Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

Boker Plus Urban Trapper Review

by Dan Jackson 32 Comments

If you have been following knife trends at all, you will know there is big interest in both titanium framelock flippers and traditional folding knives. So it shouldn’t take a rocket scientist to come up with the idea of combining these two trends, but they have really been viewed as two mutually exclusive phenomena. That is of course, until now.

Buy the Boker Urban Trapper at BladeHQ

Buy on Amazon

Enter the Boker Plus Urban Trapper. Designed by fellow Floridian and custom knife maker, Brad Zinker, the Urban Trapper is exactly what it sounds like: the melding of a traditional trapper pattern with modern features and materials. The end result, is everything you love about traditional folders (their light weight, and wickedly thin blades) combined with the bells and whistles of a titanium framelock flipper.

It sounds great, but given Boker‘s quality control issues some might pass this model over. That would be a mistake. This is arguable the best knife I have handled in 2015. No joke. Boker has had a spotty history with quality control, and their titanium framelocks have been notoriously bad, so I probably have my work cut out for me if I am to try and convince you that this is the best production knife I handled in 2015, but they absolutely slammed this one out of the park. Let me explain to you why.

General Dimensions and Blade Details

The Urban Trapper has an overall length of 7.75″, a 3.5″ blade, and the all titanium version (shown here) weighs a mere 1.78 ounces, is made in China, and currently retails for around $60. The knife is insanely light yet still packs a healthy 3.5″ blade. I am not one to bother with blade to handle ratios, but Brad used up every spare millimeter when cramming the blade into the handle. The end result is both thoughtful and elegant.

The Urban Trapper was designed to be an Every Day Carry (EDC) knife, and I have used mine in that capacity. Although the blade is on the long side, but it’s thin profile means I have not had any issues using the Urban Trapper in public. I think you could also argue this is a gentleman’s folder.

The blade of the Urban Trapper is an elongated clip point, featuring a lean clip with a thin swedge. It is definitely a modern take on a classic blade pattern, and isn’t your grandpa’s clip point. Most of the spine is taken up by the swedge, but the part that isn’t is capped (rounded). The blade has a high flat grind and precise tip. I have always found clip points to be utilitarian, and this version is no exception. The tip is excellent for detail work, and the thin grind slices like a traditional folder (meaning, it slices wonderfully).

An interesting detail on the knife is the satin finished blade. If you watch YouTube knife reviews of custom folders, you will invariably hear the reviewer go on about how the knife is “the best flipper I have ever handled” and/or gush over the “hand rub satin finish”. While I think both of those reviewer tropes are more than a little tired, I can’t deny that the blade is well done and the satin finish, running horizontally from ricasso to tip, was intended to mimic the hand rubbed finish of a custom offering. It’s a nice touch, especially at this price point.

Boker went with VG-10 steel for the blade, a middle of the road Japanese stainless. I don’t mind VG-10 on this knife given the price point. I have used my Urban Trapper quite a bit, and have had the chance to test it on a variety of materials. It’s great for breaking down boxes, and slices apples with ease. Speaking of slicing, the thin flat grind is a tremendous slicer, much like many of the traditional folders I have used like the Indian River Jack or Alox Cadet.

The UT also held up well as a utility knife. I have used the knife for several home improvement projects, cutting thick plastic and even wire in a pinch. I don’t recommend cutting wire with the Urban Trapper, but I didn’t have anything else on me at the time. The knife held up fine, although the edge definitely rolled. VG-10 will not hold an edge forever, but it’s an easy steel to sharpen. No issues with rust, and I routinely rinsed the knife out in the sink after using it.

Handle, Ergonomics, and Pocket Clip

There are a surprising number of details to enjoy when examining the handle of the Urban Trapper. The handle is comprised of 2 pieces of titanium and a single stand off. All of the edges have been neatly rounded, and a series of holes have been drilled into the handle to provide visual interest and lighten the knife. The holes are countersunk and the edges have been given a mirror polished edge. Everything has been executed flawlessly. There is a nice decorative pivot, and the seat of the pocket clip is inlayed into the handle. The titanium is given a tumbled finish which hides wear well. For a simple slab built handle, Boker did a lot to bring Zinker’s custom design to life.

If naked titanium is not your thing, Boker is also offering the UT with a variety of handle covers including Cocobolo, G10, and carbon fiber. I haven’t checked these out yet and prefer this minimalist version.

The Urban Trapper is a thin and lightweight knife, but it’s not cramped for space. I am able to get a comfortable grip on it without any issues. That said, there is not much in the way of traction on the handle. The stonewashed finish offers a little feedback. There is no jimping. It would not be my go to knife for a 3 month expedition through the Amazon, but it’s fine for urban EDC. I would suggest using this knife the same way you would use a slip joint. That said, I have gotten a lot of work done with the UT and I can say with confidence that this knife is comfortable for normal use.

The Urban Trapper comes with a nice fold over deep carry titanium pocket clip. The handle has been milled so the clip slots in to it and is held in place with 2 flush mount screws. This is nice because there is nothing for your pocket to get caught on when you insert the knife into your pocket. The drawback is that the knife is set up for right side tip up carry only. Not a big deal for me, but worth mentioning.

The UT carries well. At under 2 ounces you quickly forget it’s in the pocket. The knife is wafer thin and the clip is very unobtrusive. This is a fantastic knife for my style of daily carry.

Deployment and Lockup

The flipper tab on the Urban Trapper may take some getting used to. It’s squarish and has jimping, and I find that the knife opens best when you “light switch” the flipper by resting your index finger on the corner of the flipper tab. Personally I never had any problems getting the knife open, and I am able to push button the flipper too, but in reading up a bit for the review I noticed some people complain about the flipper. It works fine for me. The detent is solid and the knife is on a bearing system. It flips well, and fires hard. The action is smooth to the point where I can shake the blade closed.

