USA Made EDC Knives

Emerson Mini CQC-7 Review

Last Updated: August 3, 2019
As Dan wrote in his review of the full-size model, the CQC-7 is one of the very first and most influential tactical knives in the world. Ernie Emerson’s influence on the perception and use of folding knives for self-defense is incalculable. I had wanted an Emerson knife for a long time, but my general reluctance to carry a blade over 3” meant that most of their standard models, the CQC-7 included, were a no-go. I had my eye on the Mini CQC-7 for a long time before it came back into production and I was able to pick one up.

Buy the Emerson Mini CQC-7 at BladeHQ

Buy on Amazon

History aside, my thoughts on this design are mixed. I think that the CQC-7’s pedigree has made EKI loathe to futz with the design of the knife, and users loathe to criticize it. This is a shame, because I think there’s a lot of room for improvement. Like the Delica, the Mini CQC-7 is an outdated knife. When it first released, it must have seemed like a revelation, but in 2016, it is neither the best design around, nor worth the price it is being sold at.

General Dimensions and Blade Details

The Mini CQC-7 has a blade length of 2.9”, a handle length of 4 1/8”, and an overall length of 7.25”. It weighs 4.4 oz. This is a fat knife, but one that feels quite balanced in the hand. The exact weight of a knife isn’t as important as the distribution of that weight: that’s why some light knives, like the Clipitool, can feel heavier than they are, and chunky knives like the Mini CQC-7 lighter.

The 2.9” blade, on my Mini CQC-7, is a chisel ground tanto. This is a real one-two punch in terms of things I have grown to dislike. There’s an unwarranted reverence for the tanto blade shape. I appreciate a run of straight edge on my blades but I want some belly too, and the stylized, angular shape of the American tanto lacks any at all.

Of course, it’s the tanto’s reputation as an ideal tactical blade shape that gives it its cachet. And it is a good piercer, with a quite a robust tip. But a good drop point or clip point blade would have excellent piercing capability and more than adequate tip strength, as well as a significantly more useful overall shape. I don’t carry a knife with the intention of using it for self-defense, but even if I did, I would prefer another blade shape: the tanto doesn’t do anything significantly better than a drop point or a clip point, and many things worse.

The Mini CQC-7 is chisel ground. The argument for the chisel grind is as follows: better strength, better edge retention, and it’s easier to sharpen. There have been long and articulate counterpoints made against these arguments, but for me it comes down to the simple fact that a chisel grind just cuts worse.

So much control is lost. Cuts track terribly through material. Approaching thin material like paper is a chore. I understand that some knives are made for hard use, and in these cases durability is more desirable than finesse, but here’s the thing: you can have both. The well-executed, traditional v-grind of the Paramilitary 2 can take a beating and slices like a dream.

Maybe, maybe, in the vacuum of theory, a chisel grind can withstand more abuse than a traditional V-grind, but I would bet it isn’t much more, and in what real-life scenario is it going to matter? And as far as sharpening goes: well, I guess it takes less time to sharpen one edge bevel than two, although you still need to maintain the unsharpened side of a chisel-ground knife, so you’re only saved a modicum of effort.

The steel on the Mini CQC-7 is 154CM. This is one of my favorite steels, and one I think can compete with N690Co for the title of Most Underrated Steel in the World. It is a solid upper-mid-tier steel that responds to sharpening as well as something like 8Cr13MoV, but holds an edge longer. No complaints about 154CM itself.

But the Mini CQC-7 costs about $165. As much as I’m sad to see the middle of the market drop out, one good thing that’s come from it is that we can expect a lot from knives in $150 – $200 price point. The Benchmade Valet costs $170 and has M390. The Zero Tolerance 0770 comes in Elmax for $120. You can get the Spyderco Mantra comes in M4 for $167. The Native 5 LW is half the price of the Mini CQC-7 and comes with S35VN.

This segment of the market is so competitive that I feel alright harping on the price a bit. Amidst such company, at such a price, 154CM is unacceptable – even more so when you consider that CPM-154, the powder metallurgy variant of 154CM, has been around for a while now. I think that, like the chisel grind and the tanto blade, EKI’s steel choice has been given a pass because of the historical significance of the brand and its blades, and the Mini CQC-7 suffers as a knife for it.

Handle, Ergonomics, and Carry

The Mini CQC-7’s handle is wonderful. The thickness of the knife and the swell in the middle of the handle work to make the Mini CQC-7 very comfortable in hand. The jimping is mild, really better for indexing than for locking your hand in place. The real grippiness comes from the G-10, which is very coarse without being overly aggressive like Cold Steel G-10. Superbly executed all around.

The clip is the same clip you see on almost every Emerson, and like the ergonomics it is an unqualified win. And, as thick as the knife is, I don’t mind it in the pocket. It stays out of the way and isn’t so bulky as to be noticeable when I’m walking around – again, showing how important distribution of weight is with pocket knives.

The Mini CQC-7 isn’t tapped for left hand carry. Emerson can tap it for you, but A) you have to get the knife from EKI or send it in, and B) it will cost you $25. There are a lot of knives with non-repositionable clips, even at this price point, but given how integral the wave opening is to the design of the Mini CQC-7 it should come drilled for righties and lefties out of the box. For reference, the Emerson/Kershaw collabs are all drilled for both.

Deployment and Lockup

The Mini CQC-7 can be deployed via two different methods: either by the thumb disk or by the Emerson wave opener.

The thumb disk works but is slow – pretty smooth, admittedly, but slow. It almost feels like the knife is pivoting between two layers of cloth. From what I understand the Nylatron washers here are another Emerson standby. I don’t mind them, and if they are supposedly lower-maintenance than phosphor bronze or Teflon washers then that’s fine. Just know that you’re never going to flick this knife open.

