Knives By Purpose

Northwoods Knives Indian River Jack Review

I have been interested in traditional slip joint knives for a while now. I am not alone. Many have come to enjoy the pocket friendly lines of a simple slip joint, and the thinly ground blades cut like nothing else. Some might find the absence of a lock unnerving, but in my experience most of the time a slip joint is more than enough knife for normal utility tasks.

Buy the Northwoods Indian River Jack at KnivesShipFree

As I wandered down the slip joint rabbit hole I eventually came across the Northwoods Knives Indian River Jack. Here is a simple single blade pattern, but with an upgraded blade steel (in this case, CPM-154). No other bells or whistles to speak of. Some might refer to this as an ever elusive “perfect EDC knife”.

The Northwoods Knives brand was purchased by Derrick Bohn of KnivesShipFree sometime around 2010-2011. Northwoods were originally made by Great Eastern Cutlery and Queen Cutlery (2 American companies specializing in traditional folders), and Derrick has continued the tradition of having the knives made in the USA by these manufacturers. The knife in this review was made by GEC, although the current version of the knife is made by Queen (at the time of writing this article, mid 2015). IRJ’s are released in small batches. Due to the limited supply and unique selling proposition of a 154CM blade, demand for the IRJ is out of control. The knives quickly sell out every time a batch hits Derrick’s website.

I was fortunate enough to snag one of the 2014 GEC manufactured IRJs, and have been carrying the knife for many months now.

General Dimensions and Blade Details

The IRJ has an overall length of approximately 6.25″, a 2.5″ blade, weighs 2.2 ounces, and is made in the USA. This knife has a similar footprint to my cherished Victorinox Cadet, and is an ideal size for every day carry (EDC) in my book. Certainly, this makes for a fine gentleman’s folder. And given the limited quantities of the IRJ I would classify this as a collectible as well. As I try to compare the IRJ with other knives in my collection, I would almost classify this as a cross between the Cadet and CRK Mnandi.

The blade of the Indian River Jack is a simple drop point pattern. Again, it reminds me of the blade on the Cadet. Just dead simple. In this instance there is a very slight swedge. Still very simple. The blade has a full flat grind with satin finish, and is thin behind the edge. It is a beautiful slicer. Perfect for light tasks like opening mail and cutting up fruit, but certainly capable of tougher chores. It slides through cardboard, cuts rope, and whittles wood with ease.

My version of the Indian River Jack came in CPM-154 stainless steel. As much as I enjoy the charm of the high carbon steel blade on my GEC Viper, there is something to be said for the ease of maintenance of stainless steel. I can ride this knife hard, put it away wet (sometimes literally), and not have to worry about rust or heavy oxidation. I have been guilty of occasionally not cleaning and oiling my high carbon bladed slip joints as well as I should have, and coming back to find the blade covered with rust. Plus CPM-154 is just excellent steel. It takes an edge easily enough and holds it for a long time. Combine that with the super thin geometry of the IRJ’s grind, and you are left with almost unmatchable slicing performance.

Handle, and Ergonomics

The handle of the Indian River Jack is a simple pill shape, with nickle silver bolsters and brass liners. The handle comes in a variety of “covers” (handle scale materials). Mine happens to have jigged bone for the handle material, which is a handle material that I don’t have a lot of experience with. It certainly fits the traditional aspects of the knife. The nickle silver bolsters are highly reflective and lend a touch of class (and extra heft) to the IRJ.

Everything has been riveted together. Fit and finish is pretty good on my knife. The transition between backspring and spine of the blade on my example could be better, and there is a tiny gap between the liners and backspring. But beyond that the pieces line up and the finish work is nice. Given the price I am not disappointed.

In hand the Indian River Jack is a capable little knife. There is no jimping, no finger choils, no lanyard hole, no skull crusher pommel, no rubber inserts, or skateboard tape. Yet still the IRJ seems to work just fine. There is plenty to hold onto and I have enjoyed using the knife for a multitude of basic chores. As with any folding knife, it needs to be treated with care and respect.

While there is no pocket clip to speak of on the Indian River Jack, KnivesShipFree does include a leather slip case with the knife. The leather on the slip case is thick, and carrying the knife in the case is akin to carrying a small secondary wallet. Slip cases prevent the knife from getting beat up in your pocket, and I am a fan of these kinds of cases – especially for dressier pieces like this. It’s a nice touch and a great option for the IRJ, especially if you want to preserve the knife as a collectible.

Walk and Talk

I have disbanded with the usual “Deployment and Lockup” section since this is a slip joint. Instead, lets discuss the “walk and talk” of this modern traditional folder. The IRJ features a slim nail nick to access the blade. It is cut sharply and the knife is easy enough to open and close with two hands. This will never compare with the easy opening of a thumb stud, thumb hole, or flipper, but that is part of the charm of these older patterns.

The backspring on the IRJ is pretty snappy. I won’t proclaim to be an expert on the walk and talk of slip joints, but compared with some of my other slippies, I’d say it’s a on the strong side. The blade opens and shuts with a satisfying snap. There is no hard half stop, but the blade does seem to naturally rest in the half position. There is a little pinch of resistance there as you push the blade open or closed. All said the action on this slip joint is smooth and satisfying.