For lockup we have a simple titanium framelock. There is no steel insert. Just simple titanium on steel. My knife locks up early (around 20%) and is secure and without play. This is after opening the knife hundreds of times and beating on it in a series of little remodeling projects. I realize Boker does not have the best track record with their titanium framelocks, but this Urban Trapper is trouble free after a couple months of use. I plan on keeping the knife and will update the review if anything changes.

Blade centering on my knife is basically perfect. The pivot has loosened up a couple times, but a twist of my allen wrench brings things back to true.

Boker Urban Trapper Review – Final Thoughts

Although I think it was released in 2014, the Urban Trapper is on my short list for “Best Knife of 2015”. For $60 I consider it a production folder masterpiece, blending two of the current hottest trends in knives while coming in at the notoriously tough $50-75 price range. When I first got the Urban Trapper I immediately compared it with another favorite of mine: the CRKT Swindle. The knives share some similarities: they are slim, inexpensive, bearing equipped framelock flippers. The Urban Trapper sells for twice as much, but I think it’s twice as nice of a knife. It’s much lighter and the pocket clip is way better. Well worth the price premium in my book.

And let me attempt to put any quality control fears to rest – my Urban Trapper has been problem free, and that seems to be par for the course based on my research. The fit and finish is excellent. There is no blade play, lock rock, or anything like that. Say what you will about Chinese knives, but this one is dialed in. The Urban Trapper truly is a combination of the things I love most about traditional folders (their pocketability, people friendly profile, and thin blades) with all of the creature comforts we have come to know and love with framelock flippers (one hand opening, pocket clips, lightweight materials). For $60 it’s a no brainer.

The Urban Trapper comes with my highest endorsement. It easily makes its way onto my best EDC knives page. There are nicer more expensive knives out there, but the Urban Trapper is a perfect storm of price, workmanship, and performance. This is something everyone can appreciate. Buy it and enjoy it. You can thank me later.

Sale

Boker Plus 01BO730 Urban Trapper Knives with 3-1/2 in. Straight Edge Blade, Silver

Vg-10 premium steel blade
Titanium frame lock
8mm grip thickness

I recommend purchasing the Boker Plus Urban Trapper at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

DPx Gear HEAT/F Review

by Dan Jackson 18 Comments

Last Updated: August 3, 2019
It has been a long time since I have examined a DPx Gear product. You may recall a review done on the HEST back in 2012. This was DPx’s first effort, and is the knife that put them on the map. The HEST is a solid tool and is well made, but there was a lot going on in terms of integrating various multi-tool features. There is nothing wrong with attempting to push the envelope and bring something new to the table, but the HEST was a DPx’s first crack at bringing a production knife to market.

Buy the DPx Gear HEAT/F at BladeHQ

Buy on Amazon

The HEAT is a more recent offering. First of all, this is a knife, not a multi-tool. I happen to like that. The idea was to shrink down the HEST to something a little more gentrified and pocketable, yet retain the distinctive styling of the HEST. I have long had an affinity for “little big knives”, and I still enjoy pocket knives that are small but stout. Sadly I have little use for a knife like the HEST in my day to day dealings, but the HEAT is something I could get away with carrying. I suspect I am not alone with that dilemma, which is why I was curious to get my hands on a HEAT.

General Dimensions and Blade Details

The HEAT has an overall length of 6.25″, a 2.375″ blade, weighs 4.15 ounces (4.35 for the full titanium version shown here), and is made in Maniago, Italy. The knife was made for DPx Gear by LionSteel. Clearly the HEAT was designed to fit into the role of an every day carry (EDC) piece, although it is very stout, and is not just built for opening up letters or slicing fruit. I have been carrying and using mind in as an EDC knife.

My particular knife is the full titanium 3-D machined version. The 3-D machined handles are stunning. DPx also offers the knife in a less expensive titanium/G10 combo and a titanium/carbon fiber version as well.

The blade is a simple drop point with a high flat grind and your choice of stonewashed or phosphate coated blade. Blade thickness is just shy of 4.6mm – very thick, especially for a sub 2.5″ blade. While the HEAT does not slice like an Alox Cadet, I found it plenty adequate to cut up apples, break down boxes, and even open the odd letter or two. Still, those expecting their pocket knife to produce translucent slices of tomato will have to look elsewhere – the HEAT is simply not that kind of knife. I’d say it slices better than a Strider SnG, but still remains below average in slicing ability. That said, the blade is above average in toughness and the integrated cap lifter / wave feature is a testament to that.

DPx went with Niolox steel, a steel I checked out in reviewing the Blackwater knives a few years ago (since discontinued under the Blackwater brand, but apparently rolled into DPx Gear’s regular lineup). When I tested those knives I found that Niolox held a good edge that was tough yet easy to maintain – an ideal balance for a largish fixed blade.

This is my first experience using Niolox on a folder. This is a servicable steel. It takes a very fine edge, holds it respectably, and is not difficult to sharpen. I might describe it as a tougher 154CM or CTS-XHP, which puts the steel in excellent company. A good choice for a tough little knife that doubles as a bottle opener. I had no issues with corrosion. Like all of my EDC knives, I find it is best to maintain the edge regularly rather than wait for the knife to dull completely. Between my strops and fine Sharpmaker stones, I have had no trouble maintaining a hair shaving edge on my HEAT/F.

