EDC Knives

Zero Tolerance 0609 Review

This is a reader request. Proof that if you twist my arm hard enough I’ll review the latest full titanium Zero Tolerance flipper. Only for you guys.

Buy the Zero Tolerance 0609 at BladeHQ

Buy on Amazon

The Zero Tolerance 0609 is an R.J. Martin design, and is another step in ZT’s trend of releasing smaller, more EDC friendly knives. The last R.J. Martin / ZT collab I handled was the 0600, a massive, 9.5″ framelock flipper. It was big and beautiful piece, but few people are going to want to carry a folding knife with a 4.25″ blade on a regular basis. Plus it was a $400 limited edition knife.

The 0609 is much more reasonable in its footprint, price point, and availability. When you consider that I reviewed pieces like the 0300 and 0560 only a handful of years ago, it shows how the market has evolved. Big chunky knives are losing favor to more pocket friendly offerings. Lets take a deep dive into this recent release from Zero Tolerance.

General Dimensions and Blade Details

The 0609 has an overall length of 7.4″, a 3.4″ blade, weighs 3.3 ounces, and is made in the USA. This is a good size knife, but you may be surprised to learn that the 0609 is both smaller and lighter than a Benchmade Griptilian. I think this is a great size for those wanting a full size knife, but still something thin, lightweight, and special.

The blade is a twist on R.J.’s classic drop point, found on models from his Q36 customs, to the Kershaw Volt. This particular blade has been given a harpoon and swedge, lending a more exotic, technical look to the knife.

Blade stock is thin, clocking in at .12″ (just over 3mm thick), and the high flat grind combined with a wide edge makes for a knife that slices well right out of the box. I had no problem slicing apples, and the knife absolutely decimates cardboard.

Blade steel is CPM-20CV, which is chemically similar to M390, but made in the USA by Crucible. Edge retention has been excellent and there are no signs of chipping or rolling. No issues with rust or corrosion either.

The knife has served well in its role as a high end EDC or “gentleman’s tactical” folding knife. It’s a knife that has been built for speed. I can’t help analogizing it to a sports car. It’s low-slung and has a premium feel.

Handle, Ergonomics, and Pocket Clip

The 0609’s handle is comprised of two heavily milled pieces of bronze anodized titanium. The anodization is interesting, as the bronze picks up hues of blue and purple from the oils on your skin. I think it’s a nice change of pace over standard raw titanium, but wonder how it will wear over time.

Handle construction is simple and clean. You have two simple handle pillars, and then you have the oversized See-Through Pivot (STP). The STP is an R.J. Martin creation that allows you to see through the pivot. It’s cool and different, but the draw back is you need to buy a special tool from KAI to adjust the pivot or take apart the knife. That’s a definite drawback to an otherwise practical offering from ZT. Still, the STP is one of the more interesting details of the knife.

The ergonomics of the 0609 are pretty good. The handle is long enough to accommodate a full 4 finger grip, while the textured titanium, jimped thumb ramp and spine, and finger grooves all serve to lock your hand in place. The only rub is that this knife is 1.125″ at its widest. Its very thin, making it great for carry, but less comfortable for extended use. Personally, I’m fine with sacrificing a little ergonomic comfort for a lighter and more streamlined knife, but if you are expecting this to fill the hand like an 0808, well, it won’t.

For carry the 0609 comes with a simple inoffensive pocket clip. Even the Zero Tolerance logo has been dialed back on the clip of this knife. Gone are the days of the big “ZT” billboard. Now we have “Zero Tolerance” lettered in a small and spare font. The clip offers good retention and the knife rides relatively deep in the pocket. The handle has been drilled and tapped for ambidextrous tip up carry.

In practice the 0609 carries great. It’s slim, and lightweight. You will quickly forget that you are even carrying it. The sturdy pocket clip keeps the knife firmly in place. Perhaps a deep carry clip would have been nice, but this clip is small and stays out of the way.

Deployment and Lockup

Like most ZTs, this is a titanium framelock flipper. And once again, Zero Tolerance demonstrates that they know how to put a titanium framelock flipper together. The flipper tab is prominent and lightly jimped. The blade pops open easily with either a push button or lightswitch flick. The detent is strong, and the blade rides smoothly on Kershaw’s KVT caged bearing system.

For lockup we have a titanium framelock with stainless steel lockbar insert. Lockup is early and secure. There is no play in any direction and the lockbar disengages easily without any stick. I often consider Zero Tolerance to be the best in the business when it comes to production titanium framelock flippers. The 0609 is another example of why that’s the case.

Here is a shot next to my ZT O450CF. It’s actually not much bigger than the 0450CF. Mostly it’s a wider knife than the 0450CF.

