Folding Knives

Zero Tolerance 0801 Review

Last Updated: August 7, 2019
Titanium framelock flippers. Are we sick of them yet? No? Great, because I’ve got another titanium framelock flipper review for you today. Given the rapid influx of titanium framelock flippers on the market, I initially thought that I would pass on the Zero Tolerance 0801. The wide shape, chunky build, and monochromatic look of the knife all lead me to quickly dismiss the knife.

Buy the Zero Tolerance 0801 at BladeHQ

Buy on Amazon

It wasn’t until I handled the 0801 in person that I decided to buy the it. Oddly enough, I became so intrigued that I ended up acquiring 2 of these at once – the standard version, as well as the 0801CF “Copperhead” limited release version of it. This review will focus on the 0801, as the 0801CF is a true collectible that I ended up selling off and never using.

Designed by acclaimed custom maker, Todd Rexford, this understated design is based off of his Singularity custom offering. The 801 is the second in a string of collaborations Todd has done with KAI (the previously reviewed Kershaw Injection being the first). This is his first high end collaboration with Zero Tolerance.

General Dimensions and Blade Details

The 0801 has an overall length of 8.2″, a 3.5″ blade, and weighs 5.85 ounces. The 0801 is a substantial knife and you will feel it in your pocket. It isn’t quite as chunky as the 0550, but it’s pretty darn close. No doubt that is due in part to the thick full titanium handle. I can’t think of any other production full titanium flippers on the market at the moment, so that is something to keep in mind. I like the fact that ZT has introduced a full TI handle into their lineup. Just understand that the 0801 ain’t no feather.

The blade on the 0801 is a spearpoint shape with a high flat grind. There is also a swedge that terminates well before the point to support the tip. The blade shape, like the rest of the knife, is pretty sober looking. But it certainly functions well in normal cutting tasks like breaking down cardboard boxes, doing light wood processing, and other general utility tasks. The blade is pretty thin behind the edge and the knife comes very sharp. It’s nice to see a high performance grind on this kind of knife, as the ZT/Hinderer collabs seem to favor strength over slicing.

The 0801 comes in Elmax steel. Elmax has become a staple in Zero Tolerance’s higher end line up. I have come to enjoy Elmax for its combination of good edge retention and relative ease of sharpening. I have had zero issues with rust or corrosion. I think Elmax is a good choice in this higher end offering.

Handle, Ergonomics, and Pocket Clip

The 0801’s full titanium handle slabs are separated by three black standoffs. This knife has been well executed. There are no visible machining marks, all the parts line up well, and everything has been nicely finished. The oversized decorative pivot is a nice detail, and the black hardware serves as the only contrast on the knife. The handle slabs themselves have been milled out with grooves and has a sort of sweeping faux bolster look. I am not wild and crazy about the grooves or the “ZERO TOLERANCE” brand engraved into the handle, but I have to admit Jim Skelton’s customized version with blue two-tone anodizing job really pops.

The 0801 works fine from an ergonomic standpoint. I wear a large glove and there is just enough room for a 4 finger grip – those with freakishly large hands may run out of real estate. There is something of a forward choil, so you can choke up and get a little more out of the handle if you need to, or lay back for more powerful cuts. There isn’t any jimping on this one, so you don’t have to worry about hot spots for your thumb, but I readily acknowledge that the absence of jimping may be a turn off for some. The rest of the handle feels good. This isn’t a funky handle shape so it should work well for most people.

The pocket clip on the 0801 is straight out of the KAI parts bin. A slightly smaller version of the clip can be found on the Cryo. Visually it’s not the most amazing clip, but it is very practical, especially if you are into deep carry. The 0801 buries into the pocket, but even if your co-workers won’t notice it, you certainly will. At near 6 ounces this is not a lightweight pocket knife. That’s the trade off when you go for a thick full titanium handle. It would be cool to see ZT pocket out the inside to lighten things up, but I know that is probably cost prohibitive. If you are into bigger, heavier knives this obviously won’t be an issue, but weight weenies need not apply.

Deployment and Lockup

As far as titanium framelock flippers go, the 0801 is up there with the best on the market. I’m not saying it’s as good as the freakishly fast 0454… it’s definitely nothing near that, but fans of snappy flippers should still be satisfied with this knife. The Elmax blade rides on KAI’s KVT captured bearing system, and you can see the guts of it peeking out by the lock face. I thin it is somewhat unseemly to have the bearing cage poke out like that, but I guess that is what needed to be done to make the knife work right. All said, fans of flippers will find a lot to like with the action of the 0801.

ZT incorporated a stainless steel lockbar insert into their frame lock, and the steel on steel contact makes for a secure and stick free engagement. I couldn’t detect any sort of blade play. The lock geometry of this knife has definitely been dialed in, and the blade centering is perfect. These details are important to find in this higher end knife.

Zero Tolerance 801 Review – Final Thoughts

There isn’t anything else out there filling the full titanium framelock flipper niche, so off the bat that puts the 0801 into a league of its own, unless of course you are willing to venture into custom, midtech, or aftermarket territory. The full titanium handle does have its potential drawbacks, mainly the weight, but there are plenty of people willing to forgo an ounce or two for full TI goodness.

Despite not having any direct competition, the 0801 doesn’t rest on its laurels. It is a very solid and well made knife. Build quality and materials are both excellent. The flipping action and lock up are superb. The design is austere and based off of Todd’s coveted custom offering. There is a lot to like here for fans of high end production knives and frame lock flippers. If you are interested in the 0801 I can safely recommend it.

