Folding Knives

Spyderco Positron Review

Last Updated: August 5, 2019
The original Southard Flipper was a landmark knife for the Spyderco. The company’s first flipper, and a collaboration with popular knifemaker Brad Southard, the Southard Flipper helped prove the flipper concept for Spyderco and set the bar for things to come. Subsequently Spyderco released the Domino, an in-house Spyderco design, and the extravagant Rubicon, an over the top high end collaboration with Peter Carey. But everything leads back to the Southard Flipper.

Buy the Spyderco Positron at BladeHQ

Buy on Amazon

The Positron is Spyderco and Southard’s second collaboration. At first glance it more resembles a piece of modern art than a knife, blending Brad’s primitive lines with gleaming steel and carbon fiber. But the simplicity to Brad’s design belies a refinement matched by few knife designers. The Positron was a knife I couldn’t help acquiring.

General Dimensions and Blade Details

The Positron has an overall length of 7″, a 3″ blade, weighs 2.6 ounces, and is made in Taiwan. This is a smaller and more gentlemanly offering than the original Southard Flipper. A 3″ blade is appropriate for most settings, and 2.6 ounces is feather light. However, at slightly over half an inch thick, the Positron is a chunky folder. I may be spoiled by my Boker Urban Trapper, but at first glance the knife seemed very thick – especially given the thin and slender blade.

Speaking of blade, the Positron shares the same hook-nosed profile of many of Brad’s designs. This time things have been scaled down, and the gently curved spine meets with with a gently curved edge. There is a slight belly and the entire blade is set on a slight negative angle to the handle. Spyderco went with a full flat grind, and the blade has been given a sparkling stonewash over a highly polished finish.

Spyderco chose CPM S30V for the blade steel. I am not wild about this decision, especially for a higher end 2015 release from Spyderco. I would have preferred S35VN or CTS-XHP, but lets no kid ourselves into thinking S30V isn’t capable of peeling apples or opening mail – which is most of what I have done with the Positron. I also broke down a ton of cardboard boxes. It performed well. The bitingly sharp blade combined with a thin grind blade and fine finish make the Positron a good slicer. The narrow blade and thin grind remind me of a traditional knife, and it is slicier than the hollow ground Southard Flipper or the Domino.

Handle, Ergonomics and Pocket Clip

The handle is where things start getting interesting with the Positron. Spyderco and Brad decided to nest skeletonized stainless steel liners into a full 3-d contoured carbon fiber handle with a low profile black G10 backspacer. The result is a dramatic yet understated handle. The carbon fiber has been left with a matte finish, and there are no voids in the carbon fiber. The end result looks simple, but only because it has been executed with such technical precision. The fit and finish is perfect on my example, and it makes for an impressive knife.

This is a smaller handle, and a number of smart design decisions make the most of it. The thickness and deep finger choil make the Positron a natural in the hand. There is a short run of jimping on the spine and backspacer. Both serve their purpose to index and secure the hand. If you are careful you can perch your index finger on the small forward finger choil and choke up. There is no texture on the handle, but that never bothered me. The matte finish of the carbon fiber is not slippery, and the Positron is comfortable for normal use.

The Positron makes use of Spyderco’s wire clip. I have come to enjoy it on a variety of my favorite Spydercos, including the Sage 1 and Dragonfly 2. This is one of the most discrete pocket clips on the market, and I can easily clip this knife to a pair of slacks without raising eyebrows from co-workers or shredding your pants. The handle has been milled for ambidextrous clip up carry.

As far as carry is concerned, the Positron is thick, but at 2.6 ounces I never noticed it. It carries discretely. I have enjoyed my Positron in the office and in the back yard. It’s a versatile tool that you quickly forget is in your pocket.

Deployment and Lockup

This is a rare Spyderco folder that doesn’t feature a functional thumb hole. Instead, you get a “trademark” thumb hole and a flipper as your sole means of opening the knife with one hand. The flipper is snappy and pops the knife open easily enough, but it’s still possible to “flub the flip” if you aren’t paying attention. I’d put the detent strength at a “6” on a scale from 1 to 10, with 10 being ZT 0454 thumb chafing tough, and 1 being totally non-functional. So it’s a good flipper, but not on par with a Zero Tolerance 0562 (which I might peg at an 8). There are caged bearings inside and the action is smooth.

For lockup we have a nested steel liner lock. The lock engages early and the blade is free of play. Being a steel liner lock, there is no lock stick either. I like the liner lock for a couple reasons: the knife is lighter than if it had a titanium frame lock, and it gives the Positron more of a gents folder vibe. It’s a nice change of pace from all the framelock flippers that grace these digital pages.

Readers have commented that the jimped lockbar is a little difficult to disengage, because there is no cut out on the show side handle scale. I must have fat thumbs, because I never had a problem disengaging the knife, but I see what people are saying. This is worth mentioning.

It is also worth mentioning that blade centering is perfect.

Spyderco Positron Review – Final Thoughts

The Positron is a solid offering from Spyderco. I think it carries the torch established by the original Southard Folder and the Domino and moves things into an interesting direction. This is a more refined knife making use of real carbon fiber, nested liners, and 3-d machined scales. The blade is thin, the knife is a good size for EDC, and it carries well. It’s not as wild as the Rubicon, and strikes me as something that I actually want to carry. As usual, fit and finish from the Taichung Taiwan factory is superb. I showed the knife to my dad and he commented that it shared similarities to his Kershaw Skyline, an interesting observation that puts the Positron in excellent company.

I also think the price is fair for what you get. Retailing for well under $200, it almost seems like an affordable Spyderco – a rarity in a sea of $200+ offerings. It’s not a value monster like the Urban Trapper, but it’s not highway robbery either.

