framelock

Kizer Alter Ego Review

Last Updated: September 7, 2019
Kizer’s 2017 catalog wasn’t released to the same fanfare as Spyderco’s or KAI’s. That may be partially due to the fact that it’s massive. Most of their old designs are still on there, so don’t worry, there’s no need for panic purchases a la Spyderco’s discontinued list. At the same time, Kizer has collaborated with a host of new makers so up and coming your plaid-bedecked neighbor who won’t shut up about vinyl records hasn’t even heard of them.

Buy the Kizer Alter Ego at BladeHQ

Buy on Amazon

In the interests of full disclosure, you should know that this review sample was provided by Kizer. While that won’t have an impact on my impartiality, there is the risk that the product I was sent was double or triple checked for quality, and that my sample is the best of the brood. That risk is counterweighted by Kizer’s deserved reputation for high manufacturing tolerances. In other words, I don’t think you need to worry about it.

The Kizer Alter Ego falls into their “Bladesmith” line, which is seemingly reserved for collaborations with custom makers. I was surprised to learn this, as the Alter Ego seems aesthetically similar to many of Kizer’s in-house designs. Searching for “Kim Ning” and “Kim Ning Knives” yielded no results outside of Kizer products. It may be that he is better known internationally, or that he doesn’t have an English website, but I suspect that (much like Jim McNair of KAI) he’s a full time designer for Kizer.

General Dimensions and Blade Details

The Kizer Alter Ego has a 3.55” blade housed in a 4.625” handle. Overall, it’s 8.125” long and weighs 4.91 oz, with a blade thickness of .1375”. For some this isn’t terribly large, but it’s definitely more knife than I’m accustomed to. To their credit Kizer kept the weight pretty low. As a point of comparison, it weighs only .6 ounces more than the Zero Tolerance 0900, but has a .85” longer blade. Those numbers might not look impressive on paper, but trust me when I say that the difference is significant in person.

The blade itself is made of S35VN, a powder metallurgy steel developed by Crucible as the successor to S30V. Prior to the revolution of high-end Chinese manufacturers, a steel like this would have been unheard of on a Chinese knife. Times have changed, and now it’s sound business sense for companies like Kizer to import high performance steels. S35VN is a particular favorite of mine. It retains S30V’s wear and rust resistance, but doesn’t chip as frequently. I’ve used the Alter Ego frequently (if not rigorously) over the past month, and the experience matched my expectations.

As nice as the S35VN is, I wish it had been paired with a plainer utilitarian blade. The Alter Ego sports a drop point blade with a profile that echoes the Viper Dan 2 or the ZT0770 (both blade shapes that I love), but which is drawn up into a recurve closer to the base of the blade. While by no means a dramatic recurve, it exaggerates the belly enough to make certain tasks – press cutting in food preparation, for example – less predictable than a continuous curve or a straight edge. If I found myself cutting rope on a regular basis the recurve would have more appeal, but my needs are fairly pedestrian.

Handle, Ergonomics, and Carry

Much like the blade, the handle is comprised of organic, muscular lines. In some respects it’s comparable to the Hinderer design aesthetic, but where Hinderer relies on hard angles and a very industrial appearance, Kizer turns to curves that are almost anatomical. In keeping with this, ornamentation is kept to a minimum. I’m not normally a fan of decorative pivots, but Kizer’s rendition is eye-catching, subtle, and most importantly is torx compatible.

The ergonomics on the Alter Ego are good, if narrow in application. It’s difficult to tell from the photos and product literature, but the handle coerces your fingers into something akin to a pistol grip. That’s not necessarily a downside, especially if you’re in the market for a tactical folder. This knife won’t leave your hand unless you want it to. However, it’s less than ideal for everyday tasks, such as preparing a picnic lunch or opening a clamshell package.

While the design is ergonomically sound, if not to my taste, there is one flaw in the execution: the pocket clip. It’s not offensively bad (like this little guy), but it does generate enough of a hot spot to cause some discomfort. Gloves and careful finger placement mitigate this problem. The clip aside, Kizer put a lot of work into making this knife comfortable. All the edges are buffed and all the corners are softened. Kizer clearly knows how to make a knife comfortable.

The Alter Ego is pretty quiet in the pocket. No one could call it svelte – it is fairly wide, and nearly an inch of the handle sticks out past the edge of the pocket – but for a knife this size, it’s better than I expected. The aforementioned contouring keeps it from feeling like a brick in your pants, and though the clip detracts from the blade’s ergonomics, it also ensures that an errant seat belt can’t make off with your rather expensive pocketknife.

Deployment and Lock-Up

As with most of Kizer knives, the Alter Ego’s blade is deployed via flipper tab. Sadly, Kizer committed something of a cardinal sin in the design stages of the Alter Ego: they put aggressive jimping right under the flipper tab. For the first two or three days I carried it, my index finger would slam right into the aforementioned jimping every time I flipped it open, leaving my finger raw and smarting. Eventually my technique improved and the problem went away, but it was a literal pain to deal with. It’s a shame that such a flaw wasn’t caught earlier, because otherwise deployment on the Alter Ego is perfect. The detent is crisp and firm, and there’s not a hint of grit in the bearing pivot. It’s not as snappy as the action on my ZT0900 – there’s more of a hydraulic feel to it – but that’s a matter of taste, not quality. Deployment on both knives is as smooth as glass.

Commensurate with Kizer’s reputation, the frame lock on the Alter Ego is perfectly executed. There is zero wiggle in the lock while deployed, and because of the steel insert there’s no break in period or risk of the lock face galling inappropriately over time. Since arrival, the lock has consistently engaged the blade tang at about 50%, though it should be noted that 100% of the steel insert engages the tang. Said insert also functions as an overtravel stop. To round things out, Kizer also milled a slight cut out in the handle to make the lock more accessible.

