHQ

So, a month ago I put down my already scary-looking Microtech Ultratech OTF switchblade and picked up the seriously murder-ey looking Bestech Malware.

The Malware was designed for Bestech Knives by Todd Knife and Tool. TKT was started in 2016 by prolific knife reviewer Teryl Todd (Zelrick42 on YouTube) and his brother Seth Todd. They went from being fans to designers, and have a thoroughly modern company. Teryl lives in Ozark, Missouri, and Seth lives in Houston, Texas. They jointly design their knives by sharing 3D CAD files online, then Seth makes physical prototypes that they both test. TKT have developed a distinct visual style also apparent in their We Knife Co. made Roxi folder, and in the many prototype images shared on the toddknifeandtool Instagram account.

General Dimensions & Blade Details

The Malware’s blade is 3.875” (9.8 cm) long, the blade stock thickness is 0.15” (3.9mm), and it’s full open length is 8.75” (22 cm). The long stabby blade folds into a titanium handle, the blade pivots on ball bearings, and it’s framelock has a steel lockbar insert. The steel lockbar insert is a theoretically replaceable part that protects the titanium framelock from rubbing against the lock face of the steel blade. My experience has been that often a titanium framelock rubbing against a steel blade tends to “stick” in place, but steel on steel doesn’t have the same problem.

Here is a size comparison with a large Sebenza Insingo:

It weighs 3.68 oz. which is technically a little more than a Spyderco Paramilitary 2 or a Chris Reeve Knives large Sebenza, but it feels lighter than either of them in the hand. I attribute this feeling to the weight balance of this knife. If I’m holding the Malware in a normal thumb-on-top grip, and I slowly open my hand, the knife will not fall to the floor, but will stay balanced on my index finger. This nearly perfect weight distribution helps the Malware feel very agile in my hand.

The titanium pocket clip is configured as a right side, tip up only, but there are dedicated left handed versions as well. I have the “Ti Black” version. The titanium backspacer and pocket clip are anodized a brassy gold color, and contrast nicely against the black stonewashed finish of the rest of the knife. The stonewashed treatment gives the edges and corners a worn-in look similar to Kershaw Knives’ “blackwash” finish.

It’s blade steel is S35VN, which was developed specifically for high-end knife blades by steelmaker Crucible Industries and Chris Reeve Knives. It’s a powdered metal steel, which has the advantage of more uniform blending of it’s elements (iron, niobium, chromium, vanadium, etc.) than conventional steel. The end-user benefits of this manufacturing process and the S35VN formula are excellent blade toughness (it can take a hit without breaking or bending), corrosion resistance, and edge retention.

So it’s a modern production knife made in China with premium materials and it’s priced accordingly at $196 on BladeHQ. What makes it different than every other new Kizer, Reate, We, and Rike knife? Style and details.

What I love about good pocketknives is that they’re pieces of functional art you can hold in your hand. The Malware is full of interesting details and I keep noticing more. The design is a strange futuristic combination of curves, straight lines, and, as on the cutting edge of the blade, straight lines that almost imperceptibly turn into curves. The blade has a finger choil which, although it’s a little too small for my index finger, is the full 3.9mm width of the blade stock, which is yet another design detail that I appreciate.

Handle, Ergonomics, & Pocket Clip

In pictures, the handle looks very thin, and in the days between ordering the Malware and receiving it, I wondered if it would be too small to properly wrap my medium-large-ish hands around. When it arrived, I found that it fills my hand very well, and the long, flat clip doesn’t create much of a hotspot any way I hold it.

Some edges are pretty squared off, like the machining on the backspacer, but almost every part of the handle that comes in contact with my hand is chamfered, making it quite comfortable to hold. And the more I have it in my hands, the more I keep discovering new functional design details that I had, at first glance, written off as being cosmetic- like the three holes in the show side near the flipper tab. Those holes are exactly where my right thumb needs traction when flipping the knife open.

On the lock side of virtually all framelock knives, there’s a machined indentation in the frame that allows the locking part of the frame to flex inward and lock the blade open. A lot of knives cover this indentation with their pocket clips, but as yet another example of how well thought out this design is, the pocket clip on the Malware sits right above, but not covering, the indentation. So when gripping the knife to flip it open, my ring finger is naturally pushed into that square indentation, which gives me a secure grip when flipping it open.

I don’t ordinarily use my pocketknives for food prep, but in the spirit of thoroughness I sliced up some veggies with it. The blade has a full flat grind and gets very thin at the bottom, which made slicing easy. The ergonomics for general food prep were fine as long as I didn’t try to spread anything- the thin blade definitely doesn’t work as a butter knife. The flipper tab extends below the cutting edge, so it can’t really be used for dicing either, but kitchen work is clearly not this knife’s intended use.

The pocket clip is rather long and thin and has more flex to it than any other milled clip I’ve handled. The good news is that it doesn’t chew up my (already chewed up) pants pockets, but the bad news is that it seems like it could easily get bent.