The biggest con I can come up with is that the handle is a little thick. It’s comfortable in hand, and I don’t notice the knife in pocket, but at over half an inch thick it still looks thick. The lack of a cutout for the lock release is another potential con.

Ultimately, this is a beautiful knife, and a step in the right direction for Spyderco. I look forward to seeing how their line of flippers continues to evolve. I recommend the Positron to Southard and Spyderco fans, and for those wanting a discrete and refined daily carry blade.

Spyderco Positron Flipper PlainEdge Fold Knife W/3.01" Blade

Made of highest quality material
Manufacturer: Spyderco
Spyderco positron Flipper PlainEdge fold knife w/3.01 inch blade

I recommend purchasing the Spyderco Positron at Amazon or BladeHQ. Thanks for reading.

Benchmade 940-1 Review

by Benjamin Schwartz 22 Comments

Last Updated: July 13, 2019
Benchmade is a company that prefers iteration over innovation. Most of the new knives fall comfortably, and somewhat uninspiringly, within the boundaries of its recognizable, slow-to-change design language. Even really good new Benchmade knives, like the Valet, aren’t that differently from the Benchmades of five, even ten years ago.

Buy the Benchmade 940-1 at BladeHQ

Buy on Amazon

I can understand Benchmade’s adherence to its own unchanging vision to a certain extent. When the stars align it results in some unforgettable knives. To my mind there are few knives under $100 that compare to the Mini-Griptilian as an all-purpose EDC knife, and I’ve always thought the 710 looked like an incredible large folder.

But, for a lot of folks, the Warren Osborne-designed 940 is the Benchmade knife, and one that I was long overdue in trying out – partly because I prefer smaller knives, and partly because in the gleeful, dizzying descent that is the first few years of knife collecting, you’re bound to miss a few standbys in all that whirl and headiness.

Once the honeymoon phase of my collecting was over, I wanted to settle down with a nice, mid-sized Benchmade, and started to consider the 940 seriously. By the time I was ready to pull the trigger the Benchmade 940-1, a ‘premium’ rendition of the beloved blade, had released.

‘Premium’ doesn’t always mean ‘better,’ (unless there are performance benefits to Damasteel I am unaware of), and, with Benchmade’s Gold Class models it also means a 100+% increase in price. Thankfully Benchmade kept the 940-1 in their Blue Class line – the standard line for knives intended to be used. And while there is an increase in price over the vanilla 940, all of the changes Benchmade made – the carbon fiber scales and the slightly retooled handle, S90V steel – are performance-oriented. In short, while the 940 was already a classic, and I would’ve adored owning it, the 940-1 is, to my mind, the ideal version of an already incredible knife.

General Dimensions and Blade Details

The 940-1 has a blade length of 3 7/16”, a handle length of 4 ¾”, and an overall length of 7 7/8”. The weight is the first indication that the 940-1’s premium materials were chosen with performance in mind: this medium-sized folder weighs just 2.44 oz. To put that in perspective: the Spyderco Paramilitary 2, a knife that is widely lauded for the way it crams a lot of blade into a fairly lightweight package, is more than an ounce heavier (still a wonderful knife though).

The 940-1 features the iconic Osborne modified reverse tanto blade shape. Normally when I hear ‘reverse tanto’ I roll my eyes and expect tacticool sub-par performance, but thankfully that is not the case here. As a mid-sized knife, the 940-1 does everything I would expect it to do well. Punching through cardboard, whittling, even slicing an apple – it’s versatile and accommodating. Like all the best blade shapes, you feel like it was designed to do specifically whatever task you’re currently performing. I don’t love it for fine or delicate cutting tasks, but really there’s only one larger folder I know of that works well in those roles (smooches, PM2, sorry I called you fat earlier).

This good all-around performance can be attributed partly to the grind. When it comes to blade grinding, Benchmade has a lot of bad habits – swedges, facets, that sort of thing. Indeed, on paper, this grind is a mess: big swedge, the thinning-and-then-thickening out of the blade, the somewhat bulbous tip. You’d think there would be no way to make this a good slicer, but the bladesmiths at Benchmade pulled it off – if only just.

The reverse tanto can slice, pull cut, pierce, everything. It’s hardy without feeling bulky. I can cut up plastic or wood but when I slice up an apple with it I don’t get that ‘driving a railroad spike’ feeling I do from my Strider PT CC. My 940-1 is adequately thin behind the edge, but with such a small primary bevel I can see (and have heard of) unnecessary thickness before the edge bevel. In short, it’s a fine line, but, on my 940-1, they managed to walk it and make a good performer out of a very flamboyant design.

The other half of the equation is the steel: S90V. This is an exotic steel. I use the word ‘exotic’ purposefully because, even more so than something like ZDP-189 or M390, S90V feels very different from your standard steels. Its edge retention is totally singular – not in terms of how long, but rather in what manner it holds an edge.

I’ve written at length about my preference for ‘clean’ edge retention, and S90V flies in the face of my predilection: even when very sharp I found its edge quite toothy. For a long time I thought I didn’t like S90V. I didn’t expect such vicious-feeling edge from a super steel.

But when I started testing the 940-1 for review, I came to appreciate it. Again, the 940-1 is a mid-sized knife, and for mid-sized tasks that toothiness is a boon: this thing chews through wood, cardboard, plastic, and other materials, with no appreciable diminishment in its cutting capabilities. S90V is aggressive, and I approve. Don’t let the classiness of the CF fool you: the 940-1 is a barbarian in a tuxedo.

Handle, Ergonomics, and Carry

The 940-1’s handle is a textbook example of the grip-neutral handle, and I love it. A straightforward, clean-lined handle that lets you hold it however you need to – more of this please, knife makers.