I know the knife is also offered in Sleipner steel and D2. I have heard good things about Sleipner but confess that I do not have much hands on experience with it. D2 is perhaps a more well known US tool steel. It’s a hearty “semi stainless” steel that has high toughness but can be difficult to sharpen. I’d go for Niolox or Sliepner if I had the option.

Handle, Ergonomics, and Pocket Clip

The standard HEAT arrives with G10 and titanium handles. The lock side is full titanium, while the show side is your choice of green or black G10. My version features full 3-D machined titanium handles, featuring a beautiful diamond pattern. LionSteel is known for their ridiculous machining capabilities, and this all Ti version of the HEAT/F takes full advantage of that. The handles are curved, contoured, and wonderfully finished. Rounding things off are 3 standoffs (one for the pocket clip), an oversized pivot, and a removable carbide glassbreaker.

The HEAT is a comfortable knife. The handle is a good deal larger than the blade, which is a very practical way to design a smaller knife. I’d rather there be plenty of handle and a smaller blade than vice versa. The blade features an extended ricasso that helps form an integral guard, and the fingers rest naturally in the deep swooping finger choil. There is jimping on both the spine of the blade (very mild) and back of the handle (more aggressive, but still comfortable), and there is additional jimping towards the pommel for your ring and pinky finger. I used my HEAT for some fire prep. Now that things are starting to cool off a little in Florida, I tend to gravitate towards the back yard for fires and cigars. This knife is comfortable and you can get real work done with it.

DPx went with a deep carry pocket clip. Like the original HEST and many LionSteel folders, the clip is mounted on the absolute butt of the handle, and is configured for right side tip up carry only. I wish they would have allowed for ambidextrous carry. Being a lefty I always like to see ambidextrous clips, and think it could have been done without too much trouble with this style of clip. That said, the clip is precision machined into the handle, and the end result is seamless.

The clip has good retention and the knife buries deeply in the pocket. The HEAT carries well for a smaller, heavish knife. I quickly forget it is in my pocket until the time comes to use it. There is a small DPx skull logo on the clip, which won’t be to everyone’s taste, but is no different from virtually every other clip in my collection (they almost all have logos). I don’t mind it. All things considered the clip and knife is discrete; just the way I like things.

Deployment and Lockup

The HEAT gives you the option of ambidextrous thumb studs or bottle opener / wave feature to get the blade open. The thumb studs are simple and situated so that it is easy to get the blade open, and the blade rides on teflon washers. The action is smooth and the blade snaps open with a crisp and satisfying feeling. The wave works well if you want it to and carry the knife in your right pocket. I carry the knife in my left pocket, so I generally do not make use of the wave. That said, as part of the review process I waved the knife open dozens of times. It works as you would expect it to, with no ill effects on the lock (more below).

The blade of the HEAT is secured by a titanium frame lock. My lock engages early (around 40%). There is a slight amount of stick – not enough to make disengaging the lock obnoxious, but enough to make for a snug and secure lockup. I detected zero blade play in any direction after weeks of carry and use. Although I am generally not a big fan of wave openers, I made a point to wave this knife open regularly and the lock shows no ill effects. Blade centering on my knife is close to perfect.

DPx HEAT Review – Final Thoughts

The HEAT is probably my favorite knife in DPx’s catalog. I am a sucker for small high quality knives. The HEAT strikes a good balance between being a carryable cutting tool, and being overbuilt and aggressively styled. Although Robert Young Pelton and DPx Gear are a relative newcomers to the cutlery industry, his eye for design is undeniable, and the lines of the HEAT flow pleasantly whether the blade is open or closed. This is an interesting riff on the original HEST/F design, and is a step forward if you ask me. The bells and whistles of the original HEST/F have been stripped away to showcase a well designed knife that retains both personality and performance.

That said, the HEAT will not appeal to everyone. The overbuilt blade and full titanium handles come at a cost – the knife has some heft to it, and it will not slice like a slip joint. This is for someone that enjoys overbuilt folders, but doesn’t want to be bogged down with a 3″+ blade and 5 ounce+ footprint. I enjoy the HEAT/F for what it is. It has been well considered, and beautifully executed. The fit and finish is excellent and the materials are top notch.

If you like small overbuilt knives, the HEAT is well worth considering. I am curious to see how DPx Gear will continue to evolve their line of folding knives.

DPx Gear DPx HEAT/F,2.26 Folding Knife,Olive Drab,Left-hand DPHTF003

Folding Knives, Knives & Tools

If you want to buy a DPx Gear HEAT, I recommend purchasing it at Amazon or BladeHQ. Thanks for checking out the review.

Hinderer XM-18 3″ Review

by Dan Jackson 18 Comments

Last Updated: August 5, 2019
If you have been following Hinderer Knives on the secondary market, you will have noticed that the prices have fallen dramatically over the past couple years. A few years ago, it would have been hard to find a used XM-18 for less than $700. Some were fetching closer to a grand. Today, if you hunt around you can find them for close to retail ($385), and some online stores even carry Hinderer products. That’s right, you may actually have a shot at buying the knives from a retailer(!)

Buy the Hinderer XM-18 3″ at BladeHQ

Buy on Amazon

I am not sure why the prices of Hinderers have dropped. It may be due to increased manufacturing capabilities so that supply actually begins to meet demand. Or perhaps the company is facing pressure from the rise of mid techs and high end Chinese knives. Or maybe it has something to do with excellent Hinderer / ZT collabs like the 0562CF driving down demand?

This is great news, regardless of the cause of the price drop. Personally, the reduction in price has allowed me to carry and use my 3″ XM-18. Don’t get me wrong, I carried and used my 3.5, but after shelling out over $500 for it I was pretty ginger with the knife. Plus it was really too big for me to carry regularly. I eventually sold it off. Now that the prices have come down to earth, I picked up a 3″ version of XM-18 to try.

