Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

Viper Odino Review

by Dan Jackson 16 Comments

The “Italian Renaissance” of knife making has been on my radar for a few years now. Manufacturers like LionSteel, Fox, Fantoni, and Viper are getting more traction stateside. The Italians have been doing some interesting stuff with manufacturing and innovation over the past few years, and the level of quality is often exceptionally high.

Buy the Viper Odino at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00SNANJ2K” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

However, if the end goal is selling knives in the USA, one way these companies have totally missed the mark is by failing to collaborate with high profile custom knife makers. This is a technique that has been leveraged to great success by companies like Spyderco, Kershaw, and CRKT. Viper has worked with some great Italian designers in the past, but if the goal is selling knives in the US market you need to play the game. That game involves working with designers that are popular in the US.

Viper finally got the memo, and entered into a bold high end collaboration with custom knifemaker Jesper Voxnaes to bring us the Odino. When I went to Blade Show 2014, the Odino was in pre-production, and all they had were some prototypes to handle. The knife was one of the highlights of the weekend, and I predicted that it would be a substantial success for the company when the knife eventually released. When I returned for the 2015 show, the Odino had been in production for the better part of a year and was a best seller for Viper. Jesper Voxnaes’ designs are as in demand as ever, and the quality in Viper’s manufacturing is top notch. I was not about to let another year slip away without reviewing the Odino.

General Dimensions and Blade Details

The Odino has an overall length of 7.25″, a 2.875″ blade, weighs 4.35 ounces (the carbon fiber version), and is manufactured in Maniago Italy. I would describe the Odino as a medium size every day carry (EDC) knife. It is more substantial than something like the Anso/Vox Pingo, but it won’t pull your pants down. The sub 3″ blade make it acceptable to carry in many locations. It comes in a variety of handle configurations, including full titanium, G10 / titanium, and carbon fiber / titanium (shown here). I prefer the carbon fiber version because it is lightweight and a little cooler than than the G10 model. The full titanium Odino is nice, but is a little hefty for my taste.

The Odino features a dramatic clip point blade. The knife has a wide profile, and the blade is relatively stubby when compared to the handle. The result is a substantial belly that meets at an acute tip. The blade is 3.8mm thick, and has a high flat grind, and comes with either a PVD coated blade or satin finish. The spine is rounded and the edge has been neatly applied.

Viper went with Bohler n690 stainless steel for the blade, a common choice among Italian manufacturers, and a steel that I am experienced with. I like n690 for an EDC knife. It reminds me somewhat of 154CM: it holds a nice edge, exhibits good corrosion resistance, yet is easy to sharpen and won’t break the bank. It takes a nice finish and strikes me as a great all round steel for a folder.

My Odino came sharp and was quickly taken to task on some plastic and cardboard. These can be challenging materials for a pocket knife, and I was pleased with the way the Odino’s thin flat grind handled them. Having carried the Odino for several weeks now I have found it capable as a daily carry piece. It is a good slicer, and has held up well under normal use.

Handle, Ergonomics, and Pocket Clip

The handle of the Odino includes a titanium locking side, your choice of titanium, carbon fiber, or G10 for the show side, and an anodized titanium backspacer. Construction is screw together, and the knife is simply finished with chamfered edges. The carbon fiber on my knife is nice, and I can’t detect any voids in the surface of it. The titanium has been stonewashed and left with a pleasant matte finish. The backspacer is arguably the nicest detail of the knife. It juts from the back of the handle, is designed to accept a very large lanyard, and is contoured and jimped. The powder blue anodizing provides a touch of color without being over the top. It’s a lovely feature. Everything has been beautifully implemented.

The Odino benefits from good ergonomics and is a solid performer in the kitchen and around the house. Naturally, being an Italian knife I had to make a pizza with it. There is no jimping on the spine, and none of the surfaces are especially “high traction”, yet the smart design kept the knife in hand without issue. I find myself choking up quite a bit on the ricasso, although the default grip sets you back on the handle a bit.

The pocket clip of the Odino kind of like a deep carry Strider SnG clip. Viper milled a slot into the handle, and a tab on the clip sits into the slot and allows the clip to be mounted with a single screw. It’s simple, but the end result is functional and elegant. The clip itself is nice. It does a good job burying the knife discretely into the pocket, has good retention, and isn’t funky. The clip has been bead blasted and it compliments the rest of the hardware.

Deployment and Lockup

The Odino makes use of an oval thumb hole to open the knife. Due to the low profile of the blade in the closed position, this isn’t the most convenient knife to open, but the thumb hole works well and is still relatively easy to get at. The detent is tuned to a good balance of blade retention and easy access. There are caged bearings inside and the action is extremely smooth.

The framelock on the Odino is simple and well executed. There is no steel lock bar insert or overtravel stop mechanism (2 features that have become increasingly common on titanium framelock knives). Some might be disappointed with the omission of these features, but the Odino’s lock performs great. Lockup on my knife is early and solid. There is no lock rock or blade play to speak of. The lock disengages smoothly from the blade and there is no stick. This is one of the better true titanium framelocks I have handled.

Blade centering is also perfect on my Odino.