Zero Tolerance 0801 Titanium Flipper Knife

Made in the USA; Manual open, KVT ball-bearing system
Frame lock; Reversible (left/right), deep-carry clip
Steel: ELMAX, stonewashed finish; Handle: Titanium
Blade Length: 3.5 Inch (8.9 cm); Closed Length: 4.7 Inch (11.9 cm)
Overall Length: 8.2 Inch (20.8 cm); Weight: 5.8 ounces (164.4 g)

I recommend purchasing the 0801 at Amazon or BladeHQ.

Spyderco Chaparral Review

by Dan Jackson 9 Comments

Last Updated: September 28, 2017
They say that a good way to measure the quality of a production knife is to take it apart and then put it back together. A high quality knife will come back together just as easily as it comes apart.

Buy the Spyderco Chaparral at BladeHQ

Buy on Amazon

I recently took apart my Spyderco Sage 1. I have sung praises about the Sage 1 for years now, even going so far as to call it the “perfect EDC knife”. Whether the knife is “perfect” or not is debatable, but I have really enjoyed the Sage and it has remained in my collection for years now. But the action of my Sage had gotten pretty stiff. It was obvious to me that the pivot had become caked with dirt and the knife could use a good cleaning. I popped the Sage apart, and spent a good 15 minutes cleaning and oiling all the pieces. The knife came back together without a hitch, and the blade fell dead center as I gave the pivot a final twist. The action is smoother than it ever was. This, my friends, is still an excellent knife.

Which leads me to today’s topic of conversation, the Spyderco Chaparral. It shares many similarities to my beloved Sage 1: The profile is near identical, both knives have faux carbon fiber scales and a wire pocket clip, and both made in Taichung Taiwan.

The biggest difference is the size. The Chapparal is about an inch shorter in overall length, but the blade is less than a quarter of an inch shorter. Of course you also have different steel and different locking mechanisms, but in many ways the Chapparal can be seen as sort of a mini Sage 1.

As I’ve matured I have grown to appreciate a smaller knife for my kind of EDC needs. Could the concept of the “perfect EDC” be a moving target? Could the Chaparral usurp my fabled Sage 1 as best and brightest?

General Dimensions and Blade Details

The Chaparral has an overall length of 6.375″, has a 2.812″ blade and weighs 2.5 ounces. Next to my Spyderco Sage 1, with its 3″ blade, the Chaparral is significantly smaller in every dimension. This knife is imminently pocketable and works just as well with jeans and a t-shirt or slacks and a tie. For those seeking a smaller pocket knife in the Spyderco lineup, but don’t want to go all the way down to a Dragonfly, the Chaparral fills the niche. Having owned both the Sage 1 and this Chaparral I personally prefer the size of Chaparral for office use.

The blade is a classic Spyderco leaf shape, complete with full flat grind. This blade shape has proven itself to me many times over, but what I especially like about the Chaparral’s blade is the 2mm thick blade. This is a relatively thin piece of stock that has been ground even thinner. This is a very slicey knife, and I really like that. This wouldn’t be my first choice to pry open an ammo crate, but its a great choice for cutting stuff. Especially stuff that you come across in the general suburban EDC context.

Spyderco selected Carpenter CTS-XHP stainless steel for the blade material. I have had some experience with CTS-XHP with my Spyderco Domino which oddly enough was the last Spyderco knife I have reviewed. This is a nice steel and I am glad Spyderco is rolling it out on more products. It has good edge retention, and decent corrosion resistance, but it’s surprisingly easy to sharpen and takes a very fine edge. Apparently these originally come in S30V, which is what my Sage 1 is equipped with. The S30V on my Sage 1 can be a little stubborn to get super sharp, so I think the upgrade to CTS-XHP was a smart one.

Handle, Ergonomics and Pocket Clip

The handle of the Chaparral is faux carbon fiber over full stainless steel liners. The carbon fiber has a quilted feel, providing just enough texture. The liners have been skelotonized to keep the weight down. Fit and finish of the handle is very tight, like all of the other Taichung Taiwan Spydercos that I have examined, with crisp lines, a flush backspacer, and polished steel. I like how Spyderco has only 2 exterior bolts showing; one at the pivot and the other securing the pocket clip (and rest of the handle) together. Underneath the scale there a couple hidden screws and even an internal stop pin – interesting construction for a lockback knife.

Spyderco also offers the Chaparral in a couple titanium handled variants. These retail for $200 and $300. Personally I purchased the Chapparal as a user, and had no problem with faux carbon fiber, but I want to acknowledge the fact that other more expensive versions of the knife do exist.

In hand the Chaparral feels like a Spyderco. The handle is unassuming yet receptive. The “50/50″ choil accepts the forefinger without issue and affords a very comfortable grip for an under 3” blade. The jimping on the spine grabs the skin of your thumb without irritating it. Spyderco has made a name for themselves designing “little big knives” so I am not surprised that the ergos are on point. Frankly, Spyderco probably considers the Chaparral a medium size knife in their lineup. There is plenty of room here to get work done and the ergonomics of the Chaparral are as thoughtful and refined as you would expect from any other knife designed by Sal Glesser.

Spyderco went with their wire clip for the Chaparral – the same clip found on the good ole Sage 1. This is a proven clip design. I noticed the clip on my Sage 1 loosen over time. I thought that was the metal losing its spring tension for some reason, but it turns out that all I needed to do was tighten down the pocket clip screw. This clip is discrete and it buries the Chaparral deeply. I can get away with clipping this knife to a pair of dark slacks if I want to and most people wouldn’t give the clip a second thought. Spyderco set this knife up to accommodate ambidextrous tip up carry, and I think that is a nice compromise between form and function.

