Titanium Frame Lock Knives

Microtech Sigil MK6 Review

There is depth to the knife industry. So much depth that a reviewer can review knives for 5 years, hire on 3 other writers to review knives, amass a catalog of over 300 knife reviews, and still not review knives from all the major manufacturers. That’s case with this website and Microtech at least. It’s almost shameful that we haven’t reviewed anything by Microtech yet. Thankfully, that gets remedied today.

Buy the Microtech Sigil at BladeHQ

Microtech is a medium sized knife manufacturer located in Bradford, PA. The company was founded in Vero Beach, FL in 1994, by Anthony Marfione, but then moved to Pennsylvania a decade later. As a Florida boy I have no idea why they would pack up and move to PA after 10 years. Usually it’s the other way around. There must be a lot of steel up in PA.

Microtech is known for their automatic knives, and their aggressive designs. Maybe that’s why it took me so long to buy one. I’m not a huge fan of autos, believing that a good manual folder can be almost as easy to operate, and less likely to draw the ire of law enforcement. Plus, their styling is the equivalent of Affliction shirts for the cutlery industry. Shockingly, a Microtech was the 3rd knife Jim Skelton ever reviewed. And it was from the “Zombie Tech” series at that. There is a lid for every pot.

Aesthetic preferences aside, the blades are also pricey. Not that price has stopped me from reviewing a knife in the past. I just gotta get a good deal on it, or really want to check out the knife. Plus the recent ugliness with the Tony S. lawsuit didn’t rev me up about the company either. I have wanted to check their knives out, but something else always took priority.

That all changed when I picked up this Sigil MK6. What a cool knife. This Sigil is beautifully built and richly detailed. Whoever designed it clearly had a lot of fun. My version is the “Apocalyptic” flavor, with a full stonewash and copper accent piece. Lets dive in.

General Dimensions and Blade Details

The Sigil has an overall length of 8.75″, a 3.75″ blade, weighs 5.2 ounces, and is made in the USA. This is a sizable knife. It’s a bit more than I typically like to EDC, but it provides plenty of canvas. Microtech took advantage of this and covered every inch in ornamentation.

The floor to ceiling stonewash lends the knife an aged appearance, although my blade is date stamped “02/2017”.

The blade is a long, sloping, modified drop point. The tip is dropped low, and you only get a slight amount of belly. The tip is also fine and delicate. The blade shape and thumb cutout resembles a prehistoric bird.

A lot of attention went into this blade, and the machining is top notch. The thumb hole has a series of steps milled around it. The finger choil is delicately chamferred. The flipper area has been pocketed. The grinds are beautiful and even. The edge has been uniformly applied. No detail has been overlooked on this blade.

And the blade is made of M390 stainless steel. M390 is about as good as it gets in blade steel, exhibiting the enviable combination of high edge retention paired with easy sharpening. Most super steels are a bear to sharpen, but M390 isn’t bad. It’s one of my favorite blade steels and Microtech gives you almost 4 inches of it here with their Sigil.

Cutting performance is pretty good. The stock on this knife is relatively thick, and the partial flat grind has its geometric limits. Still I had no problem breaking down boxes, opening mail, and cutting fruit. The M390 held up like a champ.

Handle, Ergonomics, and Pocket Clip

The handle is a celebration of milling, and a thing of technical beauty. Microtech is a highly skilled manufacturer, and that comes out clearly in the handle of the Sigil. The titanium handle slabs have been meticulously tooled from all angles, to the point where this knife could pass for an extra on the Dark Crystal.

You can become lost in the complexity of the Sigil. The insides have been pocketed out to lighten the knife. There is also extra fine milling for the frame lock release, the hardware for the pocket clip is hidden, a full titanium floating backspacer, and a copper pivot shroud doubles as a lock bar stabilizer. Microtech’s trademark proprietary hardware holds it all together.

Speaking of the proprietary hardware, although a lot of people aren’t a fan of non-standard hardware, I think it adds something to the overall effect of the knife. It’s totally different and helps make the Sigil feel special. That said, it would have been great if they included a tool. Actually came loose a couple times. Keep in mind I got this knife gently used, so this isn’t a comment on how it came from the factory. I was able to tighten everything down with my finger nail, but this is far from ideal. Thankfully the pivot feels snug and I haven’t had to mess with it yet.

The simple handle shape and heavy chamferring of the titanium handle makes the Sigil a comfortable knife in hand. That should come as no surprise give how large this knife is. There is a small forward finger choil giving you extra options, but I find it to be a little tight relative to other knives with finger choils that I own. I’ve used it, but would advise against getting too aggressive with this finger choil. Good jimping is found on the thumb ramp, flipper tab, and backspacer. Although it lacks corrugated G-10, this isn’t a slippery knife by any means.

The pocket clip is made of milled titanium. Milled clips have done a bit of an 180 over the past few years. When they originally came out they were the bee’s knees. Then they sort of fell out of favor when people found them to be less effective than traditional stamped steel clips. I still like a milled clip if it’s done right.

I’d say the clip on this Sigil is pretty good. It is snug up against the handle and has some spring tension. It’s not crazy spring tension, and I wouldn’t recommend jumping out of an airplane with the Sigil clipped to your pocket, but there is spring tension and the knife is held in place in your pocket. The hidden hardware aspect of it is awesome, and the machining is top notch.

The Sigil carries about how I would expect. It’s a large full titanium folder. Not a total boat anchor, but you feel its presence in your pocket.

Deployment and Lockup

The Sigil is a flipper on bearings. Flipping action is excellent. The generously jimped flipper, strong detent, and smooth bearing system scores the action of this knife a solid “8” on my somewhat arbitrary 1-10 scale for flippers. Better than average, but not a rocket launcher. In addition to the flipper there is an elongated thumb hole. It’s fully functional and you can open up the blade with the thumb hole if you want to be more subtle.

