Knives By Purpose

Spyderco Polestar Review

When you have a thing as simple and relatively unchanging as a folding knife, the most meaningful innovation we customers can see is quality brought to affordability. A few years ago my sincerest wish for the knife market was that manufacturers would turn their attention away from the high-end and back to the sub-$100 arena.

Buy the Spyderco Polestar at BladeHQ

Buy on Amazon

In a way that wish has been granted, albeit in a mild monkey’s paw scenario. The value scale has not so much been reset as it has been smashed to pieces, shattered by products and practices we wouldn’t have even thought of in 2010, blinded by our Tenaciouses. Companies like Real Steel are pumping out affordable knives with great materials and low price tags. Steel Will, Ontario Knife Company, and even knife world-adjacent companies like Statgear have laser-focused on delivering major bang for buck. And on top of all this, Kickstarter and Massdrop allow for small runs of finely made knives with premium materials at two-figure prices.

The problem is no longer a lack of value knives, but rather a surplus of such richness that it’s difficult to identify the real winners amid the churning ocean of contenders. Going knife-by-knife would be a full-time project, so we have to pick and choose – and so I started with Spyderco.

I’ve already talked about the Chaparral FRN, but after that I wanted to go lower on the price scale. This naturally lead to the Polestar, a sub-$100 Sal Glesser design. Where does this Sal Glesser design fall in terms of quality and worth? Let’s take a closer look.

General Dimensions and Blade Details

The Polestar has a 3.3-inch blade, a 4.5-inch handle, and an overall length of 7.81 inches. It weighs just under 4 oz. and is made in China.

There’s something distinctly old school about the Polestar. With its homely lines and wide profile, it looks like one of those lumpy, charming Spyderco designs from the 90s. At the same time it comes across as a more refined Tenacious: skinnier, with a streamlined handle and narrower blade. Given its price, however, the more relevant comparison lies with the Delica and Endura. It falls between the two of them in edge length but is wider than either.

Do we call this a leaf shape blade? Whatever it is, it works wonders. I’m by no means a full flat grind zealot, but Spyderco has a particular mastery of the form. Here the full flat grind enables this medium-sized knife to slice aggressively and cleanly, while still imparting a feeling of durability and sturdiness. The closest analog I can draw is the Paramilitary 2. If you like the way that knife cuts, you’ll find a lot to love on the Polestar too.

The Polestar’s BD1 steel places ahead of the 8Crs and AUS-8, and keeps a significantly cleaner edge than either, even as it dulls. This makes it a viable cutter even at greater levels of wear than its competitors, which often get toothy and uneven as they work. BD1 also shrugs off both rust and staining/smudging.

We’ve seen S35VN and D2 at shockingly low price points recently, but if I had to forecast what will be the next de facto budget steel, CTS-BD1 (and its successor CTS-BD1N) get my vote. CTS-BD1 is a hassle-free steel anyone can manage.

Handle, Ergonomics, and Carry

Before I held the Polestar myself, I wondered if it would be all that comfortable. I shouldn’t have worried: the Polestar feels 100% like a Spyderco. Like all of their best handles, it feels like it’s rushing to meet your hand as you close it around the knife. Despite the plain appearance there are some super thoughtful touches. A dip just behind the thumb ramp accommodates the lower part of the digit more comfortably than a straight line would. An area around the pivot curves inward, creating a pinch point between your thumb and forefinger for detailed, high-control cuts. The Polestar is an unmitigated success in the ergos department.

Carry… well, not so much. This is a wide knife. At its widest point it’s about 1.5 inches across, and unlike other wide Spydercos it maintains most of the width for its entire length. I wouldn’t classify it as an unforgivable pocket hog, but you’re going to notice this one anytime you reach into your pocket, and it probably isn’t a great carry for shorts or slacks. There’s also an inch or so of knife that sticks out during carry; in the tip-up configuration, you get a massive lanyard hole and the Polestar’s little tail out for all to see.

These issues combine to be, for me, a nearly fatal flaw. During the testing period I often just didn’t feel like carrying the Polestar because I had so many other knives, some with equivalent (or greater) blade lengths, that took up significantly less pocket space. On the bright side it’s a thin knife across the spine, thinner than a Tenacious.

The pocket clip is that stalwart standby, the Spyderco spoon. It’s the right choice for this knife, keeping the Polestar in place as you walk. It’s also four-way positionable, so both righties and lefties have a second configuration if the default one irks them too much.

Deployment and Lockup

The Spyderco Round Hole plus phosphor bronze washers is rarely a bad combination, but it isn’t always a fast one. Depending on the lock and structure of the knife, you might have to slow-open whether you want to or not. My Polestar, however, does not present that problem. Its medium-strength detent allows for thoughtless flicking, but it isn’t so jumpy that you can’t roll it out if you want to.

One note: the overall fit and finish on the Polestar were great, but the detent ball did rub harshly against the tang as the knife opened. If I was slow rolling, it made a hoarse, scraping noise. A dab of Nano-Oil on the detent ball fixed this problem, making for a smooth, silky deployment.

