Knives By Purpose

Kizer Feist Review

Last Updated: July 13, 2019
The Kizer Feist is a knife that I’ve wanted to check out since seeing it in the 2017 catalog. At first, I almost missed it: it’s seemingly such a plain design that my eyes slid right over its page, and it was only during a follow-up perusal that I noticed it was a front flipper. Internally, that changed the design from “plain” to “minimalist.” Maybe a silly distinction on my part, but that was the train of thought.

Buy the Kizer Feist at BladeHQ

No products found.

Unfortunately, the first run of Feists had issues. Some customers complained of gritty actions and stiff lockbars, so Kizer put a hold on production until they could fix those issues in the now-released second run (with the help of the designer, Justin Lundquist). Between the risks of buying a first generation model and the speed with which the second run sold out, I never had a chance to pick one up.

Luckily, someone offered to trade me their Feist a few months back, and I’ve been carrying it frequently ever since. Incidentally, that person is Tony Sculimbrene of Everyday Commentary. His review of the Feist was published back in September 2017, and I recommend checking it out. This is a rare occasion where two people review not only the same design, but the exact same knife. [This happens to be a high quality unit from the first production run, for the record]. On the whole we’ve come to similar conclusions, though I think I’m a bit more taken with the Feist than he is.

General Dimensions and Blade Details

The Kizer Feist is a relatively small knife. It features a 2.875” blade housed in a 3.625” handle, and measures in at 6.55” overall. At 2.68 ounces it’s also pretty light. Numbers never tell the whole story, but I’m impressed by the size of the blade they manage to fit into the handle. The attention to detail is similarly impressive: the blade is perfectly centered, has a rounded spine, a curved plunge line, and a very attractive stonewashed finish. It also bears mentioning that the sub-3” blade of the Feist is legal to carry in a wide array of jurisdictions.

In addition to falling into my favorite size range, the Feist also features one of my favorite blade shapes. The modified drop point (especially this iteration of it) is far and away the most useful profile I’ve encountered for everyday tasks. It is comparable to the blade of the Viper Dan 2, or (if that’s too esoteric a reference) an ordinary paring knife. There’s enough belly to handle a picnic lunch, but not so much that the blade will slide out of prolonged cuts in, say, cardboard.

I have to admit that after reviewing the Alter Ego I was more than a little concerned about how the Feist would be ground. I needn’t have worried. Not only does the Feist have thinner stock (.12” thick as opposed to .14”), but the dished grind nearly reaches the spine of the blade, making for a much keener knife overall. As the picture below suggests, it didn’t cut the apples as cleanly as a paring knife, but it didn’t split them, either. It’s not perfectly ground – there’s a hair of wobble along the plunge grind – but that’s a fairly minor detail, and it doesn’t impact the cutting performance.

Crucible’s S35VN is a common choice for Kizer, so I wasn’t surprised to see them implement it on the Feist. That’s not to say it’s a bad choice, mind: S35VN is well regarded for its edge retention, rust resistance, and general toughness, especially compared to its predecessor S30V. I’ve sharpened the Feist once in two months, and truth be told it didn’t need it, I just wanted to polish it up a little. As always, regular stropping is recommended.

Handle, Ergonomics, and Pocket Clip

Simplicity is a wonderful thing. There is nothing extraneous to the Feist’s handle: no scallops, no inexplicable bumps or angles, just plain, contoured titanium. The only concession to vanity is a decorative pivot screw, but even that can be turned with an ordinary torx driver. Flaws would stand out on a design as simple as this, yet the handles are symmetrical, clean, and blemish free. The matte finish Kizer put on the Feist adds a bit of grip and contributes to the spare design language.

The themes that make the Feist’s handle visually appealing also make it incredibly practical. There is not a single line that forces the user to hold it in a particular fashion. Combine that, the excellent contouring, and a balance point just shy of the overtravel stop and you get a remarkably deft and responsive knife. There is no flipper tab, finger choil, or jimping that will stop your fingers from sliding onto the blade though, so be careful.

The Feist features a milled titanium pocket clip that’s mounted for tip-up, right-side carry. Unfortunately, that’s the only position to attach a pocket clip unless you want to modify the Feist or find someone who can. It’s fine as far as milled clips are concerned. The edges on it are buffed enough that it doesn’t generate a hot spot, and it has some (though not much) spring tension. Stowing and retrieving the Feist wasn’t an issue in jeans, work pants, or gym shorts, but for some reason I needed to use both hands to clip it to the pocket of my slacks. I honestly couldn’t tell you why.

Once stowed, the Feist is an excellent pocket companion. It’s lightweight, slim, fairly short, and has contoured scales to boot. There’s enough tension in the clip that it doesn’t shift in the pocket, regardless of what pants I wear. The clip leaves just under half of an inch of the handle exposed. An over the top style clip wouldn’t be unwelcome, but I’ve found the Feist discreet enough for my needs.

Deployment and Lock-Up

One of the reasons I really wanted to check out the Feist was because of its deployment method: the front flipper. Unlike traditional flipper knives (part of my brain is screaming as I type that), front flippers don’t have a tab that’s pulled to deploy the blade. Instead, the rear tang of the blade is elongated and machined to add a bit of grip, which in turn gives the user’s thumb enough purchase to pop the blade open. It’s a very elegant choice, and eliminates problems like accumulating gunk and snagging threads that other deployment methods are subject to.

