flipper

Kizer Gemini Lefty Review

Ray Laconico has been a favorite knife maker of mine for a long time. Over the years that I have been buying and selling custom knives I’ve had the opportunity to own two different customs from Ray. His style is simplistic, but with a very unique aesthetic that sticks out on a table full of titanium knives.

Buy the Gemini at BladeHQ

Buy on Amazon

The Kizer Gemini, a production version of the famous Jasmine, came out a few years ago to much fanfare and excitement, it was a chance for everyone that wanted a piece of Ray’s designs to be able to get it, at a price that would encourage them to put the knife to use.

Kizer also has been making ripples in the EDC cutlery world, largely because of the fact that they seem to have mastered the ability to partner with custom knife makers and create extremely high quality versions of their knives. They’ve successfully done this with a number of notable makers including Matthew Christensen, Sheepdog Knives, Mikkel Willumsen, and a handful of others. Let’s get into some specifics.

General Dimensions and Blade Details

The Gemini has an overall length of 7.25″, a 3.125″ blade, weighs 3.6 ounces, and is made in China. Kizer makes a more affordable Vanguard series version of the Gemini. Ben Schwartz reviewed that one in 2016. And although this review is of the lefty version, it just as easily applies to the regular Gemini. The only difference is that the knife has been “mirrored” and the lock is now on the other side.

The Gemini has a traditional “leaf” style drop point blade. Very similar in a lot of ways to some of the popular offerings from Spyderco. This blade shape excels, in my experience, for general EDC use. The full flat grind peels layers away when you’re slicing through food or other materials, it’s easily sharpened without any tricky recurves, and the 3” mark is right in my sweet spot for daily carry.

S35VN steel seems to attract a little bit of controversy, my experience with it has been pretty good however. It takes a good edge on my Wicked Edge, and will hold it through a lot of work (in particular a lot of cardboard boxes). As an aside, I think that sharpening your own knives can be a good exercise in understanding how steel preforms under wear. Lots of people talk about wear resistance, toughness, and edge retention but I have found that these characteristics present themselves best during sharpening.

Kizer stonewashed the blade on the Gemini. Stonewashing comes in many flavors, this one is very similar to the stonewash CRK uses on their knives. It repels wear, and looks really sharp (ha) over time.

Handle, Ergonomics, and Pocket Clip

The handle is contoured Titanium, that have been blasted to a satiny matte finish. The handles are rounded (kinda like a river stone) to be comfortable in hand. There’s something to be said about the knife being a little slippery but its a tradeoff in my opinion.

The handle’s design is simplistic, flaring out towards the pivot to contain the mechanics, and tapering as it moves backward. The spine of the knife rises up a bit to create a very effective palm swell when you grip it. There is a negative angle on the handle that descends down into your grip, between that and the choil formed by the flipper tab when opened the grip is pretty firm and stable when the knife is opened. With the knife closed the pocket clip acts as a nice guide to rest your fingers on when you flip it open, doing this helps keep your hand off the lockbar.

The clip that debuted on the Gemini was a (frankly) cheap bolt on bent Ti spring clip. It was a real speed bump visually for me on the knife. In the newer iteration Kizer has created a milled Ti clip that compliments the design very well. It’s mounted with two screws to the lock side and leaves roughly half an inch visible when it’s in the pocket.

I want make an important point when it comes to a knife’s pocket clip. You likely use the clip more than you use the blade. It’s what holds your knife in your pocket and keeps it from falling out. While doing this, the clips also have to be trim enough to not catch on anything, rounded enough to not cause a hot spot when you use it, and attractive enough to not completely mess up the lines and aesthetics of a reasonably expensive knife.

I’ve seen and handled the first generation of Kizer Gemini, the original clip was really awful at several of these points, but the updated clip solves those problems.

Deployment and Lockup

The Gemini is a titanium frame lock flipper, the tried and tested configuration. One of the things that stands out about Laconico’s custom pieces is their flippability. The knives I’ve owned from Ray have been smooth, with perfect detents, and excellent lockup. The Gemini is no different.

Kizer incorporated a steel lock insert on the Gemini to ensure lasting lock strength and to guarantee that there won’t be any lock stick. The steel lock bar insert trend in production knives is an interesting one to me, in theory it’s the best way to give a frame lock the longest life possible. Late lock up typically occurs as the harder steel tang on a blade rubs against the softer titanium lock face, the blade side of the frame lock over time grinds away the surface of the lock bar’s lock face. Replacing the Ti side of the lock with steel prevents this, it also prevents galling (lock stick). Additionally the steel insert acts as an over-travel stop preventing you from hyper extending the lock bar when you unlock it.

One of the things that always stood out about Laconico’s custom knives is their flipperability (That’s a technical term we use in the industry to describe how well a knife flips. -Ed.). Kizer employed a similar caged bearing system in the Gemini to ensure smoothness and ease of opening. It’s a tried and true method, and Kizer executed it well.

Kizer Gemini Lefty Review – Final Thoughts

So, to wrap up the Lefty Gemini in a nutshell, I think it’s a great value. You’re getting a full titanium, S35VN, steel lock-bared, knife. The fit and finish is excellent, and it’s a great way to get introduced to Laconico’s work without spending custom knife prices.

It’s also worth commenting on the left handedness that Kizer has embraced. Being lefty was what pushed me into buying custom knives, I didn’t like having to adapt myself to use production knives. Whenever I see a company that offers a specifically left-handed option, I try to at least buy one to support that gesture. If you’re left handed, I encourage you to do the same, and if you’re right handed… Well, the Gemini is still a great choice.

