Made in Japan

Fallkniven U2 Review

They say less is more. That is, until, less becomes less. That is the question with the [U2, an ultra minimalist blade from Fallkniven. The U2 is about as simple of a knife as you could ask for. A slim, refined folding lockback with plain black handles, a gleaming laminated blade, and just enough hardware to hold it all together.

Buy the Fallkniven U2 at BladeHQ

Buy on Amazon

I’m no stranger to Fallkniven’s minimalist approach. I have found it works wonderfully in the context of a fixed blade and I have enjoyed their A1 and F1 tremendously. So the time has finally come to examine this little U2, which is arguably the brand’s most popular folding knife, and is marketed as the first folding knife with a Super Gold Powder Steel (SGPS) blade.

General Dimensions and Blade Details

The U2 has an overall length of 5.9″, a 2.52″ blade, weighs 1.5 ounces, and is made in Japan. This knife is made for Fallkniven by Moki. There really is not much to this knife. Oddly enough, when the U2 first arrived I was most surprised with how small the box was. It was not much more than a matchbox. Needless to say, but the U2 is extremely lightweight and eminently pocketable.

The blade of the U2 is a simple drop point with full flat grind. There is no swedge or distinguishing feature, save for the ambidextrous nail nicks, laser etched Fallkniven logo, and demarcation between the steels of this laminated blade. This is about as simple as it gets. The tip is capable enough for household chores and there is a slight belly to the blade.

Fallkniven selected a laminated blade with VG10 cladding, and a Super Gold Powder Steel (SGPS) core. I discussed this steel a little in my review of the F1, but this is my first experience with it. On paper SGPS is a very interesting steel. It is heat treated to 62 HRc, and is sold at a serious premium on the F1 series.

In practice my initial reaction to the cutting ability of the U2 was underwhelming. This is a thin and sharp blade out of the box. I expected laser like performance on cardboard, but my knife was hanging up on something when I tried to cut with it. Don’t get me wrong, it cut, but it wasn’t the silky smooth performance I was expecting from a knife like this. In performing a little research for the review I realized that I was not alone, and the knife benefited greatly from a re-profiling.

I’m no expert at re-profiling, but I first attempted to “relieve the edge” a little with the 30 degree feature of my Sharpmaker. That didn’t give me the result I was after, and I ended up running it on the diamond stones of DMT Aligner. Now the U2 responds a lot better to cardboard, paper, and other fine slicing tasks. The blade stock is very thin, and so is the grind, but for whatever reason I needed to spend some time tweaking the edge before I could realize the knife’s full potential.

I found edge retention to be merely “OK”. I’d say it was a step up over VG10 and AUS8, but not leaps and bounds ahead. When it came time to touch up the edge on the rods of my Sharpmaker, it came back without a ton of work. I would place this steel above VG10, but I would not put it on the same level as ZDP-189 (at least in terms of edge retention). I had zero issues with corrosion resistance.

Handle, Ergonomics, and Carry

The handle of the U2 is injection molded Zytel, a high density plastic resin. It is lightweight, strong, and functional. However, fans of more substantial knives (including those that dislike the “plasticy” feel of the handles on the Griptilian) will likely not be a fan of the U2’s handle. Personally, I don’t mind the plastic feel of the handles. I have owned a number of zytel handled knives in the past, and have never had a problem.

However, this is one aspect of the knife that is tough for me to describe, and I don’t think pictures do a great job conveying the feel of the handle either. I will say the handle is nicely finished. The edges (save the inside edges) are nicely chamfered. There is as generous lanyard hole, and the pivot screw and single rivet give the knife a clean appearance.

The handle of the U2 is just big enough for me to get a full 4 finger grip on. Any smaller and this would become a 3-finger knife. I take an XL glove, so this handle should work for most people. There is no jimping to speak of on this knife. Not a bad thing if you ask me. The inside edges of the handle are a little sharp, but I otherwise found the U2 to be comfortable. The handle itself has a light texture to it. This isn’t a high traction handle, but it’s fine for normal tasks.

The U2 doesn’t have a pocket clip. The nice thing about the plastic handle, is that I have absolutely no reservations in dropping this knife into my pocket with my keys, loose change, etc. It wears well and I have zero concerns of marring the finish. At 1.5 ounces it is like carrying an Alox Cadet. You don’t notice the knife until you need it.

Deployment and Lockup

The U2 is equipped with dual nail nicks. These are generous nicks and they make it easy to open the knife. It is possible to open the knife one handed with a little finger gymnastics, but this was designed to be a 2 hand opener. At any rate, I have no issue with the nail nicks, but I did have an issue with the gritty and noisy pivot. I thought that was strange. I couldn’t see if there were washers inside the handle, so I ended up disassembling the knife and found that there were no washers. It’s metal on plastic.

I don’t need each knife in my drawer to be “Sebenza Smooth” but even my $20 Swiss army knife is smoother than the U2. For me that is a bummer and is one of my least favorite aspects of the knife. Bronze or even teflon washers would be welcome here like WD-40 on the hinge of a squeaky door.

