Grayson Parker

Grayson is an avid knife and gear enthusiast. He began writing for BladeReviews in 2015, and has elevated reviewing knives to an art form. He can be found on Instagram and Twitter.

Viper Dan 2 Review

by Grayson Parker 10 Comments

I have a bit of a love affair going on with slipjoint knives. Part of the reason for that is – if I may be frank – that the framelock flipper is a pretty stale form right now. Don’t get me wrong, many blades of that stripe are beautiful, functional, and deserving of praise, but they’ve taken up and held such a large portion of the market that I’ve been dying for something different. Fortunately, just as that malaise peaked, I saw that the Viper Dan 1 & 2 were available on BladeHQ. Almost immediately, I ordered a Viper Dan 2 in burgundy micarta.

Buy the Viper Dan 2 at BladeHQ

No products found.

Now I can’t pretend that the Viper Dan was a lightning bolt out of blue sky; I’d been excited about it since seeing it previewed at last year’s Blade Show. The Dan was designed by Tommaso Rumici, an Italian designer who has worked for a number of manufacturers. Andrew Gene AKA The Edge Observer said it best describing his style as a “combination of flowing organic lines and hard angles.”

The knife’s name is an acronym for Daily Assorted Needs, and the design is a reflection of that intent. This isn’t a “tactical” knife, but it is a solid working tool for everyday tasks. The Dan is one of a number of designs emerging from Europe, where knife laws are typically stricter than those in the United States, typically concerning locks. While I can’t say that I’d enjoy knife laws that restrictive, I have to admit that those limitations have spurred some unique and functional designs.

General Dimensions and Blade Details

The Viper Dan 2 measures in at 7” while open and weighs 3.2 oz., featuring a 2.875” blade housed in a 4.25” handle. The Viper Dan 1 is nearly identical, but offers a more traditional drop point blade shape. I’ve long been a fan of the modified wharncliffe as far as blade shapes are concerned; they strike a fine balance between tip strength and piercing, and the slight but continuous belly of the blade is suitable for a wide range of tasks. This iteration of the wharncliffe is executed quite well. All Viper by Tecnocut knives are (as far as I know) produced in Maniago, Italy.

Both blade shapes feature a partially flat grind. While I prefer hollow ground blades, it is refreshing to see a well-done flat grind on a blade thin enough to support it. I haven’t encountered any difficulties in cutting tasks, regardless of whether I’m using the Dan for food prep, breaking down cardboard, or just opening packages. Every aspect of the blade is meticulously ground. Even the swedge (an aspect of the grind that is easy to screw up) is symmetrical, and meets up with the rounded spine cleanly.

If you can’t tell by this point, I’m biased towards simple, working steels. N690 is certainly in that class, despite widespread use on high end production and even handmade knives. It won’t require as much care as 8Cr13MoV or Aus8a, but I do recommend regular stropping. I’ve never experienced rust or staining on any of my knives with N690. Overall, it demonstrates a great balance between ease of care, rust resistance, edge retention, and toughness.

Handle, Ergonomics, and Carry

The handle is formed of two contoured slabs of burgundy micarta over nested steel liners. When it first arrived, the color of the handle scales was somewhere between red and pink. More than a month of use has darkened that color to a subdued purple. Micarta is one of my preferred handle materials for precisely this reason; it absorbs the oils in your hand and forms the equivalent of a patina. When polished, the pores of the material are closed and this process won’t occur. Fortunately Viper left the handle slabs just rough enough to facilitate the “aging” process. If this material isn’t to your taste, don’t worry: the Dan is also available in carbon fiber, green G10, and silver twill/G10.

Contoured handles were once a rarity in high-end production knives, but fortunately most companies are starting to see the ergonomic benefits of doing so. The contouring on the Dan is executed perfectly; the handle slabs are symmetrical, smooth, and comfortable. There are no sharp corners, and the only point that could generate a hotspot is the pocket clip (but no more than any other clip).

Most folding knives that are comfortable in the hand are likewise comfortable in the pocket, and this is no exception. The clip provides plenty of tension, but isn’t so tight that I’m worried about tearing a stitch. If I had to find a complaint it’s that the Dan is a bit long in the pocket. Not only is the handle pretty long for a relatively small blade, but the extended tang compounds the issue. It’s never been a real cause for worry, but I feel some attention should be called to it. It’s comparable in length to the Paramilitary 2 (though nowhere near as wide).

Deployment and Lock-Up

As much as I love slipjoints, I’m always slightly disappointed that I can’t access the blade with one hand. It’s not always essential, but sometimes the extra step is a tad inconvenient. The process of “pull pocket slip out, pull knife out of pocket slip, put pocket slip back in pocket, open knife, cut,” looks pretty silly next to “pull knife out of pocket, open knife, cut.” That said, most of the slipjoints I’ve handled that can be opened with one hand are less than cooperative, and by extension aren’t fun to fidget with. In this, the Viper Dan is different. The blade is deployed by rotating the extended tang with your thumb, similarly to a friction folder. Machining on the tang (jimping) ensures that your finger doesn’t slide off mid-deployment. Overall, the Viper Dan is quick, easy, and even a bit addictive to open and close.

