Folding Knives

Buck 505 Knight Review

Last Updated: July 26, 2019
When we think of Buck lockbacks, our first thought goes to the 110. That’s the knife that launched a genre, and started thousands on their journey as folding knife collectors. The 110 remains one of the most iconic and popular folding knives today. At least on paper. In practice it’s a bit of a boat anchor, and by today’s standards you can see that we have come a long way from the 110.

Buy the Buck 505 at BladeHQ

Buy on Amazon

If you are looking for some of the old school charm of the wood and bolsters of the 110, but want something more practical, then I think the Buck 505 “Knight” may be a better option.

The 505 shares the 110’s aesthetic, but is a fraction of the size. It’s slim, light, yet polished up enough to wander into gentleman’s folder territory. And it’s also well under $50. Frankly I was surprised to learn about this knife, and picked up after a reader asked me to review it. I figured it would have come up more in the circles I frequent. At any rate, the 505 shall be a mystery no longer, and I look forward to sharing a review of this sleeper blade with you today.

General Dimensions and Blade Details

The Buck 505, aka the “Knight” has an overall length of 4.6″, a 1.875″ blade, and weighs 1.35 ounces. The Knight is made in the USA. The 505 Knight is one of the smallest knives in my collection. It’s tiny, even when compared with my Spyderco Dragonfly. It may be too small for some, or relegated to the role of a backup knife. Still, it’s a capable little blade and has performed admirably as an EDC knife.

The 505 has a simple drop point blade with a high hollow grind. It is simple with a belt satin finish. The tip is not particularly fine, and when they put the edge on this knife they bumped the plunge line with the belt grinder. The edge is almost a continual belly. It has been neatly applied, and came razor sharp from the factory.

Predictably this knife comes in Buck’s 420HC steel. I was actually pleasantly surprised with how this little knife cut. It still shaved hair after breaking down a good size cardboard box. It does fine with opening letters and packages, slicing fruit, and performing other light duty EDC chores. I have been able to maintain the edge with light stropping. Maybe that Bos heat treat is more than mere marketing.

Handle, Ergonomics and Carry

The 505’s handle is made of stainless steel. There are no liners, and the handle is milled from 2 slabs of steel that sandwich a stainless steel backspacer and lock bar. Stabilized Rosewood handle scales are riveted on. Handle construction is simple but solid. The bolsters and rivets have been buffed to a high polish, and the transition between the scales and the bolsters is baby bottom smooth. The end result is a knife with gem like qualities. This attention to detail elevates the 505 from humble tool to more of a more refined piece.

The downside to such a small knife is you have less to grip onto. With the 505 you are afforded a 3 finger grip, maybe a 3.5 if you choke up onto the blade. However, you can still get a lot done with the Knight. I have no issue breaking down boxes, cutting string, and using the 505 for other light duty tasks. I wouldn’t recommend the knife to a rancher or police officer, but the 505 makes for a capable backup knife, a light duty EDC, or even a gents folder.

Although it would spoil the lines, I can see the advantage to having a lanyard hole on this knife. It might make the 505 a little easier to retrieve from the pocket and provide something for your pinky to grab onto a la the CRKT Minimalist. That said, I’ve never been a fan of lanyards on folding knives, and I don’t miss having one on the Knight.

There is no pocket clip on the 505, so I can only comment on how this knife carries loose in the pocket. The Knight is the kind of knife that disappears into the pocket. That should come as no surprise as it’s a slim sub 2 ounce knife. You may want to consider carrying the 505 in a slip sheath if you can find or make one small enough. Another option could be or carrying the 505 in the coin pocket of your jeans.

Deployment and Lockup

This is traditional lockback, and the 505 comes with a nail nick to open the blade. It’s a generous nail nick, and that combined with the saber grind gives you plenty to grip on to as you grip the knife. The backspring is mild. There is no chance of the knife opening accidentally, but it won’t take much effort to manipulate the blade open either.

That same mild backspring makes the lockback mechanism easy to disengage. The tab is placed at the very end of the knife, so there is no danger of accidentally releasing the blade in your hand, but when you are ready to close the 505 it will not be a chore. Lockup is tight and free of blade play. The 505 performs just like you would expect from a good lockback. Blade centering is perfect on my example.

Buck 505 Knight Review – Final Thoughts

The 505 Knight may be the surprisingly good little lockback that you have never heard of. Or maybe I’ve been living under a rock. Regardless, I am glad I came across the 505 as I think it represents an interesting value proposition. This is a more practical alternative to the 110 for the urban EDC crowd, and is an all around nice knife.

The biggest potential issue is whether the 505 swings too far in the opposite direction of the 110. While the 110 is a big and bulky knife, the 505 is diminutive. It is probably the smallest knife I have reviewed. You can’t get a full 4 finger grip on it, and the absence of a pocket clip or lanyard hole increases the likelihood of misplacing the knife. Personally, I haven’t been bothered by the small size, but there are limitations to the 505 and they may be too great for you to seriously consider this as your daily carry. In that instance the 505 may still be appealing as a backup EDC option or a dress knife.

Another option may be to jump up to the 501 Squire or the 503 Prince. There aren’t any particularly good size comparisons on these knives, but here is a link to an old BladeForums thread with some pictures and opinions. Maybe I need to pick some up for a proper comparison?