Viper Odino Review – Final Thoughts

The Odino has sold well for Viper. In my weeks of carry and use, it is easy to see why. The design is thoughtful and elegant, the materials are top notch, the build quality is superb, and the price is reasonable for what you are getting. Viper was smart to pair up with Jesper Voxnaes for their first big collaboration. Vox is not just a respected name in the knifemaking community, he is a talented designer that brings function and restraint to his work. Viper did a beautiful job rendering his design, and the resulting knife is likely to appeal to audiences on both sides of the pond.

I especially like the G10 and Carbon Fiber versions for EDC. Weighing a full ounce less than the full titanium version, this compact folder has a very capable blade, is comfortable to use, and carries well. The full titanium version is tank like, and may appeal to folks who appreciate more substantial knives.

I don’t see much in the way of downsides when examining the Odino. The profile is a little chunky, and an oval thumb hole is not my all time favorite means of opening a folding knife, but if you are a fan of the design I think you will love the Odino. It is beautifully done and hopefully a sign of more high profile collaborations to come from Viper.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00SNANJ2K” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

Viper Odino – From $169.00
From: BladeHQ

[easyazon_infoblock align=”center” identifier=”B00SNANJ2K” locale=”US” tag=”brdfkdfk-20″]

I recommend purchasing the Odino at BladeHQ or [easyazon_link asin=”B00SNANNFI” locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Amazon[/easyazon_link]. Please consider that buying anything through the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Ultimate Hunter Review

by Dan Jackson 34 Comments

You won’t find too many hunting knife reviews on this website. The reason is because I am not much of a hunter. But despite being advertised as a hunting knife, there was something intriguing about the Cold Steel Ultimate Hunter that made me buy the knife.

Buy the Cold Steel Ultimate Hunter at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00U1I9OUS” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

Designed by Andrew Demko, this is one of the new Cold Steel offerings to feature CTS-XHP steel. Andrew has made a name for himself by bucking the trend of dialed in titanium frame lock flippers, and instead designing simple robust folding knives featuring his tri-ad lock, which is a modified back lock. Back locks (or lock backs) rank among the oldest types of locks for a folding knife. This is another utilitarian pattern from Andrew, but the inclusion of contoured G-10 handle scales the Ultimate Hunter make it one of Cold Steel’s most refined releases to date.

General Dimensions and Blade Details

The Ultimate Hunter has an overall length of 8.5″, a 3.5″ blade, weighs 4.9 ounces, and is made in Taiwan. This is a larger knife, but feels lightweight for its size. I have shied away from larger knives for every day carry (EDC) as of late, but the Ultimate Hunter has found a way to win me over and has been getting a lot of pocket time – especially on the weekends when I can get away with carrying a bigger blade. Some might scoff at the blade to handle ratio. I never bothered to measure, as the blade to handle ratio has never struck me as a useful metric for evaluating a knife, but for those who do care I will note that the blade is noticeably smaller than the handle. This is a working knife, and in my opinion a generous handle is welcome on a knife that you are going to be using seriously. Although I don’t hunt I have caught my fair share of fish and do a lot of cooking. Based on my experiences using knives while fishing and cooking I can at least speculate to the benefit of a larger handle when processing game.

The blade of the Ultimate Hunter is a simple drop point. It isn’t the sexiest blade shape, but it certainly works. The generous piece of CTS XHP steel has been given a high flat grind with a two-tone satin finish. It’s a lovely blade finish and is a great upgrade over a coated or bead blasted finish. The tip is capable, but not overly aggressive. It would probably serve well skinning and breaking down game without a huge risk of puncturing organs, but that is just conjecture on my part. It slices well and has done a tremendous job breaking down a number of commercial grade cardboard boxes, and I have used the knife to de-bone several chickens for roasting.

Arguably the biggest allure to the Ultimate Hunter is the inclusion of CTS-XHP stainless steel for the blade. It is almost impossible to read or watch a review of a Cold Steel folding knife in AUS-8 where the reviewer doesn’t bemoan the AUS-8 blade steel at some point in the review. I have become comfortable with AUS-8 over the years, and actually like it in inexpensive (sub ~$50) knives. That said I think CTS-XHP is a great choice, and an upgrade of the steel on Cold Steel’s folders is long overdue. I am very excited to see CTS-XHP on this knife.

Out of the box the Ultimate Hunter was screaming sharp. It annihilated cardboard. There is a strand of bamboo along the back fence in my yard, and after a South Florida storm 6 foot tall bamboo shoots will seemingly pop up overnight. Without judicious pruning the bamboo overtakes the entire yard. The Ultimate Hunter has proven itself to be very capable on “bamboo patrol” – gliding through 1″ thick shoots – and allows me to channel my inner Lynn Thompson. Edge retention has been good, but like any steel CTS-XHP will need touch ups and the occasional sharpening. So far I have just stropped and touched up the knife with the fine rods of my Sharpmaker. It is very easy to sharpen. This is a good upgrade over AUS-8, and I have been pleased with the performance of this blade.

Handle, Ergonomics, and Pocket Clip

The Ultimate Hunter features a linerless G10 handle with a stainless steel lock bar, black aluminum backspacer, and stainless steel fasteners. The G10 is 3-D contoured, nicely finished, and has an attractive “grain” to it. Despite the absence of metal liners, handle construction is very strong. The G10 is thick and there is absolutely no flex in the handle. All of the pieces line up nicely and the fit and finish is very good.