Viper chose their patented Action Stopper system instead of a lock on the Dan series. How it works is pretty simple: each of the liners has a spring tab with a ball detent, similar to a frame or liner lock. These detent balls drop into corresponding slots in the blade at the closed, half-stop, and opened positions. While the mechanism isn’t fundamentally new, it does feel more secure than other iterations of this system that I’ve handled. If I had to make a comparison, I’d say it offers as least as much resistance as the Victorinox Pioneer.

The advantage of this system over a traditional backspring is twofold: one, it allows for a wider blade to be housed within the handle, and two, it accommodates space for an extended tang (much like what you’d see on a friction folder). If you grip the Dan with your thumb resting on the spine of the blade, you’ll have a strong slipjoint mechanism, a half stop, and the pressure of your own thumb keeping the blade away from your fingers. On the whole it’s a very secure system.

Viper Dan 2 Review – Final Thoughts

Typically, the Viper knives that get the most attention are the collaborations with Jesper Voxnaes (for good reason). Thus far, the Dan series of knives haven’t been hit by the spotlight, and I think that’s truly a disservice. I can’t say this often, but I don’t have any real complaints about this knife. The design is unique, the materials are top shelf, and it’s manufactured to very tight tolerances.

Slipjoint knives are the sort of thing that I can recommend to anyone. Even people that don’t like slipjoints occasionally need to go somewhere where locking folders are discouraged (or illegal), so most knife nuts should have at least one non locking folder in their collection. Should this knife be it? That I can’t say. But I can say that if you want a slipjoint that can scratch that flipping itch, this should be it. It sells for just over $100 USD and is a fantastic value at that price point.

No products found.

I recommend purchasing the Dan 2 at BladeHQ or Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Victorinox Pioneer X

by Grayson Parker 9 Comments

Last Updated: August 18, 2018

2016 is shaping up to be a damn fine year for gear geeks.

Buy the Victorinox Pioneer X at BladeHQ

Buy on Amazon

I think this began when Benchmade unveiled a shake-up in their Griptilian line, offering an upgraded steel (from 154cm to 20CV) and handle material (from nylon to G10). This was something Benchmade fans had long been begging for; so much so that a market for replacement handles for the Griptilian emerged. It seems that Benchmade finally realized how much money they were leaving on the table and acted accordingly.

For a long time, it seemed that Victorinox was in the same position. Despite how wildly popular their Alox line is among gear aficionados, the number of Alox tools rarely (if ever) increases. Much like with custom handles for the Benchmade Griptilian, a small industry has grown around the concept of modifying stock Swiss Army Knives. If you can imagine a combination of tools, handle materials, and other perks, it can be made, assuming you can afford it. One of the most popular modifications is the addition of scissors and a pocket clip to the Victorinox Pioneer, but even that costs nearly $200.

I had honestly resigned myself to saving up for one of these custom Pioneers, as I was convinced Victorinox would never remedy the situation. While scissors aren’t technically necessary on a multitool that already has a knife blade, they are quite handy; especially in places where a knife isn’t kosher. Likewise, a pocket clip (while not necessary) would be a big improvement. Thus, I set the idea aside until I could actually afford it.

By that, I mean I set the idea aside for a week or two, because it turns out Victorinox was listening. Take a gander at the Victorinox Pioneer X.

Granted, that’s only half of the changes I wanted. But if I had to pick, it’d be the change I’d like to see first. The scissors add a function that many have been wanting to see for some time, and there are workarounds to the lack of a pocket clip. Most of the comments from my review of the Pioneer and the Electrician will hold true here, although I should note that because of the extra layer, the Pioneer X won’t carry quite as well. Still, this will be the go-to Swiss Army Knife for many gear geeks going forward, and for good reason. I’ll be purchasing one, and I urge anyone in the market for a multitool to do the same. Who knows? If this sells well enough, maybe Victorinox will expand the Alox line.

UPDATE:I’ve since purchased a Pioneer X. To say that I underestimated how much I would love this knife would itself be an understatement. It kicked most other knives out of my pocket for about a month, and even now I end up carrying it every other day. The value added by the scissors is hard to quantify. I use them about half as often as I use the knife blade itself. That may not sound like much, but somehow this combination of tools handles 99% of the tasks I run into any given day.

I will say that my one concern (that it would be difficult to carry) has turned out to be true. It’s not considerably harder to carry than a normal Pioneer or an Electrician, but I do have to juggle things around in my pocket more than I’d like. My work pants have a pocket that is perfectly sized for the Pioneer X, but normal clothing requires a bit of Tetris to make it ride comfortably.