For lockup we have a tried and true lockback mechanism here. The lock on the U2 is sturdy, although this isn’t a knife that I am going to start prying with. The blade snaps crisply in place, is free of play, and disengages with a press of the thumb. The lockback is perfectly fine for this kind of knife. I will say that the tang of the blade and the backspring of the lock do not have a particularly good transition. There is a noticeable “jump” between the 2 pieces of metal. Not a big deal for a user knife, but this is something I usually notice on a slip joint or lockback folder.

My blade is just a touch off center. Nothing rubs.

Fallkniven U2 Review – Final Thoughts

Frankly I am a little torn with the U2. Having had good results with Fallkniven’s fixed blade knives I was excited about finally acquiring the U2. It has generally received good feedback from Amazon and several other reviewers I respect, and I have been enjoying traditional knives and gentleman’s folders. So I thought I would really take to this one.

While I appreciate the practicality of it, I was disappointed by some aspects of the finish work of the knife. The edge required a good amount of tweaking to cut the way I wanted it to, I wasn’t blown away by the Super Gold Powder Steel, and the pivot and action of the knife is gritty thanks to the washer-less design.

On the plus side, it’s lightweight, pocketable, and cuts well once you get it profiled correctly. I think that it can be good as an urban carry or back up piece. So it really depends on what you care about. If you trend towards being anal retentive, then there are quirks with the U2 that may make it a deal breaker. If you are looking for an ultra-light, no-frills, EDC knife without a pocket clip, then it could be the perfect tool.

For my money, I would recommend either the Spyderco Dragonfly, Pingo or the Victorinox Cadet before the U2. I honestly like them more than this knife, and they are all significantly less expensive.

3D Peep Sight Fallkniven U2 Gemini Folding Knife

Closed length: 3.85 inches
Blade length: 2.52 inches
Blade material: lam.Sgps
Blade edge: plain
Point: drop point

With that said, if you are in the market to buy a U2, I recommend purchasing it at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Al Mar Mini SERE 2000 Review

by Dan Jackson 8 Comments

Last Updated: August 9, 2019
The SERE 2000 is one of the more iconic folding tactical knives of our time. The knife was originally designed in the 80s by Al Mar and Colonel Nick Rowe for the Army’s SERE (Survival, Evasion, Resistance, Escape) school. The fact that you can even still buy the knife is a testament to the efficacy of the design.

Buy the Al Mar Mini Sere 2000 at BladeHQ

Buy on Amazon

As an enthusiast of modern folding knives, I have had my eye on the SERE 2000 for some time. It’s one of those “cornerstone” tactical knives like the Paramilitary 2 and Benchmade 710 that I feel almost obligated to try (twist my arm).

So why the hell would you buy the miniature version? Good question. I guess if you want “tactical” but are forced to be a little more “practical” then the Mini SERE 2000 (or MS2K) could be the knife for you. This is taboo in some circles, kind of like buying a 4 door Porsche. But I’m a sucker for compromise, and I got a good deal on this MS2K, so that’s why the mini version is the subject of today’s review.

General Dimensions and Blade Details

The MS2K has an overall length of 7″, a 3″ blade, and weighs 3.5 ounces. Compare that with the full size SERE 2000 with an overall length of 8.5″, a 3.6″ blade, and weighing in at 6 ounces. I have enjoyed the Mini SERE 2000 as an every day carry (EDC). Having never attended SERE school, I couldn’t really tell you the merits of this folder in a Survival, Evasion, Resistance, or even an Escape capacity. I helped a couple hot dogs escape from their package the other weekend with the MS2K, if that counts for anything.

The SERE 2000 has a modified drop point / spear point blade with a mid height flat grind and a large flat ground swedge. This is a classic Al Mar profile that has shown up in a variety of their offerings, including the Eagle and Falcon lines. This simple blade shape is a good all round performer, combining excellent piercing capability with strength and slicing performance. Al Mar offers the blade with a satin finish or a black ceramic coating. I really like my satin finished blade – it has been beautifully done with crisp grind lines, an even finish, and a neatly applied edge.

The SERE 2000 comes in VG-10 blade steel. This was probably a great choice when the knife came out 20 years ago, but is only OK by today’s standards. These days there are a number of higher end steels, especially at the price point the MS2 is offered at. The SERE 2000 is made for Al Mar by Moki Knives in Japan, and VG-10 is made in Japan, so that makes sense.

Practically speaking, the knife is capable of getting screaming sharp and it slices well. The tip strikes a nice balance between strength and precision. VG10 is very easy to maintain. I tend to strop my MS2K and I occasionally run it on the fine stones of my Sharpmaker. I have had zero issues with corrosion or chipping. However, I would not complain if they upgraded the steel to something more wear resistant, especially given the price of this knife.

Handle, Ergonomics, and Pocket Clip

The SERE 2000 features a no-nonsense handle design with black, O.D. green, or digi-cam G10 handle scales over full steel liners with a combination of stand offs and a small stainless steel backspacer. The handle is immaculate. The finish work is seamless, replete with satin hardware and lightly chamfered edges. I can’t feel a single crack or seam as I run my thumb over the backspacer that bridges the G10 scales and steel liners – a hallmark of excellent finish work and a close attention to detail. Although the liners are not skeletonized, the knife feels light and reasonable for its size. All told I am very impressed with the build quality of the handle.

The MS2K was originally designed to be a much larger knife. I am guessing the mini version was an afterthought to appeal to a broader audience, and it is simply a scaled down version of the full size SERE 2000. I am pleased to report that the ergonomics of this design translate well to a smaller knife – another testament to the universal appeal of the original SERE 2000.

