Knives By Purpose

Boker Plus 01BO188 Titan Drop Review

Last Updated: August 11, 2019
Have you ever bought a knife while drinking? I’m not sure if this is a common thing or not, but I was putting back a few beers one night while recording yet another morally suspect episode of GearGeeksLive when I decided to pick up this Boker Titan.

Buy the Boker Plus Titan Drop Point at BladeHQ

Buy on Amazon

It’s a pretty basic knife, but the price is right and I have been wanting to check it out for a while. Apparently I needed a couple IPAs to get properly motivated. I guess there are worse things you can do after having a few beers…

General Dimensions and Blade Details

The Titan has an overall length of 8.25″, a 3.75″ blade, weighs 4.10 ounces, and is made in China. The first thing I noticed when I pulled this out of it’s box was how big it was. I guess I would have realized that if I considered the specifications in between swigs of beer and trying to top Andrew’s non sequiturs, but sometimes these details get lost in the ether. It is definitely too large to be a daily carry for me, but it’s nice and slim and could make a good EDC for some people or perhaps even a “tactical knife”. I’d say it compares favorably to a Spyderco Endura, and it’s a bit smaller than my large Sebenza. I’d love to see Boker make a version with a 3″ blade for EDC, but I don’t want every knife in my collection to be a 3″ EDC knife.

The blade shape is a classic drop point with a full flat grind and satin finish. The blade has been well ground and the 440-C blade steel came sharp enough to brush the hairs off my arm without much thought. In practice this is a really nice cutter. The edge has been neatly and uniformly ground, and in practice I have found that the Titan is excellent for your typical tasks like breaking down boxes, working in the yard, home projects, etc. The full flat grind is nice and lean and it’s almost surprising how much extra leverage you can generate with the longer handle and blade.

Although it’s not a substitute for a real kitchen knife I did do a little food prep with it and was pleased with the results there as well. The tip is also very fine, and is great for stabbing through stuff. I managed to jab myself in the pinky while pruning some tomato plants, and the fruit was not the only thing that ran red that day.

The 440C blade has been easy to maintain and edge retention is pretty good. 440C is a softer steel, and I’d place it around AUS8 or slightly better in the edge retention department. Like AUS 8 it sharpens easily, and all I need is a strop to keep this knife very sharp. The satin finished blade attracts finger prints, but so far it hasn’t attracted any rust. All said I am pleased with the performance, especially given the price.

Handle, Ergonomics, and Pocket Clip

The handle is comprised of two slabs of titanium, a steel lock back, and a titanium backspacer. Everything is screwed together with matte stainless steel hardware. The dull gray titanium contrasts nicely with the satin finished blade and clip. Everything lines up neatly and is well finished. Boker’s Plus line often gets a bad rap for poor fit and finish, but the build quality here is very high. There is a simple elegance to the knife that draws me in. The full metal construction means that the knife is solid and sturdy, yet it is still slim pocketable. You still get some interest on the enthusiast level with the use of titanium, and it also helps keep the weight down quite a bit. It’s a great blend of form and function.

Being that this is a larger knife, it goes without saying that the handle is quite generous. I’m able to get my meat hooks onto it with plenty of room to spare, and this is a knife that is built to get work done.

Although this doesn’t speak directly to ergonomics in use, I will say that there are some sharper edges on this knife (namely the spine and lock bar) and if you are going to obsessively open and close the knife, you may develop some lingering discomfort on your thumb. This isn’t uncommon for a lock back knife, but I did want to mention this a potential negative as this review is largely very positive.

The pocket clip is very similar to what you might find on a standard Emerson or Benchmade clip. This is a proven pocket clip design. Much like its Benchmade or Emerson counterpart, it’s very secure and is easy to use. This one from Boker has been given a very bright satin finish. It isn’t particularly discrete, but it matches the satin blade nicely. The handle is tapped for ambidextrous tip up carry and it’s a relatively deep carrying knife. This is a very thin knife and despite being over 8″ long it carries very well. Again, I can’t help but compare this to an Endura, and in this case I think that is a good thing.

Deployment and Lockup

It is impossible to see what kind of washers Boker used without taking the knife apart, but I can say that the action is very smooth. My guess is they have phosphor bronze washers in there. The teraced thumb studs are easy to get at, and the backspring can be overcome with the push of a thumb.

For lockup you have a sturdy backlock. There isn’t much to write about here beyond saying that the lock works well. It engages crisply and there is no play. The fact that the knife is completely made of metal would lead me to believe you could run this knife pretty hard if you wanted to. I haven’t tested it beyond normal daily tasks, but it could definitely be beaten on like the Cold Steel American Lawman, another favored lockback knife of mine. Blade centering on my model is excellent.

Boker Titan Review – Final Thoughts

I think I need to shop for knives while drinking more frequently because I stumbled across a winner here. The Titan is very basic and is an extremely conservative design, but it has been done right and the inclusion of titanium handle scales lends it a touch of class.

