Folding Knives

Benchmade Dejavoo 740 Review

Last Updated: August 12, 2019
Today I am taking a look at the ultra classy Benchmade Dejavoo. Designed by the late Bob Lum, known for his simple and elegant designs and the Dejavoo is no exception. Now that he is no longer with us, his custom pieces are becoming incredibly difficult to find so for many the only way to experience his work is through a collaboration like he did here with Benchmade.

Buy on Amazon

Purpose

As far as utilitly is concerned, the Dejavoo is in an interesting position. While I wouldn’t put it directly in the tactical role (not a lot of traction on the handle or spine, not the strongest lock), it could certainly fill that void in a pinch. Also, it’s a little large for a so called “Gents Folder,” although I think it’s a fine looking knife and is suitably refined for that role. For the same reason it wouldn’t make the top of my list for an EDC knife, although it is relatively light and would make a pretty exotic EDC blade (the “mini” is a good size for EDC). Yes the Dejavoo is somethng of an anomaly and I think for most this is more of a collectible knife, especially since Lum’s passing (RIP).

General Dimensions and Blade Details

The full size Dejavoo sports a blade just under 4 inches (3.95″ to be exact) with an overall length of 9.12″ and a weight of 4.10oz (3.2″ blade and 3.5 ounce weight on the 745). 4 ounces is impressive when you consider how much knife you are getting here… and believe me, you are getting plenty of knife. Not only is the Dejavoo big, but it’s beautiful. The long slender blade arcs slightly and a thin swedge trails almost the entire length of the spine. It’s a beautiful, almost peaceful design that is distinctly “Lum” and innately appealing. I know the looks of this knife has enchanted many over the years – even the name “Dejavoo” hints to some magic lurking beneath the steel and G10.

And speaking of steel, the blade on the 740 is made of a thick piece of S30V, a high end steel that I like because of the great combination of edge retention, corrosion resistance and ability to take a razor sharp edge. Benchmade accentuated that great steel by giving the Dejavoo a full flat grind and a really nice factory edge.

Handle, Ergonomics and Pocket Clip

The handle of the Dejavoo is also pretty special. Just by looking at the pictures you can see the attention to detail Benchmade put in here. It has full steel liners with some very nicely finished G10 scales laid over it. The G10 is relatively smooth, and lightly finished to show the “grain” while still supplying some grip. It adds another layer of class to look of the knife. The handle is a semi flow through design, and uses a black backspacer en lieu of pillars. Everything is bolted together so you can take this knife apart if need be. The liners are also kind of special; the locking liner is made of titanium and the non locking side is made of 420J stainless steel (very tough) that has been milled out to lighten up the knife and help it feel “alive” in your hand.

I also have to say that the Dejavoo has some great ergonomics. First of all, the 740 is a good sized knife, so you are going to have plenty of real estate to accommodate various grips. Indeed, the Dejavoo feels good in either a forward or reverse grip and I don’t find myself struggling to find space for all my fingers. Also, the design itself is great. Your hand will fall in place, it’s not awkward or uncomfortable at all.

From a traction standpoint, this isn’t the grippiest knife. It’s a smooth handle, obviously designed for form over function. If you are buying this as a hard core “tactical knife” I am sure you would be disappointed. From a collector knife or even an EDC knife standpoint, this really isn’t an issue. Additionally, you will find jimping to be woefully absent… again, not really an issue in my opinion. There is a rather prominent thumb ramp (which is mirrored in the choil area, almost appearing like a “hilt” when the knife is closed) and it catches the hand nicely. Again, obviously a nod to the form over function approach that Benchmade sometimes takes with their higher end knives. In my opinion, if you want a knife that you can take into a foxhole with you, consider something built for the task, like an Emerson.

It is a nice looking clip made of a piece of folded over stainless steel. The clip rides very low, it has great retention and is well polished. My only beef is that it is right side tip down only.

Lock-up and Deployment

The Dejavoo features a thumb hole aka a “Spyderhole”. I love thumb holes, they are great designs, and it works really well here – both functionally and aesthetically. I am not sure what the deal is in terms of trademark infringement with Spyderco. Ironically, hardcore Spyderco fans may actually not like this knife because of the use of the Spyderhole, as they may view that Benchmade ripped off the design. Eh, that is the subject for another post (or perhaps a law review article) so I’ll just say “it is what it is.”

One thing to note is that the blade retention can use some work… actually it could use a lot of work as the blade practically falls out of the handle. That is a problem, especially if you are going to carry the knife loosely in a pocket or bag. It’s weird because my 2 biggest problems with the knife; tip down carry, and weak blade retention, kind of cancel themselves out because if you use the pocket clip, it’s going to be hard to accidently stab yourself when carried tip down.