Blade centering is perfect on my knife.

Zero Tolerance 0609 Review – Final Thoughts

I think this is the most refined non-limited production ZT I have handled to date. Clearly they have listened to customer feedback, and this strikes me as an evolution of the Zero Tolerance lineup. Some people may want big chunky folding knives, but there are plenty of us who want something thin and light.

While the brand has been obviously trending towards more practical knives over the years, this 0609 strikes me as the total package. A slick R.J. Martin design, a thinly ground blade married to a lightweight and strong titanium handle, with great flipping action and solid lockup. What’s not to like? The answer is “not much”. It’s a great knife.

Even the price is reasonable. These retail for a little over $200. Not cheap by any stretch, but not unreasonable for a USA made premium pocket knife either. This is easily my favorite regular production Zero Tolerance folder to date. Highly recommended.

Zero Tolerance 0609 Pocketknife; 3.4-inch CPM 20CV Drop Point Blade with Two-Toned Finish; 3D Textured Titanium Handle, Anodized Bronze; KVT Ball Bearing Manual Open; Reversible Pocketclip; 3.3 oz

CPM 20CV premium powdered steel selected for hard use; produced by Crucible with high volume vanadium carbides and highest level chromium to ensure blade’s polish, exceptional durability and longevity
Lightweight and razor sharp, 0609 measures 4. 25 inches closed, 7. 4 inches open; it boasts a titanium frame lock with angled lock bar for secure, reliable lockup that prevents unintentional closing
A perfect EDC, the multi-faceted 0609 can aid in self- and home-defense, emergencies, meal prep, wilderness survival, job site maintenance, daily chores, recreational activities and military maneuvers
Ultimate knife is memorable gift for a spouse, co-worker, close friend, graduate, parent, first responder, relative embarking on special journey, bride or groom, generous host or extraordinary retiree
ZT knives are designed for heavy-duty use and to provide maximum strength and versatility; they are domestically produced and against manufacturing defects in material and construction

I recommend purchasing the Zero Tolerance 0609 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Giant Mouse ACE Nimbus Review

by Josh Wussow 1 Comment

Last Updated August 14, 2019
Few names in the knife world garner as much respect as Jesper Voxnaes and Jens Anso. Together, they’re a veritable dynamic duo of knife design. So, when the folks at Giant Mouse Knives agreed to send over a loaner of the pair’s new ACE Nimbus model, the clouds parted and I beheld the aura of a truly excellent EDC blade.

Buy the Giant Mouse ACE Nibus at BladeHQ

Mythical and meteorological references aside, this is a surprisingly grounded tool. Based off a venerable midcentury motorcycle, Anso and Vox drew inspiration from the “rugged, utilitarian design objectives of the Nimbus.” The Giant Mouse website hails it as their “take on a great tool knife… the kind of knife you will love to use for years to come.”

General Dimensions and Blade Details

Let’s start with the Nimbus’ centerpiece – Three inches of flat-ground Bohler M390. This beautiful blade is a full inch tall, with a thickness of 0.14 at its well-chamfered peak. The satin finish provides a glow worthy of its namesake’s Merriam-Webster definition, with beautifully etched logos on the clip side. The teardrop opening hole is rounded along its top (where your finger is most likely to make contact), though the lower edge has been left square.

Behind the blade, users will be treated to 4.25-inches of textured G-10, with stainless steel liners and a reversable wire pocket clip. The Nimbus is fairly wide through the hips, exactly twice as tall in the handle (1.1”) as it is across (0.55”). This brings the weight to a not-inconsiderable 4.04-ounces – Hefty, but not bad for a heavy-use tool.

And indeed, this is how Giant Mouse wants us to consider the Nimbus. They advertise it as “the knife you’ll want to keep in your winter coat, backpack, working jeans or toolbox.” In that vein, here’s a comparison with the two other folders I reach for when the going gets tough: The Spyderco Native 5 and Zero Tolerance 0562.

So, how does it perform? Honestly, this one took a while to grow on me. The blade felt undersized at first, struggling to straddle apples and medium sized onions. The turning point came in the form of several large bookshelf boxes from my construction trailer. These paper behemoths fell to pieces in the face of the Nimbus. Its tall edge glided through six-foot swaths of quarter-inch cardboard, almost reminiscent of a razor knife. Consider me sold.

Performance aside, there are additional advantages to a sub-3.5 blade, legality being foremost among them. From city warehouses to country cabins, it’s a knife that can go where the work is.

A few nitpicks: While I love the cutting capability, I actually feel that the blade may be a little under-branded. The ACE and Giant Mouse logos are great, but the show side has been left completely blank. I’d like to see these split, perhaps with one logo on each side, in addition to a mark announcing the M390 steel.