Deployment and Lockup

It should come as no surprise that the Chaparral features a thumb hole. It is sharp and catches the thumb easily. The spring on the lockback is sturdy, and the action is smooth, although if I put any lateral pressure on the blade when opening I detect a faint grinding sound near the pivot. There are very thin phosphor bronze washers inside that can’t be seen unless you take the knife apart.

Lockup on the Chaparral is very sturdy. As I mentioned before, there is an internal stop pin that prevents the up and down flex you often get with lockbacks. This is similar in concept to the tri-ad lock Cold Steel uses, and it makes for a very solid lockup. The lockbar is a little sharp and the spring is strong, so this is not a knife you will idly open and close for hours on end, but it works well and is satisfying to open and close.

Spyderco Chaparral Review – Final Thoughts

I think the Chaparral is a great little knife. I may be a bit biased because I enjoy my Sage 1 so much, but the Chaparral seems to tick a lot of boxes for me. Small, slim, well made and carefully designed, the Chaparral is a sleeper EDC knife that straddles the gap between Dragonfly and Spyderco’s 3″ bladed offerings (of which there are several). I can’t find much to fault with this one; certainly not the performance. It’s an excellent cutter and vanishes in the pocket. It’s nice that the knife is fully ambidextrous as well.

Is it “better” than my Sage 1? Is it the “perfect EDC knife”? It could be, depending on who you are and what your preferences are. I will always have a soft spot for my Sage 1. Now that I cleaned it out the knife is just uber smooth, and the blade pretty much falls shut on its own after releasing the liner lock. For my needs the Chaparral is plenty of knife, but I love the smooth action of the Sage and the convenience of a liner lock. Both are worthy buys, and I don’t think the Sage 1 is ever leaving my collection.

If you are interested in the Chaparral or are looking for a small “do it all” EDC knife that doesn’t sacrifice blade steel or ergonomics then I recommend it.

Spyderco Chaparral Prestige Folding Utility Pocket Knife with 2.80" CTS XHP Stainless Steel Blade and Black Carbon Fiber Laminate Handle - PlainEdge - EDC Gear - C152CFP

Superior Blade Material: Crafted with a 2.80-inch CTS XHP stainless steel blade, renowned for its exceptional edge retention and corrosion resistance, ideal for a variety of cutting tasks.
Elegant and Functional Design: Features a black carbon fiber laminate handle, providing a sophisticated look while ensuring durability and comfortable handling.
Precision Cutting Performance: Blade is full-flat ground with a plain edge, offering optimal cutting performance and non-skid jimping on spine and choil for enhanced control.
Compact and Lightweight: With an overall length of 6.38 inches when open, and a weight of just 2.50 oz, this knife is designed for easy everyday carry and use.
Versatile and User-Friendly: Accommodates both right and left-handed users, making it a practical choice for a wide range of individuals.

I recommend buying the Chaparral at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Fantoni CUT Flipper Review

by Dan Jackson Leave a Comment

Last Updated: August 30, 2019
We are in the midst of another Italian Renaissance. This time around it’s not a blossoming of politics and art, but of steel and titanium. The Italians are making some absolutely beautiful knives, and I can think of few examples that typify this as much as as the Fantoni CUT Flipper. At its core the CUT Flipper is a meat and potatoes knife. It is sturdy and well made, unpretentious, and intended for real use. Yet this knife has been elevated. The elegant design coupled with a fanatical attention to detail lifts the CUT Flipper from object to art.

Buy the CUT Flipper at KnifeArt

The CUT Flipper has been on my radar for several years. Carried by boutique purveyors and retailing for around $400.00, the CUT Flipper has eluded my grasp for some time. This is a collaboration between Fantoni and Dmitry Sinkevich, the same designer who brought us such things as the Zero Tolerance 0454 and many Shirogorov designs. The problem with the ZT 0454 and Shirogorov flippers is that you can hardly find them, let alone find them for a reasonable price. The CUT Flipper, while no means widely circulated, can still be found at retail (at least at the time of this article and for the past few years – Fantoni has never been known for high production volume). That places the CUT Flipper at a unique spot in the marketplace, and practically begs for a closer examination.

General Dimensions and Blade Details

The CUT Flipper has an overall length of 3.5″, has a 8.375″ blade, and weighs 5.3 ounces. This a larger knife meant for work. Some might call it a tactical knife. It’s obviously too big of a knife to carry around in an office setting, but it works fine with jeans and could certainly be an EDC item if you like carrying larger knives. There isn’t anything wrong with viewing this as a collectible either.

The blade shape of the CUT Flipper is an upswept modified drop point. I really love this blade shape, and I think it is part of the reason why I gave the Kershaw Turbulence such high marks. You have a high flat grind, swedge, and a neatly applied edge. The finish on this knife is very nice. It’s a high polish with a stonewash over it (or maybe a stonewash that was then high polished – hard to tell really). Regardless the blade has a deep luster that looks great and hides wear. It’s also a low friction finish, and it helps the blade slide through material.