Unfortunately, this new flipping has a learning curve to it, and Kizer’s execution of the front flipper was less than perfect. Many customers complained of gritty actions, which made opening and closing the knife more difficult. Apparently (and this is secondhand knowledge, so take care) the internal stop pin wasn’t press fit but left free floating, and that was responsible for the grit. If you own a first generation Feist, don’t worry: Kizer is running a redemption program where you can exchange it for an updated model. My review sample hasn’t exhibited this problem: the pivot is reasonably smooth, the detent is crisp, and deployment is easy, though there is a trick to it. Instead of trying (and failing) to describe how to use a front flipper, here’s a video that may help:

Once deployed, the Feist’s blade is held in place by a titanium frame lock. This particular lock features a stainless steel lock face, an inclusion that should be the industry standard by now. Not only do they reduce the need for maintenance, they also make it easier to service the knife, and thus prolong the life of the tool. Furthermore, it’s easy to incorporate a hidden overtravel stop into these inserts, which is exactly what Kizer did.

The lock’s performance has been excellent in the two months and change that it’s been in my possession. There is no blade play, no lock rock, and it consistently engages around 40% of the blade tang. Thanks to some careful machine work from Kizer, there’s enough room for my thumb to access the lock, and the internal edges are chamfered for comfort. Some users have reported overly stiff locks, but this seems to be limited to models from the first run. As before, mine has no problems.

Kizer Feist Review – Final Thoughts

Overall, I’m very impressed by the Feist. It’s a practical, elegant design that matches my needs perfectly, whether I’m in the field, the office, or enjoying a day off. That its debut was marred by reports of shoddy manufacturing is a shame, but by all accounts the second run has none of the problems of the first. The only cross-generational complaint is that the milled clip is a bit stiff, but that’s far from a dealbreaker, at least for me.

Unless you find a sale, the Feist costs around $170. That price bracket has some pretty stiff competition, including the Benchmade G-10 Griptilians, the Spyderco S110V Paramilitary 2, and the Zero Tolerance 0450. I wouldn’t turn my nose up at any of those, but for my money I’d rather have the Feist. Its unique, refreshing, and hopefully a sign of more to come from designer Justin Lundquist.

There are a few people that may want to steer clear of the Feist. Firefighters, EMS workers, law enforcement, and military personnel might find that the design is ill-suited to their needs. The design cues that make the Feist a fantastic everyday carry knife also make it a less than ideal rescue or ‘tactical’ knife. However, if – like me – your needs are fairly simple, and you’re just looking for a pocketable, elegant cutting tool, I think you’ll be more than happy with the Kizer Feist.

Next up: the Prometheus Lights Beta QR V2 in brass.

Kizer Feist – From $168.00
From: BladeHQ

Editor: I recommend buying the Kizer Feist at BladeHQ or Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

ESEE Expat Cleaver CL1 Review

by Travis Pike 2 Comments

Gripping the Esee Expat Cleaver leaves you feeling a little overwhelmed. You’re filled with the sudden urge to cleave things. There is something about its weight, its grip, and the fact you just know it can slice through most anything. It’s hard to put into words.

The Esee Expat Cleaver is the first in the Expat line of knives and tools. The knives are inspired by Esee forum member and world traveler ‘Expat.’

Buy the ESEE CL1 at BladeHQ

Buy on Amazon

Expat travels the world doing what I assume are fun and interesting jobs in dirty places. He has served as an instructor with Randall’s Adventure Training, Esee’s parent company. He’s an experienced outdoorsman, and his series looks to be an exciting development. The Expat CL-1 Cleaver is a beast of a tool and its design details are subtle. It’s more versatile than it looks.

Don’t call it tactical. It’s not designed to be a weapon, and it’s not for mall ninjas. It’s primarily designed for food prep in the wild. In a pinch it can be used to do some moderate chopping and campground clearing. However, at the end of the day this is a tool for food prep. Calling this tactical is like calling a mess kit tactical.

The Esee Cleaver is designed to take your meal from barely dead to ready to cook. It’s there to clean and dress animals as much as it is to prepare them for the skillet.

Esee is well known for their brand of survival knives and tools. Dan has reviewed the Esee 3 and Chad has reviewed the Esee 4. I personally own an Esee 4, and the Esee Advanced Survival Kit.

Esee designs the knives, but most are built by Rowen Manufacturing in Idaho. This explains the cutout of Idaho at the top of the Cleaver.

General Dimensions and Blade Details

The CL1 is made in the USA. It has an overall length of 11.5″, weighs 25.5 ounces, and has a 5.5″ blade. Speaking of blades, this one is massive. The cutting edge is 6 inches long, while the blade is 3.125 inches wide and .19” thick. It weighs a mighty, Mjolnir-like, 25.5 ounces. You can really feel the heft in this blade and it’s a good feeling. The cleaver sports a full tang construction with a black stonewash blade.

The finish looks amazing and serves a critical purpose. The blade is made from 1095 carbon steel. It’s easy to sharpen and holds a nice edge, but it also tends to rust. Esee is up front with this. They clearly state that it’s your responsibility to bust rust and keep the blade clean.

The only portion that will rust is the actual unfinished cutting edge. A light oil coating, and ensuring the cleaver is cleaned is important.

Side note – Since this is a tool designed for making food you really don’t want to slap petroleum based oil like CLP on it. I like Citadel Black’s food safe knife oil for this one.

If you look closely you’ll notice the blade isn’t fully square. The edge rounds towards the “tip”, and that provides some belly. This gives the cleaver a little more versatility and makes it more than a chopper. The rounded edge makes it useful for skinning game and detail work. You can also make fine and accurate slashes through meat with the CL1 like a kitchen knife.

