Marcin Slysz

Spyderco Spydiechef Review

I didn’t get it. After tearing open the box and turning the knife over in my hand, I simply didn’t get it. Flat colors. Slow deployment. Boring construction. This is the legendary Spydiechef? It’s a weird-shaped blade sandwiched between two pieces of gray titanium, with a retail price of $215. What manner of magic has bewitched my fellow knife lovers?

Buy the Spyderco Spydiechef at BladeHQ

And yet, I seem to land smack in the middle of the Spydiechef’s target market: Knife guys (check) who care deeply about edge retention and rust resistance (double check) and encounter a variety of daily cutting tasks (indeed) while also cooking on the go with some degree of regularity (bingo).

Designed by the legendary Marcin Slysz and manufactured by Spyderco’s wizards in Taiwan, this knife should be right up my alley. And, while it may not have been love at first sight, the Spydiechef spent the last few weeks working its way to the head of the table.

General Dimensions and Blade Details

Dimensionally, there’s nothing too special here. You’re looking at a 3.32-inch blade, with a thickness of just under 0.12-inches. The handle/closed length is a middling-sized 4.46-inches, stretching the overall number to 7.78. Weight is low (3.8-ounces), thanks to the Chef’s flow-through titanium chassis. You’ve got the standard Spyderco wire clip, which can be mounted on either of the side slabs. Boring bronze washers, a snooze-inducing frame lock, and *yawn* a lanyard hole.

Here is a size comparison with the Spyderco Shaman:

But, it’s not the specs that make the Spydiechef such an excellent knife. It’s those delicious details that will bring one into my permanent collection.

Let’s start with the blade. Its LC200N steel has been formed with some sort of metallurgical witchcraft. While we’ve seen “rust-proof” steels before, such as H1 on Spyderco’s Salt line, this stuff is a whole new animal.

Here’s what the maker has to say about LC200N: “This state-of-the-art nitrogen-based alloy is extremely corrosion resistant and is actually used by NASA for the ball bearings used in aerospace applications.” Sounds great, but ball bearings aren’t known for holding an edge.

This is where Youtubers like Pete from Cedric & Ada come into play. His barrage of edge-retention and corrosion tests has established LC200N as one of the premier steels for EDC tools. While I didn’t subject the Chef to these sorts of extreme conditions, I can confirm that it showed no sign of rust after multiple cooking sessions. I’ve used this knife almost every day since it arrived, and the edge has yet to dull or dim.

The Chef’s blade shares two traits with many of my favorite cooks – It’s friendly to strangers, and it’s all belly. Despite its 3-plus inches of shiny steel, the graceful curve of Slysz’s design is easy for even the more paranoid to stomach. And, thanks to its flat grind and Nick Shabazz sharpening job, it’s been a slicer since day one.

Handle, Ergonomics, and Pocket Clip

The Spydiechef’s handle is gray, like the color of boiled meat or the hair of an overworked cook. This titanium blandness was at least partially responsible for the knife’s poor first impression. But, once I got it in the hand, the subtlety of Slysz’s design became immediately apparent.

Take a look at my hand position:

Beyond its ergonomic excellence, the curve of the Chef’s titanium handle offers a significant advantage in the kitchen. It keeps the edge (mostly) below my knuckles, greatly easing the slicing and chopping process. Not as much as a dedicated kitchen knife, sure, but more so than any other folder I’ve handled.

The pocket clip offers another bit of subdued excellence. On the surface, it appears to be just another iteration of the classic wire clip. But take a look at that angle. It allows the knife to curve down and into the back of the pocket, keeping it out of the way of whatever else you may be carrying.

There are a few caveats here. While the reversible clip makes this technically an “ambidextrous” knife, the placement of the lock bar in relation to the Spydie-hole will make one-hand opening a challenge for lefties. And, though it’s technically stainless, the titanium handles do pick up smudges and snail trails. Neither of these is terribly troubling to me, though. I’m more than pleased with the Chef’s ergonomics, both in the hand and in the pocket.

Deployment and Lockup

As evolutionary as the rest of the Chef may be, the knife’s deployment and lockup are as basic as bacon and eggs. Not to say that chicken ovum and cured pork aren’t delicious (they are), but there’s a skill to handling even the most humble of ingredients. The combination of Spydie-hole and bronze washers is classic – Never flashy, but accessible and delicious. It’s a no-fuss, low maintenance setup for those who use their knives rather than playing with them.