Handle, Ergonomics, and Pocket Clip

The Nimbus is a nice match for my medium/large hand. The humpback design creates a solid grip, especially when paired with the handle’s overall thickness. The thumb jimping is perfectly placed, just forward of the opening hole. The texturing of the G-10 is sublime, marking a nice balance between smoothness and grip. I’d compare it to the feeling of a Micarta handle from ESEE, making it a bit softer than the G-10 on the ZT 0562 shown above.

The weakest point of this ACE’s ergos lies in its lockbar. The slight scallops cut for thumb traction tend to rest in the joint of my index finger, causing a bit of a sawing effect under heavy grip. It’s not a major issue, and just mentioning it makes it sound like more of an issue than it really is. At no point did I develop a skin irritation because of this bit of texturing. Still, you’ll certainly know it’s there.

Speaking of touchy spots, take a look at the tip in the photo below. More specifically, check out how close it is to the top of the liners.

Yeesh. While it’s not close enough to catch a finger as it slides across the surface, this is my strongest criticism of the knife. A slight alteration in the blade’s angle would have dropped the point safely beneath the surface. As it is, it’s not close enough to be considered a fatal flaw. But you’ll definitely want to mind the gap, as our British friends say.

The wire clip, too, is something of a conundrum. While I’m a huge fan of its overall design and deep-carry function, it does create a minor hotspot in the palm. The pros outweigh the cons here, so I’m happy with it overall.

Let’s take a moment to talk about the internals. The folks at Giant Mouse were kind enough to allow me to take the Nimbus apart, and I’m very glad they did. Take a look at the full breakdown:

Beyond the solidity of its machining, there’s some excellent detail work here. The badging on the liners is very attractive, and obviously meant to be enjoyed by tinkerers such as myself. Then there are the washers, inset with a race track for the bearings. There’s so much to like here, and the disassembly process is relatively straightforward. My lone complaint lies in the free-spinning pivot, which requires a TORX driver on both sides for takedown and dial-in. Otherwise, this knife’s maintenance process was a breeze.

Deployment and Lockup

Giant Mouse said it best themselves: “If you are looking for a trick knife to middle-finger flick and play with during office breaks, we have other options coming in the ACE-line.” This held true throughout my time with the Nimbus.

While the finger hole is certainly capable of producing snappy opens, this isn’t exactly a fidget-friendly tool. For one, the lack of a flipper tab/blade guard makes it possible to flick the edge down onto your thumb during closure. It didn’t happen to me, but careless users may find themselves with a nick or two if they’re not careful. This isn’t something I’d consider as a flaw, especially since Giant Mouse straight up warns you that this is a function-first knife. Still, lockup is solid and satisfying, with the linerlock leaf snapping into place flush with the clip side of the blade tang.

Dialing the action in can take a bit after disassembly, due to the nature of a free-spinning pivot. But once you have the screws in right, you’re left with nothing but smooth solidity.

Giant Mouse ACE Nimbus Review – Final Thoughts

The Nimbus looks, feels, and cuts like a $175 knife – Every inch, every penny. From its excellent construction to the thoughtfulness of its design, this is a rare case where the silver linings outshine whatever troubles make up the cloud. Fans of Anso and Voxnaes will find a lot to like here, and newcomers can use it as a primer for their design philosophy. At the risk of making a pun, the folks at Giant Mouse… Well, they ACE’d it.

Giant Mouse ACE Nimbus – From $175.00
From: BladeHQ

I recommend purchasing the Giant Mouse ACE Nimbus at BladeHQ or Amazon. Thanks for reading.

GEC #15 Tidioute Boy’s Knife

by Aaron Shapiro Leave a Comment

I was just reading some statistics about Great Eastern Cutlery: in 2007 GEC produced approximately 7300 knives whereas in 2017 it’s nearly 30,000 pieces. This is remarkable in today’s hyper competitive EDC pocket knife market. That’s a 310% increase over ten years for a traditional knife company. Admittedly, these numbers are based on hearsay, but a glance at the production totals on GEC’s site show there’s some basis for them.

Buy the Boy’s knife at BladeHQ | KnivesShipFree | GP Knives

I’d like to think that the focus on traditional knives is born out of a perspective shift within the EDC community, perhaps away from the overbuilt tactical to the purpose-based smaller utility folders? It’s hard to say at this point, but just from observing the ripe secondary market it’s clear that slipjoint fever is on fire these days.