As for the lock, Benchmade went with a liner lock here. I can see an argument for wanting an axis lock with this knife (and yeah, I love the Axis lock), but in truth, I think it would make for a totally different looking knife. There are plenty of options for axis lock fans (Griptilian, Onslaught, etc), and this stays true to the original Lum design, so a liner lock is fine with me. Lockup is nice and tight, although the lock bar itself is not the strongest I have seen. People have been fixing both the weak lock and retention by wedging a small piece of paper between the scale and the liner down by the butt of the handle.

Value

As far as value is concerned, I think price (just north of $120 for the model shown here) is fair when you consider the great materials and fit and finish. The smaller version sells for a little less and might make for a more practical EDC type knife. I think they are both fairly priced.

Benchmade Dejavoo Review – Final Thoughts

Well, what can I say? The Dejavoo is such a beautiful knife it makes it easy to ignore the little flaws. The major flaws, issues with retention and lockup, can be easily fixed with a small piece of paper wedged in between the lock bar and the scale. Color the paper with a Sharpie and you won’t even see it. Some might find modifying a brand new $100+ knife with a post-it-note to be a cardinal sin. However, there is so much that the Dejavoo does right, and it does it with class… it truly is worth a second look.

Benchmade Knives Mini-Dejavoo, Black G-10, Plain

Ergonomic Handle Design Round
Thumb-Hole Opener
Ultra-Premium Blade Steel
Country of origin: USA

Photo Credits: Many many thanks to Voygin for use of the beautiful photos. He does amazing work and has a very impressive collection.

Al Mar Hawk Ultralight Review

by Dan Jackson 7 Comments

From big to small, I review them all. That little jingle may be pretty lame, but it is also pretty true. My last review was of the ESEE Junglas, 16 inches of high carbon steel. Worth a look if want a knife that you can strap to your back and enter the breach with.

Buy the Al Mar Hawk at BladeHQ

Buy on Amazon

Today’s topic is on the other end of the spectrum, a feather light folder by Al Mar knives. This is my first Al Mar knife review, and it’s a company I have had in my sights for a while now. For those unfamiliar with Al Mar, there is actually a long and rich history that could become an article of its own. In a couple sentences, Al Mar was the head of knife design for Gerber, and served in that position for over 10 years. Al then formed his own company in 1979, Al Mar Knives. The knives are made in Seki City, Japan and follow that area’s rich tradition of knife and sword making. Al Mar died in 1992, but the company is still producing knives to this day.

The Al Mar Hawk is the smallest knife in their series of traditional folders, and has some interesting quirks that are worth mentioning. Well built and hand finished, the details are what make this knife enduring, for better or for worse. If you are looking for something ultralight and a little different, the Hawk could be just the ticket.

Purpose

The Al Mar Hawk is a special little knife, and for many, it serves a special purpose. A quintessential “gentleman’s folder,” the Hawk could make a discrete and stylish companion anywhere from the grocery store to a black tie event. It is certainly a good choice for the office, as it is about as inconspicuous and people friendly as knives get. It could also serve as an EDC blade (or backup EDC blade) for those looking for something lightweight and high quality. It also a knife that appeals to collectors. I find it to be a handsome little blade that could easily be kept in my desk or dresser and admired (and perhaps even used) from time to time.

General Dimensions and Blade Details

The Al Mar Hawk has a 3.25 inch handle, with a 2.75 inch blade and an overall length of 6 inches. This is among the lightest knives I have handled, weighing in just under an ounce. This knife disappears into pockets and is literally a knife that you will forget you are carrying.

The blade, like the rest of the knife, is slender and understated. It is made of relatively thin stock, which combined with a flat grind makes it a phenomenal slicer. It features a simple drop point shape and is made from AUS-8 steel. AUS-8 isn’t a “wundersteele” by any stretch of the imagination, but again, you have to understand that this is a Japanese knife, made with a Japanese steel and certain traditions and eccentricities are part of what makes the knife special. In today’s world of high end super steels, now might be a good time to remind you that AUS-8 is by no means a bad steel. I find it takes a very sharp edge although it may not hold that edge as long as say, VG-10, another Japanese steel.

Handle, Ergonomics and Pocket Clip

The handle of the Al Mar Hawk is simple and elegant with it’s pair of piano black linen micarta scales. The hand rubbed micarta is smooth, but not slippery, providing a pleasant feel. The handle is punctuated by flush mounted nickle silver rivets given an almost mirror-polish. There are no liners or bolsters, which is part of the reason why this knife is so lightweight. Despite this omission the handle feels solid and secure, with a stainless steel lock back bar running the length of the handle.

Another feature absent from the Hawk is a pocket clip. For such a small knife, it hardly seems necessary, and in fact it may be somewhat offensive to have a clip hanging off of the otherwise svelte lines of this little folder. If a pocket clip is a “must have,” consider upgrading to the slightly larger Eagle or Falcon models. The clips are very nice with a black coating and red Al Mar logo. The Hawk does have a lanyard hole, which could aid in retrieval.