Fantoni went with tried and true CPM S30V for their blade material. I have no complaints with the steel selection. I’ve had some issues with S30V in the past, but done right S30V is a proven steel. Here Fantoni has heat treated the blade to 60-61 HRc, and the knife takes a nice working edge that touches up easily on a strop or my ceramic rods. The CUT Flipper isn’t super thin behind the edge, but it thins out enough to be a capable slicer. It’s a good compromise between strength and agility. The upswept tip is strong, but the steep angle means that it isn’t my first choice for clipping coupons or other fine tip work. All in all, the blade lives up to its namesake, and it performs if you are looking to put the CUT Flipper to work.

As an aside, I know that Renzo Fantoni, the founder of Fantoni Knives, is a big fan of super steels. Don’t be surprised if Fantoni ends up producing a limited run these in S125V or some other insane steel.

Handle, Ergonomics and Pocket Clip

The handle of the CUT Flipper has a lot of really nice details – there is lot for a collector to admire here. 3-D machined slabs of G10 rest atop thick cut pieces of sandblasted titanium. All of the edges have been painstakingly radiused. At the end of the day construction appears simple, but that is only because they have pulled it off so flawlessly. I love the oversized hardware and how the backspacer was finished and slots around a lanyard pin. I’ll try to do my best with the pictures, but you really need to examine one of these in person to get a true feel for the workmanship.

In hand the CUT Flipper feels fantastic. It’s a larger knife and the handle is pretty thick, so those two factors add to this, but the slight pistol grip to the handle shape leave great spots for your palm and thumb. There is a a run of mild jimping that looks nice and serves its purpose, while the rest of the knife is devoid of aggressive texture. This knife feels natural in the hand and I had no problem breaking down boxes and carving up 2x2s with this.

The pocket clip is a simple bent titanium clip, and is given the same sandblast as the liners and laser engraved with Fantoni’s subdued logo. This is a small detail, but I like the choice of domed pocket clip screws – even they seem to be of very high quality. It is a sturdy clip that holds the knife steady, and reasonably low in the pocket. The handle is tapped for ambidextrous tip up carry, a nice nod to this knife’s utilitarian roots. At 5.3 ounces, the CUT Flipper is definitely something that you will notice in your pocket, but I don’t think the weight or the way the CUT carries is unreasonable given the size and construction of the knife.

Deployment and Lockup

The CUT Flipper is obviously a flipper style knife. If you prefer a non-flipper variant, check out the aptly named CUT. The flipping action on this knife is not something to write home about. You need to pushbutton (preload) the flipper to ensure a speedy and complete deployment, and that is a mild let down for such an otherwise fantastic knife. Still, the CUT Flipper is quite smooth and I still enjoy opening and closing it ceaselessly, periodically pausing to admire the blade or the gentle play of titanium and G10.

The CUT Flipper is a liner lock. The generous titanium liner engages fully and the blade locks up solidly and without play. It looks like Fantoni may have heat treated or carbidized the lock face, as there is slight discoloration in the last quarter inch of the liner lock – right where it meets with the tang of the blade. Performance of the liner lock is excellent and the blade centering is dead center.

Here is a shot of the CUT Flipper next to my Strider SnG:

Fantoni CUT Flipper Review – Final Thoughts

I can think of few folding tactical knives that have that holy trinity of form, function, and uber tight finish work. Some may argue that the “holy trinity” is just that: the Chris Reeve Sebenza, the Strider SnG, and the Rick Hinderer XM-18. Having owned two out of the three and handled several XM-18’s, I think the CUT Flipper belongs right next to these standard bearer blades. The CUT Flipper may not have the track record (or the marketing effort) of these other knives, but it certainly has the design chops, build quality, and functionality of these other knives.

This is a knife I have been drooling over for some time. Sometimes when that is the case I get a little underwhelmed when the actual knife arrives. Not so with the CUT Flipper. I think I actually like the knife more now that I have it. The CUT Flipper hangs with the best of them and has earned my wholehearted approval and recommendation. If you are at all on the fence about this knife, my suggestion would be to buy it with confidence. You will not be disappointed.

I would recommend buying the CUT Flipper at KnifeArt, as they are Fantoni’s only US dealer. However, their stock is limited.

I would also recommend purchasing the CUT Flipper at Amazon or BladeHQ, however, neither retailer seems to carry Fantoni Knives. Regardless, please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. Thank you very much.

LionSteel TM1 Review

by Dan Jackson 12 Comments

Last Updated: August 3, 2019
I hope the regular readers are interested in high end knives, because the next few posts are all going to be doozies. The TM-1 is so mythical a knife, that it isn’t even out yet, although LionSteel tells me that they will be introducing it to market any day now. I was fortunate enough to snag one of the pre-release samples on display at the 2014 Blade Show.

Buy the LionSteel TM1 at BladeHQ

Buy on Amazon

As a lover of knives, I had an extremely tough time putting down the TM-1 LionSteel had on display at their booth. As a lover of deals, I couldn’t resist asking whether they would be willing to part ways with one for purposes of review. Gianni, co-owner and CEO of LionSteel, was kind enough to oblige me. That said, I do need to make clear that this knife was one of the 4 or 5 display pieces sitting at the Blade Show booth, and it has been handled by hundreds of people over that weekend. As such it has a few scuffs and carry marks, and I of course have been carrying and using it myself as well.

The TM1 is another knife in LionSteel’s SOLID® line, which means that the handle has been milled out of a single block of material. In the past titanium has been LionSteel’s handle material of choice, and I examined my titanium-handled SR-1 not too long ago. This time around LionSteel has decided to use either carbon fiber or micarta. Being the material girl that I am, I of course opted for carbon fiber. The carbon fiber is handsome and makes the knife much lighter than my SR-1 (which is about the same size).

