Cold Steel

Cold Steel Broken Skull Review

I try not to read too much into the name of a knife. After all, the name has no impact on the performance. But sometimes good knives can have bad names. Even after learning that this knife was designed by “Stone Cold” Steve Austin and named after his Broken Skull Ranch, I still thought the Broken Skull was a pretty dumb name for a pocket knife. Hopefully I don’t receive a “Stone Cold Stunner” for writing this.

Buy the Cold Steel Broken Skull at BladeHQ

Buy on Amazon

But much in the same way that I am a sucker for Emerson knives, I’m a sucker for these Cold Steel offerings. That is because despite all the theatrics, lawsuits, and marketing bullshit they make some good stuff.

The American Lawman is a perennial EDC favorite of mine, while pieces like the Mini Tuff Lite and Ultimate ~~Warrior~~ Hunter. continue to satisfy in niche situations when I want a small or overbuilt folder. The Broken Skull, even with it’s unfortunate name, struck me as an another imminently useful pocket knife from CS, if on the larger side.

General Dimensions and Blade Details

The Cold Steel Broken Skull has an overall length of 9.25″, a 4.00″ blade, and weighs 3.10 ounces. This knife is made in Taiwan. The Broken Skull reminds me of an Spyderco Endura. My buddy in law school enjoyed his Endura because it was an easy knife to pocket but packed a lot of blade. I think he would enjoy the Broken Skull. It is also thin, light, and packs a big blade, yet this feels like a much stronger knife than the Endura.

While a 4″ blade is probably too big of a knife for most people to EDC, if you enjoy carrying a small and big pocket knife at the same time I could see the Broken Skull being your big knife. Of course if you are a fan of “tactical” folders then the Broken Skull could also be up your alley.

The Broken Skull has a long thin exaggerated clip point blade. This blade provides you with plenty of cutting edge, a little bit of belly, and a fine tip. This blade has a full flat grind, and gets thin behind the edge. A black DLC coating rounds things out.

Like all the new higher end Cold Steel folders, this knife comes in CTS-XHP stainless steel. I like CTS-XHP because it holds a good edge and is easy to sharpen. Its a nice step up from the AUS-8 Cold Steel used to run in all their knives, although it does raise the price.

I have used this Broken Skull as an EDC knife, and in that capacity I have opened and broken down many boxes, performed some light food prep, and and have worked with it a fair bit in my back yard. I have found the Broken Skull to be a good slicer. Both the grind and profile are thin and the knife zips through boxes, slices fruit easily, and bites deeply into green wood. The DLC coating has held up excellently with little in the way of visible wear.

This is a useful blade shape with good geometry for slicing, and Cold Steel’s recent switch to CTS-XHP steel with a DLC coating is a significant upgrade over their AUS-8 and teflon coated blades of yore. While the long profile lends the knife to penetrating cuts, you can still get plenty of chores done with the Broken Skull.

Handle, Ergonomics, and Pocket Clip

Much like the American Lawman, the Broken Skull has a linerless G-10 handle with a black aluminum backspacer. What sets the Broken Skull apart is how thin the G10 is. It makes for a slim knife, but the handle is still strong with zero flex in it.

Handle construction is of high quality with counter sunk button screws, chamferred G-10, and all black hardware. Cold Steel offers this model in a variety of handle colors – a nice bonus. The blue version happened to catch my eye but they have everything from standard black to pink.

The long simple handle of the the Broken Skull provides you with plenty of ergonomic options. You can choke up on the knife and make use of the simple jimping on the spine of the G10, or you can pull back on the handle and avail yourself of almost 8″ of reach. Either way the knife feels comfortable and secure. The texture of the G10 is relatively mild compared to knives like the American Lawman and Emerson’s offerings. Still, there is plenty of grip here and I don’t think anyone will mistake this for a slippery knife.

Cold Steel provides you with 2 pocket clips – one for left hand carry and one for right hand carry. The clip is short and strong, and is oriented for deep carry. The combination of the G10 and strong clip make this knife something of a chore to extract and remove from your pocket. It will also shred your pants pockets if you aren’t careful. I’m not wild about the clip for this reason. Too tight, and difficult to use.

On the flip side, the clip is discrete and it is highly unlikely that the Broken Skull will ever work its way out of the pocket. Because this knife is thin and light it carries well despite being over 5.25″ long when closed.

Deployment and Lockup

Like most of Cold Steel’s folding knife offerings, the Broken Skull comes with their asymmetrical slotted thumb studs. They work to manipulate the blade open, but this is not a knife you will be able to flick open easily thanks to the strong backspring. It’s best to roll the blade open with your thumb. The action is smooth thanks in part to phosphor bronze washers, and once you get past the halfway point, the knife snaps open.

For lockup we have the Tri-Ad lock. The Tri-Ad lock has become a staple for Cold Steel, and for good reason. It’s simple, strong, and secure. There is no blade play on my knife, despite it lacking any sort of metal liners, and the G10 being relatively thin. This is even when I try to wiggle the blade from the very tip – quite a feat considering the long blade. Construction is solid and the Tri-Ad lock is robust.

Blade centering is almost perfect on my knife.

Cold Steel Broken Skull Review – Final Thoughts

Nice pocket knife. Dumb name. That is how I feel about the Broken Skull. For normal EDC use the Broken Skull is going to be excessively long, and that is probably my biggest hangup with the knife. But I think people who enjoy carrying a long and slim folding knife will find a lot to like here for around $75. The materials are premium. Construction is simple yet functional. I even like how you have a choice of color for the handles. The Broken Skull is an efficient tool and even with a silly name I can’t help but like it for what it is.