I carried this knife during a T.C.C.C. medic class, and when we were learning how to improvise tourniquets, I used the Malware as a windlass (the stiff piece that you twist to tighten the tourniquet.) Despite really cranking this thing down tight on my training partner’s arm, I had no fear of the knife breaking or bending until the instructor decided to show the class how to tie off the end of the improvised tourniquet using the pocket clip. He was bending the clip way out and jamming fabric under it, and I desperately wanted to ask him to stop so he didn’t break it. I resisted this urge because I didn’t want to seem like a weenie to our super-badass Los Angeles SWAT Medic instructor. So he manhandled the clip, and when he was done, it just sprung back to it’s normal state. It may be thin and flexible, but it’s not fragile.

Overall, the Malware isn’t an “overbuilt” knife like a Hinderer Knives XM or a Strider SMF, but it’s definitely tougher than it looks.

Deployment & Lockup

A gripe I have with every single framelock flipper is if I grip it in such a way that I’m putting a lot of pressure with my middle finger on the front of the lock near the pivot, then the knife becomes very difficult to flip open. The worst offender on this front that I have is a Brad Zinker midtech version of the Boker Urban Trapper. The only knife I have that is immune to this problem is my GiantMouse GM1, which is an awesome knife overall, but perhaps solves this problem by having a weak detent which makes it difficult to flip open. However, the ergonomics of the Malware naturally place my fingers where they don’t get in the way of the mechanism at all.

The Malware’s flipper tab is relatively small but has comfortably rounded jimping that provides good traction for flipping. The amount of detent tension that has to be overcome to flip the knife open is tough for me to objectively define- but subjectively, I think it flips perfectly. The Malware’s framelock engages at about 40%, which you can jam over to about 60% if you’re worried about it slipping (not that that’s ever happened to me or anyone I know.)

I don’t carry a knife specifically for self defense, but I must say that I certainly never felt under-prepared while carrying the Malware on the weird streets of Los Angeles. It’s never accidentally opened while in my pocket or while drawing it out of my pocket. It’s flipped and locked open securely every single time I’ve flipped it. I don’t think an especially scary-looking knife like this is going to make a bad man run away in terror, but it’s a long, mean looking blade with a big handle I can get a very firm grip on. So I’ll add self defense to the Malware’s growing list of positive attributes.

Bestech Malware Review – Final Thoughts

I carried the Malware every day for a month and primarily used it for un-challenging tasks like opening packages, slashing open bags of cat food, and as an improvised medical device. At the end of the month, the finish on blade, handle, and clip are unblemished. The S35VN blade was still very sharp in most places, but after a quick, ham-fisted touch up on a Wicked Edge sharpener, it’s back to 100%. There’s no sharpening choil, but I don’t really care if the last few millimeters of my blade are super sharp.

What is the Bestech Malware made to do? I don’t want to sound like a knife snob a-hole, but I tend to compare everything to my Chris Reeve Knives Sebenza 21. The word “Sebenza” is literally the Zulu word for “work”, and the Sebenza feels like an indestructible precision tool. The Bestech knife doesn’t feel like a tool, it feels like a blatantly offensive weapon that can also open boxes from Amazon. Malware is the perfect name for this knife because it’s so badass. Not flaming skull badass, but sci-fi villain badass. It brings to mind futuristic heavy metal music by the band Voivod, it’s like the knife version of the Space Marines’ rifle from the movie Aliens, it should be a weapon in the DOOM video games, and I obviously really like it.

The deciding factor for anyone considering buying the Malware is definitely it’s looks- if you immediately like it’s vibe, I say get it. Nothing is perfect (except kittens), but the Malware excelled at everything I wanted it to do, and looked super-murder-ey doing it. Recommended!

Bestech Knives Malware – From $196.00
From: BladeHQ

Editor: I recommend purchasing the Bestech Knives Malware at BladeHQ and Amazon. Thank you very much.

About the Author: This guest review was written by John Burridge. John lives in Los Angeles and has a deep passion for knives. I plan on adding to this section to include more info about John and where to find him. In the meantime, I hope you enjoyed this in depth review.

Cold Steel Golden Eye Review

by Dan Jackson 8 Comments

One visitor to the site commented that we are “a little biased towards Spyderco”. It’s probably because we have reviewed a lot of Spyderco knives over the years. More than any other brand. I like Spydercos and so does Ben, Grayson, Josh, and pretty much everyone who has written for the site. We all like their knives and consequently Spyderco has gotten a ton of air time over the years. If reviewing Spyderco knives is wrong, then I don’t want to be right.

Buy the Cold Steel Golden Eye at BladeHQ

[easyazon_cta align=”center” identifier=”B019RSXKXO” key=”tall-orange” locale=”US” tag=”brdfkdfk-20″]

Perhaps more controversial is my attraction to Cold Steel Knives. I have reviewed a bunch of them over the years. I’m a big fan, although most of them are too big and impractical for me to truly carry and use. I think I may have a fetish because none of the other authors appear to share the desire to review C.S. stuff. Ben reviewed the Large Espada and the Pro-Lite, so I suspect he may also have a little Lynn Thompson in him, and Chad reviewed the Kudu, but that’s it.