The Ultimate Hunter feels great in hand. The handle shape is very simple and easy to grasp. There is a small forward finger choil, and 2 “finger divots” towards the pivot. This divot catches your index or middle finger naturally when using the knife (it depends on whether you are choking up or not). The G10 appears to have been bead blasted, so it’s smooth, but not slippery. It still has a nice texture to it, but is nothing like the peel ply G10 on my American Lawman. There is some very wide jimping on the spine of the handle. It provides some traction if you are choking back on the handle, but is basically not-present if you are using the knife for regular work. That’s fine by me. The pommel has a small “dish” for your thumb in reverse grip. I don’t use my knives in reverse grip very much, but it does seem to be comfortable in reverse grip.

The handle of the Ultimate Hunter is drilled and tapped for ambidextrous tip up carry, and comes with 2 shiny stainless steel pocket clips. This isn’t an ultra-deep carry set up, but allows for relatively deep carry while still affording easy access. The clip is very sturdy and retention is secure. Because the handle is smooth G10 you don’t have to worry about this knife shredding your pockets like the American Lawman, or Recon 1.

Deployment and Lockup

The Ultimate Hunter has the same “lopsided” thumb stud found on models like the American Lawman and Voyager. The thumb stud is swappable for ambidextrous use. This is a proven thumb stud design and it definitely works. The lock has a very strong spring, and this is not a knife that I can flick open – even with wrist action. It definitely requires you to purposefully roll it open. Not a huge problem for me, but if you like being able to flick open your knives then this is worth noting. Inside there appears to be phosphor bronze washers. The action is nice and smooth.

For our locking mechanism, Cold Steel has equipped the Ultimate Hunter with the tried and true Tri-Ad lock. This beefed up lockback has proven itself to me time and time again to be a very robust and reliable lock. Here it is no different. The sound this thing makes when you snap the blade open is impressive, and is sure to annoy the heck out of your significant other if you obsessively open and close your knives like I do. Like all the other Tri-Ad lock knives I have owned, there is no blade play at all. It is very secure. The caveat to this is that the knife can be tough to disengage sometimes. I can disengage the lock with one hand, but this is really a 2-hand knife.

Cold Steel Ultimate Hunter – Final Thoughts

Labeling your product as the “Ultimate” anything is a bold claim – especially in an age of false advertising litigation. Cold Steel is known for being a over the top, but here I think the moniker may actually be deserved. The Ultimate Hunter is the nicest and most refined Cold Steel folder I have reviewed to date. Cold Steel has taken all of the things I like about their knives (the slick Andrew Demko designs, good ergonomics, excellent fit and finish, and tough build), and are finally mating these qualities to superior materials. And the manufacturing has been kicked up a notch too. The 3-D machined handle is beautiful and the blade is substantial.

That said, you are going to pay a premium for all of this. The Ultimate Hunter retails for a little over $100, a little more than a what new Recon 1 or American Lawman (in CTS-XHP) goes for. For the extra money you get a stouter knife with contoured handles. I think the Ultimate Hunter represents a good value.

Of course the irony to this review is that the Ultimate Hunter is marketed as a hunting knife, and I have never been on a hunt in my life. But I have plenty of experience with hard use folding knives, and the Ultimate Hunter is an excellent rough and tumble EDC. Regardless of the nomenclature, this is the high end Cold Steel Folder we have all been waiting for. Highly recommended if you are looking for a premium large folding utility knife and can get past Cold Steel’s aggressive marketing practices.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00U1I9OUS” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

I recommend purchasing the Ultimate Hunter at Amazon or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated – thank you very much!

*Note – I have no idea why the picture is of a SOG product.

Northwoods Knives Indian River Jack Review

by Dan Jackson 13 Comments

I have been interested in traditional slip joint knives for a while now. I am not alone. Many have come to enjoy the pocket friendly lines of a simple slip joint, and the thinly ground blades cut like nothing else. Some might find the absence of a lock unnerving, but in my experience most of the time a slip joint is more than enough knife for normal utility tasks.

Buy the Northwoods Indian River Jack at KnivesShipFree

As I wandered down the slip joint rabbit hole I eventually came across the Northwoods Knives Indian River Jack. Here is a simple single blade pattern, but with an upgraded blade steel (in this case, CPM-154). No other bells or whistles to speak of. Some might refer to this as an ever elusive “perfect EDC knife”.

The Northwoods Knives brand was purchased by Derrick Bohn of KnivesShipFree sometime around 2010-2011. Northwoods were originally made by Great Eastern Cutlery and Queen Cutlery (2 American companies specializing in traditional folders), and Derrick has continued the tradition of having the knives made in the USA by these manufacturers. The knife in this review was made by GEC, although the current version of the knife is made by Queen (at the time of writing this article, mid 2015). IRJ’s are released in small batches. Due to the limited supply and unique selling proposition of a 154CM blade, demand for the IRJ is out of control. The knives quickly sell out every time a batch hits Derrick’s website.

I was fortunate enough to snag one of the 2014 GEC manufactured IRJs, and have been carrying the knife for many months now.