If there’s one complaint I have with the Chef, it’s the closing action. Have you ever worked in a restaurant? The closing shift almost invariably sucks. Same goes for the Spydiechef. You have to nudge the blade up and over its detent, which requires applying force to the blade while your thumb is still in the slicing path. Exert too much pressure, and it could theoretically pop down and filet your knuckle. Now, I haven’t had this happen. The detent is soft enough that a gentle push will pop it over the ceramic ball. But, it’s definitely something that requires some fine motor skills.

Spyderco Spydiechef Review – Final Thoughts

This is a knife that’s put my collection in crisis. Between the Spydiechef, the FRN Chaparral, and the Kershaw Atmos, the other folders in my case aren’t getting much pocket time. The Native 5 has subbed in for a day or two, but the Kizer Begleiter, Steel Will Cutjack, and even my ZT0562 have been unable to crack the rotation.

This knife is so damned good that it’s dampened my enthusiasm for other knives. And honestly, I think I’m okay with that. This is a tool I feel good carrying, using and, in the near future, owning. It’s the Chaparral all over again – Nick Shabazz loans me a knife, and I wind up buying one. Thanks again, Nick, and a hearty “Well done” to Marcin Slysz and Spyderco.

Spyderco Spydiechef Premium Chef Knife with 3.32" LC200N Ultra-Corrosion-Resistant Steel Blade and Titanium Handle - PlainEdge - C211TIP

One of a Kind: The Spydiechef is an extremely refined folding knife that takes the user-friendly Ergonomics and balance of a world-class chef.
Ultra Corrosion Resistant: It features a gracefully curved blade crafted from LC200N. This state-of-the-art nitrogen-based alloy is extremely corrosion resistant and is actually used by NASA for the ball bearings used in aerospace applications.
Reliable High Performance: It offers an extreme cutting performance in a package that is immune to even the harshest environments.
Versatile: For additional security when working around water, the handle also includes a lined Lanyard hole for easy attachment of safety lines and Lanyards.
Ergonomic: To reduce weight, optimize balance, and simplify cleaning, the Spydiechef features an open-backed handle constructed with two precision-machined solid titanium scales.

Editor: I recommend purchasing the Spyderco Spydiechef at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Slysz Bowie Review

by Dan Jackson 19 Comments

Last Updated: August 1, 2019
An often enjoyed pastime of production knife collectors is to discuss various “Sebenza Killers” arriving on the market. The Sebenza has long been considered a gold standard in high end production cutlery, and the thought that a competitor might knock the Sebenza off it’s podium has been a topic of conversation for some time. The Bradley Alias might be the most notable knife to get bandied about as a “Sebenza Killer,” and there have been several others over the years. But 25+ years later the Sebenza is still going strong, and there seems no end in sight to its reign.

Buy the Spyderco Slysz Bowie at BladeHQ

Buy on Amazon

Ironically, the rise of titanium framelock flippers (something Chris Reeve Knives doesn’t have an answer for) has collectors moving on to other topics, and the thought of a “Sebenza killer” suddenly seems less relevant than it once did.

Still, it’s interesting to think of knives that may stack up to the Sebenza, and as I admired my Slysz Bowie I couldn’t help but draw several comparisons to the Sebbie. Designed by Polish knifemaker Marcin Slysz, the Bowie is his second collaboration with Spyderco, with the Techno being his first.

The Techno met the market with great reviews, and remains a highly regarded production piece. The Bowie is a bigger offering. While quirky like the Techno, the Bowie has its own more business-like character. The knife is expensive, but begged for further examination. I’m pleased to offer some thoughts on the Slysz Bowie after an extended period of carry and use.

General Dimensions and Blade Details

The Slysz Bowie has an overall length of 7.79″, a 3.42 blade, and weighs 4.3 ounces. The knife is manufactured in Taiwan. Depending on your preferences this could make a good every day carry piece. This is what I consider to be a medium sized knife, and it sits between the large and small Sebenza. Of course if you are looking for something smaller the Techno, also designed by Polish knifemaker Marcin Slysz, could be more your bag. I have never stressed out over blade to handle ratios, but I can’t help but feel like there is a lot of excess handle on this knife, and there is something a little funky about the proportions of the Slysz bowie.

As it’s name suggests, the Slysz Bowie features a clip point blade. This is more of a non-traditional bowie with an elongated clip, and rounded spine. The rounded spine is a lovely detail, and is one I don’t recall seeing on a Spyderco before. The blade has a full flat grind and it is very thin and slicey. The finish is a stonewash that was first taken to a high polish. The blade is still highly reflective and mirrors whatever you hold it up against. I liken it to the finish on my Fantoni CUT Flipper. Clip points have always been a very practical blade shape, and this version provides a good balance of tip strength and fine piercing ability. The cutting performance is also very good.

