s30v

Benchmade Mini Boost Review

As a rule of thumb, most knife nerds steer clear of blades with assisted openers. They’re regarded as obnoxious, tough to maintain, and not as prestigious as something with a truly dialed in detent. But can you guess which type of folks tend to prefer assisted openers? In my experience, the answer is simple – Those who actually use their knife as an everyday tool.

Buy the Benchmade Mini Bost at BladeHQ

Buy on Amazon

This brings me to the Benchmade Mini Boost. I know about AXIS Locks, but I’d never handled an assisted one. So, when the company offered to send one over for review, I leapt at the opportunity. Here’s my review of the Mini Boost, a blade which just might change the way you think about spring-fired knives.

General Dimensions and Blade Details

As its name would indicate, this is the compact version of Benchmade’s USA-made Boost design. It sheds nearly an inch and a half of its predecessor’s length, now reaching a modest 7.18-inches open. Blade span has been reduced from 3.7-inches to 3.11, while slimming the stock from 0.12-inches to a demure 0.10. The CMP-S30V steel remains the same, as does its drop point, flat ground nature. Last is the weight, plunging from 4.59-ounces to 3.31.

Enough numbers. Let’s flick the thumb stud, fire the AXIS Assist, and get to business.

As you can see from the cutting board photos, the Boost’s thin blade is an excellent slicer. Despite its American roots, the knife proved invaluable in the preparation of homemade General Tso’s Chicken. I had no trouble producing finely chopped pieces of ginger, garlic, and green onion. It proved equally capable in other daily chores, breezing through bags of dogfood and those annoying boxes for the toner cartridges at work.

This does bring up something of a sore spot. When you use things, they tend to get dirty. I like to maintain my tools, which usually involves some form of disassembly and cleaning. The Mini Boost, however, will get no such treatment from me. AXIS locks are fiddly to take down in the first place, but add in what I assume is some form of torsion bar or coil setup and, man, I don’t need that kind of frustration in my life. The bronze washers are easily accessible, and a periodic application of oil may be all you need to keep it firing reliably.

Speaking of reliability, I must have picked a good time to start reviewing Benchmades. While I’ve heard and read many complaints about their production and quality control, each of the three blades I’ve handled had zero problems. Maybe they’re closely monitoring the reviews samples, but I have nothing negative to report.

Handle, Ergonomics, and Pocket Clip

First impressions count for a lot, but they can also be deceiving. Take the Mini Boost’s width, for instance. My immediate in-hand reaction was, “Wow, this thing is thick.” And it is: 0.63-inches from a statistical standpoint. But take a look at this side-by-side comparison with the Spyderco Native 5.

See that? The spines are pretty much identical, though the Boost’s sides swell out a bit further. In the pocket, this width is surprisingly comfortable. Part of this is due to its excellent deep-carry clip. The knife rides low in the back of my pocket, where its girth actually puffs out the seam and makes the rest of my tools more accessible. I prefer thinner knives, sure, but this slightly wide feel also helps with grip. The polymer scales are a perfect pairing, though they can accumulate a bit of pocket grit. Still, I consider this to be an acceptable hazard for a work-first blade.

Let’s revisit the assist. Because of its sensitive thumb-stud deployment, Benchmade has included a safety switch above the AXIS Lock. This sends a piece of metal sliding into the mechanism, preventing the knife from accidentally deploying in your pocket. While I applaud their prudence in including this safety measure, it does cut down on some of the quick-fire appeal of an assisted blade. It leaves me wondering if assists and AXIS Locks are really meant to go together. It works, but the process definitely takes some getting used to. And while you certainly can carry it with the safety retracted, I was never quite comfortable with the idea of a loaded blade in my pocket.

That being said, management of the AXIS Assist quickly becomes second nature. I carried this blade for nearly a month before completing the review, during which time I grew to appreciate both its deployment quirks and slicing prowess. One-handed closing is tricky, sure. But I kept fidgeting with it, over and over, just for the satisfying SNAKT noise of the blade leaping into place. For all its added complication over something like the Kershaw SpeedSafe, this assist is much more fun.

Benchmade Mini Boost Review – Final Thoughts

Let’s close with a thought experiment. Imagine you’re working a manual labor job in a dusty, grimy environment. Would you prefer a slick-firing folder running on ball bearings or an easy-opening blade sandwiched between phosphor bronze washers? For me, the answer is simple – Assist all the way. Because, sweet as that bearing action may be, it’s only a matter of time before job site gunk finds its way into the action. The solid washers and spring will run faster, longer, and more reliably in most hard-use situations.

As such, I consider the Mini Boost to be a solid argument for the existence of assisted knives. This, along with the Zero Tolerance 0566, is a solid example of spring-fired excellence. Yes, it’s trickier to maintain. But when it comes to down and dirty work, most of the calloused-handed folks I know prefer a blade with fast-deploy capability. I can’t tell you how many Kershaw Leeks and Ozark Trail folders I’ve seen peaking above the pockets of coveralls and dusty jeans.

In the end, the Boost proved to be a perfectly acceptable single-solution knife. It carries easily, cuts like crazy, and holds a decent edge. I’m still perplexed by the sudden resurgence of S30V, and I’d certainly prefer a better steel at this price point. But aside from the S30 and its pudgy width, there’s not a lot to dislike here. While I still prefer the mechanical precision of a dialed in detent, I’m also not the sort of hard user who cuts through boxes and bags all day. If that’s you, then consider checking out the Benchmade Mini Boost.