Whereas the vanilla 940’s handle is composed of two aluminum scales with a titanium spacer between them, the 940-1’s carbon fiber scales are separated by two gorgeous blue standoffs. There are nested partial liners, and everything feels sturdy and durable in the hand. The carbon fiber isn’t slick, and all the edges are rounded to avoid hotspots. The knife is slim and narrow: you will barely noticed this medium-sized knife in your pocket. The clip stays nice and low and doesn’t muck up your grip.

That clip is the standard Benchmade number, the same you see on the Mini-Griptilian – although here it appears to be Parkerized instead of painted. It’s a real B+ of a clip: better than adequate, less than stellar. I like the way at looks, and I like that it’s tough, because I’m pretty hard on clips, but in a perfect world the deep-carry butterfly clip from the Contego would come standard on the 940-1.

At least, if they can get the fit just right. I know Everyday Commentary did the swap and it worked great, but when I gave the Contego clip a try, it didn’t sit flush against the scales, and clacked obnoxiously every time I held the knife, so I went back to the default clip – which, lest we forget, is good at worst.

All of these good things come together and make the 940-1 a top-tier carry in-pocket. Narrow, thin, easy to retrieve, and totally unnoticeable in carry. Wonderful. Better even than my beloved PM2 (I’m sorry baby, come back!).

Deployment and Lockup

When you’re talking about an Axis Lock, deployment and lockup are intertwined, to the extent that the nature of the Axis Lock allows for a very recognizable, friction-free deployment. Once you break in an Axis Lock you have a glass-smooth deployment for years and years. I only own one other Blue Class Benchmade knife, a Mini-Griptilian, and as good as that feels to deploy, the 940-1 is even better: this thing closes on its own if I disengage the lock and it is at any kind of angle. This is a classic Benchmade-ism I wouldn’t change.

Here is a shot of the 940-1 next to the Spyderco Para 2:

The only downside to this super-smooth deployment is a modicum of side-to-side bladeplay. Not enough to worry me on my pass/fail system for bladeplay, but definitely noticeable. But I’ve personally never had a larger knife that didn’t have a little play. It doesn’t make cutting any harder, and it doesn’t signify a weak lock. If I were using this knife for hard-use tasks it might bother me more (and I also wouldn’t want an Axis Lock for true hard use), but in the sort of things this knife is designed to do, it’s great.

And here is a parting shot of the 940-1 next to the Benchmade 551-1 G-10 Griptilian:

Benchmade 940-1 Review – Final Thoughts

When I first picked up the 940-1, I was really hoping that it would quickly get discontinued so that it became a collector’s piece and I could flip it for an exorbitant, Hinderer-esque profit. Now that I’ve really thought about the thing, though, I’m glad it’s still around. I’m fairly comfortable calling this the version of the 940 to get: you get a really rad steel and better-looking and lighter scales on top of all the other things that make the 940 a classic, and it deserves to be carried, used, and loved by as many people as possible. And when you consider that, depending on where you shop, you’re only paying about a $70 premium for it, it seems like a no-brainer.

The 940-1 is the best version of one of the best pocket knives ever designed.

Sale

Benchmade - Osborne 940 EDC Knife with Black Carbon Fiber Handle (940-1)

ALL-AROUND UTILITY: A quintessential EDC tool that combines simplicity with unmatched function, no matter the application; Ideal for pretty much everything.
HIGH-END CPM-S90V STEEL: Uniform microstructure gives it a superior edge when it comes to wear and corrosion resistance ; Reverse tanto blade is nimble, versatile, and made for the outdoors.
ULTRALIGHT CARBON FIBER HANDLE: Exceptionally strong with a featherweight feel in the hand and gnarled texture across the board for a sure grip
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Standard clip; Light as a feather for easy carrying and a comfortable grip.
EVERYDAY CARRY: With its slim profile and lightweight design, the 940-1 is the perfect addition to your gear collection, backpack, survival kit, tackle box, and more.

I recommend purchasing the Benchmade 940-1 at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Victorinox Alox Pioneer and Electrician Review

by Grayson Parker 6 Comments

There are few companies which possess the brand recognition that Victorinox does. At one time, they were one of the co-producers of the Swiss Army Knife. In 2005, they purchased their ailing rival, Wenger, and have since consolidated the two brands under one label. For many, the word “pocketknife” is synonymous with the little red handle and silver cross of the Swiss Army Knife (or SAK).

Buy the Victorinox Pioneer at BladeHQ

Buy on Amazon

Much like traditional folders, these multitools possess a certain charm that declassifies them as weapons in the mind of the general public. Most people are familiar with the plastic handled models: they are cheaper, and more widely available in “big box” stores such as Walmart and Target. Although offerings such as the Classic and the Spartan are ubiquitous, they aren’t the best that Victorinox has to offer. In my opinion, that title is reserved for the Alox line of multitools.

“Alox” SAK’s were first introduced in 1957 and represented a fundamental shift away from the original design of the Swiss Army Knife. This variant – the Pioneer – featured aluminum handles, a cigar shaped handle, and a bottle opener in addition to the main blade, awl, and can opener. It was originally intended for civilian markets, but a reputation for sturdiness prompted the Swiss armed forces to adopt it. The Soldier (a cosmetically modified Pioneer) was issued to Swiss troops from 1962 until 2008, when it was replaced by the Soldier 08. Fortunately, Victorinox still produces the Alox line, though it hasn’t been updated in quite some time. Today I’ll be looking at two very similar models in the 93mm family of tools: the Pioneer and the Electrician.

General Dimensions and Tools

Each model features four identical tools: a main blade, a combination flathead screwdriver/bottle opener, and an awl. The Pioneer has a can opener (with a smaller flathead driver on the tip), whereas the Electrician has a 1.6” long sheepsfoot blade. Both have a closed length of 3.7”, a blade length of 2.8”, and an overall length that’s just under 6.5”. Finally, each of them weighs around 2.5 oz. All of these numbers are pretty comparable to similarly sized traditional knives. That’s quite an impressive feat, considering the number of tools Victorinox managed to fit onto these things.