Perhaps even more interesting than the material selection is the fact that this time around LionSteel wanted to make a monolithic handled knife with a back lock and IKBS bearings; two firsts for the company. I have been admiring the knife for almost a month now and I am still unsure as to how exactly they pulled that off. Regardless of what draws you to the TM1, there is something to admire. And I feel very fortunate to share some early thoughts on this brand new knife.

General Dimensions and Blade Details

The TM1 has an overall length of 8.07″, has a 3.54″ blade, and weighs 4.48 ounces. Much like when handling the Zero Tolerance 0454, another carbon fiber handled knife, one of my first remarks when picking up the TM1 was how light it felt. The knife feels deceptively light for its size, and is way lighter than a titanium handled counterpart. This is a largish EDC knife in my book. Not only is it a pretty long knife, it is thick and wide as well. That said, the TM1 was definitely built with use in mind. Construction is stout, the handle and blade are capable, and the light weight means that it is actually something that can be carried.

The TM1 has a unique reverse tanto blade. Reverse tantos are uncommon. Arguably the best known production knife to feature the reverse tanto blade shape is the Benchmade 940, which happens to be one of my favorite Benchmades. So the blade profile of the TM1 is different from most of the knives in my collection, and is a welcome divergence from all of my drop points. The reverse tanto not only looks unique, but it is quite practical too. You get all of the belly of a drop point with the fine tip of a tanto. LionSteel further enhanced the usability of this knife but giving it a full flat grind, which gets nice and thin behind the edge. This isn’t just a show piece, this is a practical tool.

LionSteel elected to equip the TM1 with a Sleipner stainless steel blade. This is my first real experience with Sliepner, and it has been fun to put this knife through its paces. I am not particularly interested in the chemistry of the steel, but here is a link to the data sheet so you can check all of that information out.

In practice I found Sliepner to perform well for daily carry tasks. Like I mentioned in the intro, this was something of a scratch and dent model, so I had no problem with beating on this knife a little (the first scratch is always the hardest). I worked with cardboard, wood, paper, and plastic, and the knife never had a problem. When the edge did start to slow down it quickly came back after stropping. My final thoughts on Sliepner are still in the works, but so far this steel seems very promising. No issues with rust or corrosion either.

My knife did come with a black blade coating. I am pretty sure it is a black oxide blade coating, and it has held up really well under use. Granted I haven’t use this knife to open up a can of Chef Boyardee, but so far there is no scratching or visible signs of wear.

Handle, Ergonomics, and Pocket Clip

Obviously handle construction the reason to buy this knife. Milled from a solid block of micarta or carbon fiber (shown here) handle construction is impressive, to say the least. Every corner has been masterfully chamfered (in some cases it has been so decoratively), and the handle is contoured for comfort and style. The end result is beautiful and displays the carbon fiber weave in a number of different facets. The workmanship is flawless; all the lines are crisp and clean. My satisfaction with the execution of the carbon fiber handle cannot be overstated.

The TM1 feels at home in my hand. It’s a stout knife, with plenty of handle and an abrupt finger choil. The body of the handle gently swells to fill the palm, and the absence of jimping is not a problem for me. Despite the apparent lack of a dedicated “traction plan” the knife magically manages to remain in my grasp. This is a comfortable and fully functional handle.

The TM1 features an ambidextrous deep carry pocket clip. This is the same clip found on the SR-1. Mine has been given the same black oxide coating as the blade (so far no wear), and is held in place with a carbide glass breaker. SR-1 owners will attest that this is a very nice pocket clip. It is discrete and holds the knife very securely in your pocket. The fact that it is mounted on the butt of the handle is very elegant. There are no extra holes in the handle of the knife and I love the simplicity and practicality of this clip design.

For a larger and bulkier knife the TM1 does carry well, in part because it has a well implemented and secure pocket clip, and in part because it is so lightweight for its size. This is definitely a knife that can be carried.

Deployment and Lockup

The TM1 makes use of a thumb disk to open the blade. This is probably my least favorite aspect of the knife. It works fine for slow and purposeful openings, but I have found it impossible to flick open. I guess at the end of the day that is perfectly acceptable, but this is a knife I would love to flick open given the IKBS bearing system and the massively satisfying “thwack” sound the knife makes upon deployment. It makes almost a chirping noise, kind of like the Sage 1, which also happens to feature carbon fiber. My guess is that they opted for the thumb disk so that they wouldn’t spoil the lines, and I suppose that is a worthy compromise.

My knife locks up without even a hint of bladeplay. Again, the sound this knife makes upon locking up is very unique, and very satisfying. Upon disengagement of the lock bar the blade falls about halfway closed, where it can then be shaken completely shut. I have never handled a lockback that smooth before. No doubt this is due in part to the use of an IKBS bearing system, and LionSteel definitely deserves some kudos for this. The large decorative pivot is very smooth, and the action is a lot of fun. I still have no idea how they got all of those bearings into this thing.

It is worth noting that my blade is perfectly centered.

LionSteel TM1 Review – Final Thoughts

The TM1 is the third addition to their integral line, and I think it is my favorite. I say that because in my opinion this knife is meant to be used; a vibe I don’t really get from my TiSpine or my SR1. LionSteel has managed to elevate the humble back lock to a drool worthy, collector status knife yet they have also kept it durable and functional. The lightweight handle makes this a knife that I actually want to pocket and use, while the TiSpine and SR-1 are knives that I want to enjoy while sitting on my couch. Plus, titanium scratches easily, and this carbon fiber really hides wear well. Same with the black oxide coated blade.