General Dimensions and Blade Details

The IRJ has an overall length of approximately 6.25″, a 2.5″ blade, weighs 2.2 ounces, and is made in the USA. This knife has a similar footprint to my cherished Victorinox Cadet, and is an ideal size for every day carry (EDC) in my book. Certainly, this makes for a fine gentleman’s folder. And given the limited quantities of the IRJ I would classify this as a collectible as well. As I try to compare the IRJ with other knives in my collection, I would almost classify this as a cross between the Cadet and CRK Mnandi.

The blade of the Indian River Jack is a simple drop point pattern. Again, it reminds me of the blade on the Cadet. Just dead simple. In this instance there is a very slight swedge. Still very simple. The blade has a full flat grind with satin finish, and is thin behind the edge. It is a beautiful slicer. Perfect for light tasks like opening mail and cutting up fruit, but certainly capable of tougher chores. It slides through cardboard, cuts rope, and whittles wood with ease.

My version of the Indian River Jack came in CPM-154 stainless steel. As much as I enjoy the charm of the high carbon steel blade on my GEC Viper, there is something to be said for the ease of maintenance of stainless steel. I can ride this knife hard, put it away wet (sometimes literally), and not have to worry about rust or heavy oxidation. I have been guilty of occasionally not cleaning and oiling my high carbon bladed slip joints as well as I should have, and coming back to find the blade covered with rust. Plus CPM-154 is just excellent steel. It takes an edge easily enough and holds it for a long time. Combine that with the super thin geometry of the IRJ’s grind, and you are left with almost unmatchable slicing performance.

Handle, and Ergonomics

The handle of the Indian River Jack is a simple pill shape, with nickle silver bolsters and brass liners. The handle comes in a variety of “covers” (handle scale materials). Mine happens to have jigged bone for the handle material, which is a handle material that I don’t have a lot of experience with. It certainly fits the traditional aspects of the knife. The nickle silver bolsters are highly reflective and lend a touch of class (and extra heft) to the IRJ.

Everything has been riveted together. Fit and finish is pretty good on my knife. The transition between backspring and spine of the blade on my example could be better, and there is a tiny gap between the liners and backspring. But beyond that the pieces line up and the finish work is nice. Given the price I am not disappointed.

In hand the Indian River Jack is a capable little knife. There is no jimping, no finger choils, no lanyard hole, no skull crusher pommel, no rubber inserts, or skateboard tape. Yet still the IRJ seems to work just fine. There is plenty to hold onto and I have enjoyed using the knife for a multitude of basic chores. As with any folding knife, it needs to be treated with care and respect.

While there is no pocket clip to speak of on the Indian River Jack, KnivesShipFree does include a leather slip case with the knife. The leather on the slip case is thick, and carrying the knife in the case is akin to carrying a small secondary wallet. Slip cases prevent the knife from getting beat up in your pocket, and I am a fan of these kinds of cases – especially for dressier pieces like this. It’s a nice touch and a great option for the IRJ, especially if you want to preserve the knife as a collectible.

Walk and Talk

I have disbanded with the usual “Deployment and Lockup” section since this is a slip joint. Instead, lets discuss the “walk and talk” of this modern traditional folder. The IRJ features a slim nail nick to access the blade. It is cut sharply and the knife is easy enough to open and close with two hands. This will never compare with the easy opening of a thumb stud, thumb hole, or flipper, but that is part of the charm of these older patterns.

The backspring on the IRJ is pretty snappy. I won’t proclaim to be an expert on the walk and talk of slip joints, but compared with some of my other slippies, I’d say it’s a on the strong side. The blade opens and shuts with a satisfying snap. There is no hard half stop, but the blade does seem to naturally rest in the half position. There is a little pinch of resistance there as you push the blade open or closed. All said the action on this slip joint is smooth and satisfying.

Indian River Jack – Final Thoughts

It should come as no surprise that I really like the Indian River Jack. The classic design, good fit and finish, and CPM-154 blade all serve to make it a winner in my book. Despite being somewhat rare and coveted, this is still a working knife at the end of the day. It isn’t perfect, but that makes it all the more endearing. Compared with the fancy folders of today, the $130 price tag is relatively modest.

In a way I have struggled to write this review. This knife is understated, but excellent. I wanted to give it the respect and appreciation it deserves without being over the top, because doing so would be incongruous with the knife. But maybe I should be over the top. This knife is worthy of the praise.

For those on the quest for the “perfect EDC knife”, the Indian River Jack could be a contender depending on your preferences. If you are like me, and gravitate towards small sleek knives for daily carry, then the IRJ checks a lot of boxes. Perhaps the limited availability is the biggest detractor to the IRJ. You have to scour the secondary market or keep an eagle eye on KniveShipFree (the only purveyor of Northwoods Knives) for when they get new shipments in. Regardless, the IRJ makes my list of best EDC knives. Highly recommended for fans of minimalist and traditional folding knives.

Indian River Jack – From $130.00
From: KnivesShipFree

I recommend purchasing the Indian River Jack at KnivesShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Slysz Bowie Review

by Dan Jackson 19 Comments

Last Updated: August 1, 2019
An often enjoyed pastime of production knife collectors is to discuss various “Sebenza Killers” arriving on the market. The Sebenza has long been considered a gold standard in high end production cutlery, and the thought that a competitor might knock the Sebenza off it’s podium has been a topic of conversation for some time. The Bradley Alias might be the most notable knife to get bandied about as a “Sebenza Killer,” and there have been several others over the years. But 25+ years later the Sebenza is still going strong, and there seems no end in sight to its reign.