But I love Tetris, so buy this knife even if you have small pockets. It’s even cheaper nowadays.

Victorinox Pioneer X Alox Swiss Army Knife, 9 Functions, Swiss Made Pocket Knife with Scissors, Reamer, Key Ring and Large Blade - Silver

A CUT ABOVE THE REST: Compact, agile and ready to face any adventure head-on. Our range of Swiss Army Knives have been established since 1897 and continue to be an icon of utility and smart design.
DURABLE CONSTRUCTION: Swiss made stainless steel construction encased in our popular scales offers a slimmer profile and is extremely resistant.
COMPACT CARRY: Bring this knife with you on your daily adventures without sacrificing space. It makes a great gift for any occasion or stocking stuffer for Christmas.
FIT FOR ALL TASKS: At their heart, all our pocket knives are a survival tool; multitaskers that deliver in any situation. At their most evolved they have surpassed basic function to pioneer space travel and restart engines.
TRUSTED QUALITY: Made in Switzerland; Victorinox provides a lifetime guarantee against defects in material and workmanship. Making a lifetime commitment has never been so easy. No assembly required, money back guarantee.

If you would like to buy a Victorninox Pioneer X, I recommend purchasing it at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zebralight H52w Review

by Grayson Parker 12 Comments

Last Updated: August 30, 2019
I’m going to say this up-front so that everyone knows where I stand. In my opinion, the Zebralight H52w is the best light released in the last few years. Other lights surpass singular aspects of its performance. It doesn’t have the best runtimes, the highest lumens count, nor is it the smallest light available. The user interface can be a pain. Despite that, it performs so well across the board that I often wonder if I need another flashlight. Some compromised designs are flawed because they do nothing well. Fortunately, that’s not the case here.

No products found.

Of course, this isn’t a controversial opinion among gear geeks. When the Zebralight SC52 debuted, it received effusive praise from the community. It was (and still is) something of a dream light. It manages to cram stellar runtimes and high output into a compact package fueled by a simple AA battery. Great as that light is, it doesn’t have the trait I wanted most: the ability to wear it as a headlamp.

Some background: I used to be in the Boy Scouts. We’d traipse all over any kind of terrain you could care to name, and I used a light on those trips on a regular basis. While most of the scouts in my troop (and some of the leaders) started out with mini Maglites, we had all switched to headlamps within a year. Headlamps let us keep our hands free while we were hiking in or setting up camp. Even at home, the various flashlights tucked away in odd nooks and crannies were gradually replaced by headlamps.

Sadly, most headlamps aren’t suitable for pocket carry. They often require multiple batteries, and though lightweight they’re often bulky. You could get away with keeping one in a backpack or messenger bag, but you’d look like a bit of a goober breaking it out.

All of that is a roundabout way of saying that the Zebralight H52w neatly solves the unstated dilemma. Whether clipped to the pocket or riding on the forehead, this light offers the best of both worlds. I’ll go into more detail below.

General Dimensions and Construction

The Zebralight H52w measures in at 3” long, .86” wide (at the widest point), and weighs 2 oz. with the battery. That this light is considered medium size astounds me, but such is the state of the market today. For a flashlight in the 1xAA format it’s quite lean; if it were any smaller I’d worry about the durability of the light itself. Zebralight typically goes with a natural HAIII coating and I applaud the choice. I haven’t seen any undue wear, and the grey/green is subdued without being “tacticool.” Overall, the quality of construction is top notch. For someone with a reputation for being
finicky, I can’t register a single complaint with regards to construction.

Some may find the appearance of the H52w odd. The angled flashlight design hasn’t been mainstream for decades, and people have become unaccustomed to it. Personally, I love the aesthetics of this light. It’s not just that the angled lens harkens back to the 1940s and 1950s, though that is part of the appeal. Moreover, between the heat sinking on the back of the lens and the scallops of the body, this light feels like the art deco inheritor of those earlier models. I could see this as a gadget for Batman in the 1990s animated show or clipped to the suit of the Rocketeer. Maybe I’ve gone off the deep end, but check out what the H52w looks like once polished and tell me it doesn’t look like a vintage ray-gun.

Output, Runtime, and UI

To be perfectly honest, I stopped paying attention to the lumens arm race after purchasing this pocket spotlight. The 280 lumen high is outpaced by plenty of offerings from competitors, but the differences aren’t enough to turn me off. I’ve used it to bike home in the dark, and the high mode lights up the path ahead brilliantly. The medium and moonlit low are very useful, the low in particular. I use Sanyo Eneloop AA’s in this light. Zebralight recommends them, and rechargeable batteries are cheaper in the long run.

When this light was released, the true selling point was a moonlit low that lasted 3 months. Granted, that low only provides .01 lumens, but it’s enough light to read by in the dark. The runtimes on high and medium are also pretty impressive: 280 lumens for .9 hours, and 50 lumens for 7.5 hours. I find myself using the medium setting surprisingly often. Black widows are everywhere in my hometown, and the low doesn’t offer quite enough light to spot their little red hourglasses. 50 lumens is more than enough to notice them without competing with the headlights of passing cars.