Spyderco went with CTS-XHP, the same steel on the original Techno. I have had a good deal of experience with CTS-XHP using the Domino. Having been a fan of that steel on the Domino I immediately put the Slysz Bowie to work. This knife is a hoss, and easy handled cardboard boxes, a rope cut test, and some woodwork in addition to regular EDC chores. CTS-XHP holds a nice edge but I especially appreciate this steel’s ease of sharpening. I have yet to have any problems with rust or corrosion with CTS-XHP and so far the Slysz Bowie has been no different.

Handle, Ergonomics, and Pocket Clip

The handle of the Slysz Bowie is comprised of 2 contoured titanium handle slabs. The gentle radius of the handles is a nice touch, and it seems like that is how they were able to keep the edges crisp without the knife feeling too blocky in hand. Construction is top notch with matte gray hardware (including an oversize pivot) and a substantial black G10 backspacer. I know that the bright blue backspacer of the Techno was a favorite feature of many. Personally I prefer the more subdued appearance of the black backspacer. The backspacer is jimped in 2 places and protrudes ever so slightly from the handle scales. The light chamferring to the corners of the backspacer give it dimension and detail that belies its plain black appearance.

The titanium handle slabs have been given a heavy stonewashing. The stonewash supplies the slightest amount of texture to the handles. It also makes the Slysz Bowie very easy for me to cram into my pocket without agonizing over it inviting scratches like a freshly waxed Porsche parked too close to a grocery store. Compared with the Rubicon (another recent Spyderco release) the Slysz Bowie practically begs for use.

The Slysz Bowie feels pretty good in hand. There is a run of Sebenza like jimping along the spine, as well as the backspacer, and the good size handle accommodates my larger hand well. Although no efforts have been made to round the edges of the handles, the contoured titanium makes up for it slightly. The knife is fine for normal use, but I would reach for a fixed blade if I had an extended heavy duty cutting chore. The Slysz Bowie feels capable in forward and reverse grips and handles like a well-balanced medium sized folder should.

The Slysz Bowie takes advantage of Spyderco’s wire clip. It should be no surprise to regular readers that this is one of my favorite clip designs. It’s very discrete and the Slysz Bowie all but disappears into the pocket. The handle is tapped for ambidextrous tip up carry. The knife carries very well being relatively slim and relatively lightweight considering that it’s a decent sized full titanium framelock folder. I will say that I did have issues a couple times with my pants pockets binding up on the lock spring cut out on the handle when I tried to draw the knife.

Deployment and Lockup

Being a Spyderco, this knife gets opened with its thumb hole. This is a generously sized thumb hole that is easy to access with your right hand and opens smoothly and quickly with a satisfying “thwack”. The phosphor bronze washers are very smooth and the detent is tuned to where you can easily flick the knife open but you don’t need to worry about the blade falling out of the handle.

Unfortunately, us lefties are left out in the cold. Just like with the Techno, this knife is difficult to open with your left hand. It’s not impossible, but you can’t enjoy flicking the knife open like you can with your right hand. That’s a shame because part of the appeal of Spyderco is their (usually) ambidextrous designs. I’ll stop whining as I understand that 90% of the people reading this are right handed, but I gotta “keep it real” for my fellow lefties.

For lock up we have a classic titanium frame lock, or a Reeve Integral Lock (RIL) as Spyderco likes to call it. This lock does not benefit from a steel insert like some of Spyderco’s other framelocks, and my knife locks up pretty late (around 75%). That said, its a very sturdy lockup and there is no blade play in any direction. There isn’t any blade stick either. Blade centering on my example is absolutely perfect.

Spyderco Slysz Bowie Review – Final Thoughts

The Slysz Bowie is a hell of a knife, and I imagine if Spyderco released it either a few years ago or for $100 less, it would have made huge waves in the production knife scene. As it stands, it’s a beautiful knife and a solid performer. I pictured it next to my American Lawman for a reason – the Slysz is meant to be used. But I think that the $320+ price tag will scare many folks off. And the absence of a flipper, bearings, steel lock insert, and big name American designer doesn’t give it that “gee whiz” factor that seems to drive a lot of consumer attention these days.

I have justified expensive knives in the past. They are luxury goods. People buy them because they want them. Still, I think a discussion on price is appropriate here. Personally, I bought mine used for $230, and at that price I was willing to check it out. For $300 it was just too rich for my blood. While I could somehow justify paying full retail for the Rubicon, I could not do that with the Slysz.