Of course, the way you’re supposed to deploy the Mini CQC-7 is with the wave opening feature. The wave is a small hook on the end of the thumb ramp that, when you pull the knife from your pocket, catches on your pants seam, opening the knife as you are retrieving it. It’s…fine, I guess? I’ve had multiple wave opening knives and I don’t really buy into the utility. I’m not good at it. I get a lot of misfires. It makes traditional retrieval a bit complicated; the wave will catch a lot of the time and half-open the knife; I’ve cut myself more than once because I pulled a half-open Mini CQC-7 out of my pocket.

It’s also not a ‘polite’ way of opening a knife around folks who may not be comfortable around edged tools. I wouldn’t fault it for that if it were a larger, more distinctly tactical knife, but even the Emerson literature implies that the Mini CQC-7 is something you can take with you anywhere. If subtlety or politeness is a concern, then you may find the wave opening method a little theatrical for the non-knife people around you.

The Mini CQC-7 has a titanium liner lock. It works. Like any lock made of titanium, I worry about wear over time, but the worst thing I can say for it over two years of ownership is that it doesn’t always lock up at the same point against the tang. If I deploy it hard it travels far across, but if I roll it slowly it just barely slides underneath. To be expected? Probably. I don’t recall noticing this happening on any steel liner lock knives I own, but regardless lockup is very good.

Emerson Mini CQC-7 Review – Final Thoughts

I’ve been hard on the Mini CQC-7. I want to stress that, in a vacuum, it’s a fine blade. But it doesn’t exist in a vacuum, and not even years of accreted Emerson mythology and reputation can save it from looking hopelessly out of step and overpriced in today’s market.

A Mini CQC-7 with CPM-154, a slimmer handle, a conventionally-ground drop point blade, and tapped for both left- and right-handed carry would be an interesting proposition at the price it’s being offered at.

But that isn’t the knife we have. We have the same blade, more or less, that Emerson was selling a decade ago, and probably the same blade they’ll be selling five years from now. I know that Ernie Emerson and his team are probably working on new designs instead of trying to update old ones, but if there were one in the lineup that deserves an update, it’s the CQC-7. This pioneering tactical knife has been left in the dust. I’d like to see it be at the vanguard again.

EMERSON MINI CQC-7 2.9 inch SATIN Plain

I recommend purchasing the Emerson Mini CQC-7 at Amazon or BladeHQ. Thanks for checking out the review.

Editor’s Note: This is a fairly critical review from Ben, but I think it is well reasoned and ultimately fair. The value proposition for knives like this Mini CQC-7 continues to shrink in light of all the advancements in the marketplace. Also, the price point of these Emersons are just painful. If this was a $100-120 knife, I think a lot of the CQC-7’s perceived shortcomings could be overlooked. Still, the CQC-7 remains a classic, and if you are curious about Emerson knives or can find a nice deal then I think this is a good place to start.

Benchmade 940-1 Review

by Benjamin Schwartz 22 Comments

Last Updated: July 13, 2019
Benchmade is a company that prefers iteration over innovation. Most of the new knives fall comfortably, and somewhat uninspiringly, within the boundaries of its recognizable, slow-to-change design language. Even really good new Benchmade knives, like the Valet, aren’t that differently from the Benchmades of five, even ten years ago.

Buy the Benchmade 940-1 at BladeHQ

Buy on Amazon

I can understand Benchmade’s adherence to its own unchanging vision to a certain extent. When the stars align it results in some unforgettable knives. To my mind there are few knives under $100 that compare to the Mini-Griptilian as an all-purpose EDC knife, and I’ve always thought the 710 looked like an incredible large folder.

But, for a lot of folks, the Warren Osborne-designed 940 is the Benchmade knife, and one that I was long overdue in trying out – partly because I prefer smaller knives, and partly because in the gleeful, dizzying descent that is the first few years of knife collecting, you’re bound to miss a few standbys in all that whirl and headiness.

Once the honeymoon phase of my collecting was over, I wanted to settle down with a nice, mid-sized Benchmade, and started to consider the 940 seriously. By the time I was ready to pull the trigger the Benchmade 940-1, a ‘premium’ rendition of the beloved blade, had released.

‘Premium’ doesn’t always mean ‘better,’ (unless there are performance benefits to Damasteel I am unaware of), and, with Benchmade’s Gold Class models it also means a 100+% increase in price. Thankfully Benchmade kept the 940-1 in their Blue Class line – the standard line for knives intended to be used. And while there is an increase in price over the vanilla 940, all of the changes Benchmade made – the carbon fiber scales and the slightly retooled handle, S90V steel – are performance-oriented. In short, while the 940 was already a classic, and I would’ve adored owning it, the 940-1 is, to my mind, the ideal version of an already incredible knife.

General Dimensions and Blade Details

The 940-1 has a blade length of 3 7/16”, a handle length of 4 ¾”, and an overall length of 7 7/8”. The weight is the first indication that the 940-1’s premium materials were chosen with performance in mind: this medium-sized folder weighs just 2.44 oz. To put that in perspective: the Spyderco Paramilitary 2, a knife that is widely lauded for the way it crams a lot of blade into a fairly lightweight package, is more than an ounce heavier (still a wonderful knife though).

The 940-1 features the iconic Osborne modified reverse tanto blade shape. Normally when I hear ‘reverse tanto’ I roll my eyes and expect tacticool sub-par performance, but thankfully that is not the case here. As a mid-sized knife, the 940-1 does everything I would expect it to do well. Punching through cardboard, whittling, even slicing an apple – it’s versatile and accommodating. Like all the best blade shapes, you feel like it was designed to do specifically whatever task you’re currently performing. I don’t love it for fine or delicate cutting tasks, but really there’s only one larger folder I know of that works well in those roles (smooches, PM2, sorry I called you fat earlier).

This good all-around performance can be attributed partly to the grind. When it comes to blade grinding, Benchmade has a lot of bad habits – swedges, facets, that sort of thing. Indeed, on paper, this grind is a mess: big swedge, the thinning-and-then-thickening out of the blade, the somewhat bulbous tip. You’d think there would be no way to make this a good slicer, but the bladesmiths at Benchmade pulled it off – if only just.

