Hard Use Folding Knives

Hinderer MP-1 Review

It seems like every time I write a review of a Hinderer knife I can’t help but open with a commentary on the state of the Hinderer market. Maybe it’s the finance degree talking. At any rate, a few years ago a Hinderer XM-18 would sell for well north of retail. Some were selling for close to $1,000.

Buy the Hinderer MP-1 at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B0773W7LPG” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]Amazon[/easyazon_cta]

Those prices slowly began to drop from their peak, and when I wrote my review of the XM-18 3.5″ back in October 2014, I paid around $550 for the knife. Still about $150 above retail, but a far cry from the $800+ they were commanding when I was seriously getting into knife collecting in 2011-2012.

Fast forward to October 2015 when I reviewed the XM-18 3″. I paid $385 for that knife, which is right around retail.

And oddly enough I bought my MP-1 right around the fall of 2016, and I paid $450 for it on the secondary market. It retails for $695 on Knife Art. Things sure have changed. Who would have guessed that you can buy a Hinderer for below retail on the secondary market? Probably not the guys that paid $1,000 for their XM-18s.

Regardless of the reason I won’t complain. It allowed me to pick up the MP-1 at a nice price for this review. And the MP-1 is an interesting piece that I might not have checked out at full retail. It shares a lot of similarities to the XM-18, but it’s stockier in build. This knife also comes with a new feature. MP-1 stands for Modular Platform-1, and this knife’s selling feature is a removable backspacer that can be swapped out with various other backspacers. I am not sure if the replaceable backsapcer on its own it would be reason enough to buy the knife, but the rest of the MP-1 was intriguing.

General Dimensions and Blade Details

The MP-1 has an overall length of 8″, a 3.5″ blade, and weighs 5.9 ounces. This knife was designed by Rick Hinderer and is made in the USA. The MP-1 a substantial knife and is about half an ounce lighter than a G-10 handled XM-18 3.5″. Personally, this is not the most practical Every Day Carry (EDC) knife, but it’s beautifully made with lots of detail. The workmanship is unmistakable and I have spent many evenings admiring this knife. While I have carried and used my MP-1, my ideal EDC knife is usually about the size of a Sage 1. I am sure some carry theirs religiously, but must confess this is more of a collectible for me.

The MP-1 has a modified sheepsfoot blade, not dissimilar to the Benchmade Triage rescue knife. This lends a friendlier profile to the MP-1 and gives it a workmanlike feel. Sort of like the orthotic sneakers old people wear. Its much less aggressive than the original XM-18 line. While there are some design flourishes to elevate the MP-1, at the end of the day this is a comfortable and practical knife if you can get over the weight and thickness of it. This blade cuts well with a high flat grind. The tip is a little lower on this knife but is still surprisingly fine. You can easily pierce materials with it without it being needle sharp. The edge has been ground perfectly.

The MP-1 comes with S35VN blade steel. S35VN isn’t super high end stuff, but it’s totally adequate here. I don’t necessarily need this thing to come in S110V, although I suppose that would be interesting. S35VN is a great higher end working steel. Easy to maintain, yet it holds a good edge, is reasonably tough and corrosion resistant. It has become one of my favorite steels for an EDC knife. Similar to CTS-XHP in that it’s just a good all round steel and you won’t need a diamond stone to bring an edge back on it.

These days I tend to gloss over the knife steel part of the review unless it’s a new steel or I really have something to say (beyond my practical observations and a few general words on the steel itself). If you want a deeper dive into blade steel, chemical composition, etc., then I suggest checking out the knife steel section of the website.

Handle, Ergonomics, and Pocket Clip

This is a full titanium framelock flipper made by Hinderer. That is to say, it’s both beautifully built and totally overbuilt. They started with two thick pieces of titanium for the frame, and sandwiched it between oversize custom stand offs and a large custom pivot. Fit and finish is exceptional. The titanium has been finished to a buttery smooth texture. The edges have been chased with decorative chamfering while the diamond pattern found on the G-10 scales of the XM-18 have been machined in little reliefs on the handles. The blade, backspacer, pocket clip, and handle all have been stonewashed while in contrast the hardware is satin finished, leaving you with a dramatic monochromatic knife.

The handle may be overbuilt for most normal people, but you can’t deny the beauty of it. I especially like the extra details found on this model. The quality of the workmanship reminds me of my old Shirogorov 95-T. We are talking about the higher end of the production pocket knife section. No one “needs” a knife like this, but enthusiasts of high end knives appreciate these in the same way you would appreciate a nice watch, high end leather goods, or any other type of luxury product.

Since this knife was apparently named after a Hinderer’s new Hinderer Modular Backspacer System (H.M.B.S.), I better spend some time to talk about it. This is a backspacer that can be removed with a single torx screw rather than disassembling the entire knife. The backspacer wraps around the stand offs and the torx set screw holds it all in place. The stock backspacer is a geared affair that comes with an oversized lanyard loop, but RHK offers a variety of backspacers that include bottle openers, impact tools, various anodized options, etc. In practice it works as advertised. Its easy to take it out with the turn of my WiHa driver.

Here is a video by Rick Hinderer himself explaining the H.M.B.S. in more detail. I think looking at the below picture will save you the 10+ minutes. It’s pretty straight forward.

Whether it is something you want to play around with is an entirely different story. Some get a kick out of modding their Hinderers with anodized parts, after market filler tabs, new scales, etc. No doubt the MP-1 is designed to cater to that crowd. Personally, I like the stock backspacer, and the knife seems a little empty without it. I probably won’t be buying any additional backspacers, but I can see the appeal. All in all I think they did a good job with the execution.