I don’t think a lot of people associate Spyderco with liner locks, even though the Military, one of their classics, is a liner lock knife. In fact, according to Sal Glesser, the Polestar idea originated as a concept for a smaller Military designed for the Boy Scouts to use. With this in mind, you can see that influence in the larger-than-normal cutout to access the locking leaf. I thought I wouldn’t like this but over time I got used to it, and I never accidentally disengaged the lock even when gripping the knife hard. And regarding strength, I never lost confidence. The entire locking face contacts the tang, and there is not a smidge of play in any direction. You won’t ever have an issue with this knife during regular use.

Spyderco Polestar Review – Final Thoughts

The Polestar is a good knife. I like it, but I like it more than I’ll carry it, and much more than I can recommend it.

It comes down to that teeming body of sub-$100 offerings right now, and where this knife falls into that ocean. The Polestar goes for about $64 as of April 2018. That’s only $10 cheaper than a Delica or Endura, two knives that it doesn’t beat out in any category, and loses to in several. And it’s only $15 dollars cheaper than the FRN Chaparral, the best knife money can buy for under $100.

Part of what made the Tenacious such a success was its original $35ish dollar price point. Few people would’ve picked it over a Delica or Endura if they cost the same, but access to that Spyderco smartness in a cheap package was an unbeatable combo.

The Polestar is a better knife than the Tenacious, but it doesn’t enjoy the added edge of a good price. Compared to Real Steel’s myriad offerings, or Steel Will’s Cutjack line, it has an unimpeachable Spyderco design pedigree, but it’s also pricier. You’ll have to decide how much more you’re willing to pay for that pedigree – and again, if you are willing to pay for it, you may as well drop another $10 and grab a Delica, Endura, or Chaparral FRN.

A truth is that we, the consumers, don’t really get to know what goes on to get a knife made. We can guess, but until companies become more transparent that guessing will remain a fantasy, not particularly helpful. But I will say that it’s a shame the Polestar isn’t cheaper. Alongside its little brother the Alycone it could have been a real highlight, a great design and value. But with that awkward price I can only unreservedly recommend it if you aren’t interested in the Chaparral FRN, Endura, Delica, Cutjack, the RAT 1 or 2, the Skyline, or virtually anything in Real Steel’s lineup.

Sale

Spyderco Polestar Value Folding Utility Knife with 3.33" CTS BD1 Stainless Steel Blade and Durable Gray G-10 Handle - PlainEdge - C220GPGY

A Value Folder: Spyderco offers a unique breed of knives that truly live up to their name. They are perfect for novice knife buyers and as gifts for those you might want to "convert" into knife enthusiasts.
Superior Blade Steel: The heart of the Polestar is its full-flat-ground 3.33" blade, which is precision machined from American-made CTS BD1 Stainless Steel.
A Secure Grip: It has a gray scaled G-10 handle with a unique non-slip checked texture. Comfort in hand means easier use long-term.
Easy-to-Use: Its leaf-shaped profile includes a long, exceptionally capable PlainEdge working edge and a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening.
Pocket-Friendly: The Polestar includes a Walker Linerlock and a 4-way pocket clip lets the folder be set in a variety of carry and draw positions: Tip-up/tip-down left-hand/right-hand.

I recommend purchasing the Spyderco Polestar at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel 4-Max Review

by Dan Jackson 8 Comments

This is a knife that requires little in the way of an introduction. The Cold Steel 4-Max is arguably the most overbuilt hard use folding knife of all time. Modeled after designer Andrew Demko’s custom 4-Max folder the 4-Max brings Andrew’s clean design and attention to detail to life.

Buy the 4-Max at BladeHQ

Buy on Amazon

This isn’t your garden variety Cold Steel offering. Built in the USA and retailing for about $400, this high end production offering is for those that want to get as close to an Andrew Demko custom as they can without buying and actual AD custom. I’ve wanted to check one of these knives out ever since they announced the project in 2014. 4 years later and I finally have one in hand.

Will the knife survive the hype? Read on to find out.

General Dimensions and Blade Details

The 4-Max has an overall length of 10.00″, a 4.00″ blade and weighs 10.2 ounces. This is a big honking knife. As you will be able to see in the size comparisons, if the Ultimate Hunter is a great white, then this 4Max is a megalodon. It dwarfs normal folding knives. It’s almost a caricature of a folding knife. It’s massive in every way. Some may view a knife this big as novelty item rather than an EDC. Personally, I like mine for trips to the supermaket and high stakes hostage negotiations.

My 4-Max is made in the USA, but Cold Steel has moved manufacturing over to Italy. They changed the G-10 from the tan shown here to a blue grey on the Italian version. Personally, part of the allure of the 4Max to me was that it was made in the USA. It’s a knife so ridiculous that it almost needs to be made in the USA. Otherwise it’s just an imposter. That said, my research shows the Italian 4Max is very nice, and possibly even a smidge better than this USA version in the fit and finish department.

The blade on this sucker is massive. It’s a simple drop point with a deep belly, high flat grind, and decorative swedge. The grinds are crisp and even. The edge has been evenly applied, although the sharpener did run up onto the choil a little. That seems to be consistent from knife to knife. I’m not a fan of how that looks, and is one of my gripes.

You would think a knife this overbuilt would be a poor slicer, but the 4-Max actually has great blade geometry. It slices beautifully thanks to the high flat grind that gets surprisingly thin behind the edge. I can slice apples like nobody’s business with the 4Max. The tip also displays a good balance between strength and practicality. It’s stout, but isn’t a pry bar either. The knife is fully functional and surprisingly good at performing day to day tasks.