If I could make changes, I find the clip to be too small and stiff, and I’d like to see them offer this knife in a smaller size, but I think the Broken Skull compliments Cold Steel’s catalog. They have plenty of 3-3.5″ folders. This model is a little different and that is not a bad thing.

I recommend the Broken Skull to those seeking a long slim folding knife or fans of the design.

Broken Skull IV (Blue)

Product Type: Knife
Package Dimensions: 2.032 L x 4.826 W x 13.97 H (centimeters)
Country of Origin: Taiwan, Province Of China
Package Weight: 0.022 kilograms

I recommend buying the Broken Skull at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Kudu Review

by Chad McBroom 6 Comments

Last Updated: August 3, 2019
There is a knife in South Africa known as the Okapi. Originally produced in Germany in the early 1900s for export to the German colonies in Africa, the trademark and tooling was purchased by All Round Tooling (aka Okapi South Africa) in 1988 and all production moved to South Africa. Made from high carbon or stainless steel, the Okapi is known as a workman’s knife due to its price and availability. For the same reasons, the Okapi is quite popular with the criminal element in South Africa.

Buy the Cold Steel Kudu at BladeHQ.

Buy on Amazon

The fighting systems of various peoples are always influenced by external factors. (I discuss this in detail in my book, Solving the Enigma: Insights into Fighting Models if you would really like to delve into this topic.) One of those influencing factors is weapon technology. The defects in the Okapi can be seen through the Cape Knife Fighting methods used by the criminal element of South Africa.

The Okapi has an unreliable ring-lock locking system and a dull blade that refuses to take or hold much of an edge. As a result, the knife is used in a reverse grip with the edge facing inward. Holding the knife edge inward ensures that in the event the lock fails, the blade will not collapse onto the user’s fingers. The blade is used to deliver ripping stabs since slashing and cutting strokes are rather ineffective.

Lynn Thompson of Cold Steel has a reputation for taking historical weapon and blade designs and reworking them with modern materials and Cold Steel technology to turn them into fully functional and virtually indestructible renditions of their ancestors. That is exactly what Cold Steel did with the Kudu, their reconstruction of the classic Okapi.

General Dimensions and Blade Details

The flat ground Kudu blade is constructed out of German 4116 Stainless Steel. Unlike the Okapi, the 4 ¼” blade of the Kudu is razor sharp right out of the box. The blade is thin in the tradition of the original Okapi, measuring at only two millimeters thick, and has an image of a kudu (a species of South African antelope) printed on the blade. The blade is most likely stamped out and then ground in the fashion of many Swiss Army Knives, rather than CNC machined, which gives it a little bit of a third-world feel to it. The blade is perfectly centered, but there is a bit of side-to-side play which is most likely due to the type of spacers used.

The entire knife is a whopping 10 inches long—not a small knife by any means. Lynn Thompson likes big folding knives and it shows that he did not take any exception with the Kudu. This knife is surprisingly light, however. At only 2.4 ounces, this knife feels like a feather in the hand.

The clip point blade of the Kudu is extremely sharp out of the box. I did some quick paper cutting tests with it and it performed superbly. Not having a lot of experience with Krupp 4116, I had to do a little research on this particular steel’s properties. Although all of the Internet commandos have their own opinions, but as far as metallurgy is concerned, 4116 is a modified form of 420C and is said to be on par with 440C for edge retention characteristics, but has a better corrosion resistance than 440C. So far, I would have to say that the Kudu’s edge retention has been pretty close to most of my 440C blades.

Handle, Ergonomics, and Carry

The curved handle of the Kudu is made from what appears to be two pieces of black zytel (Zy-Ex) fused together to form one piece. With the exception of the pivot pin, all of the handle hardware is external. The handle has a decorative metal kudu horn inlaid into the left side and a wood grain texture.

The faux wood grain texture on the handle adds to both the appearance and grip of the handle. The lack of any type of finger grooves means you can extend or choke up on the grip without any discomfort; however, with the absence of any kind of guard or quillon, this is not a knife that you would want to use for stabbing.

The Kudu does not have any type of pocket clip to facilitate carrying (Man, have we gotten spoiled or what?). The handle of the Kudu is so long that it actually carries fairly well in the back pocket of a pair of jeans, or in the front pocket along the seam. For an average size person, the ring will actually rest at the top of the pocket. Allowing the ring to sit just outside the pocket will put the knife within easy access.

I performed some testing on the locking mechanism to see just how reliable it is. I gave it five solid spine whacks and five radius hits just below the tang. The blade remained solidly locked with no signs of compromise. I have no doubt the ring-lock on this knife is solid and dependable.

Deployment and Lockup

Kudu deployment requires two-handed opening using the thumbnail groove on the blade. Like the Okapi, the Kudu has a ring-lock, but one that actually works. For those who may not be familiar with this type of locking mechanism, a ring-lock is similar to a back-lock in function, except instead of pressing down on the back of the locking bar (rocker bar) to release the lock, you pull up on a ring near the front of the locking bar. Also, with a lock-back, the locking bar is inside the frame and fits into a cutout in the tang and locks the blade, whereas with a ring-lock, the locking bar is external and has a cutout that a notch in the tang fits into to lock the blade. Of course, this type of ring-lock system is completely different from the ring-lock system used by Opinel Knives, which involves rotating the bolster.

The lockup on the Kudu is quite strong. It takes some effort to disengage the locking bar. Again, for those not familiar with a ring-lock, there is some technique involved in closing this knife. Failure to use the proper technique could wind you up in the emergency room having your fingers stitched back together. To close the Kudu, you place your index finger through the ring and brace your thumb against the spine of the blade, then pull the ring and push against the blade. The tang of the Kudu has several notches that act as safety stops to prevent the blade from closing too quickly, but it is still important to keep your fingers clear of the blade’s path.