Kizer Gemini Framelock

I recommend purchasing the Kizer Gemini at BladeHQ or Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Microtech Sigil MK6 Review

by Dan Jackson 7 Comments

There is depth to the knife industry. So much depth that a reviewer can review knives for 5 years, hire on 3 other writers to review knives, amass a catalog of over 300 knife reviews, and still not review knives from all the major manufacturers. That’s case with this website and Microtech at least. It’s almost shameful that we haven’t reviewed anything by Microtech yet. Thankfully, that gets remedied today.

Buy the Microtech Sigil at BladeHQ

Microtech is a medium sized knife manufacturer located in Bradford, PA. The company was founded in Vero Beach, FL in 1994, by Anthony Marfione, but then moved to Pennsylvania a decade later. As a Florida boy I have no idea why they would pack up and move to PA after 10 years. Usually it’s the other way around. There must be a lot of steel up in PA.

Microtech is known for their automatic knives, and their aggressive designs. Maybe that’s why it took me so long to buy one. I’m not a huge fan of autos, believing that a good manual folder can be almost as easy to operate, and less likely to draw the ire of law enforcement. Plus, their styling is the equivalent of Affliction shirts for the cutlery industry. Shockingly, a Microtech was the 3rd knife Jim Skelton ever reviewed. And it was from the “Zombie Tech” series at that. There is a lid for every pot.

Aesthetic preferences aside, the blades are also pricey. Not that price has stopped me from reviewing a knife in the past. I just gotta get a good deal on it, or really want to check out the knife. Plus the recent ugliness with the Tony S. lawsuit didn’t rev me up about the company either. I have wanted to check their knives out, but something else always took priority.

That all changed when I picked up this Sigil MK6. What a cool knife. This Sigil is beautifully built and richly detailed. Whoever designed it clearly had a lot of fun. My version is the “Apocalyptic” flavor, with a full stonewash and copper accent piece. Lets dive in.

General Dimensions and Blade Details

The Sigil has an overall length of 8.75″, a 3.75″ blade, weighs 5.2 ounces, and is made in the USA. This is a sizable knife. It’s a bit more than I typically like to EDC, but it provides plenty of canvas. Microtech took advantage of this and covered every inch in ornamentation.

The floor to ceiling stonewash lends the knife an aged appearance, although my blade is date stamped “02/2017”.

The blade is a long, sloping, modified drop point. The tip is dropped low, and you only get a slight amount of belly. The tip is also fine and delicate. The blade shape and thumb cutout resembles a prehistoric bird.

A lot of attention went into this blade, and the machining is top notch. The thumb hole has a series of steps milled around it. The finger choil is delicately chamferred. The flipper area has been pocketed. The grinds are beautiful and even. The edge has been uniformly applied. No detail has been overlooked on this blade.

And the blade is made of M390 stainless steel. M390 is about as good as it gets in blade steel, exhibiting the enviable combination of high edge retention paired with easy sharpening. Most super steels are a bear to sharpen, but M390 isn’t bad. It’s one of my favorite blade steels and Microtech gives you almost 4 inches of it here with their Sigil.

Cutting performance is pretty good. The stock on this knife is relatively thick, and the partial flat grind has its geometric limits. Still I had no problem breaking down boxes, opening mail, and cutting fruit. The M390 held up like a champ.

Handle, Ergonomics, and Pocket Clip

The handle is a celebration of milling, and a thing of technical beauty. Microtech is a highly skilled manufacturer, and that comes out clearly in the handle of the Sigil. The titanium handle slabs have been meticulously tooled from all angles, to the point where this knife could pass for an extra on the Dark Crystal.

You can become lost in the complexity of the Sigil. The insides have been pocketed out to lighten the knife. There is also extra fine milling for the frame lock release, the hardware for the pocket clip is hidden, a full titanium floating backspacer, and a copper pivot shroud doubles as a lock bar stabilizer. Microtech’s trademark proprietary hardware holds it all together.

Speaking of the proprietary hardware, although a lot of people aren’t a fan of non-standard hardware, I think it adds something to the overall effect of the knife. It’s totally different and helps make the Sigil feel special. That said, it would have been great if they included a tool. Actually came loose a couple times. Keep in mind I got this knife gently used, so this isn’t a comment on how it came from the factory. I was able to tighten everything down with my finger nail, but this is far from ideal. Thankfully the pivot feels snug and I haven’t had to mess with it yet.

The simple handle shape and heavy chamferring of the titanium handle makes the Sigil a comfortable knife in hand. That should come as no surprise give how large this knife is. There is a small forward finger choil giving you extra options, but I find it to be a little tight relative to other knives with finger choils that I own. I’ve used it, but would advise against getting too aggressive with this finger choil. Good jimping is found on the thumb ramp, flipper tab, and backspacer. Although it lacks corrugated G-10, this isn’t a slippery knife by any means.

The pocket clip is made of milled titanium. Milled clips have done a bit of an 180 over the past few years. When they originally came out they were the bee’s knees. Then they sort of fell out of favor when people found them to be less effective than traditional stamped steel clips. I still like a milled clip if it’s done right.

I’d say the clip on this Sigil is pretty good. It is snug up against the handle and has some spring tension. It’s not crazy spring tension, and I wouldn’t recommend jumping out of an airplane with the Sigil clipped to your pocket, but there is spring tension and the knife is held in place in your pocket. The hidden hardware aspect of it is awesome, and the machining is top notch.

The Sigil carries about how I would expect. It’s a large full titanium folder. Not a total boat anchor, but you feel its presence in your pocket.