For under $40 you get a solidly built folder that is made in the USA and nicely finished. The cutting performance is surprising given the 420 HC steel. That said, the Knight is not perfect. I wish a little more care was taken when they put the edge on it, but for the money I’m not sure I can complain. And the handle construction and performance make up for it. I say buy it if you like it.

Buck Knives 505 Knight Folding Lockback Pocket Knife, 1-7/8" 420HC Blade, EDC

Razor sharp & VERSATILE- 1-7/8" Drop point 420HC steel blade delivers excellent strength, edge retention, and corrosion resistance. The full bellied blade is suitable for every Day tasks. Closed length 2-3/4", weight 1. 5 oz.
Strength and safety - easy to open with a nail notch on the blade. The lock back mechanism locks the blade open for reliable strength and safety while you work
Handsome handle - Rosewood handle with nickel silver bolsters provide a knife that is as handy as it is handsome!
Classic and Compact - the Knight is the smallest knife in the 500 series. Its slim design fits perfectly in your pocket for easy access and every Day use.
Made in the USA - Forever - Since 1902 Buck Knives has offered a Lifetime on our knives because we believe in the integrity of our products. This knife is proudly made in the USA.

I recommend purchasing the Buck 505 Knight at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 560 Freek Review

by Dan Jackson 11 Comments

Last Updated: July 15, 2019

As much as I enjoy picking up the latest “gee whiz” must have knife of the moment, I get the most satisfaction in sharing a great knife that may have flown under the radar. This particular knife has flown so far under the radar, I would not have even heard about it if reader Darren hadn’t gone out of his way to send me a couple emails about the knife and how much he enjoyed it. Thank you, Darren.

Buy the Benchmade Freek at BladeHQ

Buy on Amazon

Enter the Benchmade 560 Freek. Like our friend the Bruised Forehead, the Freek didn’t win the knife name lottery. It also doesn’t benefit from being designed by a high profile knifemaker. And I don’t recall much in the way of fanfare from Benchmade or the knife collector community when the Freek arrived on the scene. It was quietly released. Rather than being a subject of media attention, the Freek has slowly earned a reputation for being a practical tool from those who have given this unassuming knife a chance.

I liken the Freek to the Benchmade Volli, another no-frills knife that didn’t get much attention, but may be be one of the best all-round EDC knives that Benchmade has released in the past 5 years. The Freek is cut from the same cloth. It’s another function over form design that is worth consideration if you are in the marketing for a largish EDC knife.

General Dimensions and Blade Details

The Freek has an overall length of 8.46″, a 3.6″ blade, and it weighs 3.72 ounces. This knife is made in America. As I mentioned earlier, I’d classify the 560 Freek as a large EDC knife. It could possibly be used as a hunting knife, as it has a good belly and shares the blade profile of their Saddle Mountain Skinner. Of course a knife of this size could also be used as a duty knife for a police officer, or perhaps pressed in to other self defense type applications. This is a versatile knife.

The drop point blade is distinguished by a curving thumb ramp and high flat grind. The blade is 2.9mm thick, and gets thin behind the edge thanks in part to that high flat grind. The edge has been neatly applied, and like on pretty much all the Benchmades I’ve owned over the years there, is a sharpening choil allowing you to sharpen the edge all the way down to the heel. The tip is fine, but the the deep belly keeps it out of the way. Again, this lends me to believe this could be a decent hunting knife, although frankly I’ve never been on a hunt in my life.

Benchmade has gone with tried and true S30V steel for the Freek. Although S30V has fallen slightly out of favor thanks to the widespread adoption of it’s more exotic cousin S35VN, I find that Benchmade does a particularly good job with their S30V. Case in point my Volli with its 2.5mm thick blade cuts like almost nothing else I own. That thing is a laser. The Freek is right up there. This knife is a phenomenal slicer, the S30V blade holds an excellent edge, and I found it to be an easy edge to maintain with strops and the ceramic rods from my Spyderco Sharpmaker.

This knife makes quick work of cardboard, laughs in the face of of your lunchtime apple, and will capably assist you with all those odd cutting tasks that crop up in our daily lives. Much like the Volli, the Freek is a knife that I looked forward to busting out when it came time to break down a box or open a package. It’s a performer and the S30V blade steel punches above its weight thanks to the heat treat and grind.

Handle, Ergonomics, and Pocket Clip

The handle is where things get interesting, and also where the knife is bound to alienate a significant section of the audience. Like the Griptilian, this is a plastic handled knife with partial stainless steel liners. Unlike the Griptilian, the Freek has a unique high density rubber (“Versaflex”) overmold that is bonded to the plastic. The end result is a lightweight grippy design that is unlike anything else in my collection.

Some will love the lightweight nature of the design and the non-slip feel to the handle. Others will dismiss it as being cheap and plasticy. If you couldn’t stand the feel of the handles of the original Griptilian, then my guess is you will want to skip the Freek. But if you don’t mind trading G10 for a large ultra light knife, then the Freek could be a winner for you.

The ergonomics of the Freek benefit from a streamlined handle design. There are few curves, and little reliance on jimping except for the thumb ramp. Although the handle is textured, it’s not an abrasive knife in the hand. The end result is a no-frills handle that is comfortable and secure in all kinds of conditions. The Freek easily accommodates my larger hand, and the handle is well suited for extended use and hard tasks.