There are some techniques for modifying the Kudu to open and close a little smoother, but I will not discuss them here since this is done at the cost of some of the knife’s locking integrity. An interesting side note on deployment is that South African gang members will carry the Okapi partially open in the back pocket so that when it is pulled out by the handle, the tip of the blade catches on the seam, in the fashion of an Emerson Wave, and opens the blade. This works because of the dull blade and weak spring of the Okapi. If you tried this with the Kudu, you would end up with a partially opened knife and half of a back pocket.

Cold Steel Kudu Review – Final Thoughts

The Cold Steel Kudu is not a high-end tactical knife by any stretch of the imagination. It is well designed and well built, but it does feel cheap—because it is cheap. The Kudu retails for $9.99, but can usually be picked up for about $6.00. For a utility knife that can be used in the kitchen or thrown in the bottom of a tackle box, the Kudu is hard to beat on price alone. It blows away any knife you might buy at your local retailer for even double its retail price.

I typically carry high-quality, hard-use tactical knives on a daily basis since my primary purpose for an EDC knife is self-protection. With that being said, the Kudu will definitely not become my new EDC knife as it is neither designed to be nor intended to be a tactical knife, but I will definitely be throwing one in my utility drawer and probably one for a spare blade in my bug-out bag.

Cold Steel 20K Ring Lock Folding Knife

Kudu features a highly rust resistant and beautifully mirror polished stainless steel blade
handle is made from durable glass-reinforced Zy-Ex and has an attractive wood grain texture
The Kudu is amazingly lightweight, versatile and functional
The blade is 4-1/4-inch Overall dimensions 10", 2MM thick. Weights 2.4 oz.
For safety, the Kudu¿ has been thoroughly. The locking mechanism will hold the blade rigidly

I recommend purchasing the Cold Steel Kudu at Amazon or BladeHQ. Thanks for reading.

Cold Steel Pro-Lite Review

by Benjamin Schwartz 10 Comments

I was excited when Cold Steel announced the Pro-Lite. I like good knives, and I like cheap knives, and the Pro-Lite looked like it might check both boxes. And while there’s definitely a lot to say about Cold Steel’s behavior in the last few years, it’s nice to see a genuinely interesting budget knife from a company other than Kershaw.

Buy the Cold Steel Pro Lite at BladeHQ

Buy on Amazon

People talk about the Hinderer/KAI collaborations a lot but, really, the partnership between Cold Steel and Demko is where it’s at. Cold Steel’s affordability, competent machining, and quality materials complement the utility-driven Demko style perfectly. This harmonious pairing has allowed Cold Steel to first reinvent itself as a maker of reliable tools and not just oversized Mall Ninja props, and to move upmarket with compelling offerings in the mid-priced knife bracket.

That move meant there wasn’t really an entry-level Cold Steel knife anymore. Sure, there were a few cheap knives in the lineup, but they were all a little too corner case or niche to be representative of the brand. With the Pro-Lite, Cold Steel brings out a true modern CS design, at a low price. This is the Cold Steel budget flagship we were waiting for.

General Dimensions and Blade Details

The Pro-Lite has a blade length of 3 5/16”, a handle length of 4 ½”, and an overall length of almost exactly 8”. It is very light for its size, weighing only 3.2 oz, and is made in Taiwan.

Andrew Demko’s style is particularly adaptable to production knives. I think this is because his design philosophy is so practical. His blades are stylish, but that style derives from a commitment to utility. Every custom maker I’ve ever spoken to says they want their knives to be used, but few make this as obvious as Demko does. It also helps that his signature design element, the Tri-Ad Lock, is easy to implement in production knives.

Generally, I prefer smaller knives. I’ve been trying to carry more larger knives to get a feel for the advantages they offer. For what it’s worth, I think the Pro-Lite’s size is part of its charm. This wouldn’t work as a smaller knife. The incredible ergonomics would be compromised, and the very nice blade shape would be altered, likely for the worse.

My Pro-Lite has a clip point blade, long and low-slung, similar to the Buck 110’s blade. I think I’m still a drop point boy at heart, but the clip point is growing on me. The Pro-Lite’s tip is just south of the pivot, and the blade is ground thin enough that you get a lot of a control. The hollow grind starts fairly low, but given the thinnish initial stock you have a good combination of sliciness and stability. This is a burly blade I can get behind.

Steel is interesting. As much as I would have loved to see Cold Steel’s erstwhile standby, AUS-8A, on the Pro-Lite, what we have instead is Krupps 4116. A less common steel, seen on a few of Cold Steel’s previous super-budget options like the Pocket Bushman. I’ve never had a knife with 4116 before, and my experience with it on the Pro-Lite has left me ambivalent. Edge retention seems to be below AUS-8A, and while it is rust-resistant, it has a splotchy finish that just looks weird. Even in the glamour pics on retail sites it looks bad. In the end though 4116 is serviceable and easy to sharpen, which is tantamount in an ‘everyman’ blade, as the Pro-Lite is designed to be.

Handle, Ergonomics, and Carry

Word on the street is that Andrew Demko was particularly fond of the Pro-Lite’s handle, and he has every reason to be. The ergos here are excellent. The bi-level sculpting puts your fore- and middle finger at a lower level than your ring finger and pinky, letting you pinch around the pivot for superlative control. The guard is pronounced enough to keep your hand from going forward, but shallow enough not to interfere with cutting. The beak at the back keeps your rear two fingers situated. This is one of the nimblest-feeling medium-sized blades I’ve ever handled.