That rounded edge also allows you to ‘rock’ the cleaver to cut through veggies with ease like a kitchen knife. Without a doubt a kitchen knife would be better, but kitchen knives are made for the kitchen. The Expat Cleaver is made for the adventure.

The pommel has a slightly extended tang designed for small crushing tasks, and it’s outfitted with a lanyard loop. A cleaver is meant to chop, and when chopping it’s important to be able to keep the cleaver in your hand. The lanyard hole makes it easy to tie the cleaver to your wrist when chopping. This way you walk away with all your toes.

Handle and Ergonomics

The Expat Cleaver features the same handle as the Junglas. However, unlike the Junglas the handles on the Expat Cleaver are made from G-10 rather than micarta. G-10 is a proven handle material that’s resistant to the harsh nature of the great outdoors. Environments with moisture, heat, and questionable cleanliness aren’t an issue for it. This peel-ply G-10 is also grippy, so the cleaver stays put in the hand. This is important for a tool that’s doing chopping work.

The G-10 grips are mated perfectly to the tang and are completely flush. Three massive Allen head screws hold the grips in place. Even after months of use they haven’t loosened.

The grip features an excellent wave that gives you a nice and comfortable grip. The bottom and top of the grip are curved to keep your hand centered and provide a comfortable pivot point. The handle on the Junglas is a known quantity, and it was a no-brainer to bring the design over to the CL1 Cleaver.

The handle is also a fat bottom girl and fills my XL paws nicely. The wide grip really helps disperse the shock of hitting something hard over and over. The shock travels throughout the entire handle instead being focused in one area. This reduces fatigue and prevents pain.

Sheath

“Sheath” is a bit of a generous term here. The Esee Cleaver comes with a leather blade cover, but I wouldn’t call it a sheath. It simply goes over the blade and protects it from you and you from it. Personally, this isn’t a big deal to me. This isn’t a tool you carry on your belt for immediate use. The cleaver is kept in the pack until it’s needed.

The blade cover is made from a tough leather that secures via a simple button. For what it’s worth, it looks nice. I would have liked to see some type of tie down point. This would be handy to make sure the leather cover isn’t lost when the tool is used in the wild. If I could tie it to the pack I keep the cleaver in, I’d be good to go.

ESEE CL1 Cleaver Review – Final Thoughts

Even after owning the Esee Expat Cleaver for months I still get excited when I pick it up. I’ve used it lop the heads off fish, cut branches down, and chop up meat, veggies and more. Something about its size and weight makes it a blast to use. I find myself finding excuses to use it when cooking. Do I really need a cleaver to cut up chicken breast? No, I don’t, but I like using it.

ESEE Knives Expat Knives Black G10 Handle Cleaver CL1

ESEE Expat Knives Brand, MADE IN THE USA
Overall Length: 11.5", Maximum Width: 3.25", Thickness: 3/16"
1095 Carbon Steel Blade, Weight: 25.5 ounces
Finish: Tumbled Black Oxide, Handle: Black G10
Leather Sheath Included

I recommend purchasing the ESEE CL1 Cleaver at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Editor’s Note: Please join me in welcoming Travis Pike as a new contributor to the site. Travis has written in the guns, gear, survival, and self-defense realm for years, and is looking to expand his writing to include his interest in knives. In addition to writing for years he is also a United States Marine infantry veteran, so he has plenty of real world experience. I think he’s going to bring a very practical approach to his knife reviews. Plus, you know he has excellent taste when his first review is of a cleaver. Welcome Travis!

Microtech Sigil MK6 Review

by Dan Jackson 7 Comments

There is depth to the knife industry. So much depth that a reviewer can review knives for 5 years, hire on 3 other writers to review knives, amass a catalog of over 300 knife reviews, and still not review knives from all the major manufacturers. That’s case with this website and Microtech at least. It’s almost shameful that we haven’t reviewed anything by Microtech yet. Thankfully, that gets remedied today.

Buy the Microtech Sigil at BladeHQ

Microtech is a medium sized knife manufacturer located in Bradford, PA. The company was founded in Vero Beach, FL in 1994, by Anthony Marfione, but then moved to Pennsylvania a decade later. As a Florida boy I have no idea why they would pack up and move to PA after 10 years. Usually it’s the other way around. There must be a lot of steel up in PA.

Microtech is known for their automatic knives, and their aggressive designs. Maybe that’s why it took me so long to buy one. I’m not a huge fan of autos, believing that a good manual folder can be almost as easy to operate, and less likely to draw the ire of law enforcement. Plus, their styling is the equivalent of Affliction shirts for the cutlery industry. Shockingly, a Microtech was the 3rd knife Jim Skelton ever reviewed. And it was from the “Zombie Tech” series at that. There is a lid for every pot.

Aesthetic preferences aside, the blades are also pricey. Not that price has stopped me from reviewing a knife in the past. I just gotta get a good deal on it, or really want to check out the knife. Plus the recent ugliness with the Tony S. lawsuit didn’t rev me up about the company either. I have wanted to check their knives out, but something else always took priority.

That all changed when I picked up this Sigil MK6. What a cool knife. This Sigil is beautifully built and richly detailed. Whoever designed it clearly had a lot of fun. My version is the “Apocalyptic” flavor, with a full stonewash and copper accent piece. Lets dive in.

General Dimensions and Blade Details

The Sigil has an overall length of 8.75″, a 3.75″ blade, weighs 5.2 ounces, and is made in the USA. This is a sizable knife. It’s a bit more than I typically like to EDC, but it provides plenty of canvas. Microtech took advantage of this and covered every inch in ornamentation.