For blade steel Cold Steel went with CPM-20CV. CPM-20CV is Crucible’s answer to Boeller M390. It’s excellent stuff providing a covetable blend of edge retention, ease of sharpness, corrosion resistance and toughness. It’s a high end steel. So far it has done everything I’ve asked it to. Admittedly that has mostly been EDC chores including breaking down boxes, cutting fruit, and opening mail. I’m keeping this knife for long term evaluation and will update this section periodically.

Handle, Ergonomics, and Pocket Clip

The Handle of the 4-Max is G-10 over titanium liners with a titanium backspacer. Handle construction is solid. The G-10 scales have been nicely finished. All the parts line up, and the overall impression is solid.

So far the tan G-10 has held up well. I’m not a huge fan of light colored G-10 as it tends to pick up dirt and stain, but I haven’t had that issue with the 4-Max.

The ergonomics of the 4-Max are excellent. This is a huge knife, so there is plenty of real estate, and Andrew Demko is well known for his simple and ergonomic designs that accommodate a variety of grips and hand sizes. The ergonomic features include a generous forward finger choil, lightly textured G-10 handle scales, and a short run of toothy jimping. The jimping is nice because it captures the pad of your thumb without being overly aggressive.

All the edges of the G-10 have been chamferred. I haven’t noticed any hot spots. The balance point of the knife is an inch or so behind the pivot, so it has a forward heavy feel. It all but begs to be chopped with, an odd sensation from a folding knife. The pommel is large and angular and could be used as an “impact tool” if the need ever arised. The 4-Max is also comfortable in a reverse grip.

Time to talk about the pocket clip. This is a large titanium pocket clip. It allows for right or left side tip up carry only. It’s not a deep carry clip, but it’s oriented so that the knife buries fairly deep in the pocket. Spring retention is excellent.

In practice, this knife carries as you would expect. You need to wear a belt while EDCing the 4-Max, lest you wish to arrive at your destination in just your underwear. It’s big, it’s heavy, and it takes up a ton of space in your pocket. I wouldn’t turn up my nose at a belt sheath for this one.

Deployment and Lockup

The 4-Max makes use of large ambidextrous thumb studs. Quite a bit of travel is required to pop this blade open. Thankfully the going is smooth due to the massive phosphor bronze washers. When you finally maneuver the blade into the open position you are greeted with a hugely satisfying “click”. It’s kind of like closing the door of a German car.

Here is a size comparison with the Cold Steel Ultimate Hunter, a large knife in its own right.

For lockup we have an oversized Tri-Ad lock. It’s got a stop pin bigger than most pivots. Lockup is absolutely bank vault solid. Not a smidge of play here, and according to Cold Steel this lock can handle ungodly amounts of punishment. No complaints with respect to the lock.

Where I do have a complaint is when it’s time to unlock the knife. Tri-Ad locks can have a reputation for being tough to disengage, but this 4-Max takes it to a new level. Not only is a good amount of pressure required to release the blade (understandable), you have to position your thumb dead center on the lock release. If you travel too far forward or back, you won’t have sufficient travel for the lockbar to raise enough to disengage.

Once you get the lock disengaged extreme care needs to be taken with this blade. The spring tension turns the 4-Max into a guillotine of sorts. Care always needs to be exercised when closing a folding knife, but extreme care should be taken with the 4-Max. The combination of strong spring, heavy blade, and razor sharp blade make this one a little disconcerting to use. I’ve never felt nervous closing a pocket knife before, but after catching the edge of my ring finger in this blade I have a new level of respect for the 4-Max. Be careful.

Here is another size comparison with the hugely popular Spyderco Paramilitary 2:

Blade centering is good, but not great on my knife. It’s a mm or so off. No where near rubbing, but at this price point I would obviously prefer something dead centered.

Cold Steel 4-Max Review – Final Thoughts

The 4-Max is the closest most of us will come to ever owning an Andrew Demko custom knife. It was built without compromise, and in that respect the 4-Max is a roaring success. If you are looking for the biggest, baddest hard use folding knife on the planet then I think the 4-Max should be at the top of your short list. It’s beautifully made, and it cuts surprisingly well. And I challenge you to find a more solid folding knife.

My biggest gripe is it’s a tough lock to disengage. Not only is there a lot of spring tension, you have to place your thumb right in the center in order to successfully disengage the lock.

However, if you are looking for anything resembling a practical pocket knife for urban EDC then I think you should look elsewhere. This knife is huge and heavy. No way I would want to carry it around on a daily basis. But it’s a beautiful and unique piece and I appreciate it for what it is.

With the 4-Max, you are either going to love the idea of it or hate it. If you are somehow on the fence about the 4-Max I would suggest picking one up. It’s not cheap, but you get what you pay for.

Cold Steel 4 Max Folding Knife

CPM-20CV Steel
Pocket / Belt Clip

I recommend purchasing the Cold Steel 4-Max at BladeHQ or Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Rike Thor4s Review

by Grayson Parker Leave a Comment

Rike doesn’t enjoy the same name recognition that Reate, Kizer, or WE Knives does. While those companies are easily recognizable as the leading names in the renaissance of Chinese knife manufacturing, Rike is often left out of the conversation. On one hand, that’s perfectly understandable: unlike Kizer, WE, or Reate, Rike hasn’t cultivated much cachet with trendy designers, relying instead on in-house designs. At the same time, they have the same reputation for quality as the others, and an aesthetic all their own besides.