ESEE Knives Black CANDIRU Fixed Blade Knife w/Polymer Sheath

I recommend purchasing the Benchmade Mini Boost at Amazon or BladeHQ.

Benchmade Proper 319 Review

by Aaron Shapiro 1 Comment

Two or three years ago if you told me that Benchmade was your favorite knife company I’d roll my eyes and mutter something like, “Okay Griptillian dude…” now, that’s no disrespect to the Grip, those are great knives at a great price point, but they’re kinda vanilla for my tastes. That was Benchmade a few years ago.

Buy the Benchmade Proper at BladeHQ

No products found.

I’m not sure what happened over at Benchmade HQ but man are they putting out some absolute HEATERS in the last year or so. Starting with the Benchmade Proper slip joint (reviewed here) to the Benchmade Bugout and the full titanium integral Anthem 781.

Now, the slip joint thing is kinda interesting. Over the 2-3 year period, slip joints have begun to increase in popularity with the “tactical knife” folks. With the growth in popularity, it only makes sense that companies like Benchmade and Spyderco with the Roadie would begin to investigate the slip joint market.

Slipjoints are a very traditional style of knife designed so that a steel spring runs down the spine of the knife, the tension of that spring on the tang of the blade holds the knife open or closed. This design has been around for hundreds and hundreds of years so they’re really nothing new but I do believe that they are seeing a more widespread adoption in the last few years.

General Dimensions and Blade Details

Let’s get some specs before the review:

Blade Length: 2.75” (by my reckoning, BM puts it at 2.86”)
Overall Length: 6.625” (again by my ruler, BM states 6.69”)
Weight: 2.4oz (BM states 2.32oz)
Steel: CPM-S30V
Country of Manufacture: USA

Like most traditional folders, the Proper is an EDC knife through and through.

The Proper is available in two different blade shapes a sheep’s foot/wharncliffe type deal, and a clip point. At the risk of over simplifying the matter, I think that the clip point probably looks the best whereas the sheep’s foot is the most functional. I haven’t handled the clip personally, so take that with a grain of salt.

The sheep’s foot is exceptionally useful though, and is ideal for draw cuts when breaking down boxes, or slicing food. The blade stock is .09 thick steel and tapers to a nice .026 behind the edge. If you want to make it REAL crazy you can see if you can get a reground Krein version that is a literal lightsaber.

So how about the steel? S30V is a tried and true workhorse. Developed by Crucible with the help of legendary knife maker Chris Reeve, intended to hold a fine sharp edge for a long time, as well as having a very healthy amount of chromium making it extremely rust resistant.

In my experience, I find S30V to be a little chippy (in fact my Proper has a little chip out of the edge). Sharpening it is easy enough, and the edge does last a long time, to some extent S30V has become a little ho-hum in the realm of super steels. It’s still a performer though, and I do recommend it.

Handle and Ergonomics

The Proper, at the time of this review, is available in two handle materials. The first being red G10, and the second being the (more popular) green micarta. In terms of material I think they are equal, both G10 and micarta will stand up to a lot of wear and tear. They both offer a decent amount of grip traction for your hand in normal EDC use (what you’d use a slip joint for, no skinning wild boars or Hollywood-style knife fights).

The shape of the handle provides a great grip as well, with two very slight depending angles or you might call them quasi-choils on either end of the handle lock my pointer, middle, and ring fingers in place. The knife also has a bit of a badonkadonk, with a larger handle that extends past the downward angle of the choil, giving you an even more secure grip on the knife itself. That some extension also houses the lanyard hole.

I think all-in-all the knife is well designed for its intended use. This is not going to be a knife that you’re going to put through serious/hard work. A folding, non-locking, knife like this you’re going to perform pretty lightweight tasks.

Walk and Talk

So, the knife does not technically lock. It’s held in its various positions by the tension of the backspring. That being said, the Proper has a softer action than I’ve felt on other slip joints. Customs that I have had, or even GEC’s have very positive “walk and talks,” or the feeling and sound of the knife moving into its different positions.

I would prefer a positive action on the knife throughout, but when opened it doesn’t feel insecure.

Benchmade Proper Review – Final Thoughts

All things said and done, I think that the Benchmade Proper offers a lot to be had in terms of a modern/non-traditional slip joint. More interesting than that, however, I think seeing knives like this, the Spyderco Roadie, and even the Hinderer XM18 slippy hitting the marketplace shows an interesting trend when it comes to how people are choosing to spend their money.

If you had told me two years ago that I’d see a Hinderer slip joint or that Benchmade was making their own version of a non-locking folder I would have thought you were nuts, but here we are. I think the value is there, you’re going to spend nearly the same for a new Great Eastern Cutlery slippy, but you’re getting a modern design with a modern blade steel, versus GEC’s tried and true 1095.

If you’re not a slip joint guy, I think the Benchmade Proper is a great place to start. And if you’re already “in the fold,” then maybe it’s a good way to diversify your collection.