As I mentioned earlier, the MP-1 is a comfortable knife. You would hope so given how thick it is. While the knife has some ornate flourishes, at the end of the day the handle is simply shaped. It’s comfortable and will accommodate a variety of hand sizes and grips. There is a small forward choil behind the edge that gives you extra options and control. There is flat top jimping on the spine of the blade and backspacer, and the milled handles also provide a little traction. The titanium has a great feel in hand, and overall the MP-1 is a pleasure to hold and use.

The MP-1 features the same spoon style pocket clip of the XM-18 series. That’s nice because it’s a good pocket clip design. Retention is excellent and the MP-1 stays in place when clipped to your pocket. This isn’t a deep carry clip, and the MP-1 isn’t the most discrete of carries, but the knife mostly buries into the pocket. Being a thick and heavy knife, it isn’t going to EDC like a Dragonfly, but it does stay in place and out of the way. This carries as well as any other 6 ounce knife I have owned.

Also, just like with the XM series, the MP-1 is ready for right side tip up or tip down carry. There is a “filler tab” screwed in place near the pivot.

Deployment and Lockup

The MP-1 has an odd combination of thumb studs and flipper. I say “odd” because the thumb studs do not work unless the blade is partially open. I suppose it’s used in the event the flipper does not completely deploy the blade. That’s a real potentiality on the XM-18, which has a notoriously weak detent, but here the detent on the MP-1 is pretty good. The blade opens reliably and I’d say this flipper is a solid “6” on a 1-10 scale (with a 10 being something like the ZT 0454). Action is crisp, but it is possible to occasionally “flub the flip” and get a partially deployed blade. The knife uses teflon washers. Action is smooth and the knife flips open, so I can’t complain.

With the XM series the thumb studs are technically blade stops, so it could be argued that they don’t “need” to work as thumb studs. Here, the MP-1 actually features a set of hidden blade stops that travel underneath pockets milled out in the handle, so the non-functional thumb studs are a little more puzzling. They do come in handy if the blade doesn’t fully open with the flipper. Beyond that I don’t see the point to them.

For lockup we of course have a titanium framelock. This is just bare titanium against the steel tang of the blade. No steel inserts, although you do have the Hinderer lock bar stabilizer peeking out from behind the pocket clip. My lock has been executed beautifully. The lock face is generous and lock up is around 30%. There is no stick, and absolutely no wiggle, lock rock, or blade play of any kind. The MP-1 is rock solid.

Blade centering is perfect on my knife.

Hinderer MP-1 – Final Thoughts

I like the MP-1 and can appreciate it for what it is. It’s high end pocket knife that is unapologetically overbuilt. This will only appeal to a certain type of knife enthusiast: one who appreciates overbuilt knives, and has a fair amount of disposable income. The thing is, the MP-1 has been beautifully executed. Some high end hard use knives are mere “me too” products that boil down to being janky rip offs. Here it’s obvious that quite a bit of thought and skill went into putting the MP-1 together. It may not be office friendly, but it’s beautifully made. It certainly isn’t a janky rip off.

Similar to the Eklipse, I don’t think the MP-1 will enjoy the success of the XM-18 series, but there was something oddly compelling about this knife. Sure it’s heavy and impractical for mere mortals like myself, but it will appeal to those seeking a full titanium Hinderer. And this is a more premium knife than the XM-18. There is extra work here. Extra detail. I obviously can’t speak for everyone, but it drew me in.

Perhaps the customizable nature of the knife will appeal to people as well. I never got into the knife customization thing, but there are guys that are really into that. Although Modifiedz hasn’t posted a video in years, people still seek out “knife pimpers”, and customized Hinderers regularly find their way onto the secondary market. Buying a Hinderer and then buying different hardware and handle scales to make it your own is a thing. The MP-1 could serve as a blank canvas of sorts and takes the concept of making the knife your own one step further.

If this was released a few years ago there would likely be a lot more fanfare. After all, this is a full titanium framelock flipper straight from the Hinderer factory. This is previously the stuff of legends. Even 3 years ago people would have crapped their pants for the chance to buy one at a knife show lottery. Today it’s another option if you are seeking out a high end folder. A lot more options have come onto the market recently, and while I think the MP-1 has been well done, I’ll be the first to admit that this knife is not for everyone.

[easyazon_block add_to_cart=”default” align=”center” asin=”B0773W7LPG” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

I recommend purchasing the MP-1 at Knife Art, BladeHQ, or [easyazon_link asin=”B0773W7LPG” locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Amazon[/easyazon_link]. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Fantoni Hide Review

by Grayson Parker 3 Comments

Last Updated: August 11, 2019
Author’s Note: I wrote this introduction before I saw Dan’s review of the Pohl Force Mike One. Suffice to say that Andrew Gene has long been a scourge on the wallets of knife collectors.

Buy the Fantoni Hide at KnifeArt.com

It may be hard to imagine now, but it wasn’t so long ago that Italian knife companies were a fairly unknown quantity in the United States. Back then, I was introduced to the wide world of European blades by the fantastic videos of the Edge Observer. His review of the Fantoni Hide showcased this beautiful blade to me for the first time, and it wasn’t long before I was calculating how much of my collection I’d need to part with to acquire one. As luck would have it, I didn’t need to resort to such measures.

Normally when I’m trying to explain what draws me to a product, I can point to something tangible. In the case of the Viper Dan, it was the innovative slipjoint mechanism. The Zebralight H52w grabbed my attention with stellar runtimes. That’s really not the case here. I was drawn to the Fantoni Hide simply because I liked – loved, really – the way that it looked. The interplay between the overbuilt handle and the dagger-like blade, the industrial lines and the sweeping curves; all of it combined to grant the Hide a timeless feel not unlike an Al Mar.

I should note that I never expected to write this review. The Hide fell into my hands long before I was writing for Dan, and even after I started it was a bit too esoteric for the site. Fortunately, that’s no longer the case. This sudden shift leaves me in an awkward position. Though the Hide is a grail of mine, I’ve never babied it. It shows its age. For the most part, it has aged gracefully, but after nearly two years of carry it’s taken its licks. I hope this review doesn’t shy away from those bruises, in no small part because it costs 265.00USD. That’s officially enough to qualify as an heirloom knife – at least in my book.