I’ll be the first to admit that 99% of the time I’m just using the main blade or the bottle opener, but the other tools are well designed and occasionally save the day. Ironically, I’ve found that having the odd tool like a can opener, a corkscrew, or an awl only becomes more important as companies move towards “tear along the dotted line” style packaging. Society is becoming used to not needing these small, handy tools. As a result, that can opener might not be in the kitchen drawer when you need it to be. Sure, you might look insufferably handy whipping out your Swiss Army Knife, but you’ll save someone a trip to the nearest store by doing so.

The materials here are fine, even in comparison to modern “tactical” folders. While the edge does need to be regularly maintained, it can be done just about anywhere. I’ve used the bottom of a coffee cup as a stone and a bit of cardboard (no compound) as a strop on more than one occasion, and the results aren’t much worse than what I get from my stones and strop at home.

This steel’s corrosion resistance is quite impressive—so much so that I’ve put my Cadet away wet without consequence. Chipping has never been an issue. All the tools fit neatly inside the aluminum frame without rubbing against each other or the scales, and crisply snap open and closed. It should be noted that Alox models do not have rear mounted tools; as a result of this, the backspring runs the entire length of the spine. As a result, the pull is much stronger.

Handle, Ergonomics, and Carry

Of course, the real differentiating mark between the Alox and the normal models are the ribbed aluminum handle scales. They’re slimmer, more durable, offer a better grip, and in my opinion are much more attractive. The anodization on every model I’ve handled has been quite good, though fairly prone to wear. On the silver models the wear is barely discernable, but with other colors you’ll see fading occur within hours of exposure to your keys.

None of this impacts the stellar grip. With a classic cigar shaped handle, gentle texturing, and slight chamfering, both the Pioneer and the Electrician are very comfortable in the hand. The keyring on the Pioneer is occasionally pokey, but less so than a pocket clip would be.

On paper, the 93mm knives should be great pocket companions. About a month of experience has poked some holes in that assumption. By no means are they awful, but carrying either of these knives is occasionally awkward. Both the Pioneer and the Electrician are just a bit too tall for the front and watch pockets of most jeans (though they’ll fit into the extra-large watch pocket of my work jeans). Additionally, while the handles are great in terms of grip and aesthetics, they’re pretty slick in the pocket. My first Alox Cadet disappeared on me, and I can only assume that it slid out of my pocket one day as I was lying down.

Both models will fit inside a KnivesShipFree Main Street slipcase, which is a great way to distribute the odd dimensions in a bit more comfortable fashion. If that’s not up your alley, the Pioneer has a keyring that you can attach a lanyard to.

Victorinox Pioneer Review – Final Thoughts

Personally, it’s hard to find something new to say about a pair of tools that are fairly well-known among gear aficionados. Neither is as svelte as the Cadet, but they offer longer blades, a more outdoor oriented set of tools, and a better grip. They’re a bit too large to play the role of a back-up knife, but make for a fine primary tool (especially around folks who get fidgety around modern knives). The handles are so classy that either of these could serve as a dress knife, yet the tools are rugged enough for just about any “prepper” scenario.

If I had to pick one of them, I’d pick the Electrician. I rarely use the keyring on the Pioneer, and the funky secondary blade on the Electrician is great for opening packages without worrying about damaging the contents. Both are tools that I’d recommend to anyone, especially at the $30 price point you can find them at.

Sale

Victorinox Swiss Army Pioneer Pocket Knife, 91mm

Sport type: Camping & Hiking

Victorinox Electrician Swiss Army Knife, 8 Function Swiss Made Pocket Knife with Electricians Blade and Wire Scraper - Silver

A CUT ABOVE THE REST: Compact, agile and ready to face any adventure head-on. Our range of Swiss Army Knives have been established since 1897 and continue to be an icon of utility and smart design.
DURABLE CONSTRUCTION: Swiss made stainless steel construction encased in our popular scales offers a slimmer profile and is extremely resistant.
COMPACT CARRY: Bring this knife with you on your daily adventures without sacrificing space. It makes a great gift for any occasion or stocking stuffer for Christmas.
FIT FOR ALL TASKS: At their heart, all our pocket knives are a survival tool; multitaskers that deliver in any situation. At their most evolved they have surpassed basic function to pioneer space travel and restart engines.
TRUSTED QUALITY: Made in Switzerland; Victorinox provides a lifetime guarantee against defects in material and workmanship. Making a lifetime commitment has never been so easy. No assembly required, money back guarantee.

If you would like to buy a Pioneer or Electrician, I recommend purchasing them at Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Boker Plus Urban Trapper Review

by Dan Jackson 32 Comments

If you have been following knife trends at all, you will know there is big interest in both titanium framelock flippers and traditional folding knives. So it shouldn’t take a rocket scientist to come up with the idea of combining these two trends, but they have really been viewed as two mutually exclusive phenomena. That is of course, until now.

Buy the Boker Urban Trapper at BladeHQ

Buy on Amazon

Enter the Boker Plus Urban Trapper. Designed by fellow Floridian and custom knife maker, Brad Zinker, the Urban Trapper is exactly what it sounds like: the melding of a traditional trapper pattern with modern features and materials. The end result, is everything you love about traditional folders (their light weight, and wickedly thin blades) combined with the bells and whistles of a titanium framelock flipper.