Buy the Spyderco Slysz Bowie at BladeHQ

Buy on Amazon

Ironically, the rise of titanium framelock flippers (something Chris Reeve Knives doesn’t have an answer for) has collectors moving on to other topics, and the thought of a “Sebenza killer” suddenly seems less relevant than it once did.

Still, it’s interesting to think of knives that may stack up to the Sebenza, and as I admired my Slysz Bowie I couldn’t help but draw several comparisons to the Sebbie. Designed by Polish knifemaker Marcin Slysz, the Bowie is his second collaboration with Spyderco, with the Techno being his first.

The Techno met the market with great reviews, and remains a highly regarded production piece. The Bowie is a bigger offering. While quirky like the Techno, the Bowie has its own more business-like character. The knife is expensive, but begged for further examination. I’m pleased to offer some thoughts on the Slysz Bowie after an extended period of carry and use.

General Dimensions and Blade Details

The Slysz Bowie has an overall length of 7.79″, a 3.42 blade, and weighs 4.3 ounces. The knife is manufactured in Taiwan. Depending on your preferences this could make a good every day carry piece. This is what I consider to be a medium sized knife, and it sits between the large and small Sebenza. Of course if you are looking for something smaller the Techno, also designed by Polish knifemaker Marcin Slysz, could be more your bag. I have never stressed out over blade to handle ratios, but I can’t help but feel like there is a lot of excess handle on this knife, and there is something a little funky about the proportions of the Slysz bowie.

As it’s name suggests, the Slysz Bowie features a clip point blade. This is more of a non-traditional bowie with an elongated clip, and rounded spine. The rounded spine is a lovely detail, and is one I don’t recall seeing on a Spyderco before. The blade has a full flat grind and it is very thin and slicey. The finish is a stonewash that was first taken to a high polish. The blade is still highly reflective and mirrors whatever you hold it up against. I liken it to the finish on my Fantoni CUT Flipper. Clip points have always been a very practical blade shape, and this version provides a good balance of tip strength and fine piercing ability. The cutting performance is also very good.

Spyderco went with CTS-XHP, the same steel on the original Techno. I have had a good deal of experience with CTS-XHP using the Domino. Having been a fan of that steel on the Domino I immediately put the Slysz Bowie to work. This knife is a hoss, and easy handled cardboard boxes, a rope cut test, and some woodwork in addition to regular EDC chores. CTS-XHP holds a nice edge but I especially appreciate this steel’s ease of sharpening. I have yet to have any problems with rust or corrosion with CTS-XHP and so far the Slysz Bowie has been no different.

Handle, Ergonomics, and Pocket Clip

The handle of the Slysz Bowie is comprised of 2 contoured titanium handle slabs. The gentle radius of the handles is a nice touch, and it seems like that is how they were able to keep the edges crisp without the knife feeling too blocky in hand. Construction is top notch with matte gray hardware (including an oversize pivot) and a substantial black G10 backspacer. I know that the bright blue backspacer of the Techno was a favorite feature of many. Personally I prefer the more subdued appearance of the black backspacer. The backspacer is jimped in 2 places and protrudes ever so slightly from the handle scales. The light chamferring to the corners of the backspacer give it dimension and detail that belies its plain black appearance.

The titanium handle slabs have been given a heavy stonewashing. The stonewash supplies the slightest amount of texture to the handles. It also makes the Slysz Bowie very easy for me to cram into my pocket without agonizing over it inviting scratches like a freshly waxed Porsche parked too close to a grocery store. Compared with the Rubicon (another recent Spyderco release) the Slysz Bowie practically begs for use.

The Slysz Bowie feels pretty good in hand. There is a run of Sebenza like jimping along the spine, as well as the backspacer, and the good size handle accommodates my larger hand well. Although no efforts have been made to round the edges of the handles, the contoured titanium makes up for it slightly. The knife is fine for normal use, but I would reach for a fixed blade if I had an extended heavy duty cutting chore. The Slysz Bowie feels capable in forward and reverse grips and handles like a well-balanced medium sized folder should.

The Slysz Bowie takes advantage of Spyderco’s wire clip. It should be no surprise to regular readers that this is one of my favorite clip designs. It’s very discrete and the Slysz Bowie all but disappears into the pocket. The handle is tapped for ambidextrous tip up carry. The knife carries very well being relatively slim and relatively lightweight considering that it’s a decent sized full titanium framelock folder. I will say that I did have issues a couple times with my pants pockets binding up on the lock spring cut out on the handle when I tried to draw the knife.

Deployment and Lockup

Being a Spyderco, this knife gets opened with its thumb hole. This is a generously sized thumb hole that is easy to access with your right hand and opens smoothly and quickly with a satisfying “thwack”. The phosphor bronze washers are very smooth and the detent is tuned to where you can easily flick the knife open but you don’t need to worry about the blade falling out of the handle.

Unfortunately, us lefties are left out in the cold. Just like with the Techno, this knife is difficult to open with your left hand. It’s not impossible, but you can’t enjoy flicking the knife open like you can with your right hand. That’s a shame because part of the appeal of Spyderco is their (usually) ambidextrous designs. I’ll stop whining as I understand that 90% of the people reading this are right handed, but I gotta “keep it real” for my fellow lefties.