General Dimensions and Blade Details

The Fantoni Hide measures in at 6.89” overall, with a 2.98” blade, a 3.91” handle, is made in Italy, and designed by Italian knife designer Tommaso Rumici. It’s not chunky, but it’s not lightweight either, at 4.1 oz. The back lock and full steel liners are the culprits of most of the weight, and shift the balance to the back of the knife. Weight considerations aside, the Hide is right around the perfect size for me. My daily cutting tasks rarely require more than cutting some tape, opening a package, or slicing an apple. The Hide’s blade is long enough to do all of that without frightening a soul.

As with most Italian knives, the Hide is crafted to impeccable tolerances. The centering, perfect; the grind, immaculate. Even the hardware is polished, with the exception of the exterior bolts. Those were instead given a tasteful bead blast. The stonewash on the blade is highly polished, leaving a blade that will resist most scratches with ease. I’m a big fan of how polished this stonewash is, as it comes close enough to a mirror finish that it has some of the charm of a traditional.

The Hide’s true distinction is its refined blade. The profile is a lean drop point with the barest hint of a recurve and just enough belly to slice as well as any kitchen knife. A long swedge adds visual interest and thins out the tip for any piercing work that needs doing. The grind is similarly impressive. Not only did the craftsmen at Fantoni start with thin stock, but the hollow grind takes it down to an edge not far off from a straight razor. It goes without saying that the Hide isn’t meant for prying or other “hard use” tasks. Don’t get me wrong, it’s a tough knife. But it’s a knife, not a pry bar. Treat it as such.

I’d be lying if I said the steel was exciting. Most everyone these days is familiar with S30V, both its ups and downs. I haven’t noticed any problems with chipping or rust, and it rarely needs more than a few passes on my strop or Sharpmaker. Fantoni claims they get it up to RC60-61, and that matches my experience. Some of you may be asking if S30V is appropriate for a knife this expensive, and my answer is…kind of. In general I’d say no; but generally the heat treatment and grind aren’t nearly so dialed in as they are here. The Hide is among the elite cutters in my collection, so take that as you will.

Handle, Ergonomics, and Carry

The handle is a fairly simple affair. A steel spine is sandwiched between steel liners, which in turn is sandwiched between two slabs of green canvas micarta. There is no contouring, but the edges of the micarta have been chamfered to increase comfort. Micarta and steel are a winning recipe for me, but I understand if you think the materials are dated. If you’re that concerned, the Hide is also offered in carbon fiber and black G10, though I’ll always opt for the micarta. Not only is it the cheapest version, but a good deal of the Hide’s charm would be diminished with a sterile material like carbon fiber.

Discounting the double scallops on the interior of the handle, the Hide is comprised almost entirely of hard lines. Because of that, I assumed that the grip would (at best) be tolerable. I was pleasantly surprised to find that the ergonomics were fine; but as I expected, not without problems. First, the jimping is sharp and wide. Aesthetically pleasing, but not the most comfortable on the thumbs. Second, the pronounced finger guard keeps your fingers a fair distance away from the blade, so choking up for more control is almost impossible. I think this is just part of the genetic makeup of the Hide. It was designed to be a backup tactical knife, after all.

In the pocket, the Hide is -mostly- fantastic. The low-ride, tip up clip ensures discrete and stable carry. In my experience, the clip works well with most pants, but you may need to use a bit of force if you’re wearing thicker work clothes. When not in use, the slim profile helps the Hide disappear into the pocket, despite the relatively high weight. Sadly, the Hide has one flaw in this department: the thumb studs. Not only do they catch on clothing when you’re pulling the Hide out of your pocket, but they get thin enough to yank on any threads that stick out too far. It’s not a constant occurrence, but it’s happened just enough times that it bears mention.

Deployment and Lock-up

By now, I’m assuming that most of you are familiar with my viscerally apathetic sentiments towards frame locks, flippers, and every combination therein. They’re not bad, I’m just a curmudgeon. Or a hipster, depending on your definition. In either case, my love affair with the Fantoni Hide began long before flippers hit their stride, and it isn’t going anywhere now. Apart from the problems mentioned above, the thumb studs work fine. I’ve never disassembled the Hide, but a glance suggests that it runs on bronze washers. The strength of the back spring makes flicking this knife open impossible, but that’s a rare enough feature on quality back locks that I can’t complain.

The back lock isn’t particularly innovative, but it’s strong and easy to use. This iteration is one of the best. There is no play in any direction, and while the spring is quite stiff, it doesn’t make it a hassle to disengage the lock. I do find it somewhat confusing that this is advertised as a back-up knife. When the lock engages, it does so with an audible clack; I’d imagine that sound would make it quite difficult to hide. Ultimately, I can’t sell either the thumb studs or the back lock to those of you who hate such features. If you don’t mind them, you won’t be disappointed.

Fantoni Hide Review – Final Thoughts

If I had my druthers, I would have reviewed the Hide before I reviewed the Dan 2. Such an approach would highlight the evolution of Rumici’s talents as a designer, but wouldn’t paint the Hide in a negative light. To take that approach in the reverse, however, would end up making the Fantoni look quite brutish. Slab handles, or contoured? Proud liners, or nested? Thumb studs, or front flipper? Even I (unrepentant snob that I am) have to admit that the Dan is an improvement in most areas.

But the thing is….I own both. I carry both – frequently, in fact. Despite the fact that I have access to what is, objectively speaking, an upgraded model, the Hide gets as much if not more pocket time than the Dan 2. My best guess for this phenomenon is that while the Dan has a much more elegant design, the Hide feels more refined. Maybe I just need to carry the Dan for a few more years. At any rate, I think it says quite a bit about the quality of the Hide that it has stayed in my collection this long, with no signs of leaving.