The ergonomics of the Hawk are surprisingly pleasant for such a small design. The knife fits comfortably in hand and I have no complaints. There is no jimping, thumb ramp or choil, so as for aggressive use, you will probably want to carry another knife. For the knife’s purpose I think the current configuration it works just fine.

Deployment and Lock-up

The Hawk utilizes a couple good sized thumb studs to facilitate easy deployment. The pivot point on this knife isn’t adjustable (in fact, the entire knife is riveted together), but due to the high level of quality control, you can be certain that the knife will come well tuned from the factory. The deployment starts off on the stiff side, but after some use the knife will break in and you will find that the blade deploys smoothly, and can be flicked out if necessary.

The Hawk uses a lock-back mechanism, located near the front of the knife. This is another classic design element and it holds the blade securely in place. Of course, from such a small and lightweight knife will have its disadvantages and one is that the lock is not particularly strong. For light EDC tasks that you would expect to do with a gentleman’s folder or dress knife, the Hawk will serve admirably. While there isn’t any play in the knife, the liner-less design lends itself to some flex. Don’t expect to chop down a tree or use the knife as a crow bar and I think you will be satisfied with the lock’s performance.

Al Mark Hawk Review – Final Thoughts

At the time of this article, the Hawk is hovering around $100. That isn’t cheap for a little knife. That said, it is very well built, made in Japan, hand finished, etc – in may ways you get what you pay for. The materials are good, but for the money I’d love to see VG-10 in place of the AUS-8. Also, I wouldn’t complain if they could squeeze a pocket clip on there (you could always take it off).

It goes without saying that you are also paying for exclusivity. It adds just a touch of class to your every day gear, any few people will have it, let alone recognize what it is. So I would conclude that as far as value goes, this knife is definitely more of a luxury item than a high value item. But, if you like fine knives, or don’t want to look like an evil knife guy on your next trip to the water cooler, the Hawk could be an easily justified purchase that will provide years of service and enjoyment.

Al Mar Hawk Folding Knives, Black Pearl

Made using the highest quality components
Tested for reliability. Satin blade finish
3 1/4 inch length

If you are thinking of buying an Al Mar Hawk, please consider purchasing it at Amazon or BladeHQ. Thanks for checking out the review.

Photo Credits: Many thanks to Bernard of EveryDay-Carry.com for the exceptional pictures of the Al Mar Hawk.

For those who are curious (and I know I was) the watch is a Seiko SRP027K1 and the Spyderco pictured is a Leafstorm that Bernard has modified by dying the handle black. If you didn’t already know, Bernard is a fellow gear and knife nut and he runs an endlessly entertaining blog on EDC options. It was really cool of him to let me feature his photography – thanks again!

Spyderco Manix 2 Review

by Dan Jackson 10 Comments

Last Updated: July 31, 2019
The Spyderco Manix 2 is one of those knives that I have been meaning to review pretty much since the start of this website. I’ve examined a lot of blades since then and now I finally have my thoughts on the Manix 2 together and can write on this fantastic heavy duty folding knife made in the good ole USA.

Buy the Spyderco Manix 2 at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Manix 2 is what I would call a “medium” sized folding knife. It is stoutly built and highly functional. We are looking at an overall length of 8 inches and a blade length of 3-3/8 inches. At 5 ounces this knife is going to be heavier than most other knives “in its class” but what you get for this weight is a strong design with killer ergonomics. Just to put things into perspective, the Spyderco Tenacious has roughly the same dimensions but comes in a full ounce lighter.

Part of what makes the Manix 2 on the heavier side is the hollow saber grind (also it has full liners – more on that later). This makes for a stronger blade, but the trade off is weight. Many users don’t particularly care for the saber grind, preferring a full flat grind. In that case, I would advise trying to find a “sprint run” (limited edition) of the knife as Spyderco often makes them with a full flat grind (like the version wearing BD30P in my video review). The blade shape is a classic leaf design and the tip is fairly delicate. There isn’t a ton of belly on this knife, but I find its plenty for most every day tasks.

Blade steel on the standard Manix 2 is 154CM. A classic steel, 154CM is known for being an all around performer. Edge retention, rust resistance, toughness and sharpen-ability are all good.

I gotta say though if you want a more exotic steel or a full flat grind, Spyderco has been rolling out some really cool sprint runs of this knife. It’s going to cost you more, but it’s possible to get this knife in S30V or even S90V, although you might have to head to the secondary market to do it. Who knows, down the road Spyderco might release this knife exclusively with a full flat grind like they did with the Endura and Delica, so if you like the saber grind I would get it while you can.