General Dimensions and Blade Details

The XM-18 3″ has an overall length of 7″, a 3″ blade, weighs 3.6 ounces, and is made in the USA. While the XM-18 3.5 is an impressive piece of hardware, it is hardly an every day carry (EDC) item in my book. It is built like a tank, with a thick slab of titanium, meaty blade, and over-sized stand offs. The 3.5 is a much more substantial knife than the 3. The 3″ version of the XM-18 is better for my minimalist style of daily carry. As a result this knife has been getting a ton of pocket time. I would consider this to be either an EDC knife, or a collectible.

Hinderer used to only offer the production XM in a drop point (with a spanto or “slicer” grind). Over the past year or two they have rolled out a number of different blade shapes including a clip point, “skinner”, and the wharncliffe version shown here. Rick’s wharncliffe design has grown on me. The shape is attractive and the blade has been executed flawlessly. The knife is ground thin and cuts well. The edge is about as neat of an edge as I have seen. The grinds are crisp and the stonewashed finish is subtle.

My XM came in S35VN stainless steel – just like the blade on my 3.5, the new Chris Reeve knives, and a number of other higher end offerings I have sampled. So at this point I am very familiar with S35VN as a blade steel, but I have still taken the time to put this knife through its paces.

This XM-18 has spent many weekends clipped to my pocket, and has broken down innumerable boxes, and assisted with home improvement tasks. I like the combination of S35VN steel and wharncliffe blade; this is like the worlds most expensive box cutter. The blade tracks easily through material, and the straight edge results in pressure being uniformly applied throughout the entire cut. The absence of belly means that this won’t be a great hunting or filet knife, but the straight edge is useful for a lot of other jobs. I have had zero issues with corrosion and have not much need to sharpen (although it certainly dulls after use – this isn’t some miracle steel). I have mostly maintained the edge on my strop and it continues to shave hair and push cut paper with regular maintenance. S35VN is excellent stuff, and you will find the 3″ XM in S35VN to be a capable cutter.

Handle, Ergonomics, and Pocket Clip

Handle construction of the XM-18 3, follows Rick’s pattern of titanium lock side, custom stainless steel standoffs, titanium liner and G10 handle scale. A slotted pivot helps hold it all together. Everything has been executed with surgical precision. The titanium on my model has been stonewashed and has held up well. The filler tab is flush with the handle. Every detail has been carefully considered and masterfully executed. What I especially enjoy about the 3″ version of this knife is how light the handle is. It is significantly lighter than the 3.5, and despite everything being over built the knife still tucks away neatly into the pocket.

The XM series includes one of my favorite ergonomic features: the forward finger choil. As demonstrated on some of my all time favorites like the Paramilitary 2, American Lawman, and Sage 1, this forward choil gives the user several options in gripping the knife. I find myself using the choil for detail work, and not using it when breaking down a box or engaged in an extended cutting chore. If you ignore the forward choil, the rest of the handle is plenty adequate for a full grip, and the simple shape naturally conforms to the hand. There is a run of jimping on the spine. The jimping is wide, and it strikes a good balance between providing traction and not shredding your thumb. The corrugated G10 handle scale and jimping by the pommel provides additional traction. This little XM is not going to fall out of your hand easily.

The 3″ XM features the same titanium pocket clip found on the rest of the XM line. It’s a spoon style clip that fits into a recess machined into the handle. This is not a deep carry clip, but when mounted for tip up carry the knife buries into the pocket decently. While it isn’t my all time favorite clip design, it certainly works. The clip has good retention and is reasonably discrete. The handle has been milled for right side tip up or tip down carry, and a “filler tab” is included to cover up the recess in the handle.

I like the way the 3″ XM carries. It feels even lighter than it’s 3.6 ounces would suggest, and the knife is as thin as my beloved Sage 1. For these reasons the 3″ has been getting a lot of pocket time, and it has proven itself to be a viable EDC option for me.

Deployment and Lockup

Hinderer sells the 3″ XM-18 in flipper and non-flipper variants. I have a flipper version, but it might as well be a non-flipper. The flipping action is pathetic. The blade barely makes it out to half mast – even when preloading the flipper. This is a shame. I still like the knife, but when you consider that a $30 Swindle flips better than this, it makes you wonder what is going on at Hinderer HQ. I have heard rumors that Hinderer was going to fix the weak detent on their new knives. I am not sure when this wharncliffe was made, but I don’t think they have been offering the blade shape for longer than a year. Thankfully, thumb studs are also included on the knife, and they can be used to “coin flip” the blade open. All XMs come with teflon washers, and my little 3″ is no different. The action is smooth, but personally I still prefer phosphor bronze (and suspect bronze washers would help the action).

The titanium framelock on this knife is extremely nice. It engages early and without stick. There is no blade play and the blade is perfectly centered. Hinderer has this part down to a science and it shows. This is an excellent framelock and it is certainly up for heavy cutting. Blade centering on my knife is perfect.

Hinderer XM-18 3″ Review – Final Thoughts

The high end titanium framelock flipper market has become fiercely competitive over the years, and shows zero sign of slowing down. Hinderer’s XM series has long been considered a gold standard for titanium framelock knives and high end carry pieces. If you get your hands on one it will not take long to understand why. The knives are beautifully made to exceptionally high tolerances.

Although the prices have dropped these are still far from cheap. Most people reading this probably think I am nuts to own a $400 knife, and that is OK. I’ll spare everyone the “value” discussion – either you want an XM (and are willing to pay for it) or you don’t. But at close to MSRP I think these are excellent knives, built extremely well, and I am surprised at how much I have enjoyed the 3″ XM. I bought it on a whim, and it has won me over. This is a great high end EDC option because it carries and cuts well, and oozes quality. I just wish the flipper actually flipped. That would be the cherry on top of this knife sundae. But as it stands there is still a lot to enjoy.