Sale

COLD STEEL AD-10 3.5" S35VN Steel Ultra-Sharp Drop Point Blade 5.25" G-10 Handle Tactical Folding Knife with Tri-Ad Locking Mechanism

CONSTRUCTION - The AD-10 tactical folding knife features an ultra-wide, ground thin at the edge, honed to razor-sharpness blade that offers unprecedented cutting, shearing, and piercing power while resisting bending, breaking, or chipping
S35VN STEEL BLADE - Crafted from S35VN steel, the AD-10 folding knife's blade ensures super-fine cutting edges and exceptional edge retention; This premium steel is renowned for its durability and ability to maintain sharpness through rigorous use
STRONG HANDLE - The handle of the AD-10 knife boasts heat-treated, full-length aluminum liners and 3D machined G-10 scales, providing unparalleled strength and grip; Its precise contouring and integral finger guard ensure a snug and secure fit in the hand
TRI-AD LOCK - Complete with the Tri-Ad, the AD-10 offers unrivaled strength, shock resistance, and durability; This reliable locking mechanism provides peace of mind, safeguarding your fingers during use and ensuring the blade remains securely in place
SPECS - Weight: 7 oz (198.4 g); Blade Thickness: 3.8 mm; Blade Length: 3 1/2"; Blade Steel: S35VN; Handle Length/Material: 5 1/4" G-10; Overall Length: 8 3/4"; Knife Type: Folder; Blade Shape: Drop Point; Locking Mechanism: Tri-Ad Lock

Editor: I recommend purchasing the Benchmade Proper at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Paramilitary 2 Left Handed C81GLE2 Review

by Aaron Shapiro 3 Comments

Last Updated: August 7, 2019
In 2009 my house was broken into while I was living in West Nashville. This caused me to do two things in quick succession. First, I adopted a huge Irish Wolfhound mix named “Apple,” and secondly, I bought a handgun. Now, since I tend to dive headfirst into anything that I get myself into… I began to research handguns, and that inexorably led me to the EDC community.

Buy the Left Handed Para 2 at BladeHQ

Buy on Amazon

I think that everyone has a story about their relationship to carrying a pocket knife. Mine is wrapped up in EDC videos on YouTube, and hours spent scouring BladeForums threads. One of the knives that struck a chord for me, and has endured since the very first years of my collecting, has been the Spyderco Paramilitary 2.

Now, my handedness (being left handed) has limited me in several areas when it comes to knives, and it ultimately forced me into buying primarily custom knives that I could have made for me. Whenever I see a company offer a production knife in, specifically, a lefty configuration I always try to buy at least one to support that effort they went to. The Left Handed version of the PM2 (model number C81GPLE2) was a no brainer for me. After all, this is arguably Spyderco‘s most popular knife.

Editors note: It is worth noting that the only difference between this left handed version of the Para 2 and the original PM2 is that the locking liner side and non locking liner side have been swapped. This lefty version is literally a mirrored version of the original Paramilitary 2. I can’t help but think of my days studying biology when I consider the Lefty Para 2. It’s the same concept of chirality that they teach in the introductory organic chemistry course.

General Dimensions and Blade Details

The Paramilitary 2 Left Handed has an overall length of 8.3″, a 3.4″ blade, weighs 3.75 ounces. Just like the original Paramilitary 2, this left hand version is made in the U.S.A. out of Spyderco’s Golden, Colorado factory.

The thing that DOES stick out about the PM2 blade, and is worth talking about, is how universally great it is. The leaf blade shape that Spyderco has championed for years is one of the more useful blade shapes out there. This, paired with their full flat grind on S30V steel gives you a strong but surgical tip for delicate operations, and long sweeping primary cutting edge. Now, I’ve used this blade for a LOT; opening packages, slicing apples, I even chopped up a cream filled cronut the other day. The Paramilitary 2 is a versatile and capable blade that will carry out day to day tasks, from the campsite to the kitchen without hesitation.

As a footnote, I’m not gonna go in depth about S30V. It’s a knife-specific allow that was developed by Chris Reeve and Crucible for folding pocket knives. At this point, we should all be at least a little familiar with it, it performs well, it’s very stainless, and it’s at least reasonable to sharpen. They make PM2’s in a variety of steels these days, but not the left handed version… and I’m not a steel snob, pretty much anything from VG10 nicer is okay for me, as subjective as that might be.

Handle, Ergonomics, and Pocket Clip

The Paramilitary 2, true to it’s name, was designed for LEO and Military use. Now… in reality that most likely means that it’s 99% bought and used by people like you and I, and 1% make it into the gloved hands of actual military users. But it’s intended purpose did inform some of it’s design decisions. The handle is slightly oversized with a pronounced shape to seat and lock your hand in place. There’s an alternate grip position with the knife open and your index finger inside the front choil that would allow you to “choke-up” on the knife for finer control. The handle slabs are peel ply black G10. That is very grippy. It’s not shred-your-jeans-grippy, but grippy all the same. Last big detail that is instantly apparent when you hold the knife is the thumb ramp. It’s steep, and it’s jimped. This serves as just another step in locking the knife into your grip when you hold it.

The pocket clip is one of Spyderco’s typical “spoon” pocket clips. Not a lot to say here except that they are functional and nicely designed. Tension is perfect and the knife carries well. There are a few other people that make deep carry clips for the PM2, so if you wanted another option you could find that there.

Deployment and Locking Mechanism

In keeping with the Spyderco trend, the PM2 utilizes a “spydie-hole” opening method. This is a distinguishing feature of the Spyderco line of knives. This is basically a .5” diameter hole in the blade that serves as the opening method. It’s something that Spyderco has been doing for a long time, a lot of you are likely familiar with it so I won’t belabor that particular point.