The reverse tanto can slice, pull cut, pierce, everything. It’s hardy without feeling bulky. I can cut up plastic or wood but when I slice up an apple with it I don’t get that ‘driving a railroad spike’ feeling I do from my Strider PT CC. My 940-1 is adequately thin behind the edge, but with such a small primary bevel I can see (and have heard of) unnecessary thickness before the edge bevel. In short, it’s a fine line, but, on my 940-1, they managed to walk it and make a good performer out of a very flamboyant design.

The other half of the equation is the steel: S90V. This is an exotic steel. I use the word ‘exotic’ purposefully because, even more so than something like ZDP-189 or M390, S90V feels very different from your standard steels. Its edge retention is totally singular – not in terms of how long, but rather in what manner it holds an edge.

I’ve written at length about my preference for ‘clean’ edge retention, and S90V flies in the face of my predilection: even when very sharp I found its edge quite toothy. For a long time I thought I didn’t like S90V. I didn’t expect such vicious-feeling edge from a super steel.

But when I started testing the 940-1 for review, I came to appreciate it. Again, the 940-1 is a mid-sized knife, and for mid-sized tasks that toothiness is a boon: this thing chews through wood, cardboard, plastic, and other materials, with no appreciable diminishment in its cutting capabilities. S90V is aggressive, and I approve. Don’t let the classiness of the CF fool you: the 940-1 is a barbarian in a tuxedo.

Handle, Ergonomics, and Carry

The 940-1’s handle is a textbook example of the grip-neutral handle, and I love it. A straightforward, clean-lined handle that lets you hold it however you need to – more of this please, knife makers.

Whereas the vanilla 940’s handle is composed of two aluminum scales with a titanium spacer between them, the 940-1’s carbon fiber scales are separated by two gorgeous blue standoffs. There are nested partial liners, and everything feels sturdy and durable in the hand. The carbon fiber isn’t slick, and all the edges are rounded to avoid hotspots. The knife is slim and narrow: you will barely noticed this medium-sized knife in your pocket. The clip stays nice and low and doesn’t muck up your grip.

That clip is the standard Benchmade number, the same you see on the Mini-Griptilian – although here it appears to be Parkerized instead of painted. It’s a real B+ of a clip: better than adequate, less than stellar. I like the way at looks, and I like that it’s tough, because I’m pretty hard on clips, but in a perfect world the deep-carry butterfly clip from the Contego would come standard on the 940-1.

At least, if they can get the fit just right. I know Everyday Commentary did the swap and it worked great, but when I gave the Contego clip a try, it didn’t sit flush against the scales, and clacked obnoxiously every time I held the knife, so I went back to the default clip – which, lest we forget, is good at worst.

All of these good things come together and make the 940-1 a top-tier carry in-pocket. Narrow, thin, easy to retrieve, and totally unnoticeable in carry. Wonderful. Better even than my beloved PM2 (I’m sorry baby, come back!).

Deployment and Lockup

When you’re talking about an Axis Lock, deployment and lockup are intertwined, to the extent that the nature of the Axis Lock allows for a very recognizable, friction-free deployment. Once you break in an Axis Lock you have a glass-smooth deployment for years and years. I only own one other Blue Class Benchmade knife, a Mini-Griptilian, and as good as that feels to deploy, the 940-1 is even better: this thing closes on its own if I disengage the lock and it is at any kind of angle. This is a classic Benchmade-ism I wouldn’t change.

Here is a shot of the 940-1 next to the Spyderco Para 2:

The only downside to this super-smooth deployment is a modicum of side-to-side bladeplay. Not enough to worry me on my pass/fail system for bladeplay, but definitely noticeable. But I’ve personally never had a larger knife that didn’t have a little play. It doesn’t make cutting any harder, and it doesn’t signify a weak lock. If I were using this knife for hard-use tasks it might bother me more (and I also wouldn’t want an Axis Lock for true hard use), but in the sort of things this knife is designed to do, it’s great.

And here is a parting shot of the 940-1 next to the Benchmade 551-1 G-10 Griptilian:

Benchmade 940-1 Review – Final Thoughts

When I first picked up the 940-1, I was really hoping that it would quickly get discontinued so that it became a collector’s piece and I could flip it for an exorbitant, Hinderer-esque profit. Now that I’ve really thought about the thing, though, I’m glad it’s still around. I’m fairly comfortable calling this the version of the 940 to get: you get a really rad steel and better-looking and lighter scales on top of all the other things that make the 940 a classic, and it deserves to be carried, used, and loved by as many people as possible. And when you consider that, depending on where you shop, you’re only paying about a $70 premium for it, it seems like a no-brainer.

The 940-1 is the best version of one of the best pocket knives ever designed.

Sale

Benchmade - Osborne 940 EDC Knife with Black Carbon Fiber Handle (940-1)

ALL-AROUND UTILITY: A quintessential EDC tool that combines simplicity with unmatched function, no matter the application; Ideal for pretty much everything.
HIGH-END CPM-S90V STEEL: Uniform microstructure gives it a superior edge when it comes to wear and corrosion resistance ; Reverse tanto blade is nimble, versatile, and made for the outdoors.
ULTRALIGHT CARBON FIBER HANDLE: Exceptionally strong with a featherweight feel in the hand and gnarled texture across the board for a sure grip
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Standard clip; Light as a feather for easy carrying and a comfortable grip.
EVERYDAY CARRY: With its slim profile and lightweight design, the 940-1 is the perfect addition to your gear collection, backpack, survival kit, tackle box, and more.

I recommend purchasing the Benchmade 940-1 at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco UK Penknife (UKPK) Review

by Benjamin Schwartz 3 Comments

Last Updated: August 12, 2019
For a long time I believed that the Delica was not a well-designed knife. I realized recently, however, that what I actually meant was that, compared to many other designs in the Spyderco catalog, the Delica is simply outdated. Everything that I find irksome about it – the compromised ergonomics, VG-10 steel, lack of a forward choil – has been fixed in other, similarly-sized designs.