Handle, Ergonomics and Pocket Clip

The Manix 2 has a tried and true handle design: G10 scales over stainless steel liners. The G10 on the standard Manix 2 is black and well textured. I would say the G10 is aggressively textured and provides great grip and tactile response. The liners run the entire length of the handle and are not milled out (or “skeletonized”) at all in the standard version which adds substantially to the weight of this knife. The handle is a partial flow through construction with a metal backspacer taking up the front part of the handle, and some pillars holding the back part of the handle together.

Another notable feature on this handle is the over-sized lanyard hole. For a stout blade like this, a large lanyard hole is a very practical feature – if you take this knife camping or regularly engage in long and heavy cutting tasks, a lanyard could be a great option for you.

The ergonomics on the Manix 2 is where this knife really shines. At a glance you can see all kinds of stuff going on with the handle. First off, you have two large choils. This allows you to choke up on the blade for detail work generally get a comfortable grip. Also, a liberal amount of jimping has been applied to many parts of the handle (including the thumb ramp and choil of the blade itself). This jimping is very sharp (some say it’s even “too sharp”) and ensures your fingers wont slip. This is a super comfortable knife and it works well in many grips. Combine that with that extra bit of weight and I find it hard to put this one down.

The only downside to the great ergonomics is that the handle (and folded knife) is kind of bulky in the pocket. You get a great handle but you lose some ease of carry.

The pocket clip is a classic Spyderco “hourglass” clip, mounted very high on the knife for a nice deep carry. It’s not a 4 corners clip, but it allows for ambidextrous tip up carry which works very well for me. The rough G10 may start to tear up your pocket a little – if that happens you may want to consider sanding part of the G10 down.

Deployment and Lockup

Deployment with the Manix 2 is a snap. Spyderco selected an oversize 14mm thumb hole for this knife and it performs as well as it ever has. Of course, you have your standard phosphor bronze bushings which help speed things along, but I find the weight of the blade makes this knife deploy with great ease and authority.

The Manix 2 has a pretty unique locking system. It is a “ball lock” and it functions in fashion similar to a Benchmade Axis lock. A spring loaded piece (in this case a steel ball bearing partially encased in a chunk of polymer resin) is what holds the blade in place. The knife has a very solid lockup that can be disengaged without putting your fingers across the path of the blade. Note that the spring is very strong on this ball lock so it can be difficult disengage the lock with one hand and it may stick a little until the lock has fully broken in. I’ve found that it is entirely possible with a little practice to disengage the lock one handed (especially once the spring breaks in a little), but there may be a slight learning curve.

Also, please keep in mind what I said in the “purpose” section about spine whacks – while I think this is a very strong lock, it does appear to have an Achilles heel and there are confirmed reports of the lock failing when subjecting to spine whacks. I never advocate “spine whacking” a folding knife, but I want “keep it real” here and help you make a decision that is right for you.

Update – Apparently Spyderco has since fixed the problem with the lock mechanism failing when spine whacked. These new knives have a black ball lock rather than a clear one. I have yet to get my hands on one of these new versions, so maybe it’s time I picked up a new Manix 2 XL and checked it out.

Value

Currently you can get a Manix 2 for right around $80 shipped, and a low as $70 shipped if you want a combo edge or serrated version. At either price I think the Manix packs a ton of value. When you consider that this knife has excellent blade steel, an awesome handle, a rock solid locking mechanism AND is made in the United States, it definitely has some value. Also, this isn’t some dinky folder either. This thing is built tough and I would put the ball lock right up there with the Axis lock and could see this knife being used hard for a long time.

Spyderco Manix 2 Review – Final Thoughts

Spyderco has done it again. The Manix 2 pretty much has it all. Two of my biggest gripes include that the knife doesn’t come with a fully flat ground blade, and it’s heavy. If you opt for a sprint run version you can avoid these negative aspects. I also tend to find the ball lock a little clunky in comparison to an axis lock, but I know plenty of people who prefer Spyderco’s ball lock.

While I can’t say it’s my absolute favorite Spyderco (I’d put both the Sage 1 and Paramilitary 2 ahead of the Manix – just my preference), it’s a beefy knife with solid ergonomics, and is both well thought out and highly functional. Although the price tag has crept up over the years, I also like how the Manix 2 is made in America and can be had for under $100. The collect-ability of the knife is also very cool as Spyderco has released numerous Sprint Runs and spin off versions of the knife.