Kizer Alter Ego Review – Final Thoughts

At a price point that hovers between 160USD and 180USD, the Alter Ego is competing with the premier lines of most brands; within the genre – titanium framelock flippers – it’s directly competing with most of Zero Tolerance’s catalog. While I’m not going to wade into the waters of which brand I prefer (the gaming industry has console wars covered), I can say that the Alter Ego is as well made as any normal run ZT. That’s pretty high praise, all things considered.

End of the day, this knife isn’t for me. It’s too big for my purposes and definitely has a different end user in mind. That said, everything else about the knife – the manufacturing tolerances, materials, attention to detail – is fantastic, and clues me into just how much I’ve been missing out on by not trying a Kizer sooner. If the design of this knife appeals to you, I’d wholeheartedly recommend it. If the quality of the Alter Ego is representative of their entire catalog (and the community’s response indicates that such is true) then I wouldn’t hesitate to buy any Kizer knife if the design appealed to me.

Kizer Cutlery 4492 Alter Ego Framelock 4 5/8" closed

I recommend purchasing the Kizer Alter Ego at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

CRKT Squid Review

by Grayson Parker 19 Comments

I’ve listened to Gear Geeks Live practically since its inception. My commute is around 4 hours round trip, so that’s a lot of time spent in cars trying not to look at my smartphone, and podcasts help with that. One particular episode is always easy to recall, and that’s the episode where Thomas W. (of KAI USA) drops in for an interview/argument. While most of that episode was spent arguing over whether the Cryo 1.0 is a good knife, one of the tidbits teased was that Kershaw was going to dive into the sub-$20 waters with a new product line.

Buy the CRKT Squid at BladeHQ

Buy on Amazon

It sucked.

One could argue that this line was doomed to failure because of its dedicated use of 4Cr14, that they looked like the gas station knives Nick Shabazz has so much fun with, or because they all weighed more than a brick shithouse with a full septic tank, but I think the real reason they flopped was different. That reason, you ask? Simple. There’s already an apex predator in these waters, and that’s CRKT.

Before anyone cries Gerber, they don’t count. I’d sooner go near a blender in a Gremlins remake. No, the real top dog in the world of truly budget blades is Columbia River Knife and Tool. They’ve had their problems, sure, but on the whole their budget knives have been quietly successful among enthusiasts and big box shoppers alike. The CRKT M16 is the gateway drug for many a poor knife nut’s wallet.

Enter the CRKT Squid. Designed by Lucas Burnley, the Squid is based off the custom offering of the same name. Burnley is better known for the now ubiquitous Boker Kwaiken, but the Squid has a surprising following. Not only is there enough interest to warrant several special editions, but there’s enough demand that a small market for custom scales has popped up. How could a $15 knife be compelling enough to warrant this attention?

General Dimensions and Blade Details

This knife is portly. It’s an all steel 3.5 oz sandwich, and there is no getting around that. The 2.25” blade is housed in a 3.5” long handle. I won’t sit here and try to convince you that the weight is a practical issue: it isn’t. The balance isn’t great, but other than that, the Squid’s weight won’t come up in use. I’m still not a fan. There’s an argument to be made that more weight is a selling point for big box consumers, as they equate weight and quality. I won’t denigrate people who feel that way, but I know better than them and they’re wrong I respectfully disagree.

Overall the Squid is well made, especially considering the price point. Centering is good, the grinds are even and clean, and there aren’t any stray machining marks. The one complaint I can register is the aluminum backspacer. First of all – and I know this is subjective – it’s ugly. The off-silver/greyish color doesn’t look right alongside the stonewashed steel scales. Just anodize it. Black, green, blue, whatever. It’d fit the ‘cute’ aesthetic the Squid already has. Second, the backspacer is ground unevenly. It’s not a practical concern, but I’ve whined about lesser sins.

This knife cost me just north of $15.00. It has 8Cr13MoV. What else did you expect? It’s a budget steel, but a fine one, all things considered. I haven’t experienced any rust, and the microchipping I did run into vanished after a few passes on the Sharpmaker. Regular stropping is recommended. It’s listed as a hollow grind, and the stock isn’t very thick; only .11”. Unfortunately it’s not a particularly thin hollow grind, nor is it very high, which makes it somewhat thick behind the edge. For cardboard, paper, or packages, you’d never notice an issue. I did during food prep, but how often will you use a 2” knife in the kitchen? I’m guessing somewhere between ‘never’ and ‘when it’s the only knife that can cut.’ Is it a big deal? No, but it caught me off guard.

Handle, Ergonomics, and Carry

Normally, I open up this section with a bit on the visual appeal of the handle. I try to answer questions like: is it attractive?, was it difficult to produce?, etc. For whatever reason, I can’t do that with the Squid. I’m not saying that the Squid is unattractive, but I think I’d be blowing smoke up the readerships’ collective asses if I tried to praise it effusively. The stonewash is nice, I suppose; but nothing that gets me out of my seat.

The ergonomics are okay. I haven’t noticed any hotspots, but the stainless steel handles are pretty slick. It’s a slim knife and doesn’t fill the palm very well. The custom versions appear to have thicker, contoured handles which would alleviate the aforementioned problems. Without a lanyard, the Squid is definitely a three finger knife, but on a knife this small you can’t exactly expect more.

Given its weight, I was surprised to find that the Squid was a pretty quiet companion. For the most part I carried it at work, which means thick pants and a good, sturdy belt to support those extra 3.5 oz. The clip allows for discreet carry, and everything about the Squid that makes the grip questionable makes it carry like a dream.