This knife comes from the factory with Benchmade’s split arrow clip. I’ve long been a fan of this clip, and here it is situated for ambidextrous tip-up only carry. This is a discrete knife that and buries deeply in the pocket. Benchmade left part of the FRN endoskeleton exposed where the pocket clip meets the handle, and that makes for easy insertion and extraction of the knife from your pocket.

At well under 4 ounces I found the Freek to be an easy knife to tote around. It’s about as thick as the Griptilian and carries comparably. On that note, it’s worth stating that the Freek is actually almost half an inch longer than the Griptilian but weighs .16 ounces less.

Deployment and Lockup

There isn’t a whole heck of a lot new here to say in this section. This is a thumb stud axis lock knife. A tried and true design. Here the thumb studs and phosphor bronze washers work just as great as they did on my original Griptilian. While bearings are all the rage, I think something needs to be said for bronze washers. Especially for a thumb stud equipped user knife like the Freek. Bronze washers are still exceptionally smooth and are ideal for working knives like this.

I continue to appreciate the axis lock for it’s simple and intuitive design. Plus I always appreciate that this is a fully ambidextrous knife. Lockup is secure, but as you would expect from a plastic handled partial liner axis lock knife, there is a little side to side blade play. Nothing to get upset about, just a trade off in the design. Personally, I’m happy to exchange a modicum of side to side blade play for all the practicality and utility that this design offers. Your mileage may vary.

Blade centering is pretty good. It slightly favors the pocket clip side of my knife, and is far from rubbing.

Benchmade 560 Freek Review – Final Thoughts

For those wanting a premium lightweight work knife with an over 3.5″ blade, I think the Freek is a no-brainer. Benchmade has been refining this type of knife for years. It’s like a Griptilian but it is leaner and meaner, yet also slightly larger. Perhaps it’s oriented slightly more towards the lightweight camping and hunting ground. Benchmade doesn’t offer much insight in their product descriptions, but for some reason I keep going back to hunting when I consider the Freek.

Those that can’t stand the plastic scales on the original Griptilian would be well served to steer clear of the Freek. Instead check out the Volli or the G-10 Griptilian. Those models will also provide you with great cutting performance and ergonomics, but will also be a little stouter than the Freek.

I am glad Darren called this model to my attention. I hope in writing this review I have turned at least a couple people on to an excellent “sleeper” knife from Benchmade.

Benchmade - Freek 560, Drop-Point Blade, Plain Edge, Satin Finish, Black/Grey Versaflex Handle, Made in the USA

HIGH-QUALITY: The CPM-S30V stainless steel blade is extremely well-balanced, offering superb edge qualities and rust resistance. The Grivory and Versaflex dual durometer handle offers strength, comfort, and grip.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Freek 560 is a manual knife that can be opened and closed with either hand.
ALWAYS READY: The 560's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Freek 560's drop-point, utility blade style and all-around functionality make it ideal for everyday carry.

I recommend purchasing the Benchmade 560 Freek at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kizer Cutlery Guru Review

by Benjamin Schwartz 9 Comments

Last Updated: July 30, 2019
It’s been interesting to watch Kizer’s evolution over the years. They had an ambitious, albeit amorphous, beginning, with somewhat forgettable designs rendered in high-quality materials at head-turning prices; I still get a little jolt when I see the Sliver going for $70 with S35VN steel.

Buy the Kizer Guru at BladeHQ

Buy on Amazon

Then Kizer knives had the brilliant idea of bringing in talented knife designers to take full advantage of their manufacturing capabilities and great prices. It wasn’t their first collaboration knife, but the Ray Laconico-designed Gemini was the a big hit for Kizer, and the amount of collaborations rolling out of their doors hasn’t slowed down since. The company realizes a stunning amount of models, from makers at all stages of their career: well-known names like Ray Laconico and Matt Diskin appear alongside promising up and comers like Justin Lundquist and Elija Isham.

Matt Degnan is a maker whose work has been brought to wider recognition with several Kizer collabs. Degnan is behind the Roach, the Kane, and most recently the Guru. The first two models didn’t move the needle, but the Guru seemed much more my speed.

As with their competitor Zero Tolerance, I haven’t really found “my Kizer” yet. I reviewed the 3404, which was just fine but ultimately forgettable. I had some enthusiasm for the Vanguard Gemini but that has waned some since my review (which in itself wasn’t unqualified in its praise). The Guru stood out in Kizer’s recent offerings as a model that might just be able to go the distance. Let’s take a closer look.

Full Disclosure: Kizer provided me with a Guru free of charge for the purposes of the review. This in no way affected my reviewing process nor did it alter my opinions or verdict.

Blade Dimensions and General Details

The Guru has a blade length of 2 7/8”, with a cutting edge of 2 11/16”, a handle length of 4 15/16”, and an overall length of 7 15/16”. It weighs 3.96 oz. and is made in China.

The Guru has a “Sheepsfoot Looking Up” kind of blade shape that is attractive and unusual. Functionally, it is all gently-curved belly, and that’s fine. With a whopping .14” thick blade stock and a relatively short sabre grind the Guru isn’t much of a slicer. It’s thicker behind the edge than my Strider PT. But while it isn’t my thing, a hard use grind isn’t immediately grounds for failure. The problem is, the Guru might be less “ground for durability” and more just “poorly ground,” with confusing peaks and valleys in wildly different types of cutting tasks.