Spyderco Manix 2 Signature Knife with 3.37" CPM S30V Steel Blade and Durable Black G-10 Handle - PlainEdge - C101GP2

Superior Cutting Performance - Crafted with a 3.37-inch full-flat-ground CPM S30V stainless steel blade, this knife provides excellent edge retention, sharpness, and corrosion resistance, making it a reliable choice for demanding cutting tasks.
Ergonomic Grip Design - The durable black G-10 handle is thoughtfully contoured and textured, offering a secure and comfortable grip that enhances control, reduces hand fatigue, and improves safety during extended use.
Reliable Ball Bearing Lock - Equipped with Spyderco's patented Ball Bearing Lock, this mechanism provides smooth, safe, and ambidextrous operation, ensuring secure handling and easy one-handed use.
Customizable Carry Options - Includes a reversible pocket clip, allowing for convenient tip-up carry on either side, so users can customize the carry position to suit personal preference and comfort.
Enhanced Durability for Tough Use - Built with premium materials and a rugged construction, the Manix 2 is designed to withstand intense use, making it ideal for both everyday tasks and demanding outdoor adventures without compromising performance.

I recommend purchasing the Manix 2 at Amazon.com or BladeHQ.

Photo Credits: Many thanks to Cougar337 for the beautiful Manix 2 photographs! Thanks again!!

Kershaw Junkyard Dog II Review

by Dan Jackson 12 Comments

Last Updated: August 11, 2019
To the average person the pocket knife has remained virtually unchanged over the years. But as collectors and enthusiasts know, this industry is full of innovation. In fact, I argue that there has been more innovation in knife design over the past 20 years than in the previous 200 years. The Junkyard Dog II Composite (JYD II) is a great example of this, with its ultra cool composite blade. Designed by Tim Galyean, the JYD II is a fantastic blend of fantasy and function and is proudly made in the USA.

No products found.

Purpose

The JYD II is not a small knife. I’ve read reviews where people are calling it a tactical. I’m not ready to call it that, and review it from that perspective, but I can kinda see where they are coming from. I would say the JYD II is more of a heavy duty EDC/utility knife. In a pinch it could be pressed into tactical use, but I think the blade shape was meant more for daily tasks (and hard tasks at that). Your mileage may vary.

General Dimensions and Blade Details

The Junkyard Dog II has a 3-3/4 inch blade and a closed length of 4 7/8 inches. This puts it right around 8 11/16 inches overall with a weight of 5.2 ounces. Like I said, the JYD II is not a small knife. You probably won’t want to bust this one out in the office, but it could make for a nice EDC if your job allows it. Some might find it a little on the heavy side but I think it is well worth it when you consider how much knife you are getting.

The blade is probably the first thing you will notice (assuming you get the ultra cool composite blade version – which I totally suggest doing if you are interested in this knife). This blade is in fact made of two kinds of steel. Kershaw chose a high end steel for the edge (CPM D2 tool steel), and a tough but decidedly less expensive steel for the rest of the blade (Sandvik 14C28N). From what I’ve gathered this is to reduce cost and make for a cool looking knife. Both reasons sound great to me.

On the subject of steel, the D2 edge steel is a great choice, with the CPM version being better. CPM stands for “Crucible Partice Metalurgy” and is a special process developed by the steel’s manufacturer, Crucible Metals. What Crucible does here essentially is powder the steel (by forcing the molten metal through a high pressure nozzle) and puts it back together so the grains are ultra tight on the molecular level. This was a poor explanation, but understand that the result is a finer steel and holds a better edge. Since D2 is already great stuff, we are talking about a pretty fancy piece of steel here.

Sandvik 14C28N is less impressive than the CPM D2, but it is still a great steel on its own (used in many popular Kershaw knives, like the Skyline and Scallion) and makes for an awesome “placeholder” for the D2.

So you are probably wondering how Kershaw puts these 2 pieces of steel together, and I was very curious myself. Apparently both pieces are laser cut, and then braze welded together with copper. The end result is a single piece of steel which is subsequently finished like any other Kershaw knife. The final bond is very strong. Kershaw claims it is as strong as a single piece of steel. I’ve never heard of the metal coming apart.

Ok, so a quick word on the blade shape. Again, I am hesitant to label this a “tactical knife” (not that my labels even matter – use the knife however you like) because of the blade shape. The tip is fairly blunt, and quite sturdy. Great for tough jobs, especially with that D2, but perhaps not the best choice for a defensive tool. Also, I gotta say the blade shape and overall “flow” of the knife kind of has a Ken Onion feel to it. Tim did work with Ken Onion at Kershaw, so perhaps that is where we get this design cue. Personally, I like it.

Handle, Ergonomics and Pocket Clip

The handle design and construction on the Junkyard Dog II is outstanding. We are looking at fairly typical handle construction: G10 over 410 stainless steel liners. The liners themselves are far less typical because they are some of the thickest I have seen on a liner lock knife. The addition of a FRN backspacer provides even more strength and rigidity (but makes the knife more difficult to clean). The result is a heavily built handle with a rock solid feel. Kershaw did attempt to lighten things up a bit by milling out the liners, and I think 5.2 ounces is pretty good considering how big the blade is and how thick these liners are.