Deployment and Lock-up

Deployment on the Squid is a fairly simple affair. The thumb studs are well placed and not pokey enough to snag on pockets or split your finger. Sure, the detent is a bit weak for my taste, but you can slow roll or coin flip the Squid open, and that’s what counts. Teflon washers give the action a bit of a hydraulic feel. Not so nice that I develop carpal tunnel from flicking it, but on par with much more expensive offerings.

Regarding the lock, there really isn’t much to say. It’s a stainless steel framelock. I haven’t experienced any lock rock or blade play, and due to the absence of titanium there’s certainly no lock stick. However, I’ve experienced all three of those issues on framelocks that cost ten times what the Squid does, so maybe this is more of a feat than I’m giving CRKT credit for.

CRKT Squid Review – Final Thoughts

Ultimately, I don’t think I’ve bought into the Squid’s popularity. Don’t get me wrong, I understand why it’s as popular as it is. The Squid hits most of the ‘hype’ buttons the Cryo did at a lower price point, has (in my experience) better F&F, and in my opinion features a more attractive design. That said, it’s quite heavy for its size, the ergonomics are wanting, and it’s called a squid when that is clearly the body of a cuttlefish.

Furthermore, reviewing this knife has given me some perspective on the cottage industry surrounding the Squid. Most of my quibbles could be solved by a replacement scale: the weight would be cut by a third, the slick handle could be replaced by a more tactile material, and while I’m at it I could get that backspacer replaced. Will I order one? It isn’t likely, but hand me enough bottles of porter and you never know what might happen.

How does the Squid stack up to the competition? Well, that’s tough to answer. I’ll stand by my claim that CRKT is the boss hog of budget blades, but once you get up into the middle tier value knives it’s a different situation. As much as I put down Kershaw’s sub-$20 products, anything they produce around the $50 mark is pure gold. If you can save up it’s probably worth your time to do so.

Still, it can’t be overstated that $15 is a far cry from $50. For the money it’s tough to beat out the Squid. The design is friendly enough that your co-workers won’t be wigged out, useful enough that you’ll always be glad to have it on you, and cheap enough that you won’t regret buying it if you do purchase more expensive knives down the line. If that sounds appealing, give the Squid a shot. I’m glad I did.

CRKT Squid Everyday Carry EDC Pocket Folding Knife with Frame Lock: Stainless Steel Plain Edge Blade, Stainless Steel Handle, Pocket Clip, 2490KS

Easy to Sharpen: High carbon stainless steel blade takes an edge well
Enhanced Protection: Black stonewash is durable and ages well
Maximum Control: On blade friction grooves for grip
Low Profile: Pocket clip provides secure carry
Designed by Lucas Burnley in Bend, Oregon

I recommend purchasing the CRKT Squid at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kizer Ki3480 Dirk Pinkerton Rogue Review

by Dan Jackson 10 Comments

The Kizer Ki3480 Rogue is a series of firsts for me. It’s the first Dirk Pinkerton design I have ever reviewed, it’s my first review of a mid-tier Kizer knife, and it’s the first wharncliffe I have reviewed in a while.

The designer, Dirk Pinkerton, is an interesting guy. He is a custom knifemaker from Huntersville, North Carolina, and his focus is on purpose built knives for self defense applications. He even did a collaboration with our very own Chad McBroom, the Active Response Kerambit.

Buy the Kizer Rogue at BladeHQ

Buy on Amazon

Using knives defensively is well outside my wheelhouse, but I have been curious about Dirk Pinkerton’s designs ever since reading RoadKill’s review of the Meyerco Wharning back in 2012.

The Rogue shares some obvious design similarities to the Wharning. Namely, the aggressive wharncliffe blade. It’s different from what I typically review, and different from Kizer’s other designs, which is exactly why I wanted to check it out.

General Dimensions and Blade Details

The Rogue has an overall length of 7.125″, a 3.00″ blade, and it weighs 3.92 ounces. Like all Kizer knives, the Rogue is made in China. I like that although the Rogue was likely designed with self-defense in mind, this is still a practical size for Every Day Carry (EDC). In fact, it almost resembles a folding box cutter. An obvious comparison would be with the Spyderco Yojimbo 2, a knife designed by Michael Janich. In addition to being a designer for Spyderco, Michael Janich is a martial artist and fellow enthusiast of the wharncliffe.

The dramatic wharncliffe blade is what makes this model stand out. You are going to either love it or hate it, and it is different from anything else in my collection. The 4mm thick blade has been given a partial flat grind. There is no swedge but the blade still comes to a needle-fine tip. The blade has been given a fine tumbled finish.

The benefit to a wharncliffe blade is that it excellent for slicing cuts. Power is applied uniformly to the edge whether you are at the tip, or by the ricasso. Combine that with an excellent tip for thrusting, and you have a very capable blade shape. For these reasons it is easy to see why guys like Michael Janich and Dirk Pinkerton prefer the wharncliffe.

The flip side is that there is no belly, which makes tasks like skinning near impossible. This is not my favorite knife to use in the kitchen.

Kizer chose S35VN for the blade steel. S35VN is excellent stuff. The more I use S30V, the more I like my S35VN blades. They are easier to sharpen and less brittle, but still hold a good edge like S30V. S35VN is an American steel, and Kizer had to import it in to China to make their knives. We often think of products being exported from China, so it’s an interesting point to consider, and speaks to Kizer’s dedication to making high end production knives.