Buy the Spyderco UKPK at BladeHQ

Buy on Amazon

Not least among these better designs is the Caly 3. An improvement over the Delica 4 in just about every way, the only issue with the Caly 3 is that it’s two to three times the price of the Delica, depending on which flavor you choose.

But there’s a much less-well-known knife in the Spyderco catalog, a knife that is essentially a super lightweight, slipjoint Caly 3, and that costs only about as much as a Delica. It’s called the UK Penknife in FRN, a truly underrated knife, and one that I think is well worth checking out.

General Dimensions and Blade Details

The Spyderco UK Penknife lineup is kind of confusing. The first version, a G-10 model, was released in 2004, designed to conform to knife laws in the United Kingdom, which are stricter than those in the US. In 2005 the DKPK, a variant with a non-functioning Spyder Hole designed with the even stricter Danish knife laws in mind, was released.

In 2010, the Lightweight models were introduced, with FRN handle scales instead of G-10. These models came in three different handle colors, with two different blade shapes, each available with plain, partially-serrated, or fully-serrated edges.

In 2012, most of the color and edge options were discontinued, leaving only the black-handled models, and in 2013 the grind was changed from a hollow/saber grind to a full-flat one. My particular UK Penknife is from the discontinued generation, with maroon handle scales and a leaf-shaped, plain edge blade. The only difference between the currently available model and my own is the grind, which I will discuss below.

History aside, here’s what we’re looking at with the UK Penknife: a blade length of 2 15/16”, a handle length of 4”, and an overall length of 6 7/8”. It weighs just 1.9 oz; this weight is achieved not only because there are no liners beneath the scales, but because Spyderco rather brilliantly shortened the length of the spring, so that it only runs out to only about 60% of the spine; here’s a picture of it:

The UK Penknife is made in the Spyderco’s Golden, Colorado factory. On my particular knife, the fit and finish was superb. Everything was nicely finished and pleasing to the eye. The thing I could take issue with is the slightly sloppy edge grind: on side the bevel terminates earlier than the other. Of course, this doesn’t affect performance, so it’s not something I’m losing sleep over.

The Spyderco leaf shape blade has proven its utility over many years, across many knives. The UK Penknife’s particular rendition is almost exactly the same as that of the Caly 3’s, which means a narrower blade profile than something like the Sage knives or the Native, and with a better, more acute tip than the snub-nosed Delica. Like a traditional drop point blade, the leaf shape is a winner not so much because it excels in any one category, but rather because it has a such a wide vocabulary of use: cutting, piercing, mild prying, digging; the leaf shape can do it all.

As good as the blade shape is, the grind on my UK Penknife is a sticking point. It’s a hollow saber grind, and, like the similar grind on some Delica 4 models, it just doesn’t slice all that well. Compare it to the Caly 3’s full flat grind, and it isn’t even close. As Grayson pointed out in his Aculus review, there are definitely a lot of cutting tasks that don’t require slicing, but the fact is that in the case of the UK Penknife, a full flat grind would have just worked better: you would get slicing performance without losing anything. Spyderco must’ve realized this, because the newest model is full flat ground, and that knife, I am sure, would both cut and slice with aplomb.

The UK Penknife’s blade is made from CTS-BD1 steel. This is an American stainless steel that’s really only seen in Spyderco knives, but one that I really like. I think of it as a next-generation entry-level steel. It holds an edge better, and is less rust-prone, than AUS-8 or 8CR13MoV, and sharpens much easier than VG-10. The thing that I like best about it, though, is that it keeps what I call a ‘clean’ edge: that is to say, as it dulls it doesn’t get toothy or cut any rougher, even if it gets more difficult to make a cut. I’ve always cited N690Co as a steel that keeps a clean edge; BD1 is right up there with it. Also worth noting is the finish on my UK Penknife: a muted, mild stonewash, it’s something I haven’t seen on any other Spyderco knife, and it looks really nice.

Handle, Ergonomics, and Carry

The UK Penknife’s Caly 3 heritage really comes through in the ergonomics department. A handle with simple, unobtrusive contours, it manages the amazing trick of making any grip you care to hold it in seem like the one it was designed for. The forward half-and-half finger choil, a Spyderco staple, is characteristically excellent, giving you control over the blade during use.

Some people don’t like the feel of FRN. I can understand that: in some knives, it feels cheap, flimsy, a compromise rather than a considered choice. However, not all polymers are created equal, and the FRN that the UK Peknife is made from appears to be top shelf. I wouldn’t ever say it feels luxurious or anything like that, it exudes quality. I particularly like that the edges are all rounded over, imitating the smooth, comfortable feel of chamfered G-10 or titanium. In fact, I prefer the FRN scales of the UK Penknife to the CF laminate and steel liners of the Caly 3; they’re more comfortable and durable.

The wire clip is the same one on the Caly 3, the deep-carry wire clip. I don’t really know if I understand the ‘advantages’ of deep carry, but with so many terrible clip designs on the market right now, I’m just happy with something that works, even if I personally would prefer the spoon clip for its rigidity: I have broken two wire clips in the past.

Deployment and Lockup

Because it is a slipjoint, the UK Penknife opens a lot slower than locking knives: the tension of the spring against the tang remains all the way through the deployment process, generating friction. This doesn’t mean that you can’t flick the UK Penknife open; you can, but it takes a little finesse to do so, and really, I don’t mind just slow-rolling it open. There’s an interesting sort of very mild half-stop too, which I like because it, along with the audible snick you get when the knife is fully opened, gives you plenty of feedback while opening it.

When open, the UK Penknife feels very secure. Like the Pingo, it doesn’t take a ton of force to close it, which I prefer: I don’t like wrestling with my slipjoints to close them. I feel like the UK Penknife will be plenty safe in any reasonable role. But beyond this, holding the knife with your forefinger in the half-and-half choil, you create a sort of lock with your hand – a very nice touch that is echoed in many of Spyderco’s slipjoints. Needless to say, with any cutting tool, and in most real-life cutting tasks, good sense will do more work than a lock would in preventing accidents.