There is just enough room for me to get a full four finger grip, and my thumb perches nicely on the spine of the blade. This is a relatively thick knife, and it fills the hand. The chamfered edges are extremely comfortable and melt into your skin. The flared handle contributes to the MS2K’s signature profile, and also helps ensure your fingers don’t slide around on the knife. There is no jimping, but the thumb perches nicely on the spine of the blade. The knife is also comfortable in a reverse grip. I found this to be a good working knife, and had no real issues with hot spots even after a couple intense encounters with rope and cardboard. This handle ascribes to a KISS (Keep It Simple, Stupid) mantra, and the end user is all the better for it.

The deep carry pocket clip has been given a glossy black coating. It allows for ambidextrous tip up carry. I like this relatively discrete clip design. It is a really tight clip and butts up to high traction G10. There is definite potential for pocket tearing, so keep that in mind. The clip provides very good retention and generally functions well. Being a knife with a relatively thick blade, full steel liners, and thick G10 handle scales, it’s a little thick in the pocket. Still, the knife carried fine for me, and I didn’t really notice it.

Deployment and Lockup

The Mini SERE 2000 has ambidextrous thumb studs, teflon washers, and a liner lock. The thumb studs are accessible on both sides of the handle, but the knife is designed primarily for right hand users. The teflon washers make it impossible to flick open, but it’s a very smooth knife.

The liner lock engages early and securely. Like my Sage 1, the MS2K makes a distinctive “chirp” as you snap the blade into the open position. There is no blade play in any direction at all. Blade centering isn’t perfect on my knife, but it’s close.

I also like how the tang of the blade has been rounded off at the spine, so the knife looks just as good closed as it does open. It’s this attention to detail in the design and execution of the knife that gets me excited about the SERE 2000.

Mini SERE 2000 Review – Final Thoughts

When it comes down to my final thoughts on the Mini SERE 2000, I am a little conflicted. On one hand it’s a beautiful knife. It’s well made, balanced, with decent materials, and it’s very practical. It is an excellent knife. But on the other hand we are talking about a Japanese linerlock with G10 handles and VG10 steel with a retail price at $200+. For $150 I would recommend it without reservation. But at an actual retail of $200+ it is much harder to give this the fullest of endorsements. This isn’t because the SERE 2000 is a bad knife – it isn’t. It’s a wonderful knife. My problem with it is that I think that there is more out there at a better value.

Case in point, the Spyderco Sage 1 is another linerlock folder with 3″ blade, similar fit and finish (maybe not quite as good, but close), and better blade steel. The Spyderco Caly 3 is a beautiful Japanese folder with laminated ZDP 189 blade, real carbon fiber handle scales, and equally impressive fit and finish to the MS2k. At nearly twice the price of both the Sage 1 and Caly 3, I have a real hard time recommending the SERE 2000 carte blanche. It’s still a beautiful knife, just spendy.

It is also worth noting that the full size SERE 2000 is only a couple dollars more than the Mini. It might also be easier to justify spending the money on the full size version, especially if you are going to rely on it every day as a member of the military or law enforcement.

If you can get past the price the SERE 2000 is worth acquiring. It’s a timeless folding tactical knife, and fans of the genre owe it to themselves to at least check it out eventually.

Al Mar MS2K Mini Sere 2000

4 inch closed linerlock
Satin finish VG-10 stainless spear point blade with dual thumb studs
Textured black G-10 handles with black finish Reversible stainless pocket Clip
Lanyard Hole

I recommend purchasing the Mini SERE 2000 at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Fallkniven F1 Review

by Dan Jackson 10 Comments

Last Updated: September 25, 2018
I am not sure if I have the patience for a compact survival knife. I tend to favor a brute force approach when working in the outdoors. Maybe I am lazy, or stupid… or lazy and stupid… but when in doubt I often find myself reaching for the biggest, heaviest tool I can find.

Buy the Fallkniven F1 at BladeHQ

Buy on Amazon

That’s probably why I get such a kick out of knives like the Junglas and Ontario Machete. I get that heavy piece of steel in my hand and say, “Hey, I can probably chop down a tree with this thing,” and then proceed to blast whatever lies in my path. Hours later my shoulder is aching, my shirt is soaked through with sweat, but I still have a smile on my face. What I lack in technique I try to make up for with pure stubbornness. I have the same problem when I go fishing.

So I may not be the best guy to review the Fallkniven F1. It’s an elegant smallish fixed blade designed in Sweden, and made in Japan. The Scandinavians are folks who really seem to appreciate the great outdoors. The Japanese are extremely passionate about pretty much everything, and have an extraordinarily rich culture of blademaking. Both have a zen like approach to nature (and life) that I could never match.

I have previously reviewed the Fallkniven A1, and offhand the A1 seems to be more my speed. It’s not a big chopper, but it’s a meaty knife and a solid performer. The F1 is much smaller, and working with it has forced me to slow down for a moment, explore the possibility that less is more, and, god forbid, try to cultivate some technique when using my tools.