So who should buy this knife, assuming that you can find one? If, like me, you’re a grump who thinks flippers are overhyped and frame locks passe, or if you long for the days of thin, slicy grinds, this knife is for you. Collectors of smaller, boutique Italian knives should likewise have their ears to the ground. Finally, if I’ve afflicted one of you with a similar lust for the Fantoni Hide, my apologies–but this knife is definitely for you.

I would recommend buying the Hide at KnifeArt, as they are Fantoni’s only US dealer. As usual, availability and selection is spotty, as Fantoni does not make many knives. You may be also able to find the Hide on the secondary market or places like Amazon or BladeHQ. Thanks for reading.

Ka-Bar Jarosz Folder Review

by Dan Jackson 13 Comments

Last Updated: August 1, 2019
A couple things drew me to the Ka-Bar Jarosz Folder.

First, Ka-Bar doesn’t release a lot of folding knives. They are a knife company best known for their classic USMC combat knife, and have a reputation for being a traditional knife company with a lot of fixed blade designs.

Buy the Ka-Bar Jarosz Folder at BladeHQ

Buy on Amazon

Second, Ka-Bar chose to collaborate with custom knifemaker Jesse Jarosz. Jesse is a maker that I have heard a lot about over the past few years. I have yet to handle any of his designs, so I was excited about the prospect of checking out this collab with Ka-Bar.

What’s interesting about Jesse is his unorthodox handle designs and decision to focus on non-flippers. This may not have been remarkable a few years ago, but these days most custom knifemakers are producing flippers. It has gotten to the point where someone producing a knife that is not flipper has actually become novel. It’s kind of crazy when you think about it.

His folder for Ka-Bar is based on his popular Model 75. This is a no-nonsense function-over-form design that appeared to be a great candidate for a production piece. With that in mind I bought the knife.

General Dimensions and Blade Details

The Jarosz Folder has an overall length of 8″, a 3.5″ blade, weighs 5.25 ounces, and is made in Taiwan. This is a brute of a knife, with a thick blade and full steel liners. 5.25 ounces won’t pull your pants down, but it is substantial, and the Jarosz Folder is more of a weekend carry for me. Of course if you can get away with EDCing a bigger and heavier knife then this could be a daily carry.

The Jarosz Folder comes with your choice of a drop point or tanto blade. I went with the drop point, as that is my preference, and it seemed to hold truest to Jesse’s original Model 75. The drop point blade is simple. It is ground from near 4mm thick steel, and the blade has a saber grind. The knife came surgically sharp from the factory, which is always great to see. The edge is neat, but peters out a little towards the tip. Ka-Bar finished things off with a coarse tumbled finish. This is a durable blade shape. The thick stock provides strength, while the hollow grind allows it to cut efficiently.

Ka-Bar went with Aus8 steel here, which is par for the course for a sub $50 knife. Aus-8 won’t win any edge retention awards, but is fine for a beater blade like this. You probably know as well as I do that Aus-8 is tough, easy to sharpen, and corrosion resistant. It’s a good budget steel and Ka-Bar gives you plenty of it. I have used the Jarosz Flipper to for several projects, and have broken down a fair amount of cardboard with this knife. It slices well, stands up to hard use, and has proven to be a great work knife.

Handle, Ergonomics, and Pocket Clip

The handle is comprised of fiberglass reinforced nylon (FRN) scales over full steel liners. There is a partial FRN backspacer that straddles a lanyard pin.

Handle construction is solid, but not perfectly executed. My handle scales were slightly proud of the liners in some spots, and the edges of the scales are rough. It was odd enough for me to post an inquiry about this on BladeForums to see if others shared that issue, or if I was just unlucky.

The feedback I received suggested that I was unlucky. Jesse himself was kind enough to post in the thread and recommend that I loosen the screws holding down the scales and nudge everything in place, or send the knife in for service. Adjusting the scales worked, and the problem mostly went away. In retrospect this seems pretty obvious but I haven’t run into the issue before. That said, the edges of my scales still catch the skin of my fingers slightly; especially the scale behind the locking liner. It’s not unpleasant, and it actually provides a little traction. Also, it is not noticeable when using the knife.

Once I resolved the issue with the handle scales I began to appreciate the sensible ergonomics of Jesse’s design. This is a funky looking handle, but in practice it works well. The handle shape is comfortable, and provides plenty of space for a wide variety of grips and hand sizes. There is a row of toothy flat-top jimping on the spine of the drop point version, and the FRN handles provide traction without being abrasive. The slightly rough edges of the FRN scales provide additional grip.

The pocket clip is an adaptation from the custom knives, and is a spoon style clip with Jarosz’s geometric logo. The clip is right side only, but is allows for tip up or tip down carry. It is uncoated stainless steel, but appears to have been tumbled to make it less shiny.

The Jarosz Folder carries OK. This is a substantial knife. I found that the combination of lightly textured scales, heavy knife, and light spring tension of the clip meant that the Jarosz Folder would continually slide down towards the base of my pocket. I mostly wear shorts with V pockets, and prefer to keep my knives higher up on my pocket for concealment and ease of accessing my wallet. This knife required regular adjustment.

Deployment and Lockup

The Jarosz Folder makes use of dual thumb studs and teflon washers. The blade is heavy and the detent is strong. You can flick open the blade, but it takes a fair amount of force. This is not a knife for the weak thumbed. The action is smooth, but I am not a fan of teflon washers, and would prefer phosphor bronze washers here. I am also not a fan of the decorative pivot on this knife. It’s nice and large, but Ka-Bar does not include a tool to adjust it. I don’t see this pivot on Jesse’s customs, so I don’t know where it came from. The good news is that the blade centering is excellent so there was no need to adjust the pivot out of box.

