• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

BladeReviews.com

Knife Reviews

Menu
  • Home
  • Reviews by Brand
    • Al Mar Knives
    • Benchmade Knives
    • Boker Knives
    • Buck Knives
    • Cold Steel Knives
    • Chris Reeve Knives
    • CRKT Knives
    • DPx Gear
    • Emerson Knives
    • ESEE Knives
    • Fällkniven Knives
    • Fantoni Knives
    • Gerber Knives
    • Great Eastern Cutlery
    • Hinderer Knives
    • Hogue Knives
    • Ka-Bar Knives
    • Kershaw Knives
    • Kizer Knives
    • LionSteel Knives
    • Mcusta Knives
    • Mora Knives of Sweden
    • Microtech Knives
    • Ontario Knives
    • Opinel Knives
    • Reate Knives
    • Rockstead Knives
    • Schrade Knives
    • Shirogorov Knives
    • Smith & Wesson Knives
    • SOG Knives
    • Spartan Blades
    • Spyderco Knives
    • Steel Will Knives
    • Strider Knives
    • Victorinox Knives
    • Viper Knives
    • Zero Tolerance Knives
    • Close
  • Reviews by Purpose
    • EDC Knife Reviews
    • Tactical Knife Reviews
    • Survival Knife Reviews
    • Hard Use Folding Knives
    • High End Pocket Knives
    • Gentleman’s Folders
    • Rescue Knives
    • Traditional Knives
    • USA Made EDC Knives
    • Close
  • Reviews by Class
    • Folding Knives
    • Fixed Blade Knives
    • Assisted Opening Knives
    • Automatic Knives
    • Machetes
    • Titanium Frame Lock Knives
    • Close
  • Best Of
    • The Best EDC Knives
    • Best Survival Knives
    • Best Tactical Knives
    • Best High Value Knives
    • Close
  • Gear Reviews
    • Flashlight Reviews
    • Multi-Tool Reviews
    • Watch Reviews
    • Knife Sharpener Reviews
    • Close
  • FAQs
    • Knife Care and Maintenance
    • Knife Dictionary
    • Knife Steels
    • Steel Composition
    • Interviews
    • Close
  • Contact
  • About
    • About
    • Privacy
    • Links
    • Close

m390

Reate T4000 Review

by John Burridge 3 Comments

Whenever there’s the thinnest excuse to use a pocket knife, I do so. Over the last month of carrying the Reate T4000 nearly every day, I’ve noticed that when I open it up in public to do any of the small innocuous things I use a knife for, I’ve seen people’s eyes light up with…not terror, but a distinct “What the hell is that?” look mixed with a tingle of atavistic fear.

Reate T4000 Review
Buy the Reate T4000 at BladeHQ or GPKnives

It looks like a large double edged dagger- which, to the subconscious mind of most people, looks like what the ruling classes have been using to kill people with for the last four thousand years, and/or what everybody gets stabbed with in Game Of Thrones. I have two friends who are into knives on almost the same nerdy level that I am, and even their first responses were “Whoa!”

The instant I saw the T4000, I knew I wanted it simply for the fear/thrill reaction it gave me. But when writing a knife review, I always try to determine the knife’s intended purpose. In this case, it’s easy: when Reate Knives began teasing the T4000 in July 2018, BladeReviews.com’s own Ben Schwartz wrote an article about it for KnifeNews.com. Here’s what the designer of the knife, Tashi Bharucha, had to say about it:

[It] does not pretend to be anything other than a stabbing pocket sword.

It’s intended purpose is to be a stabbing pocket sword? Sign me the fuck up!

General Dimensions and Blade Details

The Reate Knives T4000 is part of a four-knife series, all designed by French knife auteur Tashi Bharucha. At the time of writing, only the smallest of the four, the T2500 and the T4000 have been released. The naming convention reflects the length of the blades in inches- the T2500 is 2.5” long, the T4000 is 4”, etc. The T3000 and T3500 have yet to be released.

Reate T4000 Blade Grind

I find it curious that a French designer and a Chinese knife manufacturer are using the antiquated Imperial measurement system for the names of these knives- I’m going to assume their target market is ‘Merica. I don’t know if the pricing scheme is also related to the blade length, but the T4000 cost me $400 USD. I suppose that’s a bargain compared to Tashi Bharucha’s custom, handmade knives, which cost at least $1,000. Even though I’m a big fan of his work, I’m not going to spend over a thousand bucks on something I can’t drive, ride, or shoot.