General Dimensions and Blade Details

The F1 has an overall length of 8.3″, a 3.8″ blade, weighs 6 ounces, and is made in Japan. Fallkniven calls the F1 the Pilot’s Survival Knife, and this is the standard issue fixed blade for the Swedish Air Force. So this is a knife that presumably needs to be small enough to fit on your person while in the confines of a military aircraft, yet be effective enough for soldiers to rely on worst case scenarios like a downed airplane deep behind enemy lines. For us civilians this could be a camp knife, or a knife for hiking, hunting, and exploring the great outdoors.

Here is a shot of the F1 next to the S1 and A1. The F1 is of course on the bottom:

The blade of the F1 is a simple drop point with a full convex grind. The blade shape is simple. There are no organic shapes, no swedges, no jimping. Just traditional drop point awesomeness with your choice of a bright satin finish or a black CeraKoted blade. This is about as simple as it gets.

Blade thickness is a generous 4.5mm, and this combined with the full convex grind allows the F1 in some ways to function like a larger knife. I adore the convex grind. It can be used to pop open small pieces of wood, yet it cuts deeply into material and can be used for more detail oriented tasks.

The F1 features a laminated VG10 blade. Twin slabs of 420J stainless flank a VG10 core (also stainless). 420J is tougher than VG10, whereas VG10 is harder and better for edge retention than 420J. The idea is to combine 420J with the VG10 to make an overall tougher knife with the edge holding qualities of VG10.

Using VG10 for a survival knife is a hotly contested issue. I have found that VG10 is fine for little EDC knives like the Dragonfly 2, but if you troll the forums there is great debate as to whether it is an appropriate choice for an outdoor fixed blade.

Personally, I think that this is an instance where geometry makes the biggest difference. The convex edge gives the VG10 greater resilience and durability, and belies it softer qualities. Still, you need to be careful with this knife. If you are batoning with it, make sure you aren’t batoning on top of sand or a rock pile or something. Put a piece of wood underneath whatever you are trying to cut and understand that if the edge comes in contact with a rock, the edge will likely lose. With this strategy in mind, I have not had issues with the edge on any of my Fallkniven knives chipping out.

Here is another size comparison with the F1 next to the ESEE-3:

As far as edge retention is concerned, I have found that the VG10 blade holds up well to wood and meat. It doesn’t last as long when cutting fibrous materials like cardboard. Sharpening is very easy. I mostly strop the knife, and occasionally freehand the edge with a fine Sharpmaker stone. I know that the sandpaper and mousepad method is a popular way to sharpen a convex edge.

Fallkniven also offers this knife in their “3G” configuration. 3G is another 420J laminate with a core of Super Gold Powder Steel (SGPS), a high end powdered steel by Japanese manufacturer Takefu. They heat treat the SGPS to 62HRc. By way of contrast the VG10 version is taken up to 59HRc. The main benefit to the 3G version is it gives you greater edge retention. Apparently durability is about the same although I have no hands on experience with this version of the knife. The downside is that the 3G version retails for $100 more than the F1.

Personally, it was not worth the extra money to spring for the 3G version. If I used this knife every day I could see where the upgraded version has its appeal. I look forward to checking out the SGPS in depth when I eventually pick up a Fallkniven U2.

Handle and Ergonomics

The F1’s handle is made of Thermorun, a high density plastic. Thermorun has a slightly rubbery feel to it, and the handle all but completely encases the tang of the knife. About an 1/8″ of tang sticks out from the pommel, which can be used for hammering/crushing things. There is also a large sleeved lanyard hole that easily accommodates 550 cord. The handle has a strong diamond texture on the sides, while the top an bottom of the handle are left untextured.

All said construction of the handle is very simple and solid. I can’t detect any gaps in between where the handle and blade join together. There has been no cracking splitting has occurred after months of ownership and use. Like the rest of the knife, the handle has a very basic and utilitarian feel to it.

The F1 is a comfortable knife to use. The diamond texture helps lock your hand in place, and the broad flat spine is perfect for your thumb. The handle shape is simple and it will accommodate all sorts of hand sizes. There is no jimping. I mostly tested the F1 on wood, cardboard, and by trying it out with some light food prep. At all times I felt comfortable and in control of the knife. There were no issues with hot spots.

Sheath

The F1 comes with a plastic or leather sheath. Shown here is the leather sheath, although the plastic sheath is essentially a scaled down version of the sheath on my A1, so you can check that review out to get a little more information on Fallkniven’s zytel sheathes. The leather used for this sheath is thick, sturdy, and exudes quality. It’s a high quality no-nonsense sheath that has been finished simply. The belt loop is non-removable and the blade is held in place with a fold over button clasp. The blade doesn’t rattle or move around at all inside the leather sheath. It’s very secure and a nice option for people who prefer a more traditional belt sheath.

When I reviewed the A1 2 years ago I ragged on the plastic sheath a little. I felt like the sheath was a little flimsy, especially when paired with such a sturdy knife. The blade also rattled around in the sheath, which some people use as a metric to for sheath quality (this is kind of stupid when you think about it, although I’m guilty of pointing out whether the blade rattles in the sheath).

Opinions are subject to change and mine has evolved over the years. While Fallkniven’s plastic sheathes are lightweight, it doesn’t mean they aren’t of high quality. The plastic on my A1’s sheath has held up tremendously well and is very light and practical. Apparently it is a good choice for cold climates and will perform better than a leather or Kydex sheath in sub-freezing temperatures. Since I live in Florida I have been unable to really test that out.