Handle, Ergonomics, and Pocket Clip

The Rogue has full titanium handles. Unlike the Intrepid, the handles of the Rogue are not 3-D contoured. Instead, they have been milled with a series of reliefs to provide texture and visual interest. The handle was then given a black coating and then the face of the handles were surface ground to provide a brushed titanium texture. The two-tone finish is unique, and so far it has held up well. Everything has been screwed together, and there are 2 barrel spacers and a decorative pivot.

Fit and finish is excellent. Everything has been completed to an eerie level of precision, much like a Taichung, Taiwan Spyderco.

The ergonomics of the Rogue benefit greatly from a simple handle design, and good use of jimping. The handle shape is about as simple as they come, which means that it will feel great for most people. There is flat top jimping on the spine of the blade. This offers good traction without being overly destructive. There is some additional light jimping / millwork on the spine of the handle, and also where your pinky and ring finger rest. These features, combined with the millwork on the handle slabs, offer a good deal of traction for the end user. The end result is a knife that feels secure in the hand without being obnoxious.

The blue titanium pocket clip offers a splash of color while being a good pocket clip. It’s a fold over deep carry clip, that has been placed so that about a quarter of an inch of the knife is left exposed. This was probably done to provide easy access in the event you needed the knife in an emergency situation. Personally, I’d prefer an even deeper carry, but the knife is still discrete.

The Rogue carries well. It’s not an overly thick or heavy knife, and the titanium clip offers plenty of retention. The knife stays in your pocket until you need it, and then it’s ready to go. No complaints with how this knife carries.

Deployment and Lockup

The Rogue is a dual thumbstud knife. I have always liked thumb studs, and the ones on the Rogue are nicely done. They are prominent and easy to access. The blade rides on phosphor bronze washers; my washer material of choice. Here the action is smooth and easy. There is a fairly strong detent, and the blade flicks open with a push of the thumb.

For lockup we have a titanium framelock with a stainless steel lockbar insert. The knife locks up early, and is secure. There is no blade play in any direction. There is also no lock stick. This is an excellent fame lock and rivals the Zero Tolerance framelocks I have owned over the years. Top shelf stuff.

Blade centering is good, but not perfect. That is about the only fit and finish nitpick I could find.

Kizer Rogue Review – Final Thoughts

The Rogue is solidly designed and perfectly executed. I have a hard time finding fault with this knife. Maybe I would move the pocket clip up a quarter of an inch, and the blade over a millimeter. Beyond that I don’t have much to say. Some may not care for the aggressive wharncliffe blade shape, or the 2 tone handle, but that is more personal preference than anything. If you are a fan of the design, then I would recommend it without reservation.

What you get for the money is also worth mentioning. As of the date of publication of this review, the Rogue can be had for just under $120. At that price you are getting a full titanium handle, a S35VN blade, a thoughtful design, and a near perfectly executed knife. The fit and finish is excellent, and the frame lock is among the best I have handled. I can’t think of much that touches it at this price point.

The Yojimbo 2 can be had at that price, but you won’t get S35VN or a titanium frame lock. That is an interesting comparison. I am sure some will prefer the thumb hole and compression lock, and find those to be worthy trade offs, but if Spyderco were to make the Yojimbo 2 as a titanium framelock, it would easily be a $200 knife.

The Rogue is another solid offering from Kizer. Between the high end Intrepid, and the value oriented Vanguard Gemini, the Rogue shows that Kizer can also play in the middle market. This is a company to continue watching. Their strategy of offering both high quality and high value is tough to ignore.

Kizer Cutlery 3480 Rogue Framelock

I recommend purchasing the Kizer Rogue at Amazon and BladeHQ. Thanks for reading.

Zero Tolerance 0900 Review

by Grayson Parker 13 Comments

Last Updated: May 20, 2019
Alright, peer pressure, you win. You finally got to me. After holding out for god knows how long, I finally jumped on the titanium-flipper-framelock (henceforth TFF) bandwagon. Not just any TFF, mind: if I’m challenging my own tastes, I’m going all the way. Full bore. Thus, I decided to pick up a Zero Tolerance; my first ZT, excepting my brief flirtation with one of their pens. The only concession I granted to my own predilections was blade length, and that’s in part due to workplace regulations.

Buy the Zero Tolerance 0900 at BladeHQ

Buy on Amazon

The Zero Tolerance 0900 is a design by Les George that’s based on his “Mini Harpy”, but which also bears a ton of similarity to his ESR series. Les’s design aesthetic is tough to pin down, but his fascination with drop points and simple lines gives me the warm fuzzies inside. Honestly, I’m glad ZT picked a relatively conservative designer for their first sub-3” knife. No tanto point, no funky recurve. Just a solid design.

One of the reasons I steered clear of TFF’s was that I (persnickety a-hole that I am) could always find something to complain about. Whether my excuse was the lack of a lock-bar insert, the steel not being quite good enough, or the blade length being a touch too long for polite company, there was always an excuse. Not anymore. All of the reasons that otherwise would stop me from reviewing a TFF are gone, and my pretensions are crumbling around me. On that note, let’s get into the review.

General Dimensions and Blade Details

Neither Zero Tolerance nor Les George are known for dainty designs, so it should come as no surprise that their collaboration – though short in the blade – is a bit of a tank, weighing in at 4.3 oz. The 0900 has a 2.7” blade, a 3.9” handle, and an overall length of 6.6”. Most of the time I don’t feel the need to mention weight ratios, but this is a lot of weight for such a short blade. It’s shorter and heavier than the infamous Kershaw Cryo. The balance point of the 0900 is perfectly set in the first (and only) finger scallop, so the knife isn’t poorly weighted, just dense. Very dense.