Deployment and Lockup

The Sigil is a flipper on bearings. Flipping action is excellent. The generously jimped flipper, strong detent, and smooth bearing system scores the action of this knife a solid “8” on my somewhat arbitrary 1-10 scale for flippers. Better than average, but not a rocket launcher. In addition to the flipper there is an elongated thumb hole. It’s fully functional and you can open up the blade with the thumb hole if you want to be more subtle.

For lockup we have a titanium framelock with stainless steel lockbar insert. The engineering wizards at Miroctech did a fine job designing this frame lock. It is totally secure, with no blade play to speak of, yet the lock is easy to disengage. This is thanks to good lock geometry, and excellent milling on the portion of the lockbar where your thumb goes to release the lock.

As I mentioned previously, there is a copper pivot collar that doubles as a lock bar stabilizer. A nice touch and the only splash of color on an otherwise grey knife.

Here is a shot of the Sigil next to my Paramilitary 2:

It’s a little longer than the Para 2, but you get a lot more blade. Speaking of which, blade centering is perfect on my knife.

Microtech Sigil MK6 Review – Final Thoughts

The Sigil is an impressive knife. Microtech’s styling may not be to everyone’s taste, and this is a bigger knife, but you can’t argue that the Sigil has been beautifully executed with top shelf materials.

Almost every bell and whistle you could ask for is included. A milled clip, milled out handles, floating back spacer, hidden hardware, top shelf blade steel, and tons of machining. Fit and finish is outstanding. And this knife is made in the USA.

My only gripe is that the body screws come loose and they don’t supply the tool to tighten them.

This isn’t an inexpensive knife, but for just under $400 I think you get what you pay for. It’s almost on par with my old Shirogorov 95t, and that knife clocks in at 200%+ of the cost. Any interesting comparison is with a Sebenza.

While this is far from being an everyman’s EDC, I think those whose interests are piqued by the concept of the Sigil will be happy with this knife. It exceeded my expectations, and it makes me want to review more Microtechs in the future. Speaking of which, I really like the Sebastian Benja designed Stitch. I think that will be my next acquisition.

I know the Sigil is not a knife for everyone, so I won’t give it a blanket endorsement. But I give it 2 thumbs up if you are already in the market for this knife.

Microtech Sigil – From $390.00
From: BladeHQ

I recommend purchasing the Microtech Sigil at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Hogue X5 Review

by Dan Jackson 2 Comments

Last Updated: August 5, 2019
The button lock flipper is an intriguing concept. The fun of a flipper paired with a sturdy button lock sounds great in theory. We have reviewed a couple, namely the Spartan Pallas and Freeman 451. Ben reviewed the Freeman, and he reported that the flipping action was good, but the flipper on my Pallas left a lot to be desired. That’s because no one has been able to recreate the ball detent action that you find on a liner lock or frame lock knife that puts the “flip” into a flipper. That is, until Hogue released their X5 flipper.

Buy the Hogue X5 at BladeHQ

Buy on Amazon

Designed by Allen Elishewitz, and modeled after his Black Dolphin custom offering, the X-5 is a button lock flipper that has flipping action that will rival any framelock flipper. In fact, the action is so good you may mistake the X5 for an assisted opening knife.

When I first saw the X5, it was the wharncliffe version. I don’t mind wharncliffe knives, but this one was a little too odd for me to want to buy. The spearpoint version reviewed here has beautiful symmetry. I picked one up as soon as I could find a nice deal on one.

General Dimensions and Blade Details

The X-5 comes in 2 sizes: a larger knife with a 4″ blade, and a smaller version with a 3.5″ blade. I opted for the 3.5″ version, which has an overall length of 8.25″, and a weight of 4.62 ounces. The X-5 is made in the USA. I’d like to mention that this knife is beautifully made just like all the other Hogue knives I have reviewed. The fit and finish is immaculate, complete with a mirror polished edge. From a manufacturing standpoint this is a top shelf knife.

I like the look of this spear point blade. The harpoon knives the knife some attitude, and it compliments the shape of the handle. Allen Elishewitz is among the best knife designers I have met, and this X-5 puts his talents on full display. At any rate, the blade features a simple high flat grind, a neat swedge and a fine tip. There is a slight amount of belly. Nothing crazy, but the edge is one continuous curve. This blade has been given a matte black Cerakote finish. They offer this knife without the coating if you prefer uncoated blades.

Once again, Hogue selected CPM154 as blade steel for this knife. That’s the same steel they have in all their folders, so at this point I have plenty of experience with CPM154, and Hogue’s version / heat treat in particular. This is a great steel that provides easy sharpening and good edge retention. I’ve had some issues with 154CM staining in the past, but obviously this coated blade is not going to rust at all.

In practice the X-5 cuts nicely. I had no problems breaking down boxes, opening mail, and using the X-5 for other EDC related tasks. The tip is servicable, the belly is nice, and the grind is thin enough to cut things. The knife came with a beautiful edge which I have maintained through regular stropping. The Cerakote has also held up OK. It will burnish and wear with use (you can see some of that wear on my EX-04 below). As far as coatings go it’s pretty robust but not as good as DLC. Overall I have no complaints regarding the performance of this blade.

Handle, Ergonomics, and Pocket Clip

The X-5 handle is made of 2 pieces of hard anodized aluminum with textured G-10 inlays. Again, the handles here are beautifully machined. I would not be surprised if Hogue won Blade Show’s manufacturing quality award one year. Details include a vented spine, custom pivot and hardware, an integrated lanyard hole, and body screws on only one side of the knife. Everything oozes quality and attention to detail.