Other nice things: there is a slight contour to the scales. The orange peel finish is positive-feeling, but not Cold Steel Classic abrasive. The extra-large jimping on the spine of the knife is great for indexing. Overall proportions for a medium-sized knife are spot on. The Pro-Lite feels hardy and dependable without feeling comically overbuilt, and it has a rugged, Jean Claude Van Dammian swagger that some of the more cerebral heavy-duty knives lack.

The Pro-Lite is a little wide in the pocket, but it’s nothing catastrophic. At its widest point it’s still narrower than a PM2, and it’s nice and thin compared to something like a Voyager. I also heartily approve of the clip. Angled clips are one of my pet peeves, and I’m hoping that Cold Steel is moving towards straight, unadorned clips like this one in the future. Tension is perfect, length is just right, and it seems durable. I have no complaints here. It may not be a revelation in the pocket as it was in the hand, but the Pro-Lite still carries damn good.

Deployment and Lockup

Cold Steel cheaped out big time on the washers: big plastic affairs. The pivot feels cottony, and deployment is very slow. A lockback isn’t ever going to be the fastest opener in the world, but these cheap washers really gunk it up. Once the knife is broken in they’re serviceable, and I can just about flick it open now, but really, phosphor bronze washers would be perfect here, and even at $30 that isn’t asking for the moon.

The Tri-Ad lock is here, and completely serviceable. I get the slightest amount of vertical play if I really wrench on the Pro-Lite, but it’s nothing to get upset about. For a working knife, the Tri-Ad lock is such a good choice. It’s dead simple to operate, requires no real maintenance, and is as unfinicky as they come. Worth noting, however, is that there are degrees of quality in Tri-Ad locks. This is a workmanlike variation, less tuned than the one on my Large Espada. If I flick open the Pro-Lite really hard the lockbar travels deeper into the notch on the tang and it takes some doing to unstick it. It doesn’t feel as dialed in as on a higher-end offering, but I don’t think it affects performance in the least.

Cold Steel Pro-Lite Review – Final Thoughts

The Pro-Lite makes a lot of sense for Cold Steel 2016: when most of their line was in the $40-60 range, they would undercut themselves with something like this. Now that they’ve moved upmarket, they can introduce a blade for somebody interested in their design ethos and the Tri-Ad lock, but without the money to spend on higher-end options. And, in the budget knife world, I think the Pro-Lite can compete with the all-time greats in the price bracket: the Drifter, the Tenacious, the Cryo.

If they made a Pro-Lite with contoured G-10 scales, CTS-XHP steel, and tighter fit and finish, I would gladly pay $120 for it. And you can’t always say that you’d be interested in higher-end versions of budget knives. A Drifter wouldn’t be all that interesting against more the diverse competition in the high-end market. It’s too generic. The Tenacious fails to impress next to the Native 5, or even the Delica. But I like the Pro-Lite design better than the Voyager or the Recon 1.

There is no dearth of cheap knives in the world, but there are precious few that we will remember in five years. There are budget knives that are good budget knives, and budget knives that are good knives. The Pro-Lite falls into this second, much smaller category. This is a great design, full stop. It is quite an accomplishment, and even amongst the string of great knives Cold Steel has been releasing, it stands out. Its own flaws can’t stop the design from shining through either. For $30 this is an easy, easy recommendation.

Cold Steel Pro Lite 3.5" 4116SS Clip Point Razor-Sharp Blade 4.5" GFN Handle Everyday Carry Pocket Folding Knife w/Tri-Ad Lock

PRO LITE CLIP POINT FOLDER - The Cold Steel Pro Lite heavy-duty folding knife aims to deliver superior strength and durability; Sporting a clip-point blade shape, the Pro Lite offers a thin, sharp tip, enhancing its piercing capabilities and precision
4116 STEEL BLADE - This Pro Lite folder features a resilient 3.5-inch blade crafted from 4116 stainless steel; Renowned for its toughness and ease of sharpening, 4116 steel ensures reliable cutting performance in various everyday scenarios
GFN HANDLE - The Pro Lite folders feature handles made from Glass-Filled Nylon (GFN), a durable and high-quality material that provides a secure grip and comfortable handling; GFN offers reliable performance, enhancing handling and control
TRI-AD LOCK - Equipped with Cold Steel's renowned Tri-Ad locking mechanism, the Pro Lite folding knife offers unparalleled strength and shock resistance; This locking mechanism enhances the knife's reliability and safety during heavy-duty tasks
SPECS - Weight: 3.3 oz (93.6 g); Blade Thickness: 3 mm; Blade Length: 3.5"; Blade Steel: 4116 Stainless Steel; Handle Length/Material: 4.5" GFN; Overall Length: 8"; Knife Type: Folder; Blade Shape: Clip Point; Locking Mechanism: Tri-Ad Locking Mechanism

Editor’s Note: I recommend purchasing the Cold Steel Pro Lite at Amazon or BladeHQ. Please consider that by purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Cold Steel Code 4 Review

by Dan Jackson 5 Comments

I have slowly worked my way through most of Cold Steel’s standard folders. I have reviewed the Voyager series, the Recon 1s, the American Lawman (probably my favorite), and even some of their more colorful offerings like the Spartan and Rajah III.

Buy the Cold Steel Code 4 at BladeHQ

Buy on Amazon

For some reason it has taken me a while to get to the Code 4 line of knives. The Code 4 series is different because they come with slim aluminum handles rather than G10 or plastic. Cold Steel advertises this as a police officer’s duty knife. Apparently a “Code 4” is police radio code for “No further assistance necessary”. Heady stuff.

At any rate, the knife is supposed to be light, slim, and tough. Functional yet easy to carry. That all sounds good to me. And once Cold Steel announced that they would upgrade the Code 4 to CTS-XHP I knew that I needed to make this model a priority. Soon enough I had one at my doorstep for review.