For lockup we have a titanium framelock with stainless steel lockbar insert. The engineering wizards at Miroctech did a fine job designing this frame lock. It is totally secure, with no blade play to speak of, yet the lock is easy to disengage. This is thanks to good lock geometry, and excellent milling on the portion of the lockbar where your thumb goes to release the lock.

As I mentioned previously, there is a copper pivot collar that doubles as a lock bar stabilizer. A nice touch and the only splash of color on an otherwise grey knife.

Here is a shot of the Sigil next to my Paramilitary 2:

It’s a little longer than the Para 2, but you get a lot more blade. Speaking of which, blade centering is perfect on my knife.

Microtech Sigil MK6 Review – Final Thoughts

The Sigil is an impressive knife. Microtech’s styling may not be to everyone’s taste, and this is a bigger knife, but you can’t argue that the Sigil has been beautifully executed with top shelf materials.

Almost every bell and whistle you could ask for is included. A milled clip, milled out handles, floating back spacer, hidden hardware, top shelf blade steel, and tons of machining. Fit and finish is outstanding. And this knife is made in the USA.

My only gripe is that the body screws come loose and they don’t supply the tool to tighten them.

This isn’t an inexpensive knife, but for just under $400 I think you get what you pay for. It’s almost on par with my old Shirogorov 95t, and that knife clocks in at 200%+ of the cost. Any interesting comparison is with a Sebenza.

While this is far from being an everyman’s EDC, I think those whose interests are piqued by the concept of the Sigil will be happy with this knife. It exceeded my expectations, and it makes me want to review more Microtechs in the future. Speaking of which, I really like the Sebastian Benja designed Stitch. I think that will be my next acquisition.

I know the Sigil is not a knife for everyone, so I won’t give it a blanket endorsement. But I give it 2 thumbs up if you are already in the market for this knife.

Microtech Sigil – From $390.00
From: BladeHQ

I recommend purchasing the Microtech Sigil at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance 0055 Review

by Dan Jackson 5 Comments

Continuing on with my recent interest in reviewing unusual knives, the Zero Tolerance 0055 caught my eye for obvious reasons. This is an unusual looking knife. Designed by acclaimed Brazilian custom knifemaker Gustavo Cecchini of GTC Knives, the 0055 is a collaboration fusing the practical with the fantastical.

Buy the ZT 0055 at BladeHQ

No products found.

I think right off the bat, to even consider buying a 0055 you need to be willing to make some compromises. This knife is not going to work like a “normal” regularly ground drop point. If you are buying a knife to replace your well worn Griptilian or Para 2, then you will want to look elsewhere for that foundation piece for your collection. The 0055 is further out there, for those seeking something different at the expense of pure practicality. It’s not a knife for the masses. With that caveat out of the way lets explore this unique offering from Zero Tolerance.

General Dimensions and Blade Details

The 0055 has an overall length of 8.75″, a 3.75″ blade, weighs 5.0 ounces, and is made in the USA. Despite being a larger knife, the 0055 feels agile for its size. It’s relatively thin, relatively light, and has a narrow profile. You can EDC it, but I’m not sure it’s something you will be able to easily use in public. It may be mistaken for a piece of Klingon hardware before being recognized as a utility knife.

The blade is what I would describe as a modified reverse tanto. You don’t see many reverse tantos, the most famous of which is found on the Benchmade 940. Still, it can be a practical shape, marrying the utility of a drop point with the reinforced tip of a tanto. Here, the profile is modified so that there is no belly, almost an abstraction of an American tanto blade. Adding to the intrigue is a compound grind.

My immediate reaction to the 0055’s blade was mild confusion, quickly met by acceptance for what it is. You have to suspend convention a bit to get into the spirit of this knife. It’s different. Otherwise there is no point to even considering the 0055.

The blade is no doubt configured to fit into the equally angular handle. The compound grind is odd in that the thinner grind is towards the tip. That seems a little backwards, as generally speaking I think you would want a thinner grind towards the handle for detailed cuts, and for chores like cutting food and rope, but the thin tip section is good for cutting up cardboard boxes, although it can be difficult to orient this knife properly with your cutting medium due to the non-traditional blade shape.

I will say that execution of the blade is nice. The grinds are even and precise. The edge has been nicely applied. The blade itself has been given an almost matte stonewashed finish. The quality is everything you would expect from Zero Tolerance.

ZT decided on S35VN for the blade steel. S35VN is a fine choice for any higher end folder. I continue to appreciate the combination of easy sharpening, edge retention, and stain resistance that S35VN offers. It’s a fine steel and a worthy upgrade over it’s predecessor S30V.

Having absolutely no belly to speak of, the 0055 is challenging to sharpen, especially if you want to maintain the crisp transition between the compound grind. This “inflection point” can get rounded over if you aren’t careful or decide to sharpen this on a rod sharpener like the Sharpmaker. You have to treat this like 2 separate edges to maintain the character of the factory blade, or otherwise you will slowly round this transition over like a rock in a stream.

And ironically it’s not always easy to evenly sharpen a straight edge. It takes some care. The 0055 is not a knife for novice sharpeners, and wouldn’t be my first choice for a field knife.

Handle, Ergonomics, and Pocket Clip

The handle of the 0055 is technically rich. The outer surface of the titanium handles has been intricately machined. Inside ZT has milled out the pockets to lighten the knife further. A decorative pivot and elegant blue floating backspacer holds everything together. The technical precision of Zero Tolerance is on full display here, and it’s that ability to execute that makes their products so consistently good. This handle is no exception. Everything is dialed in, from the finish on the titanium to the black hardware. There is not an errant machining mark, or jutting screw on this knife. Everything feels purposeful and controlled.