In practice I have found this to be a great beater / user knife. It cuts and carries well, and is very functional. Boker’s fit and finish can sometimes be a mixed bag, but it’s hard to screw up a simple lock back, and the fit and finish is actually very good here. The pieces line up perfectly, there is no blade play, the action is smooth and the lock engages crisply. This is actually a really nice knife and think it gives the Endura a good run for it’s money – especially when you consider how damn expensive the Endura has gotten, and the Endura’s proclivity for up and down blade play. Here the Titan is rock solid, and retails anywhere from $20 to $40+ less depending on what kind of Endura you are looking for. Granted this knife is made in China rather than Japan, doesn’t make use of nested liners, lacks a Spyderhole, etc, but you are still getting a ton of knife for your money and it is well made. The only real downside I could find is that the edges of the lock and spine are pretty sharp. While by no means uncomfortable to work with, it was something I noticed when obsessively opening and closing the Titan.

At less than $40 the Titan is a no brainer and it makes my list of recommended high value knives. It may also make my list for recommended tactical knives, but the longer I run this site the less I really understand what tactical knife even means.

Boker Plus 01BO188 Titan Drop Knife with 3-3/4 in. Straight Edge Blade, Steel

Durable and sharp 440C stainless steel blade
Bead blasted titanium handle
Reversible, polished pocket clip
Blade length: 3 3/4 inches. Overall length: 8 3/8 inches. Weight: 4.5 ounces.
Limited lifetime warranty

I recommend buying the Titan at Amazon or BladeHQ. Thanks for reading.

Lionsteel SR-1 Review

by Dan Jackson 14 Comments

Last Updated: July 28, 2019
A topic knife nuts love to ponder is the age old question of “is it worth it?” This question is probably as old as knife ownership is itself. I imagine that first cave man who showed off his fancy new blade hewn from obsidian rather than the typical rock was met with his fair share of detractors (I am not sure if they used the term “haters” back in 6000 BCE). Whether an expensive knife is “worth it” in comparison to its cheaper counterparts continues to amuse us to this day, and a great example of a knife that gets the brunt of that question is the Chris Reeve Sebenza.

Buy the Lionsteel SR-1 at BladeHQ

No products found.

It doesn’t take long into seeking out info on the Sebenza before you stumble across a forum post, YouTube video, or even the comments section of your favorite knife review website to see folks passionately argue the merits of Sebenza and its $400.00 price tag. Opinions run the gamut from the Sebenza not being worth $100, let alone $400, to being the holy grail of blades and easily justified at any cost. I don’t agree with either of those extremes, but I think there is plenty of room in the middle to make valid arguments for and against the “value” of the knife, so I try my best to stay out of it. (If you absolutely must know, personally, I own and enjoy several CRKs and have concluded that they are worth it to me to have in my collection. Part of how I justify the cost is that if some day I woke up and didn’t like the knife, I could sell it and recover 90% of my money. Anyhow, I digress…). My point with all of this is that a lot of people seem obsessed with value and getting more for their money. Especially when it comes to high end production knives.

Enter the Lionsteel SR-1. I’ve drooled over this knife ever since it made it’s debut in 2010 with its dramatic blade shape, imposing sculpted handle, and top shelf materials. I felt like this was a knife truly befitting of a king and the fact that a company called Lionsteel was making it made perfect sense. But what really did it for me was the fact that this is an “integral”. By that I mean the handle has been carved from a single chunk of glorious 6A14V titanium. Here we have a knife that has truly done something different from a construction perspective. There should be no doubt in anyone’s mind that certainly we are getting *something* more for our money with the SR-1. So with that out of the way I intend to explore the merits of this blade…

General Dimensions and Blade Details

The SR-1 has an overall length of 8.3″, has a 3.7″ blade, and weighs 6.8 ounces. This is a sizable knife. Definitely larger than my average EDC, and is not something I am really prepared to carry on any kind of a regular basis. I consider it a collectable more than anything, but it certainly has been made for carry and use, and I am sure plenty of people do carry theirs regularly. Lionsteel has recently offered a mini version of the SR-1, the SR-2, and that may be a better bet for my style of EDC. That said, there is nothing wrong with buying this knife purely for collectable purposes – especially if you opt for the sweet version with a damascus steel blade like I have. What you are looking at is the SR-1 in Chad Nichols raindrop damascus. I’m not a huge damascus guy, but I thought this one was pretty cool.

The blade shape on this knife is a typical drop point. What I always liked about this knife was the ridiculously wide blade and the deep belly. Not for any practical reasons, mostly because it looks impressive and is unlike anything else in my collection. Blade stock is generous at .18″/ 4.5mm thick. The spine is capped (rounded over) while the high flat grind terminates in a durable, but plenty capable, edge. This isn’t a particularly awesome slicer, but it will hold up under harder use and can certainly cut stuff.

Like I mentioned before, this particular knife comes in Chad Nichols damascus, but if you were to buy a regular one off the shelf it will likely come in either D2 (for the aluminum handled version) or Sleipner steel (for the titanium handled version). Sleipner is manufactured by Bohler Uddeholm and from the limited research I did it is supposed to share some similarities to D2, in that it is a tough tool steel, semi-stainless, and capable of being heat treated to a high hardness, but it is supposed to be more resistant to chipping. Bohler put together a handy data sheet for those looking for more technical information on the steel. Because I haven’t personally used it, I have no real comments on it at this time.