It comes with a bunch of nice, unnecessary stuff like a Reate Knives Zipper pouch, a cleaning cloth, a microfiber knife bag, a velcro embroidered “Reate” patch, and extra handle screws, which are actually a really nice touch.

There are three handle choices: Titanium with inlaid carbon fiber, inlaid brown canvas Micarta, or inlaid green canvas Micarta, which is what I bought. It’s an unusually large and heavy folder, even bigger in every respect than my collection’s previous champion of unnecessary size and weight, the Microtech Sigil MK6.

Reate T4000 vs. Microtech Sigil

The T4000 weighs 5.3 oz (150 g), is 8.86” (225 mm) long when open, 4.92” long (125 mm) closed, and 1.75” (44 mm) tall when open or closed. Some knives disappear into your pocket- this definitely doesn’t. It’s not particularly thick though, at .68” (17.2 mm) at it’s widest point, pocket clip included.

The blade steel is Bohler M390, which is considered a “super steel” due to it’s extreme hardness and corrosion resistance. I’ve been reading up on blade steel, and want to give a shout out to knifesteelnerds.com for a lot of in-depth articles that a non-scientist like myself can understand. What I’ve learned about M390 is that it’s high hardness resists edge deformation, which keeps it sharp. The trade-off for high hardness is a reduction in toughness, which is basically resistance to chipping. A lot of these hardness/toughness qualities seem to be imparted into the blade during the manufacturing process known as heat treating. My limited understanding of heat treating boils down to this: you heat up the unfinished steel blade to get the individual molecules to bond together in a very specific way, then remove the blade from the heat to lock in the molecular structure.

Most knife manufacturers guard their heat treating methods as proprietary secrets, but Reate Knives has made this little nugget known: after the heat treating is complete, they use a technique called “freeze edging skill.” This process cools the blade while the cutting edge is being ground, so that the friction-induced heat of grinding doesn’t undo the specific molecular structure from it’s heat treating. It may just be marketing hype, but it makes sense to me.

I was recently talking to a guy who is several orders of magnitude higher than me on the Blade Steel Nerdiness spectrum, and he gave me an earful about how modern super steels like M390 are too brittle, and he prefers softer, “tougher” steel like VG10 or 154CM which are easier to sharpen. I totally get it because he’s way into sharpness- he sharpens his daily carry Sebenza with a leather strop every day whether he’s used it or not. Personally, I have a bunch of nice pocket knives that I carry and use, and I wait until they’re good and dull before I sharpen them. I would rather have a knife with a crazy hard edge that I can use longer between sharpenings. In a month of light duty cutting, I’ve barely dulled the edge of my T4000, so Reate’s M390 is working great for me.

The blade is surprisingly slim for such a big knife. It has a thin hollow grind with a decorative fuller, which briefly flares the blade’s maximum width to 3.8 mm in the center. I looked up a ton of information about blade fullers for this review, but it’s far too boring to include here.

Reate T4000 Blade

Suffice it to say that fullers are basically for structural reinforcement on long blades and are not “blood grooves.” The T4000’s standout feature is it’s aggressive symmetrical dagger shape, but the top of the blade, which is exposed when the knife is closed, has a 1.1 mm thick unsharpened edge.

This knife has excelled at my usual mundane tasks of box and bag opening and loose thread cutting, but I like trying new things, and I’ve never used a dagger for food prep before. I stabbed and slashed and hacked my way through tomatoes, onions, artichokes, sausages, etc. My experience using the T4000 in the kitchen was pretty much like with every other pocket knife I’ve used in this capacity- I couldn’t dice anything like with a chef’s knife because my knuckles would hit the cutting board before the blade would. It’s thin blade slices well, and the fuller seemed to keep food from sticking to the side of the blade. The false edge on the top of the blade is wide enough to push down on for some extra leverage.

Other uses for the T4000’s false edge are:

  1. Opening mail- the false edge opens envelopes perfectly without dulling the sharpened side.
  2. Removing staples- slip the tip of the blade under the staple and twist towards the unsharpened side.
  3. Pretending to slash my wrist- I’ve absolutely horrified several people.

Handle, Ergonomics, and Pocket Clip

On the T4000, designer Tashi Bharucha used a variation of his signature handle shape. From an aesthetic standpoint I love it, but I find it’s ergonomics often make the knife difficult to use. The problem, in my opinion, is how far back my hand is from the blade’s tip. There’s no place on the handle to choke up and gain the mechanical advantage of having my hand closer to the tip of the blade.