These settings may not be to your liking. Fortunately, Zebralight’s user interface allows for a certain amount of customization. Here’s the catch: accessing these extra modes requires using the advanced UI. This is the worst part of the light. I’m not going to bother explaining the advanced UI here – it’s that complex – so just go look at their website. It’s not impossible, but it does require some trial and error. As for the normal interface, I have no complaints. To turn it on in high, simply press the button and release it quickly; medium, double-click; low, press and hold for .6 seconds and release. If you want to bug your friends triple click for the strobe feature. I really appreciate that you can access the high and the low without cycling through multiple modes.

Ergonomics and Carry

Ergonomics on the H52w are solid. It doesn’t have enough length to get more than three fingers on the light, but the scallops on the body tube aid the grip enough that I’ve never had cause for worry. The clip isn’t my favorite but doesn’t negatively impact the grip. I prefer the angled body ever so slightly in terms of ergonomics: it just feels more natural to have my hand up (as if I were holding a hammer) than down (as if I were holding a garden hose). When the H52w is strapped to your skull, it’s about as comfortable as a headlamp gets. It’s not heavy enough to pull down on the strap, and the cloth itself is fairly soft. It even pairs well with a bicycle helmet.

Both the strap and the pocket clip are well made. Some folks dislike the clip – it’s a friction clip, so in theory it can slide around – but I’ve never experienced that problem. The clip seems to be made of a spring steel, and can be attached to either end of the light. It’s worth noting that between the high tension of the clip and the grip scallops, I worry about shredding my pocket edges. That situation has never come up, but I’d be on the lookout. Luckily it carries beautifully without a clip, sliding into most coin pockets with ease.

Zebralight H52w Final Thoughts

Go buy this light (if you can, Zebralight has availability issues early in the year because of Chinese New Year… no, really). There is no situation I’ve run into where the H52w was insufficient: be it housework, monkey business, or just getting around in the dark. The only people I’d not tell to buy an H52w are people who already own one. If I had to ask for a change, I’d appreciate something other than a button activated light. Selector rings are much easier to operate in general.

Ultimately, that complaint can’t hold this product back. If you want a flashlight that is just at home navigating dark forest trails as it is illuminating a book (without waking up your partner), this is it. It’s a rare sort of product even years after its debut. Typically they can be had for around $64.00.

The best recommendation I can give is this: I haven’t bought a light since I purchased it, and if it was lost or damaged, I’d immediately order a replacement. Sure, it doesn’t always end up in my pockets. But like the Alox Cadet or the Paramilitary 2, I couldn’t fathom not having one for long.

No products found.

I recommend purchasing the Zebralight H52w at Amazon. Thank you for reading.

Kershaw Strobe 1086 Review

by Grayson Parker 3 Comments

I’ll be honest: budget knives are rarely on my radar. Not because I’m sitting on wads and wads of cash, but because most of the time budget knives are compromised in some way that triggers my snob reflex. There are exceptions, but those tend to stand so far above the rest of the field that it’s easy to write off the entire category. Not every budget offering is a Kershaw Skyline or an Alox Cadet, but that doesn’t mean they aren’t good knives. Oftentimes, they’re just flawed in some way that makes the knife community shrink away before taking a deeper look. One such product is the Kershaw Strobe.

Buy the Kershaw Strobe at BladeHQ

Buy on Amazon

The Strobe is a Chinese-made knife, designed by Matt Diskin and produced by Kershaw. Although Matt’s designs aren’t the trendiest, I prefer his design cues to other, more marketable names. Prior to the release of the Strobe, the only production with Matt’s name on it was another Kershaw release, the Diskin Hunter.

I’ll come out right now and say it: had Kershaw used the same materials on the Strobe that they did on the Hunter, this knife could have been the next Skyline. The combination of G10 and Sandvik 14c28n is one of the reasons I love Kershaw’s stateside offerings, and to see them miss this opportunity is disheartening. Still, the Strobe is no slouch. Apart from one obvious design flaw (hopefully one Kershaw will address in a future release), the strengths of the Strobe carry it past the lackluster materials.

General Dimensions and Blade Details

Perfectly sized for a “do-anything” work knife, the Strobe boasts a 3.3” blade, an overall length of 7.55”, weighs in at 4.37 oz, and is made in China. It’s a bit on the heavy side when compared to all stars like the Skyline, Mini-Grip, and some of the lightweight options from Spyderco, but in my two months of on-and-off carry the Strobe’s weight hasn’t been a real detriment. The blade is long enough to actually be justified, as opposed to knives with blade lengths that are just over the common limit of 3”.