Handle, Ergonomics, and Pocket Clip

The handle of the SR-1 is what really steals the show. 3-D machined from a single block of titanium or aluminum (the SR-1A), this handle is as beautiful as it is technically impressive. A monolithic handle like this is commonly referred to as an “integral” these days, but there is nothing common about this handle. I’ve examined my fair share of high end knives, including custom pieces, but holy shit is this thing is cool. And the fit and finish on this handle is really nice too. The exterior has been given an attractive grooved pattern, while inside the handle has been cleanly excavated to accommodate the blade. Adding to the interest, Lionsteel offers the SR-1 anodized in a rainbow of different colors. Simply put, this handle is spectacular.

Adding to my love of the SR-1’s handle is how nice and comfy it is. Lionsteel did an excellent job softening all of the edges and the SR-1 just melts in place. Next to the actual handle construction, I was most impressed by how good this handle felt. It’s a large knife so there is plenty of room, and the chamfering they have done is just superb.

The pocket clips is another well-implemented and elegant feature of the knife. I have to hand it to the Italian’s, they really now how to design beautiful stuff (and I’m not just saying that because my last name ends in a vowel). The clip is a deep carry design mounted on the pommel. It is reversible with a single screw. In practice the SR-1 carries discretely and decently for its size. I like the look of the deep carry clip, and the fact that this design does not put a lot of unnecessary holes in the beautiful titanium frame.

Deployment and Lockup

The SR-1 takes advantage of a pair of ambidextrous thumb studs for deployment. They are mounted for easy access with the thumb, and the blade rides on teflon washers. I’m not a huge fan of teflon washers because they don’t deploy particularly fast, but they are still found in some high end knives and I guess I’ll just have to learn to deal with that. Deployment isn’t particularly fast and I was unable to ever flick the blade open with my thumb, but it’s smooth and purposeful, which is pretty much what I’ve grown to expect with teflon washers.

On the other hand, lockup on the SR-1 is nothing short of glorious. You have a thick titanium lock bar with a steel insert, and when the blade opens up the lock bar falls into place with a really satisfying snap. Engagement is early and extremely secure. The fact that the handle is cut from a single piece of titanium makes for a very rigid frame, and I didn’t even notice a suggestion of blade play. I will say that my blade is ever so slightly off center, and I was not able to tune that out with the supplied pivot tool. This is a slight let down, but I guess there are some limitations with the integral design.

I also need to briefly note the rotoblock (which is the big round thing in the middle of the lock bar cut out). Much like the DPx Hest 2.0 I reviewed a couple years ago, the SR-1 comes with Lionsteel’s rotoblock, which doubles as lockbar stabilizer (preventing you from over-extending the lock bar when disengaging it) and as a secondary locking mechanism. The way it works is that you torque it down to lock the knife open or closed. A common criticism with the rotoblock is that it can come loose and put you in a position where the knife accidentally gets locked open or closed. The rotoblock on my SR-1 is very stiff, so maybe Lionsteel has completely addressed that issue. Personally, I see the secondary locking mechanism as a novelty at best, and a nuisance at worst, but I do like having some sort of lock bar stabilizer.

One final aspect of the knife worth mentioning is the packaging. Each SR-1 comes nestled in its own wood display case. It’s a cool feature and I have yet to see a knife come packaged like this. I know the box is the least important thing about a knife, but when you are already paying $400.00, it’s cool to see that Lionsteel went the extra mile to do something besides your typical cardboard crate.

Lionsteel SR-1 Review – Final Thoughts

The SR-1 is a hell of a knife. I know it’s expensive, and that is part of the reason why it took me so long to acquire one, but it’s different, and generally very well done. And I guess if you really cared about the price you could go for the less expensive aluminum handled version, the SR-1A, which sells for less than $200.00. I ran into a couple minor issues (slow action with the teflon washers, a slightly off center blade), but by and large this is a masterpiece and a tremendous accomplishment for a production knife. In this day in age it’s easy to argue that a lot of high end production knives aren’t worth the premium in price because they aren’t much different from their cheaper counterparts, but here the SR-1 really does deliver something different. The mono-block handle is just super duper cool and everything else has been really well done.

It isn’t the most practical knife in my collection, but if you have the dough and the desire, I definitely recommend checking it out. Because I favor smaller sleeker knives for daily use I definitely see myself acquiring a TiSpine in the not so distant future. Hopefully it doesn’t take 4 years for me to pull the trigger on that one.

Lionsteel SR-1 – From $379.00
From: BladeHQ

No products found.

I recommend purchasing the SR-1 at BladeHQ or Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

CRKT Obake Review

by Dan Jackson 18 Comments

Long time readers know that I have always had a soft spot for pocketable fixed blade knives, and CRKT has proven on a number of occasions that they know how to make them. So the announcement of the Obake, a compact fixed blade collaboration with CRKT and custom knifemaker Lucas Burnley, definitely caught my attention.