Buy the Rike Thor4s at BladeHQ

To be perfectly honest, I never thought that Rike would produce a knife that’d suit my tastes. Most of their offerings have blades nearly four inches long, which is utterly out of bounds for my line of work. When I saw the specs for the Thor4s, I nearly spit out my coffee. A reasonably sized integral? From Rike, no less? I was intrigued, and luckily, my girlfriend noticed and passed that information along to my family.

It should be noted that this was a Christmas present from my folks, and if ever there was a cause for bias, it’s the knowledge that your family might read every criticism you level at an earnestly given gift. I don’t think this has affected my judgment, but all the same, it’s something you should know.

General Dimensions and Blade Details

The Rike Thor4s is among the smallest knives in my collection, with a blade length of 2.375”, a handle length of 3.125”, an overall length of 5.5”, and a weight of 2.08 oz. To be perfectly honest, I was caught off guard by just how small this knife is; to give you a sense a scale, the box is so small I mistook it for jewelry. The blade is short enough that it’s less than ideal on a picnic, but it’s more than long enough for standard office chores. It also bears mentioning that with a blade length less than 2.5”, it’s unlikely to spook any coworkers.

Despite Rike’s fascination with angles, they chose a simple drop point for the blade’s profile. Were it not for a few issues I’ll bring up momentarily, this would be the utilitarian ideal. Most of the spine’s thickness is brought to the tip, so there’s little concern of snapping the tip off, whether in a fall or a bit of prying. The belly is just wide enough to feed, say, the edge of an envelope into, but not so wide that it’ll slip out of a cardboard box you’re breaking down.

The grind on the Thor4s is immaculate. All the details are perfectly executed: the plunge lines are crisp, the swedge is even, and both the primary grind and cutting bevel are consistent and well finished. Unfortunately, the blade stock is thick enough that all that work at a grinder is functionally irrelevant. It cuts fine, don’t get me wrong, but it’s no slicer. That would normally be a deal breaker, but as mentioned above, it’s too short for most food prep anyway.

This is the first knife I’ve reviewed that has M390 steel, and truth be told I haven’t really put it through its paces. A knife this size is meant for intermittent office use, not breaking down a pallet of boxes. It’s held its edge without chipping or rolling, hasn’t rusted, and responds reasonably well to a loaded leather strop. The high satin polish has a remarkable rainbow sheen that undoubtedly helps with rust resistance.

Handle, Ergonomics, and Carry

Of course, the prime selling point of the Rike Thor4s is its integral handle. For the uninitiated, that means that the handle is milled from a single block of material, which in this case is titanium. It’s an expensive process with few (if any) practical upsides, and most of an integral’s appeal lies in its status as a feat of engineering. Rike’s design language carries this theme to its logical endpoint, as the over-machined aesthetic pushes the Thor4s into “pocketable sculpture” territory.

Overall, the ergonomics of the Thor4s are fine, with the exception of two distinct flaws. The first of those is the butt of the handle, which, as you can see, tapers down to a wide, flaired end that leaves a rather sharp point on either side of the handle. In turn, this generates a slight hotspot when the knife is opened, though not when it’s held normally during use. The second issue is the pocket clip. For what I can only guess are aesthetic reasons, the tip of the clip isn’t rounded, or even squared: instead, it ends in an angular point. Most of the time this isn’t a problem, but every so often it catches on the meat of my palm in an altogether unpleasant way.

Normally knives with questionable ergonomics are also unpleasant to carry, but such isn’t the case here. It’s lightweight, compact, and its ergonomic flaws are only noticeable in the hand. As much as I want to rail against milled pocket clips in general, the spring tension on the Thor4s is quite nice, neither fraying the lip of my pocket nor acting like a hook instead of a clip.

Deployment and Lock Up

The blade is deployed by a well-executed flipper. It’s definitely of the ‘pull’ variety: trying to push on the tab will only leave you with a bruised finger. Instead of washers, the pivot runs on caged bearings, which is to be expected at this price point. The detent is crisp, the action is smooth, and as far as deployment is concerned, there’s not a fault to be found.

Once deployed, the blade is held open by a titanium frame lock that features a stainless steel lock insert. There is no horizontal or vertical blade play, and the lock consistently engages around 30% of the blade tang. The decorative pivot collar also functions as an overtravel stop. This is exactly the list of features I want in an integral frame lock. By contrast, when I was working on the DPx Aculus review, I was always aware that if something happened to the lock, I’d be up a certain creek without a paddle.

Rike Thor 4 Review – Final Thoughts

Overall, the Thor4s is an intriguing – if imperfect – addition to the market. The blade stock is a bit chunky, and the ergonomics a bit pokey, but at heart the Thor4s is an office knife, and as such those two flaws are tolerable. Between the top notch manufacturing, high end materials, and the novelty of a sub-3” integral, there’s more than enough to redeem the design.