The floor to ceiling stonewash lends the knife an aged appearance, although my blade is date stamped “02/2017”.

The blade is a long, sloping, modified drop point. The tip is dropped low, and you only get a slight amount of belly. The tip is also fine and delicate. The blade shape and thumb cutout resembles a prehistoric bird.

A lot of attention went into this blade, and the machining is top notch. The thumb hole has a series of steps milled around it. The finger choil is delicately chamferred. The flipper area has been pocketed. The grinds are beautiful and even. The edge has been uniformly applied. No detail has been overlooked on this blade.

And the blade is made of M390 stainless steel. M390 is about as good as it gets in blade steel, exhibiting the enviable combination of high edge retention paired with easy sharpening. Most super steels are a bear to sharpen, but M390 isn’t bad. It’s one of my favorite blade steels and Microtech gives you almost 4 inches of it here with their Sigil.

Cutting performance is pretty good. The stock on this knife is relatively thick, and the partial flat grind has its geometric limits. Still I had no problem breaking down boxes, opening mail, and cutting fruit. The M390 held up like a champ.

Handle, Ergonomics, and Pocket Clip

The handle is a celebration of milling, and a thing of technical beauty. Microtech is a highly skilled manufacturer, and that comes out clearly in the handle of the Sigil. The titanium handle slabs have been meticulously tooled from all angles, to the point where this knife could pass for an extra on the Dark Crystal.

You can become lost in the complexity of the Sigil. The insides have been pocketed out to lighten the knife. There is also extra fine milling for the frame lock release, the hardware for the pocket clip is hidden, a full titanium floating backspacer, and a copper pivot shroud doubles as a lock bar stabilizer. Microtech’s trademark proprietary hardware holds it all together.

Speaking of the proprietary hardware, although a lot of people aren’t a fan of non-standard hardware, I think it adds something to the overall effect of the knife. It’s totally different and helps make the Sigil feel special. That said, it would have been great if they included a tool. Actually came loose a couple times. Keep in mind I got this knife gently used, so this isn’t a comment on how it came from the factory. I was able to tighten everything down with my finger nail, but this is far from ideal. Thankfully the pivot feels snug and I haven’t had to mess with it yet.

The simple handle shape and heavy chamferring of the titanium handle makes the Sigil a comfortable knife in hand. That should come as no surprise give how large this knife is. There is a small forward finger choil giving you extra options, but I find it to be a little tight relative to other knives with finger choils that I own. I’ve used it, but would advise against getting too aggressive with this finger choil. Good jimping is found on the thumb ramp, flipper tab, and backspacer. Although it lacks corrugated G-10, this isn’t a slippery knife by any means.

The pocket clip is made of milled titanium. Milled clips have done a bit of an 180 over the past few years. When they originally came out they were the bee’s knees. Then they sort of fell out of favor when people found them to be less effective than traditional stamped steel clips. I still like a milled clip if it’s done right.

I’d say the clip on this Sigil is pretty good. It is snug up against the handle and has some spring tension. It’s not crazy spring tension, and I wouldn’t recommend jumping out of an airplane with the Sigil clipped to your pocket, but there is spring tension and the knife is held in place in your pocket. The hidden hardware aspect of it is awesome, and the machining is top notch.

The Sigil carries about how I would expect. It’s a large full titanium folder. Not a total boat anchor, but you feel its presence in your pocket.

Deployment and Lockup

The Sigil is a flipper on bearings. Flipping action is excellent. The generously jimped flipper, strong detent, and smooth bearing system scores the action of this knife a solid “8” on my somewhat arbitrary 1-10 scale for flippers. Better than average, but not a rocket launcher. In addition to the flipper there is an elongated thumb hole. It’s fully functional and you can open up the blade with the thumb hole if you want to be more subtle.

For lockup we have a titanium framelock with stainless steel lockbar insert. The engineering wizards at Miroctech did a fine job designing this frame lock. It is totally secure, with no blade play to speak of, yet the lock is easy to disengage. This is thanks to good lock geometry, and excellent milling on the portion of the lockbar where your thumb goes to release the lock.

As I mentioned previously, there is a copper pivot collar that doubles as a lock bar stabilizer. A nice touch and the only splash of color on an otherwise grey knife.

Here is a shot of the Sigil next to my Paramilitary 2:

It’s a little longer than the Para 2, but you get a lot more blade. Speaking of which, blade centering is perfect on my knife.

Microtech Sigil MK6 Review – Final Thoughts

The Sigil is an impressive knife. Microtech’s styling may not be to everyone’s taste, and this is a bigger knife, but you can’t argue that the Sigil has been beautifully executed with top shelf materials.

Almost every bell and whistle you could ask for is included. A milled clip, milled out handles, floating back spacer, hidden hardware, top shelf blade steel, and tons of machining. Fit and finish is outstanding. And this knife is made in the USA.

My only gripe is that the body screws come loose and they don’t supply the tool to tighten them.

This isn’t an inexpensive knife, but for just under $400 I think you get what you pay for. It’s almost on par with my old Shirogorov 95t, and that knife clocks in at 200%+ of the cost. Any interesting comparison is with a Sebenza.

While this is far from being an everyman’s EDC, I think those whose interests are piqued by the concept of the Sigil will be happy with this knife. It exceeded my expectations, and it makes me want to review more Microtechs in the future. Speaking of which, I really like the Sebastian Benja designed Stitch. I think that will be my next acquisition.