This is a rugged no-nonsense tool that will serve it owner well for many many years, and I think the 3″ version is practical for a normal guy to EDC if you can get around the price tag and sub-par flipping action. Recommended.

Rick Hinderer Knives XM-18 3″ – $425.00
From: BladeHQ

RICK HINDERER XM-18 3.0 SPANTO-WORKING FINISH

KnifeArt has a great selection of XM-18s, and occasionally they pop up on BladeHQ as well. And lately, they have been popping up on Amazon too. I recommend purchasing them at these retailers. Thank you for read.

Zero Tolerance 0808 Review

by Dan Jackson 9 Comments

Last Updated: August 3, 2019
Zero Tolerance has had some interesting releases in 2015. What especially intrigued me was their addition of a few smaller folders to the line up. The 0450, 0900 and 0808 all feature 3.25″ and smaller blades and come in under 5 ounces. This may not seem like much of an accomplishment, but considering the brand’s origins – monster folders like the 0300 and 0560 – these new offerings are much smaller and more pocket friendly.

Buy the Zero Tolerance 0808 at BladeHQ

Buy on Amazon

Of course there is still plenty room for monster truck knives in their roster. Designs like the 0999 assure us that ZT has no intentions of cutting short the freak show any time soon. But at least part their line up is trending towards smaller, more practical daily carry blades.

The 0808 was designed by renown custom knife maker Todd Rexford. Todd also designed the 0801, which was a successful knife, but seemed a little plain. The 0808 strikes me as a much bolder design.

When originally commenting on the knife on an episode of Gear Geeks Live, I said that it reminds me more of a surgical instrument than a pocket knife. I still feel that way. The spare design, shiny hardware, and monochromatic color scheme all lend a futuristic feel to the knife. It was one of ZTs more intriguing offerings for the year, and with 2016 fast approaching I felt like it was high time to examine the 808.

General Dimensions and Blade Details

The 0808 has an overall length of 7.625″, a 3.25″ blade, weighs 4.3 ounces, and is made in the USA. It is a good deal smaller than the 0801 and is noticeably lighter. Personally, I like that, and the knife is bound to appeal more to the urban Every Day Carry (EDC) crowd then some of ZT’s older offerings. Still, the knife has some heft to it, thanks to full titanium construction. This isn’t a gent’s folder or ultralight EDC.

The blade of the 0808 is what I would describe as a modified clip point, although I think you could also argue that it is a modified wharncliffe. Regardless, it’s an atypical and angular blade shape that seems more at home on the set of Aliens than it does in my pocket. It has a very fine tip and a high flat grind. There is a non-functional swedge that adds to the visual appeal of the knife and follows the line of the handle. The grinds are all “belt finished” satin while the flats are lightly stone washed.

Zero Tolerance selected S35VN for the blade, a USA made steel forged by Crucible. I have taken a shine to S35VN over the past couple years. I like it more than its predecessor, S30V, largely because I have found it easier to sharpen. S35VN displays all of the other characteristics I am looking for in a higher end steel, including decent edge retention and corrosion resistance.

The 0808 cuts well. The stock is thick for a smaller knife, but the flat grind gets thin behind the edge and the needle fine tip is excellent for detail work. I had no problem breaking down boxes, although the absence of belly made it less ideal for food prep. I have had no issues with rust or corrosion. The edge is easy to maintain and so far all I have needed to do to strop the knife and occasionally run it on the fine stones of my Spyderco Sharpmaker.

Handle, Ergonomics, and Pocket Clip

The handle of the 0808 features titanium handle slabs, and a chunky polished titanium backspacer. Everything is held together with stainless steel hardware. I like the clean look of the 808 and the details are (mostly) subtle. The faceted handle and high polished pivot and backspacer lend to the knife’s futuristic look. I could do without the engraved “Zero Tolerance” logo on the show side, but it isn’t too bad and I suppose they have to place their logo somewhere. The handle slabs have been stonewashed, which helps hide wear. The fit and finish is excellent.

The ergonomics of the knife are simple and comfortable. I am able to get a full grip without any issue. There are no finger choils and there is no jimping except for 5 grooves on the flipper tab. Some may bemoan the apparent lack of traction. Admittedly, I have not used this knife to skin a deer or engage in hand to hand combat, but I had no issues with the knife slipping out of control under normal use. I didn’t notice anything in the way of hot spots either. But if you are looking for a serious “traction plan” then you will need to either bust out the skateboard tape or mosey on to stickier pastures.

I do want to mention that the titanium backspacer is substantial, and the knife does feel slightly off balance. This isn’t a chopper or a fighting knife, and it was not a big deal for me, but it is worth noting.

The pocket clip of the 0808 is not my favorite aspect of the knife. It shares some interesting similarities to the Hinderer XM-18’s clip, but leaves a lot of the knife exposed when it is in your pocket. That said, the handle looks like it will accept ZT’s deep carry flip found on knives like the original 0560.

I am not necessarily a deep carry clip snob, but I don’t like having a 3/4″ of a knife poking out of my pocket either. Retention is OK, but because this is a smooth titanium handle, and because we have a relatively heavy knife, I also have some concerns about the 0808 falling out of the pocket when the clip is used with lighter fabrics. While the clip isn’t a death knell for the review, it is my biggest gripe with the knife.