The handle on the 3.5″ version of the knife feels a little cramped. I can get a full 4 finger grip on the knife, but it feels like my pinky is going to slide off the back. Adding to things is the inclusion of an aggressive finger choil that limits your hand placement options. This is probably my biggest gripe with the knife. That said, the handle certainly works and I’m sure the 4″ version will be more accommodating to larger hands. Part of what I enjoy about this knife is the unique aesthetic, and I’m willing to sacrifice a little for the sake of this unique design. However, this is coming from a guy with a 100 pocket knives. If this was my only EDC knife I’d want something with milder ergonomics.

The pocket clip is a deep carry affair, blacked out and swappable for ambidextrous tip up carry. Retention is extremely tight. Pants shredding tight. There is no way this thing will fall out of your pocket, but that’s provided you can actually get this ting into your pocket in the first place. I find the spring action of the clip to be too tight. I’m also not a huge fan of the large tip of the pocket clip that is exposed when this knife is clipped into your pocket. It will scrape car doors if you aren’t careful. I know folks have been critical of the large spoon clip in the EX series, but I think I prefer it over the clip on this X-5.

The X-5 is light for its size and carries easily enough. The nice thing about a matte black deep carry clip is that it makes for a discrete knife. This 3.5″ version is an easy EDC for me, but I would like to see this pocket clip tweaked a little bit.

Deployment and Lockup

The X-5 is a flipper. That should be pretty obvious. There are no thumb studs, thumb holes, or secondary means of opening the blade. That’s alright because the flipping action is outstanding. Like I mentioned in the introduction, the button lock flippers I’ve handled in the past haven’t flipped well. That’s because they never were able to recreate the detent action of a linerlock or frame lock flipper. The X-5 does that by embedding a ball detent into the handle. This YouTube video does an excellent job showing you what is going on. A ball detent is set into a stainless steel spring inset in the handle, and there is a hole and track on the blade for the detent to run in.

The end result is fantastic flipping action – to the point where you may mistake this for an assisted opening knife. But it’s not an assisted opener, and one way you can tell is by depressing the button lock: the blade swings freely. It’s also worth noting that there are no stand alone washers on this knife. Instead, the washers are milled into the aluminum handles. The end result is buttery smooth.

The button lock has been beautifully executed. There is no stick at all in my lock, and lockup is tight as a drum. There is an external safety. Typically I’m not a fan of these, but Hogue has dialed this in so the action of the safety is crisp and purposeful. Unlike most knives with secondary safeties, it doesn’t flop around, and you aren’t going to accidentally activate it on the X-5. While I don’t use it, I like how they did it.

Centering is dead nuts perfect.

Hogue X5 Review – Final Thoughts

All said I’m a fan of the X-5. Hogue makes a beautiful knife, and the X-5 may be the nicest model I’ve handled yet. And they have cracked the code for a button lock flipper. The flipping action is flipping outstanding. That alone earns some points in my book, and I hope Hogue applies this technology to other knives, or licenses it to other companies. I also happen to be a fan of this design. I find it visually appealing and the execution is top notch. For these reasons I appreciate and enjoy the X-5 as a knife collector.

That said, there are a couple issues with the knife that prevent me from giving it a perfect score (not that I really score anything on here anyways). First, the handle is cramped. This knife is not going to replace my Griptilian or other work knives any time soon. I could have gotten the 4″ version, but I usually don’t like to carry folding knives that large. Second, the pocket clip is too tight, and the tip of the clip pokes out too much. It shreds your pockets, is a chore to use, and the tip sticks out to the point where it can inadvertently scrape up cars if you aren’t careful. As a fan of the design, the ergonomic issues are forgivable, but I still think the pocket clip needs work.

So this isn’t a perfect knife, but for me the pros outweigh the cons. I have plenty of plain Jane pocket knives, but nothing else like the X-5 in my collection.

If you are looking for one Hogue knife to use as your EDC, I’d recommend the EX-01 or EX-04. They are more practical and more comfortable work knives.

But if the X5 speaks to you as a collector and enthusiast, then I’m here to tell you to answer the call. It’s mostly an awesome knife. Not my desert island EDC, but there is a lot to enjoy with this one. And like the EX-04, I don’t see myself offloading my X-5 any time soon.

HOGUE X5 3.5" Spear Pants Black Frame Stock Accessories

Great Product

I recommend purchasing the Hogue X5 at BladeHQ or Amazon. Thanks for checking out my review.

Spartan Blades Metis Review

by Grayson Parker 1 Comment

Last Updated: September 7, 2019
Few companies have the pedigree that Spartan Blades does. I rarely hear them pop up in conversation among gear geeks, but that hasn’t stopped them from accumulating a small hoard of Blade Show awards. Between the aforementioned awards and the extensive Special Forces resumes of the two founders, I’m surprised they don’t get more chatter. Maybe they do, just not among folks I know.

Buy the Spartan Blades Metis at BladeHQ

No products found.

As Dan covered in his review of the Horkos, Spartan’s reputation is firmly grounded in its fixed blades and (though I hate the overuse of the term) “tactical” folders. This reputation was so entrenched that when I was offered a Metis in trade, I had to triple check the dimensions. There was no way Spartan made a sub-3” blade…right? Curiosity piqued, I went ahead with the trade. How would an everyday carry knife designed by former Special Forces handle mundane tasks? The short answer: better than I expected, given recent trends among overbuilt folders.

General Dimensions and Blade Details

The Spartan Blades Metis is close to my ideal size for a pocket folder. It features a 2.7” blade housed in a 4” handle, and the entire package (sans clip) weighs in at 2.79 ounces. Those numbers look pretty good, especially when you consider the all metal construction. A knife this size is well suited to a range of everyday tasks, from opening packages to light food preparation. It’s also legal to carry in a wide range of jurisdictions, as it falls under the common 3” blade limit.