Today, we’re looking at the GEC #15 Tidioute Boy’s Knife, a well rounded and sized EDC slip-joint at a very accessible price point. Based around the traditional “Sleeveboard” pattern, these are sometimes also made into barlows with full steel bolsters. A “Boy’s Knife,” is generally characterized by their diminutive size (generally between 2.75″ and 3.25″ closed), the idea being these could be a child’s first pocket knife. These were most often spearpoint bladed pieces, but we’re seeing a lot of variety now in the modern iterations. But, before we get too far into that, let’s hit some specs:

Blade: 2.5”
OAL: 6.187”
Thickness: .43”
Blade Thickness: .09”
Steel: 1095 Carbon Steel
Weight: 1.8oz
Lock: Non-Locking Slipjoint

(These are my personal measurements made with my calipers and my faithful (pink) ruler. The manufacturer’s published numbers may vary.)

Blade

The #15 pattern by Great Eastern Cutlery is an amalgamation of several different knives they offer in the same size. I’m aware of a Wharncliffe version (Navy Knife), Wharncliffe with a cap-lifter/prybar type tool (Crown Lifter), Special Run Barlows (TC’s), and then the Spearpoint (Boy’s Knife) featured here. There are very likely other versions that I am not aware of out there, the world of GEC’s is deep and wide.

In my opinion the Boy’s Knife in spear point offers one of the more versatile blade shapes out of the GEC offerings. The blade has a straight back for nearly three-quarters of the length before descending into a fine point. GEC has also opted for a small swedge running nearly the entire length of the blade. I think that this offers a little dimensionality to what would otherwise be a very simple blade shape. In practice what I have found is that most of the knives that Great Eastern makes have very nice, thinly ground blades. Case in point, the #15’s blade I have has been taken down to .012 behind the edge… this thing screams through paper.

In practical use, I’ve found the #15’s blade to be a generally good fit for most of what I do. I think the spear point works well for piercing tasks and the thinness of the edge really excels for slicing. I wind up breaking down a lot of boxes at work and it only takes the lightest touch to break the tape.

As for steel, 1095 is a tried and true performer, high carbon, generally taken to 58-60HRC, I’ve had great experiences with it both in cutting and sharpening. It will stain or rust, so I’d suggest oiling the blade and spring with mineral oil or something similar (but not too much, some good use patina is cool.)

Handle and Ergonomics

The Boy’s Knife handle is a simple teardrop shape with micarta scales and a short steel bolster over steel liners. Construction is pinned. There are many options for scale material, but I opted for a micarta handle.

The handle offers a full grip for me, which is surprising to me since the knife appears to be so small on paper. The small teardrop shape doesn’t offer what I’d call a “secure grip,” but in the use case scenario for a small slip-joint, I tend to think this is more than adequate. When the #15 gets put to work cutting up cardboard boxes I’m careful with it as this is a smaller handle and the grip is not as secure as a full size knife.

I’d recommend a full size GEC if you intend to use the knife routinely for harder tasks like breaking down lots of boxes, but this knife is fine for light EDC use and the occasional package.

There is no pocket clip on this knife, so no need to comment on that. Often these knives are carried in leather slip sheathes. Either way this will be a small and slim carry.

Another option with this knife is to pick one up with a bail and chain. This is kind of like a wallet on a chain. It won’t walk off on you. Traditionally these bail knives were for sailors, and they continue to practical for marine applications and other times when you want to keep your knife on you.

Walk and Talk

Talking about the “lockup” on a traditional folder like this always presents a challenge, but I think it might be more applicable to talk about it’s fit and finish since those will directly relate.

The areas that are often talked about with traditionals generally are flushness of the spring and centering. I would expect a handmade custom Slipjoint to be flush in all three positions and perfectly centered, whereas I give a little grace to production knives.

The #15 is flush in the open and closed, but the spring does stick up a little at the half-stop. This would only become apparent if you stopped mid opening or closing to look at it. Centering, however, is right on the money.

Since this is a non-locking slip joint, we don’t talk about deployment and lockup. Instead we talk about “walk” and “talk”. The walk is the feel and tension of the blade moving against the spring, while the talk is the sound of the knife snapping open/closed.

The walk and talk on most GEC’s I’ve handled is pretty decent. My only gripe is that I don’t think that nail nicks are a viable method to open knives. My only interest in a nail nick is if it allows some portion of my finger to “stick” to the blade so I can pinch the knife open, and it barely functions as such on the #15. I’d love a more pinch-able blade.

GEC #15 Tidioute Boy’s Knife Review – Final Thoughts

All in all, my experiences with the GEC #15 have been very good. It’s a solid knife that performs well in the context that I think it was designed for. I think that most traditional knives perform pretty light duty tasks for everyone. Slice an apple here, open some mail there, maybe break down a few boxes as the need arises, but most of us won’t be carrying a GEC for a survival knife except perhaps as a tertiary backup to other gear. GEC’s have also maintained a good collector base, so if you’re the “Gotta Catch’em All,” type you will do well in this world.