Spyderco UK Penknife Review – Final Thoughts

The version of the UK Penknife that I have is a near-perfect, lightweight, lockless version of the Caly 3, hindered only by a weird grind. The 2013 UK Penknife fixes that issue and might just be the best entry level-priced Spyderco on the market.

Once you get in the $80-120 range, the competition gets a lot fiercer, but even compared to the those knives – the Spyderco Native 5, the Chapparal, the Paramilitary 2 – the UK Penknife is not without its appeal. For a knife based off one of the perennial darlings of the Spyderco lineup, the UK Penknife is a surprisingly underrated gem.

Spyderco UK Penknife Leaf Lightweight Folding Utility Pocket Knife - Black FRN Handle with PlainEdge, Full-Flat Grind, CTS BD1 Steel Blade and SlipIt - Everyday Carry - C94PBK

Leaf Shaped Blade: A blade shape developed and refined by Spyderco. It is similar to a spearpoint, but not completely symmetrical, and has a more acute point and typically no swedge.
SlipIt: A non-locking system that combines the convenience of clip carry and one-hand opening with a socially friendly notch-joint mechanism that helps hold the blade safely open during use, but does not mechanically lock it.
FRN Handle: Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles.
Full-Flat Grind: This knife features a blade ground with flat bevels that extend from the spine all the way to the cutting edge. This grind reduces drag during cutting and decreases overall weight.
Specifications: Closed Length (Inches): 3.95, Overall Length (Inches): 6.88, Blade Length (Inches):2.93, Blade Steel: CTS BD1, Grind: Full-Flat

If you want to buy a Spyderco UKPK, I recommend purchasing it at Amazon or BladeHQ. Thanks for reading.

Hinderer XM-18 3″ Review

by Dan Jackson 18 Comments

Last Updated: August 5, 2019
If you have been following Hinderer Knives on the secondary market, you will have noticed that the prices have fallen dramatically over the past couple years. A few years ago, it would have been hard to find a used XM-18 for less than $700. Some were fetching closer to a grand. Today, if you hunt around you can find them for close to retail ($385), and some online stores even carry Hinderer products. That’s right, you may actually have a shot at buying the knives from a retailer(!)

Buy the Hinderer XM-18 3″ at BladeHQ

Buy on Amazon

I am not sure why the prices of Hinderers have dropped. It may be due to increased manufacturing capabilities so that supply actually begins to meet demand. Or perhaps the company is facing pressure from the rise of mid techs and high end Chinese knives. Or maybe it has something to do with excellent Hinderer / ZT collabs like the 0562CF driving down demand?

This is great news, regardless of the cause of the price drop. Personally, the reduction in price has allowed me to carry and use my 3″ XM-18. Don’t get me wrong, I carried and used my 3.5, but after shelling out over $500 for it I was pretty ginger with the knife. Plus it was really too big for me to carry regularly. I eventually sold it off. Now that the prices have come down to earth, I picked up a 3″ version of XM-18 to try.

General Dimensions and Blade Details

The XM-18 3″ has an overall length of 7″, a 3″ blade, weighs 3.6 ounces, and is made in the USA. While the XM-18 3.5 is an impressive piece of hardware, it is hardly an every day carry (EDC) item in my book. It is built like a tank, with a thick slab of titanium, meaty blade, and over-sized stand offs. The 3.5 is a much more substantial knife than the 3. The 3″ version of the XM-18 is better for my minimalist style of daily carry. As a result this knife has been getting a ton of pocket time. I would consider this to be either an EDC knife, or a collectible.

Hinderer used to only offer the production XM in a drop point (with a spanto or “slicer” grind). Over the past year or two they have rolled out a number of different blade shapes including a clip point, “skinner”, and the wharncliffe version shown here. Rick’s wharncliffe design has grown on me. The shape is attractive and the blade has been executed flawlessly. The knife is ground thin and cuts well. The edge is about as neat of an edge as I have seen. The grinds are crisp and the stonewashed finish is subtle.

My XM came in S35VN stainless steel – just like the blade on my 3.5, the new Chris Reeve knives, and a number of other higher end offerings I have sampled. So at this point I am very familiar with S35VN as a blade steel, but I have still taken the time to put this knife through its paces.

This XM-18 has spent many weekends clipped to my pocket, and has broken down innumerable boxes, and assisted with home improvement tasks. I like the combination of S35VN steel and wharncliffe blade; this is like the worlds most expensive box cutter. The blade tracks easily through material, and the straight edge results in pressure being uniformly applied throughout the entire cut. The absence of belly means that this won’t be a great hunting or filet knife, but the straight edge is useful for a lot of other jobs. I have had zero issues with corrosion and have not much need to sharpen (although it certainly dulls after use – this isn’t some miracle steel). I have mostly maintained the edge on my strop and it continues to shave hair and push cut paper with regular maintenance. S35VN is excellent stuff, and you will find the 3″ XM in S35VN to be a capable cutter.

Handle, Ergonomics, and Pocket Clip

Handle construction of the XM-18 3, follows Rick’s pattern of titanium lock side, custom stainless steel standoffs, titanium liner and G10 handle scale. A slotted pivot helps hold it all together. Everything has been executed with surgical precision. The titanium on my model has been stonewashed and has held up well. The filler tab is flush with the handle. Every detail has been carefully considered and masterfully executed. What I especially enjoy about the 3″ version of this knife is how light the handle is. It is significantly lighter than the 3.5, and despite everything being over built the knife still tucks away neatly into the pocket.

The XM series includes one of my favorite ergonomic features: the forward finger choil. As demonstrated on some of my all time favorites like the Paramilitary 2, American Lawman, and Sage 1, this forward choil gives the user several options in gripping the knife. I find myself using the choil for detail work, and not using it when breaking down a box or engaged in an extended cutting chore. If you ignore the forward choil, the rest of the handle is plenty adequate for a full grip, and the simple shape naturally conforms to the hand. There is a run of jimping on the spine. The jimping is wide, and it strikes a good balance between providing traction and not shredding your thumb. The corrugated G10 handle scale and jimping by the pommel provides additional traction. This little XM is not going to fall out of your hand easily.