The quality is unquestionable, so the real test is how you feel about the design. I happen to like it. The coffin shaped handle encapsulates the closed blade. It’s different, but cohesive. Gus Cecchini is a world renown knife designer, and his talents are apparent.

Surprisingly, the 0055 feels natural in your hand. That angular handle design doesn’t look particularly comfortable, but it subtly cradles the palm of your hand, while your thumb naturally finds its way to the spine of the blade. Although the handle looks complicated, the lines of the handle are actually simple. What is odd about the 0055 is the placement of the edge. The edge pulls away from you, so depending on the task you may find yourself re-orienting the knife towards the cutting media. Not the most practical configuration, nor is it my favorite, but the 0055 is still capable of getting work done if you are up for the task.

The pocket clip could have been an opportunity to really go off the deep end. Instead Gus and ZT went with a relatively simple spring clip. The shape is non-traditional, but not so far off the reservation that it becomes goofy. It also doesn’t have the typical “ZERO TOLERANCE” billboard, which is a welcome departure. The end result is a clip that compliments the knife, but isn’t remarkable.

The 0055 caries well for a larger knife. Again, ZT has taken steps to keep the weight down, and it’s a relatively thin design. While this isn’t a deep carry clip, the knife carries unobtrusively. The only issue is that the framelock relief is right next to where the clip meets the handle, and I have found that the fabric of your pocket tends to bind up and get caught in the framelock relief. Not a deal breaker, and you could always swap the clip to the show side, but it’s worth noting.

Deployment and Lockup

A part of what makes the 0055 unique to the production knife world is the use of Gus Cecchini’s Spring Loaded Tab (SLT) system. The SLT is a spring loaded flipper tab, which is used to open this manual flipper. You pull back on the tab lightly expose it, and then pull back with full force to release the blade like a typical flipper.

I have found that the SLT system works great. At least in the short term. It successfully opens up the knife, is fun to use, stays out of the way a little better then a traditional flipper, and it doesn’t spoil the lines of the knife as much as a traditional flipper.

The biggest con to the SLT system is that it’s more complicated then a regular flipper tab. Part of the beauty of a flipper is the simplicity. The SLT system is definitely an example of over engineering. It’s just like developing a special pressurized pen to write in space, when you can easily accomplish the same task with a pencil.

Personally I enjoy the novelty of the SLT system on this knife. When it comes to man’s oldest tool, it has become increasingly tough to innovate. Here Gus has managed to create something different. Even if it lacks the elegance of a standard flipper, it has at least been nicely executed and it’s fully functional. The knife flips great, thanks in part to a robust detent and a smooth caged bearing system. I’d rate it a solid “8” on a 1-10 scale. While I wouldn’t want the SLT system on every knife, it is a big part of what made the 0055 interesting to me.

Here is a parting shot of the 0055 next to my Griptilian:

For lockup we have a titanium frame lock with a steel lock bar insert. Just like on every other Zero Tolerance framelock I have reviewed, the lock has been beautifully executed. It’s rock solid and there is no blade play or lockbar stick at all. This continues to be something of a gold standard in framelock knives.

Zero Tolerance 0055 Review – Final Thoughts

The 0055 is a knife you will either connect with or dismiss, and it may take a while to grow on you. I happen to enjoy this funky design thanks in large part to Zero Tolerance’s brilliant execution. I think a lesser manufacturer would have a hell of a time getting away with a design like the 0055. Here the knife has been so finely tuned, that I couldn’t help but appreciate it.

The 0055 is not a knife for a 1 knife collection. Hell, I don’t think it’s a knife for a 10 knife collection. The 0055 is a knife for fans of Gus Cecchini and his work, or fans of unique designs. If your collection is crowded with the work of designers like G&G Hawk, and Serge Pachenko, then the 0055 could be right up your alley. But if you are looking for a more traditional Zero Tolerance folder, then I have to recommend something like the ZT 0562.

If the 0055 intrigues you, then I recommend checking it out. I have enjoyed owning mine, and appreciate it for it’s non-traditional nature. However, if you are considering this as your only premium pocket knife, then I’d suggest looking elsewhere.

No products found.

I recommend purchasing the Zero Tolerance 0055 at BladeHQ or Amazon.

Spartan Blades Metis Review

by Grayson Parker 1 Comment

Last Updated: September 7, 2019
Few companies have the pedigree that Spartan Blades does. I rarely hear them pop up in conversation among gear geeks, but that hasn’t stopped them from accumulating a small hoard of Blade Show awards. Between the aforementioned awards and the extensive Special Forces resumes of the two founders, I’m surprised they don’t get more chatter. Maybe they do, just not among folks I know.

Buy the Spartan Blades Metis at BladeHQ

No products found.

As Dan covered in his review of the Horkos, Spartan’s reputation is firmly grounded in its fixed blades and (though I hate the overuse of the term) “tactical” folders. This reputation was so entrenched that when I was offered a Metis in trade, I had to triple check the dimensions. There was no way Spartan made a sub-3” blade…right? Curiosity piqued, I went ahead with the trade. How would an everyday carry knife designed by former Special Forces handle mundane tasks? The short answer: better than I expected, given recent trends among overbuilt folders.

General Dimensions and Blade Details

The Spartan Blades Metis is close to my ideal size for a pocket folder. It features a 2.7” blade housed in a 4” handle, and the entire package (sans clip) weighs in at 2.79 ounces. Those numbers look pretty good, especially when you consider the all metal construction. A knife this size is well suited to a range of everyday tasks, from opening packages to light food preparation. It’s also legal to carry in a wide range of jurisdictions, as it falls under the common 3” blade limit.