If there is one aspect of the Metis that grabs my attention, it’s the blade shape. Most folks would probably call it a drop point, but the dip along the spine gives it something akin to a harpoon’s profile. Whatever the nomenclature, it’s fantastic. There’s enough belly for slicing cuts, but not so much that the edge slides out of the cutting medium during push cuts. The harpoon-ish profile – in addition to reinforcing the tip of the blade – leaves a dip in the rounded spine that’s a perfect resting place for a thumb.

For enthusiasts, Crucible’s S35VN is no longer news. In fact it pretty much serves as a benchmark against which we compare other steels. It has a proven track record as a “do-everything” steel: it chips less and is easier to sharpen than its predecessor S30V, with comparable or better edge retention and rust resistance. I didn’t strenuously test the steel in this case, but I was mostly using it as a gentleman’s folder, and it hasn’t needed any maintenance in the few months that I’ve had it.

When I did use the Metis, it outperformed my expectations. No, it didn’t pass the apple test, but it did well enough that my insensate pinky never started twitching nervously. It behaved similarly while breaking down cardboard boxes: not the best, but good enough to flex into the role. The old saying “jack of all trades, master of none” is appropriate here.

Handle, Ergonomics, and Carry

There’s not much that can be said about the handle of the Metis. Like so many of its competitors, it’s another slab-handled, titanium-on-titanium knife. So what makes the Metis stand out in a crowd? That’s difficult to answer. The show side of the Metis is beautifully simple; between the milled backspacer and the singular visible screw, it seems almost hewn from titanium. The lock side couldn’t be more different. Every screw that was hidden on the show side is plainly visible, and the milling for the lock bar in conjunction with the overtravel stop give it an aesthetic not far off from a circuit board. With that in mind, it’s arguable that Janus is as fitting a namesake as Metis.

Ergonomically, the Metis ranges from unoffensive to pleasant, depending on the task. It never stood out as being great, but neither did it stand out as being horrible – which surprised me given the odd placement of hard angles. If the knife is resting in your fingers, chances are you’re not gripping it so tightly that the angles will have an impact on the ergonomics. By contrast, if you’re gripping it so tightly that the angles would matter, you’re probably holding it farther back in your palm where the angles won’t cause any hot spots. At least, that was my experience. The generous chamfering and subtle curve of the handle are certainly factors here.

The best I can say about the pocket clip on the Metis is that I understand some of the design impulses behind it. It’s attractive and fits the overall aesthetic. The screws for the pocket clip are hidden (meaning they screw in from the interior), which is a nice touch, though it makes removal inconvenient. In slacks, dress pants, or particularly thin jeans, this pocket clip works fine. Beyond that, the news isn’t as nice. The clip doesn’t have much spring to it, so to compensate it doesn’t make contact with the handle scale. Ultimately, this restricts the number of ways to comfortably carry the Metis.

Problems with the clip aside, the Metis is a pretty quiet pocket companion. Most of the time I carried it in the leather slip I use for traditional knives, and while it was a bit of a tight fit, the slip ensured that the Metis didn’t slide out of my pocket or roll to the bottom and cause discomfort. I’d have preferred to carry this with a clip, but it wasn’t onerous to forego it. My CRK Mnandi has a great pocket clip, but I still carry it in a pocket slip more often than not.

Deployment and Lock-Up

The blade of the Metis is deployed solely by the flipper tab. As the entirety of the blade is housed within the handle, there is no pinch point which would facilitate two-handed opening. Though slightly disappointing – it’s always a feature I like to have on a “dress” knife – I can’t fairly complain, as a wider blade wouldn’t carry as well. This flipper is meant to be pulled (like a light switch) rather than pushed. Deployment is thoughtless, reliable, and doesn’t generate discomfort, even if you’re using the Metis as a fidget toy.

The ease of deployment is in part thanks to the caged bearings the blade rides on. I’m of two minds regarding the use of bearings in folding knives: on one hand, they allow for silky smooth pivots, but on the other they’re far more susceptible to grime and grit than traditional washers. (Addendum: I’ve been informed that I may be wrong on this account. More information is welcome in the comments.) On a knife like the Metis caged bearings are fine. A knife this size is clearly in the “EDC/gentlemen’s” category, and not intended for hard use.

At this point, there’s not much that can be said about a well-executed framelock, and the lock on the Metis certainly qualifies as such. The lock face consistently engages 50% of the blade tang, disengaging the lock is easy, and there’s only a fraction of a hair of wiggle in the lock, which vanishes in use. A steel lock insert could fix that, but the only titanium framelock I’ve ever handled that doesn’t have that slight amount of play is the Mnandi, and that knife certainly isn’t being flipped open like the Metis.

Spartan Blades Metis Review – Final Thoughts

Currently, it’s difficult to find a Metis in stock anywhere. My understanding is that this design hasn’t been discontinued, Spartan just hasn’t released any batches recently. Hopefully when Spartan comes back to it, they do so with an eye towards improvement, because there are a few changes that I’d like to see. The bones of a truly great knife are here, and it wouldn’t take much to flesh it out.

First, the pocket clip needs to be redesigned. A nondescript spring clip with outside accessible screws would be far more functional. Second, eliminate the overtravel stop by incorporating a steel lock face into the frame lock. This would eliminate the scant play there is and clean up the lock side of the knife. Those two changes would improve the function and form of the Metis, and (designing and retooling costs aside) I can’t imagine it costing more to produce than the current design. By moving away from a sculpted clip, it may actually cost less.