I don’t usually cut food with my knives, but I did a little food prep with the Guru and can confirm you’re going to leave behind a David Cronenberg-esque crime scene cutting fruit and other foodstuffs with this thing – it ain’t pretty. In cardboard and wood it can function decently, but only if you “aim” the edge at a specific angle; otherwise it bunches up. Strangely, the one area in which the Guru performs well is wharncliffe/sheepsfoot-style tasks, where the point is in play more than the full edge: cutting tape when opening a box, for instance; surprisingly delicate tasks for such a burly blade to excel in.

S35VN is becoming so prevalent in high-end knives that we reviewers are quickly approaching 8Cr13MoV levels of redundancy when it comes to writing about it. It’s great, Kizer’s iteration is great, you’ll love it. Editor’s note: And as always you can find a deeper dive into knife steel here.

One thing to note: this is the third Kizer I’ve had (the second with S35VN) and while overall fit and finish is great, they don’t get their knives real sharp before boxing them up. In the case of knives with super steels I think it’s fair for the user to expect a good edge out of the box: not everyone has the means or the knowledge to immediately sharpen these more difficult-to-work-with steels. This will be an even bigger problem as they transition into less amenable high-end steels like M390.

Handle, Ergonomics, and Pocket Clip

The Guru’s handle is so close to being great. A forward finger choil is almost always a guarantor of decent if not mind-blowing ergos, but here it’s more of a stumbling block. Kizer chose to begin the blade right at the end of the choil, with nothing between the end of the choil and the beginning of the sharpened edge. This is a common choice among manufacturers and not peculiar to Kizer, but it does mean you need to be careful when you’re choking up on the Guru: it would be very easy for your finger to slide forward onto the edge.

Back off the choil and the Guru accommodates three fingers in the middle portion of the handle and one on the other side of the beak. This isn’t always a successful setup but here, mainly because the post-beak butt end of the knife is large and flat, it works okay. The problem is, when you’re not using the forward choil you’re more than an inch away from the start of the cutting edge – not really acceptable for a knife of this size, and it squanders the fine control that makes a sheepsfoot blade shine in use.

There may be issues with the ergonomics but the Guru’s pocket clip is great. This is the way a sculpted clip should work. It’s durable, secure, with plenty of spring tension, and looks really nice. The rounded edges eliminate hotspots and even though the Guru is kind of portly it keeps it in place in your pocket. Other than the non-reversability I have no complaints. This is such an improvement over the nightmare clips on early Kizer models.

Deployment and Lockup

In my review of the Spyderco Mantra 1 I noted that the ball bearing pivot seemed to work better with the thumb hole than the flipper, and while I’ll never opt for ball bearings over standard washers I have been curious to further explore how they played with non-flipper deployment methods.

My Guru is the thumb stud variant and the ball bearing deployment is very good. Once the thick blade gets over the stiff detent it flies open. Kizer deserves particular praise for that detent. I’ve handled many Kizers and none of them had those detent issues that we see on other frame locks. You can put all the pressure you want on the Guru’s lock bar and it will still deploy reliably.

Lockup is similarly well-done. The stainless steel insert makes contact against about 30% of the tang. There is no blade play, and disengagement is stick-free and smooth. The only issue I have is that, in closing, the blade wants to fall shut quite quickly – a little dangerous in my opinion. The detent is so aggressive that it functions as a kind of half-stop, catching the knife again as you’re closing it, so that helps a little bit, but it’s still something to be aware of.

Kizer Guru Review – Final Thoughts

The Guru is well-made as all Kizers are, but I would have liked to see more time spent honing this one for great performance in addition to its mechanical competence. It looks cool, and there’s nothing wrong with picking up a sub-optimal knife because you like the way it looks, but for me, the wedgey edge and incorrect finger choil are a fatal combination and overwhelm any other charms this design has.

Kizer reset the bar for what we could expect for our dollar, but now that the rest of the industry has caught up their designs have to pull their weight in an increasingly crowded market segment, and I can’t think of any objective reason to recommend the Guru. It doesn’t quite manage to bridge the gap between “interesting design” and “great tool.”

Kizer Cutlery Guru Framelock Folding Knife,3in,S35VN Steel,Standard Edge,Satin,Gray KI3504K2

Steel: CPM-S35VN Handle: 6AL4V Titanium Blade Length: 2.97" Overall: 7.43"

If you are thinking of buying a Kizer Guru, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Cold Steel Broken Skull Review

by Dan Jackson 7 Comments

I try not to read too much into the name of a knife. After all, the name has no impact on the performance. But sometimes good knives can have bad names. Even after learning that this knife was designed by “Stone Cold” Steve Austin and named after his Broken Skull Ranch, I still thought the Broken Skull was a pretty dumb name for a pocket knife. Hopefully I don’t receive a “Stone Cold Stunner” for writing this.

Buy the Cold Steel Broken Skull at BladeHQ

Buy on Amazon

But much in the same way that I am a sucker for Emerson knives, I’m a sucker for these Cold Steel offerings. That is because despite all the theatrics, lawsuits, and marketing bullshit they make some good stuff.