The 3″ XM features the same titanium pocket clip found on the rest of the XM line. It’s a spoon style clip that fits into a recess machined into the handle. This is not a deep carry clip, but when mounted for tip up carry the knife buries into the pocket decently. While it isn’t my all time favorite clip design, it certainly works. The clip has good retention and is reasonably discrete. The handle has been milled for right side tip up or tip down carry, and a “filler tab” is included to cover up the recess in the handle.

I like the way the 3″ XM carries. It feels even lighter than it’s 3.6 ounces would suggest, and the knife is as thin as my beloved Sage 1. For these reasons the 3″ has been getting a lot of pocket time, and it has proven itself to be a viable EDC option for me.

Deployment and Lockup

Hinderer sells the 3″ XM-18 in flipper and non-flipper variants. I have a flipper version, but it might as well be a non-flipper. The flipping action is pathetic. The blade barely makes it out to half mast – even when preloading the flipper. This is a shame. I still like the knife, but when you consider that a $30 Swindle flips better than this, it makes you wonder what is going on at Hinderer HQ. I have heard rumors that Hinderer was going to fix the weak detent on their new knives. I am not sure when this wharncliffe was made, but I don’t think they have been offering the blade shape for longer than a year. Thankfully, thumb studs are also included on the knife, and they can be used to “coin flip” the blade open. All XMs come with teflon washers, and my little 3″ is no different. The action is smooth, but personally I still prefer phosphor bronze (and suspect bronze washers would help the action).

The titanium framelock on this knife is extremely nice. It engages early and without stick. There is no blade play and the blade is perfectly centered. Hinderer has this part down to a science and it shows. This is an excellent framelock and it is certainly up for heavy cutting. Blade centering on my knife is perfect.

Hinderer XM-18 3″ Review – Final Thoughts

The high end titanium framelock flipper market has become fiercely competitive over the years, and shows zero sign of slowing down. Hinderer’s XM series has long been considered a gold standard for titanium framelock knives and high end carry pieces. If you get your hands on one it will not take long to understand why. The knives are beautifully made to exceptionally high tolerances.

Although the prices have dropped these are still far from cheap. Most people reading this probably think I am nuts to own a $400 knife, and that is OK. I’ll spare everyone the “value” discussion – either you want an XM (and are willing to pay for it) or you don’t. But at close to MSRP I think these are excellent knives, built extremely well, and I am surprised at how much I have enjoyed the 3″ XM. I bought it on a whim, and it has won me over. This is a great high end EDC option because it carries and cuts well, and oozes quality. I just wish the flipper actually flipped. That would be the cherry on top of this knife sundae. But as it stands there is still a lot to enjoy.

This is a rugged no-nonsense tool that will serve it owner well for many many years, and I think the 3″ version is practical for a normal guy to EDC if you can get around the price tag and sub-par flipping action. Recommended.

Rick Hinderer Knives XM-18 3″ – $425.00
From: BladeHQ

RICK HINDERER XM-18 3.0 SPANTO-WORKING FINISH

KnifeArt has a great selection of XM-18s, and occasionally they pop up on BladeHQ as well. And lately, they have been popping up on Amazon too. I recommend purchasing them at these retailers. Thank you for read.

Zero Tolerance 0808 Review

by Dan Jackson 9 Comments

Last Updated: August 3, 2019
Zero Tolerance has had some interesting releases in 2015. What especially intrigued me was their addition of a few smaller folders to the line up. The 0450, 0900 and 0808 all feature 3.25″ and smaller blades and come in under 5 ounces. This may not seem like much of an accomplishment, but considering the brand’s origins – monster folders like the 0300 and 0560 – these new offerings are much smaller and more pocket friendly.

Buy the Zero Tolerance 0808 at BladeHQ

Buy on Amazon

Of course there is still plenty room for monster truck knives in their roster. Designs like the 0999 assure us that ZT has no intentions of cutting short the freak show any time soon. But at least part their line up is trending towards smaller, more practical daily carry blades.

The 0808 was designed by renown custom knife maker Todd Rexford. Todd also designed the 0801, which was a successful knife, but seemed a little plain. The 0808 strikes me as a much bolder design.

When originally commenting on the knife on an episode of Gear Geeks Live, I said that it reminds me more of a surgical instrument than a pocket knife. I still feel that way. The spare design, shiny hardware, and monochromatic color scheme all lend a futuristic feel to the knife. It was one of ZTs more intriguing offerings for the year, and with 2016 fast approaching I felt like it was high time to examine the 808.

General Dimensions and Blade Details

The 0808 has an overall length of 7.625″, a 3.25″ blade, weighs 4.3 ounces, and is made in the USA. It is a good deal smaller than the 0801 and is noticeably lighter. Personally, I like that, and the knife is bound to appeal more to the urban Every Day Carry (EDC) crowd then some of ZT’s older offerings. Still, the knife has some heft to it, thanks to full titanium construction. This isn’t a gent’s folder or ultralight EDC.

The blade of the 0808 is what I would describe as a modified clip point, although I think you could also argue that it is a modified wharncliffe. Regardless, it’s an atypical and angular blade shape that seems more at home on the set of Aliens than it does in my pocket. It has a very fine tip and a high flat grind. There is a non-functional swedge that adds to the visual appeal of the knife and follows the line of the handle. The grinds are all “belt finished” satin while the flats are lightly stone washed.

Zero Tolerance selected S35VN for the blade, a USA made steel forged by Crucible. I have taken a shine to S35VN over the past couple years. I like it more than its predecessor, S30V, largely because I have found it easier to sharpen. S35VN displays all of the other characteristics I am looking for in a higher end steel, including decent edge retention and corrosion resistance.

The 0808 cuts well. The stock is thick for a smaller knife, but the flat grind gets thin behind the edge and the needle fine tip is excellent for detail work. I had no problem breaking down boxes, although the absence of belly made it less ideal for food prep. I have had no issues with rust or corrosion. The edge is easy to maintain and so far all I have needed to do to strop the knife and occasionally run it on the fine stones of my Spyderco Sharpmaker.