The blade itself is plain, but better for it. A narrow drop point profile is complemented by a funky angular swedge that sits at the middle of the spine, and the full flat grind matches the technical aesthetics behind the knife. It’s quite impressive how wide of a blade Diskin managed to fit onto a (relatively) slim knife. There’s a nearly perfect amount of belly to the blade, and it slices nearly as well as my Paramilitary 2.

8Cr13MoV is a pretty common choice for budget Chinese knives, and in this iteration I can’t complain. Bead-blasted 8Cr is very susceptible to rust, but fortunately the Strobe comes with a nice stonewash. There’s not a whole lot to say about this steel. It sharpens easily and holds a decent edge, but needs frequent touch-ups. While I don’t have any complaints, I’m not impressed either. It’s a solid choice given the country of origin.

Handle, Ergonomics, and Carry

However, it’s harder for me to warm up to the handles. The plastic isn’t even the problem – on the contrary, I think it’s a great way for companies to produce contoured handles on budget knives. What really bugs me is the “K-Texture” pattern they used on the scales. It’s not pronounced enough to improve the grip, so all it does is turn your pocketknife into an ad for Kai. From a distance the “K-Texture” looks like a simple geometric pattern, but in your hand it’s pretty garish. To their credit, Kershaw and Zero Tolerance have been toning down the logos and branding on their products, but they clearly took a step backwards here. I can’t advocate removing the scales (some have done so) as the scales help the grip, but it’s the shape and thickness of the scales that help, not the texture.

Despite the disappointing handle scales, the Strobe is great in the hand. The shape of the handle locks the user’s hand in place without generating any hotspots. Even the clip (which I thought would poke me right in the palm) fails to negatively impact the grip, but I will say that it could be problematic in someone else’s hands. There is no jimping on the Strobe, which is definitely a welcome omission. I haven’t once found myself wishing otherwise.

The Strobe carries fairly well. It doesn’t need to be wrestled into or out of the pocket, but the clip is a bit tight on thicker pants. My feelings on the pocket clip are pretty polarized: on the one hand, the over-the-top clip is great. On the other, it lifts up pretty significantly to allow the clip room to slide over pockets, which makes it something of a paint scraper. It also snags on my jacket far too frequently. Is it a big issue? No, but I’d be lying if I said that it didn’t rub me the wrong way.

Deployment and Lock-up

Kershaw has been really dialing in their flippers across their product line, and the Strobe is no exception. The combination of a strong detent and the bearing pivot results in a flipper that fires almost every time. While the pull is a bit strong for my tastes, most of the knife community seems to prefer their flippers that way. And as much as I love the Skyline…the Strobe does deploy faster and more consistently.

Although some have billed the lock on the Strobe as a liner lock, it’s really a framelock in disguise. I haven’t noticed any blade play or lock rock, and the knife feels pretty stout. I do wish there was a larger cutout for disengaging the lock; as it stands, it’s pretty easy for your thumb to slip off the lock when attempting to close the knife. Other than that I can’t complain.

Kershaw Strobe Review – Final Thoughts

Viewed in a vacuum, the Strobe is a great value knife. It’s readily available at big box stores, costs less than $30.00, and can take a beating. I’ve got major issues with the “K-Texture” on the handle scales (I’m not alone in that either) and a minor complaint concerning the clip, but in the grand scheme of things neither are mortal sins. When you compare it to other options around this price point, I don’t think it’s quite as competitive. Personally, I still think the Skyline blows it out of the water, with better steel, G10, and less weight. But the Skyline also costs around ten dollars more. If I had to choose between the Strobe and one of the Hinderer/Onion/Emerson collaborations at the same price point, I’d go with the Strobe most of the time.

If you’re on a budget or enjoy budget knives, the Kershaw Strobe should definitely be on your radar. The lines of the design are pretty beautiful, and if it weren’t for the K-Texture it’d be a great looking blade. It’s probably out of the question for Kershaw to re-release the Strobe with better materials, but hopefully it sells well enough to merit future Diskin/Kershaw collaborations. Now if you’ll excuse me, I’m going to sand the “K’s” off of my Strobe.

Kershaw Strobe 1086 Plain Edge Folding Blade Hunting Knife, (Box Version) 3.3" grey

FOLDING POCKET KNIFE: Made of highest quality material, the Kershaw Strobe pocket knife is the perfect everyday carry. Experience stainless steel precision and durability.
STAINLESS STEEL 3.3" BLADE: Made from 8Cr13MoV stainless steel, the Strobe blade has great edge retention, strength and hardness. Rugged stonewashed blade helps hide scratches and fingerprints.
COMFORTABLE, ERGONOMIC HANDLE: Crafted from 410 stainless steel, the Strobe handle delivers a stylish look and smooth function. Offering a secure grip, the Strobe is ready for any cutting action.
MANUAL OPENING mechanism and KVT ball-bearing system provide secure knife opening and blade access. Frame lock secures the blade for extra security and safety.
ATTRACTIVE, INDUSTRIAL DESIGN: Grey, stonewashed blade and stainless steel handle present a stylish look. This EDC pocket knife is sure to turn heads wherever you go.