Me? I’ve reviewed 15 Cold Steel knives. 16 if you include this Golden Eye. Yeah… that’s an addiction. I blame it mostly on their excellent marketing videos. Also Cold Steel keeps coming out with stuff I want to review. Andrew Demko keeps turning out hits, and I keep buying them. The Golden Eye is no exception. It looked cool, and slightly different from the other Cold Steel knives with it’s golden thumb hole. Had to have it. Sorry (not sorry).

General Dimensions and Blade Details

For some reason I thought the Golden Eye would be smaller. Maybe that’s because Tony wrote a quick review on it a few years back, and he typically picks out smaller more practical knives. Who knows. This is not a small knife. It has an overall length of 8.375″, a 3.5″ blade, and weighs 4.3 ounces. It’s made in Taiwan like most of Cold Steel’s other folders.

This is a bigger knife. The handle in particular is pretty large, but that’s OK as we will soon learn it is comfortable. That said, it feels light for its size and will make a great work knife. Not a great urban EDC option.

The blade is a big beautiful drop point. The overall profile reminds me of the Terzoula Slipit with its angled thumb ramp extending into a swedged drop point blade. It’s the kind of no-nonsense blade shape that will serve you well in virtually any task. The blade is ground thin with a deep hollow grind, has been given a two-tone satin finish, and is finished with a neat and evenly applied edge.

Cold Steel selected S35VN for this knife. These days the vast majority of their premium folders come in S35VN, replacing CTS-XHP, which replaced AUS-8. S35VN should need little introduction at this point. It is an American made steel designed as a follow up to S30V. It is specifically formulated for knife steels and is great stuff. It takes a good edge, has good edge retention, doesn’t rust or stain easily, finishes nicely, is reasonably tough, yet is easy to sharpen. It’s an excellent blade steel.

And the S35VN really sings on the Golden Eye. I was borderline shocked with how well this knife performed. It slices cardboard with aplomb. It absolutely zips through the stuff. No issues with rope. Great for slicing fruit and other work in the kitchen as well. This is a sturdy knife but it’s ground to slice and has performed phenomenally well in my use and testing.

I’ve been touching up the Golden Eye on my [easyazon_link identifier=”B001JL1I6Y” locale=”US” tag=”brdfkdfk-20″]Spyderco Golden Stone[/easyazon_link], and the edge stays freaky sharp that way. Must be all the gold. No complaints with the blade or blade steel on this knife.

Handle, Ergonomics, and Pocket Clip

The Golden Eye uses Cold Steel’s tried n’ true method of thick linerless G-10 handle scales. I’ve reviewed many of their knives with similar construction, and this knife works just as well as the others. The G-10 is thick and sturdy. There is very little flex when you try to squeeze the handle slabs together.

Fit and finish on the handle is excellent. Everything has been neatly finished. The parts are all flush and the handle screws together so the knife can be taken apart and maintained. The choice of forest green for the handles is a nice touch. It’s a little different without being too far out there, and contrasts with the gold hardware.

I wasn’t sure how the ergonomics would be on the Golden Eye. I guess that’s true for every knife I order, but the Golden Eye in particular had me guessing thanks to the multiple finger scallops. Complicated finger grooves can be a mistake if they force your hand into an awkward position. Here the groves are generous. They feel comfortable and work well for me. I think that most people will find this knife comfortable to use, but I haven’t taken a poll on this. Let me know in the comments section if you have this knife but don’t like the way it feels in hand. Personally, I’m a fan.

In addition to the finger grooves you have peel ply G10 for grip, and some light jimping along the back of the handle. These features provide a good amount of texture without going over the top. Overall I find this to be a comfortable knife to hold in forward and reverse grips. I’ve used this knife extensively and find it to be comfortable to cut with.

The Golden Eye comes with a large gold colored pocket clip and is configured for ambidextrous tip up carry. The clip appears to be designed for strength. You have milled recesses in the handle for the clip along with 3 screws. Spring strength is excellent and the knife is kept firmly in place.

In the pocket the Golden Eye carries well for what it is. It’s a bigger knife, so I tend to notice it, but it’s also a thin handled knife and it’s relatively light for its size. Not a boat anchor, but not a feather either. The strong clip keeps the knife firmly in place. All said I think the Golden Eye behaves nicely in the pocket for a larger knife.

Deployment and Lockup

This knife uses a stepped thumb hole to get the blade open. Cold Steel calls this the “Hollow Thumb Ramp” (HTR), and that acronym is pretty accurate. In practice the HTR works well and is a cool idea. It’s kind of a hybrid between a thumb hole and thumb stud. There is a lot for your thumb to grab onto, and this knife can be opened with gloves as well. The serrated thumb hole is held in place with a set screw, which is kind of interesting. It’s a nice design and one I wouldn’t mind seeing on more knives.