Here is a shot of the Slysz Bowie next to another hard working knife, the Cold Steel American Lawman:

I am more than a little surprised about the price of this knife, especially since the Farid Mehr K2 is a bigger titanium frame lock, has an equally exotic steel, is also made in Taiwan, and has a MSRP of a full $100 less than the Slysz Bowie. I’ve since learned that the reason for the price difference is largely due to the 3-D machined handles of on the Slysz Bowie and the polished and stonewashed blade. Whether these features are worth the $100 difference is up to you.

The Slysz Bowie is still pretty far off from what a Sebenza costs (currently $410 for a Large 21), so if Spyderco truly had a “Sebenza Killer” in mind, at least it’s almost $100 less. In many ways I like the Slysz Bowie more than a Sebenza. I prefer the full flat grind, superior blade steel, 3-D machined stonewashed handles, thumb hole, and better action. When you consider the value proposition, maybe the Slysz Bowie is priced appropriately after all.

If you can swallow the price tag, or can snag a good deal on it, this is an awesome knife. I am not ready to declare the demise of the Sebenza, but this is still a damn good knife.

Spyderco C186TIP SLYSZ Bowie Folding Knife, Titanium, 3.42-Inch

Plain sharp edge
7.79 inches overall length
4.37 inches closed length
3.42 inch blade length
Titanium handle

I recommend purchasing the Slysz Bowie at Amazon or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated – thank you very much!

Spyderco Techno Review

by Dan Jackson 17 Comments

Last Updated: August 4, 2019
The Spyderco Techno is a small titanium framelock folder with all the fixings. It is designed by Polish maker Marcin Slysz, who doesn’t seem to have much in the way of background information on the internet. According to Spyderco, Marcin is an extremely talented knifemaker of international repute.

Buy the Spyderco Techno at BladeHQ

Buy on Amazon

I must admit, the knife designer’s pedigree isn’t what drew me to this one. Rather, I was taken in by the Techno’s charming design. Featuring bold lines and plenty of personality, this one really struck a chord with me. The fact that this knife also includes CTS-XHP supersteel and 6AL-4V titanium handles further piqued my interest. And when I learned it would be produced at Spyderco’s now legendary Taichung Taiwan facility, well, that sealed the deal.

General Dimensions and Blade Details

With an overall length of 6″, a 2.55″ blade, and a weight of 3.6 ounces the Techno falls firmly into what Spyderco likes to call “little big knife” territory. This a nice little nugget of a knife. It’s a great size for EDC and would also do well in anyone’s collection of titanium framelock folders.

The drop point blade has been fully flat ground from a very thick (4.5mm) piece of steel. Out of the box I wasn’t super impressed with how this knife cut paper, but I quickly gained respect for the Techno after attacking some super tough 5/8″ manilla rope, and carving up a pressure treated piece of pine. While the thick blade is not the most amazing slicer, the knife is ground relatively thin so you still have a capable cutter on your hands. The thick stock carries out all the way to the tip, leaving you with a stout blade able to handle a large variety of tasks.

Spyderco selected CTS-XHP steel, which has previously never been used on a production level Spyderco knife. This is also my first experience with CTS-XHP, and I was eager to try it out.

So far my experience with CTS-XHP has been extremely favorable. It’s a powdered stainless steel with an ultra fine grain structure. When I sharpened the knife I didn’t have any issues and it has held a hair shaving edge through a number of nasty cutting chores including the aforementioned rope and wood tests, a good deal of cardboard, and a number of little EDC tasks that I encountered in my several weeks of carry time. The edge holding was extremely impressive, I had no issues with chips or rolling, and saw no signs of rust or staining either. I would definitely place CTS-XHP above something like S30V, and I look forward to spending more time familiarizing myself with this steel.

Handle, Ergonomics, and Pocket Clip

The handle slabs are full titanium, and they have been given a tumbled finished for an attractive and easy wearing look. The handles have a smooth feeling to them (contrast it with a blasted finish on something like the small Sebenza), but it feels really high quality, and there actually is a decent amount of grip. There is a partial backspacer made of blue G10. I know some guys will really like the blue G10. Personally, I would have preferred to see titanium or carbon fiber instead. This is one of those “your mileage may vary” situations, so feel free to disagree. Overall, handle construction is rock solid. Everything screws together and all the edges have been nicely chamfered and meticulously finished. It’s really very impressive, and difficult to describe in a single paragraph.