The American Lawman is a perennial EDC favorite of mine, while pieces like the Mini Tuff Lite and Ultimate ~~Warrior~~ Hunter. continue to satisfy in niche situations when I want a small or overbuilt folder. The Broken Skull, even with it’s unfortunate name, struck me as an another imminently useful pocket knife from CS, if on the larger side.

General Dimensions and Blade Details

The Cold Steel Broken Skull has an overall length of 9.25″, a 4.00″ blade, and weighs 3.10 ounces. This knife is made in Taiwan. The Broken Skull reminds me of an Spyderco Endura. My buddy in law school enjoyed his Endura because it was an easy knife to pocket but packed a lot of blade. I think he would enjoy the Broken Skull. It is also thin, light, and packs a big blade, yet this feels like a much stronger knife than the Endura.

While a 4″ blade is probably too big of a knife for most people to EDC, if you enjoy carrying a small and big pocket knife at the same time I could see the Broken Skull being your big knife. Of course if you are a fan of “tactical” folders then the Broken Skull could also be up your alley.

The Broken Skull has a long thin exaggerated clip point blade. This blade provides you with plenty of cutting edge, a little bit of belly, and a fine tip. This blade has a full flat grind, and gets thin behind the edge. A black DLC coating rounds things out.

Like all the new higher end Cold Steel folders, this knife comes in CTS-XHP stainless steel. I like CTS-XHP because it holds a good edge and is easy to sharpen. Its a nice step up from the AUS-8 Cold Steel used to run in all their knives, although it does raise the price.

I have used this Broken Skull as an EDC knife, and in that capacity I have opened and broken down many boxes, performed some light food prep, and and have worked with it a fair bit in my back yard. I have found the Broken Skull to be a good slicer. Both the grind and profile are thin and the knife zips through boxes, slices fruit easily, and bites deeply into green wood. The DLC coating has held up excellently with little in the way of visible wear.

This is a useful blade shape with good geometry for slicing, and Cold Steel’s recent switch to CTS-XHP steel with a DLC coating is a significant upgrade over their AUS-8 and teflon coated blades of yore. While the long profile lends the knife to penetrating cuts, you can still get plenty of chores done with the Broken Skull.

Handle, Ergonomics, and Pocket Clip

Much like the American Lawman, the Broken Skull has a linerless G-10 handle with a black aluminum backspacer. What sets the Broken Skull apart is how thin the G10 is. It makes for a slim knife, but the handle is still strong with zero flex in it.

Handle construction is of high quality with counter sunk button screws, chamferred G-10, and all black hardware. Cold Steel offers this model in a variety of handle colors – a nice bonus. The blue version happened to catch my eye but they have everything from standard black to pink.

The long simple handle of the the Broken Skull provides you with plenty of ergonomic options. You can choke up on the knife and make use of the simple jimping on the spine of the G10, or you can pull back on the handle and avail yourself of almost 8″ of reach. Either way the knife feels comfortable and secure. The texture of the G10 is relatively mild compared to knives like the American Lawman and Emerson’s offerings. Still, there is plenty of grip here and I don’t think anyone will mistake this for a slippery knife.

Cold Steel provides you with 2 pocket clips – one for left hand carry and one for right hand carry. The clip is short and strong, and is oriented for deep carry. The combination of the G10 and strong clip make this knife something of a chore to extract and remove from your pocket. It will also shred your pants pockets if you aren’t careful. I’m not wild about the clip for this reason. Too tight, and difficult to use.

On the flip side, the clip is discrete and it is highly unlikely that the Broken Skull will ever work its way out of the pocket. Because this knife is thin and light it carries well despite being over 5.25″ long when closed.

Deployment and Lockup

Like most of Cold Steel’s folding knife offerings, the Broken Skull comes with their asymmetrical slotted thumb studs. They work to manipulate the blade open, but this is not a knife you will be able to flick open easily thanks to the strong backspring. It’s best to roll the blade open with your thumb. The action is smooth thanks in part to phosphor bronze washers, and once you get past the halfway point, the knife snaps open.

For lockup we have the Tri-Ad lock. The Tri-Ad lock has become a staple for Cold Steel, and for good reason. It’s simple, strong, and secure. There is no blade play on my knife, despite it lacking any sort of metal liners, and the G10 being relatively thin. This is even when I try to wiggle the blade from the very tip – quite a feat considering the long blade. Construction is solid and the Tri-Ad lock is robust.

Blade centering is almost perfect on my knife.

Cold Steel Broken Skull Review – Final Thoughts

Nice pocket knife. Dumb name. That is how I feel about the Broken Skull. For normal EDC use the Broken Skull is going to be excessively long, and that is probably my biggest hangup with the knife. But I think people who enjoy carrying a long and slim folding knife will find a lot to like here for around $75. The materials are premium. Construction is simple yet functional. I even like how you have a choice of color for the handles. The Broken Skull is an efficient tool and even with a silly name I can’t help but like it for what it is.

If I could make changes, I find the clip to be too small and stiff, and I’d like to see them offer this knife in a smaller size, but I think the Broken Skull compliments Cold Steel’s catalog. They have plenty of 3-3.5″ folders. This model is a little different and that is not a bad thing.

I recommend the Broken Skull to those seeking a long slim folding knife or fans of the design.