Indian River Jack – Final Thoughts

It should come as no surprise that I really like the Indian River Jack. The classic design, good fit and finish, and CPM-154 blade all serve to make it a winner in my book. Despite being somewhat rare and coveted, this is still a working knife at the end of the day. It isn’t perfect, but that makes it all the more endearing. Compared with the fancy folders of today, the $130 price tag is relatively modest.

In a way I have struggled to write this review. This knife is understated, but excellent. I wanted to give it the respect and appreciation it deserves without being over the top, because doing so would be incongruous with the knife. But maybe I should be over the top. This knife is worthy of the praise.

For those on the quest for the “perfect EDC knife”, the Indian River Jack could be a contender depending on your preferences. If you are like me, and gravitate towards small sleek knives for daily carry, then the IRJ checks a lot of boxes. Perhaps the limited availability is the biggest detractor to the IRJ. You have to scour the secondary market or keep an eagle eye on KniveShipFree (the only purveyor of Northwoods Knives) for when they get new shipments in. Regardless, the IRJ makes my list of best EDC knives. Highly recommended for fans of minimalist and traditional folding knives.

Indian River Jack – From $130.00
From: KnivesShipFree

I recommend purchasing the Indian River Jack at KnivesShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Slysz Bowie Review

by Dan Jackson 19 Comments

Last Updated: August 1, 2019
An often enjoyed pastime of production knife collectors is to discuss various “Sebenza Killers” arriving on the market. The Sebenza has long been considered a gold standard in high end production cutlery, and the thought that a competitor might knock the Sebenza off it’s podium has been a topic of conversation for some time. The Bradley Alias might be the most notable knife to get bandied about as a “Sebenza Killer,” and there have been several others over the years. But 25+ years later the Sebenza is still going strong, and there seems no end in sight to its reign.

Buy the Spyderco Slysz Bowie at BladeHQ

Buy on Amazon

Ironically, the rise of titanium framelock flippers (something Chris Reeve Knives doesn’t have an answer for) has collectors moving on to other topics, and the thought of a “Sebenza killer” suddenly seems less relevant than it once did.

Still, it’s interesting to think of knives that may stack up to the Sebenza, and as I admired my Slysz Bowie I couldn’t help but draw several comparisons to the Sebbie. Designed by Polish knifemaker Marcin Slysz, the Bowie is his second collaboration with Spyderco, with the Techno being his first.

The Techno met the market with great reviews, and remains a highly regarded production piece. The Bowie is a bigger offering. While quirky like the Techno, the Bowie has its own more business-like character. The knife is expensive, but begged for further examination. I’m pleased to offer some thoughts on the Slysz Bowie after an extended period of carry and use.

General Dimensions and Blade Details

The Slysz Bowie has an overall length of 7.79″, a 3.42 blade, and weighs 4.3 ounces. The knife is manufactured in Taiwan. Depending on your preferences this could make a good every day carry piece. This is what I consider to be a medium sized knife, and it sits between the large and small Sebenza. Of course if you are looking for something smaller the Techno, also designed by Polish knifemaker Marcin Slysz, could be more your bag. I have never stressed out over blade to handle ratios, but I can’t help but feel like there is a lot of excess handle on this knife, and there is something a little funky about the proportions of the Slysz bowie.

As it’s name suggests, the Slysz Bowie features a clip point blade. This is more of a non-traditional bowie with an elongated clip, and rounded spine. The rounded spine is a lovely detail, and is one I don’t recall seeing on a Spyderco before. The blade has a full flat grind and it is very thin and slicey. The finish is a stonewash that was first taken to a high polish. The blade is still highly reflective and mirrors whatever you hold it up against. I liken it to the finish on my Fantoni CUT Flipper. Clip points have always been a very practical blade shape, and this version provides a good balance of tip strength and fine piercing ability. The cutting performance is also very good.

Spyderco went with CTS-XHP, the same steel on the original Techno. I have had a good deal of experience with CTS-XHP using the Domino. Having been a fan of that steel on the Domino I immediately put the Slysz Bowie to work. This knife is a hoss, and easy handled cardboard boxes, a rope cut test, and some woodwork in addition to regular EDC chores. CTS-XHP holds a nice edge but I especially appreciate this steel’s ease of sharpening. I have yet to have any problems with rust or corrosion with CTS-XHP and so far the Slysz Bowie has been no different.

Handle, Ergonomics, and Pocket Clip

The handle of the Slysz Bowie is comprised of 2 contoured titanium handle slabs. The gentle radius of the handles is a nice touch, and it seems like that is how they were able to keep the edges crisp without the knife feeling too blocky in hand. Construction is top notch with matte gray hardware (including an oversize pivot) and a substantial black G10 backspacer. I know that the bright blue backspacer of the Techno was a favorite feature of many. Personally I prefer the more subdued appearance of the black backspacer. The backspacer is jimped in 2 places and protrudes ever so slightly from the handle scales. The light chamferring to the corners of the backspacer give it dimension and detail that belies its plain black appearance.