Fallkniven F1 Review – Final Thoughts

You don’t have to be a level 10 bushcrafter to realize that this is a very nice knife. The F1 strikes a good balance of being lightweight and manageable yet high performance. The convex blade works miracles with wood, and the handle does a great job of not getting in the way. To me that is what makes an ideal working knife. It should not be a chore or an obstacle in your path – you should be able to actually use the thing. The F1, much like the A1 when I reviewed it, seems to invite use.

I may still favor the bigger knives for my outdoor exploits, but The F1 is an all around performer and a pleasure to work with. This is an excellent knife for camping or survival and has rightfully earned its reputation as a no-nonsense tool. It has also earned a spot on my recommended survival knives page, which is about as high of an endorsement as I can offer.

Fallkniven F1, Thermorun Handle, Plain, Zytel Sheath

8 1/4" overall.
3 3/4" laminate VG-10 stainless drop point blade with satin finish.
Black checkered Thermorun elastomer handle with visible tang end and lanyard hole.
Country of Origin: Sweden
Includes Black Zytel sheath.

I recommend purchasing the Fallkniven F1 at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Fallkniven A1 Review

by Dan Jackson 26 Comments

Last Updated: September 22, 2018
When I was a child I had the experience of packing up and shipping off half way around the world. The destination was Sweden, and I couldn’t have been more than 5 years old. My family stayed in Stockholm for 3 months in the summer as part of my father’s work. I don’t remember much. Gray clouds, a day that never ended, red horses, the churning belly of an old wooden sailboat, blue and yellow. Three months of existence now just fleeting memories of a time and place.

Buy the Fallkniven A1 at BladeHQ

Buy on Amazon

It would be unfair to pretend like I really know anything about this country yet old experiences still rise to the surface like a whale cresting on the Norwegian sea. But, deep down I feel like I have some connection to this country. Some shared history.

In many ways the Fallkniven A1 typifies what this Yankee would view as the ultimate Swedish survival knife. Hefting this thing I can just imagine gently padding along Sweden’s forest floors. You can immediately tell that this knife was meant to be used, and it was meant to be used hard. And then there is that Scandinavian design. It’s charming in it’s simplicity, yet the knife has real weight to it. The Fallkniven A1 is definitely a knife where style and substance go hand in hand.

General Dimensions and Blade Details

The A1 has an overall length of 11″ (280mm), a 6.3″ (160mm) blade, and it weighs 12 ounces (305g). As I mentioned earlier, there is a real feeling of heft here. When I compare the A1 with my Cold Steel SRK there really is no comparison – the SRK feels like a toy. Fallkniven describes the knife as “semi-large” and I’d say that works well enough for me.

This is a medium size survival knife. It would work fine around a campsite or taken along on hikes or excursions. Of course it would be at home in a survival situation or bug out style scenario as well. My review protocol mostly involved screwing around with the A1 in my back yard.

The blade is a modified drop point design with a generous sweeping belly and swedge for improved tip strength and penetrating capability. The 6mm thick stock is partially flat ground and terminates in a convex ground edge. It’s really worth making a point to say that the cutting performance of this knife is extremely impressive. I have not had much experience with convex edges up until this point so I wasn’t sure how much I would really like it. The A1 came exceptionally sharp out of box working through a sheet of paper as if it didn’t exist.

This knife reminds me of an NFL linebacker. It’s heavy, but it can move when it needs to. It wasn’t long after the A1 arrived that I was in my back yard working through a large felled branch. I’d love to say I took this knife up into the mountains for an extended trip, but the truth is I’m currently trapped in a Florida suburb where retirees flock for the mild winters and early bird specials. So instead of temperate hardwoods I worked with native sea grape, palm fronds, and even treated lumber. The A1 took devastating chunks out of anything I put it too. The cutting performance is frankly unlike anything I have previously evaluated and truly needs to be experienced to be fully appreciated.

The knife doesn’t quite have the forward heavy weight of a true chopper like the Ka-Bar Kukri Machete, but the knife could definitely get some chopping done and batoned like an absolute champ. The wedge like geometry of this blade pounds through wood with ease. If batoning matters at all to you I think you will be extremely pleased with the A1’s performance.

At this point I want to talk about the steel. Fallkniven uses a laminated steel for many of their fixed blade outdoor knives. Their laminate features a 420J outer cladding with a VG10 core. The VG10 is hardened to 59 HRc and I had my concerns as the steel sometimes has the reputation for being brittle, especially when compared with a high carbon like 1095 with a much softer heat treat. The geometry of the knife makes all the difference and VG10 held up phenomenally under use. I had no issues with chipping whatsoever, although I made a concerted effort to not chop or baton into sand or rock. The knife stayed extremely sharp throughout my testing. When the edge finally dulled on some heavy cardboard I found that gently stropping worked well for me. The edge is easily restored to factory sharpness, which was great to see.

A benefit of selecting a stainless steel is that the knife will hold up in wet and snowy conditions. It’s an interesting departure from many of the outdoor knives I have previously tested, but I was extremely impressed by every aspect of this knife’s performance. I found my arm tiring well before the edge did and feel that the performance of this knife is a testament to the extremely smart design. To get a blade this stout that cuts this well is really pretty amazing.