The PM2 utilizes Spyderco’s patented compression lock. For a long time I thought of this as sort of a “reverse liner-lock,”— that it just had the release on the back of the knife instead of on the bottom like a normal liner lock. Operationally and aesthetically this is true. However, in terms of use and strength that’s a bit of a misconception. The compression lock snaps into place between the blade tang and the stop pin. This “traps” the blade between those two forces. It’s not a matter of lockup “geometry” as much as it is two lateral forces holding the knife open. To use the compression lock, it DOES work like a reverse liner lock, you just have to push the liner the opposite direction of the spring and the blade will swing free.

Spyderco Paramilitary 2 Left Handed Review – Final Thoughts

Well… the Paramilitary 2 is my go to knife when people ask for a recommendation for what knife they should buy. I love the size, I love the grind, and I love the steel. Priced around ~$100 it packs a TON of pound per pound capability. The blade will preform equally well in the kitchen as it would on a construction site. The handles are comfortable to hold, and will stay grippy in almost any conditions. Lastly, the lock is one of the most solid out there, easy to disengage, and simple to operate.

Before I completely button up this review, I think I need to address the backwards elephant in the room. Spyderco released one of the most successful models in a left handed version, and it occurred to me (and my editor Dan), that I should touch on that fact. I think the best way to describe this would be the following: My experience with the Lefty PM2 is likely exactly the same as the right-handed world’s experience with the original PM2. Now, this is worth spending some time considering, the PM2 has a 4-way placeable clip, so most southpaws carried it lefty and just operated the lock the best that we could. The compression lock when operated with the opposite hand that it was designed for is awkward, incredibly, and can be borderline dangerous. Spyderco fixed that problem for us. As I stated earlier, whenever a company released a left-hand specific I typically buy it to support that gesture. This is a great example of that.

Sale

Spyderco Para Military 2 Signature Left-Handed Knife with 3.42" CPM S30V Steel Blade and Durable G-10 Handle - PlainEdge - C81GPLE2

An Improved Classic: Undeniably one of Spyderco's most popular and in-demand designs, the Para Military 2 distills the world-class performance of our legendary Military Model into a more compact, Pocket-Friendly package.
Superior Quality: We kept the same high-performance full flat-ground blade but we've also lengthened the blade's tip and added additional surface jimping to both the spine and finger coil.
A Secure Grip: The G-10 handle is narrowed at the end improving the Ergonomics. The handle and blade have been profile thinner; removing uncomfortable angles when in the closed position.
Easy-to-Use: The Para Military 2 features extreme strength, reliability, and ease of use of our patented Compression Lock mechanism and versatility of a 4-position pocket clip.
Dependable: Refinements to overall construction may not be drastic but from the G-10 textured handle to the steel full flat blade, everything is sharper, smoother and guaranteed to provide performance and user comfort.

I recommend purchasing the Paramilitary 2 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews, and keep this review train running. As always, any and all support is greatly appreciated.

Benchmade 560 Freek Review

by Dan Jackson 11 Comments

Last Updated: July 15, 2019

As much as I enjoy picking up the latest “gee whiz” must have knife of the moment, I get the most satisfaction in sharing a great knife that may have flown under the radar. This particular knife has flown so far under the radar, I would not have even heard about it if reader Darren hadn’t gone out of his way to send me a couple emails about the knife and how much he enjoyed it. Thank you, Darren.

Buy the Benchmade Freek at BladeHQ

Buy on Amazon

Enter the Benchmade 560 Freek. Like our friend the Bruised Forehead, the Freek didn’t win the knife name lottery. It also doesn’t benefit from being designed by a high profile knifemaker. And I don’t recall much in the way of fanfare from Benchmade or the knife collector community when the Freek arrived on the scene. It was quietly released. Rather than being a subject of media attention, the Freek has slowly earned a reputation for being a practical tool from those who have given this unassuming knife a chance.

I liken the Freek to the Benchmade Volli, another no-frills knife that didn’t get much attention, but may be be one of the best all-round EDC knives that Benchmade has released in the past 5 years. The Freek is cut from the same cloth. It’s another function over form design that is worth consideration if you are in the marketing for a largish EDC knife.

General Dimensions and Blade Details

The Freek has an overall length of 8.46″, a 3.6″ blade, and it weighs 3.72 ounces. This knife is made in America. As I mentioned earlier, I’d classify the 560 Freek as a large EDC knife. It could possibly be used as a hunting knife, as it has a good belly and shares the blade profile of their Saddle Mountain Skinner. Of course a knife of this size could also be used as a duty knife for a police officer, or perhaps pressed in to other self defense type applications. This is a versatile knife.

The drop point blade is distinguished by a curving thumb ramp and high flat grind. The blade is 2.9mm thick, and gets thin behind the edge thanks in part to that high flat grind. The edge has been neatly applied, and like on pretty much all the Benchmades I’ve owned over the years there, is a sharpening choil allowing you to sharpen the edge all the way down to the heel. The tip is fine, but the the deep belly keeps it out of the way. Again, this lends me to believe this could be a decent hunting knife, although frankly I’ve never been on a hunt in my life.