The titanium handle slabs have been given a heavy stonewashing. The stonewash supplies the slightest amount of texture to the handles. It also makes the Slysz Bowie very easy for me to cram into my pocket without agonizing over it inviting scratches like a freshly waxed Porsche parked too close to a grocery store. Compared with the Rubicon (another recent Spyderco release) the Slysz Bowie practically begs for use.

The Slysz Bowie feels pretty good in hand. There is a run of Sebenza like jimping along the spine, as well as the backspacer, and the good size handle accommodates my larger hand well. Although no efforts have been made to round the edges of the handles, the contoured titanium makes up for it slightly. The knife is fine for normal use, but I would reach for a fixed blade if I had an extended heavy duty cutting chore. The Slysz Bowie feels capable in forward and reverse grips and handles like a well-balanced medium sized folder should.

The Slysz Bowie takes advantage of Spyderco’s wire clip. It should be no surprise to regular readers that this is one of my favorite clip designs. It’s very discrete and the Slysz Bowie all but disappears into the pocket. The handle is tapped for ambidextrous tip up carry. The knife carries very well being relatively slim and relatively lightweight considering that it’s a decent sized full titanium framelock folder. I will say that I did have issues a couple times with my pants pockets binding up on the lock spring cut out on the handle when I tried to draw the knife.

Deployment and Lockup

Being a Spyderco, this knife gets opened with its thumb hole. This is a generously sized thumb hole that is easy to access with your right hand and opens smoothly and quickly with a satisfying “thwack”. The phosphor bronze washers are very smooth and the detent is tuned to where you can easily flick the knife open but you don’t need to worry about the blade falling out of the handle.

Unfortunately, us lefties are left out in the cold. Just like with the Techno, this knife is difficult to open with your left hand. It’s not impossible, but you can’t enjoy flicking the knife open like you can with your right hand. That’s a shame because part of the appeal of Spyderco is their (usually) ambidextrous designs. I’ll stop whining as I understand that 90% of the people reading this are right handed, but I gotta “keep it real” for my fellow lefties.

For lock up we have a classic titanium frame lock, or a Reeve Integral Lock (RIL) as Spyderco likes to call it. This lock does not benefit from a steel insert like some of Spyderco’s other framelocks, and my knife locks up pretty late (around 75%). That said, its a very sturdy lockup and there is no blade play in any direction. There isn’t any blade stick either. Blade centering on my example is absolutely perfect.

Spyderco Slysz Bowie Review – Final Thoughts

The Slysz Bowie is a hell of a knife, and I imagine if Spyderco released it either a few years ago or for $100 less, it would have made huge waves in the production knife scene. As it stands, it’s a beautiful knife and a solid performer. I pictured it next to my American Lawman for a reason – the Slysz is meant to be used. But I think that the $320+ price tag will scare many folks off. And the absence of a flipper, bearings, steel lock insert, and big name American designer doesn’t give it that “gee whiz” factor that seems to drive a lot of consumer attention these days.

I have justified expensive knives in the past. They are luxury goods. People buy them because they want them. Still, I think a discussion on price is appropriate here. Personally, I bought mine used for $230, and at that price I was willing to check it out. For $300 it was just too rich for my blood. While I could somehow justify paying full retail for the Rubicon, I could not do that with the Slysz.

Here is a shot of the Slysz Bowie next to another hard working knife, the Cold Steel American Lawman:

I am more than a little surprised about the price of this knife, especially since the Farid Mehr K2 is a bigger titanium frame lock, has an equally exotic steel, is also made in Taiwan, and has a MSRP of a full $100 less than the Slysz Bowie. I’ve since learned that the reason for the price difference is largely due to the 3-D machined handles of on the Slysz Bowie and the polished and stonewashed blade. Whether these features are worth the $100 difference is up to you.

The Slysz Bowie is still pretty far off from what a Sebenza costs (currently $410 for a Large 21), so if Spyderco truly had a “Sebenza Killer” in mind, at least it’s almost $100 less. In many ways I like the Slysz Bowie more than a Sebenza. I prefer the full flat grind, superior blade steel, 3-D machined stonewashed handles, thumb hole, and better action. When you consider the value proposition, maybe the Slysz Bowie is priced appropriately after all.

If you can swallow the price tag, or can snag a good deal on it, this is an awesome knife. I am not ready to declare the demise of the Sebenza, but this is still a damn good knife.

Spyderco C186TIP SLYSZ Bowie Folding Knife, Titanium, 3.42-Inch

Plain sharp edge
7.79 inches overall length
4.37 inches closed length
3.42 inch blade length
Titanium handle

I recommend purchasing the Slysz Bowie at Amazon or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated – thank you very much!

Shirogorov 95t Review

by Dan Jackson 12 Comments

I have had folks occasionally confess that they live vicariously through my reviews of high end pocket knives. I have handled some nice stuff over the years, but for the most part my wallet and I have been able to resist the renaissance of mid tech and custom knives. This is despite the deluge of eye candy on Instagram, which seems to suggest that everyone acquires $750+ knives and $100 titanium bottle openers at the same rate I buy a loaf of bread and some eggs at the grocery store. Well, I finally gave in, joined the masses, and grabbed this Shirogorov 95t.