Handle and Ergonomics

The handle on the A1 is constructed of kraton, a semi-rubbery high density polymer. The A1 is a full tang knife and the thick laminated stock pokes out through the handle. Overall, handle design and construction is simple, with a single forward guard and a lanyard tube inset near the pommel.

In practice I found the handle of the A1 to be extremely comfortable. I had no issues with slipping or hot spots after extended use. Kraton has a nice tackiness to it (very important for chopping) and the grip has been accentuated by some fine diamond-pattern texturing. The handle is thick and provides plenty of support, while the rubbery Kraton absorbs some of the shock from hard pounding.

Sheath

This particular model of the A1, is technically the A1z. The “z” is used to designate the Zytel (polymer) sheath that the knife shipped with. Fallkniven also offers the A1 with leather (A1L) and lefty sheath configurations. The sheath is simple and lightweight. Next to the knife itself it feels a little flimsy, but those who are weight conscious will probably appreciate it. I went for the polymer sheath because I feel it has several advantages: they are easier to clean, and won’t react adversely to water or freezing temperatures. I like that the sheath holds the knife in securely, has a drain hole, and allows, for easy one hand insertion and removal. It has a simple belt loop and hangs easily and freely. It’s simple, but it gets the job done.

That said, it would have been nice to see a few more frills with this sheath. The belt loop requires you to remove your belt to put the sheath on or take it off your belt – there is no quick release with velcro and/or snap closures. There are no options for horizontal carry and no integration with a tek lock. To be completely honest I am fine with the way the sheath is, but a couple more options would have been nice. As it stands the sheath earns passing marks.

Fallkniven A1 Review – Final Thoughts

The A1 is a knife that needs to be experienced to be fully appreciated. The sleek and simple look belies a true performer. It’s all in the convex grind and meaty slab of steel and the knife just cuts. You can tell the folks at Fallkniven know their way around a knife as the A1 feels so “right” in the hand. Sometimes I find knives can get in the way of themselves, or really need good technique to be effective. The A1 is not one of those knives (although technique is always important). If you haven’t experienced a knife of this size with a convex grind, you are in for a serious treat.

As for the potential negatives, well, if the A1 had a weak link in my book it would be the sheath. The sheath totally works and calling it a “weak link” isn’t entirely fair, but it is relatively flimsy and spartan on options. It is nice and lightweight however. It has also held up well in my use, and easily gets the knife from A to B. It’s a high performance sheath, but I wouldn’t turn down a more heavily built option with additional bells and whistles. Maybe that is where my feature-obsessed American nature clashes with the elegance and restraint of Scandinavian design.

All things considered I am thoroughly impressed with the Fallkniven A1 and highly recommend it. It’s a beautiful knife and it cuts exceedingly well – what more could this Yankee ask for?

Sale

Fallkniven A1 Fine Edge Fixed Blade Knife, Black

Blade material: lam. Vg10
Blade length: 160 mm
Total length: 280 mm
Zytel sheath included

I recommend purchasing the Fallkniven A1 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews, and keeps this review train running. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Dragonfly II Review

by Dan Jackson 21 Comments

Last Updated: March 29, 2020

Back in the day, I didn’t think I would like the Spyderco Dragonfly 2. I’m a big guy, and tend to carry medium size folding knives. I always felt that I would be under-equipped with a small knife. Maybe it’s a macho thing, I really don’t know. I like a good size knife. Something I can use comfortably.

Buy the Spyderco Dragonfly 2 at BladeHQ

No products found.

So the thought of packing a massive 5-7/16″ folding knife with me that weighs a whopping 1.2 ounces wasn’t super appealing. That is, until I got my hands on the Dragonfly II. It took me about 2 seconds to realize how badly I had underestimated this little knife. It punches well above its weight, and is one of the best EDC knives on the market. I originally wrote this review back in 2011, and I still carry and use my Dragonfly 2 to this day. This is a long term review that benefits from a decade of ownership. How many reviewers can say that? Let’s give this awesome EDC blade the full run down.

General Dimensions and Blade Details

The Spyderco Dragonfly 2 or “DF2″ has a 2-5/16″ blade, an overall length of 5-7/16” and a weight of just 1.2 ounces. You hear about knives that “disappear” into the pocket. This is one of them. I’ve literally forgotten I’ve had it in the pocket many times. It’s been few the wash a few times too. I love the Dragonfly 2 for Every Day Carry (EDC), it’s perfect for almost any kind of urban environment and it’s got a big enough blade (and more importantly, a comfortable enough handle) for most EDC tasks.

Here is a size comparison with the Delica and Endura:

You can see how the Dragonfly II is significantly smaller than both knives. Here’s a video review I did many years ago:

The DF2 comes with a beautiful little leaf shaped blade. The blade almost resembles a dart with its triangular shape. The small swedge running across the top softens the feel of the spine and the whole blade has been given a full flat grind. There is adequate belly and the tip is both fine and strong. This blade excels at opening mail and packages. My only gripe with the blade shape, is that it lacks a sharpening choil. A small notch at the end of the edge that allows you to easily sharpen the entire length of the edge. You don’t have a sharpening choil here, so it will be difficult to sharpen the heel of the blade with a flat stone. Instead I’d recommend a rod sharpener like the corner of a Spyderco Sharpmaker stone.