Benchmade has gone with tried and true S30V steel for the Freek. Although S30V has fallen slightly out of favor thanks to the widespread adoption of it’s more exotic cousin S35VN, I find that Benchmade does a particularly good job with their S30V. Case in point my Volli with its 2.5mm thick blade cuts like almost nothing else I own. That thing is a laser. The Freek is right up there. This knife is a phenomenal slicer, the S30V blade holds an excellent edge, and I found it to be an easy edge to maintain with strops and the ceramic rods from my Spyderco Sharpmaker.

This knife makes quick work of cardboard, laughs in the face of of your lunchtime apple, and will capably assist you with all those odd cutting tasks that crop up in our daily lives. Much like the Volli, the Freek is a knife that I looked forward to busting out when it came time to break down a box or open a package. It’s a performer and the S30V blade steel punches above its weight thanks to the heat treat and grind.

Handle, Ergonomics, and Pocket Clip

The handle is where things get interesting, and also where the knife is bound to alienate a significant section of the audience. Like the Griptilian, this is a plastic handled knife with partial stainless steel liners. Unlike the Griptilian, the Freek has a unique high density rubber (“Versaflex”) overmold that is bonded to the plastic. The end result is a lightweight grippy design that is unlike anything else in my collection.

Some will love the lightweight nature of the design and the non-slip feel to the handle. Others will dismiss it as being cheap and plasticy. If you couldn’t stand the feel of the handles of the original Griptilian, then my guess is you will want to skip the Freek. But if you don’t mind trading G10 for a large ultra light knife, then the Freek could be a winner for you.

The ergonomics of the Freek benefit from a streamlined handle design. There are few curves, and little reliance on jimping except for the thumb ramp. Although the handle is textured, it’s not an abrasive knife in the hand. The end result is a no-frills handle that is comfortable and secure in all kinds of conditions. The Freek easily accommodates my larger hand, and the handle is well suited for extended use and hard tasks.

This knife comes from the factory with Benchmade’s split arrow clip. I’ve long been a fan of this clip, and here it is situated for ambidextrous tip-up only carry. This is a discrete knife that and buries deeply in the pocket. Benchmade left part of the FRN endoskeleton exposed where the pocket clip meets the handle, and that makes for easy insertion and extraction of the knife from your pocket.

At well under 4 ounces I found the Freek to be an easy knife to tote around. It’s about as thick as the Griptilian and carries comparably. On that note, it’s worth stating that the Freek is actually almost half an inch longer than the Griptilian but weighs .16 ounces less.

Deployment and Lockup

There isn’t a whole heck of a lot new here to say in this section. This is a thumb stud axis lock knife. A tried and true design. Here the thumb studs and phosphor bronze washers work just as great as they did on my original Griptilian. While bearings are all the rage, I think something needs to be said for bronze washers. Especially for a thumb stud equipped user knife like the Freek. Bronze washers are still exceptionally smooth and are ideal for working knives like this.

I continue to appreciate the axis lock for it’s simple and intuitive design. Plus I always appreciate that this is a fully ambidextrous knife. Lockup is secure, but as you would expect from a plastic handled partial liner axis lock knife, there is a little side to side blade play. Nothing to get upset about, just a trade off in the design. Personally, I’m happy to exchange a modicum of side to side blade play for all the practicality and utility that this design offers. Your mileage may vary.

Blade centering is pretty good. It slightly favors the pocket clip side of my knife, and is far from rubbing.

Benchmade 560 Freek Review – Final Thoughts

For those wanting a premium lightweight work knife with an over 3.5″ blade, I think the Freek is a no-brainer. Benchmade has been refining this type of knife for years. It’s like a Griptilian but it is leaner and meaner, yet also slightly larger. Perhaps it’s oriented slightly more towards the lightweight camping and hunting ground. Benchmade doesn’t offer much insight in their product descriptions, but for some reason I keep going back to hunting when I consider the Freek.

Those that can’t stand the plastic scales on the original Griptilian would be well served to steer clear of the Freek. Instead check out the Volli or the G-10 Griptilian. Those models will also provide you with great cutting performance and ergonomics, but will also be a little stouter than the Freek.

I am glad Darren called this model to my attention. I hope in writing this review I have turned at least a couple people on to an excellent “sleeper” knife from Benchmade.

Benchmade - Freek 560, Drop-Point Blade, Plain Edge, Satin Finish, Black/Grey Versaflex Handle, Made in the USA

HIGH-QUALITY: The CPM-S30V stainless steel blade is extremely well-balanced, offering superb edge qualities and rust resistance. The Grivory and Versaflex dual durometer handle offers strength, comfort, and grip.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Freek 560 is a manual knife that can be opened and closed with either hand.
ALWAYS READY: The 560's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Freek 560's drop-point, utility blade style and all-around functionality make it ideal for everyday carry.

I recommend purchasing the Benchmade 560 Freek at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Para 3 C223GP Review

by Benjamin Schwartz 11 Comments

The Para 3 started as a fantasy: “Wouldn’t it be great if there were a smaller version of one of the most storied modern production knives of all time?” Then, this fantasy became a rumor, and that rumor became a confirmed project. Then there was a year-long lull. Then all of a sudden, in a whirlwind three months, the Para 3 was unveiled and released.