Editor: I recommend buying the Strobe at Amazon or BladeHQ. Thanks for reading.

Victorinox Alox Pioneer and Electrician Review

by Grayson Parker 6 Comments

There are few companies which possess the brand recognition that Victorinox does. At one time, they were one of the co-producers of the Swiss Army Knife. In 2005, they purchased their ailing rival, Wenger, and have since consolidated the two brands under one label. For many, the word “pocketknife” is synonymous with the little red handle and silver cross of the Swiss Army Knife (or SAK).

Buy the Victorinox Pioneer at BladeHQ

Buy on Amazon

Much like traditional folders, these multitools possess a certain charm that declassifies them as weapons in the mind of the general public. Most people are familiar with the plastic handled models: they are cheaper, and more widely available in “big box” stores such as Walmart and Target. Although offerings such as the Classic and the Spartan are ubiquitous, they aren’t the best that Victorinox has to offer. In my opinion, that title is reserved for the Alox line of multitools.

“Alox” SAK’s were first introduced in 1957 and represented a fundamental shift away from the original design of the Swiss Army Knife. This variant – the Pioneer – featured aluminum handles, a cigar shaped handle, and a bottle opener in addition to the main blade, awl, and can opener. It was originally intended for civilian markets, but a reputation for sturdiness prompted the Swiss armed forces to adopt it. The Soldier (a cosmetically modified Pioneer) was issued to Swiss troops from 1962 until 2008, when it was replaced by the Soldier 08. Fortunately, Victorinox still produces the Alox line, though it hasn’t been updated in quite some time. Today I’ll be looking at two very similar models in the 93mm family of tools: the Pioneer and the Electrician.

General Dimensions and Tools

Each model features four identical tools: a main blade, a combination flathead screwdriver/bottle opener, and an awl. The Pioneer has a can opener (with a smaller flathead driver on the tip), whereas the Electrician has a 1.6” long sheepsfoot blade. Both have a closed length of 3.7”, a blade length of 2.8”, and an overall length that’s just under 6.5”. Finally, each of them weighs around 2.5 oz. All of these numbers are pretty comparable to similarly sized traditional knives. That’s quite an impressive feat, considering the number of tools Victorinox managed to fit onto these things.

I’ll be the first to admit that 99% of the time I’m just using the main blade or the bottle opener, but the other tools are well designed and occasionally save the day. Ironically, I’ve found that having the odd tool like a can opener, a corkscrew, or an awl only becomes more important as companies move towards “tear along the dotted line” style packaging. Society is becoming used to not needing these small, handy tools. As a result, that can opener might not be in the kitchen drawer when you need it to be. Sure, you might look insufferably handy whipping out your Swiss Army Knife, but you’ll save someone a trip to the nearest store by doing so.

The materials here are fine, even in comparison to modern “tactical” folders. While the edge does need to be regularly maintained, it can be done just about anywhere. I’ve used the bottom of a coffee cup as a stone and a bit of cardboard (no compound) as a strop on more than one occasion, and the results aren’t much worse than what I get from my stones and strop at home.

This steel’s corrosion resistance is quite impressive—so much so that I’ve put my Cadet away wet without consequence. Chipping has never been an issue. All the tools fit neatly inside the aluminum frame without rubbing against each other or the scales, and crisply snap open and closed. It should be noted that Alox models do not have rear mounted tools; as a result of this, the backspring runs the entire length of the spine. As a result, the pull is much stronger.

Handle, Ergonomics, and Carry

Of course, the real differentiating mark between the Alox and the normal models are the ribbed aluminum handle scales. They’re slimmer, more durable, offer a better grip, and in my opinion are much more attractive. The anodization on every model I’ve handled has been quite good, though fairly prone to wear. On the silver models the wear is barely discernable, but with other colors you’ll see fading occur within hours of exposure to your keys.

None of this impacts the stellar grip. With a classic cigar shaped handle, gentle texturing, and slight chamfering, both the Pioneer and the Electrician are very comfortable in the hand. The keyring on the Pioneer is occasionally pokey, but less so than a pocket clip would be.

On paper, the 93mm knives should be great pocket companions. About a month of experience has poked some holes in that assumption. By no means are they awful, but carrying either of these knives is occasionally awkward. Both the Pioneer and the Electrician are just a bit too tall for the front and watch pockets of most jeans (though they’ll fit into the extra-large watch pocket of my work jeans). Additionally, while the handles are great in terms of grip and aesthetics, they’re pretty slick in the pocket. My first Alox Cadet disappeared on me, and I can only assume that it slid out of my pocket one day as I was lying down.

Both models will fit inside a KnivesShipFree Main Street slipcase, which is a great way to distribute the odd dimensions in a bit more comfortable fashion. If that’s not up your alley, the Pioneer has a keyring that you can attach a lanyard to.