Buy the CRKT Obake at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00I04SZMI” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

Lucas is best known for his Kwaiken Flipper, an elegant Japanese inspired design. CRKT’s decision to pick up Burnley’s fixed blade variant of the Kwaiken strikes me as a smart decision given the immense popularity of his Kwaiken series of knives.

The result is a mash-up of traditional and tactical that marries a classic Asian aesthetic with contemporary materials all wrapped up at a sub $40 price point.

General Dimensions and Blade Details

The Obake has an overall length of 7.63″, a 3.64″ blade, and weighs 2.4 ounces. While some of my other favorite CRKT fixies; the Minimalist and SPEW, are firmly in the EDC knife camp, I think that the Obake is more of a “tactical” (self defense geared) offering. This is due to the relatively large size of the knife and its shank-like construction. The full tang knife is ground from .13″ thick steel and has a thick grind emphasizing strength over slicing performance.

This isn’t a knife that I like to peel apples with, but it definitely could blow through one if you felt so inclined. While I consider this larger than an EDC knife, it is still slim and streamlined, and tucks away discretely in your waistband or pocket (more on that below).

The Obake sports a slender drop point blade. The tip is fine but it has enough meat behind it to work into wood and get some work done. The spine has been gently rounded which is a nice detail that CRKT has integrated into more and more of their offerings. Perhaps the most striking aspect of the blade is the aggressive acid-etched finish. When I took this knife to my monthly knife collector’s club meeting, I had a couple people ask me if the blade was made of damascus. Nope, it’s just good ole fashioned 8Cr14MoV given a deep acid etched finish.

8Cr14MoV is a budget friendly Chinese stainless steel. I like it for its ease of sharpening and toughness, and the price is tough to beat. Here the knife has been heat treated to between 56 and 58 HRc. It has held up well against the mild chores I have put the knife to; mostly cardboard and some food prep. The knife is not an incredible slicer due to the thick blade stock, narrow profile, mid height hollow grind, and textured blade finish, but you can certainly open mail and break down boxes with it if you need to. My guess is that the Obake is best suited in a self defense type role, which is a role that I know very little about. That said, it doesn’t take a PhD in material science to realize that this design can stab very efficiently. So if a stabbing implement is what you need the Obake could be a good option.

Handle and Ergonomics

One of my favorite parts about the Obake is how they approached the handle. In paying homage to the Japanese roots of the Obake’s design, Lucas Burnley originally offered the knife with a traditional wrapped handle over rayskin. CRKT followed suit with a cordwrap over a synthetic ray skin. I wasn’t sure what to expect from a sub $40 knife, but they actually did a really nice job with this. The cord wrap is tight and well done, and the rayskin looks pretty legit. I really don’t know how well this will hold up under hard use, but in my daily carry the handle has worn well and still looks pretty good. Then again I didn’t roll it around in the dirt or go scuba diving with it, but if you are reasonably careful with it I see no reason why it won’t hold up for a good long time. Underneath the wrap and ray skin is a full tang blade.

From an ergonomic standpoint, the handle is generous enough to support a full 4-finger grip and the knife is as comfortable as you would expect. The cord wrap provides a lot of traction and the simple design fills the hand and works in both forward and reverse grips. I’m no martial artist so I really have no idea how this would stack up compared to other offerings, but I found it comfortable.

Sheath

The sheath for the Obake is a nice low profile molded plastic sheath. The sheath is almost always the Achilles heel on a budget fixed blade, so I’m pleased to report that CRKT has done this one right. Retention is very firm. At first I really needed to jerk the knife out, and to this day it requires a strong pull to break the knife free from the sheath. CRKT has also offered several eye holes and slots for various mounting options.

Lucas Burnely has an interesting suggestion for carrying the Obake. He has designed the knife for in the waist band (IWB) carry. Lucas suggests that you secure the paracord lanyard to your belt, stuff the sheathed knife blade first into the waist band, and then when you need to use the knife, grab the handle and pull it hard away from your body. The blade will pop out of the sheath, and the sheath will stay tethered to your belt. I’m probably not doing a great job explaining this, but the idea is that you can quickly and safely access the knife without losing the sheath.

In practice I have found this method of carry to work well. I’ve been a fan of using a lanyard with a small fixed blade, attaching the lanyard to my belt, and carrying the knife in pocket, but the Obake is a little longer than say, the Folts Minimalist. The knife is slim and light and disappears on your belt line if you leave your shirt untucked.

CRKT does supply a 550 cord lanyard and skull lanyard bead. I’m not big on skulls (I guess I’m not that hard), but I am sure this will appeal to a number of folks, and must admit that a bead of some sort rounds out the package nicely.

CRKT Obake – Final Thoughts

For those seeking a slim “tactical” fixed blade knife, the Obake is well done and priced to sell. I think that the juxtaposition of modern and traditional combined with a high level of fit and finish lend it broad appeal. I also found the selection of materials and finishes very interesting. Although I am not a martial artist by any stretch of the imagination, this is still a fun knife to have in the collection and it is easy to carry. Mechanically speaking, the 8Cr13Mov steel is adequate and while the sheath is excellent. I really enjoy the details like the faux ray skin and rounded spine.