Broken Skull IV (Blue)

Product Type: Knife
Package Dimensions: 2.032 L x 4.826 W x 13.97 H (centimeters)
Country of Origin: Taiwan, Province Of China
Package Weight: 0.022 kilograms

I recommend buying the Broken Skull at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kizer Alter Ego Review

by Grayson Parker 1 Comment

Last Updated: September 7, 2019
Kizer’s 2017 catalog wasn’t released to the same fanfare as Spyderco’s or KAI’s. That may be partially due to the fact that it’s massive. Most of their old designs are still on there, so don’t worry, there’s no need for panic purchases a la Spyderco’s discontinued list. At the same time, Kizer has collaborated with a host of new makers so up and coming your plaid-bedecked neighbor who won’t shut up about vinyl records hasn’t even heard of them.

Buy the Kizer Alter Ego at BladeHQ

Buy on Amazon

In the interests of full disclosure, you should know that this review sample was provided by Kizer. While that won’t have an impact on my impartiality, there is the risk that the product I was sent was double or triple checked for quality, and that my sample is the best of the brood. That risk is counterweighted by Kizer’s deserved reputation for high manufacturing tolerances. In other words, I don’t think you need to worry about it.

The Kizer Alter Ego falls into their “Bladesmith” line, which is seemingly reserved for collaborations with custom makers. I was surprised to learn this, as the Alter Ego seems aesthetically similar to many of Kizer’s in-house designs. Searching for “Kim Ning” and “Kim Ning Knives” yielded no results outside of Kizer products. It may be that he is better known internationally, or that he doesn’t have an English website, but I suspect that (much like Jim McNair of KAI) he’s a full time designer for Kizer.

General Dimensions and Blade Details

The Kizer Alter Ego has a 3.55” blade housed in a 4.625” handle. Overall, it’s 8.125” long and weighs 4.91 oz, with a blade thickness of .1375”. For some this isn’t terribly large, but it’s definitely more knife than I’m accustomed to. To their credit Kizer kept the weight pretty low. As a point of comparison, it weighs only .6 ounces more than the Zero Tolerance 0900, but has a .85” longer blade. Those numbers might not look impressive on paper, but trust me when I say that the difference is significant in person.

The blade itself is made of S35VN, a powder metallurgy steel developed by Crucible as the successor to S30V. Prior to the revolution of high-end Chinese manufacturers, a steel like this would have been unheard of on a Chinese knife. Times have changed, and now it’s sound business sense for companies like Kizer to import high performance steels. S35VN is a particular favorite of mine. It retains S30V’s wear and rust resistance, but doesn’t chip as frequently. I’ve used the Alter Ego frequently (if not rigorously) over the past month, and the experience matched my expectations.

As nice as the S35VN is, I wish it had been paired with a plainer utilitarian blade. The Alter Ego sports a drop point blade with a profile that echoes the Viper Dan 2 or the ZT0770 (both blade shapes that I love), but which is drawn up into a recurve closer to the base of the blade. While by no means a dramatic recurve, it exaggerates the belly enough to make certain tasks – press cutting in food preparation, for example – less predictable than a continuous curve or a straight edge. If I found myself cutting rope on a regular basis the recurve would have more appeal, but my needs are fairly pedestrian.

Handle, Ergonomics, and Carry

Much like the blade, the handle is comprised of organic, muscular lines. In some respects it’s comparable to the Hinderer design aesthetic, but where Hinderer relies on hard angles and a very industrial appearance, Kizer turns to curves that are almost anatomical. In keeping with this, ornamentation is kept to a minimum. I’m not normally a fan of decorative pivots, but Kizer’s rendition is eye-catching, subtle, and most importantly is torx compatible.

The ergonomics on the Alter Ego are good, if narrow in application. It’s difficult to tell from the photos and product literature, but the handle coerces your fingers into something akin to a pistol grip. That’s not necessarily a downside, especially if you’re in the market for a tactical folder. This knife won’t leave your hand unless you want it to. However, it’s less than ideal for everyday tasks, such as preparing a picnic lunch or opening a clamshell package.

While the design is ergonomically sound, if not to my taste, there is one flaw in the execution: the pocket clip. It’s not offensively bad (like this little guy), but it does generate enough of a hot spot to cause some discomfort. Gloves and careful finger placement mitigate this problem. The clip aside, Kizer put a lot of work into making this knife comfortable. All the edges are buffed and all the corners are softened. Kizer clearly knows how to make a knife comfortable.

The Alter Ego is pretty quiet in the pocket. No one could call it svelte – it is fairly wide, and nearly an inch of the handle sticks out past the edge of the pocket – but for a knife this size, it’s better than I expected. The aforementioned contouring keeps it from feeling like a brick in your pants, and though the clip detracts from the blade’s ergonomics, it also ensures that an errant seat belt can’t make off with your rather expensive pocketknife.

Deployment and Lock-Up

As with most of Kizer knives, the Alter Ego’s blade is deployed via flipper tab. Sadly, Kizer committed something of a cardinal sin in the design stages of the Alter Ego: they put aggressive jimping right under the flipper tab. For the first two or three days I carried it, my index finger would slam right into the aforementioned jimping every time I flipped it open, leaving my finger raw and smarting. Eventually my technique improved and the problem went away, but it was a literal pain to deal with. It’s a shame that such a flaw wasn’t caught earlier, because otherwise deployment on the Alter Ego is perfect. The detent is crisp and firm, and there’s not a hint of grit in the bearing pivot. It’s not as snappy as the action on my ZT0900 – there’s more of a hydraulic feel to it – but that’s a matter of taste, not quality. Deployment on both knives is as smooth as glass.