Although this is my first ZT, it isn’t the first I’ve handled. A good friend of mine is firmly in the Zero Tolerance camp, and more than a few of their offerings have passed through his collection at one point or another. Handling those set my expectations pretty high. For the most part those were met; apart from one fatal flaw, that is. The secondary bevel is slightly asymmetric at the tip of the knife. I don’t know how ZT could let this leave the factory in such condition.*

*please don’t kill me KAI, that was sarcasm

I’m a bit of a stickler for thin grinds, so the chunky blade of the 0900 made me hesitate to pick one up. Fortunately, those fears were unfounded. The 0900 is a much better slicer than expected; the wide blade and high grind gets it thin enough behind the edge to do some real work. So in that sense, it outperformed my expectations. Sadly, it’s still a thick chunk of metal, and the high flat grind can only do so much to help. When compared to other knives in its class – notably the Spyderco Techno and the DPx HEAT/F – the 0900 falls closer to the Techno than the HEAT. That’s a good thing in my book.

The blade is S35VN, which is probably one of the most well-rounded steels on the market. It’s easier to sharpen than its predecessor S30V and it chips less. Mine arrived with an edge so keen I felt it on my finger before my eyes registered contact. I’ll grant that I haven’t been able to maintain that level of sharpness, but I’m not exactly a gifted sharpener. Infrequent stropping has kept it sharp enough for my needs.

Handle, Ergonomics, and Carry

Les George tends to use fairly simple lines in most of his designs. As a result, Zero Tolerance didn’t have to flex outside of their comfort range – at least, not far out of it – to produce this for a mass market. A good comparison is the ZT0220, designed by Jens Anso. Anso’s aesthetic is more avant-garde and less likely to appeal to a broad market. You can see some of his design aesthetic in the 0220, but it’s so muted that his touch isn’t immediately clear. By contrast, Les’s design aesthetic is much more conservative, and thus easier to translate. Ultimately this feels like a Les George produced by Zero Tolerance, not a Zero Tolerance designed by Les George.

In my experience, ZT knives have had good (but not great) ergonomics. I’ve occasionally been blown away: the contoured handle of the 0454 and the thumb placement on the 0392 come to mind, but those are the exceptions, not the rule. As such, I expected the 0900 to be solid in the hand, but nothing to write home about. That was a mistake on my part. This knife melts into my hand in a way that I never would have expected. It almost sings. My error lay in assuming that the contours were simply for visual appeal, and that otherwise it would feel like any other slab-handled knife. Photographs did the design no favors. The contours are deep and well chamfered, allowing your palm to wrap around the handle without feeling like you’re holding a slab of metal.

Sadly, this knife carries about as well as expected: by that I mean that you need the right pants to carry it securely. Part of the problem is the clip. What makes it great in the hand makes it a bit unreliable in the pocket: allow me to explain. The 0900 (like many modern ZT’s) uses KAI’s deep carry pocket clip. It’s unobtrusive and matches the lines of this particular knife, but has a very thin point of contact on a very wide handle. This problem is exacerbated by the placement of the clip, as around half of the point of contact hovers over the lock bar, which means it’s hovering over empty space when the knife is closed. In work pants, this hasn’t been an issue, but in dress pants, quick-drying shorts, or other thin materials, it’s lead to some anxiety.

Deployment and Lockup

This is the part where I eat a healthy dose of crow. As much as I dislike the market’s obsession with flippers, I have to admit that the 0900 is significantly more fun to fidget with than any other knife I own. The deployment is crisp, clean, and requires zero wrist flick. No weird problems with the lockbar were experienced. Keep everything well-oiled, keep grit out of the bearing race, and you’ll be perfectly satisfied. It’s worth noting that I haven’t seen any of the odd lockbar issues others experienced on the 0450.

What can I say? There’s no stick, and lock up has consistently fallen around 40%. The replaceable steel insert is a very nice touch. In addition to warding off lock stick and making potential repairs less onerous, it also functions as an overtravel stop. To date, I haven’t experienced lock rock or blade play, and I don’t expect to. Would I like a lock that keeps my hands out of the blade path? Yeah, but this is as close to perfection as a framelock can get, so I can’t bitch too much.

Zero Tolerance 0900 Review – Final Thoughts

My complaints are pretty minor: I’d like a thinner grind, a different clip, and maybe a bit of weight off the whole package, but those are wants, not needs. It’s exciting enough that Zero Tolerance took a step into the sub-3” category. I hope the 0900 – and the 0450, and the 0808, for that matter – sell well enough that ZT pays more attention to this share of the market. If the recent runs in blue and gold are any indication, that’s exactly what’s happening.

There is some stiff competition for the 0900. The “little big knife” concept has been around for awhile, and other companies have been doing a lot to refine their own offerings. Spyderco’s Techno and DPx’s HEAT/F are fairly popular and fall in the same price bracket. How does the 0900 stack up to those two? Pretty well, actually. The ~~hollow~~ full flat ~~how is this not a hollow~~ grind of the Techno beats out the flat grind of the 0900, but the George design has better ergonomics and the benefit of a steel lockbar insert. While I’m sure the HEAT/F makes for a great rescue knife, it’s far too chunky for everyday tasks, so I think the 0900 has the edge here as well.

I’ve pigheadedly prided myself on steering as clear as I can from the whole TFF market. I don’t like it when a meta (to use gamer jargon) is solved; in my view, it leads to more iteration at the expense of innovation. My problem is that the 0900 is good enough to shut down any objective complaints I have about a titanium flipper framelock. When those issues are solved, my recalcitrance rings less of legitimate criticism, and more of hipster-ism. If you like flippers already, chances are you’ll like the 0900. If you don’t, this is a great (albeit expensive) way to test the waters.