Buy the Shirogorov 95t at BladeHQ

But this didn’t happen overnight. I have lusted after a Shirogorov for several years before eventually getting one. I actually had the chance to buy one directly from the maker at the 2014 Blade Show. I was one of the few to get their ticket called in their lottery. The problem was the knives started at $1,000+, which was more than I was willing to spend. I scored this gently used 95t off the forums while recording an episode of Gear Geeks Live.

For those unfamiliar with the maker, Shirogorov is a Russian knife company operated by the Shirogorov brothers. There isn’t a ton of info on the company (at least in English), but this is a growing manufacturer focusing on high end production and custom knives. They might be categorized as pioneers in the recent trend of high end production knives coming out of Russia and Asia. They are known for sleek designs, fanatical attention to detail, and exceptional fit and finish.

The 95 is one of their more popular models, and the 95t is a full titanium handled version with their signature “turtle” pattern (hence – a 95 “t”). This review has been a long time coming, and I’m pleased to finally be able to share some thoughts on this exclusive knife.

General Dimensions and Blade Details

The 95t has an overall length of 8.75″, a 3.75″ blade, and it weighs 5.2 ounces. This is a large knife, and is not well suited for my style of every day carry (EDC). To me this is more of a self defense knife or large utility knife. Given how expensive it is, it has largely remained a collectible for me, but I did carry and use it a little. Mostly for purposes of putting this review together.

The 95t’s drop point blade is about as simple of a shape as you can get. Just 3.75 inches of flat ground and lightly tumbled steel. Of course, the devil is in the details, and the 95t has some nice ones on its blade. The edges have been slightly chamferred up by the jimping and the plunge lines are very clean. I wasn’t able to examine the factory edge on this particular knife (the previous owner attempted to sharpen the knife on a [easyazon_link asin=”B006WRH198″ locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Wicked Edge[/easyazon_link]), but as it stands it cuts very cleanly. The finish is very fine and the knife glides through cardboard.

My 95t came with Elmax steel for the blade. Elmax is a higher end stainless steel by Bohler Uddeholm. Shirogorov offers the Model 95 with several other blade steels as well, including S30V. I’ll be the first to confess that this 95t has not been a real heavy “user” for me. First of all, at $700+ I have plenty of less expensive knives to beat up on, and secondly, with a near 4″ blade the 95t is well outside my normal range for daily carry – even on evenings and weekends when I’m not working in an office. I will say the 95t tracks through paper effortlessly, and opens boxes with the best of them. Anecdotally, the full flat grind and finely finished blade seemed to aid with slicing performance.

Handle, Egonomics, and Pocket Clip

The 95t has a full titanium handle. As previously mentioned, this particular model has Shirogorov’s signature “tortoise shell” design carved into it – hence the 95t. The handle really is a thing of beauty. The titanium has been masterfully milled. The edges are contoured and the single stand off is sunk into the titanium frame. There are a number of nice details to explore, from the “channel” behind the flipper tab for your finger to fall into, to the polished edges of the custom hardware. Speaking of custom hardware, while the slotted hardware is pretty, it easily mars if you try to adjust the pivot or remove the clip. The titanium itself has been given a thorough tumbling. This helps hide wear and contrasts nicely with the bright stainless blade and accents.

The 95t is a large folding knife and it feels very good in hand. There are no sharp edges to speak of, save the cutting edge of course, and the simple handle shape allows your fingers to fall in place. There is a short run of jimping on the spine which reminds me a little of a Sebenza, but isn’t quite as sharp. The turtle pattern provides some additional traction without being overbearing, and the stonewashed titanium has a texture of its own. This simple handle will fit most people well.

The pocket clip is a 3-D machined piece of titanium, and is a miniature work of functional art in its own right. Drilled and tapped for right side tip up carry only, the clip compliments the lines of the knife. It also works well, affording secure and reasonably deep carry. The pommel just peeks out over your pocket when in place. The 95t is a large knife, but carries nicely considering. It has some heft to it, but isn’t over the top heavy. It carries well for its size.

Deployment and Lockup

The 95t flips fantastically. While it isn’t as much of a rocket launcher as the Zero Tolerance 0454, it’s still a pretty damn good flipper. The action is crisp and the blade kicks open easily with the push of a finger. My particular knife runs on a single row bearing system, however, I know that Shirogorov also offers knives in a fabled multi row bearing system (MRBS). I have never handled one of their MRBS knives, so I can’t comment on that feature. I can say this single row bearing knife is very smooth. The blade shoots open and falls closed easily.

For lockup we have a frame lock with a steel insert. Lockup is early and extremely solid. There is no play in any direction, and the lock is easy to disengage. Blade centering is perfect.

Shirogorov 95t Review – Final Thoughts

I have had the privilege of checking out some damn cool stuff over the years. So far I have largely resisted the temptation to venture in to mid tech and custom knife territory, but the Shirogorov was too hard for me to resist. I am very happy I got a chance to check this knife out. It’s beautiful and amazingly well executed. Every aspect of the knife has been meticulously considered, and the end result speaks for itself. This is one heck of a knife, and if you have the money and desire to own one, I do not think you will be disappointed.