Commensurate with Kizer’s reputation, the frame lock on the Alter Ego is perfectly executed. There is zero wiggle in the lock while deployed, and because of the steel insert there’s no break in period or risk of the lock face galling inappropriately over time. Since arrival, the lock has consistently engaged the blade tang at about 50%, though it should be noted that 100% of the steel insert engages the tang. Said insert also functions as an overtravel stop. To round things out, Kizer also milled a slight cut out in the handle to make the lock more accessible.

Kizer Alter Ego Review – Final Thoughts

At a price point that hovers between 160USD and 180USD, the Alter Ego is competing with the premier lines of most brands; within the genre – titanium framelock flippers – it’s directly competing with most of Zero Tolerance’s catalog. While I’m not going to wade into the waters of which brand I prefer (the gaming industry has console wars covered), I can say that the Alter Ego is as well made as any normal run ZT. That’s pretty high praise, all things considered.

End of the day, this knife isn’t for me. It’s too big for my purposes and definitely has a different end user in mind. That said, everything else about the knife – the manufacturing tolerances, materials, attention to detail – is fantastic, and clues me into just how much I’ve been missing out on by not trying a Kizer sooner. If the design of this knife appeals to you, I’d wholeheartedly recommend it. If the quality of the Alter Ego is representative of their entire catalog (and the community’s response indicates that such is true) then I wouldn’t hesitate to buy any Kizer knife if the design appealed to me.

Kizer Cutlery 4492 Alter Ego Framelock 4 5/8" closed

I recommend purchasing the Kizer Alter Ego at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Emerson Sheepdog Review

by Dan Jackson 10 Comments

Last Updated: July 30, 2019
Having reviewed many Emerson knives over the years, and reaching largely the same conclusions, you would think I am a glutton for punishment in selecting the Emerson Sheep Dog for review. However, the Sheepdog brings something new to the table. This is the first Emerson flipper I have reviewed, and it features their new ball bearing system. Plus the handle has been drilled and tapped for ambidextrous carry. This is big news from a company that is very much set in their ways.

Buy the Emerson Sheepdog at BladeHQ

Buy on Amazon

This isn’t the only flipper Emerson has done. They also released the CQC-7 flipper. The CQC-7 flipper seems interesting on paper, as flippers have been in vogue for years now and the CQC-7 is the knife that put Emerson on the map, but the design is uninspired and the end result is literally a CQC-7 with a gigantic shark fin flipper pasted onto it. I can understand the appeal to some, but personally I wasn’t interested.

In contrast the Sheepdog isn’t a model where the flipper was an afterthought. The knife was designed to be a flipper, per the specifications of Lt. Col. David Grossman, the man who approached Ernest Emerson about collaborating on a knife and designing something for David’s company Sheepdog Knife and Gun.

David Grossman is the author of On Killing: The Psychological Cost of Learning to Kill in War and Society, a seminal text on the psychology of the act of killing, how most men are reluctant to kill, and how law enforcement and military have trained people to overcome this reluctance. I’m sure On Killing makes for stimulating beach reading, but I didn’t pick up the Sheepdog to write a book report.

General Dimensions and Blade Details

The Sheepdog has an overall length of 8.4″, a 3.5″ blade, and it weighs 5.54 ounces. This knife is made in the USA. This is a purpose built utility and self defense knife geared towards law enforcement (hence the name). Grossman wanted something functional for a Police officer’s daily work, yet relatively non-threatening. The handle is generous, while the blade is big enough to get work done without being over the top. As usual this won’t be practical for your average urban or suburban EDC, but no Emerson is. I have carried my knife primarily on evenings and weekends.

The Sheepdog comes with your choice of a clip point or spear point blade. Personally, I like the look of the spear point a little more. I think that visually the spear point blade it balances out the handle a little better. It’s also a little less aggressive looking than the clip point. Both designs provide good all round utility and come with partial flat grinds. Both blade shapes are cut from 1/8″ thick blade stock.

As usual the blade on this Emerson is immaculate. Crisp lines, beautiful satin grinds, a generous sharpening choil, and sparkling stonewashed flats. The tip on my clip point is needle fine, while the spear point version appears to have a little more meat behind it. The primary grind is “V” ground, while the edge is only applied to the show side.

Like all the other Emerson’s I have reviewed, the Sheepdog comes in 154CM. At this point the 154CM stainless steel is a known quality. It comes sharp and stays sharp for a good while. Maintenance is easy. You sharpen the bevel side as you normally would, and that quickly raises a prominent burr. I then knock the burr off with a single swipe on a ceramic rod, and the blade is good to go. I have a suspicion that Emerson heat treats their 154CM on the softer side. It makes it an easy knife to sharpen, but you lose a little edge retention and the blade shows wear without much effort.

The Sheepdog takes a nice toothy edge, and has no problem with boxes, and I broke down plenty in the wake of assembling furniture and appliances for my rental house. I also used the knife on wood and for some mild food prep. The clip point is a practical blade shape, although it’s a little aggressive for use in public. It slices well, but also offers excellent penetration ability. Corrosion resistance is pretty good, but 154CM will stain if you aren’t careful with it.