Handle, Ergonomics, and Pocket Clip

The handle of the 0808 features titanium handle slabs, and a chunky polished titanium backspacer. Everything is held together with stainless steel hardware. I like the clean look of the 808 and the details are (mostly) subtle. The faceted handle and high polished pivot and backspacer lend to the knife’s futuristic look. I could do without the engraved “Zero Tolerance” logo on the show side, but it isn’t too bad and I suppose they have to place their logo somewhere. The handle slabs have been stonewashed, which helps hide wear. The fit and finish is excellent.

The ergonomics of the knife are simple and comfortable. I am able to get a full grip without any issue. There are no finger choils and there is no jimping except for 5 grooves on the flipper tab. Some may bemoan the apparent lack of traction. Admittedly, I have not used this knife to skin a deer or engage in hand to hand combat, but I had no issues with the knife slipping out of control under normal use. I didn’t notice anything in the way of hot spots either. But if you are looking for a serious “traction plan” then you will need to either bust out the skateboard tape or mosey on to stickier pastures.

I do want to mention that the titanium backspacer is substantial, and the knife does feel slightly off balance. This isn’t a chopper or a fighting knife, and it was not a big deal for me, but it is worth noting.

The pocket clip of the 0808 is not my favorite aspect of the knife. It shares some interesting similarities to the Hinderer XM-18’s clip, but leaves a lot of the knife exposed when it is in your pocket. That said, the handle looks like it will accept ZT’s deep carry flip found on knives like the original 0560.

I am not necessarily a deep carry clip snob, but I don’t like having a 3/4″ of a knife poking out of my pocket either. Retention is OK, but because this is a smooth titanium handle, and because we have a relatively heavy knife, I also have some concerns about the 0808 falling out of the pocket when the clip is used with lighter fabrics. While the clip isn’t a death knell for the review, it is my biggest gripe with the knife.

Deployment and Lockup

For my money, Zero Tolerance makes some of the best flippers. This 0808 is no exception. The knife comes with a caged bearing system and a dialed in detent. The blade flies open without fail every time, and is extremely secure in the closed position. My bearings are incredibly smooth and the blade falls shut upon disengagement. It is worth noting, that in the past ZT has used a blue nylon cage for their bearings. This time there is a metal cage – perhaps to accommodate the smaller footprint of the 808.

The 808 is a titanium framelock with a stainless steel lockbar insert. ZT makes a lot of titanium framelocks with steel lockbar inserts, and lockup is on my knife is early and secure. No blade play and no stick. This is how a framelock should be. My blade is not perfectly centered, but it is close.

Zero Tolerance 0808 Review – Final Thoughts

Once again Zero Tolerance has managed to deliver the goods. This is a design from one of the hottest knifemakers in the industry right now, and Todd’s design has been executed brilliantly with top notch materials and superior fit and finish. The knife is also priced reasonably when you consider that you are getting a USA made folder with premium materials and all the bells and whistles.

I like that Zero Tolerance decided to embrace smaller knives in 2015. Yet the 0808 isn’t short on quality or detail, and this is probably my favorite knife from ZT for 2015. The pocket clip is my biggest gripe, and that can be fixed with an aftermarket clip (I have seen some on Ebay for around $30, as time goes on the prices on these will likely drop). Besides that, I find little to complain about when it comes to the 808. I will be curious to see if Zero Tolerance continues in the direction of these smaller blades.

All in all, if you are at all interested in the 0808 I can safely recommend it. At the time of writing this review Amazon is selling these for around $150. At that price the 0808 is unbeatable if you are looking for a titanium framelock flipper. Not sure if that is a pricing error or what, but it’s a heck of a deal.

Zero Tolerance Kershaw KVT Pocket Knife, 3.25” Stainless Steel Blade with Manual Opening and Flipper, Titanium Handle with Deep-Carry Pocketclip, Small Folding Knife

FOLDING POCKET KNIFE: Made in collaboration with Todd Rexford, the Kershaw Zero Tolerance Titanium pocket knife is the perfect everyday carry. KVT ball-bearing system offers smooth function.
STAINLESS STEEL 3.25" BLADE: Made from S35VN stainless steel, the Zero Tolerance blade takes a sharp edge and is easy to resharpen when needed. Blade resists chipping and provides excellent edge retention.
COMFORTABLE, ERGONOMIC HANDLE: Textured and contoured for a secure grip, the Zero Tolerance’s titanium, stonewashed finish handle is prepared for any cutting action.
MANUAL OPENING mechanism and convenient flipper offers quick and easy access with simple, one-handed opening. Frame lock secures the blade when not in use.
ATTRACTIVE, INDUSTRIAL DESIGN: Stonewashed and satin finish on the blade and stonewashed finish on the titanium handle presents a stylish look. This EDC pocket knife is sure to turn heads wherever you go.

I recommend purchasing the 0808 at Amazon or BladeHQ.

Great Eastern Cutlery #73 “Cody Scout” Review

by Grayson Parker 8 Comments

Last Update: August 11, 2019
Just a few years ago, it seemed that fans of traditional pocket knives and modern “tactical” folders didn’t intersect. Enthusiasts of modern designs (myself included) were often leery of the carbon steel, clipless carry, and two-handed opening. Before the days of Instagram, the most popular way for people to show off their everyday carry was via forum posts; and while it wasn’t uncommon to see something akin to a Case Peanut pictured alongside a Paramilitary 2, traditional knives were largely relegated to a back-up role. It didn’t help that more than a few of the companies producing traditional knives were bought out and had their labor outsourced to China, which meant that (at the time) quality of materials and manufacture plummeted.

Buy the the GEC Cody Scout at KnivesShipFree

However, over the last few years, companies like Great Eastern Cutlery and Queen have been taking up a larger share of the market for pocket knives. One of the first patterns produced by Great Eastern was the #73, which is based on the two-bladed trapper pattern, one of the classic American traditional knives. I went with a single blade pattern in green micarta. The blade pattern sacrifices some traditional flare in favor of greater utility, while the scales avoid some of the wear problems associated with the natural materials more often used with this type of knife.