Here is a shot of the 95T next to another beautiful knife, the Fantoni CUT Flipper:

I won’t deny that this is an expensive piece. I am unsure what these retail for exactly, as they don’t stay on the retail market for long. I would guess anywhere from $750 to $1000. Either way you are paying a lot of money for this knife. So certainly this is not a knife anyone “needs”. I’ll never be able to answer for you whether it is “worth it”. Only you can make that decision. When I compare the 95t to a large Sebenza or a Hinderer XM-18, I think you are getting something more for your money. I’d have a hard time deciding between this and the ZT 0454, but I think the 95t is made just a little bit better.

I usually sell off many of the expensive knives that land in my collection. I’m not made of money and I need to do this to check out new stuff. I have been sitting on this 95t for at least 6 months now. I think the fact that I have stalled writing this review for so long says a lot. I am having a hard time letting it go, and just might convince myself to keep it. As someone who has had a lot of knives pass through his hands that’s about as glowing of an endorsement as I can offer.

Shirogorov 95t
From: BladeHQ

Occasionally Shirogorov knives find their way to BladeHQ, and I recommend purchasing them there. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 485 Valet Review

by Dan Jackson 16 Comments

Last Updated: February 2, 2019

2013 and 2014 marked pretty quiet years for Benchmade. Not a whole lot of interesting stuff rolled off their shelves. The Volli was my favorite and has proven itself to be an excellent knife. Beyond that there wasn’t a whole lot to report.

Buy the Benchmade Valet at BladeHQ

Buy on Amazon

Benchmade’s 2015 SHOT Show releases actually looked pretty strong. The 485 Valet was one model that caught my eye. Perhaps most surprising was that the knives became available about a week after the show. Gone are the days of lusting over pre-production tools at SHOT only to find them released sometimes years later. Initially I was going to hold off on acquiring a Valet, but all it took were a couple positive affirmations from Tony regarding his knife and I had a Valet en-route to my office.

General Dimensions and Blade Details

The Valet has an overall length of 6.69″, a 2.96″ blade, and it weighs 2.18 ounces. The knife compares favorably to the Benchmade Mini Griptilian although it’s much sleeker. The low profile handle and spear point blade were innately appealing. This is a slim every day carry (EDC) piece that easily doubles as a gentleman’s folder with a more modern flair.

The Valet’s packs plenty of cutting edge, a high flat grind, and a sturdy tip all into a sub 3″ blade. The blade is ground thin and it almost cuts like classic slip joint (not a bad thing). I had no trouble zipping through boxes, bags, and all the little stuff that comes across my path. Everything from sliding between the folds of an envelope free a cable bill to de-boning chicken thighs for a stir fry.

Benchmade went with Bohler M390 stainless steel for the Valet. I have been putting M390 through its paces between this Valet and my ZT 0620. Heat treated to 60-62HRc, M390 is a super steel with superior edge holding abilities, yet it is still easy to maintain. I have been putting the Valet through it’s paces, and I’ve been happy with the results. I sliced up a big stack of cardboard in an informal “cut test” and managed to wear the edge down a bit after a while. I ended up sharpening the knife on the fine stones of my Sharpmaker. After just a few passes I could tell the edge was coming back, and I was able to quickly restore the edge to hair shaving, paper slicing performance. M390 is also very corrosion resistant.

M390 is apparently very expensive (on a podcast Tony and I determined that it appears to sell for 3x as much as a more normal steel). Given the option I would have selected a S30V or 154CM version if it meant a substantial reduction in purchase price, but I appreciate that Benchmade is interested in offering a premium product.

Handle, Ergonomics, and Pocket Clip

The Valet has a sleek gray handle with smooth G10 over milled out stainless steel liners, and a gray G10 backspacer. Handle construction is typical Benchmade quality. The G10 is contoured (3D machined) has been nicely finished. The steel liners are flush, and the backspacer sits solidly in the middle. I like the gray. It’s different, but nothing crazy. This isn’t a big handle, but it’s well made.

The Valet is a small knife and it feels like a small knife. I’m able to get a full grip on it, but there isn’t much room beyond that. It’s perfectly fine for little EDC tasks. There is no jimping, or much in the way of notable ergonomic features. The little knife sits in your hand well enough, and is more than adequate for normal use. I did not find the smooth G10 to be “slippery” and did not have any issues using the knife normally.

The pocket clip is a nice stainless steel deep carry clip. It buries almost completely into the pocket and is discrete. The handle is drilled and tapped for ambidextrous tip up carry. I like this clip and I think it works well.

The Valet also carries really well. At under 3 ounces and you quickly forget the knife is in your pocket. Perfect as either a discrete primary EDC or a lightweight backup knife.

Deployment and Lockup

This is an axis lock knife, with thumb studs. Usually, that would be all I need to hear, but I am concerned that this time Benchmade may have tried to do too much with too little. The positioning of the thumb studs and axis lock feels cramped. The axis lock is smaller than on other axis lock knives, and the thumb studs sit very close to the handle. The knife looks cool, and it certainly works, but it isn’t the most comfortable knife to open and close repeatedly. I’ll be curious to see if anyone shares that opinion with me.