General Dimensions and Blade Steel

The Code 4 has an overall length of 8.5″, a 3.5″ blade, weighs 4.3 ounces, and is made in Taiwan. While it’s no Large Espada, this is still a big knife. Too big for me to EDC at the office, but certainly a good choice for the weekends or working in settings where a larger knife is appropriate. I can see where the Code 4 might make sense for a first responder or military member.

It is also worth mentioning that this is another clean and functional Andrew Demko design for Cold Steel. I have become a big Demko fan over the years, and think he has contributed a lot of great designs to the company.

Cold Steel offers the Code 4 in 3 different blade shapes: clip point, spear point (shown here), and tanto. I settled on the spear point because I think it is the most utilitarian looking of the 3, and I used my Code 4 as an EDC and work knife.

Cold Steel also offers the Code-4 with either a plain edge or partially serrated edge. I prefer plain edges, especially if the knife is coming in a high end steel like CTS-XHP. Plain edges are easier for me to maintain and a quality steel like CTS-XHP will hold a good edge for a long time. No need for serrations for what I need to do, but that comes down to personal preference.

My knife came with a high hollow grind and a swedge (top false edge). The blade has been given an attractive 2 tone satin finish. It has held up well under normal use.

The big draw to this new version of the Code-4 is that it comes with CTS-XHP blade steel. CTS-XHP is a high end steel from Carpenter. I have a good amount of experience with CTS-XHP at this point, and I think it’s a good steel. Offhand, I would compare it with something like CPM-154.

The CTS-XHP blade steel on my knife came with an aggressive edge. The knife attacked cardboard, rope, and wood. The blade is a little over 3mm thick, but has no problem cleanly slicing apples and paper. Edge retention has been excellent. CTS-XHP is a significant upgrade over the old AUS-8 blade, but also comes at a significant bump up in cost (it seems to be anywhere from 50%-75% over the old Aus 8 version, depending on where you shop). CTS-XHP is also easy to sharpen. I think that it is an all around smart choice for a working knife.

Handle, Ergonomics, and Pocket Clip

The Code 4’s handle is aluminum handle slabs with stainless steel hardware, a stainless steel lock bar, and an aluminum backspacer. While the handle slabs are a raw bead blasted gray, it is interesting to note that the backspacer is actually anodized golden brown. The end result is a handle that is simple, thin, and elegant.

The handle is also beautifully finished. The edges are all gently chamfered, the hardware is all perfectly inset. This is an immaculate knife. This is also a strong knife. With full metal construction I would wager that the Code 4 is one of Cold Steel’s stronger folding knives.

The ergonomics of the Code 4 is perhaps the knife’s biggest caveat. The design is fine, with a generous handle, 2 finger grooves and a slight thumb ramp, but because the knife is so thin I found the Code-4 uncomfortable to use for more than a minute or so without gloves. It is fine if you are going to open up a box or do some light foodprep, but if you plan on breaking down a bunch of cardboard or working on some serious carving you are going to want some gloves. The thin handle is great in the pocket, but bites into your hand.

Depending on how you intend to use the knife, this may or may not be a problem. For those that are wanting a self defense blade, this may not be an issue. But if you work at a warehouse and break down boxes for a living, I would go for a knife with a thicker handle, like a Large Voyager or Recon 1.

Although the Code 4 may not be the most comfortable knife in hand, it feels great in your pocket. It’s slim and discrete, and is likely ideal for someone like a police officer who carries a lot of gear and doesn’t have room for a massive pocket knife. At 4.3 ounces the knife is lightweight relative to its size and strength.

Cold Steel drilled and tapped the handle for tip up ambidextrous carry, and included 2 pocket clips for the knife. The pocket clips are simple steel clips, have good spring retention, and they work well. One nice thing about the lightly textured aluminum handle is that it does not tear up your pants like peel-ply G10.

Deployment and Lockup

The Code 4 comes with ambidextrous thumb studs. This is more like one and a half thumb studs, just like on the the American Lawman. The thumb stud is reversible with a flat head driver. There are phosphor bronze washers inside the handle, and the blade opens smoothly, and without too much effort. With that said, there is still a hefty backspring to overcome. This is not an easy knife to flick open. It can be done with practice, but won’t be a knife that you mindlessly flick open all day long.

The Code-4 comes equipped with Cold Steel’s infamous Tri-Ad lock. For the uninitiated, this is a lockback reinforced with a stop pin. Cold Steel has come under scrutiny lately over a gauche series of videos “comparing” the Tri-Ad lock to other locks on the market (where the Tri-Ad lock comes ahead by a wide margin). I am not sure what the value of these tests are when you consider the real world applications of a pocket knife, but it certainly has people talking.

Like all of the other Tri-Ad lock knives I have reviewed, this is a strong locking folder. There is not a suggestion of play in any direction on my knife. The lock is also reasonably to disengage, and doing so won’t kill your thumb. I am a fan of the Tri-Ad lock, and it is well executed here.

Blade centering is perfect on my example.

Cold Steel Code-4 – Final Thoughts

I am not sure why it took me so long to examine the Code-4, but I am glad I waited for the CTS-XHP version to come out. While the Code-4 is similar to knives like the Recon-1, the choice of aluminum for the handles over G-10 results in several important functional differences. The knife is super slim and easy to carry. I like that aspect of the Code-4 a lot.

What I am less enthused about is how the thin handle quickly becomes uncomfortable if you try to use the Code-4 for an extended cutting session. Gloves mitigate this somewhat, but this is an important point to mention. So often you hear reviewers (myself included) done on about how important it is for a pocket knife to be slim and light for easy carry. I still largely agree with that, but it’s important to understand that sometimes slimness has a price. In this case that price is comfort in hand. For that reason the American Lawman and Ultimate Hunter (both shown above) with their G10 handles won’t be leaving my collection any time soon.