This knife makes use of a stainless steel liner lock. The liner lock is substantial and it engages the blade about 50%. The end result is a sturdy lock free of play in any direction. Initially my lock exhibited a slight amount of stick, but it has broken in and smoothed out over time. This is a solid liner lock.

Ka-Bar Jarosz Folder Review – Final Thoughts

Although I have raised some quibbles about the Jarosz Folder I think the pros outweigh the cons and this is a great work knife. In a perfect world I’d prefer a stronger pocket clip, a pivot with “regular” hardware, and phosphor washers, but when you get this knife in hand and actually cut stuff with it the design really comes together. It’s comfortable like a good pair of leather boots. I may not care for some of the details, but can’t argue with the results.

This is also a substantial knife designed to take some punishment. This is a hard use tool, not a slim daily carry, and that is OK if you know what you are getting into. Not every knife needs to be modeled after the Spyderco Delica. The unorthodox nature of the Jarosz Folder is part of what I enjoy about it, but it has also made this a tough knife to review.

Despite the Jarosz being unorthodox, I still want to contrast it with some other offerings that sell for around $40. Cold Steel offers the Pro-Lite and Voyager. These are 2 AUS-8 and FRN handled knives that are also tough. The Ontario RAT I is another excellent choice at this price point with similar construction and materials. You can venture into the $50 price bracket and find gems like the Blur and Aus-8 American Lawman.

While there are plenty of options to consider at the crowded ~$40 price range, I think the Jarosz Folder will appeal to the right buyer. This is especially true if you are looking for tank like construction. I don’t recommend it if you are looking for a lightweight every day carry. It is not that kind of knife.

The execution is not perfect, but the design is solid. This is a successful collaboration, and a good introduction to Jesse Jarosz if you don’t have the coin for one of his custom pieces.

Recommended if you are interested in Jesse’s designs, and want a no-nonsense work knife.

KA7505-BRK Jarosz Folder

Country of Origin: Taiwan
Package quantity: 1
Product type:KNIFE
Package dimensions:5.25" (L) x 2.0" (W) x 1.0" (H)

I recommend purchasing the Ka-Bar Jarosz Folder at Amazon or BladeHQ.

Pohl Force Mike One Review

by Dan Jackson 4 Comments

Last Updated: July 31, 2019
I have lusted after the Pohl Force Mike One for years. I wanted one for years. For the uninitiated, Pohl Force is a tactical knife company owned by Dietmar Pohl, a long time knife collector, knife designer, knife enthusiast, and author of books on knives. I have met with Dietmar, and the USA distributors for Pohl Force a couple times at Blade Show.

Buy Pohl Force Knives at BladeHQ

It was hard to walk away from the Pohl Force booth without a Mike One in hand, and I eventually broke down and bought one. I’m glad I did. Even 3 years later this knife is still awesome and unique. It’s like a European Strider with its integrated G10 handle scale/backspacer, not to mention the unique profile and finish work. But I’m getting ahead of myself. There is a lot to consider with the Mike One and I’m glad to present this review, even if I’m a little late to the Pohl Force party.

General Dimensions and Blade Details

The Mike One has an overall length of 8.66″, a 3.74″ blade, weighs 5.64 ounces. The Mike One is made by Lionsteel Knives in Maniago, Italy. This is advertised as the “EDC size” Pohl Force folder, and it certainly seems to be EDC (Every Day Carry) sized next to the Foxtrot One, which is a massive knife featuring a 4.5″ blade and overall length of 10.25″.

This Mike One is still a formidable knife, but could be a good size for EDC if you are a police officer, military member, or anyone else who can get away with a larger daily carry blade. Personally, this is not a daily carry as I tend to favor knives in the 3-3.5″ blade range for EDC.

The Mike One sports a slender drop point blade with a high flat grind and swedge. This is a 5mm thick blade, which is quite beefy for a folding knife. While Lionsteel has done a nice job grinding the blade to a thin edge, this is still a stout blade with hard use in mind. The tip is formidable and there is plenty of cutting edge. It strikes me as a great well-rounded blade shape that could be pressed into a wide range of tasks.

My particular version of the Mike One is the “Outdoor” version with the stonewashed finish. There is also a black PVD coated “Survival” version. I favor this stonewashed version. The blade is still quite reflective despite the tumbled finish, and you can almost use it like a mirror.

Niolox is the de facto steel for Lionsteel’s outdoor focused blades, and it’s a nice choice on this Mike One. I have some experience with Niolox after extensively testing the Blackwater Grizzly 6 and Ursa 6. Niolox has proven itself to be tough, yet reasonable to sharpen and resistant to corrosion. I think it’s a great choice and I’m excited to have the steel in a folder. I consider it to be a good upgrade over something like D2, with improved stain resistance.

Handle Design, Ergonomics, and Pocket Clip

As I alluded to earlier on, this knife comes with a beautifully sculpted black G10 handle slab and backspacer. Just like on the Strider SnG, this is a single piece of G10 that forms both the backspacer and non-locking side of the handle. Lionsteel kicked the production values up a notch by putting finishing the handle with a grooved pattern and also machining a geared backspacer. An equally impressive titanium framelock and black chain ring bolt hardware add further detail and visual interest to the handle. They did an awesome job and in my opinion, the build quality and finish work is higher than on that of the Strider.

The 50/50 forward finger choil and dual thumb ramps offer the end user a ton of grip options. You can choke up on the blade for detail work, or choke back for leverage per the below picture. Regardless of how you hold the knife it always feels comfortable and natural. The milled handle and backspacer compliment the handle design nicely by providing good traction without being irritating. There is little jimping, and the knife is comfortable to use, even after extended heavy cutting tasks like carving and push cutting rope.