For lock up we have a classic titanium frame lock, or a Reeve Integral Lock (RIL) as Spyderco likes to call it. This lock does not benefit from a steel insert like some of Spyderco’s other framelocks, and my knife locks up pretty late (around 75%). That said, its a very sturdy lockup and there is no blade play in any direction. There isn’t any blade stick either. Blade centering on my example is absolutely perfect.

Spyderco Slysz Bowie Review – Final Thoughts

The Slysz Bowie is a hell of a knife, and I imagine if Spyderco released it either a few years ago or for $100 less, it would have made huge waves in the production knife scene. As it stands, it’s a beautiful knife and a solid performer. I pictured it next to my American Lawman for a reason – the Slysz is meant to be used. But I think that the $320+ price tag will scare many folks off. And the absence of a flipper, bearings, steel lock insert, and big name American designer doesn’t give it that “gee whiz” factor that seems to drive a lot of consumer attention these days.

I have justified expensive knives in the past. They are luxury goods. People buy them because they want them. Still, I think a discussion on price is appropriate here. Personally, I bought mine used for $230, and at that price I was willing to check it out. For $300 it was just too rich for my blood. While I could somehow justify paying full retail for the Rubicon, I could not do that with the Slysz.

Here is a shot of the Slysz Bowie next to another hard working knife, the Cold Steel American Lawman:

I am more than a little surprised about the price of this knife, especially since the Farid Mehr K2 is a bigger titanium frame lock, has an equally exotic steel, is also made in Taiwan, and has a MSRP of a full $100 less than the Slysz Bowie. I’ve since learned that the reason for the price difference is largely due to the 3-D machined handles of on the Slysz Bowie and the polished and stonewashed blade. Whether these features are worth the $100 difference is up to you.

The Slysz Bowie is still pretty far off from what a Sebenza costs (currently $410 for a Large 21), so if Spyderco truly had a “Sebenza Killer” in mind, at least it’s almost $100 less. In many ways I like the Slysz Bowie more than a Sebenza. I prefer the full flat grind, superior blade steel, 3-D machined stonewashed handles, thumb hole, and better action. When you consider the value proposition, maybe the Slysz Bowie is priced appropriately after all.

If you can swallow the price tag, or can snag a good deal on it, this is an awesome knife. I am not ready to declare the demise of the Sebenza, but this is still a damn good knife.

Spyderco C186TIP SLYSZ Bowie Folding Knife, Titanium, 3.42-Inch

Plain sharp edge
7.79 inches overall length
4.37 inches closed length
3.42 inch blade length
Titanium handle

I recommend purchasing the Slysz Bowie at Amazon or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated – thank you very much!

Shirogorov 95t Review

by Dan Jackson 12 Comments

I have had folks occasionally confess that they live vicariously through my reviews of high end pocket knives. I have handled some nice stuff over the years, but for the most part my wallet and I have been able to resist the renaissance of mid tech and custom knives. This is despite the deluge of eye candy on Instagram, which seems to suggest that everyone acquires $750+ knives and $100 titanium bottle openers at the same rate I buy a loaf of bread and some eggs at the grocery store. Well, I finally gave in, joined the masses, and grabbed this Shirogorov 95t.

Buy the Shirogorov 95t at BladeHQ

But this didn’t happen overnight. I have lusted after a Shirogorov for several years before eventually getting one. I actually had the chance to buy one directly from the maker at the 2014 Blade Show. I was one of the few to get their ticket called in their lottery. The problem was the knives started at $1,000+, which was more than I was willing to spend. I scored this gently used 95t off the forums while recording an episode of Gear Geeks Live.

For those unfamiliar with the maker, Shirogorov is a Russian knife company operated by the Shirogorov brothers. There isn’t a ton of info on the company (at least in English), but this is a growing manufacturer focusing on high end production and custom knives. They might be categorized as pioneers in the recent trend of high end production knives coming out of Russia and Asia. They are known for sleek designs, fanatical attention to detail, and exceptional fit and finish.

The 95 is one of their more popular models, and the 95t is a full titanium handled version with their signature “turtle” pattern (hence – a 95 “t”). This review has been a long time coming, and I’m pleased to finally be able to share some thoughts on this exclusive knife.

General Dimensions and Blade Details

The 95t has an overall length of 8.75″, a 3.75″ blade, and it weighs 5.2 ounces. This is a large knife, and is not well suited for my style of every day carry (EDC). To me this is more of a self defense knife or large utility knife. Given how expensive it is, it has largely remained a collectible for me, but I did carry and use it a little. Mostly for purposes of putting this review together.

The 95t’s drop point blade is about as simple of a shape as you can get. Just 3.75 inches of flat ground and lightly tumbled steel. Of course, the devil is in the details, and the 95t has some nice ones on its blade. The edges have been slightly chamferred up by the jimping and the plunge lines are very clean. I wasn’t able to examine the factory edge on this particular knife (the previous owner attempted to sharpen the knife on a [easyazon_link asin=”B006WRH198″ locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Wicked Edge[/easyazon_link]), but as it stands it cuts very cleanly. The finish is very fine and the knife glides through cardboard.