It sounds great, but given Boker‘s quality control issues some might pass this model over. That would be a mistake. This is arguable the best knife I have handled in 2015. No joke. Boker has had a spotty history with quality control, and their titanium framelocks have been notoriously bad, so I probably have my work cut out for me if I am to try and convince you that this is the best production knife I handled in 2015, but they absolutely slammed this one out of the park. Let me explain to you why.

General Dimensions and Blade Details

The Urban Trapper has an overall length of 7.75″, a 3.5″ blade, and the all titanium version (shown here) weighs a mere 1.78 ounces, is made in China, and currently retails for around $60. The knife is insanely light yet still packs a healthy 3.5″ blade. I am not one to bother with blade to handle ratios, but Brad used up every spare millimeter when cramming the blade into the handle. The end result is both thoughtful and elegant.

The Urban Trapper was designed to be an Every Day Carry (EDC) knife, and I have used mine in that capacity. Although the blade is on the long side, but it’s thin profile means I have not had any issues using the Urban Trapper in public. I think you could also argue this is a gentleman’s folder.

The blade of the Urban Trapper is an elongated clip point, featuring a lean clip with a thin swedge. It is definitely a modern take on a classic blade pattern, and isn’t your grandpa’s clip point. Most of the spine is taken up by the swedge, but the part that isn’t is capped (rounded). The blade has a high flat grind and precise tip. I have always found clip points to be utilitarian, and this version is no exception. The tip is excellent for detail work, and the thin grind slices like a traditional folder (meaning, it slices wonderfully).

An interesting detail on the knife is the satin finished blade. If you watch YouTube knife reviews of custom folders, you will invariably hear the reviewer go on about how the knife is “the best flipper I have ever handled” and/or gush over the “hand rub satin finish”. While I think both of those reviewer tropes are more than a little tired, I can’t deny that the blade is well done and the satin finish, running horizontally from ricasso to tip, was intended to mimic the hand rubbed finish of a custom offering. It’s a nice touch, especially at this price point.

Boker went with VG-10 steel for the blade, a middle of the road Japanese stainless. I don’t mind VG-10 on this knife given the price point. I have used my Urban Trapper quite a bit, and have had the chance to test it on a variety of materials. It’s great for breaking down boxes, and slices apples with ease. Speaking of slicing, the thin flat grind is a tremendous slicer, much like many of the traditional folders I have used like the Indian River Jack or Alox Cadet.

The UT also held up well as a utility knife. I have used the knife for several home improvement projects, cutting thick plastic and even wire in a pinch. I don’t recommend cutting wire with the Urban Trapper, but I didn’t have anything else on me at the time. The knife held up fine, although the edge definitely rolled. VG-10 will not hold an edge forever, but it’s an easy steel to sharpen. No issues with rust, and I routinely rinsed the knife out in the sink after using it.

Handle, Ergonomics, and Pocket Clip

There are a surprising number of details to enjoy when examining the handle of the Urban Trapper. The handle is comprised of 2 pieces of titanium and a single stand off. All of the edges have been neatly rounded, and a series of holes have been drilled into the handle to provide visual interest and lighten the knife. The holes are countersunk and the edges have been given a mirror polished edge. Everything has been executed flawlessly. There is a nice decorative pivot, and the seat of the pocket clip is inlayed into the handle. The titanium is given a tumbled finish which hides wear well. For a simple slab built handle, Boker did a lot to bring Zinker’s custom design to life.

If naked titanium is not your thing, Boker is also offering the UT with a variety of handle covers including Cocobolo, G10, and carbon fiber. I haven’t checked these out yet and prefer this minimalist version.

The Urban Trapper is a thin and lightweight knife, but it’s not cramped for space. I am able to get a comfortable grip on it without any issues. That said, there is not much in the way of traction on the handle. The stonewashed finish offers a little feedback. There is no jimping. It would not be my go to knife for a 3 month expedition through the Amazon, but it’s fine for urban EDC. I would suggest using this knife the same way you would use a slip joint. That said, I have gotten a lot of work done with the UT and I can say with confidence that this knife is comfortable for normal use.

The Urban Trapper comes with a nice fold over deep carry titanium pocket clip. The handle has been milled so the clip slots in to it and is held in place with 2 flush mount screws. This is nice because there is nothing for your pocket to get caught on when you insert the knife into your pocket. The drawback is that the knife is set up for right side tip up carry only. Not a big deal for me, but worth mentioning.

The UT carries well. At under 2 ounces you quickly forget it’s in the pocket. The knife is wafer thin and the clip is very unobtrusive. This is a fantastic knife for my style of daily carry.

Deployment and Lockup

The flipper tab on the Urban Trapper may take some getting used to. It’s squarish and has jimping, and I find that the knife opens best when you “light switch” the flipper by resting your index finger on the corner of the flipper tab. Personally I never had any problems getting the knife open, and I am able to push button the flipper too, but in reading up a bit for the review I noticed some people complain about the flipper. It works fine for me. The detent is solid and the knife is on a bearing system. It flips well, and fires hard. The action is smooth to the point where I can shake the blade closed.

For lockup we have a simple titanium framelock. There is no steel insert. Just simple titanium on steel. My knife locks up early (around 20%) and is secure and without play. This is after opening the knife hundreds of times and beating on it in a series of little remodeling projects. I realize Boker does not have the best track record with their titanium framelocks, but this Urban Trapper is trouble free after a couple months of use. I plan on keeping the knife and will update the review if anything changes.

Blade centering on my knife is basically perfect. The pivot has loosened up a couple times, but a twist of my allen wrench brings things back to true.

Boker Urban Trapper Review – Final Thoughts

Although I think it was released in 2014, the Urban Trapper is on my short list for “Best Knife of 2015”. For $60 I consider it a production folder masterpiece, blending two of the current hottest trends in knives while coming in at the notoriously tough $50-75 price range. When I first got the Urban Trapper I immediately compared it with another favorite of mine: the CRKT Swindle. The knives share some similarities: they are slim, inexpensive, bearing equipped framelock flippers. The Urban Trapper sells for twice as much, but I think it’s twice as nice of a knife. It’s much lighter and the pocket clip is way better. Well worth the price premium in my book.