Buy the Spyderco Para 3 at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B01NBRLS5S” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]
Expectations were not just high, they were at that particular airless altitude where it’s hard to say that people were even aware of just what it was they were asking for. Companies like SOG, Cold Steel, and CRKT habitually release their knives in different sizes – why were we getting so excited about the Para 3?

Well certainly the Paramilitary 2 has a reputation few production knives can match. The knife community is almost unanimous in its praise for the PM2. Most of the criticism comes in the form of wishing for a smaller version. So if the Para 3 address this one issue, wouldn’t it be a perfecter version of a nearly-perfect knife?

No doubt about it, there’s a lot to talk about here. So let’s get into it.

General Dimensions and Blade Details

The Para 3 has a blade length of just about 3”, with a cutting edge of 2 5/8”, an overall length of 7 1/8”, and a weight of 3.37 oz. It is made in Golden, CO, and is the first Spyderco I’ve handled that was produced in their new facility. Although the Golden, CO knives are fundamentally different in overall ethos than the Taichung stuff, if this Para 3 is a fair representative of the new plant’s capabilities, they are every bit their equal in terms of fit and finish. Unlike some of those fine knives, however, the Para 3 doesn’t feel like a collectible in any sense. This is an immaculately finished EDC blade that you’re meant to use.

What do we call this particular Spyderco blade shape? To me it’s always been their most iconic, appearing on the PM2, the FFG Delica/Endura, and the full-size Military. It’s a great shape for everyday cutting, with all the cutting surfaces you want: straight edge, belly, and a pointy tip. Little performance is lost in the transition to a sub-3” cutting edge, either. It might be a little less efficient in long cuts (as through cardboard), but it gains a little more maneuverability, and that seems like a fair trade.

Spyderco is thought of as an ergonomics-oriented company, but they also always emphasize cutting performance. The Para 3 embodies a lot of Spyderco philosophies, but perhaps this one most of all. The blade stock is thicker than even the saber ground Delica, and yet the flat grind is such that the Para 3 remains a top-tier slicer. It’s tough and aggressive when it needs to be, but graceful and delicate when the situation calls for it. The satin finish is perfectly done to reduce friction as well – definitely a better finish than Taichung.

Some would have it that Spyderco’s S30V is sub-par, but others praise it to the skies. After using it on my Zulu, PM2, and now Para 3, I’m comfortable saying it’s very good. It doesn’t stay hyper keen after a day or two of frequent use, but it retains a clean, usable edge for a very long time. As for sharpening – well, I’m beginning to learn that any steel requires time and attention to sharpen properly. Be patient and maintain a steady hand, and it’s possible to get S30V very sharp, even with rudimentary skills and entry-level equipment.

Handle, Ergonomics, and Pocket Clip

The Para 3’s handle is very similar, but not identical to, the PM2’s. In addition to the obvious reductions in length, it has a more curved spine than its bigger brother. The edges of the G-10 have also been hit with a mild chamfer. Material choices are the expected (but excellent nevertheless) G-10 with nested stainless steel liners.

I think it’s safe to say that the ergonomics are what makes the PM2 so popular. Rarely is a knife so agreeable in the hand, and when it is, it allows all the other excellent elements to shine even brighter. The Para 3’s ergonomics is a story in three parts, starting with the forward finger choil and ending, surprisingly, with the clip.

Utilizing the forward choil, the Para 3’s ergos are excellent. Control over the smaller blade is exemplary, and you’ll have no problem with most cutting tasks. Even smaller details contribute: the curved butt end keeps things comfortable when you’re holding the knife hard or pressing down during a cut. Also, thanks to Spyderco for keeping the finger choil the same size as on the PM2. Nothing more disappointing (nor weirdly prevalent) than a too-small finger choil.

Moving down toward the main part of the handle, the news is less good. If I’m not using the choil, I can’t quite fit all four of my fingers in the main portion of the handle. My pinky usually lands right on the beak at the back, or falls back behind it. The beak isn’t so pointy that it would create a hot spot during most use, but the PM2 was so accommodating in both grip styles that it’s a bummer the smaller Para 3 can’t quite pull it off.

The clip also presents issues. The Spyderco spoon clip is utterly solid in and of itself. I have no complaints with the way it works as a pocket clip. Early reviews/opinions of the Para 3 have lamented the fact that it doesn’t carry deeply due to the large lanyard hole, which has to go above the clip instead of beside it as on the PM2. This means that a good bit of knife is sticking out of your pocket. I didn’t mind this, but I did mind the way the clip interferes with the grip in both positions. The problem is that it goes across so much of the usable handle it’s bound to press uncomfortably somewhere at some point. Not a constant hotspot, but it is noticeable enough to meaningfully detract from the in-hand experience.

As you can see from my pictures, I found a solution to this particular problem. Casey Lynch of Lynch Northwest is well-known for his aftermarket Spyderco pocket clips, and his short clip works perfectly on the Para 3 – and I mean perfectly: it feels like it was made specifically for this knife, and it fixes every issue the stock clip presents. The deep carry is just a bonus for me. Do I think you need the clip to enjoy the Para 3? No. Even stock, ergonomics are well above average. They just aren’t quite as good as the PM2 and the clip helps close that gap.

Deployment and Lockup

If you do a deep-dive on their forums, you’ll find that Spyderco’s bushing/stepped pivot system has been the subject of much discussion over the years. Nobody questions the fast deployment and free-swinging blade, just the variance in terms of lockup from knife to knife. You can get a PM2 that deploys with lightning speed, but you’ll rarely find one that you can dial all the blade play out of, no matter how slight. That was the case with my PM2, although it never bothered me.