The Mike One features an oversize wire clip. Frankly I wasn’t aware of how much some people loathe the Spyderco wire clip. One commenter said that the Spyderco wire clip was “feeble” and that I was “feeble” for liking it. You gotta love the internet – that’s a strong opinion on a pocket clip!

At any rate, the Mike One’s wire clip is nothing like the Spyderco version, so if you don’t like the Spyderco clip you may like the clip on this Mike One. For starters, it’s a much stronger clip. The knife has great retention in the pocket between the tough clip and corrugated handle. This clip has some pant shredding potential, but it will never fall out of your pocket. While not a true deep carry clip, the Mike One still buries deeply and carries discretely thanks to the matte finish and stealthy nature of wire clips in general.

Despite this being a near 6 ounce knife the Mike One carries well thanks in large part to the sturdy clip. I occasionally forget I am carrying this one. I wouldn’t carry this in slacks, but for shorts, jeans, or work pants you will find that the Mike One behaves well in the pocket.

Deployment and Lockup

The Mike One makes use of a serrated thumb disk. Thumb disks are not my favorite method of deployment, but it works here. The thumb disk is removable, which makes the knife a 2-hand opener, and more appropriate in some of European countries. The action is slow and purposeful thanks to teflon washers. Again, teflon washers are not my favorite choice. I really would like to see phosphor bronze washers here, as I think the knife would open a little easier with them. The end result is that you have a knife that takes a fair amount of effort to open – especially when compared with the flippers of today. This is probably my biggest gripe with the Mike One.

This is a titanium framelock, and here we have no steel insert. Lockup is extremely secure, opening with a heavy “click”. There is no blade play in any direction. Nor is there any blade stick. As far as titanium frame locks go, I think this one has been well executed. The end result is impressive and tank like. The Mike One is all business, and that shows in the deployment and lockup.

Here is a shot of it next to my LionSteel TM1:

LionSteel did include their RotoBlock mechanism on the Mike One. The RotoBlock is an over travel stop that prevents the user from hyper-extending the lock bar, and it can also be twisted to lock the knife open. It’s an interesting feature, but not one I ever find myself using. It’s probably handy if you ever decide to test the limits of the Mike One. For regular guys like myself it will probably get in the way more than it will help. Blade centering is good on my knife. Not perfect, but pretty close.

Pohl Force Mike One Review – Final Thoughts

This review has been several years in the making, and I am glad to finally have one in the collection next to my Fantoni CUT Flipper and LionSteel TM1. This is another a unique and practical design that has been executed beautifully.

I prefer this smaller format to the larger FoxTrot One. I handled the FoxTrot One, and it’s almost comically large. While the Mike One is a more practical EDC than the FoxTrot One, I wouldn’t mind seeing something even smaller. 3.5″ blade is about as big as I will go for EDC, but I realize that Pohl Force is catering to more of a military and LEO crowd. So while this is more of a collectible for me than a daily carry, it is a fully functional knife and designed for use.

I also like how Pohl Force goes so far as to include an oversized zippered pouch, a “Zertifikat” of authenticity, and even a Tuff Cloth and a kydex sheath. Everything about the Mike One is top shelf, and clearly a lot of thought and care went into all aspects of this knife.

Although Pohl Force has ceased working with dealers effective June 2016, you can still find Pohl Force Knives at BladeHQ or possibly Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Freeman Outdoor Gear 451 Flipper Review

by Benjamin Schwartz 6 Comments

Last Updated: August 5, 2019
Few of us have the money to shell out hundreds of dollars for every knife we think we might like. We have to cull the herd. Maybe we splash out for a promising ‘Maybe’ every once in a while, but 80% of the time we go for the sure thing. Most of the knives I skip I forget about, with nary a second thought given them. But every so often a Maybe knife won’t be forgotten. It lingers in the memory and asks me over and over again, “What if you’re missing out on something special?”

Buy Freeman Outdoor Gear at BladeHQ

Such was the case with the Freeman Outdoor Gear 451 Flipper. I heard good things, and admired the flipping action, unique aesthetic, and button lock mechanism from afar. My cursor would hover over the “Add to Cart” button on the Freeman website, but I never could quite commit. Thankfully, a friend and fellow gear geek offered to send his 451 my way to try out.

After wondering for years what this knife is like, I’ve had a chance to try it out, and the news is mostly very good. The Freeman 451 flipper manages to bring a unique set of features to a section of the market that is saturated with a lot of sameness. It goes deeper than a straightforward recommendation, but there’s a lot of interesting things to cover.

General Dimensions and Blade Details

The 451 has a blade length of 3 5/8”, a handle length of 5 1/8”, an overall length of 8 13/16”, and is made in the USA. There are bigger blades than the 451, but this pushes up right against the limit of what I would consider reasonable proportions for something that folds and is meant to be carried the pocket. That is strictly a function of the 451’s overall shape, however: at 5.5 oz. it’s actually quite light for its size.

The market is so rife with drop points that you think I’d be sick of looking at them. However, the proportions and grind make the 451’s blade shape memorable and useful. This feels like a blade that can take a beating , with thick blade stock and a lot of material brought right up behind the edge, but the grind is masterful: a mirror-polished secondary bevel that is nice and wide without being thin or brittle. The result is a combination of toughness and slicing ability that is rare in big blades. This is probably as good a balance as you’re likely to see on a knife this size.

The striations on the blade are bound to polarizing. I actually think they’re look pretty good, and they make cutting through choky material like cardboard easier. The knife almost ‘revs up:’ the longer the pull through material, the easier it gets. They might cause issues with long-term sharpening, but other than that I can’t complain.

Steel here is D2. This is a venerable tool steel that I have had very little experience with before now. The edge was very clean and very sharp. I think the thick stock and wide-but-not-narrow edge bevel really accentuate D2’s edge holding ability while minimizing its reported tendency to chip. In another smart move Jeff Freeman chose to Cerakote the blade. As a semi-stainless tool steel, rust is a concern with D2. In an uncoated blade the grooves would give me pause; I can see moisture creeping into them and wreaking havoc. Thankfully, between the coating and the mirror polish on the bare edge, I’d say you’re pretty much protected set barring grossly neglectful behavior.