If you are looking for a small and simple GEC slip joint, the #15 Boy’s Knife is well worth considering.

GEC #15 Boys Knife
From: BladeHQ

Editor: I recommend purchasing the GEC #15 Boys Knife at BladeHQ, KnivesShipFree, or GP Knives. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kizer Sheepdog Review

by Dan Jackson 6 Comments

Imagine you can pick out anything from Kizer‘s lineup. I was recently put in that position. Not a bad place to be. Thumbing through their catalog yields all sorts of stuff from the pedestrian to the outlandish. The Sheepdog is more in that second camp. It’s a big bold design. Not likely to dislodge something like the FRN Chaparral from your pocket, but definitely a conversation piece.

Buy the Kizer Sheepdog at BladeHQ

No products found.

The Sheepdog is a design from Chris Conway of Sheepdog Knives, and is the production version of Conway’s C01C custom knife. The Sheepdog even has “C01C” laser engraved on the blade. It’s a big and chunky offering for fans of big and chunky knives. Clearly this one won’t be for everyone, but the unique design and loyal following piqued my interest.

This knife was provided to me free of charge from Kizer. All thoughts are my own.

General Dimensions and Blade Details

The Sheepdog has an overall length of 7.75″, a 3.125″ blade, and it weighs 6.17 ounces. Right now I have the open knife resting on my chest as I type this review out on my couch. The resulting sensation is what I would expect the early onset of a heart attack to feel like. It’s a heavy pressing weight, bearing down on my solar plexus. I better move this review along before my girlfriend has to call 911.

While the Sheepdog is categorized as an EDC knife, you will need to be a fan of BBKs (Big Beautiful Knives) to tote this one around.

For those seeking something smaller, Kizer wisely decided to introduce the Kizer Mini Sheepdog a while back. As part of the Vanguard series, the Mini Sheepdog comes with G10 scales and a liner lock, but it also clocks in at a mere 3.25 ounces. I received a Mini Sheepdog from Kizer as well, but stupidly forgot to take a size comparison photo before sending the Mini over to Grayson for review. I liked the size and weight of the Mini Sheepdog and could see that making for an interesting daily carry tool.

The Sheepdog’s blade is a massive slab of S35VN stainless steel. It’s a modified sheepsfoot, with a gently curving edge, high flat grind, and dual swedges. Sheepsfoot knives generally don’t have a penetrating tip, but the Sheepdog’s leading edge is canted out slightly, resulting in a strong tip that won’t pick out splinters, but could easily blow through a hollow core door.

The blade has been nicely made. The grind lines are crisp, the edge is clean and even, and the finish is a fine stonewash. No complaints.

Given this blade is a hair over 4mm thick, I was dubious of the Sheepdog’s cutting abilities. But much like an NFL linebacker, this big boy has some moves. I started with an apple, as apples are a great test of the slicing ability of a pocket knife. A slicey knife will cut the apple cleanly, while a chunky blade will plow through it, leaving a series of fault lines in your apple slices.

Much to my surprise the Sheepdog cut the apple cleanly. It’s like a small butchers cleaver.

I moved on to cardboard. No problems there either. The S35VN blade peeled through the cardboard boxes. It eventually slowed down as the edge dulled, but the edge geometry is good and the knife cuts well. After the boxes, I touched the Sheepdog up on the ceramic rods from my Sharpmaker and we were back in business. At that point I carried the knife with me. Mostly on the weekends when I could carry a big blade like this. It performed regular EDC tasks, including opening mail and packages containing other knives, without any issue.

Handle, Ergonomics, and Pocket Clip

Handle construction is simple and elegant. At the front of the knife you have an oversized pivot with an anodized blue titanium pivot collar. Towards the butt of the handle are two stainless steel standoffs. A series of three slots have been milled into the show side, offering a little extra traction and a view inside. Not much to see except for an expanse of dully shining titanium when the knife is open, or the glinting stainless steel blade when the knife is closed.

There is something oddly cathartic to the handle of this knife. It’s a hefty piece of contoured and bead blasted titanium, and it reminds me of palming a well worn river rock.

While the Sheepdog doesn’t have much of a “traction plan” with respect to aggressive texturing or jimping, the knife has clearly been built for comfort. Your hand naturally wraps around the handle, fingers finding the grooves, and thumb sliding across the broad spine of the blade. The result is a secure and confident grip without hot spots or ergonomic issues. I had no problems using my knife during the testing period. Granted I didn’t try to break down a yak with it, but for normal utility tasks the knife worked fine. I suppose you could always slap some skateboard tape on it, dudes.