It’s worth noting that the gold plating on the thumb hole has worn off. I bought this knife off BladeForums in “Like New” condition, and it clearly was not like new. Disappointing, but given the price I paid and the fact I was going to use this knife I ultimately decided to keep it. However, the pictures you see here demonstrate that the gold finish is subject to wear.

The action of this knife is smooth thanks to a large pivot and phosphor bronze washers. Like most Cold Steel Tri-Ad lock knives, a good amount of force is required to open and shut the blade. This isn’t a blade you will be able to flick open. But you will find the action to be smooth and reliable, and that’s what I would expect from a rugged utility knife like this.

For lockup we have the aforementioned Tri-Ad lock. I’ve reviewed a dozen or so knives featuring this knife of lock, so forgive me if this sounds a little repetitive, but the Tri-Ad lock is a lock back reinforced with a stop pin. It’s an extremely strong lock design. The Tri-ad lock on the Golden Eye knife is no exception. You can’t muscle blade play out of this even if you try to move the blade out at the tip.

Here is a size comparison with another workhorse in my collection, the Buck Marksman. Still rocking the Marksman:

Disengaging the lock requires a good amount of force, but it’s not as bad as something like the 4-Max. Actually, I find the amount of effort it takes to open and close this knife to be reasonable. That said, this knife has been used quite a bit. Out of the box these can be stiff to open and close, so you may need to break your knife in.

Blade centering is perfect on my knife.

Cold Steel Golden Eye Review – Final Thoughts

Cold Steel has done it again. This is a strong and practical utility knife. It handles well, cuts like a beast, and features the strongest lock on the market. The “Golden Eye” (Hollow Thumb Ramp) works great. The HTR combined with the unique profile, gold hardware, and green handles help distinguish this knife in Cold Steel’s lineup. With so many great Demko designs on Cold Steel’s roster you would think that they cannibalize each other. The Golden Eye is a unique knife, even if it follows Cold Steel’s formula in many ways.

Where the knife may fall short is that this is another large folding knife from Cold Steel. It’s a great performer if you can carry and use this knife, but this isn’t a knife I can pull out at the office or the grocery store. It’s just too big. If I worked on a ranch or something this would be a great choice, but as a mild-mannered couch commando I usually carry a smaller knife. Also, the finger scallops in the handle won’t work for everyone.

That said, I found this to be an impressive knife. Especially the way it cuts. It’s a joy to cut things with this knife. Andrew Demko knows what he is doing and Cold Steel has a track record of executing his designs to brilliant standards. The Golden Eye is no different. Well worth seeking out if you like the design or are an unabashed Cold Steel fan like me.

[easyazon_infoblock align=”center” identifier=”B019RSXKXO” locale=”US” tag=”brdfkdfk-20″]

If you are thinking of buying Cold Steel Golden Eye, please consider purchasing it at [easyazon_link identifier=”B019RSXKXO” locale=”US” tag=”brdfkdfk-20″]Amazon[/easyazon_link] or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com and help produce future reviews. Thank you very much.

Spyderco Native 5 Lightweight Review

by Dan Jackson 27 Comments

Last updated: January 24, 2019
The Native has been a staple in Spyderco’s catalog since 1997. Back when I first got into pocket knives it struck me as a potentially excellent knife. It has great specs on paper. Lightweight, high quality blade steel (at a time when that wasn’t a given), a good useful size to get things done, and a surprisingly affordable price point. This knife sold for close to $50. But the previous generation Native also had a saber grind, toothy jimping, and pinned construction. A number of flaws that kept me from giving the knife my full endorsement.

Buy the Spyderco Native at BladeHQ

Buy on Amazon

Of course Spyderco being Spyderco, they haven’t rested on their laurels. Their most classic designs get updated and tweaked over the years, and the Native was no exception. The Native 5 is their latest in the series. Introduced in 2012, this 5th generation in the series benefits from a number of upgrades. They have also rolled the Native pattern out in a number of variations, including the covetable carbon fiber version Aaron reviewed.

This plastic handled version, dubbed the “lightweight”, is their simplest Native. But I happen to think it may be their best version of the Native yet. Let’s dive in to see what this Native 5 Lightweight is all about.

General Dimensions and Blade Details

The Spyderco Native has an overall length of 6.875″, a 3″ blade, a weight of 2.45 ounces, and is made in the USA. I happen to think this is a great knife for suburban daily carry. It’s a full size knife, but at less than 2.5 ounces you hardly notice it in the pocket. While the Dragonfly II gets the job done, the Native 5 gives you more options.

Speaking of the Dragonfly II, here is a size comparison:

These days the Native comes in a fully flat ground leaf shaped blade. The old deep hollow grind and swedge has been updated with something a little more modern and clean looking. It’s the kind of simple and elegant blade shape that works well for everything from carving up a block of cheese to breaking down boxes to preparing wood shavings for a bonfire.