Handle, Ergonomics, and Pocket Clip

The handle is classic Emerson: coarse peel-ply black G10 scales over a stainless steel non-locking liner, a titanium locking liner, black stand offs, Phillips head body screws, and a slotted pivot. Fit and finish is good on my knife. Emerson got a bad rap for their knives a few years ago for off-centered blades, tooling marks on the liners, late lockups, etc. These days those issues have largely disappeared. All the parts line up, the body screws are counter sunk, the edges are chamferred, and the pocket clip screws don’t stick out past the liners. If I had to nit-pick, I’d say that one of my liners is about .1 mm proud on one spot of the handle, but beyond that I can’t complain. This is a solid knife and it isn’t horrible to look at either.

The ergonomics of the Sheepdog may be inspired by Grossman, but they are pure Emerson. Like most of his designs the handle has an almost orthotic quality to it. The simple shape comes with decades of experience and the end result works great. Your index finger sinks into a deep finger groove while the flared pommel catches your pinky perfectly and the gently sloping spine supports your palm. This handle design would keep your hand in place work without excessive handle texturing, but of course Emerson offers the knife with sandpaper like G-10, and a broad thumb ramp with mild jimping. The end result is an undeniably comfortable and functional handle, but the G-10 will shred your pockets if you aren’t careful.

I know not everyone will share in my excitement, but I think the craziest feature on this knife is the fact that the handle has been drilled and tapped to accept a pocket clip on either side of the handle. Holy shit, what a concept. Some people may be less enthusiastic about this great advance in technology, after all these days you can get a $5 gas station knife that is drilled and tapped for ambidextrous carry, but for Emerson this is a big freaking deal. I’m glad Grossman got more than his company logo on this knife. Congratulations on getting this thing to come ready for ambidextrous placement of the pocket clip.

The clip is the same black parkerized stainless steel spring clip that you will find on every other standard Emerson. It’s a nice functional clip. Here it has been placed on the high on the handle for relatively deep carry. It’s not super deep carry, but you can easily retrieve the knife. The Sheepdog carries pretty well. It’s a relatively big knife, and it is thick, but it’s not going anywhere with this pants-shredding G-10. It carries as you would expect it to.

Deployment and Lockup

While the three extra holes in the handle are a big step forward, the flipper is what truly sells the Sheepdog. Since this is one of Emerson’s first flipper I wasn’t sure how successful of a flipper this would be. I was pleasantly surprised with what arrived. The Sheepdog flips well thanks in part to a large flipper tab, relatively heavy blade, and GTC bearing system. The detent doesn’t feel an stronger than your typical Emerson, and you can use the thumb disk or wave if you want, but it still provides enough resistance for the blade to flip open every time. The blade doesn’t pop like a Zero Tolerance flipper, but it isn’t a wet noodle either. I’d say it’s a solid 6 on a 1-10 scale, with a 5 being a Spyderco Domino, and a 10 being a ZT 454.

The GTC bearing system is worth another paragraph. Regular readers know I am not a fan of the teflon washers found in the regular Emersons. These bearings are like night and day in comparison. While the teflon washers are slow and gritty, these bearings are fast, smooth, and a pleasure to operate. This is is a caged bearing system designed by Brazilian custom knifemaker Gustavo Cecchini of GTC Knives. Gus knows what he is doing, and Emerson has done a great job implementing this bearing system into their knives.

Here is a parting size comparison with my Spyderco Paramilitary 2:

For lockup we have your typical titanium liner lock. As usual I found my lock was sticky out of the box. I applied a little Sharpie marker to the tang of the knife, and it helped tremendously in alleviating the lock stick. I have to re-apply the Sharpie every couple weeks but it makes the knife much more pleasurable to operate.

Blade centering is perfect on my knife.

Emerson Sheepdog Review – Final Thoughts

I think this is the Emerson knife a lot of people have been waiting for. While the company has made minor incremental improvements to their products over the years, the knives have remained largely unchanged. This Sheepdog is still very much a traditional Emerson, but the inclusion of bearings and an ambidextrous pocket clip are big steps. The flipper is successful as well. This isn’t the sleekest flipper design, and the action won’t rival a ZT, but the flipper is functional and less clumsy looking than the CQC-7 flipper. I think they did a good job with it.

I find little to complain about here. I am ecstatic about the switch to bearings. I wish they did this for all their knives. The extra pocket clip holes are nice too. The liner lock still sticks but there is a workaround if you are willing to periodically apply Sharpie marker to the tang of the knife.

I suppose the biggest hangup for me is the bulkiness of this knife. That shouldn’t come as a surprise as Emerson knives are always big and thick. You notice them in the pocket and people will notice you if you use the knife in a public setting. If you already realize that going into the purchase, then I think you will find a lot to like with the Sheepdog. It features significant improvements over past Emerson knives.

I easily recommend the Sheepdog for Emerson fans. But I also recommend it for someone seeking a large folding “tactical” knife. This is my favorite Emerson to date, and is a successful collaboration with Lt. Col. Grossman. I hope it inspires the company to try more new things.

Emerson Sheep Dog - Spear Point Blade - Folding Knife with Wave SF

I recommend purchasing the Emerson Sheepdog at Amazon, and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.