One other thing I find worth noting about the Obake is that there is nothing else like this on the market at this price. CRKT has been hitting their stride lately with some bold collaborations with hot makers. While some companies have seemed to stagnate over the past couple years, CRKT is gaining ground as they straddle the crossroads of high value and high design. That kind of approach doesn’t always pan out, but knives like this and the Swindle strike me as great examples of when this strategy really pays off.

This is is something of a specialized tool, so I won’t give it a blanket recommendation to anyone browsing the site, but if you are interested in the Obake I would definitely recommend it. It is a complete package at a sub $40 price point, and they are going to have a hard time keeping up with the demand.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00I04SZMI” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

CRKT Obake – From $37.95
From: BladeHQ

I recommend purchasing the Obake at BladeHQ or [easyazon-link asin=”B00I04SZMI” locale=”us”]Amazon[/easyazon-link]. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kershaw Injection 3.0 Review

by Dan Jackson 5 Comments

Last Updated: August 3, 2019
These days in the world of high value folding knives we have some pretty stiff competition. Old standbys like the Spyderco Tenacious and CKRT Drifter continue to be tough to beat while recent contenders like the ESEE Zancudo, Ontario Rat II, and CKRT Swindle are re-defining what is possible with a low budget folder.

Buy the Kershaw Injection at BladeHQ

Buy on Amazon

But when you are paying less than $40 a pop there is plenty of room for more, which is why my reinterest in budget blades has led me to the recently released Kershaw Injection.

Sporting a Todd Rexford design and lots of “custom” details, the Injection has the potential to be an all-star budget blade. But will it join the ranks of elite inexpensive folders or fade away into the shadows of obscurity? There is only one way to find out…

General Dimensions and Blade Details

The Injection 3.0 has an overall length of 7″, sports a 3″ blade, and weighs 3.30 ounces. This knife feels pretty heavy for a 3″ blade, but the Injection is still firmly in the EDC camp. For those appreciating a larger knife, Kershaw has thoughtfully decided to offer this model with a 3.5″ blade, aptly named the Injection 3.5. Everyone is a little different when it comes to their ideal EDC blade length, so I think that it is fantastic that Kershaw decided to offer this model in two sizes straight out of the gate.

The blade shape on the Injection is a very basic drop point. It may be a little boring, but it certainly works well with its fine tip and full flat grind. This is a very practical choice for EDC. One aspect that I don’t particularly like about this blade is the bead blasted finish. This inexpensive finish is prone to rusting and doesn’t look particularly good. I think it’s a misstep on a knife that is trying to appeal to the consumer based on it’s details, but I guess you can’t have it all at $30. Beyond the blade finish there is very little to gripe about.

The steel in this knife is 8Cr13MoV, a staple in low-end Chinese knives that I have spoken about ad nauseam. But don’t let my familiarity with the steel turn you off, I don’t mind 8Cr13MoV when the price is right. It compares well to AUS8 in that it won’t hold an edge forever, but it is durable and easy to sharpen. Despite being a stainless steel it can rust, and my particular knife did stain a little when I left it unattended on a shelf for a few weeks. You definitely want to keep an eye on this steel and apply a little oil if you are looking to maintain a totally rust free blade. All said, for a ~$30 folding knife it’s tough to beat 8Cr13MoV.

Handle, Ergonomics and Pocket Clip

The handle is where the Injection starts to get interesting. Taking center stage is the full G10 3-D machined handle scales. They feature a tasteful milled pattern and are subtly contoured. Intricately machined and 3-D sculpted handles are a feature often absent on $100 knives, let alone $30 ones, and this is the most impressive aspect of the knife. Further adding to the custom flair is the oversized decorative pivot and milled G10 backspacer with inset lanyard pin (rather than a lanyard hole). These are undeniably great details in a budget knife, and it elevates the Injection from beater blade to something much more interesting. The handle construction is also very solid. There are no gaps or cracks and all the pieces line up well. Underneath the G10 scales are solid stainless steel liners. It makes for a very solid knife, but it does add weight to the little Injection 3.0.

In hand the Injection 3.0 feels just a little short. Maybe that is because this is a very straight handle, which means that there is less surface area, but I found my fingers a little cramped. Granted I do take a large glove, so please keep that in mind. I will say that the basic handle shape makes the Injection easy to hold in a couple different positions and I didn’t notice any hot spots. Reverse grip is actually super nice with the angular shape of the pommel, but I can’t say I’ve actually used the Injection with a reverse grip yet. The entire knife is free of jimping which is fine for an EDC knife. This is a relatively thick knife and it fills the hand and has held up under harder use. If I were intending to use this knife for serious work I would opt for the larger version.

The pocket clip is simple, but it is also tasteful and well executed. The innocuous triangular clip is sure to appeal to a broad crowd, and it is positioned for decently deep tip up carry. The clip has a bead blast finish which further adds to the discrete look. The clip is swappable for left or right side carry, but fans of tip down carry are completely out of luck. Personally, this is not an issue.

Deployment and Lockup

For deployment you have dual decorative thumb studs. Despite the interesting milled details on the thumb studs, they are still very easy to access and quite practical. I had no problem flicking the blade open with the push of my thumb. Inside, there are metallic washers that appear to be phosphor bronze. This isn’t the smoothest knife I have handled, but if these are real phosphor bronze washers then the knife will only get smoother with time.