Deployment and Lockup

For my money, Zero Tolerance makes some of the best flippers. This 0808 is no exception. The knife comes with a caged bearing system and a dialed in detent. The blade flies open without fail every time, and is extremely secure in the closed position. My bearings are incredibly smooth and the blade falls shut upon disengagement. It is worth noting, that in the past ZT has used a blue nylon cage for their bearings. This time there is a metal cage – perhaps to accommodate the smaller footprint of the 808.

The 808 is a titanium framelock with a stainless steel lockbar insert. ZT makes a lot of titanium framelocks with steel lockbar inserts, and lockup is on my knife is early and secure. No blade play and no stick. This is how a framelock should be. My blade is not perfectly centered, but it is close.

Zero Tolerance 0808 Review – Final Thoughts

Once again Zero Tolerance has managed to deliver the goods. This is a design from one of the hottest knifemakers in the industry right now, and Todd’s design has been executed brilliantly with top notch materials and superior fit and finish. The knife is also priced reasonably when you consider that you are getting a USA made folder with premium materials and all the bells and whistles.

I like that Zero Tolerance decided to embrace smaller knives in 2015. Yet the 0808 isn’t short on quality or detail, and this is probably my favorite knife from ZT for 2015. The pocket clip is my biggest gripe, and that can be fixed with an aftermarket clip (I have seen some on Ebay for around $30, as time goes on the prices on these will likely drop). Besides that, I find little to complain about when it comes to the 808. I will be curious to see if Zero Tolerance continues in the direction of these smaller blades.

All in all, if you are at all interested in the 0808 I can safely recommend it. At the time of writing this review Amazon is selling these for around $150. At that price the 0808 is unbeatable if you are looking for a titanium framelock flipper. Not sure if that is a pricing error or what, but it’s a heck of a deal.

Zero Tolerance Kershaw KVT Pocket Knife, 3.25” Stainless Steel Blade with Manual Opening and Flipper, Titanium Handle with Deep-Carry Pocketclip, Small Folding Knife

FOLDING POCKET KNIFE: Made in collaboration with Todd Rexford, the Kershaw Zero Tolerance Titanium pocket knife is the perfect everyday carry. KVT ball-bearing system offers smooth function.
STAINLESS STEEL 3.25" BLADE: Made from S35VN stainless steel, the Zero Tolerance blade takes a sharp edge and is easy to resharpen when needed. Blade resists chipping and provides excellent edge retention.
COMFORTABLE, ERGONOMIC HANDLE: Textured and contoured for a secure grip, the Zero Tolerance’s titanium, stonewashed finish handle is prepared for any cutting action.
MANUAL OPENING mechanism and convenient flipper offers quick and easy access with simple, one-handed opening. Frame lock secures the blade when not in use.
ATTRACTIVE, INDUSTRIAL DESIGN: Stonewashed and satin finish on the blade and stonewashed finish on the titanium handle presents a stylish look. This EDC pocket knife is sure to turn heads wherever you go.

I recommend purchasing the 0808 at Amazon or BladeHQ.

Fallkniven U2 Review

by Dan Jackson 6 Comments

They say less is more. That is, until, less becomes less. That is the question with the [U2, an ultra minimalist blade from Fallkniven. The U2 is about as simple of a knife as you could ask for. A slim, refined folding lockback with plain black handles, a gleaming laminated blade, and just enough hardware to hold it all together.

Buy the Fallkniven U2 at BladeHQ

Buy on Amazon

I’m no stranger to Fallkniven’s minimalist approach. I have found it works wonderfully in the context of a fixed blade and I have enjoyed their A1 and F1 tremendously. So the time has finally come to examine this little U2, which is arguably the brand’s most popular folding knife, and is marketed as the first folding knife with a Super Gold Powder Steel (SGPS) blade.

General Dimensions and Blade Details

The U2 has an overall length of 5.9″, a 2.52″ blade, weighs 1.5 ounces, and is made in Japan. This knife is made for Fallkniven by Moki. There really is not much to this knife. Oddly enough, when the U2 first arrived I was most surprised with how small the box was. It was not much more than a matchbox. Needless to say, but the U2 is extremely lightweight and eminently pocketable.

The blade of the U2 is a simple drop point with full flat grind. There is no swedge or distinguishing feature, save for the ambidextrous nail nicks, laser etched Fallkniven logo, and demarcation between the steels of this laminated blade. This is about as simple as it gets. The tip is capable enough for household chores and there is a slight belly to the blade.

Fallkniven selected a laminated blade with VG10 cladding, and a Super Gold Powder Steel (SGPS) core. I discussed this steel a little in my review of the F1, but this is my first experience with it. On paper SGPS is a very interesting steel. It is heat treated to 62 HRc, and is sold at a serious premium on the F1 series.

In practice my initial reaction to the cutting ability of the U2 was underwhelming. This is a thin and sharp blade out of the box. I expected laser like performance on cardboard, but my knife was hanging up on something when I tried to cut with it. Don’t get me wrong, it cut, but it wasn’t the silky smooth performance I was expecting from a knife like this. In performing a little research for the review I realized that I was not alone, and the knife benefited greatly from a re-profiling.

I’m no expert at re-profiling, but I first attempted to “relieve the edge” a little with the 30 degree feature of my Sharpmaker. That didn’t give me the result I was after, and I ended up running it on the diamond stones of DMT Aligner. Now the U2 responds a lot better to cardboard, paper, and other fine slicing tasks. The blade stock is very thin, and so is the grind, but for whatever reason I needed to spend some time tweaking the edge before I could realize the knife’s full potential.