This knife was made in Japan and like many of Spyderco’s Japanese production knives this one features VG-10 blade steel. VG-10 is a good choice as it holds a good edge and is capable of getting extremely sharp. I say “good” choice, not great, because these days there are better blade steels out there. VG-10 was fine back when this knife was first released, but times have changed. Still, VG-10 is serviceable blade steel and it certainly still works. What I like about VG-10 is how easy it is to sharpen, and how it is resistant to rust and corrosion. Newer, more exotic steels will hold an edge longer, but VG-10 gets the job done. I think it’s fine here, but wouldn’t complain if Spyderco upgraded it to S35VN or something along those lines.

In practice, the Dragonfly 2 cuts well and is an imminently useful knife. I have used my knife for years and years. Mostly for pedestrian things like opening mail and packages, and light food prep. I’ve never prepared dinner with just my DF2, but the knife has no problem with tasks like cutting fruit and cheese. It’s a small blade, but it’s all you need for basic stuff. And it’s a nimble blade. I reach for it when I have a delicate task. The tip is fine, and the angled thumb ramp allows you to get great control over the blade. This knife is a workhorse and it cuts great.

Handle, Ergonomics and Pocket Clip

The handle on the Dragonfly is made of fiberglass reinforced nylon (FRN) and is covered in Spyderco’s bi-directional texturing. This is the same kind of texturing found on both the Delica and Endura and I find that it offers exceptional grip in both wet and dry situations. Unlike the Delica and Endura, the Dragonfly does not have stainless steel liners. That is not a problem for me because the handle feels plenty strong and it is a big part of the reason why this knife weighs so little. Fans of G10 and steel can rejoice because Spyderco also makes a G10 version. All in all handle construction is solid, I like that they used screws for easy take down and everything feels very well finished.

Ergonomics is where we really start to see this little knife shine. Most smaller blades suffer from poor ergonomics and get kicked out of my pocket pretty quickly. The Dragonfly has extremely refined ergonomics and squeezes big grip out of a small knife. First of all, you have a 50/50 choil and large thumb ramp. Both have been given a large amount of jimping. I am a huge fan of 50/50 choils, it really can transform the way a knife handles and what it’s done for the Dragonfly is no exception. But perhaps my favorite ergonomic feature is the way the back end of the handle has been shaped to support the pinky finger. This gives you a true 4 finger grip and allows for awesome leverage on the knife. In my mind, this little section of FRN is what really makes the Dragonfly work.

The pocket clip is another home run. This is a Spyderco wire clip and is perhaps my favorite pocket clip design of all time (really). Small, but very secure, this little piece of hardened steel gives you a deep and reliable carry. The handle has been designed to allows for ambidextrous tip up carry. My only suggestion would be to anodize it black like on my Sage 1 – then it would be virtually invisible riding in a pair of blue jeans or dress pants.

Here is your pocket clip shot:

Deployment and Lockup

The Dragonfly takes advantage of a 11 mm Spyder-hole. This is a good size for the knife and has been left kind of sharp, which ensures that you thumb will catch on it every time. Deployment is smooth and reliable and you can easily flick this knife open if you like. I have zero complaints with the deployment.

Lockup is achieved through a small lock-back positioned in the middle of the handle. I like the lock-back on this knife, it’s easy to get too and the spring isn’t too heavy. The lock-back makes this a fully ambidextrous knife as well (always a plus – especially when a lefty is writing the review). Lockup is rock solid on the FRN version, with zero play in any direction.

Here is a parting size comparison with a Benchmade Mini Griptilian and a Kershaw Skyline, two other all-star EDC knives:

Spyderco Dragonfly II Review – Final Thoughts

This has been the story of the little knife that could. I seriously have nothing bad to say about the Dragonfly. I am totally impressed by how well this thing works as an EDC blade. Since it weighs nothing I also like pairing this with a larger tactical folder; that way I always have the right tool for the job.

Perhaps the only downside is the price. With a price tag hovering in the $50 range, you are looking at Delica (and almost Endura) territory. Some might have a hard time justifying spending that kind of money on such a small knife, especially given the rest of Spyderco’s product line.

However, I love my Dragonfly II and it has remained one of my all time favorite EDC knives. It is hard to beat this small, lightweight package for daily carry. The knife is imminently useful when you need it, but disappears into your pocket. It has stood the test of time for me, and easily makes my best edc knives list. For fans of Spyderco and ultra lightweight EDC knives, the Dragonfly II is a no-brainer.

No products found.

If you would like to buy a Spyderco Dragonfly II, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Delica 4 Review

by Dan Jackson 21 Comments

Last updated: February 10, 2018
Ah, the Spyderco Delica – is there a more classic EDC design? Well, if we are talking about modern folding knives, I’d argue there really isn’t. One of Spyderco’s most popular knives, the Delica 4, is the brand’s bread and butter; a simple, reliable folding knife that is built with easy carry and utility in mind.

Buy the Spyderco Delica at BladeHQ

Buy on Amazon

Many will wonder why it took me so long to review the Delica. Even the relatively new fourth generation version (hence Delica “4”) has been out for a while. The truth is, there are too many knives and too little time. Also, I reviewed the Endura 4 a while back, and since the knives are so similar it took me a while to get around to the Delica. Better late than never however, and I finally intend to give this knife the attention it deserves.