If there is one aspect of the Metis that grabs my attention, it’s the blade shape. Most folks would probably call it a drop point, but the dip along the spine gives it something akin to a harpoon’s profile. Whatever the nomenclature, it’s fantastic. There’s enough belly for slicing cuts, but not so much that the edge slides out of the cutting medium during push cuts. The harpoon-ish profile – in addition to reinforcing the tip of the blade – leaves a dip in the rounded spine that’s a perfect resting place for a thumb.

For enthusiasts, Crucible’s S35VN is no longer news. In fact it pretty much serves as a benchmark against which we compare other steels. It has a proven track record as a “do-everything” steel: it chips less and is easier to sharpen than its predecessor S30V, with comparable or better edge retention and rust resistance. I didn’t strenuously test the steel in this case, but I was mostly using it as a gentleman’s folder, and it hasn’t needed any maintenance in the few months that I’ve had it.

When I did use the Metis, it outperformed my expectations. No, it didn’t pass the apple test, but it did well enough that my insensate pinky never started twitching nervously. It behaved similarly while breaking down cardboard boxes: not the best, but good enough to flex into the role. The old saying “jack of all trades, master of none” is appropriate here.

Handle, Ergonomics, and Carry

There’s not much that can be said about the handle of the Metis. Like so many of its competitors, it’s another slab-handled, titanium-on-titanium knife. So what makes the Metis stand out in a crowd? That’s difficult to answer. The show side of the Metis is beautifully simple; between the milled backspacer and the singular visible screw, it seems almost hewn from titanium. The lock side couldn’t be more different. Every screw that was hidden on the show side is plainly visible, and the milling for the lock bar in conjunction with the overtravel stop give it an aesthetic not far off from a circuit board. With that in mind, it’s arguable that Janus is as fitting a namesake as Metis.

Ergonomically, the Metis ranges from unoffensive to pleasant, depending on the task. It never stood out as being great, but neither did it stand out as being horrible – which surprised me given the odd placement of hard angles. If the knife is resting in your fingers, chances are you’re not gripping it so tightly that the angles will have an impact on the ergonomics. By contrast, if you’re gripping it so tightly that the angles would matter, you’re probably holding it farther back in your palm where the angles won’t cause any hot spots. At least, that was my experience. The generous chamfering and subtle curve of the handle are certainly factors here.

The best I can say about the pocket clip on the Metis is that I understand some of the design impulses behind it. It’s attractive and fits the overall aesthetic. The screws for the pocket clip are hidden (meaning they screw in from the interior), which is a nice touch, though it makes removal inconvenient. In slacks, dress pants, or particularly thin jeans, this pocket clip works fine. Beyond that, the news isn’t as nice. The clip doesn’t have much spring to it, so to compensate it doesn’t make contact with the handle scale. Ultimately, this restricts the number of ways to comfortably carry the Metis.

Problems with the clip aside, the Metis is a pretty quiet pocket companion. Most of the time I carried it in the leather slip I use for traditional knives, and while it was a bit of a tight fit, the slip ensured that the Metis didn’t slide out of my pocket or roll to the bottom and cause discomfort. I’d have preferred to carry this with a clip, but it wasn’t onerous to forego it. My CRK Mnandi has a great pocket clip, but I still carry it in a pocket slip more often than not.

Deployment and Lock-Up

The blade of the Metis is deployed solely by the flipper tab. As the entirety of the blade is housed within the handle, there is no pinch point which would facilitate two-handed opening. Though slightly disappointing – it’s always a feature I like to have on a “dress” knife – I can’t fairly complain, as a wider blade wouldn’t carry as well. This flipper is meant to be pulled (like a light switch) rather than pushed. Deployment is thoughtless, reliable, and doesn’t generate discomfort, even if you’re using the Metis as a fidget toy.

The ease of deployment is in part thanks to the caged bearings the blade rides on. I’m of two minds regarding the use of bearings in folding knives: on one hand, they allow for silky smooth pivots, but on the other they’re far more susceptible to grime and grit than traditional washers. (Addendum: I’ve been informed that I may be wrong on this account. More information is welcome in the comments.) On a knife like the Metis caged bearings are fine. A knife this size is clearly in the “EDC/gentlemen’s” category, and not intended for hard use.

At this point, there’s not much that can be said about a well-executed framelock, and the lock on the Metis certainly qualifies as such. The lock face consistently engages 50% of the blade tang, disengaging the lock is easy, and there’s only a fraction of a hair of wiggle in the lock, which vanishes in use. A steel lock insert could fix that, but the only titanium framelock I’ve ever handled that doesn’t have that slight amount of play is the Mnandi, and that knife certainly isn’t being flipped open like the Metis.

Spartan Blades Metis Review – Final Thoughts

Currently, it’s difficult to find a Metis in stock anywhere. My understanding is that this design hasn’t been discontinued, Spartan just hasn’t released any batches recently. Hopefully when Spartan comes back to it, they do so with an eye towards improvement, because there are a few changes that I’d like to see. The bones of a truly great knife are here, and it wouldn’t take much to flesh it out.

First, the pocket clip needs to be redesigned. A nondescript spring clip with outside accessible screws would be far more functional. Second, eliminate the overtravel stop by incorporating a steel lock face into the frame lock. This would eliminate the scant play there is and clean up the lock side of the knife. Those two changes would improve the function and form of the Metis, and (designing and retooling costs aside) I can’t imagine it costing more to produce than the current design. By moving away from a sculpted clip, it may actually cost less.