The ergonomics are another outstanding aspect of this knife. The very nice (and unique!) design to the handle fits the hand comfortably and the textured G10 allows for a great grip. There is some jimping on the spine, but it is pretty “round” stuff. Probably due to the finish Kershaw puts on their blades. If jimping is your thing, you might want to modify this one, but I don’t mind it as is. Overall, I am very pleased with the handle design and ergonomics.

Now the pocket clip, well, that is probably my least favorite part of the knife. First of all, it isn’t reversible or ambidextrous, and I think it is far too big. I’m not a fan of the wide and flashy design either. The design is more a matter of taste (the look kind of “flows” with the rest of the knife) but I really hope Kershaw addresses the reversible and ambidextrous aspects of the clip. That said, this is an otherwise outstanding knife, and I would seriously consider getting the handle drilled/tapped and a custom low-rider clip made by a knifemaker like my friend STR.

Deployment and Lock

Like many Kershaw knives, the JYD II uses a flipper for deployment. I like flippers alright, but I’d love to see some thumb studs on here too – it’s what I’m used to most. That said, the flipper and the phosphor bronze bushings do a great job with deployment and the Junkyard Dog II moves very fast. Something to note is that this knife does not have the speed-safe assisted open mechanism common on a lot of Kershaw knives. I like the unassisted opening so I don’t count this against the knife. I know some people really like the assisted opening knives.

I’ve already commented on the liner lock, but just to reiterate, this is one of the more solid liner lock knives I’ve held. Kershaw did not skimp on the steel here and the liner covers almost 50% of the blade when the knife is open – very impressive. Despite this heavy liner, it is still an easy knife to close with one hand.

Kershaw Junkyard Dog II Review – Final Thoughts

One last thing to comment on is the value, and this knife has tons of it. If you go for the non-composite version the JYD II can easily be had for under $50. You will be hard pressed to find a new knife this big, strong and well made for under $50 folks, that’s just a fact (and it’s made in America too). The composite version is of course going to be more expensive at around $75, but even still that is a good deal for a very nice and unique knife with a high quality edge.

Well as you probably gathered, I really like this knife. Combine the heavy construction with a comfortable handle, a great blade and a cool innovation like the composite steel and there is not much left for me to desire. That said, the pocket clip definitely gives me some grief, but I can say that about a lot of knives on the market. All in all this is a very solid offering from Kershaw.

No products found.

Benchmade 915 Triage Review

by Dan Jackson 17 Comments

Last Updated: July 28, 2019
Rescue knives often go unnoticed in the knife community. There are large groups of enthusiasts gathered around tactical, survival, and EDC knives, but I have yet to see the rescue knife develop such a loyal following. One could argue that the average person doesn’t “need” a rescue knife, but do we really have a need for the collection of high end tactical knives stashed away in the safe? No, I argue that rescue knives traditionally “aren’t as cool” in the eye of the average consumer, and as a result most people haven’t been as excited about them.

Buy the Benchmade Triage at BladeHQ

Buy on Amazon

Well Benchmade is working hard to end that stigma and show that rescue blades can be just as cool and collectible as any other type of knife, by introducing the 915 Triage. But this knife doesn’t just look good. The Triage is part of Benchmade’s “Black Class,” which means it’s been designed and built with professional use in mind.

General Dimensions and Blade Details

The Triage has an overall length of 8.2″, a 3.5″ blade, weighs 5.1 ounces, and is made in America. The Triage, like most rescue knives, is a pretty big knife. This is a beefy knife and it has some heft when compared with something like the Benchmade Griptilian, which is comparable in length yet weighs only 3.2 ounces. However, we have to remember that the Triage has some extra hardware (a 440c safety cutter and a carbide glass breaker), has full stainless steel liners, G10 scales, and is built for maximum strength and durability.

The Triage sports a modified sheepsfoot shape blade with a high flat grind and a fine, slightly curved edge with just a slight amount of belly. This blade style is essential for a rescue knife because the blunted tip allows you to get in close to people you are rescuing without stabbing them. The flip side is, if you need something with stabbing capabilities, the 915 won’t have them. But this is a specialized tool so it was wise not to try and compromise. You have the option of a plain or combo edge, with a BK1 matte black coating or a plain satin-finished blade.

Benchmade chose N680 stainless steel for the blade. Made by Bohler-Uddeholm, this Swedish steel is specifically formulated for high corrosion resistance, even in salt water environments. It should come as no surprise that Benchmade has been using this steel in a few of their dive knives with great success.

Benchmade heat treated the N680 on this particular knife to 57-59 HRc, which will maximizes toughness for this particular steel while providing good edge retention and sharpenability. I think this was a great choice for a rescue knife because again, this thing is going to get abused. Its going to get wet and it probably won’t be sharpened as often so the unique properties of this steel will help preserve performance and enhance durability.