When they were available, the Metis sold for $340. That’s quite a bit of money – especially for a pocketknife – and the competition is stiff. The obvious comparison is the Small Sebenza. I can’t make a direct comparison (I’ve never owned a Sebenza) but I do own an Mnandi. The best way I can describe it is that if the Metis is practically flawless, the Mnandi is flawless. Of course, no Chris Reeve knife has a flipper, so Spartan is ahead of the game in that department.

Is the Metis still worth buying in the meantime? If you can find one, and if the design speaks to you, I’d say yes. It’s well made, attractive in its own right, and can flex into a number of different roles. If my complaints dissuade you, I’d recommend keeping an eye on Spartan Blades in the meantime.

No products found.

I recommend purchasing the Spartan Blades Metis at BladeHQ, KnifeArt, and Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance ZT 0450 Review

by Benjamin Schwartz 3 Comments

Despite positioning itself as a maker of hard use tools for hardcore individuals, Zero Tolerance has always had more universal appeal than its marketing would suggest – and I don’t think the company’s appeal has ever been wider than it is today.

Unlike sister brand Kershaw, there isn’t any internal division between ZT products: there aren’t ‘cheap’ and ‘expensive’ ZTs in the sense that there are cheap and expensive Kershaws; everything they make falls within the same general bracket of impressive machining and high-end materials; the price differences just indicate which high materials you’re getting and how much impressive machining you see.

Buy the Zero Tolerance 0450 at BladeHQ

Buy on Amazon

And while ZTs may have been considered pretty pricey back in the day, as the market has shifted upwards their prices have remained relatively consistent, so that they seem more reasonable now than they did five years ago. So as the knife world has shifted into its current strata of price brackets, Zero Tolerance has found itself in a sweet spot between accessibility and quality.

All of this combines to put ZT pretty much at the center of current knife enthusiast culture. I’m sure there are soldiers, cops, and first responders who carry and use Zero Tolerence knives, but I would bet there are a lot more ZTs in the pockets of enthusiasts and on the shelves of collectors. That being said there has never been a ZT knife that really spoke to me.

I couldn’t find one that was ‘just right;’ this knife had a great design but is assisted, that one was the right size but inordinately heavy. It is this way for me with every knife ZT releases. Eventually, waiting for the Perfect Zero Tolerance became a kind of mania. Perfect design, perfect size, perfect price: I figured if I waited long enough such a ZT would come out.

But it never did, and eventually I got tired of waiting and picked up the knife that came closest to that ephemeral, unrealized Perfect ZT I have in my mind: the Dmitry Sinkevich-designed ZT 0450. It can’t possibly be perfect, but is it any good? Let’s take a look.

General Dimensions and Blade Details

The 0450 has a blade length of 3 3/16”, a handle length of 4 1/8”, and an overall length of 7 3/8”. It weighs 3.04 oz. and is made in the USA. I want to mention here that this is a damn good looking knife. It comes up later and I don’t want to keep repeating myself in the interim, so just keep in mind that almost every inch of this knife is nice to look at.

The ZT 0450’s racy drop point is a good EDC cutter. It has much more straight edge than belly, which I don’t necessarily mind, and a very sharp tip. A chunky grind means two things: 1) both the tip and cutting edge are hardy enough to beat on, however 2) it isn’t as good of a slicer as you would hope for. Given the fast, futuristic, aggressive styling I was hoping for equally aggressive cutting performance but that isn’t what you get here.

However, trading some sliciness for durability isn’t exactly Faustian as long as cutting performance is still the favored attribute to some degree, and the 0450 meets this criterion. It’s best-suited for medium-duty tasks like cutting through cardboard or plastic, but you aren’t going to hate slicing food with it either. It works.

When Zero Tolerance began using Elmax a few years ago accusations of improper heat treating and burnt edges were leveled at them from the enthusiast quarter. The 0450 is made from S35VN, not Elmax, but there is a small portion near the tip of my 0450’s blade that looks burned:

From what I understand, this occurs during the edge grinding portion of manufacturing, and is localized to the burned area – in other words, if it is burned, it shouldn’t affect the performance of the edge in general – and my experience bears this out.

S35VN is great. I would almost say it’s boring, because it doesn’t have the epic abilities and tragic flaws of a steel like M4, but for the average user (and most enthusiasts are average users AT BEST) that is a good thing. I’m convinced that you could sharpen S35VN with even a rudimentary setup and some patience. The S35VN here performed just as well as I expected it to, and if there were any problems in the burned portion I didn’t notice.

Handle, Ergonomics, and Pocket Clip

One of my biggest ergonomic pet peeves is when a knife has a beak or a scoop at the butt end of its handle that either doesn’t accommodate all four fingers ahead of it, or that makes my fingers feel crammed because it ushers them too close together. I really want this issue to become the Too Many Finger Grooves of 2017, because it nearly ruined the Para 3 for me and designers need to stop doing it.

By all accounts it looked like the 0450 would have this problem, and even now I’m not sure that it doesn’t. I can get all my fingers between the finger groove and the beginning of the beak, but not easily, comfortably, or without premeditation; my fingers would never fall across the handle this way naturally.

But the way I think you’re supposed to hold the knife is how I ended up holding the Para 3: with my index finger in the groove, my middle and ring in the “valley,” and my pinky landing on the far side of the beak. This feels natural, but, again, it isn’t the natural way my hand wants to hold the knife.

If I just grab the knife without thinking, my pinky lands right on the tip of the beak. This doesn’t sound like it would be comfortable, but thanks to the big chamfer around the scales, the tip of the beak isn’t too pointy and it works. And even during hard cuts this wasn’t that uncomfortable because most of the pressure is focused on the portion of the knife between your thumb and forefinger.