The pocket clip is not without its controversy. First of all, it’s a milled titanium clip, so by default it’s going to raise the ire of a percentage of our knife loving brethren. I’m talking about those who have sworn their swords against the recent rebel uprising of milled pocket clips. Those folks will forever condemn the Sheepdog with its milled clip as a glorified paperweight, unfit for daily carry.

I’m a little less dogmatic when it comes to this sort of thing. Yeah, I’ve handled some knives with milled clips that didn’t work, but the one on this Sheepdog isn’t bad. It has been designed in a way to produce a lot of spring tension. Spring tension is critical for the success of any pocket clip, as this is what keeps the knife in your pocket.

The pocket clip works fine. I mostly wear lightweight shorts with a triangular pocket, and like to keep my knives high in the pocket up near my belt. Nothing upsets me more than a loose clip that allows my EDC knife to constantly sink towards the bottom of my pocket. That is the worst. Thankfully we don’t need to worry about that here. The Sheepdog’s pocket clip defies gravity and keeps my knife where I want it. No small feat given how heavy this thing is. Job well done, Kizer.

Ultimately, the Sheepdog carries well for what it is, but this is still a 6 ounce+ pocket knife. It isn’t a Dragonfly. You are going to notice it. It may even pull your pants down if you forget to wear a belt.

Deployment and Lockup

The Sheepdog makes use of an oversized flipper tab to get the blade open. The flipper is a substantial piece of steel allowing the user to pop the blade open with a lightswitch stroke. The detent is dialed in, and the blade runs on caged washers. The end result is a knife with reliable and satisfying flipping action. I’d put it at a solid “7” on the 1-10 scale. It gets the job done, but this is still a big heavy blade, and you feel that in the action. There is no jimping on the flipper tab, and I don’t think it needs it. My index finger has never slipped on the flipper.

For lockup we have a standard titanium framelock with steel lockbar insert. This is much like the Kizer Intrepid I reviewed two years ago. Kizer has the lock tuned to perfection. It locks up early, there is no blade play, and the lock is easy to disengage. There is no lock stick, and thanks to some contoured edges I can easily jam my thumb in place to release the lock bar. Much like the framelocks you find on a Zero Tolerance knife, this one just works.

Here is a parting shot of my Sheepdog next to the Paramilitary 2:

Blade centering is perfect on my knife.

Kizer Sheepdog Review – Final Thoughts

The Sheepdog is not for everyone. In fact, the Sheepdog is not for most people. It’s simply too big and too heavy. Despite that this knife has been well received. After carrying one for a while I can see why. It’s well made and functional. For those who want something big and chunky, the Sheepdog could be the one.

While the Sheepdog a big chunky knife, it is surprisingly light on its feet. The blade cuts cleanly, the knife feels good in hand, and it actually carries alright thanks to an especially strong milled pocket clip. And you can’t argue with the material selection or the fit and finish. Top notch materials combined with excellent fit and finish all lend a premium feel to this knife. That’s important given its ~$200 price tag.

The end result is a big but surprisingly refined knife. It isn’t for everyone, but I suspect that those that find themselves drawn to the Sheepdog will be pleased with its performance and execution.

No products found.

I recommend purchasing the Kizer Sheepdog at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kershaw Concierge Knife Review

by Josh Wussow Leave a Comment

Dmitry Sinkevich and Kershaw are on a roll. Following the success of the critically-acclaimed Atmos, they’re leaping back into service with the Concierge – A slightly larger pocket knife boasting the same sci-fi elegance and everyday accessibility.

[easyazon_cta add_to_cart=”default” align=”center” asin=”B07BC93ML6″ cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]Kershaw Concierge[/easyazon_cta]

With an out-the-door cost of $38 at BladeHQ, the [easyazon_link asin=”B07BC93ML6″ locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Kershaw Concierge[/easyazon_link] is a compelling entry point into the mind of one of the world’s premier knife designers. Its dapper handle houses a deceptively simple blade, ready to trim the foil from your morning champagne or cut the rind from your brie at brunch. I spent a few weeks chauffeuring this knife between work and play, thanks to the generosity of the folks at Kershaw. Here’s what I’ve learned over my stay with the Concierge.

General Dimensions and Blade Details

The Concierge boasts a contoured, upswept blade some 3.25-inches in length. The stock is rather narrow across the shoulders (0.11-inches), with a hollow grind outfitted in a dapper gray titanium nitride coating. Beneath this lies Kershaw’s ever-present 8Cr13MoV steel.

Now, I won’t go too far down the steel rabbit hole, since the similarly equipped Atmos has proven to be a capable worker. I’d still like to see something like 154CM or 14C28N on Kershaw’s budget models, but at least their 8Cr runs better than most.