Lockup on my knife is good. Out of the box there was a tiny bit of horizontal blade play, and a little more developed after a month of use. Pretty much all of my axis lock knives have a little play in them unless I tear them down and loctite the pivot. I know some people aren’t fans of the axis lock (too many moving parts and small springs to break), but I have always liked them. This one is smaller than I’m used to, but it still works.

Benchmade Valet Review – Final Thoughts

I am a little divided on the Valet. On one hand, it is a really slick little folder. I have been getting more and more into gents folders for daily carry, and visually this one ticks a lot of boxes for me. I like the smooth G10 handles, and the thin flat grind and spearpoint blade are excellent. My knife came well finished, and I didn’t run into any major QC issues that some folks have reported on first run Benchmades.

But a couple things turn me off on the Valet. The fiddly “landing gear” (small thumb studs placed very close to the knife and small axis lock) is my biggest concern. I would not recommend this knife for people with larger hands. I’m not Andre the Giant, but the position of the lock and thumb studs seems too tight for repeated use (or the mindless flicking open and closed of pocket knives while watching TV). Certainly this could be a “Your Mileage May Vary” thing. This is a beautiful knife, but I think BM leaned a little into far into “form over function” territory on this one.

I also think the price is also worth mentioning. $170 is a large sum for a small knife. I would have loved to see the Valet on the tail end of $150, and not on the tail end of $200. I realize that M390 is expensive material, and I think that folks who really appreciate a premium steel will have an easier time justifying the cost. Personally, I am not convinced this steel is worth the extra money.

But I don’t mean to end this review on a down note. The Valet potentially has a lot to offer. If it fits your hand well then there is little left to complain about. The Mini Griptilian is still my go to small Benchmade, but the Valet could be a worthy upgrade if it fits your hand and budget.

Benchmade - 485 Valet Knife, Drop-Point Blade, Plain Edge, Gray G10 Handle

HIGH-QUALITY: The M390 premium stainless steel blade offers exceptional cutting ability, wear resistance, and corrosion resistance. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The 485 is a manual knife that can be opened and closed with one hand.
COMFORTABLE: The 485's lightweight design and contoured handle make it comfortable to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Valet 485's drop-point, utility blade style and all-around functionality make it ideal for everyday carry and use.

I recommend purchasing the Valet at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Pingo Review

by Dan Jackson 4 Comments

Last Updated: August 5, 2019
I have spoken about the revival of interest in traditional slip joint knives a few times now. Today we have another slip joint review, but rather than featuring a traditional knife today’s blade could not be a more progressive collaboration. Acclaimed Scandinavian custom knife makers Jens Anso and Jesper Voxnaes have joined forces with Spyderco to bring us the Pingo, a completely modern slip joint folder.

Buy the Spyderco Pingo at BladeHQ

Buy on Amazon

The idea with the Pingo was to make a folding knife that is legal to carry in Denmark, which doesn’t allow for locking folders or folders you can open with one hand. Both Jesper and Jens are from Denmark. Although that hasn’t stopped them from making all manner of bad ass folding knives, they apparently wanted to provide something even their countrymen could enjoy.

General Dimensions and Blade Details

The Pingo has an overall length of 5.80″, a 2.35″ blade, and weighs 1.9 ounces. This is a lightweight and slim every day carry (EDC) knife that disappears into the pocket. I can’t help but compare this to the Dragonfly 2, a knife I refer to as the Pingo’s distant cousin. It is also small, features a linerless FRN handle, and has a wire pocket clip. The Pingo is a great size for daily carry and should be legal to use pretty much anywhere knives are allowed.

The sheepsfoot blade of the Pingo is funky and functional. The high flat grind makes it a capable slicer, while the absence of a serious tip make the Pingo great for delicate tasks. Case in point, I used the Pingo to cut away a bandage from my dog’s foot the other week. It worked great – both animal and handler walked away without any problems. Denmark’s law for folders restricts blade lengths to 2.756″. The Pingo easily meets the standard with its 2.35″ blade. While 2.35″ isn’t a ton of blade to work with, I got a lot done with the knife. It easily broke down boxes, opened mail, and performed mild food prep. The knife is also fine for harder chores like cutting rope and whittling wood. The absence of a serious tip doesn’t make this ideal for stabbing things or cutting out coupons, but for most tasks the Pingo was fine.

The Pingo is made in Maniago Italy and features a blade of Böhler-Uddeholm’s N690 stainless steel. N690 is great stuff and I would compare it to something like 154CM or CTS-XHP in that it holds a nice edge but it is still easy to sharpen. It gets screaming sharp with very little effort. It is also very resistant to rust and corrosion. I have really come to enjoy N690 and was pleased to see it on the Pingo.

Handle, Ergonomics, and Pocket Clip

The Pingo has a simple FRN handle with a stainless steel backspacer / spring. The FRN has a very fine waffle iron texture to it. It provides good grip but I find that it holds dirt and the little pores get clogged. Not a problem really until you decide to photograph the knife for the world to see. I’m not a huge fan of the oversize Spyderco bug logo in the center of the handle. I have never been a fan of over the top branding, and would have preferred something a little more restrained.