I think LionSteel is really doing some exciting things. While other manufacturers seem to be caught in something of a creative rut, LionSteel’s creativity and willingness to push the envelope further elevates themselves as serious contenders in the US production knife marketplace. And I don’t think I am the only one to notice this. LionSteel won the 2014 Blade Show manufacturer of the year award, and their HiJinx collaboration with CRKT and Ken Onion netted them a 2014 knife of the year award as well. As I look towards their next move, I can’t help but wonder if we will see some of this technology filter down into some budget minded products. I doubt we will see a 4-axis machined carbon fiber handled knife retail for under $200.00, but if there is one thing I have learned about LionSteel, it is to expect the unexpected.

Given the premium price tag, this knife won’t wind up in everyone’s collection, but I definitely recommend it if the TM1 is one that you want to buy. This is an amazing knife and I am very impressed by it.

Lionsteel TM1 – From $400.00
From: BladeHQ

Lionsteel TM1 Micarta, Knife TM1 MB

MADE IN ITALY by LionSteel, one of the world's premier knife manufacturers
KNIFE HANDLE is precision machined from a solid block of Micarta for extra sturdiness and strength
BLADE is made from Sleipner steel, a chromium/molybdenum/vanadium alloy which is a variant of D2 steel
INCLUDES tungsten carbide glass breaker and an ambidextrous pocket clip
DIMENSIONS: Blade Length 3.54", Blade Thickness: 0.18", Total Weight: 3.5 oz.

I recommend purchasing the SR-1 at BladeHQ or Amazon./i>

Zero Tolerance 0454 Review

by Dan Jackson 12 Comments

Last Updated: July 27, 2018
Every so often as a knife collector I have had my expectations taken up a notch. For purposes of this introduction I’ll call them “game changing blades.” Making the jump from a $25 knife to a $65 knife was one such moment – my move from a CRKT M16 to a Benchmade Griptilian opened my eyes to what nice knives were all about. Climbing up the ladder further I have experienced the incremental improvements that often come with expending increasingly more money on a knife.

The jump to a CRK Sebenza was one such revelation. And I have to consider the Zero Tolerance 0560 and the Lionsteel SR-1 as game changers in their own right as well. Maybe these weren’t leaps directly correlated to the price of the knife, but each blade brought it’s unique strengths in quality of construction, innovation, and design. I have appreciated the experience as a collector and that is a huge part of the reason why I continue to spend time working on this website.

Well the 0454 is another game changer – in so many ways that I hardly know where to begin. Designed by Belarusian knifemaker Dmitry Sinkevitch the Zero Tolerance 454 may be the sexiest blade to cross my path yet. This knife has not yet been released to the public and was named the Blade Show 2013 knife of the year. I was extremely fortunate to be one of the lucky 10 individuals selected at random at the 2014 Blade show for the opportunity to buy this knife.

I remember winning the 454 like it was yesterday, because it actually was only a few weeks ago. I had entered this lotto among many others on offer at the Blade show. In addition to the 0454 I was hoping for the chance to score a Brad Southard, Michael Burch, or perhaps even a Hinderer XM-18 at a reasonable price. Most of the time these lottos don’t pan out, but you have to be in it to win it. So I could barely believe my ears when my name and number were called by Kershaw Jen for the 0454 lotto.

My first thought after parting ways with $500 and tucking the 454 into my backpack was, “I hope I don’t get stabbed in the parking lot over this thing” because I knew that the fabled 888 has sold for as much as $3,000 at auction. Thankfully I made it out of the parking lot and all the way back home to Florida with only a scrape, and I feel incredibly fortunate to bring you this review.

Let me start by disclaiming that I have not carried this knife nor have I actually used it to cut anything. I will in all likelihood keep it as a collectible as it’s an incredible knife and very rare. I will be examining it as critically as I can, but take this “review” with a big grain of salt…

General Dimensions and Blade Details

The 454 has an overall length of 9.385″, sports a 4.1″ blade, and weighs a mere 4.1 ounces. This is the cutlery equivalent of a supermodel, with biologically improbable dimensions and curves that make the jaw drop and eyes glaze over. The knife feels like a feather in hand, and they have crammed a ton of blade into this slender profile.

The 454 has a modified drop point blade. There is something about Dmitry Sinkevich’s designs that really speak to me. Whether it’s his collaborations with Shirogorov, Fantoni, or this one with ZT, I am really enjoying the hard lines and athletic curves of his designs. The this is a long narrow blade, and it fits well with the long narrow handle. It has a high flat grind and a long swedge. The tip is very fine but it feels like there is still some meat behind it. If I actually cut anything with it I’ll let you know how it performs but I can say it came shaving sharp and I’ve already managed to cut myself twice with this long blade.

One of the proudest features of the 454 is its composite steel blade. The dark sections are CPM D2 while the silver middle section is 12C28N. The pieces have been braised together with copper. It isn’t clear what they have managed to heat treat this knife to, although I know that ZT has struggled to properly manufacture and heat treat some of these fancy composite blades in the past. I have plenty of knives that I can cram into my pocket and cut with, so I don’t feel the need to do that with this very rare knife. Some people feel the need to carry and use every knife in their collection – even expensive custom pieces. I have my users and and I have my collector pieces, and the 454 is firmly in the collectible category. I won’t make any qualms about that.