So I don’t know where I come down on this. The way it appears the knife is designed to be held isn’t natural, and the way it seems natural to hold it doesn’t feel right, even if it isn’t intolerable. At the end of the day I guess I’m okay with this handle, because it allows for a very slim and stylish profile, and going into it you know the 0450 isn’t going to be an ergonomic masterpiece.

The 0450 itself is so very narrow that it would be a pretty decent carry regardless of what kind of clip it had. This is one of very few flipper knives whose flipper tab doesn’t annoy me in the pocket, and I think that’s a function of the knife’s extreme narrowness. The 0450 would be a great carry even with a bad pocket clip, but hey: the clip here is anguish free. The same clip seen on the Kershaw Dividend, and in that review I expressed a little anxiety about its stability over time, but I’ve had no issues here.

Deployment and Lockup

I’m going to grouse a lot in this section so I’ll say this up front: The ZT 0450’s action is fast, sure, very snappy, addicting, and fun. The flipper tab is well designed. It is a great example of why flippers are so hot right now. Okay, grousing starts now.

I was prepared for the lock bar issue, and it is definitely present: if your fingers are on anywhere on the lock bar, the detent is such that the knife will not open – it feels almost like you have a secondary safety feature engaged. When I first got the knife I had a couple attempted deployments where the blade refused to budge.

However, if you align your fingers with the clip it keeps them off the bar; now that’s where my fingers naturally goes when I flip open this knife. Still, not cool, and from what I’ve seen it’s present on newer models as well. I’d like to see ZT put this issue to bed.

I think ball bearing pivots are bad. I hope the recent issues with the Advocate will precipate a move back to traditional washers, which are more durable, have no moving parts, are easier to maintain, and don’t cause as much unnecessary wear. Ball bearings against naked titanium (as we have on the 0450) is probably asking for trouble in the long term – albeit in the long, long term that most of us won’t see, as we trade and swap knives and carry different ones on different days. But still.

I also think that the ZT 0450’s fall shut action is dangerous and not to be desired. I’ve cut myself more times on the ZT 0450 than any other knife I’ve owned, either because it rolled shut so fast I didn’t have time to get my knuckles out of the way, or I pushed it a little bit and it gained enough momentum to keep rolling when I didn’t want or expect it to. Not necessary.

Lockup via titanium frame lock with a steel insert, is good however. If you look at the knife from the side, it doesn’t seem that a lot of the blade tang actually makes contact with the lock face, and disengagement has no feedback or friction whatsoever, but there is no blade play and the lock has never been other than stable and reliable. The double over-travel stop provided by the insert and by the clip is a nice touch as well.

Zero Tolerance 0450 Review – Final Thoughts

There is no meaningful area in which the Zero Tolerance 0450 excels other than carry. It isn’t a great cutter. Ergonomically, it’s kind of a mess. The deployment is problematic. But I still like it.

As much as I hate to say it it comes down to the look. Sinkevich has one of the strongest aesthetics around and the 0450 benefits greatly from that. It isn’t my style necessarily, but we don’t see a lot of knives that are this visually confident, and I think I responded to that. If you showed me a less interesting design that had all of these quirks and problems, I would never even think of buying it.

Not exactly the resounding praise, but praise nonetheless. I can’t not like this knife, even if there are so many things about it that I don’t like. It stops just short of brilliance but looks stunning doing it.

Sale

Zero Tolerance (0450); With 3.25” DLC-Coated S35VN Stainless Steel Blade, All-Black Carbon Fiber and Titanium Handle Scales, KVT Ball-Bearing Opening, Frame Lock Reversible Pocketclip; 2.45 OZ., Silver, Small

Titanium frame lock houses hardened steel lockbar; frame lock secures blade in position so it does not close accidentally
Flipper works for left- and right-handed users; assists blade’s manual release with one-handed convenience
Finger guard, jimping and choil protect fingers during rigorous use while slicing, cutting, chopping, scaling, slashing, piercing or digging in any environment, in any conditions
Drop-point tip provides extra strength and chip resistance and eliminates pitch momentum
Overall length: 7.4 inches; closed length: 4.1 inches; blade thickness: 0.121 inches; weight: 2.9 ounces

I recommend purchasing the Zero Tolerance 0450 at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kizer Alter Ego Review

by Grayson Parker 1 Comment

Last Updated: September 7, 2019
Kizer’s 2017 catalog wasn’t released to the same fanfare as Spyderco’s or KAI’s. That may be partially due to the fact that it’s massive. Most of their old designs are still on there, so don’t worry, there’s no need for panic purchases a la Spyderco’s discontinued list. At the same time, Kizer has collaborated with a host of new makers so up and coming your plaid-bedecked neighbor who won’t shut up about vinyl records hasn’t even heard of them.

Buy the Kizer Alter Ego at BladeHQ

Buy on Amazon

In the interests of full disclosure, you should know that this review sample was provided by Kizer. While that won’t have an impact on my impartiality, there is the risk that the product I was sent was double or triple checked for quality, and that my sample is the best of the brood. That risk is counterweighted by Kizer’s deserved reputation for high manufacturing tolerances. In other words, I don’t think you need to worry about it.

The Kizer Alter Ego falls into their “Bladesmith” line, which is seemingly reserved for collaborations with custom makers. I was surprised to learn this, as the Alter Ego seems aesthetically similar to many of Kizer’s in-house designs. Searching for “Kim Ning” and “Kim Ning Knives” yielded no results outside of Kizer products. It may be that he is better known internationally, or that he doesn’t have an English website, but I suspect that (much like Jim McNair of KAI) he’s a full time designer for Kizer.