With all of that said, the overall handle construction is great. The button head hardware is nice and simple, and each edge of the handle has been rounded for comfort. The absence of any kind of liners make the knife extremely lightweight. While I wouldn’t pry with this knife, I am not concerned about the strength of the handle under normal use.

The overall shape of the handle is kind of elf-like, and the whole knife has a sort of otherworldly vibe to it. I will say that it feels great in hand. The simple elongated handle has plenty of room for all 4 fingers. A small run of jimping on the choil area of the blade holds your index finger in place. The absence of jimping on the spine makes the knife comfortable to use. This is a great little knife for lighter tasks.

Spyderco included the wire clip on the Pingo, which happens to also be on the Sage 1 and Dragonfly 2, a couple of my favorite Spydies. So I might be a bit biased when I say that I really like the clip on the Pingo. It’s simple, discrete, and highly functional.

In pocket the Pingo carries beautifully. It’s a wider knife, but slim and lightweight. Perfect for urban daily carry.

Deployment and Lockup

The whole point of the Spyderco Pingo is that you are not supposed to be able to open the knife with one hand. The knife is hard to open one handed, but with some finger gymnastics I can still get it done. The back spring or (“pull”) isn’t super strong, but feels appropriate and I’m not afraid of the blade falling out of the handle or anything like that. The pivot is smooth, and the action is crisp as the blade slides into its half stop, and then opens completely with a satisfying snap. All said this is a well implemented slip joint. Spyderco did include their trademarked round hole here, and when the knife is closed the hole sort of winks out at you over the FRN scales.

Here is the Pingo next to my Dragonfly 2:

Of course being a slip joint there is no lock on the knife. Personally this doesn’t turn me off and I think it is fine for an EDC knife (at least for my purposes). People have been using slip joints as work knives for hundreds of years. You just need to be careful with it and treat the tool with respect.

There is no blade play to speak of, and blade centering is perfect.

Spyderco Pingo Review – Final Thoughts

The Pingo strikes me as an excellent convergence of traditional sensibility, forward design, and modern materials. It appears simple enough, but this is a deceptively refined knife from the benches of two of the hottest custom makers on the market. The choice of materials is great and the fit and finish is good (not amazing, there are some tooling marks on the inside of the spring and the spring bows out ever so slightly from the handle at one point). Although it’s not a locking folder, it’s still a practical choice for EDC, even if you can carry a locking folder in your jurisdiction.

The Pingo is also priced attractively at under $50. I have been critical of Spyderco for mostly introducing expensive knives these days, so I have to give credit where it’s due. The Pingo is accessible, and it doesn’t feel cheap either.

If you are torn between this and the Dragonfly 2 (and your local laws allow you to carry both) I would probably recommend the Dragonfly because you can open it with one hand and it locks. But the Pingo is still a fun and functional knife and worth your consideration. Ultimately, you can’t go wrong either way. Recommended.

Spyderco PINGO Slip It Plain Edge Knife, Black

Made using the highest quality materials
Tested for quality and durability
The most trusted name in you cutlery needs
Two-hand opening Slip It
Reversible wire clip

I recommend purchasing the Pingo at Amazon or BladeHQ. Thanks for reading.

Zero Tolerance 0620CF Review

by Dan Jackson 13 Comments

Last Updated: August 3, 2019
I have given Zero Tolerance over the past year. So I actually had to pause and think when my pre-order for the 0620CF popped into my inbox. I try to feature a variety of knives from different manufacturers. Would I purchase and review this knife? I slept on it for a few days, and decided that this collaboration with Ernest Emerson was special enough to justify another Zero Tolerance review.

Buy the Zero Tolerance 0620CF at BladeHQ

Buy on Amazon

I’m glad I made that decision, because when this knife arrived I could immediately tell it was significantly different from the other ZT offerings I have sampled.

General Dimension and Blade Details

The 0620 has an overall length of 8.5″, a 3.6″ blade, and weighs 6.2 ounces. While the Kershaw / Emerson collabs are scaled down offerings, the 0620 more like a full size Emerson. This thing is large and in charge. It suits the nature of the collaboration well, but relegates the knife to a more dedicated defensive role or collector’s item. At least for me. I don’t doubt some will every day carry (EDC) this knife, and there is nothing wrong with that if you can manage the size and weight.

The blade has always been one of my favorite aspects of an Emerson. The crisp grinds and beautiful finishes of the blade contrast oddly with the often crudely finished handles. I am pleased to say that ZT did Ernest right by the 0620. This is an immaculate American tanto complete with Emerson’s 2 tone finish: satin bevels and stonewashed flats. The multi-faceted grind has been beautifully done and the blade catches the light almost like the real deal.

Where this collaboration departs from a real Emerson is that ZT decided to V-grind the edge. Say what you will about chisel edges… easier to maintain “in the field”, cut better, blah blah blah – I’ll take this standard V-grind edge any day.

I have never been a huge tanto fan, but this version features a subtle curve between the tip and secondary point. It speaks to me the same way the Lum Tanto did – a tanto blade for guys who don’t prefer tantos.

The natural geometry of a tanto blade is excellent for stabbing, and this one with its clipped point is no different. While this is a beefy slab of steel, the flat grind is lean enough to make this a reasonable slicer, and the edge has been expertly applied.