Handle, Ergonomics, and Carry

The handle on the 451 looks like your average one finger groove affair, but that isn’t quite how it feels when you’re holding it. That finger groove is huge. It can accommodate two fingers, actually, but it works best with one finger in it. Holding the knife naturally, the pointer finger rests at the very bottom of the groove. This gives your knuckle some clearance so it isn’t butting up against the flipper tab – something that so many flipper knives neglect to do.

In terms of control, it’s good. Your hand is situated pretty far back. You undoubtedly lose fine control, but fine cutting tasks aren’t the 451’s calling. I used to think that all big knives that couldn’t also do fine cutting were needlessly sacrificing something, but that’s not true. Just because the PM2 can function as an EDC doesn’t mean that all larger knives have to, and really the PM2 is just barely a big a knife anyway. The 451 is much more clearly meant for specific kinds of tasks, and in those tasks the ergonomics are great. There’s a sort of finger choil on the blade itself as well, but I found it a little too close to the edge for my comfort.

The 451 carries quite well for a big knife. You could EDC it if you wanted and not be totally displeased with the in-pocket feel. But where I think the 451 excels is in its lightness and narrow frame relative to other hard-use big blades. You aren’t going to feel like you have a paperback strapped to your thigh carrying the 451 on a hike. The aluminum frame is gentle on your pockets and the titanium clip is adequately-tensioned and beefy as hell.

Deployment and Lockup

I don’t think flippers are, in any way, an improvement over thumb studs or opening holes. I tend to think that they are in fact actively worse. They often muck up the ergonomics of a knife, and they always make it a worse carry. The 451 makes its flipper as agreeable as possible.

It deploys surely and swiftly every time. The weight of the blade and the strength of the detent make the 451 a snappy and sure flipper. You have to try to mess up the flipping in order to get the 451 to not lock up. It’s hard to do.

The button lock is still something of a novelty in the knife world, isn’t it? Hogue has been using it with success, but other than that the only non-automatic production maker using button locks regularly is Gerber. Maybe this is a vestige of Freeman’s influence on the company (he was head designer there for many years), who knows.

Either way, the Freeman clearly believes in the button lock, and it’s easy to see why. On the 451 it is strong, secure, and easy to engage/disengage. Your fingers don’t have to be in the blade channel to disengage it – a major positive given the free-swinging blade. There is variability in the amount of play I get when I lock the 451 up, but it’s never enough play that I care. The button lock also sticks to greater or lesser degrees depending on how hard you flick it. I think these are characteristics of the lock design, and not indicative of poor fit and finish or tolerancing.

In many ways this button lock reminds me of the Axis Lock. It’s probably slightly worse than the Axis, if only because it isn’t ambidextrous, but I never doubted its strength or security, and I am happy to see something in this price range without a frame lock.

Freeman 451 Flipper Review – Final Thoughts

I’m glad I got to try out the 451 flipper. It answers a question I’ve been asking for a long time: Is it a good knife? The answer is a definite yes. Would I buy one for myself? That’s a tougher call. When the 451 first came out, it was a little cheaper ($200 instead of $225), and the market was way less competitive. If you’re looking for a big high-end knife there are a lot of choices out there at or under the same cost, some with better features like S35VN steel – which you can get on the 451, but for a significant premium that puts the knife well outside of reasonable.

If I had bought and reviewed the 451 when I first learned about it, it would have my unreserved recommendation. What a difference a couple years and $25 can make! The 451 is still a competitive knife in a lot of respects. The materials are simple but very well-executed. It’s nice and light for its size without sacrificing any sort of durability. And personally, I think it’s a really cool-looking knife. I can’t say that the 451 is a must-buy, but definitely don’t ignore this knife when you’re looking for something big and bold.

I recommend purchasing the Freeman Outdoor Gear 451 Flipper at Amazon, KnifeArt, BladeHQ, or you can buy it direct from Freeman Outdoor Gear. Thanks for checking out the review.

Cold Steel Code 4 Review

by Dan Jackson 5 Comments

I have slowly worked my way through most of Cold Steel’s standard folders. I have reviewed the Voyager series, the Recon 1s, the American Lawman (probably my favorite), and even some of their more colorful offerings like the Spartan and Rajah III.

Buy the Cold Steel Code 4 at BladeHQ

Buy on Amazon

For some reason it has taken me a while to get to the Code 4 line of knives. The Code 4 series is different because they come with slim aluminum handles rather than G10 or plastic. Cold Steel advertises this as a police officer’s duty knife. Apparently a “Code 4” is police radio code for “No further assistance necessary”. Heady stuff.

At any rate, the knife is supposed to be light, slim, and tough. Functional yet easy to carry. That all sounds good to me. And once Cold Steel announced that they would upgrade the Code 4 to CTS-XHP I knew that I needed to make this model a priority. Soon enough I had one at my doorstep for review.

General Dimensions and Blade Steel

The Code 4 has an overall length of 8.5″, a 3.5″ blade, weighs 4.3 ounces, and is made in Taiwan. While it’s no Large Espada, this is still a big knife. Too big for me to EDC at the office, but certainly a good choice for the weekends or working in settings where a larger knife is appropriate. I can see where the Code 4 might make sense for a first responder or military member.

It is also worth mentioning that this is another clean and functional Andrew Demko design for Cold Steel. I have become a big Demko fan over the years, and think he has contributed a lot of great designs to the company.

Cold Steel offers the Code 4 in 3 different blade shapes: clip point, spear point (shown here), and tanto. I settled on the spear point because I think it is the most utilitarian looking of the 3, and I used my Code 4 as an EDC and work knife.