Handle, Ergonomics, and Pocket Clip

The 915 Triage handle is a semi-open design with textured G10 (available in black shown here, or safety orange) over full stainless steel liners. Like many Benchmade liners, they are made of 420J, which is tough stuff. As I mentioned previously, this adds weight, but it also adds strength. In the high stress hard use environments I could see this knife being used, I think it’s a good trade-off. The G10 used here is plain in appearance, but extremely grippy thanks to the aggressive texture applied in the factory.

In addition to the grippy G10, the ergonomics of the 915 are quite solid. There is no jimping on the spine of the blade, but there is a good amount on the handle, and it allows for good purchase and control. The handle is also nice and large, offering a comfortable forward or reverse grip. Also, the ergos are good when you are using the hook-shaped safety cutter, which is important since many people will be buying the knife for that feature.

The pocket clip is a blackened version of Benchmade’s typical deep carry pocket clip. This is a strong clip with good retention. It buries the knife discretely into the pocket, but still leaves enough for the user to grab easily. The handle has been drilled and tapped for ambidextrous tip up carry. The Triage is a heavier knife, but it still caries well thanks to the strong deep carry clip. All said, I am a fan of this pocket clip.

Lock and Deployment

The 915 Triage uses the tried and true Benchmade Axis lock. I’ve talked about this lock at length, but suffice to say it’s one of my favorite locks on the market. The Axis lock is strong, yet it is still smooth and easy to disengage. I also like how it is completely ambidextrous, and that you you can keep your fingers away from the blade when closing. Lock up is solid on my knife. It is not uncommon for axis lock knives to develop some side to side play, and if that happens a little lock-tite and the turn of a torx wrench puts you back in business.

Deployment on the Triage is fast and smooth thanks to prominent ambidextrous thumb studs and phosphor bronze washers. This is a time-tested formula for Benchmade and it works here as well. That said, I would be curious to see what this knife is like with a thumb hole. The blade is already pretty wide, but it might work well with a thumb hole. At any rate, the knife opens and closes smoothly. Blade centering is good on my knife.

Special Features: Safety Cutter and Carbide Glass Breaker

For many people a big part about what makes this a rescue knife is the additional features. Namely, the safety cutter and glass breaker. The safety cutter folds out and features a large (and sharp!) hook. Benchmade chose 440C for the cutter and I think it’s an excellent choice. 440C is good steel and when it’s properly heat treated it will work well. A cutter like this is used in those situations where the relatively big blade is either impractical or impossible to use.

The cutter doesn’t have a true lock, it clicks in place kind of like a slip-joint. It is reasonably secure and the rescue hook blade is extremely sharp. This is not a novelty or gimmick – this will cut through seat belts, clothing, and even shoe leather with ease.

The carbide glass breaker is sunk into the butt of the handle. It’s not big, but it will get the job done.

Benchmade 915 Triage Review – Final Thoughts

The Triage is a thoughtfully designed and well made knife. I like the practical design, the high quality materials, and the outstanding fit and finish – which is par for the course when you are talking Benchmade. What I like is how Benchmade took the rescue knife concept, upgraded it, and also turned it into something cool.

I am not a first responder, so I can’t comment on the knife with regards to how well it works in a first responder situation, but I can say that this is a robust knife and unique knife. I see no reason why it wouldn’t work well in a rescue situation. The glass breaker and safety cutter are fully functional and made to Benchmade’s typical standards. The knife itself is fully functional: it’s comfortable to use, it cuts well, and is easy to maintain.

Whether you are an actual first responder looking for an every day tool, or a normal person wanting a heavy duty EDC, I think the 915 Triage has a lot to offer, and remains the coolest rescue knife to ever cross my desk.

Sale

Benchmade - Triage 916 Rescue Knife, Safety Hook and Glass Breaker with Black G10 Handle (916SBK)

HIGH-QUALITY: The N680 stainless steel blade has the best corrosion resistance of any blade steel, making it ideal for saltwater applications. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures.
MADE FOR RESCUE: The Triage 916's opposing bevel blunt-tip blade style, safety hook, and glass breaker make it ideal for rescue. It's al
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Triage 916 is a manual knife that can be opened and closed with either hand.
ALWAYS READY: The 916's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.

I recommend purchasing the Benchmade 915 Triage at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Mcusta Tactility Review

by Dan Jackson 8 Comments

Last Updated: August 3, 2019
I recently reviewed a Mcusta MC-1 and I was impressed by this relatively little-known Japanese knife manufacturer. Based out of Seki, Japan, Mcusta is part of the city’s proud cutlery making tradition that began hundreds of years ago. If you haven’t checked out my MC-1 review yet, I loved the high end materials and modern manufacturing integrated into its classic design.

Buy the Mcusta Tactility at BladeHQ

Buy on Amazon

Today I am looking at another knife from Mcusta, the Tactility. I had high hopes for the Tactility and it didn’t let me down, so lets dive right into the review.