Spyderco has released this knife in many different blade steels over the years. Mine happens to come in S35VN, which I believe is a fairly common offering for the Native 5. They offer these in everything from S30V to exotic steels including S110V and even Maxamet.

I like the S35VN version of the knife, as S35VN is so easy to maintain. It takes a nice edge and is easy to sharpen, while also exhibiting decent toughness and corrosion resistance. No steel is perfect, but S35VN is pretty damn good by most metrics.

In practice my knife has done everything I’ve asked it to. It is an excellent slicer. It can thinly slice fruit, zip through cardboard, and handles heavier duty chores as well. I’ve been maintaining the edge on my Spyderco Sharpmaker, and the knife stays razor sharp that way. This is a great “do everything” blade that will handle all the stuff you would expect a good EDC knife to handle. I have carried and used this knife extensively. It just works.

Handle, Ergonomics and Pocket Clip

The handle of the native is comprised of two injection molded linerless Fiberglass Reinforced Nylon (FRN) handle pieces mated to a steel lock back and FRN backspacer. Everything is finished well and is secure. The old version of the Native had pinned construction, but this Native 5 comes with screw together construction. So you can take the knife apart if you would like to clean it. All said this handle is simple and utilitarian.

The handle of the Native 5 is big and boxy, providing you with a comfortable handle that fills the hand. There is a nice forward finger choil that is welcome on a good Spyderco. There is no lack of grip either. Between the bidirectional texturing, and the heavily jimped thumb ramp you are going to be hard pressed to find fault with the traction on this knife.

But personally I’ve never been that obsessive about traction. What I enjoy most about the ergonomics of the Native 5 is that none of the ergonomic features get in the way. Instead, everything has been applied with a deft hand. Subtly is the name of the game here, and the whole is the greater than the sum of its parts.

Once again, it’s kind of hard to explain what makes this handle so good, but at the end of the day it just works. This is a knife you will want to hold and use.

Lets turn to the pocket clip. This too has been worked over the years. What Spyderco has done is provided a secure spoon style clip with a unique 3 screw configuration. The base of the pocket clip straddles either the lanyard hole or the pivot, depending on whether you have the pocket clip placed for tip up or tip down carry. This is a “4 corners” clip, so you can configure the knife to carry tip up or down for left or right handed carry.

In practice this knife carries phenomenally. It’s a sub 2.5 ounce folder. You forget it’s there. While the pocket clip is not a deep carry clip, it’s still discreet, burying the majority of the handle. It also a secure clip with excellent spring retention. Not once has this knife fallen out of my pocket.

Lock and Deployment

For deployment we have the Spyderco thumb hole. No surprises there. What’s potentially surprising is this knife has no bearings or washers inside it. It’s all FRN. That would be a turn off for me, but honestly I didn’t know the knife didn’t have washers until I took it apart. It was smooth and I figured it had phosphor bronze washers or something in there. It doesn’t, but that’s OK because it doesn’t need them.

Here is a shot of the disassembled knife so you can see what I’m talking about:

The Native 5 comes with an adjustable pivot, a big upgrade over the old version of the knife that was pinned together. This is a bushing pivot. It works great, and the blade is perfectly centered.

Here is a size comparison with the Sage 1:

For lockup we have a lock back. It’s got a crisp snappy action that is satisfying to use. And there is no blade play in this knife. That is surprising when you consider it’s a plastic handle with no liners at all. Yet it’s a robust knife. Would I baton with it? No. Would I jab it into a tree and use it as a step ladder? No. But it has held up great after normal extended use.

Here is a parting shot with the Native 5 next to my Paramilitary 2:

Spyderco Native 5 Lightweight Review – Final Thoughts

The Native 5 is one of my favorite EDC knives. I even like it more than the Sage 1. Here’s why: it’s lighter than the Sage, has better pocket clip retention, I prefer the S35VN blade, and I think it’s a little more comfortable with the big plastic handles. The Native 5 has found it’s way into my permanent EDC rotation. It’s just an excellent knife and you don’t need to think very hard about carrying it. The blade is versatile and cuts well. The handle is comfortable. The pocket clip is great and the knife is so light you forget you are carrying it.

Spyderco offers this knife in a G-10 version with liners. Why you would pick that knife over this lightweight FRN version is beyond me. The G-10 version weighs over an ounce more. I’m sure it’s a great knife, but I don’t need to look any further than the FRN version. Maybe you have some harder use in mind for your pocket knife. But for most people I think they will find the Lightweight version to be plenty stout and rugged. This is a workhorse of a knife, and it’s great choice if you primarily use your knife to cut things.

The Native 5 Lightweight has my highest endorsement. This is an exceptional EDC knife. Buy it and enjoy it.