When they were available, the Metis sold for $340. That’s quite a bit of money – especially for a pocketknife – and the competition is stiff. The obvious comparison is the Small Sebenza. I can’t make a direct comparison (I’ve never owned a Sebenza) but I do own an Mnandi. The best way I can describe it is that if the Metis is practically flawless, the Mnandi is flawless. Of course, no Chris Reeve knife has a flipper, so Spartan is ahead of the game in that department.

Is the Metis still worth buying in the meantime? If you can find one, and if the design speaks to you, I’d say yes. It’s well made, attractive in its own right, and can flex into a number of different roles. If my complaints dissuade you, I’d recommend keeping an eye on Spartan Blades in the meantime.

No products found.

I recommend purchasing the Spartan Blades Metis at BladeHQ, KnifeArt, and Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kizer Cutlery Guru Review

by Benjamin Schwartz 9 Comments

Last Updated: July 30, 2019
It’s been interesting to watch Kizer’s evolution over the years. They had an ambitious, albeit amorphous, beginning, with somewhat forgettable designs rendered in high-quality materials at head-turning prices; I still get a little jolt when I see the Sliver going for $70 with S35VN steel.

Buy the Kizer Guru at BladeHQ

Buy on Amazon

Then Kizer knives had the brilliant idea of bringing in talented knife designers to take full advantage of their manufacturing capabilities and great prices. It wasn’t their first collaboration knife, but the Ray Laconico-designed Gemini was the a big hit for Kizer, and the amount of collaborations rolling out of their doors hasn’t slowed down since. The company realizes a stunning amount of models, from makers at all stages of their career: well-known names like Ray Laconico and Matt Diskin appear alongside promising up and comers like Justin Lundquist and Elija Isham.

Matt Degnan is a maker whose work has been brought to wider recognition with several Kizer collabs. Degnan is behind the Roach, the Kane, and most recently the Guru. The first two models didn’t move the needle, but the Guru seemed much more my speed.

As with their competitor Zero Tolerance, I haven’t really found “my Kizer” yet. I reviewed the 3404, which was just fine but ultimately forgettable. I had some enthusiasm for the Vanguard Gemini but that has waned some since my review (which in itself wasn’t unqualified in its praise). The Guru stood out in Kizer’s recent offerings as a model that might just be able to go the distance. Let’s take a closer look.

Full Disclosure: Kizer provided me with a Guru free of charge for the purposes of the review. This in no way affected my reviewing process nor did it alter my opinions or verdict.

Blade Dimensions and General Details

The Guru has a blade length of 2 7/8”, with a cutting edge of 2 11/16”, a handle length of 4 15/16”, and an overall length of 7 15/16”. It weighs 3.96 oz. and is made in China.

The Guru has a “Sheepsfoot Looking Up” kind of blade shape that is attractive and unusual. Functionally, it is all gently-curved belly, and that’s fine. With a whopping .14” thick blade stock and a relatively short sabre grind the Guru isn’t much of a slicer. It’s thicker behind the edge than my Strider PT. But while it isn’t my thing, a hard use grind isn’t immediately grounds for failure. The problem is, the Guru might be less “ground for durability” and more just “poorly ground,” with confusing peaks and valleys in wildly different types of cutting tasks.

I don’t usually cut food with my knives, but I did a little food prep with the Guru and can confirm you’re going to leave behind a David Cronenberg-esque crime scene cutting fruit and other foodstuffs with this thing – it ain’t pretty. In cardboard and wood it can function decently, but only if you “aim” the edge at a specific angle; otherwise it bunches up. Strangely, the one area in which the Guru performs well is wharncliffe/sheepsfoot-style tasks, where the point is in play more than the full edge: cutting tape when opening a box, for instance; surprisingly delicate tasks for such a burly blade to excel in.

S35VN is becoming so prevalent in high-end knives that we reviewers are quickly approaching 8Cr13MoV levels of redundancy when it comes to writing about it. It’s great, Kizer’s iteration is great, you’ll love it. Editor’s note: And as always you can find a deeper dive into knife steel here.

One thing to note: this is the third Kizer I’ve had (the second with S35VN) and while overall fit and finish is great, they don’t get their knives real sharp before boxing them up. In the case of knives with super steels I think it’s fair for the user to expect a good edge out of the box: not everyone has the means or the knowledge to immediately sharpen these more difficult-to-work-with steels. This will be an even bigger problem as they transition into less amenable high-end steels like M390.

Handle, Ergonomics, and Pocket Clip

The Guru’s handle is so close to being great. A forward finger choil is almost always a guarantor of decent if not mind-blowing ergos, but here it’s more of a stumbling block. Kizer chose to begin the blade right at the end of the choil, with nothing between the end of the choil and the beginning of the sharpened edge. This is a common choice among manufacturers and not peculiar to Kizer, but it does mean you need to be careful when you’re choking up on the Guru: it would be very easy for your finger to slide forward onto the edge.

Back off the choil and the Guru accommodates three fingers in the middle portion of the handle and one on the other side of the beak. This isn’t always a successful setup but here, mainly because the post-beak butt end of the knife is large and flat, it works okay. The problem is, when you’re not using the forward choil you’re more than an inch away from the start of the cutting edge – not really acceptable for a knife of this size, and it squanders the fine control that makes a sheepsfoot blade shine in use.

There may be issues with the ergonomics but the Guru’s pocket clip is great. This is the way a sculpted clip should work. It’s durable, secure, with plenty of spring tension, and looks really nice. The rounded edges eliminate hotspots and even though the Guru is kind of portly it keeps it in place in your pocket. Other than the non-reversability I have no complaints. This is such an improvement over the nightmare clips on early Kizer models.