I know the Sigil is not a knife for everyone, so I won’t give it a blanket endorsement. But I give it 2 thumbs up if you are already in the market for this knife.

Microtech Sigil – From $390.00
From: BladeHQ

I recommend purchasing the Microtech Sigil at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Hogue X5 Review

by Dan Jackson 2 Comments

Last Updated: August 5, 2019
The button lock flipper is an intriguing concept. The fun of a flipper paired with a sturdy button lock sounds great in theory. We have reviewed a couple, namely the Spartan Pallas and Freeman 451. Ben reviewed the Freeman, and he reported that the flipping action was good, but the flipper on my Pallas left a lot to be desired. That’s because no one has been able to recreate the ball detent action that you find on a liner lock or frame lock knife that puts the “flip” into a flipper. That is, until Hogue released their X5 flipper.

Buy the Hogue X5 at BladeHQ

Buy on Amazon

Designed by Allen Elishewitz, and modeled after his Black Dolphin custom offering, the X-5 is a button lock flipper that has flipping action that will rival any framelock flipper. In fact, the action is so good you may mistake the X5 for an assisted opening knife.

When I first saw the X5, it was the wharncliffe version. I don’t mind wharncliffe knives, but this one was a little too odd for me to want to buy. The spearpoint version reviewed here has beautiful symmetry. I picked one up as soon as I could find a nice deal on one.

General Dimensions and Blade Details

The X-5 comes in 2 sizes: a larger knife with a 4″ blade, and a smaller version with a 3.5″ blade. I opted for the 3.5″ version, which has an overall length of 8.25″, and a weight of 4.62 ounces. The X-5 is made in the USA. I’d like to mention that this knife is beautifully made just like all the other Hogue knives I have reviewed. The fit and finish is immaculate, complete with a mirror polished edge. From a manufacturing standpoint this is a top shelf knife.

I like the look of this spear point blade. The harpoon knives the knife some attitude, and it compliments the shape of the handle. Allen Elishewitz is among the best knife designers I have met, and this X-5 puts his talents on full display. At any rate, the blade features a simple high flat grind, a neat swedge and a fine tip. There is a slight amount of belly. Nothing crazy, but the edge is one continuous curve. This blade has been given a matte black Cerakote finish. They offer this knife without the coating if you prefer uncoated blades.

Once again, Hogue selected CPM154 as blade steel for this knife. That’s the same steel they have in all their folders, so at this point I have plenty of experience with CPM154, and Hogue’s version / heat treat in particular. This is a great steel that provides easy sharpening and good edge retention. I’ve had some issues with 154CM staining in the past, but obviously this coated blade is not going to rust at all.

In practice the X-5 cuts nicely. I had no problems breaking down boxes, opening mail, and using the X-5 for other EDC related tasks. The tip is servicable, the belly is nice, and the grind is thin enough to cut things. The knife came with a beautiful edge which I have maintained through regular stropping. The Cerakote has also held up OK. It will burnish and wear with use (you can see some of that wear on my EX-04 below). As far as coatings go it’s pretty robust but not as good as DLC. Overall I have no complaints regarding the performance of this blade.

Handle, Ergonomics, and Pocket Clip

The X-5 handle is made of 2 pieces of hard anodized aluminum with textured G-10 inlays. Again, the handles here are beautifully machined. I would not be surprised if Hogue won Blade Show’s manufacturing quality award one year. Details include a vented spine, custom pivot and hardware, an integrated lanyard hole, and body screws on only one side of the knife. Everything oozes quality and attention to detail.

The handle on the 3.5″ version of the knife feels a little cramped. I can get a full 4 finger grip on the knife, but it feels like my pinky is going to slide off the back. Adding to things is the inclusion of an aggressive finger choil that limits your hand placement options. This is probably my biggest gripe with the knife. That said, the handle certainly works and I’m sure the 4″ version will be more accommodating to larger hands. Part of what I enjoy about this knife is the unique aesthetic, and I’m willing to sacrifice a little for the sake of this unique design. However, this is coming from a guy with a 100 pocket knives. If this was my only EDC knife I’d want something with milder ergonomics.

The pocket clip is a deep carry affair, blacked out and swappable for ambidextrous tip up carry. Retention is extremely tight. Pants shredding tight. There is no way this thing will fall out of your pocket, but that’s provided you can actually get this ting into your pocket in the first place. I find the spring action of the clip to be too tight. I’m also not a huge fan of the large tip of the pocket clip that is exposed when this knife is clipped into your pocket. It will scrape car doors if you aren’t careful. I know folks have been critical of the large spoon clip in the EX series, but I think I prefer it over the clip on this X-5.

The X-5 is light for its size and carries easily enough. The nice thing about a matte black deep carry clip is that it makes for a discrete knife. This 3.5″ version is an easy EDC for me, but I would like to see this pocket clip tweaked a little bit.

Deployment and Lockup

The X-5 is a flipper. That should be pretty obvious. There are no thumb studs, thumb holes, or secondary means of opening the blade. That’s alright because the flipping action is outstanding. Like I mentioned in the introduction, the button lock flippers I’ve handled in the past haven’t flipped well. That’s because they never were able to recreate the detent action of a linerlock or frame lock flipper. The X-5 does that by embedding a ball detent into the handle. This YouTube video does an excellent job showing you what is going on. A ball detent is set into a stainless steel spring inset in the handle, and there is a hole and track on the blade for the detent to run in.