It’s difficult to find comparisons to the Thor4s. There are plenty of production integrals, but few at this price point, and none at this size. The Lionsteel SR-22 (when it debuts) will be the next smallest integral that I’m aware of, but even then it will be substantially larger than the Thor4s. If you’re in the market for reasonably sized integral, this is likely your only option.

Next up: the Steel Will Modus.

Editor: I recommend purchasing the Rike Thor4s at BladeHQ or Amazon.com. Thanks for reading!

Great Eastern Cutlery Tidioute 43 Oregon Trapper Review

by Aaron Shapiro 1 Comment

I’ll never forget when my family was cleaning out my late Grandfather’s house after he passed. I found an old band-aid tin that was full of a variety (in both style and age) of small multi-bladed slip joints. They were all he carried and on most of them one blade was worn down to a nub, whereas the rest were shiny and like-new. He was a true EDCer, he didn’t think about the concept of carrying things like I do, he just made sure he had what he needed. A traditional knife was always included.

Buy the GEC Oregon Trapper at KnivesShipFree or GPKnives

Slipjoints, or traditional knives, have seen a bit of a resurgence in the last couple years with the knife community at large. So much so that you see dedicated slip joint knives being made by brands like Spyderco, Benchmade, and Lionsteel.

Great Eastern Cutlery while being relatively new on the slip joint scene when compared with the likes of Queen, or Imperial, have been generating new levels of interest and collectibility with traditional knife collectors since their founding in 2009. They’ve reborn some classic brands such as Northfields and Tidioute and honor a lot of the classic production patterns that have been in pockets for decades. All that to say, today we are going to be looking at the Great Eastern Cutlery Tidioute 43 – Oregon Trapper. Now, before we get too far into this review, I want to be upfront and say that I am not a history expert on traditional knives, so please forgive some discrepancies in that regard. This review will take into consideration actually putting the knife in your pocket and carrying it in your day-to-day life. So, without further ado, some specs:

Blade Length: 3.25”
Closed Length: 4.25”
OAL: 7.5”
Steel: 1095 Carbon Steel
Weight: 3.8oz
Handle Materials: “Frontier Bone” handle scales, I think this is just a form of cow bone, but I’m not sure.

I’ve owned a handful of GEC’s knives over the last few years, even been able to get my paws on some of their much sought after Tom’s Choice (or TC by the cool kids) special factory runs. So, when I got the Oregon Trapper in hand I was struck by one thing right off the bat, this knife is large for a slip joint. I was, obviously, aware of the size when I ordered it. The specs were clearly listed on knivesshipfree.com but it wasn’t until I got the knife that I realized exactly how big it is. Now, depending on where you fall in the slip joint community that could be a good thing, or that could be a bad thing. As a tactical knife carrier in recovery, I dig the larger size. I think it’s easy to feel, “under-gunned,” for some reason when you’re carrying a small slip joint knife by itself, but this Oregon Trapper dispels that feeling.

GEC’s chosen steel is the venerable 1095 high-carbon steel. 1095 is like a bowl of vanilla ice cream when it comes to knife steels. It’s really all ya need, but there’s nothing really special here. It’s high-carbon, so it will take and hold a fine edge very well, but it will also stain and rust if you let it. To add onto that, there is also a whole “sub-culture,” that forces patinas on their blades, and I have to admit, a well-done patina (or a naturally formed one over a long period of honest use) looks really, really nice. The steel thickness on the GEC starts at 0.113” and is ground to a blistering 0.018 before the final edge. There are sharp knives, and then there are “sticky” sharp knives where when you lightly touch the edge your skin sticks to it. This knife is the latter.

Handle, Ergonomics, and Carry

As I stated earlier the handles of the GEC 43 Oregon Trapper are made from a material GEC calls it’s “Frontier Bone,” which is a vaguely frightening term that makes you think of bleached buffalo bones in a sandy Arizona desert landscape, however, the truth is less menacing. Frontier Bone is a portion of light cow bone that’s burnt or toasted, and then polished. I think it looks pretty cool and is generally cheaper and easier to find compared to something like stag or jigged bone handles.

The one catch with GEC’s (and really all traditionals) is that these type of bone handles can vary greatly in thickness. Looking straight down at my example shows that the right-hand scale is slightly concave, whereas the left is convex. So that will always be a gamble with this particular handle material, something like micarta will not have this issue. The handle shape itself is simple, straight back with a slight swell and negative angle at the tail. This allows a solid purchase in hand but doesn’t have any choils or jimps to provide texture.

It terms of carrying the GEC 43, I use a leather pocket sheath. knivesshipfree.com include their own branded buffalo leather pocket slip, that I used for a while. I have a custom pocket slip made by a friend of mine that carries a slipjoint and a Muyshondt Maus. Due to the fact that the knife is a bit larger than your normal slipjoint it may not work with all your carry methods, but it seems to work well with these. I generally suggest some sort of pocket organizer to keep the knife vertical in your pocket, there’s nothing worse than knife sitting sideways in your pocket.

Walk and Talk

Lastly, the action. Slipjoints are measured on a scale of 1-10. 1 being the blade having zero resistance on it from the spring, and 10 being it needs the screaming He-Man strength to open it. Most GEC’s are a 6-7, they have a stronger pull than I like, but are usable and manageable. The Oregon Trapper clocks in at a solid 5, nice and smooth action with a pinch-able blade. I found the walk and talk to be a little spongey, but there is still a good positive half-stop and audible snap when closing/opening. Once opened the knife is solid and doesn’t have any movement side to side. For a production, this is perfectly acceptable.