Deployment and Lockup

In my review of the Spyderco Mantra 1 I noted that the ball bearing pivot seemed to work better with the thumb hole than the flipper, and while I’ll never opt for ball bearings over standard washers I have been curious to further explore how they played with non-flipper deployment methods.

My Guru is the thumb stud variant and the ball bearing deployment is very good. Once the thick blade gets over the stiff detent it flies open. Kizer deserves particular praise for that detent. I’ve handled many Kizers and none of them had those detent issues that we see on other frame locks. You can put all the pressure you want on the Guru’s lock bar and it will still deploy reliably.

Lockup is similarly well-done. The stainless steel insert makes contact against about 30% of the tang. There is no blade play, and disengagement is stick-free and smooth. The only issue I have is that, in closing, the blade wants to fall shut quite quickly – a little dangerous in my opinion. The detent is so aggressive that it functions as a kind of half-stop, catching the knife again as you’re closing it, so that helps a little bit, but it’s still something to be aware of.

Kizer Guru Review – Final Thoughts

The Guru is well-made as all Kizers are, but I would have liked to see more time spent honing this one for great performance in addition to its mechanical competence. It looks cool, and there’s nothing wrong with picking up a sub-optimal knife because you like the way it looks, but for me, the wedgey edge and incorrect finger choil are a fatal combination and overwhelm any other charms this design has.

Kizer reset the bar for what we could expect for our dollar, but now that the rest of the industry has caught up their designs have to pull their weight in an increasingly crowded market segment, and I can’t think of any objective reason to recommend the Guru. It doesn’t quite manage to bridge the gap between “interesting design” and “great tool.”

Kizer Cutlery Guru Framelock Folding Knife,3in,S35VN Steel,Standard Edge,Satin,Gray KI3504K2

Steel: CPM-S35VN Handle: 6AL4V Titanium Blade Length: 2.97" Overall: 7.43"

If you are thinking of buying a Kizer Guru, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Kizer Ki3480 Dirk Pinkerton Rogue Review

by Dan Jackson 10 Comments

The Kizer Ki3480 Rogue is a series of firsts for me. It’s the first Dirk Pinkerton design I have ever reviewed, it’s my first review of a mid-tier Kizer knife, and it’s the first wharncliffe I have reviewed in a while.

The designer, Dirk Pinkerton, is an interesting guy. He is a custom knifemaker from Huntersville, North Carolina, and his focus is on purpose built knives for self defense applications. He even did a collaboration with our very own Chad McBroom, the Active Response Kerambit.

Buy the Kizer Rogue at BladeHQ

Buy on Amazon

Using knives defensively is well outside my wheelhouse, but I have been curious about Dirk Pinkerton’s designs ever since reading RoadKill’s review of the Meyerco Wharning back in 2012.

The Rogue shares some obvious design similarities to the Wharning. Namely, the aggressive wharncliffe blade. It’s different from what I typically review, and different from Kizer’s other designs, which is exactly why I wanted to check it out.

General Dimensions and Blade Details

The Rogue has an overall length of 7.125″, a 3.00″ blade, and it weighs 3.92 ounces. Like all Kizer knives, the Rogue is made in China. I like that although the Rogue was likely designed with self-defense in mind, this is still a practical size for Every Day Carry (EDC). In fact, it almost resembles a folding box cutter. An obvious comparison would be with the Spyderco Yojimbo 2, a knife designed by Michael Janich. In addition to being a designer for Spyderco, Michael Janich is a martial artist and fellow enthusiast of the wharncliffe.

The dramatic wharncliffe blade is what makes this model stand out. You are going to either love it or hate it, and it is different from anything else in my collection. The 4mm thick blade has been given a partial flat grind. There is no swedge but the blade still comes to a needle-fine tip. The blade has been given a fine tumbled finish.

The benefit to a wharncliffe blade is that it excellent for slicing cuts. Power is applied uniformly to the edge whether you are at the tip, or by the ricasso. Combine that with an excellent tip for thrusting, and you have a very capable blade shape. For these reasons it is easy to see why guys like Michael Janich and Dirk Pinkerton prefer the wharncliffe.

The flip side is that there is no belly, which makes tasks like skinning near impossible. This is not my favorite knife to use in the kitchen.

Kizer chose S35VN for the blade steel. S35VN is excellent stuff. The more I use S30V, the more I like my S35VN blades. They are easier to sharpen and less brittle, but still hold a good edge like S30V. S35VN is an American steel, and Kizer had to import it in to China to make their knives. We often think of products being exported from China, so it’s an interesting point to consider, and speaks to Kizer’s dedication to making high end production knives.

Handle, Ergonomics, and Pocket Clip

The Rogue has full titanium handles. Unlike the Intrepid, the handles of the Rogue are not 3-D contoured. Instead, they have been milled with a series of reliefs to provide texture and visual interest. The handle was then given a black coating and then the face of the handles were surface ground to provide a brushed titanium texture. The two-tone finish is unique, and so far it has held up well. Everything has been screwed together, and there are 2 barrel spacers and a decorative pivot.

Fit and finish is excellent. Everything has been completed to an eerie level of precision, much like a Taichung, Taiwan Spyderco.

The ergonomics of the Rogue benefit greatly from a simple handle design, and good use of jimping. The handle shape is about as simple as they come, which means that it will feel great for most people. There is flat top jimping on the spine of the blade. This offers good traction without being overly destructive. There is some additional light jimping / millwork on the spine of the handle, and also where your pinky and ring finger rest. These features, combined with the millwork on the handle slabs, offer a good deal of traction for the end user. The end result is a knife that feels secure in the hand without being obnoxious.