Spyderco Native 5 Lightweight Signature Knife with 2.95" CPM S30V Steel Blade and Black FRN Handle - PlainEdge - C41PBK5

An Improved Classic: The Native model has been a mainstay of Spyderco's product line for years as a result of it's Superior Quality and affordability. The state of the art Native 5 is available in an array of handle choices and colors.
USA Made: Spyderco takes tremendous pride in every knife we make, but the ones crafted in our Golden, Colorado factory are special because we invest a piece of ourselves in every USA-Made knife we create.
Light and Durable: This Native 5 handle is fabricated with Fiberglass Reinforced Nylon. FRN is a polymer mixed with glass fiber that is injection molded and formed into a sleek textured handle, creating a lightweight yet high-strength knife handle.
Dependable: If you are looking for control and precision, look no more. This knife features our PlainEdge grind which is known for creating a smooth and exact cut.
High-Strength Lock: The Back Lock mechanism is known for it's high-strength and ease of use. The locking system is positioned on the back of the handle.

If you are thinking of buying Spyderco Native, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Kizer Sheepdog Review

by Dan Jackson 6 Comments

Imagine you can pick out anything from Kizer‘s lineup. I was recently put in that position. Not a bad place to be. Thumbing through their catalog yields all sorts of stuff from the pedestrian to the outlandish. The Sheepdog is more in that second camp. It’s a big bold design. Not likely to dislodge something like the FRN Chaparral from your pocket, but definitely a conversation piece.

Buy the Kizer Sheepdog at BladeHQ

No products found.

The Sheepdog is a design from Chris Conway of Sheepdog Knives, and is the production version of Conway’s C01C custom knife. The Sheepdog even has “C01C” laser engraved on the blade. It’s a big and chunky offering for fans of big and chunky knives. Clearly this one won’t be for everyone, but the unique design and loyal following piqued my interest.

This knife was provided to me free of charge from Kizer. All thoughts are my own.

General Dimensions and Blade Details

The Sheepdog has an overall length of 7.75″, a 3.125″ blade, and it weighs 6.17 ounces. Right now I have the open knife resting on my chest as I type this review out on my couch. The resulting sensation is what I would expect the early onset of a heart attack to feel like. It’s a heavy pressing weight, bearing down on my solar plexus. I better move this review along before my girlfriend has to call 911.

While the Sheepdog is categorized as an EDC knife, you will need to be a fan of BBKs (Big Beautiful Knives) to tote this one around.

For those seeking something smaller, Kizer wisely decided to introduce the Kizer Mini Sheepdog a while back. As part of the Vanguard series, the Mini Sheepdog comes with G10 scales and a liner lock, but it also clocks in at a mere 3.25 ounces. I received a Mini Sheepdog from Kizer as well, but stupidly forgot to take a size comparison photo before sending the Mini over to Grayson for review. I liked the size and weight of the Mini Sheepdog and could see that making for an interesting daily carry tool.

The Sheepdog’s blade is a massive slab of S35VN stainless steel. It’s a modified sheepsfoot, with a gently curving edge, high flat grind, and dual swedges. Sheepsfoot knives generally don’t have a penetrating tip, but the Sheepdog’s leading edge is canted out slightly, resulting in a strong tip that won’t pick out splinters, but could easily blow through a hollow core door.

The blade has been nicely made. The grind lines are crisp, the edge is clean and even, and the finish is a fine stonewash. No complaints.

Given this blade is a hair over 4mm thick, I was dubious of the Sheepdog’s cutting abilities. But much like an NFL linebacker, this big boy has some moves. I started with an apple, as apples are a great test of the slicing ability of a pocket knife. A slicey knife will cut the apple cleanly, while a chunky blade will plow through it, leaving a series of fault lines in your apple slices.

Much to my surprise the Sheepdog cut the apple cleanly. It’s like a small butchers cleaver.

I moved on to cardboard. No problems there either. The S35VN blade peeled through the cardboard boxes. It eventually slowed down as the edge dulled, but the edge geometry is good and the knife cuts well. After the boxes, I touched the Sheepdog up on the ceramic rods from my Sharpmaker and we were back in business. At that point I carried the knife with me. Mostly on the weekends when I could carry a big blade like this. It performed regular EDC tasks, including opening mail and packages containing other knives, without any issue.

Handle, Ergonomics, and Pocket Clip

Handle construction is simple and elegant. At the front of the knife you have an oversized pivot with an anodized blue titanium pivot collar. Towards the butt of the handle are two stainless steel standoffs. A series of three slots have been milled into the show side, offering a little extra traction and a view inside. Not much to see except for an expanse of dully shining titanium when the knife is open, or the glinting stainless steel blade when the knife is closed.

There is something oddly cathartic to the handle of this knife. It’s a hefty piece of contoured and bead blasted titanium, and it reminds me of palming a well worn river rock.