The rest of the Concierge’s 7.25-inches is comprised of nicely crowned G-10, within which lies a stainless steel linerlock and KVT ball bearing system. Think about that for a second – Up until a few years ago, this would almost certainly have been running on Teflon or (if we were lucky) phosphor bronze washers. As it is, this newly affordable mechanism is sandwiched in a 0.55-inch thick handle, bringing the knife’s total weight to 4.3-ounces.

Now that we’ve covered the stats, let’s take a minute to talk about the knife’s real-world usage. The long, gentle curve of the blade is well suited for daily tasks. Its hollow grind had no trouble dealing with my typical mediums – apples, onions, cardboard, envelopes, and plastic wrap. The knife came sharp from the factory, and I’ve stropped it back to life with no issues. We’ll cover the details of the ergonomics in a moment, but I’m generally impressed with the everyday ability of the Concierge.

Handle, Ergonomics, and Pocket Clip

This is a knife that’s smooth all over – Like a tactical otter, or a slippery maitre d’. The subtle swells and arcs of the Concierge’s handle are really something to appreciate, especially when examined up close. Dmitry Sinkevich is known for his sleek, futuristic designs, and his style is in full force here.

The texturing of the G-10 handles is subtle and smooth. The large, dimpled pivot screws provide an interesting focal point for eye and thumb alike, and the chamfered steel liners are easy on the palm. I appreciate the jimping on the long backspacer, as well. Beyond its ergonomic appeal, it’s another point of visual grace in the knife’s overall design.

One of the more unique aspects of the Concierge lies in its recessed pocket clip. This single tongue of steel dips below level of the rest of the handle, thanks to a pair of unique cutouts. The tip peeks just above the horizon of the surrounding G-10, allowing users to slip the knife in and out of the pocket with ease. It takes a bit of practice, but I’m a big fan of the concept here. A recessed clip translates into a reduction of hot-spots in the hand, and Mr. Sinkevich has nailed its implementation. True, this means you’re left with a non-reversible clip. But for the majority of the knife-buying audience, this should be a hit.

Deployment and Lockup

The Concierge employs some of the best fit and finishing I’ve seen on a sub-$100 blade. But once we transition into the functional realm, several budgetary bugaboos rear their ugly heads.

Let’s start with the positives. The opening action is strong, thanks to a solidly designed detent. The blade’s long flipper tab is well-ground and smooth, preferring a button-style press to the old light-switch flick. As mentioned earlier, it’s great to see a KVT bearing system at a price point formerly reserved for Teflon or phosphor bronze washers.

So, deployment is a breeze. Stowage, however, is an entirely different story. My particular test model came with some pretty significant lock stick. Even after a thorough breakdown, cleaning, and repeated application of graphite and Sharpie, it’s still not a terribly smooth process. Combine this with the rather thin (though well-chamfered) lock bar, and you’ve got a recipe for tenderized thumb meat.

This removes much of the fidget-factor that made the Atmos so appealing. I’ve spent a decent amount of time messing around with the Concierge, and the lockbar hang-up isn’t as bad as it used to be. But, at least on my test model, the stickiness took some of the fun out of the experience. It’s a shame, especially given the KVT bearings and the perfect position of the flipper tab.

There’s also an odd note of metallic chatter upon closure, most noticeable between the disengagement of the lock and the blade tang hopping up over the detent. This is a minor issue, and I’m not concerned about the mechanical soundness of the lock system. But, it’s a small annoyance not present on the cheaper Atmos.

Kershaw Concierge Review – Final Thoughts

By this point, my preference should be clear – I ditched the $150 ZT0450 in favor of the Atmos, and the Concierge (while certainly a nice knife) isn’t going to kick its smaller cousin out of the collection. This is largely due to personal aesthetic (I prefer the uncoated blade), but the lock stick comes into play as well.

Minor production hang-ups aside, I still think this is an excellent knife. The recessed pocket clip and upscale aesthetic alone are enough to warrant the price of entry. I’d advise potential purchasers to adopt the try-before-you-buy attitude, in order to avoid picking up a model with the same lock stick issue I encountered. But, this is another strong collaboration between Kershaw and Dmitry Sinkevich. It’s a solid option at a respectable price, especially if the Atmos is too small for your palm.

[easyazon_block add_to_cart=”default” align=”center” asin=”B07BC93ML6″ cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

Editor: I recommend purchasing the Kershaw Concierge at [easyazon_link asin=”B07BC93ML6″ locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Amazon[/easyazon_link] or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Giant Mouse ACE Biblio Review

by Aaron Shapiro 6 Comments

Wandering the hallowed halls of BladeShow in Atlanta can be an overwhelming and even intimidating experience. Knives are (not literally) being thrown at you right and left and it’s difficult to remember what you’ve seen, what you wanted to see, and what you haven’t been able to find yet. Several things stuck out to me during my time in Atlanta and high amongst them was the Giant Mouse ACE Biblio.