The blue titanium pocket clip offers a splash of color while being a good pocket clip. It’s a fold over deep carry clip, that has been placed so that about a quarter of an inch of the knife is left exposed. This was probably done to provide easy access in the event you needed the knife in an emergency situation. Personally, I’d prefer an even deeper carry, but the knife is still discrete.

The Rogue carries well. It’s not an overly thick or heavy knife, and the titanium clip offers plenty of retention. The knife stays in your pocket until you need it, and then it’s ready to go. No complaints with how this knife carries.

Deployment and Lockup

The Rogue is a dual thumbstud knife. I have always liked thumb studs, and the ones on the Rogue are nicely done. They are prominent and easy to access. The blade rides on phosphor bronze washers; my washer material of choice. Here the action is smooth and easy. There is a fairly strong detent, and the blade flicks open with a push of the thumb.

For lockup we have a titanium framelock with a stainless steel lockbar insert. The knife locks up early, and is secure. There is no blade play in any direction. There is also no lock stick. This is an excellent fame lock and rivals the Zero Tolerance framelocks I have owned over the years. Top shelf stuff.

Blade centering is good, but not perfect. That is about the only fit and finish nitpick I could find.

Kizer Rogue Review – Final Thoughts

The Rogue is solidly designed and perfectly executed. I have a hard time finding fault with this knife. Maybe I would move the pocket clip up a quarter of an inch, and the blade over a millimeter. Beyond that I don’t have much to say. Some may not care for the aggressive wharncliffe blade shape, or the 2 tone handle, but that is more personal preference than anything. If you are a fan of the design, then I would recommend it without reservation.

What you get for the money is also worth mentioning. As of the date of publication of this review, the Rogue can be had for just under $120. At that price you are getting a full titanium handle, a S35VN blade, a thoughtful design, and a near perfectly executed knife. The fit and finish is excellent, and the frame lock is among the best I have handled. I can’t think of much that touches it at this price point.

The Yojimbo 2 can be had at that price, but you won’t get S35VN or a titanium frame lock. That is an interesting comparison. I am sure some will prefer the thumb hole and compression lock, and find those to be worthy trade offs, but if Spyderco were to make the Yojimbo 2 as a titanium framelock, it would easily be a $200 knife.

The Rogue is another solid offering from Kizer. Between the high end Intrepid, and the value oriented Vanguard Gemini, the Rogue shows that Kizer can also play in the middle market. This is a company to continue watching. Their strategy of offering both high quality and high value is tough to ignore.

Kizer Cutlery 3480 Rogue Framelock

I recommend purchasing the Kizer Rogue at Amazon and BladeHQ. Thanks for reading.

Zero Tolerance 0900 Review

by Grayson Parker 13 Comments

Last Updated: May 20, 2019
Alright, peer pressure, you win. You finally got to me. After holding out for god knows how long, I finally jumped on the titanium-flipper-framelock (henceforth TFF) bandwagon. Not just any TFF, mind: if I’m challenging my own tastes, I’m going all the way. Full bore. Thus, I decided to pick up a Zero Tolerance; my first ZT, excepting my brief flirtation with one of their pens. The only concession I granted to my own predilections was blade length, and that’s in part due to workplace regulations.

Buy the Zero Tolerance 0900 at BladeHQ

Buy on Amazon

The Zero Tolerance 0900 is a design by Les George that’s based on his “Mini Harpy”, but which also bears a ton of similarity to his ESR series. Les’s design aesthetic is tough to pin down, but his fascination with drop points and simple lines gives me the warm fuzzies inside. Honestly, I’m glad ZT picked a relatively conservative designer for their first sub-3” knife. No tanto point, no funky recurve. Just a solid design.

One of the reasons I steered clear of TFF’s was that I (persnickety a-hole that I am) could always find something to complain about. Whether my excuse was the lack of a lock-bar insert, the steel not being quite good enough, or the blade length being a touch too long for polite company, there was always an excuse. Not anymore. All of the reasons that otherwise would stop me from reviewing a TFF are gone, and my pretensions are crumbling around me. On that note, let’s get into the review.

General Dimensions and Blade Details

Neither Zero Tolerance nor Les George are known for dainty designs, so it should come as no surprise that their collaboration – though short in the blade – is a bit of a tank, weighing in at 4.3 oz. The 0900 has a 2.7” blade, a 3.9” handle, and an overall length of 6.6”. Most of the time I don’t feel the need to mention weight ratios, but this is a lot of weight for such a short blade. It’s shorter and heavier than the infamous Kershaw Cryo. The balance point of the 0900 is perfectly set in the first (and only) finger scallop, so the knife isn’t poorly weighted, just dense. Very dense.

Although this is my first ZT, it isn’t the first I’ve handled. A good friend of mine is firmly in the Zero Tolerance camp, and more than a few of their offerings have passed through his collection at one point or another. Handling those set my expectations pretty high. For the most part those were met; apart from one fatal flaw, that is. The secondary bevel is slightly asymmetric at the tip of the knife. I don’t know how ZT could let this leave the factory in such condition.*

*please don’t kill me KAI, that was sarcasm

I’m a bit of a stickler for thin grinds, so the chunky blade of the 0900 made me hesitate to pick one up. Fortunately, those fears were unfounded. The 0900 is a much better slicer than expected; the wide blade and high grind gets it thin enough behind the edge to do some real work. So in that sense, it outperformed my expectations. Sadly, it’s still a thick chunk of metal, and the high flat grind can only do so much to help. When compared to other knives in its class – notably the Spyderco Techno and the DPx HEAT/F – the 0900 falls closer to the Techno than the HEAT. That’s a good thing in my book.