I found edge retention to be merely “OK”. I’d say it was a step up over VG10 and AUS8, but not leaps and bounds ahead. When it came time to touch up the edge on the rods of my Sharpmaker, it came back without a ton of work. I would place this steel above VG10, but I would not put it on the same level as ZDP-189 (at least in terms of edge retention). I had zero issues with corrosion resistance.

Handle, Ergonomics, and Carry

The handle of the U2 is injection molded Zytel, a high density plastic resin. It is lightweight, strong, and functional. However, fans of more substantial knives (including those that dislike the “plasticy” feel of the handles on the Griptilian) will likely not be a fan of the U2’s handle. Personally, I don’t mind the plastic feel of the handles. I have owned a number of zytel handled knives in the past, and have never had a problem.

However, this is one aspect of the knife that is tough for me to describe, and I don’t think pictures do a great job conveying the feel of the handle either. I will say the handle is nicely finished. The edges (save the inside edges) are nicely chamfered. There is as generous lanyard hole, and the pivot screw and single rivet give the knife a clean appearance.

The handle of the U2 is just big enough for me to get a full 4 finger grip on. Any smaller and this would become a 3-finger knife. I take an XL glove, so this handle should work for most people. There is no jimping to speak of on this knife. Not a bad thing if you ask me. The inside edges of the handle are a little sharp, but I otherwise found the U2 to be comfortable. The handle itself has a light texture to it. This isn’t a high traction handle, but it’s fine for normal tasks.

The U2 doesn’t have a pocket clip. The nice thing about the plastic handle, is that I have absolutely no reservations in dropping this knife into my pocket with my keys, loose change, etc. It wears well and I have zero concerns of marring the finish. At 1.5 ounces it is like carrying an Alox Cadet. You don’t notice the knife until you need it.

Deployment and Lockup

The U2 is equipped with dual nail nicks. These are generous nicks and they make it easy to open the knife. It is possible to open the knife one handed with a little finger gymnastics, but this was designed to be a 2 hand opener. At any rate, I have no issue with the nail nicks, but I did have an issue with the gritty and noisy pivot. I thought that was strange. I couldn’t see if there were washers inside the handle, so I ended up disassembling the knife and found that there were no washers. It’s metal on plastic.

I don’t need each knife in my drawer to be “Sebenza Smooth” but even my $20 Swiss army knife is smoother than the U2. For me that is a bummer and is one of my least favorite aspects of the knife. Bronze or even teflon washers would be welcome here like WD-40 on the hinge of a squeaky door.

For lockup we have a tried and true lockback mechanism here. The lock on the U2 is sturdy, although this isn’t a knife that I am going to start prying with. The blade snaps crisply in place, is free of play, and disengages with a press of the thumb. The lockback is perfectly fine for this kind of knife. I will say that the tang of the blade and the backspring of the lock do not have a particularly good transition. There is a noticeable “jump” between the 2 pieces of metal. Not a big deal for a user knife, but this is something I usually notice on a slip joint or lockback folder.

My blade is just a touch off center. Nothing rubs.

Fallkniven U2 Review – Final Thoughts

Frankly I am a little torn with the U2. Having had good results with Fallkniven’s fixed blade knives I was excited about finally acquiring the U2. It has generally received good feedback from Amazon and several other reviewers I respect, and I have been enjoying traditional knives and gentleman’s folders. So I thought I would really take to this one.

While I appreciate the practicality of it, I was disappointed by some aspects of the finish work of the knife. The edge required a good amount of tweaking to cut the way I wanted it to, I wasn’t blown away by the Super Gold Powder Steel, and the pivot and action of the knife is gritty thanks to the washer-less design.

On the plus side, it’s lightweight, pocketable, and cuts well once you get it profiled correctly. I think that it can be good as an urban carry or back up piece. So it really depends on what you care about. If you trend towards being anal retentive, then there are quirks with the U2 that may make it a deal breaker. If you are looking for an ultra-light, no-frills, EDC knife without a pocket clip, then it could be the perfect tool.

For my money, I would recommend either the Spyderco Dragonfly, Pingo or the Victorinox Cadet before the U2. I honestly like them more than this knife, and they are all significantly less expensive.

3D Peep Sight Fallkniven U2 Gemini Folding Knife

Closed length: 3.85 inches
Blade length: 2.52 inches
Blade material: lam.Sgps
Blade edge: plain
Point: drop point

With that said, if you are in the market to buy a U2, I recommend purchasing it at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Southard Knives Tolk Review

by Dan Jackson 5 Comments

Midtechs. If there was a single thread that bound Blade Show 2015 together for me, that thread would be midtechs. Specifically, midtechs offered directly from custom knife makers.

Midtechs are nothing new, and have been in the knife enthusiast’s vernacular for several years now, although it is admittedly a fuzzy term to define. But at the 2015 show it seemed like any custom maker worth his salt had a mid tech offering of some sort, and whenever I gathered with fellow show-goers it seemed like everyone had acquired at least one midtech at the show.

I don’t think this is a bad thing. I think this is an attempt to resolve an interesting problem in the market. Custom “tactical folding knives” are as hot as they ever were, and still show no sign of slacking off. While the concept of production company collaborations with custom knifemakers is nothing new, it seems like the bulk of the profits go to the manufacturer, and depending on the collaboration the knifemaker’s design is limited by the budget for the production knife. In some cases the result can be spectacular, but the flip side is that the product might be a watered down design with sloppy fit and finish, and inferior materials.

The advantages of producing a direct to consumer midtech is that the knife is more accessible than a full custom, allows the knifemaker to exercise greater control over materials and production quality, and builds in a bigger margin for the maker by virtue of the offering being higher end and the lack of middlemen. In a typical collaboration model with a big brand the production company takes a cut, the manufacturer takes a cut, a wholesaler takes a cut, then a retailer takes a cut. There isn’t much meat on the bone left for the designer.