The end result is fantastic flipping action – to the point where you may mistake this for an assisted opening knife. But it’s not an assisted opener, and one way you can tell is by depressing the button lock: the blade swings freely. It’s also worth noting that there are no stand alone washers on this knife. Instead, the washers are milled into the aluminum handles. The end result is buttery smooth.

The button lock has been beautifully executed. There is no stick at all in my lock, and lockup is tight as a drum. There is an external safety. Typically I’m not a fan of these, but Hogue has dialed this in so the action of the safety is crisp and purposeful. Unlike most knives with secondary safeties, it doesn’t flop around, and you aren’t going to accidentally activate it on the X-5. While I don’t use it, I like how they did it.

Centering is dead nuts perfect.

Hogue X5 Review – Final Thoughts

All said I’m a fan of the X-5. Hogue makes a beautiful knife, and the X-5 may be the nicest model I’ve handled yet. And they have cracked the code for a button lock flipper. The flipping action is flipping outstanding. That alone earns some points in my book, and I hope Hogue applies this technology to other knives, or licenses it to other companies. I also happen to be a fan of this design. I find it visually appealing and the execution is top notch. For these reasons I appreciate and enjoy the X-5 as a knife collector.

That said, there are a couple issues with the knife that prevent me from giving it a perfect score (not that I really score anything on here anyways). First, the handle is cramped. This knife is not going to replace my Griptilian or other work knives any time soon. I could have gotten the 4″ version, but I usually don’t like to carry folding knives that large. Second, the pocket clip is too tight, and the tip of the clip pokes out too much. It shreds your pockets, is a chore to use, and the tip sticks out to the point where it can inadvertently scrape up cars if you aren’t careful. As a fan of the design, the ergonomic issues are forgivable, but I still think the pocket clip needs work.

So this isn’t a perfect knife, but for me the pros outweigh the cons. I have plenty of plain Jane pocket knives, but nothing else like the X-5 in my collection.

If you are looking for one Hogue knife to use as your EDC, I’d recommend the EX-01 or EX-04. They are more practical and more comfortable work knives.

But if the X5 speaks to you as a collector and enthusiast, then I’m here to tell you to answer the call. It’s mostly an awesome knife. Not my desert island EDC, but there is a lot to enjoy with this one. And like the EX-04, I don’t see myself offloading my X-5 any time soon.

HOGUE X5 3.5" Spear Pants Black Frame Stock Accessories

Great Product

I recommend purchasing the Hogue X5 at BladeHQ or Amazon. Thanks for checking out my review.

CRKT Pilar Review

by Benjamin Schwartz 13 Comments

For a long time, I didn’t really ‘get’ CRKT. When I first got interested in knives, the company was well behind the curve. It seemed stodgy, outdated. Companies like Spyderco and Benchmade opened my eyes to what a modern pocket knife could be; CRKT just confirmed the pedestrian image I had of knives before I became a nerd about them. My only CRKT purchases were the requisite Drifter and a secondhand Tribute that I paid too much for.

Buy the CRKT Pilar at BladeHQ

Buy on Amazon

This was back in 2012ish, and I don’t think my dismissive attitude then was totally unwarranted. But when CRKT had its renaissance a year or two later, turning to collaborations with trendy designers to give their lineup a shot in the arm, I continued – wrongly – to ignore them. Probably this renaissance coincided with the height of my own knife snobbery. I was laboriously ascending the ladder of production knives, one incrementally more expensive purchase at a time, and didn’t think I’d ever want to come back down.

But this year, my and CRKT’s wavelengths aligned – I finally understood the appeal of what it does. There is huge merit in putting out really good designs in universally affordable trim. It doesn’t move out of this zone – like, at all – but I would argue it owns it. Even other makers that trade in the affordable knife market lack either CRKT’s sheer range, commitment to price point, or both.

The Pilar, undisputed star of CRKT’s 2017 lineup, seems to embody all of the company’s strengths. It seemed like the perfect knife to reacquaint myself with CRKT, so I picked one up. It’s an intriguing, fun knife, but does it measure up as a tool? Let’s take a look.

General Dimensions and Blade Details

The Pilar has a blade length of 2.4” counting the choil, and an actual cutting edge of 2”. The handle is 3.5” long, and its overall length is 6”. It weighs 4.2 oz. and is made in China.

I’m going to spend some time discussing the appearance and style of the Pilar. While normally (and rightly) secondary to a knife, they’re a central part of the Pilar. Its very best qualities are intangible, non-performance things and it would be a disservice to the designer not to talk about them.

So, yeah: this is a great looking design from Jesper Voxnaes. His tamer designs don’t move me, but when he cuts loose and gets a little weird I’m interested. One thing I wonder about is whether designers save their “best” designs for high-end collaborations. In this case, though, there’s no question Voxnaes gave CRKT A+ material to work with. Swap out the low-end materials for ritzier ones and the Pilar could be a GiantMouse or Viper release without missing a beat. It’s fun to look at, fun to hold, and fun to use. There’s a reason the Pilar is all over social media. It’s a gear geek’s knife, a knife nerd-seeking missile. Quirk is our catnip and this one has character for days.

The Pilar’s blade shape is a combination between a cleaver and a wharncliffe. As an all-purpose EDC tasker I find it adequate, never inspiring. There’s an ergonomic issue that plays into this (see below), but the blade presents two issues of its own. The first is length – there are common chores that the Pilar’s blade won’t be big enough to accomplish. This wouldn’t be a huge sticking point, but at 4.2 oz. I really think we need more utility. A lack of an acute tip also hurts. Opening bags or clamshell packaging, you’re going to have to fiddle with the Pilar to align its snubby tip where you want it.