I still think the Code-4 is an excellent tool and I intend to keep it in my collection. It’s like an upgraded Boker Titan Drop. If you primarily carry it for light utility and perhaps self defense (eg, as a police officer might carry it), then I think there is a lot going for the Code-4. It’s strong, intelligently designed, and nicely made. This is a no-nonsense tool, and I have no doubt that it will hold up for a long long time.

I recommend the Code 4 if you are seeking a long, slim, and strong daily carry folder, and don’t mind donning gloves for longer cutting chores.

Cold Steel Code 4 Spear Point Folding Knife

Made of highest quality material
Manufacturer: Cold Steel
Cold Steel Code 4 spear point plain edge 3.5in folding knife

I recommend purchasing the Cold Steel Code-4 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Large Espada Review

by Benjamin Schwartz 12 Comments

Last Updated: July 28, 2019
Although knife collecting, like any hobby, is a mild form of mania, I like to think that within this gentle madness I am a reasonable man. My uses for my tools are reasonable. My knife preferences are reasonable: I prefer simple handles, simple blades, and I generally like those blades at 3” or less. No one could look at my collection of knives and think me anything but a very reasonable individual – unless their eyes by chance fell on my Cold Steel Large Espada.

Buy the Cold Steel Espada at BladeHQ

Buy on Amazon

How did I end up with such a ludicrous knife? Well, even though most of my purchases come after much consideration, reading, and weighing of pros and cons, every so often I like to impulse-purchase a knife that is out of my comfort zone, just to counterbalance the homogeneity in my collection that my preferences tends to create. But when I ordered the Large Espada late one night, I wasn’t just stepping out of my comfort zone; I was taking a flight to a location on the other side of the planet.

No knife I can think of offhand (outside of some particularly egregious customs) so flamboyantly violates every edict of utility I’ve set for myself over the years like the Large Espada does. But, going beyond that, I don’t think that it’s a practical choice even for the applications for which it was ostensibly designed. The Large Espada is impractical. It is unreasonable.

So this is going to be an odd review: an unreasonable knife reviewed by a reasonable man. But I like to imagine that even the palest, milquetoastiest accountant likes to cut lose once in a while. Sometimes you want to listen to Electric Wizard, not Glenn Gould. Sometimes you want to carry a giant, unwieldy tactical blade instead of a reasonable and non-threatening tool. And when those sometimes strike you, there aren’t many knives I know of that can scratch that itch quite like the Large Espada.

General Dimensions and Blade Details

The Large Espada has a blade length of 5 ½”, a handle length of 7 1/8”, and an overall length of 12 1/2”. It weighs 9.8 oz. – almost as much as four Benchmade 940-1s. The Espada is made in Taiwan.

Of course, when you’re dealing with a knife of this size, it doesn’t make sense to get hung up on weight – after all, the 5 ½” blade folding knife isn’t exactly a crowded category, is it? Even very big knives like the Benchmade 710 or some of the Hogue knives aren’t really in the same size class. The only other reasonable competition for the Large Espada is the more affordable, all G-10 Large Espada, which weighs about 1 ½ oz. less.

The Large Espada’s blade is a dramatic, theatrical, aggressive clip point. The tip is somewhat strengthened by the swedge, and will pierce material, even thick material, quite easily, but it gives the impression of relative delicacy. The edge is all belly, dipping out right after the ricasso. This, coupled with the (excellent) hollow grind and the wide edge bevel, give the Large Espada considerable cutting ability, at least on the macro level: cardboard, wood, plastic, metal, all can be separated cleanly and easily by this monster.

Cleanly and effortlessly for a while, at least. The steel, AUS 8A, simply wasn’t the right choice here. If you want to use your Large Espada in roles other than self-defense, you’re going to use it for the macro cutting tasks I mentioned above, and when you do, you’ll find that AUS 8A dulls quickly. Editor’s note: in 2015 Cold Steel finally upgraded these to CTS-XHP steel, and then to S35VN. I have had some experience with Cold Steel’s CTS-XHP and their S35VN and both steels have been excellent. S35VN is a meaningful upgrade over AUS-8A. It holds an edge better and is tougher. It’s a better choice all around.

I could deal with poor edge retention if it were the only problem, but, on this blade shape, with this grind, the steel is also fragile. When I first got my Large Espada a couple years ago, I took it out on the patio to cut up some water bottles, cardboard, and boxes of frozen peas (yup), both to test it and to participate in the time-honored tradition of goofing around with a knife (what are the Absolute Proof videos if not footage of people goofing around with knives?). During one cut I happened swing down and hit the balustrade – not hard enough to bite into the wood, even, but when I looked at the blade I saw that it had chipped, in multiple places and quite badly:

I’ve sharpened the Large Espada since then, and managed to reduce the chipping a bit, but it’s still visible, and I don’t think I was abusing the knife when it happened. I think it comes down to that wide edge bevel; AUS 8A isn’t tough enough to be run that thin at the edge. I understand that in the self-defense role, such issues are less likely to matter, but I still think that Cold Steel could, and should, have chosen a better blade steel than AUS 8A. Let us not forget that we’re talking about a $130 knife here.

Handle, Ergonomics, and Carry

The Large Espada’s handle is comfortable no matter which way you hold it: forward, with your index finger in the choil, or in a pistol grip with the lower scalloping between your middle and ring fingers, reverse grip: it’s all good.