Zero Tolerance Les George Titanium KVT Folding Knife (0900); Manual Open, S35VN Stainless Steel, KVT Ball-Bearing System, Frame Lock, Reversible Pocketclip; 4.3 oz., 2.7 In. Blade, 6.6 In. Overall Length

Durable S35VN stainless steel makes the smaller, classic drop-point blade tough, chip resistant and razor sharp
Stonewashed finish gives blade and handle desirable roughened, scuffed look and helps hide scratches
Reversible, deep carry pocketclip convenient for left or right handed tip-up carry and sits low and comfortably in pocket
Ideal EDC; sleek, easy folding pocket knife essential for everyday tasks—survival tool, cutting boxes, self-defense, home protection, tactical use or the perfect gift
High quality, general all-purpose knife perfect for EDC or use while hiking, camping, fishing, hunting, working, utility or outdoor activities

Editor: I recommend purchasing the Zero Tolerance 0900 at Amazon and BladeHQ. Thanks for reading.

Kizer Intrepid Ki4468A1 Review

by Dan Jackson 7 Comments

Last Updated: August 12, 2019
The high end Chinese Renaissance has been blossoming for a couple years, and Kizer is arguably the Michelangelo of the movement. Yet there hasn’t been much coverage here of this rapidly expanding segment of the market. Ben has capably covered a couple knives from Kizer including the original Ki3404-A3 and the Vanguard version of the Gemini. I have been curious about Kizer myself, and recently acquired a Rogue and an Intrepid, the subject of this review.

Buy the Kizer Intrepid at BladeHQ

No products found.

Like the Gemini, the Intrepid is another collaboration with custom knifemaker Ray Laconico. But rather than this being a knife from the more affordable Vanguard series, we have the premium offering here replete with S35VN blade steel and sculpted titanium handles. What I find interesting about Kizer knives is their singular focus on quality. This fanaticism has gone so far that they import their materials from the United States and Japan. That doesn’t sound at all like the Chinese manufacturers of yesteryear. I think a review of a modern high end Kizer is long overdue here.

General Dimensions and Blade Details

The Intrepid has an overall length of 8.25″, a 3.625″ blade, weighs 5.64 ounces, and is made in China. This is the bigger brother to the Gemini, which has a 3.125″ blade a weight of 3.65 ounces, and a much simpler and more “socially acceptable” profile. Although the Gemini is a more practical Every Day Carry (EDC) option, I wanted to check out the Intrepid because we already have an excellent review of the Vanguard version by Ben. Tony does a great job as usual with his review of the dress version.

The Intrepid is bigger and badder than the Gemini, and it features a large modified clip point blade. I always enjoy a good clip point, and this one is no different. Actually, it’s a little different in that the blade has a harpoon, but it works much like a regular clip point. The draw to the harpoon is that it makes for a good thumb rest and funkier looking knife. I like the unique blade shape. The hollow ground blade gets thin behind the edge, and the edge itself has been evenly ground. The swedge and belly meet to form a needle sharp tip. Although they are more aggressive looking, clip point blades are well rounded performers, and this blade is great for a variety of tasks.

Kizer selected CPM-S35VN steel for the blade. S35VN is a popular choice, and I’m glad to see it here. This is an American steel made by Crucible with input by Chris Reeve, and the end result is a blade steel that is a little tougher and easier to sharpen than S30V. It also finishes nicely, and the blade of the Intrepid comes with a nice stonewashed finish.

I have carried and used my Intrepid extensively. I continue to be impressed by the ease of maintenance and edge retention on S35VN. My knife came sharp straight out of the pouch and I have used it for a variety of domestic chores including breaking down boxes, working around the house, and a little woodworking now that the weather here in Florida has finally cooled off.

Handle, Ergonomics, and Pocket Clip

S35VN blade steel is all well and good, but what really impresses me with the Intrepid is the handle. Here we have full 3-D contoured titanium handles. These handles are milled, not cast, and if you look closely you can see the cutter path You just don’t see much of this. Probably the closest competitor I have reviewed with contoured titanium handles is the Spyderco Slysz Bowie. The Slysz Bowie is immaculate, but it’s also nearly $100 more than the Intrepid.

This 3-D contoured handle comes with all the fixings you would expect in a premium titanium framelock flipper: oversized pivot, steel lockbar insert and overtravel stop, and a blue anodized titanium backspacer. Fit and finish is perfect on my knife.

Being a larger knife, the Intrepid has plenty of room for your hand and should accommodate most people with ease. The finger groove and broad spine both naturally draw in your hand. This is a comfortable piece that works well. There isn’t much in the way of a “traction plan”, but somehow the knife has managed to stay in my hand. The bead blasted titanium offers a little traction, and in my opinion the lack of jimping is a pleasure, not a curse. If you want something a little higher traction then I’d probably suggest the G10 handled version.

The pocket clip is understated when compared to the rest of the knife. This is a simple folded titanium clip, and the only adornment is the fact that it has been anodized blue to match the hardware and backspacer. That’s OK with me because the clip works. It has excellent spring retention and the knife stays firmly in place – even when clipped to lighter fabrics. This is a big knife, but it carries like a smaller blade thanks to the strong clip and slim handles.

The only potential negative is that the handle is only drilled and tapped for right side tip up carry. Not a problem for me, and I’d hate to see them drill any more holes in this handle than absolutely necessary.