Victorinox Pioneer Review – Final Thoughts

Personally, it’s hard to find something new to say about a pair of tools that are fairly well-known among gear aficionados. Neither is as svelte as the Cadet, but they offer longer blades, a more outdoor oriented set of tools, and a better grip. They’re a bit too large to play the role of a back-up knife, but make for a fine primary tool (especially around folks who get fidgety around modern knives). The handles are so classy that either of these could serve as a dress knife, yet the tools are rugged enough for just about any “prepper” scenario.

If I had to pick one of them, I’d pick the Electrician. I rarely use the keyring on the Pioneer, and the funky secondary blade on the Electrician is great for opening packages without worrying about damaging the contents. Both are tools that I’d recommend to anyone, especially at the $30 price point you can find them at.

Sale

Victorinox Swiss Army Pioneer Pocket Knife, 91mm

Sport type: Camping & Hiking

Victorinox Electrician Swiss Army Knife, 8 Function Swiss Made Pocket Knife with Electricians Blade and Wire Scraper - Silver

A CUT ABOVE THE REST: Compact, agile and ready to face any adventure head-on. Our range of Swiss Army Knives have been established since 1897 and continue to be an icon of utility and smart design.
DURABLE CONSTRUCTION: Swiss made stainless steel construction encased in our popular scales offers a slimmer profile and is extremely resistant.
COMPACT CARRY: Bring this knife with you on your daily adventures without sacrificing space. It makes a great gift for any occasion or stocking stuffer for Christmas.
FIT FOR ALL TASKS: At their heart, all our pocket knives are a survival tool; multitaskers that deliver in any situation. At their most evolved they have surpassed basic function to pioneer space travel and restart engines.
TRUSTED QUALITY: Made in Switzerland; Victorinox provides a lifetime guarantee against defects in material and workmanship. Making a lifetime commitment has never been so easy. No assembly required, money back guarantee.

If you would like to buy a Pioneer or Electrician, I recommend purchasing them at Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

DPx Aculus Review

by Grayson Parker 12 Comments

The first time I noticed a gear company use the words “executive protection,” I was browsing the Goruck website. I was in the market for a backpack (my Jansport had succumbed to a combination of heat, dirt, and heavy loads) and saw that Goruck had recently released a sleeker bag that was stripped of the exterior MOLLE webbing. Their product literature claimed that these design changes were meant to appeal to individuals working in high-end private security. While I thought the justification was a little silly, the design was still attractive to me – all the moreso because I am (contrary to what you may have heard) not working in executive protection.

Some time passed, and I had entirely forgotten about it. Then it cropped up again: Triple Aught Design had finally gotten around to releasing a pair of jeans, but marketed them to the corporate security crowd. I can tell you from personal experience that the jeans are awesome, but again the marketing was confusing.

Enter the DPx Gear Aculus: another lust worthy piece of gear that was apparently designed with undercover operations in mind. While I can’t speak for its effectiveness in that regard, I can tell you that it’s what I would expect Robert Young Pelton’s version of a “gentleman’s knife” to look like. If you believe the rumors, the Aculus was first designed on a napkin – though with R.Y.P.’s reputation, that doesn’t sound like a tall tale. The design was then licensed to LionSteel, who produced it as the TiSpine. Under the terms of the agreement, DPx would sell the Aculus in limited quantities and only sell it directly from their website.

DPx sells the Aculus as their “gentleman’s knife”; and, compared to the rest of their product line, that makes sense. However, when you are not comparing it to blades that are ¼” slabs of tool steel, that claim falls apart. I can’t presume to be a gentleman, but I’ve found myself in a suit on a few occasions, and none of them were situations where a knife like the Aculus would be appropriate. Does that mean that the Aculus is a bad knife? Far from it, but there are some caveats you need to be aware of.

General Dimensions and Blade Details

The Aculus has a blade length of 3.35”, a closed length of 4.33”, and weighs 3.53 oz. Overall, it’s a bit smaller than a Spyderco Paramilitary 2, but has a cutting edge about as long. Although I can’t quite see the resemblance to a scorpion tail (the namesake of the knife), I have to admit the blade shape is very attractive. There is plenty of belly, but not so much that the blade slips during fine cutting tasks. The swedge takes away a moderate amount of steel—not enough to compromise the tip geometry, but certainly enough to help with piercing tasks. It adds a nice aesthetic touch to boot.

Sadly, that durability makes the Aculus a poor slicer. It handled cardboard just fine, but food prep was challenging. This was disappointing, as picnic lunches seem to be one of the few true occasions where a “gentleman’s knife” is warranted. For some reason I had always assumed the Aculus featured a hollow grind. While that wouldn’t make it an insane cutter, it would be a big help. If you have an Aculus and feel that the blade is too thick behind the edge, I’d look into having it reground. However, that’s assuming that you do a lot of slicing. Many of today’s cutting tasks are just that: cutting. Breaking down boxes, opening packages, and other utility jobs don’t often require a thin blade, and in some cases it can even be a liability. As for me, I use my knives at lunch frequently and would prefer a hollow grind.