General Dimensions and Blade Details

The Delica has an overall length of 7-1/8″, a 2-7/8″ blade, weighs 2.5 ounces, and is made in Japan. This is a slim and lightweight design, perfect for every day carry (EDC).

The Delica features a leaf shaped blade, and is defined by its large thumb hole. This is a classic Spyderco blade shape. For the uninitiated the blade will almost look goofy, but for those that appreciate this unique aesthetic it’s a beautiful sight to behold. The 4th generation has been given a full flat grind and a beautiful satin finish. All in all, it’s a pretty unremarkable blade, just a simple look that is designed for performance. The tip is fine and lacks reinforcement so the user needs to take care and avoid any prying tasks.

The standard Delica comes with a VG-10 blade. VG-10 is a Japanese stainless steel. This is a serviceable mid range steel. It’s easy to sharpen, takes a fine edge, and holds on to it for a reasonable amount of time. It’s not a super steel, but it’s a step above budget blade steels like AUS-8 and 8Cr13MoV.

Handle, Ergonomics and Pocket Clip

The handle on the 4th gen is fiberglass reinforced nylon (FRN) over full stainless steel liners. The liners have been nested inside the scales and are thoroughly milled out. This keeps the knife very slim and lightweight. Everything has been bolted together so you can take the knife apart if needed. Since the Delica has a backlock, this is a closed back design.

You can get the Delica 4 in a variety of colors including blue, purple, brown, white, green and of course black. Collectors like this, and I admit the choice of color is fun. I went with green for mine, it’s a friendly color that stands out from the sea of black handled knives in my dresser drawer.

The ergonomics on the latest generation of the Delica are quite nice. This is no surprise for a design that has spent over 20 years in the Spyderco catalog. That said, there have been a number of refinements to improve the already solid foundation. The FRN scales have been given what Spyderco calls a “bi-directional texture” – this allows for a slip resistant grip at any angle. Jimping extends from the back of the handle to the top of the thumb ramp, and it locks the thumb in nicely. The handle shape is smoothed on the edges and has plenty of room for large hands. This handle is very comfortable in all the normal grips.

The pocket clip is discrete and offers unparalleled carry options. This is a standard “spoon” style pocket clip and has been coated flat black. This is a removable clip and can be positioned on any of the 4 corners of the knife with 3 torx screws. I love the versatility of this clip, this is a truly ambidextrous design. Clip retention is excellent and the knife rides low in the pocket. The only negative I could find is that the coating does wear off with use, which happens with pretty much any pocket clip.

Deployment and Lockup

It should be no surprise that the Delica uses a thumb hole for deployment. This particular spyderhole has a diameter of 13mm. I have found this to be a good size for both gloved and bare hands. Deployment is smooth and the knife can be flicked out with a practiced hand.

The Delica uses a back lock located right in the middle of the handle. This is easy to access but it will take some technique to close this knife with one hand. The lock is very secure with no blade play at all. The spring on the back lock is very good so inadvertently opening the knife is highly unlikely. The Boyd dent on the lock bar helps ensure that the knife will not inadvertently close either.

Spyderco Delica 4 Review – Final Thoughts

It doesn’t take long to discover why this is one of Spyderco’s most popular designs. One thing that strikes me is how well built the knife feels. The nested liners are flush, the blade is centered, the FRN is well finished. I love the satin finished blade and shaving sharp edge.

I also can appreciate how lefty-friendly this knife is. The thumb hole, lock back and pocket clip are entirely ambidextrous. Add in the choice of colors and this really feels like a knife that was made for me.

As I struggle to find negatives about the knife, I’ll mention that at around $65, it is not a cheap knife. Especially if you are considering this as a step up from $20-30 knives. I think you get what you pay for. I would also say that it would be really nice if they made the Delica in America. These are really minor issues, and if its the worst thing I can say about the knife then it really says something.

In conclusion, the Spyderco Delica is an outstanding knife. It has been refined over decades and has become a measuring stick in the EDC knife world. If you are on the road to collecting pocket knives, the Delica 4 is a foundation blade. If you are simply looking for a practical EDC knife, then the Delica 4 fits that bill too.

Spyderco Delica 4 Lightweight Signature Knife with 2.90" Flat-Ground Steel Blade and High-Strength Green FRN Handle - PlainEdge - C11FPGR

Wide Spectrum of Handle Colors: The Delica 4 now offers new vibrant tones including blue, green, brown, gray, orange, zome green, black and purple.
Superior Blade Steel: The blades are full flat-ground VG-10 Steel with a thinner highly refined cutting edge and a larger 13mm opening hole.
Ultra-Lightweight: Inside the handle are dual skeletonized Stainless Steel liners which strengthen the knife without additional weight and double as an anchor for external and internal components to attach through generating more sturdiness.
Ergonomic: Added to the blade's spine is slip resistant jimping. Phosphor bronze washers smooth out the open/close action and the clip is upgraded to a four-way tip-up, tip-down, left-or right-handed clip.
A Secure Grip: Molded onto the FRN Handle's surface is Bi-Directional Texturing for slip-free tactile traction. It provides resistance to slipping in the hand.

If you would like to buy a Spyderco Delica 4, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.