Handle, Ergonomics, and Pocket Clip

Every piece of the 0454’s handle has been 3-D machined. ZT started with two slabs of carbon fiber, sandwiched them between a titanium backspacer, and went to town with them. The finishing work is immaculate and the carbon fiber handle makes the knife feel exceptionally light for its size. Even the lanyard hole has been elegantly rendered. Everything is just super nice.

The 454 is a long knife, so it should come as no surprise that there is plenty of room for your hand. The curves of the handle fit my fingers naturally and the 3-D machined carbon fiber fills the hand. There is a row of mild jimping on the thumb ramp. It does a great job indexing and holding the thumb in place without being overly sharp or irritating. I haven’t used this knife hard, but I think this will be a comfortable knife to use.

The pocket clip is an elegant piece of 3-d machined titanium, and looks like something out of the Shirogorov catalog. Jim Skelton has told us that any knife over $700 should have a 3-d machined pocket clip. My only experience with these kinds of clips has been with my Mnandi (a knife I have really grown to enjoy), and I am very happy to see this clip on the 454. It elevates it and makes it even more unique. I’ve never used this pocket clip, but the spring is very strong and is positioned for deep right side tip up carry. I’m glad they didn’t go ahead and drill a bunch of holes in this piece. As Thomas W can attest to, pocket clips can be tough to get right, but I wouldn’t change a thing with this one.

Deployment and Lockup

I have publicly commented that I think that people that wax poetic for extended lengths about how well their knives flip are blowhards. I made sure to skip lunch before writing this review because I am about to eat my own words. Deploying the 454 is like deploying a surface to air missile. The detent is strong and the blade explodes open, without fail, every single time. By far it is the most robust flipper in my collection. Zero Tolerance installed their KVT bearing system and the blade rotates around a large decorative pivot. The action is smooth. Fall closed with the force of gravity smooth. I will say that the flipper tab can be tough to use some time. The combination of uber strong detent and total lack of jimping on the tab means that my finger has slipped off the trigger on more than one occasion when trying to flip open the knife.

ZT installed a sub frame lock on the 454. This is the same technology used in their higher production products, like the recently reviewed Kershaw Knockout, and I think it is cool to see that translate up and down their product line. This time around they upped the ante by 3-D machining the sub frame lock out of titanium, and then installing a stainless steel lock insert that doubles as a hidden over-travel stop mechanism. Lockup is early and secure, and blade centering is perfect. One thing I noticed on my 0454 is that the oversized pivot screws on my knife did not come with locktite. After only a couple flips they began backing out. I could cinch them back down with the meat of my thumb, but after a couple days I noticed a slight rattle with the handle. After torquing down the pivot with a driver I was able to fix the problem and remove the rattle entirely.

Zero Tolerance 0454 Review – Final Thoughts

I don’t think anyone will be surprised when I say that the 0454 is one hell of an awesome knife. As a collector and enthusiast of high end production pieces I am extremely impressed by the 454. The beautiful design, high end materials, advanced manufacturing, and impeccable fit and finish all make this well worth the $500 asking price to me. The 0454 is yet another showcase of Zero Tolerance’s talent and we can only hope that the sweet stuff found in these high end limited production knives continue to trickle down to ZT’s mass market products.

Buy one without regret if you have the funds and the opportunity, but don’t wait long – I see no reason why the 0454 won’t be as coveted and collected as the triple seven or 888.

Sale

Zero Tolerance (0450); With 3.25” DLC-Coated S35VN Stainless Steel Blade, All-Black Carbon Fiber and Titanium Handle Scales, KVT Ball-Bearing Opening, Frame Lock Reversible Pocketclip; 2.45 OZ., Silver, Small

Titanium frame lock houses hardened steel lockbar; frame lock secures blade in position so it does not close accidentally
Flipper works for left- and right-handed users; assists blade’s manual release with one-handed convenience
Finger guard, jimping and choil protect fingers during rigorous use while slicing, cutting, chopping, scaling, slashing, piercing or digging in any environment, in any conditions
Drop-point tip provides extra strength and chip resistance and eliminates pitch momentum
Overall length: 7.4 inches; closed length: 4.1 inches; blade thickness: 0.121 inches; weight: 2.9 ounces

$185.09
Buy on Amazon

These currently aren’t for sale, although I guess you could always lust over them at BladeHQ or pick up a ZT452 at Amazon to try and scratch that itch. As always, buying anything through the links on this site helps support BladeReviews.com, and I greatly appreciate it. Thank you so much for all of your support.

Boker Plus 01BO188 Titan Drop Review

by Dan Jackson 6 Comments

Last Updated: August 11, 2019
Have you ever bought a knife while drinking? I’m not sure if this is a common thing or not, but I was putting back a few beers one night while recording yet another morally suspect episode of GearGeeksLive when I decided to pick up this Boker Titan.

Buy the Boker Plus Titan Drop Point at BladeHQ

Buy on Amazon

It’s a pretty basic knife, but the price is right and I have been wanting to check it out for a while. Apparently I needed a couple IPAs to get properly motivated. I guess there are worse things you can do after having a few beers…

General Dimensions and Blade Details

The Titan has an overall length of 8.25″, a 3.75″ blade, weighs 4.10 ounces, and is made in China. The first thing I noticed when I pulled this out of it’s box was how big it was. I guess I would have realized that if I considered the specifications in between swigs of beer and trying to top Andrew’s non sequiturs, but sometimes these details get lost in the ether. It is definitely too large to be a daily carry for me, but it’s nice and slim and could make a good EDC for some people or perhaps even a “tactical knife”. I’d say it compares favorably to a Spyderco Endura, and it’s a bit smaller than my large Sebenza. I’d love to see Boker make a version with a 3″ blade for EDC, but I don’t want every knife in my collection to be a 3″ EDC knife.