For lockup you have a sturdy stainless steel liner lock. My knife locks up 100%, but is free of any play. The liner lock is also easy to disengage and doesn’t stick. The full G10 scales and full stainless liners make for a robust knife that inspires confidence. Blade centering on my knife is favors the non-locking side, but it doesn’t rub and is acceptable for a knife of this price point.

Kershaw Injection Review – Final Thoughts

The Kershaw Injection is a solid attempt at a value folder with some high end details. The 3-D machined G10 scales, decorative thumb studs and pivot, and G10 backspacer are all high end finishes more commonly found on a custom knife than a Chinese production blade. But the off center blade, stiff pivot, and bead blasted finish bring us back down to earth. I also was not a huge fan of the weight and cramped feel of the handle. These are all minor gripes, and I realize you can only do so much with a budget knife, but I feel obligated to say something. While I like aspects of the Injection 3.0, it doesn’t make my list of recommended budget knives. There are definitely knives I prefer over the Injection at this price point.

Still, the effort Kershaw put into this one is apparent and the Injection is certainly capable as an EDC. The fact that I am even nit-picking a $35 folder shows that we are truly spoiled to have so many interesting and high quality budget blades at our disposal. Ultimately, this is a decent buy at $35 and I recommend it to fans of the design.

Kershaw 3820 Injection 3.0 Folding Knife

Liner lock -Thumb stud -Reversible pocket clip -Steel: 8CR13MoV
Bead-blasted finish -Handle: 3D-machined G-10
Blade length: 3 in. (7.6 cm) -Closed length: 4 in. (10.2 cm) -Overall Length: 7 in. (17.8 cm) -Weight: 3.3 oz. (93.6 g)
Liner lock; Thumb stud; Reversible pocket clip
Steel: 8CR13MOV, bead-blasted finish

I recommend buying the Injection at Amazon or BladeHQ. Thanks for checking out my review.

Chris Reeve Mnandi Review

by Dan Jackson 13 Comments

Last Updated: January 10, 2018
When I think Chris Reeve Knives, I first think of the Sebenza, their flagship blade. Then my mind wanders to the Umnunzaan, their amped up tactical offering. Only after sampling both of those knives did I take a genuine interest in the Mnandi. It was one of those knives that I knew that I wanted to check out, but would have to get around to it eventually. My guess is that frame of mind holds true for a lot of collectors, especially those getting into knives within the past 10 years like I did in the middle of the tactical knife boom.

Buy the CRK Mnandi at BladeHQ

And that is a shame because the Mnandi is a really nice knife. Before moving forward with this Chris Reeve Mnandi review, I need to disclose that my Mnandi was built in 2011. Chris Reeve has since made some subtle refinements to the knife. Most notably, the pocket clip has been changed to a hidden hardware design, and the blade steel has been upgraded to S35VN over the S30V model shown here. Finally, the nail nick has been changed slightly. Some prefer the old style nail nick show.

General Dimensions and Blade Details

The Mnandi has an overall length of 6.375″, sports a 2.75″ blade, and weighs 1.5 ounces. The knife is firmly in the EDC or gentleman’s folder segment. I carry mine to the office no problem and prefer it over a bulkier knife for EDC. It could easily fall into the collectible market given the wide range of inlays available, although I do believe that this is a knife that was made to be used.

The blade shape is a modified clip point design. I like the lean, aggressive profile of the blade, and the angular nail nick further accentuates that low slung profile. The short belly terminates at a fine upswept tip, and the hollow ground blade has been given a nice satin finish. Like the other CRKs I have handled, the spine is nicely rounded. This blade shape is fine for EDC, easily opening mail, breaking down packages, and taking care of other minor chores around the house and office.

Blade steel on this particular knife is S30V, although if you were to buy a Mnandi new today it would likely come in S35VN. I was surprised to get a little flak in my large Sebenza review for reviewing an old model of the knife with S30V instead of S35VN. Practically speaking there is very little difference between the two steels. At higher hardnesses the S35VN will be a little easier to sharpen, but beyond that most people won’t notice much of a difference. I found the S30V on this knife very easy to maintain. Chris Reeve Knives is known for heat treating their blades on the softer side to aid in ease of sharpening. I don’t have a problem with that when it comes to my EDC knives, but edge retention junkies would prefer a harder heat treat.

Handle, Ergonomics, and Pocket Clip

The handle of the Mnandi is where things really start to get interesting. The knife is available with a large number of exotic wood inlays and is even offered with mammoth ivory bark and bone. My knife happens to have an African Blackwood inlay. Underneath the wood scales is full titanium construction. One thing I never really noticed about the Mnandi until I got one in my hand is that the titanium is actually two-toned. The flats have been given a satin finish while the edges are media blasted. It’s a really nice detail. On the back side of the knife you have a very nice flow through design. There is a single decorative standoff and a stop pin.