General Dimensions and Blade Details

The Kizer Alter Ego has a 3.55” blade housed in a 4.625” handle. Overall, it’s 8.125” long and weighs 4.91 oz, with a blade thickness of .1375”. For some this isn’t terribly large, but it’s definitely more knife than I’m accustomed to. To their credit Kizer kept the weight pretty low. As a point of comparison, it weighs only .6 ounces more than the Zero Tolerance 0900, but has a .85” longer blade. Those numbers might not look impressive on paper, but trust me when I say that the difference is significant in person.

The blade itself is made of S35VN, a powder metallurgy steel developed by Crucible as the successor to S30V. Prior to the revolution of high-end Chinese manufacturers, a steel like this would have been unheard of on a Chinese knife. Times have changed, and now it’s sound business sense for companies like Kizer to import high performance steels. S35VN is a particular favorite of mine. It retains S30V’s wear and rust resistance, but doesn’t chip as frequently. I’ve used the Alter Ego frequently (if not rigorously) over the past month, and the experience matched my expectations.

As nice as the S35VN is, I wish it had been paired with a plainer utilitarian blade. The Alter Ego sports a drop point blade with a profile that echoes the Viper Dan 2 or the ZT0770 (both blade shapes that I love), but which is drawn up into a recurve closer to the base of the blade. While by no means a dramatic recurve, it exaggerates the belly enough to make certain tasks – press cutting in food preparation, for example – less predictable than a continuous curve or a straight edge. If I found myself cutting rope on a regular basis the recurve would have more appeal, but my needs are fairly pedestrian.

Handle, Ergonomics, and Carry

Much like the blade, the handle is comprised of organic, muscular lines. In some respects it’s comparable to the Hinderer design aesthetic, but where Hinderer relies on hard angles and a very industrial appearance, Kizer turns to curves that are almost anatomical. In keeping with this, ornamentation is kept to a minimum. I’m not normally a fan of decorative pivots, but Kizer’s rendition is eye-catching, subtle, and most importantly is torx compatible.

The ergonomics on the Alter Ego are good, if narrow in application. It’s difficult to tell from the photos and product literature, but the handle coerces your fingers into something akin to a pistol grip. That’s not necessarily a downside, especially if you’re in the market for a tactical folder. This knife won’t leave your hand unless you want it to. However, it’s less than ideal for everyday tasks, such as preparing a picnic lunch or opening a clamshell package.

While the design is ergonomically sound, if not to my taste, there is one flaw in the execution: the pocket clip. It’s not offensively bad (like this little guy), but it does generate enough of a hot spot to cause some discomfort. Gloves and careful finger placement mitigate this problem. The clip aside, Kizer put a lot of work into making this knife comfortable. All the edges are buffed and all the corners are softened. Kizer clearly knows how to make a knife comfortable.

The Alter Ego is pretty quiet in the pocket. No one could call it svelte – it is fairly wide, and nearly an inch of the handle sticks out past the edge of the pocket – but for a knife this size, it’s better than I expected. The aforementioned contouring keeps it from feeling like a brick in your pants, and though the clip detracts from the blade’s ergonomics, it also ensures that an errant seat belt can’t make off with your rather expensive pocketknife.

Deployment and Lock-Up

As with most of Kizer knives, the Alter Ego’s blade is deployed via flipper tab. Sadly, Kizer committed something of a cardinal sin in the design stages of the Alter Ego: they put aggressive jimping right under the flipper tab. For the first two or three days I carried it, my index finger would slam right into the aforementioned jimping every time I flipped it open, leaving my finger raw and smarting. Eventually my technique improved and the problem went away, but it was a literal pain to deal with. It’s a shame that such a flaw wasn’t caught earlier, because otherwise deployment on the Alter Ego is perfect. The detent is crisp and firm, and there’s not a hint of grit in the bearing pivot. It’s not as snappy as the action on my ZT0900 – there’s more of a hydraulic feel to it – but that’s a matter of taste, not quality. Deployment on both knives is as smooth as glass.

Commensurate with Kizer’s reputation, the frame lock on the Alter Ego is perfectly executed. There is zero wiggle in the lock while deployed, and because of the steel insert there’s no break in period or risk of the lock face galling inappropriately over time. Since arrival, the lock has consistently engaged the blade tang at about 50%, though it should be noted that 100% of the steel insert engages the tang. Said insert also functions as an overtravel stop. To round things out, Kizer also milled a slight cut out in the handle to make the lock more accessible.

Kizer Alter Ego Review – Final Thoughts

At a price point that hovers between 160USD and 180USD, the Alter Ego is competing with the premier lines of most brands; within the genre – titanium framelock flippers – it’s directly competing with most of Zero Tolerance’s catalog. While I’m not going to wade into the waters of which brand I prefer (the gaming industry has console wars covered), I can say that the Alter Ego is as well made as any normal run ZT. That’s pretty high praise, all things considered.

End of the day, this knife isn’t for me. It’s too big for my purposes and definitely has a different end user in mind. That said, everything else about the knife – the manufacturing tolerances, materials, attention to detail – is fantastic, and clues me into just how much I’ve been missing out on by not trying a Kizer sooner. If the design of this knife appeals to you, I’d wholeheartedly recommend it. If the quality of the Alter Ego is representative of their entire catalog (and the community’s response indicates that such is true) then I wouldn’t hesitate to buy any Kizer knife if the design appealed to me.

Kizer Cutlery 4492 Alter Ego Framelock 4 5/8" closed

I recommend purchasing the Kizer Alter Ego at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.