If you aren’t a modified tanto guy, ZT is releasing the 0630, featuring a modified clip point blade, much like the CQC-8 Horseman that may be more to your liking. Personally, I have been enjoying the tanto as I currently don’t have a lot of tantos in my collection.

Much like the 0562, ZT is offering the 0620 in two flavors: M390 blade with a carbon fiber handle scale (shown here), and an Elmax blade with a G10 handle scale. M390 is a super steel and I have always treated it with a little apprehension because super steels have a reputation for being difficult to sharpen. I put my big girl panties on for this review and have been actually, like, using both my 0620 and my Benchmade Valet which is also in M390. Edge retention is exceptional and so far the steel has responded well to light stropping. This is all I have had to do over the past 8 weeks or so of use. This is excellent stuff and I look forward to continuing to evaluate M390 in earnest.

Handle, Ergonomics, and Pocket Clip

The 0620 has as thick titanium locking side and the show side is carbon fiber (or G10) over a full stainless steel liner. Construction is robust, to say the least. This is an extremely solid knife and it’s difficult to describe the feeling you get in handling the 0620. Each edge is rounded, the liners and carbon fiber are seamless. Beefy hardware sits securely in the handles. The heft of the thick titanium lock side adds to the gravitas of the knife. It is impressive.

While ZT didn’t include Emerson’s signature flat head pivot and Phillips head body hardware, they did borrow the oversize hex head pivot from the 0300 and included some beefy torx hardware and stand offs. They also included a lanyard post, which seems redundant placed next to the two stand offs, but looks to be removable.

In hand the 0620 feels like a beefed up Emerson – not a bad thing at all. The simple handle design is Emerson ergonomics at its finest. A forward finger groove indexes the finger nicely, and the wide thumb ramp is gently jimped for control and tactile feedback. The rest of the handle is simple and accommodates a wide variety of hand sizes. The 0620 is a pretty thick knife – not amazing in pocket, but excellent in hand. After working with the 0620 for several months I haven’t noticed any hot spots. Job well done by both Ernest and ZT.

The pocket clip looks almost as if it were plucked from the Emerson parts bin – it’s a carbon copy of what you would find on the real deal, except of course for the Zero Tolerance Logo emblazoned on it. It is a blackened steel clip, much like what you would find on a Benchmade Griptilian if you have never handled an Emerson. The handle has been drilled and tapped for ambidextrous tip up carry. It’s not super deep carry, but fairly deep. The 0620 is neither small, thin, nor light, but the sturdy clip holds the knife securely in pocket. It carries well for what it is.

Deployment and Lockup

Like a real Emerson, the 0620 makes use of both a Wave and thumb disk. Perhaps the most notable point regarding the deployment is the detent – it’s very strong. While it’s possible to flick it open with the thumb disk, the detent is so strong that flecks of my thumbnail often depart with the blade. The wave works well, although frankly waves have never graduated beyond a novelty for me. ZT went with classic phosphor bronze washers for the 0620. Bronze washers are all well and good, but it would have been cool to see them put KVT bearings in like on the 05620.

I have said it before and I’ll say it again, ZT has really dialed in the lockup on their frame locks. Like the past few titanium framelocks from Zero Tolerance I have reviewed, this one comes with a stainless steel insert. Lockup is early (~30%), rock solid, and without stick or blade play. It’s perfect. The 0620 in particular inspires a lot of confidence. The blade slides in to place with a satisfying snap and I wouldn’t hesitate to use the 0620 for harder tasks if necessary. Blade centering is perfect.

Zero Tolerance 0620 Review – Final Thoughts

The 0620 is arguably the best “Emerson” ever. The 0620 is built better and finished better than a real Emerson. It lacks quirks like chisel edges, and a right side tip up carry only pocket clip, but it has been upgraded with carbon fiber, M390 blade steel, and a beefy titanium frame lock. Most astonishing is that the 0620 is still made in the USA and priced for about what a similar size Emerson would cost. Case in point: the Emerson Roadhouse, probably one of my favorite Emerson patterns retails for around $230. This ZT collab comes in a at $240, and is right at $200 if you opt for the less-fancy version with Elmax blade and G10 handle scale.

There is little to nothing I would change about the 0620. In a perfect world I’d mill out the titanium frame lock to try and lighten the knife, and possibly add bearings to make this indulgent piece even more over-the-top. These are minor quibbles. Sure, it is big and impractical for normal person daily carry, but so is a real Emerson.

Zero Tolerance has once again delivered a superior product: high quality materials, beautiful construction, and designed by a legend in the industry. I highly recommend the 0620 for Emerson fans and fans of big, well made folding knives.

Zero Tolerance 0620CF Emerson Tanto Knife

Made in the USA; Wave shaped opening feature; Thumb disk for manual opening
Reversible clip (left/right); Frame lock, hardened steel lockbar inserts
Steel: Carpenter CTS-204P, stonewashed and satin finish
Handle: Carbon fiber front, bead-blasted titanium back
Blade Length: 3.6 Inch (9.1 cm); Closed Length: 4.9 Inch (12.4 cm)

I recommend purchasing the ZT 0620 at Amazon and BladeHQ.