My Para 3 appears to have the same pivot, but is even faster than my PM2 to deploy. It flips open with any sort of positive pressure at all – truly thoughtless deployment. It also stands firm once locked up, with nary a hint of play in any direction. On the PM2 I’ve found the Compression Lock to be a somewhat finicky one to maintain, but I’ll chalk that up to my inexperience rather than some mechanical failing. In terms of the Specialty Locks I think I like the Compression Lock best, despite my personal hang-ups. It offers serious strength while still keeping deployment smooth and fluid.

Para 3 Vs. Sage 5

The Para 3’s strongest competition comes from within Spyderco’s catalogue – and it’s NOT the PM2. I know a lot of people will get both, but to me the size difference is enough to put them in separate knife categories. The Sage 5, however, was released just months ahead of the Para 3, and is in the same product class of the PM3: EDC Compression Lock folder with a circa 3” blade.

The Sage 5 doesn’t have the mystique of the Para 3, but it is quite competitive in an objective sense. It’s lighter and it is better in the hand. The little beak and ill-placed clip that cause so much ergonomic drama on the Para 3 are gone on the Sage 5.

The Para 3, however, is an unquestionably better rendition of the Compression Lock: faster deployment and non-existent blade play where the Sage 5 is sluggish and has a little wobble. It is also better balanced; both knives offer phenomenal blade control but the Para 3 is more graceful and responsive.

How about cost? Well, the Sage 5 is about $15 more – not enough to give most of us pause, but tangible. And I’ll say that I think the Para 3 is perfectly priced. It is worth exactly $120 to me, and pretty much sets the limit for what I consider sensible spending on a pocket knife.

Ultimately, you can’t go wrong with either, and a full-fledged showdown between the two might be worth doing, but off the cuff I’m giving the nod to the Para 3: ergonomics are important, and the Sage 5 edges out the Para 3 in this category, but I like the blade shape and mechanics better on the Para 3, and it is certainly not a disaster in hand. And hey, you can use the $15 you save to buy a Casey Lynch clip and solve half of that problem anyway.

Spyderco Para 3 Review – Final Thoughts

The Para 3 has been so long in the coming that in some ways it’s just a relief to be able to say a bunch of nice things about it. I was a little skeptical that scaling down the PM2 would be redundant, but Spyderco managed to make it feel like a different knife, and a great one at that.

That being said I’m also not totally blown away. Some things to consider: If you can legally own the PM2, I still think it edges the Para 3 out in terms of design. Technically they aren’t in the same use category, but they do share design fundamentals and I’d rather have more variety amongst my tools than two very similar albeit excellent knives. The Delica 4 is a great EDC knife for half the price. There is also the Sage 5 to consider, as well as knives like the Native 5 and Caly 3.

So I guess the worst thing I can say about the Para 3 is that it’s just another great Spyderco design. This is an excellent follow-up to what is arguably their best knife. Is it a must buy world beater? No. But Spyderco managed to bring something long wished-for to life without losing the magic, and in and of itself that’s an accomplishment.

[easyazon_block add_to_cart=”default” align=”center” asin=”B01NBRLS5S” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

Editor: I recommend purchasing the Paramilitary 3 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews, and keep this review train running. As always, any and all support is greatly appreciated.

Leatherman Charge TTi Review

by Grayson Parker 18 Comments

Last Updated: July 27, 2019

I grew up with Leatherman tools. My dad always carried one, and to this day he still has his Leatherman Juice on or around him most of the time. In Scouting, most people carried a multitool of some kind. The first knife that I cut myself with was my dad’s Leatherman Wave. When we climbed Mt. Whitney, I didn’t take a bushcraft knife, I didn’t take a modern folder; all I had was a Leatherman Squirt PS4. If you can’t tell by this point, I’ve got a lot of love for Leatherman tools.

Buy the Leatherman Charge at BladeHQ

No products found.

Under those circumstances, it’s pretty obvious why I’d be drawn to the Leatherman Charge TTi. Full size, all locking tools, built like a tank from materials even a knife snob couldn’t turn their nose up at; you see where I’m going. Last Christmas I decided to take the plunge and purchase one. It’s less and more than what I expected, and I’ll let you decide if that’s a good thing.

I’m sure every gear nut knows this feeling: you only need a tool when you don’t have it with you. That’s part of the problem here. I’ve carried the Charge in the pocket, on my belt, or in a bag for more than a month, and all the tasks I thought I’d be using it for disappeared whenever it was around. Who knows, maybe the plumbing was intimidated into submission.

General Dimensions and Tools

The Charge TTi has a closed length of 4” and a blade length of 2.9”. It’s .8” thick, and weighs 8.89 oz. I haven’t done the math, but it’s approximately heavy enough to qualify as assault with a deadly weapon if thrown. Partially responsible for the dreadnought class tonnage is that all the tools lock while open, a design choice that I still don’t know if I agree with yet. On one hand, it’s comforting to know that the blades won’t be snipping my fingers off if I do something stupid. On the other, I don’t know why an eyeglass screwdriver needs to lock. There’s a bit of play in all the locks, but that’s par for the course with multitools.