This was my first experience with Niolox steel, and online research provided confusing and often contradictory information. In this iteration, the steel was very impressive. I used the Aculus to prepare food, break down cardboard boxes, and even shave some drywall. It handled everything I threw at it, kept a working edge for a long time, and stropped easily. From what I saw online I expected corrosion to be an issue, but that hasn’t come up. DPx loves their tool steels, and I can’t see any reason why they shouldn’t.

Handle, Ergonomics, and Carry

Of course, the handle is the draw of the Aculus. Integral frame locks (especially at the production level) are technical marvels and a sign of how far the cutlery industry has advanced in recent years. DPx and LionSteel knocked it out of the park. The diamond pattern is striking – almost like corrugated steel brought to a high polish. Between the attractive curves, slight contouring, and aforementioned machining, the Aculus is quite pleasant in the hand. The handle is a bit slim, but the traction from the 3-D machining makes up for that. It’s comfortable in just about any grip, including when the knife is closed.

The Aculus is slim, contoured, and features an over-the-top pocket clip. Said pocket clip meets the butt of the handle at an angle, and while it does increase the rate of pocket wear in jeans, it nestles pleasantly in slacks and suit pants. Honestly, the only complaint I can make about the clip is that DPx etched their skull logo on the clip. I’m not one for logos, especially on a knife that’s supposed to be unobtrusive. It’s not that the logo is garish or without charm; it just feels out of place. I’d like to see the same approach they take with the ‘Triple Black’ series applied here, where most of the branding is hidden or left off. Robert Young Pelton’s design motif speaks for itself – you won’t mistake his style for someone else’s.

Deployment and Lockup

After doing some research on the internet, I was under the impression that the Aculus was – despite the cut out for the thumb – a two-handed opening knife. For the first three weeks that I had the Aculus, it was tricky to open it with one hand. It wasn’t until I saw a video on DPx Sean’s Instagram page that I realized the Aculus could actually be ‘coin-flipped’ open. Opening it that way is a little unintuitive, but once you get the hang of it it’s pretty easy, even addictive. I don’t know if that’s something I would recommend on a knife this nice, but if the folks at DPx can get away with it, I think the end user can too.

Throughout the testing period, the lock-up was fine. I didn’t have a problem with a sticky lock (which has plagued other DPx models) and the lock-up is stable at 70%. There is no blade play in any direction, and I never thought it would give. Still, integrals make me nervous. I can’t help but feel that if something goes wrong, you are up a certain creek without a paddle. A lock-bar insert (as featured on the LionSteel SR-1) would do a lot to put my mind at ease, but for whatever reason one wasn’t included here. Because of this, I have trouble with the “hard use” moniker. Bear in mind DPx has a stellar warranty service, so my fears are likely unwarranted.

DPx Aculus – Final Thoughts

I can’t refer to this as a “gentleman’s knife” or a “hard use” knife, much less both. The former because there is really no use for such a tool at an academic conference, at a cocktail party, a political function, or a courtroom. In some of those cases the Aculus would even be confiscated on the way in. If you’re the one doing the confiscating (for instance, working private security), then you probably need this knife for reasons that a twenty-something graduate student can’t relate to. As for the “hard use” claim, I’m skeptical enough of normal frame-locks in that role. Besides, the Aculus is really too pretty to shunt into rough tasks.

For modern knife enthusiasts, the Aculus pushes a lot of buttons. It is fun to fidget with, easy to carry, and drop-dead gorgeous. It doesn’t slice very well, but for most people that won’t be a big deal. Ultimately, even though the Aculus isn’t a “gentleman’s knife,” or a “hard use” knife, it’s quite impressive and undeniably attractive. For collectors and folks that don’t mind thicker blade grinds, I’d recommend this knife. However, if you regularly use your knives for food prep, this is one you might want to pass on. In either case, I’m excited to see what DPx will do in the future, even if I have to endure a bit of unnecessary marketing.

DPx Aculus – From $350.00
From: dpxgear.com

Note: The Aculus has been discontinued, so if you are looking to buy one at retail I think you will have a hard time. You may be able to snag a used one off the forums. I recommend buying other DPx knives at Amazon and BladeHQ. Please keep in mind that purchasing anything through the links on this website helps support BladeReviews.com. Thank you very much!

Editor’s note – having reviewed the TiSpine myself, I thought it would be fun to get Grayson’s take on the Aculus. I think he makes some valid points. Not my first choice for a gent’s folder, or a hard use tool, but it’s undeniably a beautiful knife and a marvel of engineering and craftsmanship. Well worth considering if you are at all intrigued by the design.