Reate T4000 Handle

That being said, I don’t really care, because I don’t buy his knives for the ergonomics. I would never classify myself as a “fanboy” because first of all I’m not a boy, I’m a goddamn man, but Tashi’s design style really speaks to me, and I now own five of his production knives.

Reate T4000 Size Comparison with other Tashi Designs

The handle ergonomics on three of the others are similar to the T4000, with the exception being the Massdrop-produced Prism (far left in photo), which cleverly exchanges some sharpened blade length for the ability to choke up on the handle. The Tashi B./Reate Knives Baby Machine (not pictured) knife has a similar ergonomically friendly shape.

The T4000’s handle is made of two pieces of titanium and one piece of green canvas Micarta. This is my first knife utilizing Micarta, and I was dismayed that after a month of sweat and cooking oil and dirty hands, the Micarta’s color has permanently changed from light green to a darker olive drab. It’s somewhat grippy texture is unchanged. The mating of the Micarta into the handle is so precise I can see where the inlaid Micarta meets the titanium, but I can’t feel the seam.

Reate T4000 Ergonomics

Reate’s fit and finish on this knife are superb. Every angle machined into the handle looks sharp but feels smooth. The T4000’s shape is just so weirdly aggressive that I can’t stop looking at it- it’s the knife equivalent of an Italian sports car. Specifically, the Lamborghini Urus: a 641 horsepower all wheel drive SUV that, to my eye, shares many design cues with the T4000. Please forgive my crude Photoshop skills:

Reate T4000 vs. Lamborgini Ursus

Both the car and the knife are fascinating combinations of severe lines and curves, and both come off as being large, lumpy and aggressive. I periodically see one of these big stealth tank-looking SUV’s rolling by, and my response is always “Whoa!” By the way, for an excellent review of the Lamborghini Urus, I suggest checking out the Amazon Prime TV show “The Grand Tour” season 3, episode 5 “An Itchy Urus.” Anyway, back to the knife…

The forward tip of the pocket clip is very sharp. Not cut yourself sharp, but certainly scratch the paint off your car door sharp.

Nonetheless, the clip looks great, and I think it’s pointy design is entirely appropriate for a stabbing pocket sword. The T4000’s titanium clip is milled into Bharucha’s signature stylish shape, and the clip’s shape and position mirror the titanium inlay inside the Micarta inlay on the show side. The amount of flex is great, it’s amount of offset from the body of the knife is great for thick denim jeans pockets, and it’s shape melts into the fold of my hand when I’m using it.

Reate T4000 Pocket Clip

When carrying the T4000 while wearing reasonably tight pants (as I often do), the knife, though heavy, stays put due to it’s robust clip. But when wearing loose shorts, I feel that big hunk of titanium and steel rhythmically slapping my thigh as I walk.

Deployment and Lockup

The blade is heavy and the flipper detent is strong, so it takes a bit of finger muscle to open it. It swings smoothly on ceramic bearings, and has a nice strong magnet-like feel that snaps the blade closed when it’s open less than 6 mm. It’s a framelock, and locks up securely with about half of it’s 3 mm steel lock face in contact with the blade. It’s not a hard use knife like my DPX HEST F1, which has a 75% lockup on it’s 4 mm wide lockbar, but the T4000’s lock doesn’t seem to be likely to fail under reasonable use.

There is one weird thing about it though- it’s sound. When flipping it open, instead of the normal, satisfying “click” that I’ve come to expect from titanium knives, there’s a two-part sound like a metal soap bubble popping, followed by an unusually high-pitched snap. One of the nice things about having a lot pocket knives is that I have them on hand to compare and contrast with each other. At the moment, I have 16 reasonably good folding knives, and I sat down in a quiet room and flicked or thumbed open every single one. Through this highly scientific investigation I have determined that the sound the Reate T4000 makes when opening is utterly unique. The sound has nothing to do with it’s functionality at all, but it’s odd enough that I feel compelled to mention it.

Two last things: first, the T4000 has a party trick- it can stand on it’s head. Second, I was driving on US Interstate 5 on the East side of Los Angeles and noticed a 125 foot (38 meter) tall Tashi Bharucha pocket clip rising above the LA River. It’s the central spire of the North Atwater Bridge which is due to be completed in 2020. Say what you will about the evils of social media, but thanks to Facebook I was able to send the picture below to T4000 designer Tashi Bharucha. He responded that he hadn’t seen it before and, no, he did not design the bridge.

Reate T4000 vs. North Atwater Bridge

Reate T4000 Review – Final Thoughts

The T4000 is definitely a niche item. It’s not for everyone, it’s not perfect, and it’s relatively expensive at $400. But I dig the Reate T4000 stabbing pocket sword on a deep, visceral level – I don’t know if it’s an ancient, hardwired feeling of security or a Roman-Legionnaire-in-a-past-life kind of thing, but I sure do like it.