You can check out all the tools on the Charge through this link, the below chart, or the picture below that. I can’t think of a tool they left out, and their inclusion of a flathead screwdriver when the Charge already has two bit drivers suggests they were running out of ideas. That, or they knew too many folks just used the flathead for prying open paint cans and wanted to make replacement easier. Either way, all appropriate tools are present.

Needlenose Pliers	S30V Blade	Can/Bottle Opener
Regular Pliers	420HC Serrated Blade	Wood/Metal File
Hard-Wire Cutters	Saw	Diamond Coated File
Wire Cutter	Spring-Action Scissors	Large Bit Driver
Crimper	Cutting Hook	Small Bit Driver
Wire Stripper	Ruler	Medium Screwdriver

As I noted earlier, the Charge frightened away most of the chores that I would have used it for, but I was able to reach for it a few times. The pliers (which are cast, not machined) are wide and aggressive enough to remove the aerators from sinks, yet come to enough of a needle point for splinter removal. I didn’t use the blade hard enough to push the S30V to its limits, but it worked fine on boxes, apples, and spreading condiments on a sandwich. More than a few bottles of beer were opened as well. The only complaint I have is the absence of replaceable wire cutters, which are common enough in other Leatherman tools that I can’t see why they weren’t included.

Handle, Ergonomics, and Carry

The handles (if you couldn’t guess) are made of titanium. Well, the scales are. The non-tool guts of the knife are made of steel; I don’t even want to know how difficult the machining would be otherwise. By multitool standards the construction is pretty tight. Nominally, it’s held together with torx screws, but that would imply that you can disassemble it. This is not the case. For some reason that only the engineers at Leatherman know, these torx bits have little pins in them, which makes them incompatible with most torx drivers. A quibble, but a galling one. Before I get too negative, I will note that the finish left on the scales is truly beautiful, in a chipped stone kind of way.

Imagine a brick. Now shrink it, make it a little slimmer along the way, and put it in your hand. That covers the essential points of the ergonomics here. Normally I wouldn’t be so dismissive, but compared to the Skeletool the Charge is lackluster at best. To be fair: the edges are rounded, and I’ve never felt a hotspot, but it doesn’t conform to your palm the way other Leatherman tools do. If you’re carrying the Charge with the pocket clip, then disregard my line about “never feeling a hotspot.” You should have a good idea why farther down.

Take that same shrunken brick and strap it to your belt. Honestly, it’s not that bad that way. If you’re working in an industrial setting, no one is going to care about a multitool, and even most offices won’t mind a Leatherman on your belt. The worst I can say is that it can compete for space with any bag you might have, depending on how you wear it. Mine came with the leather sheath, and I haven’t had any problems with it. The side pockets on it are nice for a AAA flashlight and a mini sharpie.

Are you feeling particularly brave? Clip it to your pocket.

Leatherman Charge TTi Review – Final Thoughts

If you walked away from this review with the impression that I don’t like the Charge, I’m sorry. I can see that in many ways it’s a great tool, and deserves to be on the shortlist of high end multitools. This is probably just a consequence of my expectations being in the wrong place. A carpenter, an electrician, or anyone that does a lot of work with their hands would probably love having this on their belt. In other words: “it’s not you, it’s me.”

Funnily enough, its stiffest competition comes from within the brand, in the form of the Leatherman Wave. The Wave shares most of the design language of the Charge: a full set of locking tools, outside accessible blades, and a nearly identical toolset. Of course, it doesn’t have the premium materials that the Charge TTi does, but it also costs half as much. Whether those materials are worth the premium is up to you. Leatherman isn’t the only game in town; Victorinox, Multitasker, Gerber, and SOG all make plier centric multitools. I imagine that I’d have similar complaints if I were to review any of their offerings, as they’re all near the same weight or heavier.

At the end of the day, who should buy this? Well, despite its staid design, it really is the top of the heap. If you want a multitool that has the same materials as a Spyderco Sage 2, this is your only option. The all-locking tools may be unnecessary to me, but a godsend to someone else. It’s a nice enough object that I’m not going to get rid of mine; this’ll just be consigned to the glove box, where it can do some real good in a pinch.

Next up – the ZT 0900. You bastards finally got to me.

LEATHERMAN - Charge TTI Titanium Multitool with Spring-Action Scissors and Cutting Hook, Stainless Steel with Nylon Sheath (FFP)

READY FOR ANYTHING: All the most requested features in one good-looking, functional tool. Take it everywhere, use it anywhere.
FIT MORE FUNCTIONALITY: A variety of pliers, wire cutters, wire crimper and stripper, serrated and regular knives, saw, spring-action scissors, cutting hook, can and bottle openers, files, screwdrivers, and a ruler.
LET’S BE PRACTICAL: Sometimes you only have one hand to spare. The Charge TTi only requires one hand to open and use all the tools, even the ones that aren’t accessible from the outside. And with a locking blade, you can cut with confidence.
ALWAYS ON HAND: Equipped with a pocket clip and quick-release lanyard ring, your Charge TTi is always within reach and ready to work.
GUARANTEED: Our 25-year limited warranty ensures that your Leatherman will give you many years of dependable service. Just send it in and we’ll fix it up. All Leatherman multitools are made and repaired right here in the USA.

I recommend purchasing the Leatherman Charge TTi at Amazon, or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews. Any and all support is greatly appreciated. Thank you very much.