The Mnandi is a small knife but the handle offers plenty of room for a full grip and the knife is surprisingly comfortable to use. The arced handle supports your fingers much in the same way the Spyderco Dragonfly does, and you have some excellent jimping on the spine of the blade as well. CRK really knows how to get jimping right. It’s not thumb-shreddingly aggressive, but it provides enough traction to keep you in the game. Between the wood onlays, titanium handles, and 3d machined pocket clip you have a decently thick and comfortable handle. I wear a large glove and for a small knife, the Mnandi really works ergonomically.

The pocket clip is one of my favorite details of the knife. It is a 3-D machined stainless steel clip. It buries the knife in your pocket, is very secure, is discrete, but also has a nice decorative element to it. I’ve reviewed well over 100 knives on this site, and this is definitely the nicest clip I have come across so far. Chris Reeve recently updated the clip, making it a hidden hardware (no visible screws) design. It’s impressive that they figured out a way to improve on this already awesome pocket clip.

With all that said, my favorite way to carry the Mnandi is in the little leather slip sheath it came with. I haven’t tried to hide my love affair with the Victorinox Alox Cadet, one of my all time favorite EDC knives. A big part of the reason why I like that knife is because it’s perfect for pocket carry. Well, the Mnandi is also great for pocket carry, and if you use the leather sheath it helps protect the knife from getting beat up in your pocket. I highly recommend buying the leather slip sheath if yours doesn’t come with one.

Deployment and Lockup

The Mnandi relies on a stylized nail nick for opening. Visually, the nail nick really suits the design, and it works fine for one hand opening too. It’s ambidextrous, and I am pleased to report that I can open the knife left handed without much trouble. The action on my knife is super smooth. Like all of the other CRK offerings, this blade rides on phosphor bronze washers, and it has a smooth, glassy action that I find extremely satisfying. This is what owning a CRK is all about. It’s also worth mentioning that the pivot hardware is all custom, with the Chris Reeve logo engraved on the show side, and a collared pivot on the other.

For lockup you have a Chris Reeve Integral lock. My particular knife locks up late, but it’s very secure and there is no stick or issues with it. There isn’t much else to say although I will mention that blade centering is perfect.

Chris Reeve Mnandi Review – Final Thoughts

The Mnandi is the third model I have sampled in the CRK lineup, but it may very well be my favorite. Everyone is different, but these days I really get a lot of mileage out of small EDC knives that I can pocket carry. The Mnandi is about as good as it gets in that department. This knife is perfectly executed, has a lot of interesting details, and has been very satisfying to own. I can’t think of much to complain about, although I fully appreciate that for many, the $375.00 price tag will be a non-starter.

It’s small and expensive, so I’m not saying this one is for everyone, but if you have any interest in the Mnandi do yourself a favor and buy one. I have really enjoyed mine.

Chris Reeve Mnandi – From $375.00
From: BladeHQ

I recommend purchasing the Mnandi at BladeHQ or KnifeArt. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

CRKT Swindle Review

by Dan Jackson 15 Comments

I have been on a bit of a high value folder kick recently, focusing especially on the $30-40 segment. I’ve neglected this part of the market over the past year or two, favoring fixed blades and higher end folders, but a good deal of interesting stuff has come out in the $30-40 arena, hence the recent reviews of the Ontario Rat II and ESEE Zancudo, and I have a few more in the works.

Buy the CRKT Swindle at BladeHQ

Buy on Amazon

While the knives I have handled at this price point are solid and very functional, they are somewhat formulaic, and have a heavy emphasis on being tools rather than design objects. There is nothing wrong with that, as many seeking out a $35 folder want a good tool knife, but something has to be said for interesting design.

That is definitely not the case with today’s knife, the CRKT Swindle. Designed by Ken Onion, the Swindle pays homage to the classic swayback jack pattern, but features many modern touches like 3-d machined handles, a flipper, IKBS, a framelock, and a very interesting pocket clip. Ken and CRKT have definitely pushed the envelope in what is possible with a $30 folding knife, and we are all the better for it.

General Dimensions and Blade Details

The Swindle has an overall length of 7.5″, has a 3.2″ blade, and weighs 3.3 ounces. The long thin design really stretches out the blade and the end result is a practical gentlemanly type folder that works well for EDC, but also stretches into dress knife territory as well.

The full steel handles (gun metal gray with a matte texture to look like titanium) give the knife some extra heft, but it is still very carryable. And while it isn’t a “tactical” knife by any means, the long narrow blade comes to a very fine tip. It’s plenty stabby and I wouldn’t want to be on the business end of it.

The blade is an elegant modified wharncliffe design. Again, it’s a throwback to the swayback jack pattern of yore, with a high hollow grind, neatly applied edge, subtle belly and needle fine tip. Out of the box the Swindle came screaming sharp and ready for work. The narrow blade is plenty capable when put up against cardboard, and it makes for an ideal letter opener at the office. I also used the knife with some success when breaking down a chicken carcass. The upswept tip requires some extra flexibility, but it is fine for detail work. I really like that CRKT went ahead and rounded the spine. That’s a high end finish that I really like. I also like how they went for a satin finish over a cheaper bead blast. It shows off the nice even grinds and is more resistant to rust.