The handle is composed of two parts, almost in the style of a traditional knife: the aluminum ‘bolsters,’ which are integrated with the liners and the sort of grommet at the end of the knife, and the polished G-10 scales or inserts. Everything is decently if not artfully contoured, and all the edges are chamfered. I feel like a good portion of that comfort would be lost on the pure G-10 models: Cold Steel’s traditional unpolished G-10 is famously aggressive, and I don’t like it at all. It ruins your pockets, makes the knife uncomfortable to hold, and, let’s face it, looks a hell of a lot less classy than the original Espada’s set-up. If you’re going to get the Large Espada, get the original set-up. It is very comfortable in hand.

In the pocket? Not so much. I can fit the Large Espada into the pocket of my jeans, but just barely, and even though it doesn’t feel as heavy as I was expecting, it sure doesn’t disappear. And this is where I take issue with the Large Espada in its intended role as a self-defense tool: issues of legality aside, it’s almost too big to carry around every day, even as a dedicated tactical blade, to use the Nutfancian term. I know a lot of smart guys who carry multiple blades, but I am a one-knife man, and I don’t have enough pocket space for a second knife of any size, let alone something as elephantine as the Large Espada.

Maybe I’m doing it wrong, though; Tool carries his in in a kydex boot sheath. Might be worth looking into.

Deployment and Lockup

More problems arise with the deployment methods on the Large Espada. There are two, although they both utilize the thumb plate on the spine of the blade. The first method is your traditional roll/flick open. Either is difficult to do reliably or quickly because of the size of the Large Espada. Rolling it out requires your thumb to stretch quite a bit, so it isn’t comfortable or fast. Flicking it takes a lot of wrist momentum, as well as careful placement of your thumb on the plate.

The disk is also designed to be wave deployed; that is, you can draw the Large Espada from your pocket in such a manner as to cause the plate to catch on the corner of your pocket, deploying the blade as you pull it out. Wave openers, to me, aren’t handy enough to compensate for the awkward stares and for the accidental half-openings that can occur, but this one is particularly finicky.

In my last review I wrote that every big blade I’ve had has some bladeplay. I guess I have to eat a little crow because that isn’t true: I had forgotten that my Large Espada has none, whatsoever, in any direction. It did when I first got it, but earlier this year I took it apart, cleaned everything, and put it back together a little tighter, and it was totally gone.

The Tri-Ad Lock truly deserves every accolade thrown its way. As ambidextrous as the Axis Lock, but with less moving parts, and tougher than a frame lock, it is a marvel. A weak lock on a knife this big would be an absolute disaster, but with the Tri-Ad Lock in place I have absolute confidence that my Large Espada will only close when I want it to.

Cold Steel Large Espada Review – Final Thoughts

So I’ve spent 1,500 hundred words enumerating all the ways in which the Large Espada is an impractical purchase. It’s huge, the steel is iffy, it’s huge, the design is aggressive and off-putting to those around you, the deployment methods are a bit of a pain, and it’s huge. I never carry blades for reasons of self-defense. I don’t think it’s a silly thing to do, but it’s just not something I’m interested in doing. However, even carried as a self-defense knife, I think there are better options out there than the Large Espada; even in that role it is impractical.

But, hey (and turn up the metal for this next bit), sometimes you just want a huge, badass knife. Something for the collection, something that looks rad, is made well, and never fails to make you smile (maybe a little self-consciously), when you take it out to show somebody, thwacking it open and watching their eyes go wide.

I bought the Large Espada on a impulse. It wasn’t cheap. I hardly carry it. I usually only take it out every couple of months, and even then just for a few minutes. I forget that I own it for months at a time. It’s ludicrous. It’s impractical. It’s unreasonable.

I’ve never regretted buying it.

Cold Steel Espada with Polished G10 Handle, Large

Blade Length: 5-1/2"
Handle: 6-3/4" Long, Polished G-10 with Polished 7075 Aluminum Bolster and Frame
Steel: Japanese AUS 8A stainless
Blade Thick: 4 MM
Overall Length: 12-1/4"

I recommend purchasing the Cold Steel Espada at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Ultimate Hunter Review

by Dan Jackson 34 Comments

You won’t find too many hunting knife reviews on this website. The reason is because I am not much of a hunter. But despite being advertised as a hunting knife, there was something intriguing about the Cold Steel Ultimate Hunter that made me buy the knife.

Buy the Cold Steel Ultimate Hunter at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00U1I9OUS” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

Designed by Andrew Demko, this is one of the new Cold Steel offerings to feature CTS-XHP steel. Andrew has made a name for himself by bucking the trend of dialed in titanium frame lock flippers, and instead designing simple robust folding knives featuring his tri-ad lock, which is a modified back lock. Back locks (or lock backs) rank among the oldest types of locks for a folding knife. This is another utilitarian pattern from Andrew, but the inclusion of contoured G-10 handle scales the Ultimate Hunter make it one of Cold Steel’s most refined releases to date.

General Dimensions and Blade Details

The Ultimate Hunter has an overall length of 8.5″, a 3.5″ blade, weighs 4.9 ounces, and is made in Taiwan. This is a larger knife, but feels lightweight for its size. I have shied away from larger knives for every day carry (EDC) as of late, but the Ultimate Hunter has found a way to win me over and has been getting a lot of pocket time – especially on the weekends when I can get away with carrying a bigger blade. Some might scoff at the blade to handle ratio. I never bothered to measure, as the blade to handle ratio has never struck me as a useful metric for evaluating a knife, but for those who do care I will note that the blade is noticeably smaller than the handle. This is a working knife, and in my opinion a generous handle is welcome on a knife that you are going to be using seriously. Although I don’t hunt I have caught my fair share of fish and do a lot of cooking. Based on my experiences using knives while fishing and cooking I can at least speculate to the benefit of a larger handle when processing game.