Great Eastern Cutlery Tidioute 43 Oregon Trapper Review – Final Thoughts

So, would I suggest this to someone else? Sure, if what you want is a larger slip joint that could serve as your only EDC knife. I think the decision to transition from a locking folder to a slip joint as part of your EDC is one that takes some consideration. I would personally say that non-locking folder of any sort is more of a lighter-duty knife. So if you’re in law enforcement, construction, fire fighting, etc – I think that you’d need to think long and hard about what the lack of a lock would mean on your knife.

If you’re like me and you work in an office, and primarily open mail, packages, and cut food with your EDC knife, this is an obvious choice; and a great way to introduce some variety into your EDC rotation. As always our preferred source of everything sharp is either from knivesshipfree.com or bladehq.com both of which have this particular Great Eastern Cutlery 43 Oregon Trapper in stock.

GEC #73 Oregon Trapper
From: KnivesShipFree

Editor: I recommend purchasing the GEC 43 Oregon Trapper at KniveShipFree or GPKnives. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Gerber StrongArm Review

by Travis Pike 6 Comments

One thing I have always had is a healthy respect for is a good fixed blade knife. As a young infantryman I fell victim to some clever marketing from Gerber and purchased the Gerber LMF II Infantry. It had infantry in the name so I couldn’t go wrong right? While I may have been a victim of marketing, I didn’t feel victimized. The LMF II served me well, but everything can be improved. The Gerber StrongArm is in many ways the successor to the Infantry, and is better suited to the infantry role.

Buy the Gerber StrongArm at BladeHQ

Buy on Amazon

The LMF II Infantry has a fascinating story and was built for a very specific purpose you should check out here. That specific purpose resulted in the knife’s lack of a full tang. The Gerber StrongArm resolves this issue. The StrongArm is a little lighter, a little shorter, and is more refined than the Infantry LMF II. The StrongArm is a versatile capable, and affordable knife made in Portland, Oregon.

General Dimensions and Blade Details

The Gerber StrongArm has 4.8 inch fixed blade made from 420 HC steel, is 9.8 inches overall, weighs 7.2 ounces and is proudly made in the United States. This is a classic fixed blade knife that isn’t trying to revolutionize the standard military style survival knife. In terms of fixed blades it’s actually somewhat small. It’s a half inch shorter than the LMF II Infantry, but has an almost identical blade length.

Gerber StrongArm

The knife is easy to carry, and perfect for those looking to trim as much weight as possible from their loadouts. That’s generally the goal of dismounted infantry. Ounces equal pounds, and pounds equal pain.

The StrongArm comes with options for both a serrated or plain edge. I prefer the plain edge. The blade is coated with a cerakote black matte finish. The finish is tough, but will wear with time and effort like any finish would. The 420 HC steel does mean that once the finish is worn away rust may develop. Keep the knife cleaned, and oiled as the finish migrates and you won’t have any issues.

The older FDE StrongArm you see here has been used and abused hard for a year. It’s been hunting, camping and fishing. The knife has been used to hammer, pry, and dig and its taken a few hits to the finish as you can see.

Gerber StrongArm Brown vs. Black

420 HC steel is a cheaper steel, and this is a knife on the affordable side. The downsides to 420 HC is that it won’t hold an edge for long. It’s one of those steels you sharpen before any really heavy duty cutting is needed. For a survival knife you don’t necessarily need a razor sharp edge for day to day work. It stays sharp enough for cutting paracord, stripping wires, and slicing through clothing for some time.

When it comes time to cut through thick materials you may need to run the blade over or through a sharpener a time or two before you go wild. 420 HC steel can actually get impressively sharp if you know your way around a sharpening stone. I’ve never failed to be impressed at how sharp my Dad makes his old Buck knife before skinning a deer and its made from the same 420 HC steel.

Gerber StrongArm Blade

The StrongArm has a squared off spine that’s perfect for stripping bark, batoning wood, striking a ferro rod, and truncating wood. All tasks the Gerber StrongArm can commit to with real force. The StrongArm’s small handguard doesn’t really allow for a thumb on the blade grip so the less comfortable square spine isn’t an issue.

Handle and Ergonomics

The handle on the StrongArm is an interesting design. I do find it slightly smaller than necessary, but to be fair I have XL sized hands. Even with my large hands I still find the grip comfortable. The smaller grip isn’t much of an issue due to its design.

The Gerber StrongArm is glass filled nylon that’s covered with a rubber overmold. This makes the grip ‘soft’ in the hand. Squeezing it tight doesn’t result in much fatigue or pain. The little bit of give the rubber overmold offers results in a lot of comfort. The little bit of give also allows the blade to mold to your hand just a bit.

The rubber overmolded material is coated with a raised diamond textured pattern. This glues the knife to your hand and is perfect for cold, wet, or gloved hands. The pattern is rough, but doesn’t rub the hand raw, or even really create hotspots that I’ve noticed.

Gerber StrongArm in Sheath

The bottom of the handle is a small pommel. It’s a lot smaller than the LMF II, but still capable enough to smash windows and skulls. It’s also got a lanyard loop if your StrongArm needs a leash.