The ergonomics on this knife are surprisingly good. It’s a small blade so naturally I wasn’t sure how it would fit my larger hand, but I can get a comfortable 4 finger grip here without issue. There is a run of coarse jimping on the spine that looks good and provides a little traction for your thumb. The back of the blade is also wide enough to accommodate your thumb, giving you plenty of room if you desire it. There is more jimping on the backspacer. Again, it is more for decoration than anything, but it does offer some traction. There are definitely more comfortable knives on the market (consider the Sage 2 if you want to keep it reasonably small and also in the Spyderco titanium framelock family), but all in all I am very pleased with how this knife feels in hand.

The pocket clip is the excellent Spyderco wire clip. This is a proven clip design that I personally have had a lot of experience with. This one has been sandblasted for a unique finish that will wear well, and it is positioned for ambidextrous tip up carry. I happen to be a big fan of the wire clip, and think Spyderco did an excellent job integrating it with the Techno. The knife rides very deep, and makes for an extremely discrete carry. At 3.6 ounces I did tend to notice this one in my pocket but, it’s not going to weigh you down.

Deployment and Lockup

Since this is a Spyderco, deployment is made possible by a thumb hole – this time of the 13mm variety. It is well placed for right hand access, and is easy enough to get at with your thumb. Unfortunately, lefties will have a slightly different story. The thumb hole is partially blocked by the titanium lock bar, and it is difficult to access with the left thumb. I can pinch out the blade with my thumb and middle finger, but don’t expect to open this like a normal Spyderco. I can also sort of flick the knife open with my index or middle finger, but really it is a design with right handed people in mind. I still like the knife despite these issues, but it’s definitely something to consider if you are a lefty eying this design.

The detent is firm, but the blade gives way to very smooth action aided by the phosphor bronze washers. Initially the knife was a little stiff, but that is because the tolerances are so tight. Mine almost immediately started to break in, and within a week or so of use it is became very smooth.

For lockup we have a titanium frame lock. Spyderco pays homage to the lock’s designer Chris Reeve, and refers to it as a Reeve Integral Lock (RIL) in the Techno’s documentation. This is a nice touch in an era of intellectual property shenanigans.

Practically speaking, I am extremely impressed with how this knife locks up. I hate to use hokey catch phrases like “this knife locks up like a bank vault,” but this knife locks up like a bank vault. It’s really impressive to slowly move the blade and hear the chunky framelock fall into place. My lock engages early (around 25%), hasn’t budged a millimeter (even after hard use and repeated flicking of the blade open), and there is zero blade play to speak of. Much like the finish of the titanium handles, you just have to feel this one for yourself to truly appreciate how nice it really is. It blows the Sage 2 out of the water, and gives the Chris Reeve Knives I’ve owned a good run for their money.

Spyderco Techno Review – Final Thoughts

Spyderco has another winner on their hands here. From a fit and finish perspective this knife is immaculate. If you have owned any of Spyderco’s other Taiwanese knives you will begin to understand where I am coming from, but even for their Taiwanese factory this knife is impressive. No doubt fans of Spyderco and titanium framelocks will find a lot to like with this little knife. It’s just really well done.

Now that I am done gushing over the knife I do have some caveats for you. First of all, it is expensive and small. I don’t necessarily have a problem with either of those things, but I’m not going to say this knife is for everyone either. From a cutting perspective the geometry is a little chunky. Spyderco did thin the blade out, but the relatively narrow profile and thick stock has its limitations. Also, the ergonomics are good, but not outstanding. So the Techno is far from a perfect knife – at least on paper. However, if you are willing to overlook that sort of thing, and approach the knife from a wider perspective, then I think you will be very pleased with the Techno. It’s one of the most solid folding knives I’ve had the pleasure of reviewing, and the feeling of quality I get from this knife is difficult to describe.

I also have to “keep it real” for my fellow lefties. This really isn’t a knife designed for us. I’ve managed to overcome the opening adversity, but unless you really like the design I don’t think it is worth the struggle.

All in all I’m really impressed with the Techno. If you like smaller knives and have the money, check it out. It’s a very cool little knife.

Spyderco Techno Titanium Plain Edge Knife

Collaboration with knifemaker Marcin Slysz
Fully flat ground CTS-XHP blade
Titanium handle with blue spacers
Chris Reeve Integral Lock (RIL) with a deep pocket wire clip
Closed Length (Inches): 3.43, Overall Length (Inches): 5.98, Blade Length (Inches):2.55, Blade Steel: CTS XHP, Grind: Full-Flat

I recommend purchasing the Spyderco Techno at Amazon or BladeHQ. Thanks for checking out the review.