Purpose

As the name suggests, the Tactility is designed to be a tactical knife. However, I would narrow that down to “fighting knife” or “emergency tactical” – I would reserve it as a last ditch defensive tool. It is a very well made knife, but it is slim and lightweight and has a fragile tip. This isn’t a knife you would want to bring into the dark heart of war. Rather I see this as a highly specialized fighting blade.

Also, because this knife is so beautiful, it easily fills the role of a collectible. It’s an exquisite knife, balanced and light. Many people will want the Tactility just for their collection.

I do not recommend this knife for EDC. The blade is almost 4″ long and has little belly. The choil is set back on the handle and is designed to maximize reach. Sure, nothing is preventing you from EDCing this knife – and I certainly wouldn’t try and stop you, but to me this is not an EDC knife.

General Dimensions and Blade Details

The Tactility has an overall length of 8.2″ and a weight of 3.4 ounces. The 3.75″ blade is a modified drop point design with a partial hollow grind. The blade design has a very sharp point, ideal for for piercing movements, while the long swedge reduces weight and provides strength down to the tip. The hollow ground blade is pretty thin, which makes this knife an excellent slicer. This knife practically melts through paper, the point is so fine and the edge is so keen. It cuts like nothing I have seen before.

You have a couple options for the blade steel, both of which center around VG-10. You can get plain VG-10 or a laminated blade; damascus over a VG-10 core (shown in the photographs). VG-10 is a proven steel that I have written on at length. Suffice to say, I like VG-10 a lot. Mcusta applies an excellent heat treat so the extreme sharpness, edge retention and corrosion resistance that you expect from a VG-10 blade is in full effect with the Tactility.

Handle, Ergonomics and Pocket Clip

The handle of the Tactility is ultra slim and can come in a variety of different handle scale materials (various colors of corian or micarta in addition to several hardwood options) over solid steel liners. The handle is a pillar, or flow through design (which I love) that is held together by 3 torx bolts and provides for a clean look and easy maintenance. The liners haven’t been milled out, which would typically be a complaint, but the knife is still a mere 3.4 ounces so I can’t complain. One thing I like about liners that aren’t milled out is that they are very easy to clean.

One thing to notice is the absence of a lanyard hole with this knife. I would never put a lanyard on this knife, but I know some people like the option so I wanted to mention it.

As far as ergonomics are concerned, when you consider the primary purpose of the Tactility, Mcusta did a good job with this knife. The handle is spacious allowing for comfortable forward and reverse grips. I like how the wood has been nicely contoured and features 4 finger grooves that fit the hand very well. There is a large choil that sits about an inch back on the handle. It makes choking up on the blade unnatural but it maximizes reach – critical for a tactical knife like this.

There isn’t much of a thumb ramp, and the only jimping is found on the liner. Given the position of the choil, I find the jiming more than adequate.

The Tactility has a very nice pocket clip. I like how it allows for reversible tip up carry. It rides ultra deep and has a classy decorative look to it – more of that laser cut steel for you. I found clip retention to be very good.

Deployment and Lock

Depeding on if you get the VG-10 or Damascus version the Tactility has either dual thumb studs or a nice “modified spyder-hole” for deployment. The hole looks something like a half moon and allows for very easy ambidextrous one hand opening. The thumb studs (shown) are oversized and mine were made of blued titanium. Mcusta uses their signature teflon washer system for “buttery smooth” opening. This knife deploys quickly and quietly. While the teflon washers may be a departure from what we are used to seeing, they do an excellent job getting the blade out of the handle.

The Tactility uses a very strong liner lock. Mine locked up super early and there was no blade play at all. When you deploy the knife it makes a soft “click” – very stealthy. I was super impressed with the lockup and included a picture to show you what I am talking about.

Mcusta Tactility Review – Final Thoughts

The Tactility is just an outstanding knife. The tolerances, finish and materials are all top notch. It’s going to be hard to find a deadlier folding knife in this price range. If you are looking for an all out weapon of a knife and enjoy extreme craftsmanship, the Tactility could be the knife for you. That said, for those seeking a “hard use” folder or tactical knife, I don’t think this would be the best fit. I don’t think it’s a fragile knife, but find this knife better suited to the collector or someone wanting a high end EDC or a gentleman’s folder tactical knife.

As far as value is concerned, at the time of this article this knife can be found in the $130-150 range depending on configuration. At that price I think this knife is a great value. I would liken the build quality to a comparably priced Spyderco (which is superb), and I rank these among the highest quality production folders money can buy. For those on the fence, I suggest taking the plunge because you will not be disappointed with this knife.

Mcusta MCU122DR Damascus Tactility

Crafted from the highest quality materials
Built for performance and durability
Made in Japan

I recommend purchasing the Mcusta Tactility at Amazon or BladeHQ.