Sheath

We’ll finish this up talking about the brilliant sheath system Gerber included with the StrongArm. It’s designed to be adaptable to the user. Popular knives typically have plenty of sheath options, but with Gerber you are getting all of them with the knife.

Gerber StrongArm Molle Compatible

This includes a MOLLE mount, a drop leg system, and a belt loop option for horizontal carry. The knife is too big for any kind of horizontal concealed carry, but it’s really great for a snag free carry while wearing armor. When you draw from a standard belt carry sheath while wearing armor you are likely to get snagged on your gear in one way of the other. Drawing horizontally from the belt prevents this.

I also like the horizontal belt mount for mounting the knife vertically on my pack straps. This means my knife never leaves the pack I go camping with.

The Sheath employs both passive and active retention depending on the mount being used. The active retention is a simple snap button thong. The passive retention comes from an indent in the center of the handle. The sheath locks into this indent and holds the knife well.

In all my adventuring near and far it hasn’t fallen out when I’m using only passive retention. The sheath is also outfitted with plenty of lashing holes for those who aren’t satisfied with the included sheath options.

Gerber StrongArm Review – Final Thoughts

The Gerber StrongArm is a great little knife, especially when you factor in a street price of around 50 bucks. Gerber’s reputation was hit hard by imports of poorly made foreign knives, but they seem to be working hard to fix that reputation. The StrongArm is proudly stamped made in Portland, Oregon. The StrongArm is one of many made in USA knives in their catalog and likely one that will be around for a long time It’s an excellent budget bushcraft knife.

The StrongArm may not be the LMF II Infantry, but it’s a great knife, and a worthy successor to the LMF II.

Gerber Gear StrongArm - Fixed-Blade Camping & Hunting Knife with Striking Pommel & Sheath - Premium Survival Gear - Black, Plain Edge

Iconic Strongarm Design: This Gerber Gear fixed blade knife features a full-tang, 420HC steel blade with a ceramic coating
Dependable Cutting Knife: Our camping knife boasts a rubberized diamond-texture grip for secure handling
Versatile Knife Sheath: The StrongArm knife includes a MOLLE-compatible sheath for adaptable carry options, ensuring the hunting knife is accessible
Tactical Edge: This fixed-blade knife also features a striking pommel, ideal for survival tasks in the toughest environments

Editor: I recommend purchasing the Gerber StrongArm at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Manly Peak Review

by Dan Jackson 2 Comments

I have a couple Manly knives for you today. That’s not a typo. Manly is a Bulgarian knife manufacturer. More recently they have started distributing knives in the USA through their aptly named Manly USA distributor.

A couple articles on Nemo Knives Review put their products on the map for me, and I quickly became attracted to their spare yet functional designs.

I reached out to their US Distributor, Lubo, and and was kind enough to provide these knives for review free of charge (full disclosure). What you are looking at is actually their Peak and Peak 2 models. The Peak features the thumb hole, while the Peak 2 is a two hand opening design. That’s the biggest difference so I’ve decided to put them both into one review. I also have their fixed blade, the Patriot, and will perform a write up on that later on.

General Dimensions and Blade Details

The Peak has an overall length of 8.66″, a 3.7″ blade, weighs 4.0 ounces, and is made in Bulgaria. This is a big work knife, but it’s slim and lightweight for its size. It reminds me of a beefed up Spyderco Endura, and strikes me as a hybrid between that knife and the Cold Steel Broken Skull.

The Peak came with a thin full flat grind, while The Peak 2 came with a partial flat grind. Both blades are cut from 3mm thick stock and share a similar elongated clip point profile. The long and thin blade profile provide plenty of cutting edge, some belly, and a fine tip. Manly included small sharpening choils on both models. The edges are evenly ground, and Manly states on their website that the edges are 15 degrees inclusive. It’s nice to see that information provided by the manufacturer. The blades are left with a light stonewashed finish.

Manly offers this knife in a variety of blade steels, including S90V and D2. My particular knives came in DIN 1.2379. DIN 1.2379 is a German steel and is equivalent to ANSI D2. Here is a link to the full data sheet for 1.2379 where you can review the chemical composition. Here is a link to DIN 1.2379 on the excellent ZKnives Steel Composition Chart. With a Chromium content of 12%, 1.2379 is more stainless than other variants of D2.

Lubo told me these knives were designed for use and asked me to put them through their paces. Right on. I so happened to have a couple large cardboard boxes at the house, and that is where I started. The Peak 1 was especially good at cutting through cardboard with its full flat grind, but both performed admirably. I also used the knives outside and whittled extensively with them. They aggressively removed large chunks of wood, and were handy for a morning of yard work. Finally I tested the knives on some apples. I try to have some fruit after dinner each night, and find cutting up an apple to be a good test of edge geometry and stain resistance. Both knives cut cleanly, although again the original Peak was a slightly better slicer due to that full flat grind.

Edge retention was good on both of my knives. Cardboard is an extremely abrasive material, and by the end of my box break down session both knives needed a tune up. Neither could shave hair. I used the coarse and fine rods on my Spyderco Sharpmaker and was able to freehand these back to shaving sharp in under a minute. This was surprising as D2 can be a notoriously tough steel to sharpen. I had no issues.