Buy the Giant Mouse ACE Biblio at BladeHQ

For those of you who haven’t heard of the Giant Mouse brand before, it is a collaborative production brand between custom knife makers Jens Ansø and Jesper Voxnaes; with the mission to design the highest quality production knife possible at the most reasonable price point they can. Over the past couple of years, I have had the opportunity to handle several knives from GM, but this was the first model that they produced with an ambidextrous clip which I need as a lefty.

The ACE line from GM is an unlimited production run of knives whereas the pure Giant Mouse lines are limited in production to 400 pieces per model. Currently, GiantMouse is offering two different models under the ACE umbrella, the Biblio (reviewed here) and the newly released Nimbus.

But first, as always, some specs:

Blade: 2.75” (with a cutting edge around 2.5”)
OAL: 6.75”
Thickness: .585”
Blade Thickness: .119”
Steel: M390
Weight: 3.8oz
Lock: Liner Lock

(These are my personal measurements made with my calipers and my faithful ruler, manufacturer’s published numbers may vary.)

Blade

The Biblio’s blade can best be described as a nicely bellied Wharncliffe. The blade has an ascending angle from the handle and terminates at a nice fine point. A nice thing about this shape is that when the edge is flat on a surface, the handle is raised above, allowing you to utilize the full length of the cutting edge without your hand interfering.

GiantMouse opted for a full flat grind as well, making this a pretty great utility slicer equally at home in the kitchen or campsite (not that these two need be separate). It’s ground thin and sharpened well straight from the factory. One last detail, GiantMouse has chosen to crown the spine on the blade, as I’ve stated countless times before this is a GREAT way to class up a knife.

The steel choice of M390 comes as an expected choice—the GiantMouse Knives are made in Maniago Italy by, I assume, Lionsteel who uses M390 in a lot of their models (Editor: I think Viper makes it, but I could always be wrong). I personally love this steel, it’s elementally similar to 20CV but manifests a finer grain that becomes apparent once you start sharpening it. I’ve always big a huge fan of M390 and request it whenever possible in custom orders. It’s been a solid performer, is very stain/wear resistant, and holds an edge well.

Handle, Ergonomics, and Pocket Clip

GiantMouse has opted to offer two handle material options for the ACE Biblio, either black G10 (which is accompanied by a satin blade finish) or green micarta (which comes with a stonewashed blade) both of which offer a nice grip and texture. The lines of the handle really lend themselves to locking into the hand, however, I do find that the grip itself is a little on the shorter side, with my pinky falling off the end—this is fixed if I choke up on the knife and utilize the large choil on the blade.

The clip is a simple wire clip that has the option for either “handed” carry. This is a simple method, but effective and has worked fine for me.

In the pocket, the GM is a squish on the thicker side, but being a liner lock you can’t expect much different. The ACE Biblio is far from the worst offender in this category.

Deployment and Lockup

I’ve always thought that having two different deployment methods on a knife generally meant that one took priority over the other. The Biblio, for example, has both an opening hole and a flipper tab but the detent is tuned for the flipper making it relatively difficult to open via the hole. That being said, using the flipper the action is smooth and snappy as expected with bearings.

The Biblio features your typical liner lock situation here, with a small bevel on each side of the lock to allow ambidextrous unlocking. My example engages fully, is solid in all directions, and hasn’t required any adjustment.

Giant Mouse ACE Biblio Review – Final Thoughts

Generally speaking, I think the GiantMouse project as a whole is a great exploration in what happens when two prestigious custom knife makers explore the production side of the knife-world without simply licensing a design or offering a mid-tech. Giant Mouse is a sole entity that operates within the design language of both Anso and Vox.

While I think that limiting the production runs of the of the GiantMouse offerings seems like a play for extrinsic value, it is nice to see that they have adopted an unlimited production run of affordable options.

The Biblio seems like a great choice for anyone that’s a fan of these two specific knife makers, wants a high-value option, or is looking for something that’s a little outside the “canon of normal knife brands.” The ACE Biblio is available (in Black G10) from BladeHQ for $175, and if you think about that… You’re getting an M390 flipper, designed by two well-respected makers, made to the exacting standards of (again what I assume to be) Lionsteel, for less than $200. Pretty hard to beat that these days, in my opinion.

Giant Mouse ACE Biblio – From $175.00
From: BladeHQ

I recommend purchasing the Giant Mouse ACE Biblio at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.