While the Sheepdog doesn’t have much of a “traction plan” with respect to aggressive texturing or jimping, the knife has clearly been built for comfort. Your hand naturally wraps around the handle, fingers finding the grooves, and thumb sliding across the broad spine of the blade. The result is a secure and confident grip without hot spots or ergonomic issues. I had no problems using my knife during the testing period. Granted I didn’t try to break down a yak with it, but for normal utility tasks the knife worked fine. I suppose you could always slap some skateboard tape on it, dudes.

The pocket clip is not without its controversy. First of all, it’s a milled titanium clip, so by default it’s going to raise the ire of a percentage of our knife loving brethren. I’m talking about those who have sworn their swords against the recent rebel uprising of milled pocket clips. Those folks will forever condemn the Sheepdog with its milled clip as a glorified paperweight, unfit for daily carry.

I’m a little less dogmatic when it comes to this sort of thing. Yeah, I’ve handled some knives with milled clips that didn’t work, but the one on this Sheepdog isn’t bad. It has been designed in a way to produce a lot of spring tension. Spring tension is critical for the success of any pocket clip, as this is what keeps the knife in your pocket.

The pocket clip works fine. I mostly wear lightweight shorts with a triangular pocket, and like to keep my knives high in the pocket up near my belt. Nothing upsets me more than a loose clip that allows my EDC knife to constantly sink towards the bottom of my pocket. That is the worst. Thankfully we don’t need to worry about that here. The Sheepdog’s pocket clip defies gravity and keeps my knife where I want it. No small feat given how heavy this thing is. Job well done, Kizer.

Ultimately, the Sheepdog carries well for what it is, but this is still a 6 ounce+ pocket knife. It isn’t a Dragonfly. You are going to notice it. It may even pull your pants down if you forget to wear a belt.

Deployment and Lockup

The Sheepdog makes use of an oversized flipper tab to get the blade open. The flipper is a substantial piece of steel allowing the user to pop the blade open with a lightswitch stroke. The detent is dialed in, and the blade runs on caged washers. The end result is a knife with reliable and satisfying flipping action. I’d put it at a solid “7” on the 1-10 scale. It gets the job done, but this is still a big heavy blade, and you feel that in the action. There is no jimping on the flipper tab, and I don’t think it needs it. My index finger has never slipped on the flipper.

For lockup we have a standard titanium framelock with steel lockbar insert. This is much like the Kizer Intrepid I reviewed two years ago. Kizer has the lock tuned to perfection. It locks up early, there is no blade play, and the lock is easy to disengage. There is no lock stick, and thanks to some contoured edges I can easily jam my thumb in place to release the lock bar. Much like the framelocks you find on a Zero Tolerance knife, this one just works.

Here is a parting shot of my Sheepdog next to the Paramilitary 2:

Blade centering is perfect on my knife.

Kizer Sheepdog Review – Final Thoughts

The Sheepdog is not for everyone. In fact, the Sheepdog is not for most people. It’s simply too big and too heavy. Despite that this knife has been well received. After carrying one for a while I can see why. It’s well made and functional. For those who want something big and chunky, the Sheepdog could be the one.

While the Sheepdog a big chunky knife, it is surprisingly light on its feet. The blade cuts cleanly, the knife feels good in hand, and it actually carries alright thanks to an especially strong milled pocket clip. And you can’t argue with the material selection or the fit and finish. Top notch materials combined with excellent fit and finish all lend a premium feel to this knife. That’s important given its ~$200 price tag.

The end result is a big but surprisingly refined knife. It isn’t for everyone, but I suspect that those that find themselves drawn to the Sheepdog will be pleased with its performance and execution.

No products found.

I recommend purchasing the Kizer Sheepdog at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Custom Knife Factory Decepticon 2 Review

by Andrew Gene Leave a Comment

Last Updated: August 3, 2019
Ever since the explosion of the Shirogorov brother’s knives, there has been an increased interest in what is being produced in Russia. This has been pushed further along by a growing amount of breakout designers, most notably Dmitry Sinkevich.

Buy the CFK Decepticon 2 at BladeHQ

Sinkevich, a long time Shirogorov collaborator, has also worked extensively with KAI USA. The outcome was a high end knife in the Limited Edition 0454, mid range knives in the 0452CF and 0450 as well as budget conscious models like the Kershaw Nura.

The KAI collaboration has resulted in wider exposure and greater accessibility to Russian designs outside of Shirogorov, who were previously the go to brand. The issue with enjoying a Shirogorov has always been the initial price point and/or inflated after market cost, partly due to available knives and a near monopoly on their distribution in North America. While somewhat inaccessible, the popularity of Shirogorov has opened up a wider market for other Russian designers and manufacturers. At the same time, the KAI collaboration put similar designs into more peoples hands.

Enter Custom Knife Factory. Custom Knife Factory is a relatively young manufacturer headed by Mikhail “Mike” Kulygin. The aim of the brand is to work with some of the “newer” talent on the Russian Knife scene. I quote ‘newer’ as some of these designer/makers have been around for quite some time. It’s just that they are only coming into our popular North American knife culture as of late.