I also haven’t had any issues with staining, rust, or corrosion. I never cleaned this knife after cutting up fruit and I took the pictures after weeks of testing. The extra Chromium in this blend has to be why. Frankly, I would have never guessed the blade steel in this knife was an analog to D2. It behaves nothing like the steel on the Benchmade 710. In my opinion that is a good thing as I found the 710 tough to sharpen.

Handle, Ergonomics, and Pocket Clip

The Peak features full G10 handles with nested stainless steel liners, and a steel black lock. Everything is held together by a series of allen head fasteners. Fit and finish are good. The G10 has been crisply chamferred, all the hardware has been given the same bright stonewash of the blade, and all the parts line up neatly. This is like a reinforced version of the Endura.

Manly offers the Peak in 2 grades of G-10. A coarse peel-ply G10 shown with the black Peak 2, and a finer, less abrasive G-10 as featured on the orange Peak. Both offer good traction without being overly abrasive. In addition to the orange and black colorways, Manly offers these knives with desert camo G10 scales as well.

The Peak is a simple design. What it lacks in finger choils and curves, it makes up for with a simple handle design that is sure to accommodate most hands. It doesn’t get much more basic than this, with the gentle curve of the handle meeting easily with the palm of your hand. The corrugated G10 provides plenty of traction, and the inclusion of a short run of jimping on the bottom of the handle works perfectly for capturing your index finger. You don’t see jimping placed here on most folding knives, but I like it. It doesn’t wear out your thumb, but it also prevents your fingers from slipping forward on the blade. Smart.

The pocket clip is yet another example of simple, practical design. The pocket clip is a fold over deep carry clip, mounted on the very edge of the handle to ensure the knife buries as deeply and discreetly as possible. It’s swappable for tip up right or left hand carry, and a “filler tab” a-la Hinderer Knives is included to fill the space for the side you aren’t using.

In practice the Peak and Peak 2 both carry well. They are relatively thin and light knives, and the strong pocket clip anchors them securely in your pocket. The only possible issue is the prominent inclusion of the word “manly” on the clip. More self conscious readers may find that to be a message they would rather not broadcast from their hip, but like every other aspect of the knife, I think the branding has been done tastefully and I don’t mind it.

Deployment and Lockup

For deployment you have your choice of the thumb hole clad Peak, or the two hand opening Peak 2. Your choice will of course depend on your preference, but also perhaps where you live. As a Bulgarian company I am sure Manly has many European customers, and some of these countries don’t allow one hand opening knives. As an American who has grown quite fond of the one-hand-opening feature of modern folding knives, I tend to prefer the Peak, but the Peak 2 is kind of fun in its own way.

For the Peak, the thumb hole is actually a slight oval. In speaking with Lubo, my understanding is that this is done in part to avoid any issues with Spyderco and their Round Hole trademark. It works well, and you can easily snap the blade open with your thumb. However, the strong back lock will prevent you from flicking the blade open.

And on the subject of Spyderco, here is a shot of the Peak vs. my Paramilitary 2:

The Peak 2 is easy enough to unfold with two hands. There is plenty of room to grab the blade, and both knives are equipped with phosphor bronze washers. They operate smoothly.

For lockup we have the tried and true back lock. This is one of man kind’s oldest locks, and it remains relevant for good reason. It’s simply, sturdy, and secure. Here the lock back has been executed crisply. The spring is strong and the blade locks in place with a satisfying “snap”. There is no blade play on either of my knives. When it’s time to close the knife back up, the lock is easy enough to disengage with your thumb. All in all there is little to complain about when it comes to the lock on these Peak knives.

Blade centering is a mm or so off on my Peak, and perfectly centered on my Peak 2. No complaints given the price point.

Manly Peak Review – Final Thoughts

The Peak and Peak 2 are charming every man folders from Manly. I like the simple design. The knives are left with everything you need and nothing you don’t. They are built nicely from quality materials. All of this adds up to no-nonsense work knives. These may not win the “Most Innovative Knife of the Year” award any time soon, but they are comfortable in hand and cut really well.

Long time readers know I’m a fan of no-nonsense work knives like the Cold Steel American Lawman, and ESEE Zancudo. Humble work knives that get the job done. This Manly Peak is cut from the same cloth. But it’s also a very thoughtful design. Elegant, really.

I thought I would enjoy the Peak, otherwise I wouldn’t have requested a review sample, but I was surprised at exactly how much I enjoyed it. It’s hard to believe a simple knife like this didn’t already exist in a market crowded by thousands of models. I’m glad I checked it out.

These knives start at $80, and top out around $120 if you want S90V blade steel. I think Manly is offering good value for money here. $80 isn’t much more than what an Endura will run you these days, and in this case you get a superior steel, a deep carry pocket clip, and a full G-10 handle.

I like and recommend both these knives.

My understanding is that Manly Knives are mostly sold through their distributors at this point. So I recommend purchasing the Manly Peak and Peak 2 at ManlyUSA if you live in the States or Manly Canada if you are in Canada.

That said, please consider that buying anything through any of the links on this website, including Amazon and BladeHQ, helps support BladeReviews.com, and keeps the site going. Any and all support is greatly appreciated. Thank you very much.