I think we need to start considering 8Cr13MoV an unacceptable choice for EDC steel. Yes, it is easy to sharpen, but so are all bad steels. Edge retention is poor, and it discolors and smudges with any contact with skin. My prediction is that we’re about a year or two away from either CTS-BD1 or 14C28N becoming the default budget knife steel – and that day can’t come soon enough, because I’m done with 8Cr13MoV.

Handle, Ergonomics, and Pocket Clip

If you count the half-and-half choil, the Pilar is fully 2/3 handle – and I’m not complaining. The thick scales are made from a lightly textured stainless steel, held together with an aluminum backspacer. The entire handle has been given a generous chamfer, addressing virtually all potential hotspots

At the risk of splitting hairs, there are two major ways in which a knife can be ergonomic: 1) is it comfortable to hold? and 2) do the ergonomics facilitate actual use of the knife? The Pilar excels at the former and somewhat flubs the latter. When you look at a picture of its handle, you think “Yes.” When you buy one and hold it you think “YES.” But then you use it and think, “Oh. Hm.”

The problem is, the choil puts your forefinger right up against whatever you’re cutting. There’s no ‘dead zone’ between the end of the choil and the start of the cutting edge. Your knuckle drags across cardboard as you slice it. Cut up an apple and you’re going to have to wash your hands afterwards. With only 2 inches of cutting edge, you really need to be able to leverage every last centimeter, and the interplay of the finger choil and the cutting edge makes this hard to do.

Although configured solely for righties, the tip-up/tip-down pocket clip is straightforward, unobtrusive, and durable. One nice detail is that it is set into a cutout, eliminating side-to-side wiggle. But yes, 4.2 oz. is way too heavy. Weight distribution can make heavy knives seem reasonable, but when you have a blade this compact, those four full ounces have nowhere to go. In lighter clothing like shorts it felt like I had a hockey puck clipped to my pants. Often it was easier to carry it loose in my pocket. This knife should have had a G-10 front scale.

Deployment and Lockup

CRKT and Voxnaes buried the Pilar’s thumb oval as far down as they could while still making it accessible for both right- and left-handed people. It works well, flicking out with ease and not so detent-heavy as to make slow-rolling impossible.

The no-fuss deployment works alongside a well-executed stainless steel frame lock. Engagement is comprehensive, with nearly the entire lock face meeting the tang and no play in any direction. Bonus points for the stylish little cutouts on the lock bar for disengagement – they look cool and work well.

One issue of note here is the slickness of the scales. The Pilar is a small knife, and when closing it there really isn’t anywhere for your fingers to go. The barely-there texturing on the scales makes finding reliable purchase difficult. Glaringly unsafe? No, but annoying – and again, a G-10 scale would have fixed this.

CRKT Pilar Review – Final Thoughts

I have to applaud CRKT for this knife. With a design this good, many other companies would succumb to the temptation to bedizen it with all sorts of trendy features and materials, and price it in the $150-$250 range. This is clearly their best design of 2017 and it isn’t even the most expensive.

And yes, this knife cries – sobs, even – for a material upgrade. Me, I’d like to see a minor upgrade to G-10 scales, a liner lock, and CTS-BD1 steel. But the tradeoff with the current materials is that CRKT priced the Pilar at a stunningly low $25.

So check it out. It’s a deeply cool knife that I enjoyed reviewing, even when it wasn’t performing as well as I hoped. At $25 I can give it an unreserved recommendation.

CRKT Pilar EDC Folding Pocket Knife: Compact Everyday Carry, Satin Blade with Finger Choil, Thumb Slot Open, Frame Lock Stainless Handle, Reversible Pocket Clip 5311

Ambidextrous: Thumb slot allows blade opening with either hand
Classy Appearance: Satin finish blade has a modern look
Brute Strength: Frame lock utilizes a thick lock bar to secure the blade
Designed by Jesper Voxnaes in Loegstrup, Denmark
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend purchasing the CRKT Pilar at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco P’Kal Review

by Chad McBroom 4 Comments

The word pikal (also spelled pakal) is a Visayan dialect word that literally means “to rip.” In the Filipino martial arts, the name is generally used to describe the method of holding a knife in a reverse grip (aka ice pick grip), but more specifically denotes a reverse grip with the edge inverted, facing toward the user. The Spyderco P’Kal is a specialized folding knife designed specifically for reverse-edge knife tactics.

Buy the Spyderco P’Kal at BladeHQ

Buy on Amazon

The P’Kal was designed in collaboration with Craig Douglas, a career law enforcement officer, life-long martial artist, and the founder of ShivWorks. Douglas, also known as “SouthNarc,” is a huge advocate of reverse-edge knife tactics and has collaborated on several method-specific knife designs, including another Spyderco knife, the Spyderco Reverse.

Unlike the traditional use of a blade where the edge is facing outward and is driven by “pushing” motions using the smaller muscle groups located in the front of the upper torso, reverse edge movements are driven by ”pulling” motions using the large muscles located in the back. These techniques are point-driven. The result of the pikal method is a penetrating stab that creates a deep laceration as the blade is pulled (ripped) out of the target.

General Dimensions and Blade Details

The P’Kal has a fully flat ground, 2.95” (75 mm) modified Wharncliffe style blade. The leading edge of the Wharncliffe blade design only amplifies the ripping qualities of the P’Kal, since the energy applied during the cut is transferred toward the tip.