Cold Steel also offers the Code-4 with either a plain edge or partially serrated edge. I prefer plain edges, especially if the knife is coming in a high end steel like CTS-XHP. Plain edges are easier for me to maintain and a quality steel like CTS-XHP will hold a good edge for a long time. No need for serrations for what I need to do, but that comes down to personal preference.

My knife came with a high hollow grind and a swedge (top false edge). The blade has been given an attractive 2 tone satin finish. It has held up well under normal use.

The big draw to this new version of the Code-4 is that it comes with CTS-XHP blade steel. CTS-XHP is a high end steel from Carpenter. I have a good amount of experience with CTS-XHP at this point, and I think it’s a good steel. Offhand, I would compare it with something like CPM-154.

The CTS-XHP blade steel on my knife came with an aggressive edge. The knife attacked cardboard, rope, and wood. The blade is a little over 3mm thick, but has no problem cleanly slicing apples and paper. Edge retention has been excellent. CTS-XHP is a significant upgrade over the old AUS-8 blade, but also comes at a significant bump up in cost (it seems to be anywhere from 50%-75% over the old Aus 8 version, depending on where you shop). CTS-XHP is also easy to sharpen. I think that it is an all around smart choice for a working knife.

Handle, Ergonomics, and Pocket Clip

The Code 4’s handle is aluminum handle slabs with stainless steel hardware, a stainless steel lock bar, and an aluminum backspacer. While the handle slabs are a raw bead blasted gray, it is interesting to note that the backspacer is actually anodized golden brown. The end result is a handle that is simple, thin, and elegant.

The handle is also beautifully finished. The edges are all gently chamfered, the hardware is all perfectly inset. This is an immaculate knife. This is also a strong knife. With full metal construction I would wager that the Code 4 is one of Cold Steel’s stronger folding knives.

The ergonomics of the Code 4 is perhaps the knife’s biggest caveat. The design is fine, with a generous handle, 2 finger grooves and a slight thumb ramp, but because the knife is so thin I found the Code-4 uncomfortable to use for more than a minute or so without gloves. It is fine if you are going to open up a box or do some light foodprep, but if you plan on breaking down a bunch of cardboard or working on some serious carving you are going to want some gloves. The thin handle is great in the pocket, but bites into your hand.

Depending on how you intend to use the knife, this may or may not be a problem. For those that are wanting a self defense blade, this may not be an issue. But if you work at a warehouse and break down boxes for a living, I would go for a knife with a thicker handle, like a Large Voyager or Recon 1.

Although the Code 4 may not be the most comfortable knife in hand, it feels great in your pocket. It’s slim and discrete, and is likely ideal for someone like a police officer who carries a lot of gear and doesn’t have room for a massive pocket knife. At 4.3 ounces the knife is lightweight relative to its size and strength.

Cold Steel drilled and tapped the handle for tip up ambidextrous carry, and included 2 pocket clips for the knife. The pocket clips are simple steel clips, have good spring retention, and they work well. One nice thing about the lightly textured aluminum handle is that it does not tear up your pants like peel-ply G10.

Deployment and Lockup

The Code 4 comes with ambidextrous thumb studs. This is more like one and a half thumb studs, just like on the the American Lawman. The thumb stud is reversible with a flat head driver. There are phosphor bronze washers inside the handle, and the blade opens smoothly, and without too much effort. With that said, there is still a hefty backspring to overcome. This is not an easy knife to flick open. It can be done with practice, but won’t be a knife that you mindlessly flick open all day long.

The Code-4 comes equipped with Cold Steel’s infamous Tri-Ad lock. For the uninitiated, this is a lockback reinforced with a stop pin. Cold Steel has come under scrutiny lately over a gauche series of videos “comparing” the Tri-Ad lock to other locks on the market (where the Tri-Ad lock comes ahead by a wide margin). I am not sure what the value of these tests are when you consider the real world applications of a pocket knife, but it certainly has people talking.

Like all of the other Tri-Ad lock knives I have reviewed, this is a strong locking folder. There is not a suggestion of play in any direction on my knife. The lock is also reasonably to disengage, and doing so won’t kill your thumb. I am a fan of the Tri-Ad lock, and it is well executed here.

Blade centering is perfect on my example.

Cold Steel Code-4 – Final Thoughts

I am not sure why it took me so long to examine the Code-4, but I am glad I waited for the CTS-XHP version to come out. While the Code-4 is similar to knives like the Recon-1, the choice of aluminum for the handles over G-10 results in several important functional differences. The knife is super slim and easy to carry. I like that aspect of the Code-4 a lot.

What I am less enthused about is how the thin handle quickly becomes uncomfortable if you try to use the Code-4 for an extended cutting session. Gloves mitigate this somewhat, but this is an important point to mention. So often you hear reviewers (myself included) done on about how important it is for a pocket knife to be slim and light for easy carry. I still largely agree with that, but it’s important to understand that sometimes slimness has a price. In this case that price is comfort in hand. For that reason the American Lawman and Ultimate Hunter (both shown above) with their G10 handles won’t be leaving my collection any time soon.

I still think the Code-4 is an excellent tool and I intend to keep it in my collection. It’s like an upgraded Boker Titan Drop. If you primarily carry it for light utility and perhaps self defense (eg, as a police officer might carry it), then I think there is a lot going for the Code-4. It’s strong, intelligently designed, and nicely made. This is a no-nonsense tool, and I have no doubt that it will hold up for a long long time.

I recommend the Code 4 if you are seeking a long, slim, and strong daily carry folder, and don’t mind donning gloves for longer cutting chores.

Cold Steel Code 4 Spear Point Folding Knife

Made of highest quality material
Manufacturer: Cold Steel
Cold Steel Code 4 spear point plain edge 3.5in folding knife

I recommend purchasing the Cold Steel Code-4 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.