General Dimensions and Blade Details

The “Cody Scout” has a single clip point blade, measuring at 3 1/8 inches of 1095 high carbon steel, with a closed length of 3 ¾ inches, an open length of 6 15/16 inches, and weighs in at 2.25 ounces. Oftentimes, clip points come with an exaggerated top swedge, but fortunately Great Eastern chose a sleek, useful blade profile. The already thin stock is taken down to a very fine edge, though yours may need some reprofiling. Evidently Tom Krein is offering regrinds of several GEC knives. Personally, the stock is thin enough that I can’t see the value in having the blade reprofiled, but if anyone can do it right it’s Tom Krein.

Once I had the edge established on mine, it performed with aplomb at slicing tasks, though the 1095 needs regular touch ups. I’ve had better luck with my Sharpmaker than I have with my strop but your mileage may vary. 1095 is frequently seen on traditional folders, and all knives produced by Great Eastern under the Tidioute Cutlery brand make use of it. This steel tends to deform rather than chip out, so those of you who are tired of dealing with S30V’s chipping problems may be intrigued.

As for rust resistance, the steel on my #73 has performed admirably. If needed, I wipe down the blade after use. A dark patina has developed, which helps prevent the iron-like taste high carbon steels can leave during food preparation, and also protects the knife from the more serious red rust. It may sound odd, but I’ve had more problems with rust on 440c and Aus8a blades (both of which are technically stainless). This iteration of the #73 lacks most of the branding typically seen on knives produced by Great Eastern Cutlery. Apart from a tang stamp on each side of the blade, there are no markings, even on the shield inlay.

Handle, Ergonomics and Carry

Many traditional knives feature natural materials such as bone, stag, or wood as the covers (for you modern knife guys, scales). These materials are beautiful, warm to the touch, and offer an additional element of refinement over the usual selection of G10 and carbon fiber. However, as natural materials, they are more subject to warping and deformation, which may or may not be a concern to you. I live in what is essentially a desert, complete with triple digits, extreme aridity, and the occasional dust storm (a la The Mummy), and felt more comfortable with micarta. It is a material I never tire of, as it has an organic appearance (similar to bone or wood) but with most of the rigidity and resilience of synthetic materials.

Here, the green linen micarta has been sanded down to a smooth polish. The chamfering on the handles combined with the simple trapper frame makes the knife a pleasure in the hand. I’ve never had hot spots develop in use, and the blade is finished so well that it makes a fantastic worry stone (though I can’t advise that in public). Apart from a hairline gap between the back spring and the brass liner (which is only detectable by holding it up to the light), the quality of manufacturing is immaculate. The #73 is a popular pattern in the GEC line-up, so you will likely be able to select the cover material that suits you best.

I purchased a leather slip case along with the #73. Prior experience with traditionals and large Swiss Army Knives has shown me that clipless knives (barring exceptionally odd dimensions) tend to roll around in the pocket in the course of a day, and quickly become a hassle. The leather pouch is made by KnivesShipFree and distributes the weight of the knife in pocket. While it does add a step to accessing the blade, it makes a knife that I would normally consider unpocketable quite pleasant. Besides, if you are interested in quick access, a traditional is likely not the correct call to begin with. The quality of the slip case is excellent, but one of the nylon stitches (melted together) came loose. Quick application of Fabri-Tac solved the issue, though it’s something to be aware of. I opted for the weatherproof finish for this pouch, but that costs extra.

Walk and Talk

The pull on the Cody Scout is smooth, snappy, and very stout. Many reported that the #73 (not the Cody Scout in particular) was a “nail-breaker,” though mine isn’t nearly as tough. It’s worth noting that many of my friends have a hard time opening this knife. If you are acclimated to slip joints, you should be fine, but keep in mind this knife has a reputation for being a bear to open. I prefer to get the pull started with my thumbnail and pinch the blade from that point, as I find the extra purchase helps me open the knife in a more secure fashion. The half-stop doesn’t jerk the blade away from your fingers, which is a concern for some. I prefer slip joints with a strong pull, but that doesn’t mean this knife is safer because of it. As always, use knife sense and exercise caution.

GEC #73 Cody Scout – Final Thoughts

Traditional folders also exist in a space that many knife companies are leaving behind. As framelock flippers have taken over the market, we’ve seen a massive spike of options in the $200 plus range, while the options at less than $100 have stagnated. The average knife from Great Eastern Cutlery will cost you between $70 and $100, which undercuts many of the new offerings from Spyderco, Benchmade, and Zero Tolerance. Although the materials are not bleeding edge, they are from an era when knives were used much more frequently.

One of the reasons folks tossed a small traditional in their pockets on top of the modern knife they were carrying was that traditional knives have a very nonthreatening appearance. Modern folders can attract funny looks in the wrong environment, but traditional folders and multitools don’t seem to suffer from the same problem.

Whether due to clever marketing, an oversaturation of titanium framelock flippers, or a good value proposition, traditional knives are making a comeback. The tight manufacturing tolerances of companies such as Great Eastern and Queen lead me to believe that the resurgence of traditional knives will last.

I’ve been more than satisfied with the #73 in the month or so that I’ve owned it. The 1095 requires regular maintenance, but apart from that, this is close to my ideal everyday carry knife. If you’re the type to fuss over natural materials but want to give traditional knives a try, consider this blade. Personally, the “Cody Scout” seem more timeless than many traditional knives in production, which appear to be thoroughly grounded in the early twentieth century. Even if you’re only looking at traditionals as back-ups to more modern pocketknives, I’d point you to the #73. It possesses enough charm to put all but the most fervent of anti-knife folk at ease, but also wouldn’t be out of place next to a Sebenza.

GEC #73 Cody Scout – From $82.53
From: KnivesShipFree

Editor: I recommend purchasing the Cody Scout (and any of its derivatives) at KniveShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.