But now it is possible for a custom knifemaker to essentially private label high end production knives, and offer them directly to the consumer. 10 years ago the technology wasn’t there to make this a viable business model. Today, the midtech model clearly has legs, and you don’t need a crystal ball to predict we will only see more of these hit the market – especially as custom makers take their designs overseas and offer there wares at lower and lower price points.

I was not immune to the powerful draw of the midtech phenomena, and ended up walking off the show floor with this Southard Knives Tolk midtech. Let me start by saying that Brad is a hell of a guy, and was a pleasure to meet and deal with. His custom offerings are among the most popular at the show, and between that and his tremendously successful collaboration with Spyderco might make a lesser man aloof. Not the case with Brad. He was warm, approachable, and it was clear he was proud of this midtech offering. I am happy to offer up this review today.

General Dimensions and Blade Details

The Southard Tolk has an overall length of 8.75″, a 3.87″ blade, weighs 4.7 ounces, and is made in the USA. This is the second midtech offering from Brad, the first being the Avo. He is dubbing his midtech line the Performance Series. The Tolk is a big knife with it’s near 4″ blade. Definitely a bit outside of what I usually gravitate towards, but given the length of the knife I will say it is lightweight and manageable. This could be an every day carry (EDC) piece for some folks. For me it’s a collectible.

The hump backed blade of the Tolk is reminiscent of the Spyderco Southard Flipper, and has been given a high flat grind and a bright satin finish. Brad also offers the Tolk with stonewashed flats if you care for a little more contrast. Blade thickness is about 3.5mm, which is generous for a thin profiled folder. There is a decent amount of steel traveling out to the tip, and the blade is thinly ground. There isn’t much belly and I find that the Tolk is well suited to slicing.

Southard went with CTS-XHP stainless steel for the blade. This is a proven steel in my book and I am happy to see it on this premium offering. I must confess that my Tolk has not seen a ton of pocket time (or cutting time). It has held up well under the light use I have put it through.

Handle, Ergonomics, and Pocket Clip

The Tolk has a full bead blasted titanium handle. Subtle grooves have been milled into the face of the handle while deep lightening pockets have been milled on the inside. The hardware on this piece is especially interesting, with the show side featuring a decorative pivot and decorative hardware. The non-show side has a high domed pivot and oversize body fasteners. Rounding things out are blue anodized titanium standoffs. They compliment the lockbar stabilizer and thumb studs nicely. Fit and finish is everything I would expect from a high end custom knifemaker like Brad. The knife is highly refined.

I like the way the Tolk feels in hand. This is a generous knife and my fingers had no problem spreading out over the curves on the handle. Like a Cadillac sedan, there is room to spare, and the chamferred edges sink into your palm like a velour seat. The spine jimping stands in sharp contrast – literally – to the rest of the handle. It is aggressive and toothy. It is not as bad as the jimping on the SnG, but under sustained use it will irritate the skin. The jimping on the butt of the blade is even more aggressive, but since I rarely if ever use my knives in reverse grip I view it as decoration more than anything.

The pocket clip is relatively pedestrian compared to the rest of the knife. It is a simple bent titanium clip, and it integrates nicely with the handle. It is drilled and tapped for right side tip up carry only, and there is a recess milled into the handle like an XM-18 or Large Sebenza. The clip of the Tolk has good retention and is set up for relatively deep carry. It carries well in the pocket and is thin and manageable given its length.

Deployment and Lockup

The Tolk is equipped with both a flipper and ambidextrous thumb studs. The thumb studs are set close to the handle and I am unable to use them to flick the knife open. It is a good option for slowly rolling the blade open, but most people will be gravitating towards the flipper. And the flipper is definitely a good choice. The ceramic ball detent is dialed in and the blade pops open with a satisfying snap. The pivot is on bearings and the action is smooth.

For lockup, we have a titanum framelock. Like the Odino, the last framelock knife I reviewed, the Tolk bucks the trend of stainless steel lockbar inserts. I don’t have a problem with this provided that the titanium framelock works well, and I am pleased to report that is the case here. Lockup is early and solid. There is no blade play or lock stick to speak of. This is a titanium framelock done right. Rounding things out is a blue anodized titanium lockbar stabilizer. Blade centering is perfect.

Southard Tolk – Final Thoughts

The Tolk is basically everything I would expect from a high end midtech offering: top flight materials, exceptional fit and finish, and hand tuned details. The Tolk has all these qualities in spades. The packing is also worth noting. The knife comes in a foam lined embossed box and includes a certificate of authenticity signed by the man himself. This has been a fun knife to own and it is obvious that a lot of thought and care went into every detail of the experience.

Some scoff at the notion that this is “as close as you can come to buying a custom offering.” I think that subject should be explored on a case by case basis. The Tolk is obviously not a custom knife, but I think that in this case Brad has put a lot of time and thought into these. He and has apparently even created some of the parts (like the pivots). He was selling them personally, including each with a signed card of authenticity, and he was proud to do it. While this obviously isn’t a custom offering, in this case I believe it is a couple steps closer than a collaboration with a production knife company.

When I turn back to the practicality of the Tolk, the knife is a bit large and expensive to be a true daily carry for me, but I had a fun time meeting Brad at the show and walking away with something he had a hand in. Perhaps one day I will trade it in for something a little smaller, maybe even put the money towards a custom piece. Until then, this will be the closest I have come to owning a Brad Southard custom knife.

The Tolk is currently unavailable. If it were available I’d recommend purchasing it at BladeHQ or Amazon. I’d follow along on Brad’s website and perhaps he will release more models there. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.