The blade of the Ultimate Hunter is a simple drop point. It isn’t the sexiest blade shape, but it certainly works. The generous piece of CTS XHP steel has been given a high flat grind with a two-tone satin finish. It’s a lovely blade finish and is a great upgrade over a coated or bead blasted finish. The tip is capable, but not overly aggressive. It would probably serve well skinning and breaking down game without a huge risk of puncturing organs, but that is just conjecture on my part. It slices well and has done a tremendous job breaking down a number of commercial grade cardboard boxes, and I have used the knife to de-bone several chickens for roasting.

Arguably the biggest allure to the Ultimate Hunter is the inclusion of CTS-XHP stainless steel for the blade. It is almost impossible to read or watch a review of a Cold Steel folding knife in AUS-8 where the reviewer doesn’t bemoan the AUS-8 blade steel at some point in the review. I have become comfortable with AUS-8 over the years, and actually like it in inexpensive (sub ~$50) knives. That said I think CTS-XHP is a great choice, and an upgrade of the steel on Cold Steel’s folders is long overdue. I am very excited to see CTS-XHP on this knife.

Out of the box the Ultimate Hunter was screaming sharp. It annihilated cardboard. There is a strand of bamboo along the back fence in my yard, and after a South Florida storm 6 foot tall bamboo shoots will seemingly pop up overnight. Without judicious pruning the bamboo overtakes the entire yard. The Ultimate Hunter has proven itself to be very capable on “bamboo patrol” – gliding through 1″ thick shoots – and allows me to channel my inner Lynn Thompson. Edge retention has been good, but like any steel CTS-XHP will need touch ups and the occasional sharpening. So far I have just stropped and touched up the knife with the fine rods of my Sharpmaker. It is very easy to sharpen. This is a good upgrade over AUS-8, and I have been pleased with the performance of this blade.

Handle, Ergonomics, and Pocket Clip

The Ultimate Hunter features a linerless G10 handle with a stainless steel lock bar, black aluminum backspacer, and stainless steel fasteners. The G10 is 3-D contoured, nicely finished, and has an attractive “grain” to it. Despite the absence of metal liners, handle construction is very strong. The G10 is thick and there is absolutely no flex in the handle. All of the pieces line up nicely and the fit and finish is very good.

The Ultimate Hunter feels great in hand. The handle shape is very simple and easy to grasp. There is a small forward finger choil, and 2 “finger divots” towards the pivot. This divot catches your index or middle finger naturally when using the knife (it depends on whether you are choking up or not). The G10 appears to have been bead blasted, so it’s smooth, but not slippery. It still has a nice texture to it, but is nothing like the peel ply G10 on my American Lawman. There is some very wide jimping on the spine of the handle. It provides some traction if you are choking back on the handle, but is basically not-present if you are using the knife for regular work. That’s fine by me. The pommel has a small “dish” for your thumb in reverse grip. I don’t use my knives in reverse grip very much, but it does seem to be comfortable in reverse grip.

The handle of the Ultimate Hunter is drilled and tapped for ambidextrous tip up carry, and comes with 2 shiny stainless steel pocket clips. This isn’t an ultra-deep carry set up, but allows for relatively deep carry while still affording easy access. The clip is very sturdy and retention is secure. Because the handle is smooth G10 you don’t have to worry about this knife shredding your pockets like the American Lawman, or Recon 1.

Deployment and Lockup

The Ultimate Hunter has the same “lopsided” thumb stud found on models like the American Lawman and Voyager. The thumb stud is swappable for ambidextrous use. This is a proven thumb stud design and it definitely works. The lock has a very strong spring, and this is not a knife that I can flick open – even with wrist action. It definitely requires you to purposefully roll it open. Not a huge problem for me, but if you like being able to flick open your knives then this is worth noting. Inside there appears to be phosphor bronze washers. The action is nice and smooth.

For our locking mechanism, Cold Steel has equipped the Ultimate Hunter with the tried and true Tri-Ad lock. This beefed up lockback has proven itself to me time and time again to be a very robust and reliable lock. Here it is no different. The sound this thing makes when you snap the blade open is impressive, and is sure to annoy the heck out of your significant other if you obsessively open and close your knives like I do. Like all the other Tri-Ad lock knives I have owned, there is no blade play at all. It is very secure. The caveat to this is that the knife can be tough to disengage sometimes. I can disengage the lock with one hand, but this is really a 2-hand knife.

Cold Steel Ultimate Hunter – Final Thoughts

Labeling your product as the “Ultimate” anything is a bold claim – especially in an age of false advertising litigation. Cold Steel is known for being a over the top, but here I think the moniker may actually be deserved. The Ultimate Hunter is the nicest and most refined Cold Steel folder I have reviewed to date. Cold Steel has taken all of the things I like about their knives (the slick Andrew Demko designs, good ergonomics, excellent fit and finish, and tough build), and are finally mating these qualities to superior materials. And the manufacturing has been kicked up a notch too. The 3-D machined handle is beautiful and the blade is substantial.

That said, you are going to pay a premium for all of this. The Ultimate Hunter retails for a little over $100, a little more than a what new Recon 1 or American Lawman (in CTS-XHP) goes for. For the extra money you get a stouter knife with contoured handles. I think the Ultimate Hunter represents a good value.

Of course the irony to this review is that the Ultimate Hunter is marketed as a hunting knife, and I have never been on a hunt in my life. But I have plenty of experience with hard use folding knives, and the Ultimate Hunter is an excellent rough and tumble EDC. Regardless of the nomenclature, this is the high end Cold Steel Folder we have all been waiting for. Highly recommended if you are looking for a premium large folding utility knife and can get past Cold Steel’s aggressive marketing practices.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00U1I9OUS” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

I recommend purchasing the Ultimate Hunter at Amazon or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated – thank you very much!

*Note – I have no idea why the picture is of a SOG product.