The blade shape is a classic drop point with a full flat grind and satin finish. The blade has been well ground and the 440-C blade steel came sharp enough to brush the hairs off my arm without much thought. In practice this is a really nice cutter. The edge has been neatly and uniformly ground, and in practice I have found that the Titan is excellent for your typical tasks like breaking down boxes, working in the yard, home projects, etc. The full flat grind is nice and lean and it’s almost surprising how much extra leverage you can generate with the longer handle and blade.

Although it’s not a substitute for a real kitchen knife I did do a little food prep with it and was pleased with the results there as well. The tip is also very fine, and is great for stabbing through stuff. I managed to jab myself in the pinky while pruning some tomato plants, and the fruit was not the only thing that ran red that day.

The 440C blade has been easy to maintain and edge retention is pretty good. 440C is a softer steel, and I’d place it around AUS8 or slightly better in the edge retention department. Like AUS 8 it sharpens easily, and all I need is a strop to keep this knife very sharp. The satin finished blade attracts finger prints, but so far it hasn’t attracted any rust. All said I am pleased with the performance, especially given the price.

Handle, Ergonomics, and Pocket Clip

The handle is comprised of two slabs of titanium, a steel lock back, and a titanium backspacer. Everything is screwed together with matte stainless steel hardware. The dull gray titanium contrasts nicely with the satin finished blade and clip. Everything lines up neatly and is well finished. Boker’s Plus line often gets a bad rap for poor fit and finish, but the build quality here is very high. There is a simple elegance to the knife that draws me in. The full metal construction means that the knife is solid and sturdy, yet it is still slim pocketable. You still get some interest on the enthusiast level with the use of titanium, and it also helps keep the weight down quite a bit. It’s a great blend of form and function.

Being that this is a larger knife, it goes without saying that the handle is quite generous. I’m able to get my meat hooks onto it with plenty of room to spare, and this is a knife that is built to get work done.

Although this doesn’t speak directly to ergonomics in use, I will say that there are some sharper edges on this knife (namely the spine and lock bar) and if you are going to obsessively open and close the knife, you may develop some lingering discomfort on your thumb. This isn’t uncommon for a lock back knife, but I did want to mention this a potential negative as this review is largely very positive.

The pocket clip is very similar to what you might find on a standard Emerson or Benchmade clip. This is a proven pocket clip design. Much like its Benchmade or Emerson counterpart, it’s very secure and is easy to use. This one from Boker has been given a very bright satin finish. It isn’t particularly discrete, but it matches the satin blade nicely. The handle is tapped for ambidextrous tip up carry and it’s a relatively deep carrying knife. This is a very thin knife and despite being over 8″ long it carries very well. Again, I can’t help but compare this to an Endura, and in this case I think that is a good thing.

Deployment and Lockup

It is impossible to see what kind of washers Boker used without taking the knife apart, but I can say that the action is very smooth. My guess is they have phosphor bronze washers in there. The teraced thumb studs are easy to get at, and the backspring can be overcome with the push of a thumb.

For lockup you have a sturdy backlock. There isn’t much to write about here beyond saying that the lock works well. It engages crisply and there is no play. The fact that the knife is completely made of metal would lead me to believe you could run this knife pretty hard if you wanted to. I haven’t tested it beyond normal daily tasks, but it could definitely be beaten on like the Cold Steel American Lawman, another favored lockback knife of mine. Blade centering on my model is excellent.

Boker Titan Review – Final Thoughts

I think I need to shop for knives while drinking more frequently because I stumbled across a winner here. The Titan is very basic and is an extremely conservative design, but it has been done right and the inclusion of titanium handle scales lends it a touch of class.

In practice I have found this to be a great beater / user knife. It cuts and carries well, and is very functional. Boker’s fit and finish can sometimes be a mixed bag, but it’s hard to screw up a simple lock back, and the fit and finish is actually very good here. The pieces line up perfectly, there is no blade play, the action is smooth and the lock engages crisply. This is actually a really nice knife and think it gives the Endura a good run for it’s money – especially when you consider how damn expensive the Endura has gotten, and the Endura’s proclivity for up and down blade play. Here the Titan is rock solid, and retails anywhere from $20 to $40+ less depending on what kind of Endura you are looking for. Granted this knife is made in China rather than Japan, doesn’t make use of nested liners, lacks a Spyderhole, etc, but you are still getting a ton of knife for your money and it is well made. The only real downside I could find is that the edges of the lock and spine are pretty sharp. While by no means uncomfortable to work with, it was something I noticed when obsessively opening and closing the Titan.

At less than $40 the Titan is a no brainer and it makes my list of recommended high value knives. It may also make my list for recommended tactical knives, but the longer I run this site the less I really understand what tactical knife even means.

Boker Plus 01BO188 Titan Drop Knife with 3-3/4 in. Straight Edge Blade, Steel

Durable and sharp 440C stainless steel blade
Bead blasted titanium handle
Reversible, polished pocket clip
Blade length: 3 3/4 inches. Overall length: 8 3/8 inches. Weight: 4.5 ounces.
Limited lifetime warranty

Buy on Amazon

I recommend buying the Titan at Amazon or BladeHQ. Thanks for reading.