My 95t came with Elmax steel for the blade. Elmax is a higher end stainless steel by Bohler Uddeholm. Shirogorov offers the Model 95 with several other blade steels as well, including S30V. I’ll be the first to confess that this 95t has not been a real heavy “user” for me. First of all, at $700+ I have plenty of less expensive knives to beat up on, and secondly, with a near 4″ blade the 95t is well outside my normal range for daily carry – even on evenings and weekends when I’m not working in an office. I will say the 95t tracks through paper effortlessly, and opens boxes with the best of them. Anecdotally, the full flat grind and finely finished blade seemed to aid with slicing performance.

Handle, Egonomics, and Pocket Clip

The 95t has a full titanium handle. As previously mentioned, this particular model has Shirogorov’s signature “tortoise shell” design carved into it – hence the 95t. The handle really is a thing of beauty. The titanium has been masterfully milled. The edges are contoured and the single stand off is sunk into the titanium frame. There are a number of nice details to explore, from the “channel” behind the flipper tab for your finger to fall into, to the polished edges of the custom hardware. Speaking of custom hardware, while the slotted hardware is pretty, it easily mars if you try to adjust the pivot or remove the clip. The titanium itself has been given a thorough tumbling. This helps hide wear and contrasts nicely with the bright stainless blade and accents.

The 95t is a large folding knife and it feels very good in hand. There are no sharp edges to speak of, save the cutting edge of course, and the simple handle shape allows your fingers to fall in place. There is a short run of jimping on the spine which reminds me a little of a Sebenza, but isn’t quite as sharp. The turtle pattern provides some additional traction without being overbearing, and the stonewashed titanium has a texture of its own. This simple handle will fit most people well.

The pocket clip is a 3-D machined piece of titanium, and is a miniature work of functional art in its own right. Drilled and tapped for right side tip up carry only, the clip compliments the lines of the knife. It also works well, affording secure and reasonably deep carry. The pommel just peeks out over your pocket when in place. The 95t is a large knife, but carries nicely considering. It has some heft to it, but isn’t over the top heavy. It carries well for its size.

Deployment and Lockup

The 95t flips fantastically. While it isn’t as much of a rocket launcher as the Zero Tolerance 0454, it’s still a pretty damn good flipper. The action is crisp and the blade kicks open easily with the push of a finger. My particular knife runs on a single row bearing system, however, I know that Shirogorov also offers knives in a fabled multi row bearing system (MRBS). I have never handled one of their MRBS knives, so I can’t comment on that feature. I can say this single row bearing knife is very smooth. The blade shoots open and falls closed easily.

For lockup we have a frame lock with a steel insert. Lockup is early and extremely solid. There is no play in any direction, and the lock is easy to disengage. Blade centering is perfect.

Shirogorov 95t Review – Final Thoughts

I have had the privilege of checking out some damn cool stuff over the years. So far I have largely resisted the temptation to venture in to mid tech and custom knife territory, but the Shirogorov was too hard for me to resist. I am very happy I got a chance to check this knife out. It’s beautiful and amazingly well executed. Every aspect of the knife has been meticulously considered, and the end result speaks for itself. This is one heck of a knife, and if you have the money and desire to own one, I do not think you will be disappointed.

Here is a shot of the 95T next to another beautiful knife, the Fantoni CUT Flipper:

I won’t deny that this is an expensive piece. I am unsure what these retail for exactly, as they don’t stay on the retail market for long. I would guess anywhere from $750 to $1000. Either way you are paying a lot of money for this knife. So certainly this is not a knife anyone “needs”. I’ll never be able to answer for you whether it is “worth it”. Only you can make that decision. When I compare the 95t to a large Sebenza or a Hinderer XM-18, I think you are getting something more for your money. I’d have a hard time deciding between this and the ZT 0454, but I think the 95t is made just a little bit better.

I usually sell off many of the expensive knives that land in my collection. I’m not made of money and I need to do this to check out new stuff. I have been sitting on this 95t for at least 6 months now. I think the fact that I have stalled writing this review for so long says a lot. I am having a hard time letting it go, and just might convince myself to keep it. As someone who has had a lot of knives pass through his hands that’s about as glowing of an endorsement as I can offer.

Shirogorov 95t
From: BladeHQ

Occasionally Shirogorov knives find their way to BladeHQ, and I recommend purchasing them there. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 485 Valet Review

by Dan Jackson 16 Comments

Last Updated: February 2, 2019

2013 and 2014 marked pretty quiet years for Benchmade. Not a whole lot of interesting stuff rolled off their shelves. The Volli was my favorite and has proven itself to be an excellent knife. Beyond that there wasn’t a whole lot to report.

Buy the Benchmade Valet at BladeHQ

Buy on Amazon

Benchmade’s 2015 SHOT Show releases actually looked pretty strong. The 485 Valet was one model that caught my eye. Perhaps most surprising was that the knives became available about a week after the show. Gone are the days of lusting over pre-production tools at SHOT only to find them released sometimes years later. Initially I was going to hold off on acquiring a Valet, but all it took were a couple positive affirmations from Tony regarding his knife and I had a Valet en-route to my office.

General Dimensions and Blade Details

The Valet has an overall length of 6.69″, a 2.96″ blade, and it weighs 2.18 ounces. The knife compares favorably to the Benchmade Mini Griptilian although it’s much sleeker. The low profile handle and spear point blade were innately appealing. This is a slim every day carry (EDC) piece that easily doubles as a gentleman’s folder with a more modern flair.