The blade is S35VN, which is probably one of the most well-rounded steels on the market. It’s easier to sharpen than its predecessor S30V and it chips less. Mine arrived with an edge so keen I felt it on my finger before my eyes registered contact. I’ll grant that I haven’t been able to maintain that level of sharpness, but I’m not exactly a gifted sharpener. Infrequent stropping has kept it sharp enough for my needs.

Handle, Ergonomics, and Carry

Les George tends to use fairly simple lines in most of his designs. As a result, Zero Tolerance didn’t have to flex outside of their comfort range – at least, not far out of it – to produce this for a mass market. A good comparison is the ZT0220, designed by Jens Anso. Anso’s aesthetic is more avant-garde and less likely to appeal to a broad market. You can see some of his design aesthetic in the 0220, but it’s so muted that his touch isn’t immediately clear. By contrast, Les’s design aesthetic is much more conservative, and thus easier to translate. Ultimately this feels like a Les George produced by Zero Tolerance, not a Zero Tolerance designed by Les George.

In my experience, ZT knives have had good (but not great) ergonomics. I’ve occasionally been blown away: the contoured handle of the 0454 and the thumb placement on the 0392 come to mind, but those are the exceptions, not the rule. As such, I expected the 0900 to be solid in the hand, but nothing to write home about. That was a mistake on my part. This knife melts into my hand in a way that I never would have expected. It almost sings. My error lay in assuming that the contours were simply for visual appeal, and that otherwise it would feel like any other slab-handled knife. Photographs did the design no favors. The contours are deep and well chamfered, allowing your palm to wrap around the handle without feeling like you’re holding a slab of metal.

Sadly, this knife carries about as well as expected: by that I mean that you need the right pants to carry it securely. Part of the problem is the clip. What makes it great in the hand makes it a bit unreliable in the pocket: allow me to explain. The 0900 (like many modern ZT’s) uses KAI’s deep carry pocket clip. It’s unobtrusive and matches the lines of this particular knife, but has a very thin point of contact on a very wide handle. This problem is exacerbated by the placement of the clip, as around half of the point of contact hovers over the lock bar, which means it’s hovering over empty space when the knife is closed. In work pants, this hasn’t been an issue, but in dress pants, quick-drying shorts, or other thin materials, it’s lead to some anxiety.

Deployment and Lockup

This is the part where I eat a healthy dose of crow. As much as I dislike the market’s obsession with flippers, I have to admit that the 0900 is significantly more fun to fidget with than any other knife I own. The deployment is crisp, clean, and requires zero wrist flick. No weird problems with the lockbar were experienced. Keep everything well-oiled, keep grit out of the bearing race, and you’ll be perfectly satisfied. It’s worth noting that I haven’t seen any of the odd lockbar issues others experienced on the 0450.

What can I say? There’s no stick, and lock up has consistently fallen around 40%. The replaceable steel insert is a very nice touch. In addition to warding off lock stick and making potential repairs less onerous, it also functions as an overtravel stop. To date, I haven’t experienced lock rock or blade play, and I don’t expect to. Would I like a lock that keeps my hands out of the blade path? Yeah, but this is as close to perfection as a framelock can get, so I can’t bitch too much.

Zero Tolerance 0900 Review – Final Thoughts

My complaints are pretty minor: I’d like a thinner grind, a different clip, and maybe a bit of weight off the whole package, but those are wants, not needs. It’s exciting enough that Zero Tolerance took a step into the sub-3” category. I hope the 0900 – and the 0450, and the 0808, for that matter – sell well enough that ZT pays more attention to this share of the market. If the recent runs in blue and gold are any indication, that’s exactly what’s happening.

There is some stiff competition for the 0900. The “little big knife” concept has been around for awhile, and other companies have been doing a lot to refine their own offerings. Spyderco’s Techno and DPx’s HEAT/F are fairly popular and fall in the same price bracket. How does the 0900 stack up to those two? Pretty well, actually. The ~~hollow~~ full flat ~~how is this not a hollow~~ grind of the Techno beats out the flat grind of the 0900, but the George design has better ergonomics and the benefit of a steel lockbar insert. While I’m sure the HEAT/F makes for a great rescue knife, it’s far too chunky for everyday tasks, so I think the 0900 has the edge here as well.

I’ve pigheadedly prided myself on steering as clear as I can from the whole TFF market. I don’t like it when a meta (to use gamer jargon) is solved; in my view, it leads to more iteration at the expense of innovation. My problem is that the 0900 is good enough to shut down any objective complaints I have about a titanium flipper framelock. When those issues are solved, my recalcitrance rings less of legitimate criticism, and more of hipster-ism. If you like flippers already, chances are you’ll like the 0900. If you don’t, this is a great (albeit expensive) way to test the waters.

Zero Tolerance Les George Titanium KVT Folding Knife (0900); Manual Open, S35VN Stainless Steel, KVT Ball-Bearing System, Frame Lock, Reversible Pocketclip; 4.3 oz., 2.7 In. Blade, 6.6 In. Overall Length

Durable S35VN stainless steel makes the smaller, classic drop-point blade tough, chip resistant and razor sharp
Stonewashed finish gives blade and handle desirable roughened, scuffed look and helps hide scratches
Reversible, deep carry pocketclip convenient for left or right handed tip-up carry and sits low and comfortably in pocket
Ideal EDC; sleek, easy folding pocket knife essential for everyday tasks—survival tool, cutting boxes, self-defense, home protection, tactical use or the perfect gift
High quality, general all-purpose knife perfect for EDC or use while hiking, camping, fishing, hunting, working, utility or outdoor activities

Editor: I recommend purchasing the Zero Tolerance 0900 at Amazon and BladeHQ. Thanks for reading.