And let me attempt to put any quality control fears to rest – my Urban Trapper has been problem free, and that seems to be par for the course based on my research. The fit and finish is excellent. There is no blade play, lock rock, or anything like that. Say what you will about Chinese knives, but this one is dialed in. The Urban Trapper truly is a combination of the things I love most about traditional folders (their pocketability, people friendly profile, and thin blades) with all of the creature comforts we have come to know and love with framelock flippers (one hand opening, pocket clips, lightweight materials). For $60 it’s a no brainer.

The Urban Trapper comes with my highest endorsement. It easily makes its way onto my best EDC knives page. There are nicer more expensive knives out there, but the Urban Trapper is a perfect storm of price, workmanship, and performance. This is something everyone can appreciate. Buy it and enjoy it. You can thank me later.

Boker Plus 01BO730 Urban Trapper Knives with 3-1/2 in. Straight Edge Blade, Silver

Vg-10 premium steel blade
Titanium frame lock
8mm grip thickness

I recommend purchasing the Boker Plus Urban Trapper at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

DPx Gear HEAT/F Review

by Dan Jackson 18 Comments

Last Updated: August 3, 2019
It has been a long time since I have examined a DPx Gear product. You may recall a review done on the HEST back in 2012. This was DPx’s first effort, and is the knife that put them on the map. The HEST is a solid tool and is well made, but there was a lot going on in terms of integrating various multi-tool features. There is nothing wrong with attempting to push the envelope and bring something new to the table, but the HEST was a DPx’s first crack at bringing a production knife to market.

Buy the DPx Gear HEAT/F at BladeHQ

Buy on Amazon

The HEAT is a more recent offering. First of all, this is a knife, not a multi-tool. I happen to like that. The idea was to shrink down the HEST to something a little more gentrified and pocketable, yet retain the distinctive styling of the HEST. I have long had an affinity for “little big knives”, and I still enjoy pocket knives that are small but stout. Sadly I have little use for a knife like the HEST in my day to day dealings, but the HEAT is something I could get away with carrying. I suspect I am not alone with that dilemma, which is why I was curious to get my hands on a HEAT.

General Dimensions and Blade Details

The HEAT has an overall length of 6.25″, a 2.375″ blade, weighs 4.15 ounces (4.35 for the full titanium version shown here), and is made in Maniago, Italy. The knife was made for DPx Gear by LionSteel. Clearly the HEAT was designed to fit into the role of an every day carry (EDC) piece, although it is very stout, and is not just built for opening up letters or slicing fruit. I have been carrying and using mind in as an EDC knife.

My particular knife is the full titanium 3-D machined version. The 3-D machined handles are stunning. DPx also offers the knife in a less expensive titanium/G10 combo and a titanium/carbon fiber version as well.

The blade is a simple drop point with a high flat grind and your choice of stonewashed or phosphate coated blade. Blade thickness is just shy of 4.6mm – very thick, especially for a sub 2.5″ blade. While the HEAT does not slice like an Alox Cadet, I found it plenty adequate to cut up apples, break down boxes, and even open the odd letter or two. Still, those expecting their pocket knife to produce translucent slices of tomato will have to look elsewhere – the HEAT is simply not that kind of knife. I’d say it slices better than a Strider SnG, but still remains below average in slicing ability. That said, the blade is above average in toughness and the integrated cap lifter / wave feature is a testament to that.

DPx went with Niolox steel, a steel I checked out in reviewing the Blackwater knives a few years ago (since discontinued under the Blackwater brand, but apparently rolled into DPx Gear’s regular lineup). When I tested those knives I found that Niolox held a good edge that was tough yet easy to maintain – an ideal balance for a largish fixed blade.

This is my first experience using Niolox on a folder. This is a servicable steel. It takes a very fine edge, holds it respectably, and is not difficult to sharpen. I might describe it as a tougher 154CM or CTS-XHP, which puts the steel in excellent company. A good choice for a tough little knife that doubles as a bottle opener. I had no issues with corrosion. Like all of my EDC knives, I find it is best to maintain the edge regularly rather than wait for the knife to dull completely. Between my strops and fine Sharpmaker stones, I have had no trouble maintaining a hair shaving edge on my HEAT/F.

I know the knife is also offered in Sleipner steel and D2. I have heard good things about Sleipner but confess that I do not have much hands on experience with it. D2 is perhaps a more well known US tool steel. It’s a hearty “semi stainless” steel that has high toughness but can be difficult to sharpen. I’d go for Niolox or Sliepner if I had the option.

Handle, Ergonomics, and Pocket Clip

The standard HEAT arrives with G10 and titanium handles. The lock side is full titanium, while the show side is your choice of green or black G10. My version features full 3-D machined titanium handles, featuring a beautiful diamond pattern. LionSteel is known for their ridiculous machining capabilities, and this all Ti version of the HEAT/F takes full advantage of that. The handles are curved, contoured, and wonderfully finished. Rounding things off are 3 standoffs (one for the pocket clip), an oversized pivot, and a removable carbide glassbreaker.

The HEAT is a comfortable knife. The handle is a good deal larger than the blade, which is a very practical way to design a smaller knife. I’d rather there be plenty of handle and a smaller blade than vice versa. The blade features an extended ricasso that helps form an integral guard, and the fingers rest naturally in the deep swooping finger choil. There is jimping on both the spine of the blade (very mild) and back of the handle (more aggressive, but still comfortable), and there is additional jimping towards the pommel for your ring and pinky finger. I used my HEAT for some fire prep. Now that things are starting to cool off a little in Florida, I tend to gravitate towards the back yard for fires and cigars. This knife is comfortable and you can get real work done with it.