The Valet’s packs plenty of cutting edge, a high flat grind, and a sturdy tip all into a sub 3″ blade. The blade is ground thin and it almost cuts like classic slip joint (not a bad thing). I had no trouble zipping through boxes, bags, and all the little stuff that comes across my path. Everything from sliding between the folds of an envelope free a cable bill to de-boning chicken thighs for a stir fry.

Benchmade went with Bohler M390 stainless steel for the Valet. I have been putting M390 through its paces between this Valet and my ZT 0620. Heat treated to 60-62HRc, M390 is a super steel with superior edge holding abilities, yet it is still easy to maintain. I have been putting the Valet through it’s paces, and I’ve been happy with the results. I sliced up a big stack of cardboard in an informal “cut test” and managed to wear the edge down a bit after a while. I ended up sharpening the knife on the fine stones of my Sharpmaker. After just a few passes I could tell the edge was coming back, and I was able to quickly restore the edge to hair shaving, paper slicing performance. M390 is also very corrosion resistant.

M390 is apparently very expensive (on a podcast Tony and I determined that it appears to sell for 3x as much as a more normal steel). Given the option I would have selected a S30V or 154CM version if it meant a substantial reduction in purchase price, but I appreciate that Benchmade is interested in offering a premium product.

Handle, Ergonomics, and Pocket Clip

The Valet has a sleek gray handle with smooth G10 over milled out stainless steel liners, and a gray G10 backspacer. Handle construction is typical Benchmade quality. The G10 is contoured (3D machined) has been nicely finished. The steel liners are flush, and the backspacer sits solidly in the middle. I like the gray. It’s different, but nothing crazy. This isn’t a big handle, but it’s well made.

The Valet is a small knife and it feels like a small knife. I’m able to get a full grip on it, but there isn’t much room beyond that. It’s perfectly fine for little EDC tasks. There is no jimping, or much in the way of notable ergonomic features. The little knife sits in your hand well enough, and is more than adequate for normal use. I did not find the smooth G10 to be “slippery” and did not have any issues using the knife normally.

The pocket clip is a nice stainless steel deep carry clip. It buries almost completely into the pocket and is discrete. The handle is drilled and tapped for ambidextrous tip up carry. I like this clip and I think it works well.

The Valet also carries really well. At under 3 ounces and you quickly forget the knife is in your pocket. Perfect as either a discrete primary EDC or a lightweight backup knife.

Deployment and Lockup

This is an axis lock knife, with thumb studs. Usually, that would be all I need to hear, but I am concerned that this time Benchmade may have tried to do too much with too little. The positioning of the thumb studs and axis lock feels cramped. The axis lock is smaller than on other axis lock knives, and the thumb studs sit very close to the handle. The knife looks cool, and it certainly works, but it isn’t the most comfortable knife to open and close repeatedly. I’ll be curious to see if anyone shares that opinion with me.

Lockup on my knife is good. Out of the box there was a tiny bit of horizontal blade play, and a little more developed after a month of use. Pretty much all of my axis lock knives have a little play in them unless I tear them down and loctite the pivot. I know some people aren’t fans of the axis lock (too many moving parts and small springs to break), but I have always liked them. This one is smaller than I’m used to, but it still works.

Benchmade Valet Review – Final Thoughts

I am a little divided on the Valet. On one hand, it is a really slick little folder. I have been getting more and more into gents folders for daily carry, and visually this one ticks a lot of boxes for me. I like the smooth G10 handles, and the thin flat grind and spearpoint blade are excellent. My knife came well finished, and I didn’t run into any major QC issues that some folks have reported on first run Benchmades.

But a couple things turn me off on the Valet. The fiddly “landing gear” (small thumb studs placed very close to the knife and small axis lock) is my biggest concern. I would not recommend this knife for people with larger hands. I’m not Andre the Giant, but the position of the lock and thumb studs seems too tight for repeated use (or the mindless flicking open and closed of pocket knives while watching TV). Certainly this could be a “Your Mileage May Vary” thing. This is a beautiful knife, but I think BM leaned a little into far into “form over function” territory on this one.

I also think the price is also worth mentioning. $170 is a large sum for a small knife. I would have loved to see the Valet on the tail end of $150, and not on the tail end of $200. I realize that M390 is expensive material, and I think that folks who really appreciate a premium steel will have an easier time justifying the cost. Personally, I am not convinced this steel is worth the extra money.

But I don’t mean to end this review on a down note. The Valet potentially has a lot to offer. If it fits your hand well then there is little left to complain about. The Mini Griptilian is still my go to small Benchmade, but the Valet could be a worthy upgrade if it fits your hand and budget.

Benchmade - 485 Valet Knife, Drop-Point Blade, Plain Edge, Gray G10 Handle

HIGH-QUALITY: The M390 premium stainless steel blade offers exceptional cutting ability, wear resistance, and corrosion resistance. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The 485 is a manual knife that can be opened and closed with one hand.
COMFORTABLE: The 485's lightweight design and contoured handle make it comfortable to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Valet 485's drop-point, utility blade style and all-around functionality make it ideal for everyday carry and use.

I recommend purchasing the Valet at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.