Deployment and Lockup

The Intrepid is a flipper on caged ball bearings. The bearings are smooth and the blade flips with authority. For people that like metrics, I’d say it’s a strong “8” on my 1-10 flipper action scale. It flips only crisply and reliably every time. The flipper tab is large, angled, and easy to get at. There is no jimping on the flipper tab, but once again we don’t need it. Clearly the guys at Kizer have spent some time studying the American flipper market and know what we want. This thing sings.

For lockup we have a titanium frame lock. This lock has been outfitted with a stainless steel insert that doubles as a lockbar stabilizer, much like the Spyderco Domino and some of the Zero Tolerance flippers. Lockup is early without being too early, and secure without being sticky. Lockup is also rock solid. No blade play, no wiggle, and no tweaking required. I’d say the flipping action and lockup is on par with Zero Tolerance, a company known for making some of the best production flippers in the business.

Blade centering is perfect on my knife.

Kizer Intrepid Review – Final Thoughts

I was wrong to wait so long to check out these Kizer flippers. The Intrepid has everything I look for in a titanium framelock flipper and then some. Here we have a great design, premium materials, superb fit and finish, nice details, and a dialed in flipper. This is a bigger knife, but it carries like a smaller knife, and for a little over $200 you are getting a lot for your money. The 3-D machined handle is what sets the Intrepid apart. Offhand I can’t think of any production titanium framelock flippers with fully contoured titanium handles.

Here is a shot of the Intrepid next to the Hinderer MP-1:

The Intrepid is about the same size and thickness as the recently reviewed Hinderer MP-1, but it feels slimmer and more than .2 ounces lighter (the difference on paper). Granted the Hinderer is a tank and this is something of an apples to oranges comparison, but I still find it interesting to juxtapose these knives. The build quality on the Hinderer is superior, but the Intrepid is a special knife in its own right.

I recommend Intrepid if you are looking to scratch that higher end titanium frame lock flipper itch. There is a lot to like here, and again I can’t think of another flipper that has a handle like this.

I think the Vanguard version will also be a good buy if you want something at a more approachable price point. And check out the Gemini if you are wanting a more urban friendly EDC. Either way I don’t think you will be disappointed with these Kizer / Ray Laconico collabs.

No products found.

I recommend purchasing the Kizer Intrepid at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Sanrenmu 710 Review

by Benjamin Schwartz 13 Comments

Last Updated: June 18, 2019

As an OEM for various knife companies, Sanrenmu is responsible for a lot of excellent, affordable budget knives: models like the CRKT Drifter helped establish just how much we can expect from a cheap knife, setting the standards for things like the steel choice, fit and finish levels, and utility on budget folders.

Buy on Amazon

As a knifemaker on its own, however, Sanrenmu has attracted controversy. Not only does it sell its knives at very low prices (a lot of times even lower than the budget knives it makes for other companies), but there are also features and designs in their catalogue that are taken directly from other knife companies, without their consent: most famously the Benchmade Axis Lock and the knife I’m reviewing today, the Sanrenmu 710, a knife that is commonly described (and decried) as a rip-off/knock-off/copy of the Chris Reeve Knives Sebenza.

I feel like any review of the 710 has to address this issue, however briefly. The 710 echoes the Small Sebenza’s lines, but a comparison of the two knives will show that the overall designs are different: the 710 is smaller, with a different blade shape and grind. Additionally, speaking as somebody who has always wanted but never owned a Small Sebenza, I can say that the 710 has never struck me as a substitute or cheaper replacement for one.

It has, however, struck me as an excellent little knife. It has all the quality of Sanrenmu’s OEM knives and as the unofficial ‘flagship’ of their SRM-branded blades, I think it’s worth looking at a little closer.

General Dimensions and Blade Details

The 710 has a blade length of 2-11/16”, a handle length of 3-11/16”, an overall length of 6-9/16”, and is made in China. The size of the 710 is just about right for an EDC knife. The weight, at 3.25 oz., is not inspiring, but with an all stainless steel construction you go in expecting to be disappointed in this regard.

I do think it’s worth discussing the fit and finish a little because, to be frank, Sanrenmu has a reputation for doing a slapdash job on their blades. I’ve owned two other SRM knives. My first was a 763, purchased three years ago. Out of the box it was completely adequate, besides a sloppy (but not catastrophically sloppy) edge bevel. The next, purchased maybe a year later, was a 605. Out of the box the blade centering was off, but a tightening of the pivot pin fixed this.

While neither my 763 nor 605 were bad out of the box, my 710 was almost pristine: the blade was centered, the scales were chamfered and lustrous, the edge bevel was much more even. The only issues were a slightly uneven finish on the blade itself, and blade decentering over time(easily fixable). Sanrenmu has always been seen as a bit of a gamble fit and finish-wise, but that’s never been my experience. Even so, the 710 was a step up.

The part of me that wants everything to be connected thinks that maybe, with the middle of the market bottoming out, the communal fixation on low- and high-end knives that this bottoming-out entails, and the new levels of quality and popularity Chinese companies like Kizer and Reate have been attaining, SRM has decided to work on their image and the level of quality in their products. Conspiracy theorizing aside, I find the 710’s fit and finish excellent.

The 710’s angular drop point is also excellent, a gloriously task-neutral, light-to-medium duty blade. The proportion of straight edge to belly is perfect. The tip is acute, and dropped to just the right point, making it easy to ‘lead’ a cut and accurately follow through. The 710’s blade offers very good, and very consistent, performance in all the standard EDC tasks.

An aggressive high hollow grind plays a key role here. Despite starting from fairly thick stock, the grind is very thin behind the edge, ensuring that the primary characteristic of a hollow grind – reduced friction and drag through material – is noticeable. In fact, out of the last few knives that I’ve reviewed, the 710 has done the best with cardboard cutting, the efficient, low-drag hollow grind making up for an edge that dulls fairly quickly.