The blade is constructed out of 0.125” (3.2 mm) CPM S30V stainless steel. Crucible Steel Company’s proprietary powdered cutlery steel is one of the best knife steels on the market with its high corrosion resistance and edge retention capabilities. It is one of my personal favorites, especially for a purely defensive blade.

When closed, the P’Kal is 4.40” (112 mm) long, making it an excellent size for Every-Day Carry (EDC). Weighing in at just 3.7 ounces (105 grams), the added weight of the P’Kal is hardly noticeable when carried in the front pocket.

Handle, Ergonomics, and Pocket Clip

The P’Kal has a black G-10 handle with reversible steel wire pocket clip that can be mounted on either side, allowing the user to opt for an edge-forward or edged-back carry configuration. The tension on the clip is very tight out of the box, but loosens up to be just right with a little use. When seated in the pocket, the knife rides just high enough to allow the use to gain a firm purchase on the handle for rapid deployment.

The handle is extremely comfortable when held with either a forward or reverse grip in the intended reverse edge configuration. The addition of a secondary finger notch on the edge side of the handle (which doubles as a cutaway for the thumb hole) allows for comfortable use with a traditional edge-outward grip. At first glance, this notch appears to be located too far back on the handle to be practical; however, once you get the knife in your hand, you quickly realize that it is placed in exactly the right position given the blade and handle geometry.

The liner has 1.5-inches of aggressive jimping along the portion that make contact with palm. This jimping, which extends just past the G-10 scales, coupled with the rough texture of the scales themselves makes for an exceptional gripping surface that works even when wet.
Unlike fixed-blade knives that can be designed with a more neutral grip, folders are more limited due to the blade folding into the handle. It is a rare thing to find a folder that works well in every grip. If you keep in mind that the P’Kal is a fighting knife made for use with a full-hand grip, then you will find the design works for multiple grip configurations.

Deployment and Lockup

The P’Kal has a removable post-style Emmerson Wave feature for rapid deployment. The recommended carry method is tip up at the front of the pocket. When carried in this configuration, the knife can be simultaneously opened on the draw stroke by hooking the post on the front of the pocket. When gripped properly, the knife can be rolled into the pikal grip position immediately after opening. Of course, the blade can also be opened manually using the Spyderco’s famous round thumb hole. When using the thumb hole to deploy the blade, the handle geometry ensures that you will find yourself with a natural reverse-edge forward grip upon lockup.

The ambidextrous caged Ball Bearing Lock located behind the tang is one of Spyderco’s strongest locking mechanisms. This unique, patented locking system has a ball bearing that sits inside a slightly curved channel which provides a track for the bearing. The ball bearing is pushed toward the blade by a small shaft that is surrounded by a coil spring. As the blade rotates open, the ball bearing pushes past the detent and into the new channel to lock the blade in position.

Since the ball bearing rolls freely throughout the blades travel, the action on the P’Kal is very smooth and the lockup is firm every time. My knife was very tight out of the box, to the point where I would have multiple failed wave deployments. This was a problem that needed to be fixed because I do not wish to lose any fingers from a blade collapsing on my hand. After applying some Nano-Oil and working the blade a couple hundred times in hopes that it would loosen up, I went to the tool box and grabbed a hex wrench. I loosened the pivot pin screw ever so slightly, which immediately resolved the problem.

Spyderco P’Kal Review – Final Thoughts

The Spyderco P’Kal is in my opinion one of the best purpose-built defensive blades on the market. As a big proponent of reverse-edge knife tactics myself, I see tremendous value in the P’Kal as a dedicated defensive blade and cannot recommend it highly enough for such a purpose. It have become my go-to EDC folder.

One of the benefits of the P’Kal is the availability of a training version of the knife. Even though the cost for the trainer is right up there with the cost of the live version, I can’t stress the importance of the trainer enough. It is an investment that will have a far greater return if you dedicate yourself to putting in the training hours.

When choosing to carry a specialized knife like the P’Kal as a self-defense tool, it is important to seek out proper instruction from a qualified edged weapons instructor. For those who may not have access to an instructor, there are other alternatives. Craig Douglas has two excellent DVDs on the ShivWorks Reverse Edge Methods if you can find them. Scott Babb of Libre Fighting also has a newly released DVD titled, “Reaper Method – Tredecim” which covers his approach to rapid knife deployment / employment (think in terms of the Japanese art of Iaido) using a reverse-edge (scythe) grip. Both men take different approaches to reverse-edge knife tactics, but they each present valuable information on the topic.

Spyderco P'Kal Specialty Knife with 2.95" CPM S30V Stainless Steel Reverse Edge Blade and Black G-10 Laminate Handle - PlainEdge - C103GP

P'KAL: "Pikal" is a devastatingly effective system of Filipino martial arts tactics. It is also the inspiration for the Spyderco P'Kal folding knife.
Ball Bearing Lock: This lock features a patented compressive lock that wedges a ball bearing between a fixed anvil and the blade tang. The mechanism also serves as a detent to hold the blade in the closed position.
Emerson Opener: This features a small integral hook on the spine of a knife's blade that catches on the edge of the pocket as the knife is drawn. The hook pivots the blade into the open position.
Full-Flat Grind: This knife features a blade ground with flat bevels that extend from the spine all the way to the cutting edge. This grind reduces drag during cutting and decreases overall weight.
Specifications: Closed Length (Inches): 4.4, Overall Length (Inches): 7.35, Blade Length (Inches):2.95, Blade Steel: CPM S30V, Grind: Full-Flat

I recommend purchasing the Spyderco P’Kal at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.