One such designer is Alexey Konygin the creative mind and craftsman behind the knife in this review. I personally have been very interested in Alexey’s designs after seeing a video of a custom Decepticon “1” on YouTube in 2012. Impressively 2011 is when the designer came onto the scene, hitting the ground running with his original offerings. Three years and a new iteration later, I’m very happy to present a review of the Konygin/CKF Decepticon 2.

General Dimensions and Blade Details

The Decepticon 2 is a large folder, produced in a limited run of 300 natural-finish titanium handle versions. The over all dimensions are 9.69” with a substantial 4.33” blade and weight of 6.06 oz. It’s difficult to perceive the size of the knife based on the numbers alone, it’s best to hold one to get the idea. The designer has stated a liking for big knives and this certainly fits the bill. Despite its size, it actually feels quite light in hand due to the handle’s structure.

The blade is made from Crucible’s S35VN, a widely used powder metal “super steel”. It is considered an upgrade to S30V through the addition of Niobium and has pretty much taken its predecessors place in mid to high end folders. Overall, this stainless has great edge retention and toughness, yet is still fairly easy to maintain.

The profile is a stylish modified drop point. A high flat grind adequately reduces the .156” stock at which point it receives a secondary edge bevel. The spine has a slight concave curve for thumb placement which changes direction mid-spine, arcing downward to meet the belly at a fine tip. The upper portion of the blade is detailed with a stylized thumb hole that is accented by a deep swedge grind and line milled into the upper corner of the opening. Visually, the line here continues up to a small thumb ramp that has a row of fine jimping. The blade has a light stone wash finish and is kept clean of markings except for text indicating the steel type. To help with sharpening, there is a good sized choil allowing you to work the edge right to the heel.

Handle, Ergonomics, and Pocket Clip

The handle is constructed of sculpted slabs that stack together integrating to define the Decepticon’s distinct aesthetic. The two inner parts of the frame include all of the key mechanical components, like the lock and a channel for the stop pin. The outer scales add more width for a full feeling grip while their cutouts create counterpoints with the inner, latticed frame. At each end, the layers shear off at contrasting angles adding another interesting aspect to the multi-faceted design.

Although the shapes appear to have several hard angles, the overall profile, coupled with some nice chamfering makes for a surprisingly comfortable grip. The only exception to this for me, is the end of the clip which can feel sharp if you hit it the wrong way.

While on the topic of the clip, it works well with a good amount of tension. It blends into the rest of the design and has been nicely machined. As another feature, the partial back-spacer raises away from the frame creating a spot for a lanyard. The back-spacer is marked with the knife’s unique serial number, this one being #67 of 300. The CKF logo also appears etched on one of the exposed surfaces of the liner.

Deployment and Lockup

While there is the thumb hole, the Decepticon 2’s main deployment method is its flipper. As with most details of the knife it is also embellished with a cutout. Functionally it works well, snapping the substantial blade into place with a push or pull, equally well.

The lock up is very solid with good tension allowing it to seat and disengage easily. The end of the lock arm has a steel insert with a similar configuration to Zero Tolerance’s knives in that the part also includes the detent. To help comfortably unlock the knife and to provide easier access to the lock arm, the inside of the scales are chamfered. The mechanism travels on thrust bearings for smoothness and lateral stability. Everything is held in place by an over-sized custom pivot.

Custom Knife Factory Decepticon 2 Review – Final Thoughts

Although individual taste will vary, it is undeniable that the Decepticon designs are unique. If looking at it objectively, all of the key functional components are there. The blade is useful, handle comfortable, lock strong and materials premium. More impressively the design does this while visually setting itself apart from anything else currently out there.

I think that the name might be a little confusing when approaching this design because of it’s association to the movie franchise. Michael Bay might narrow the market appeal. As a note, Konygin named the knife after designing it and has stated that it was not inspired by the movies…

Personally I really enjoy this iteration and production of the Decepticon. It has achieved a delicate balance of generous embellishment without looking gaudy or ostentatious. I would equate this to the approach of creating shapes and lines by removing stock, instead of piling on extra details, like moku-ti or engraving. It clearly shows off a creative, innovative liner lock assembly with an intelligent utilization of modern methods and materials.

I especially appreciate how well thought out the lines and shapes are on this design. Alexey Konygin has paid great attention to the interaction of all the elements when the knife is both open and closed. From a manufacturing perspective the knife is very well made with a top end fit and finish. I’m looking forward to seeing more CKF collaborations and Konygin designs in the future. I’m sure that these collaborations will help quench the healthy thirst for more Russian designs.

CKF Decepticon 2
From: BladeHQ

Editor: I recommend purchasing the Custom Knife Factory Decepticon 2 at BladeHQ or Amazon.com. The knife is no longer in production, but BladeHQ offers plenty of CKF knives, including the Decepticon 4. Thanks for checking out the review.

Photo Credits: Andrew Gene