As you’d expect the 710 is made from 8Cr13MoV, default budget knife blade steel. For me, 8Cr13MoV is the baseline for modern steel, setting the bar for acceptability in every area, but impressing in none other than sharpenability. I’ve never been surprised by 8Cr13MoV, but never really disappointed by it either. Adequate, a known quantity, and endearingly mediocre: what else is there to say?

Well, maybe just one last note: I think that, in our spec-obsessed modern age, we forget that poor edge retention in any modern steel is steel pretty decent: I cut through a lot of cardboard with the 710, more than I could reasonably expect to deal with in a month of standard use, before I noticed any real performance issues. I still prefer better steels, don’t get me wrong: I just think that we tend to hyperventilate when it comes to comparisons that, in 90% of the situations we find ourselves using blades in, don’t matter. Yes, 154CM or N690Co or S30V are better steels by a long shot, but in a regular week of use I certainly wouldn’t appreciate the difference.

Handle, Ergonomics, and Carry

The 710 is all stainless steel, never my preferred material for a handle, but good execution of substandard materials goes a long way with me, and on this 710 the handles are cleanly-cut and chamfered all around the edges inside and out, making them comfortable and solid-feeling in the hand.

The general lines of the handle also help. Clean and simple, just like I like it. There aren’t any unnecessary grooves, besides the acceptable choil/lock access cutout. Indeed, the handle would almost be too flat if a gentle, almost unnoticeable curve to the inside portion of the handle (the part your fingers cross over) didn’t lend some dimensionality to the knife.

The jimping on the spine of the blade is really good, the same squarish, ‘gear teeth’ jimping that you see on the CRKT Drifter. It keeps your thumb right where it needs to be to steer cuts, aided by the somewhat back-heavy balance: normally this isn’t something I like, but on a knife this small, with a blade ground so thin behind the edge, it feels right.

The texturing on the handle is less successful. Nail file or grip tape is definitely the cue visually, but it is much less textured than either. I appreciate the way it breaks up the monotony of the steel handle, but it doesn’t help with the grip during deployment, which this knife could use. The jimping and balance provide grip during use, but when you’re deploying the knife or trying to manipulate the lock you may fumble with it a little bit.

As is the case with a lot of SRM knives (Drifter included), the 710’s clip cannot be repositioned: tip-down, right-hand carry is all you get here. The lack of options is definitely a bummer, particularly considering how easily this knife could be drilled for all four positions, but the clip itself is good: slim, strong, effective. I like it much better than the wide, too-tight clip on the Drifter.

Thanks to the stainless steel scales, stowing and retrieval is effortless. This is the one area in which the handle material is an unequivocal win. Smooth retrieval/stowage and a slim overall profile make the 710 a great carry.

Deployment and Lockup

The 710 deploys via good old fashioned thumb studs and a common budget knife washer setup: a thin phosphor bronze/Teflon washer combo on one side, a lone Teflon washer on the other. This is probably a cost-saving measure, but regardless the performance here is indisputably good – great, even. Out of the box it was reliable and quick; after a drop of Nano Oil it became glass-smooth, rocket-fast: wonderful. Until I got my hands on a Vanguard Gemini, this was the early frontrunner for Highest Fidget Factor 2016.

I just don’t like framelocks. I’ve used a lot of them over the years, and I’ve never used one that didn’t immediately exhibit or quickly develop bladeplay. It isn’t really an issue, per se, because it can usually be tightened out again, but the fact is that framelocks are finicky in a way that a lockback or a liner lock just aren’t. The faster this obsession with framelocks ends, the happier I’ll be.

For all my grumpiness, however, the 710’s framelock is good. Steel framelocks are stronger and more reliable than titanium ones (and much cheaper, of course), and, while I did eventually get bladeplay, it isn’t much and yes, can be tuned back out. Besides this everything is good: the lockbar is easy to access thanks to that choil/cutout, and the lockbar disengages smoothly, every time. I like the liner lock on the G-10 Drifter better, but this’ll do.

Sanrenmu 710 Review – Final Thoughts

Sanrenmu knows how to put together an affordable, useful blade: they’ve proven that with their OEM work for Spyderco, CRKT, and others, and proven it again with their own knives. The 710 is very affordable, even in the context of the budget knife category, and it’s stiff competition for affordable favorites like the Drifter.

Sanrenmu helped to establish the budget knife archetype, and here we have as distilled a representation of that archetype as possible. The 710 is a very, very good knife.

Sanrenmu 7010 Folding Pocket Knife EDC Knife 8Cr13mov Blade Frame Lock Stainless Steel Handle with Clip

Sanrenmu 7010 is an all-steel construction knife and is very affordable for people who want to start with a cheap yet quality knife. The locking mechanism of this knife is quite proficient and supports a one-hand opening style from both sides. The knife is small and heavy, making it quite preferable for some rough applications. This foldable alloy steel knife holds the edge pretty well, even regularly.
It comes with a Frame lock mechanism. It is highly preferable for everyday carry, hunting, and camping adventures. It comes with a straight-back blade shape
It uses 8Cr13mov blade steel for the making.The blade size for this knife is 2.7 inches. The weight is pretty much on the heavier side with 3.2oz.
Blade Length: 7.0 cm / 2.76 inches; Blade Width : 2.4 cm / 0.94 inches; Unfold Length: 16.5 cm / 6.50 inches; Fold Length: 9.5 cm / 3.74 inches; Product weight: 90g
You can clip it on your belt, backpack or somewhere else you want Folding design makes it more secure and convenient to use.

I recommend purchasing the Sanrenmu 710 at Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.