DPx went with a deep carry pocket clip. Like the original HEST and many LionSteel folders, the clip is mounted on the absolute butt of the handle, and is configured for right side tip up carry only. I wish they would have allowed for ambidextrous carry. Being a lefty I always like to see ambidextrous clips, and think it could have been done without too much trouble with this style of clip. That said, the clip is precision machined into the handle, and the end result is seamless.

The clip has good retention and the knife buries deeply in the pocket. The HEAT carries well for a smaller, heavish knife. I quickly forget it is in my pocket until the time comes to use it. There is a small DPx skull logo on the clip, which won’t be to everyone’s taste, but is no different from virtually every other clip in my collection (they almost all have logos). I don’t mind it. All things considered the clip and knife is discrete; just the way I like things.

Deployment and Lockup

The HEAT gives you the option of ambidextrous thumb studs or bottle opener / wave feature to get the blade open. The thumb studs are simple and situated so that it is easy to get the blade open, and the blade rides on teflon washers. The action is smooth and the blade snaps open with a crisp and satisfying feeling. The wave works well if you want it to and carry the knife in your right pocket. I carry the knife in my left pocket, so I generally do not make use of the wave. That said, as part of the review process I waved the knife open dozens of times. It works as you would expect it to, with no ill effects on the lock (more below).

The blade of the HEAT is secured by a titanium frame lock. My lock engages early (around 40%). There is a slight amount of stick – not enough to make disengaging the lock obnoxious, but enough to make for a snug and secure lockup. I detected zero blade play in any direction after weeks of carry and use. Although I am generally not a big fan of wave openers, I made a point to wave this knife open regularly and the lock shows no ill effects. Blade centering on my knife is close to perfect.

DPx HEAT Review – Final Thoughts

The HEAT is probably my favorite knife in DPx’s catalog. I am a sucker for small high quality knives. The HEAT strikes a good balance between being a carryable cutting tool, and being overbuilt and aggressively styled. Although Robert Young Pelton and DPx Gear are a relative newcomers to the cutlery industry, his eye for design is undeniable, and the lines of the HEAT flow pleasantly whether the blade is open or closed. This is an interesting riff on the original HEST/F design, and is a step forward if you ask me. The bells and whistles of the original HEST/F have been stripped away to showcase a well designed knife that retains both personality and performance.

That said, the HEAT will not appeal to everyone. The overbuilt blade and full titanium handles come at a cost – the knife has some heft to it, and it will not slice like a slip joint. This is for someone that enjoys overbuilt folders, but doesn’t want to be bogged down with a 3″+ blade and 5 ounce+ footprint. I enjoy the HEAT/F for what it is. It has been well considered, and beautifully executed. The fit and finish is excellent and the materials are top notch.

If you like small overbuilt knives, the HEAT is well worth considering. I am curious to see how DPx Gear will continue to evolve their line of folding knives.

DPx Gear DPx HEAT/F,2.26 Folding Knife,Olive Drab,Left-hand DPHTF003

Folding Knives, Knives & Tools

If you want to buy a DPx Gear HEAT, I recommend purchasing it at Amazon or BladeHQ. Thanks for checking out the review.

Spyderco UK Penknife (UKPK) Review

by Benjamin Schwartz 3 Comments

Last Updated: August 12, 2019
For a long time I believed that the Delica was not a well-designed knife. I realized recently, however, that what I actually meant was that, compared to many other designs in the Spyderco catalog, the Delica is simply outdated. Everything that I find irksome about it – the compromised ergonomics, VG-10 steel, lack of a forward choil – has been fixed in other, similarly-sized designs.

Buy the Spyderco UKPK at BladeHQ

Buy on Amazon

Not least among these better designs is the Caly 3. An improvement over the Delica 4 in just about every way, the only issue with the Caly 3 is that it’s two to three times the price of the Delica, depending on which flavor you choose.

But there’s a much less-well-known knife in the Spyderco catalog, a knife that is essentially a super lightweight, slipjoint Caly 3, and that costs only about as much as a Delica. It’s called the UK Penknife in FRN, a truly underrated knife, and one that I think is well worth checking out.

General Dimensions and Blade Details

The Spyderco UK Penknife lineup is kind of confusing. The first version, a G-10 model, was released in 2004, designed to conform to knife laws in the United Kingdom, which are stricter than those in the US. In 2005 the DKPK, a variant with a non-functioning Spyder Hole designed with the even stricter Danish knife laws in mind, was released.

In 2010, the Lightweight models were introduced, with FRN handle scales instead of G-10. These models came in three different handle colors, with two different blade shapes, each available with plain, partially-serrated, or fully-serrated edges.

In 2012, most of the color and edge options were discontinued, leaving only the black-handled models, and in 2013 the grind was changed from a hollow/saber grind to a full-flat one. My particular UK Penknife is from the discontinued generation, with maroon handle scales and a leaf-shaped, plain edge blade. The only difference between the currently available model and my own is the grind, which I will discuss below.

History aside, here’s what we’re looking at with the UK Penknife: a blade length of 2 15/16”, a handle length of 4”, and an overall length of 6 7/8”. It weighs just 1.9 oz; this weight is achieved not only because there are no liners beneath the scales, but because Spyderco rather brilliantly shortened the length of the spring, so that it only runs out to only about 60% of the spine; here’s a picture of it:

The UK Penknife is made in the Spyderco’s Golden, Colorado factory. On my particular knife, the fit and finish was superb. Everything was nicely finished and pleasing to the eye. The thing I could take issue with is the slightly sloppy edge grind: on side the bevel terminates earlier than the other. Of course, this doesn’t affect performance, so it’s not something I’m losing sleep over.