CRKT offers the Swindle in 2 blade steels: 8Cr14MoV on this model with the plain handle scales, and 12C27 Sandvik on the more expensive grooved version. I’d prefer 12C27 on the plain handled version honestly, but this 8Cr14MoV isn’t bad for the price. Similar to AUS8, this is a proven steel found on other budget folders like the Spyderco Tenacious. It’s a softer steel but it sharpens easily, takes a nice satin finish, and holds a reasonable edge. At this price point it’s hard to find much else, and I do like how they give you the option of 12C27 if you want to spend a little more money.

Handle, Ergonomics and Pocket Clip

The handle is plain stainless steel finished gunmetal gray to resemble titanium. I love how the handles are 3D machined, and I am impressed with how well made this knife is. CRKT has all their product manufactured in Taiwan, and the Taiwanese manufacturers really have their act together. 3 screws hold the handle together: one for the pivot, one for the pocket clip, and one for the backspacer. The end result is very elegant. Even the lockbar cutout arcs gracefully, and when the knife is closed the blade tucks completely inside the handle. This kind of stuff you just don’t find on $30 folding knives. Compared to my clunky Tenacious, Ken Onion and CRKT have thrust the value folder into rarefied air.

From an ergonomic perspective the Swindle works very well for an EDC knife. The handle is large enough to accommodate a 4 finger grip, and the curved shape fits naturally in the palm. I’m not usually a big fan of jimping, but CRKT found a great balance of grip and comfort in the jimping on the spine of the Swindle. The jimping here very much reminds me of the jimping found on a Sebenza’s, and the rounded spine furthers the connection. If you throw the knife in reverse grip a second run of jimping on the backspacer catches your thumb nicely.

The pocket clip is quite unique, and is more something you would find on a pen than a pocket knife. It sits on the back of the handle, kind of like an extended backspacer, and is spring loaded to provide tension. I won’t go so far as to say it’s my favorite pocket clip (because it isn’t), but it works, and it fits well with the theme of the knife. No doubt this will be a polarizing point for some folks. I think it’s a bold touch on an equally bold knife, and it has been well executed and further distinguishes this knife.

Deployment and Lockup

For deployment you have a flipper on IKBS bearings. The detent is well tuned and the blade flies out with the push of a finger. The action is very nice. The flipper is a low profile design, but it’s jimped to provide a little extra traction. Again, CRKT has managed to find a sweet spot in cutting jimping that is practical without being over the top aggressive. I am still not sure if bearings are 100% necessary on a knife, but here it has been well implemented and I certainly am not complaining. The Swindle, with its relatively light blade, flips with the best of them.

For lockup you have a stainless steel frame lock. It locks up early and securely and I did not experience any play in my knife. Lockup has settled in right around 25%, which shows that they paid attention to the tolerances and geometry of the frame lock, and suggests that it will hold up for a long time. Blade centering is also dead perfect, which, while not a requirement on a $30 knife, again elevates the sense of pride of ownership, and my overall appreciation for this tool.

CRKT Swindle – Final Thoughts

I have had a number of really nice high value folders cross my desk these past few weeks. Knives that I enjoy and recommend. The Swindle is truly something else. Not only is it functionally a very solid knife, it has so many details and little upgrades that I find myself examining it from the perspective of a higher end folder. I haven’t loved all of Ken Onion’s designs, but this one truly deserves accolades. It’s outside his typical work, and has allowed him to showcase his talent as a designer. The pocket clip may not be “perfect” by everyone’s standards, but it works well in the context of the overall knife. Barring that I find very little to complain about the knife.

I decided to photograph my Swindle next to my Kershaw Cryo on purpose, to show what is possible for a $30 folder, and two steel framelock flippers at that. Both knives feature big name designers, but beyond that the knives quickly diverge.

With the Swindle you have a graceful and balanced knife, whereas with the Cryo you have a stubby little brick. The Swindle features a rounded spine and 3-d contoured scales, while the Cryo is slab built with sharp edges. With the Cryo you get an off-center blade and shitty assisted opening. With the Swindle you get a manual action knife with a beautiful detent and an IKBS bearing system. With the Cryo you get a coated blade, with the Swindle you get a nice satin finish. The Swindle is an exercise in minimalism and restraint, while the Cryo is pockmarked with holes and screws.

I don’t mean to turn this into Cryo bashing, after all, I felt that the Cryo was an OK knife for what it was (although disappointing in many respects). But next to the Swindle there is no comparison in my mind; the Swindle is a superior EDC knife, and CRKT has redefined what’s possible with a $30 folder.

The design of the Swindle may not be for everyone, but if the knife interests you at all I suggest buying it. I wish I jumped on mine earlier. Highly recommended.

Columbia River Knife & Tool Columbia R Swindle Knife COLUMBIA RIVER KNIFE & TOOL Swindle Folder, One Size

Fast Opening: IKBS ball bearing pivot deploys the blade fast
Brute Strength: Frame lock utilizes a thick lock bar to secure the blade
High Tech: Tensioned clip secures knife to the pocket
Designed by Ken Onion in Kaneohe, Hawaii
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Swindle at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.