The Spyderco leaf shape blade has proven its utility over many years, across many knives. The UK Penknife’s particular rendition is almost exactly the same as that of the Caly 3’s, which means a narrower blade profile than something like the Sage knives or the Native, and with a better, more acute tip than the snub-nosed Delica. Like a traditional drop point blade, the leaf shape is a winner not so much because it excels in any one category, but rather because it has a such a wide vocabulary of use: cutting, piercing, mild prying, digging; the leaf shape can do it all.

As good as the blade shape is, the grind on my UK Penknife is a sticking point. It’s a hollow saber grind, and, like the similar grind on some Delica 4 models, it just doesn’t slice all that well. Compare it to the Caly 3’s full flat grind, and it isn’t even close. As Grayson pointed out in his Aculus review, there are definitely a lot of cutting tasks that don’t require slicing, but the fact is that in the case of the UK Penknife, a full flat grind would have just worked better: you would get slicing performance without losing anything. Spyderco must’ve realized this, because the newest model is full flat ground, and that knife, I am sure, would both cut and slice with aplomb.

The UK Penknife’s blade is made from CTS-BD1 steel. This is an American stainless steel that’s really only seen in Spyderco knives, but one that I really like. I think of it as a next-generation entry-level steel. It holds an edge better, and is less rust-prone, than AUS-8 or 8CR13MoV, and sharpens much easier than VG-10. The thing that I like best about it, though, is that it keeps what I call a ‘clean’ edge: that is to say, as it dulls it doesn’t get toothy or cut any rougher, even if it gets more difficult to make a cut. I’ve always cited N690Co as a steel that keeps a clean edge; BD1 is right up there with it. Also worth noting is the finish on my UK Penknife: a muted, mild stonewash, it’s something I haven’t seen on any other Spyderco knife, and it looks really nice.

Handle, Ergonomics, and Carry

The UK Penknife’s Caly 3 heritage really comes through in the ergonomics department. A handle with simple, unobtrusive contours, it manages the amazing trick of making any grip you care to hold it in seem like the one it was designed for. The forward half-and-half finger choil, a Spyderco staple, is characteristically excellent, giving you control over the blade during use.

Some people don’t like the feel of FRN. I can understand that: in some knives, it feels cheap, flimsy, a compromise rather than a considered choice. However, not all polymers are created equal, and the FRN that the UK Peknife is made from appears to be top shelf. I wouldn’t ever say it feels luxurious or anything like that, it exudes quality. I particularly like that the edges are all rounded over, imitating the smooth, comfortable feel of chamfered G-10 or titanium. In fact, I prefer the FRN scales of the UK Penknife to the CF laminate and steel liners of the Caly 3; they’re more comfortable and durable.

The wire clip is the same one on the Caly 3, the deep-carry wire clip. I don’t really know if I understand the ‘advantages’ of deep carry, but with so many terrible clip designs on the market right now, I’m just happy with something that works, even if I personally would prefer the spoon clip for its rigidity: I have broken two wire clips in the past.

Deployment and Lockup

Because it is a slipjoint, the UK Penknife opens a lot slower than locking knives: the tension of the spring against the tang remains all the way through the deployment process, generating friction. This doesn’t mean that you can’t flick the UK Penknife open; you can, but it takes a little finesse to do so, and really, I don’t mind just slow-rolling it open. There’s an interesting sort of very mild half-stop too, which I like because it, along with the audible snick you get when the knife is fully opened, gives you plenty of feedback while opening it.

When open, the UK Penknife feels very secure. Like the Pingo, it doesn’t take a ton of force to close it, which I prefer: I don’t like wrestling with my slipjoints to close them. I feel like the UK Penknife will be plenty safe in any reasonable role. But beyond this, holding the knife with your forefinger in the half-and-half choil, you create a sort of lock with your hand – a very nice touch that is echoed in many of Spyderco’s slipjoints. Needless to say, with any cutting tool, and in most real-life cutting tasks, good sense will do more work than a lock would in preventing accidents.

Spyderco UK Penknife Review – Final Thoughts

The version of the UK Penknife that I have is a near-perfect, lightweight, lockless version of the Caly 3, hindered only by a weird grind. The 2013 UK Penknife fixes that issue and might just be the best entry level-priced Spyderco on the market.

Once you get in the $80-120 range, the competition gets a lot fiercer, but even compared to the those knives – the Spyderco Native 5, the Chapparal, the Paramilitary 2 – the UK Penknife is not without its appeal. For a knife based off one of the perennial darlings of the Spyderco lineup, the UK Penknife is a surprisingly underrated gem.

Spyderco UK Penknife Leaf Lightweight Folding Utility Pocket Knife - Black FRN Handle with PlainEdge, Full-Flat Grind, CTS BD1 Steel Blade and SlipIt - Everyday Carry - C94PBK

Leaf Shaped Blade: A blade shape developed and refined by Spyderco. It is similar to a spearpoint, but not completely symmetrical, and has a more acute point and typically no swedge.
SlipIt: A non-locking system that combines the convenience of clip carry and one-hand opening with a socially friendly notch-joint mechanism that helps hold the blade safely open during use, but does not mechanically lock it.
FRN Handle: Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles.
Full-Flat Grind: This knife features a blade ground with flat bevels that extend from the spine all the way to the cutting edge. This grind reduces drag during cutting and decreases overall weight.
Specifications: Closed Length (Inches): 3.95, Overall Length (Inches): 6.88, Blade Length (Inches):2.93, Blade Steel: CTS BD1, Grind: Full-Flat

If you want to buy a Spyderco UKPK, I recommend purchasing it at Amazon or BladeHQ. Thanks for reading.