Reate T2500 on BladeHQ
Reate T2500 – From $419.95
From: BladeHQ

I recommend purchasing the Reate T4000 at BladeHQ or GPKnives. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. Thank you very much.

Filed Under: EDC Knives, Folding Knives, Reate, Titanium Frame Lock Knives Tagged With: flipper, m390, Tashi Bharucha, titanium

Microtech Troodon Review

by Dan Jackson 2 Comments

I’ve got a couple Microtech knife reviews under my belt at this point, and as far as their automatics go I’ve reviewed the Halo VI and the Stitch. Something that is obviously missing from the picture is one of their dual action Out The Front (OTF) knives. The OTF autos are are the knives Microtech is best known for making. And of course for some reason I waited to pick one up.

Microtech Troodon ReviewBuy the Microtech Troodon at BladeHQ

Oddly enough, it was when a buddy of mine in the real world told me he was picking up a couple Ultratechs to daily carry, it prompted me to think about a dual action OTF of my own.

I went for the Troodon because I thought it looked cool with its angled front. I went with a double edge spearpoint blade for added coolness, but as usual for Microtech you can configure this knife in a myriad of ways. Plus, the knife is named after a dinosaur. I’ll get an Ultratech soon.

General Dimensions and Blade Details

The Troodon has an overall length of 7.65″, a 3.00″ blade, weighs 3.00 ounces, and is made in the USA. This is a nice size knife for EDC, provided you are in a jurisdiction that allows you to carry an OTF knife. They do make these with a single edge, so it’s possible this could be a daily carry for some. Personally, this has been more of a collectible than a true daily carry for me.

Here is a picture next to a Spyderco Sage 5:

Microtech Troodon vs. Spyderco Sage 5

As you can see it’s a nice size for EDC. Provided you are in a jurisdiction that permits you to EDC it.

For those wanting something significantly bigger, Microtech offers the Combat Troodon with an overall length of 9.5″ and a 3.8″ blade. Weight comes in at 5.35 ounces.

As I’ve mentioned a couple times, this knife has a dual edged spear point blade. You can also get the knife in a drop point, tanto, or hellhound tanto. Additional options include partial serrations, full serrations, coated, or uncoated in a variety of finishes.

Microtech Troodon

My knife features a satin finish. It has been beautifully ground. All grinds are crisp and uniform. The edges are also nice and even, not an easy job for a double edged knife. There is a deep fuller down the blade that has been further pocketed. It looks cool.

Blade steel is the tried and true M390. I have waxed semi-poetic about this steel for a long time. It’s one of my favorite high end steels, blending the qualities of good edge retention and easy sharpening. It also polishes nicely and exhibits good rust resistance.

I can’t say I’ve used this knife a whole lot. Besides it probably being illegal to carry outside my home, the double edged blade is kind of dangerous for my usual box cutting, apple coring shtick. I’ve used it lightly and treated it as more of a collectible. While I know some people will daily carry their Troodons, a lot will keep them as collectibles.

Microtech Troodon Blade

I will say the Troodon came extremely sharp out of the box. It cleanly cuts thin receipt paper. It will open a letter or a package without a problem. And I have to confess these dual action OTFs are actually very handy because you can use them easily with one hand. My Troodon was epic in the kitchen for opening up bags of produce. It also sliced some roma tomatoes easily, although I was careful to clean the blade after prior to retracting it back into the handle of the knife.

On the subject of sharpening, it’s interesting to review Microtech’s FAQs. They say improper sharpening voids their warranty. I’d be curious to learn what that entails. I’m sure gentle stropping or running the edge on a ceramic rod like a Sharpmaker will not void the warranty.

Handle, Ergonomics, and Pocket Clip

The Troodon features a hard anodized aluminum handle, fastened together with Microtech’s proprietary hardware. Usually, this is the part of the review where I’d take a moment to whine about the proprietary hardware, but this is a knife I have no desire to open up.

Fit and finish is excellent. All the parts line up perfectly, and everything has been finished to a high standard. The hard anodizing is good, but it’s not impervious to wear. My anodizing has worn slightly underneath the pocket clip, and my electrician friend’s Ultratech shows some significant battle scars after a couple months of heavy duty daily carry.

Microtech Troodon Handle

Capping things off is an aggressive glass breaker / “skull crusher” on the pommel.

The Troodon is comfortable in hand. There is a lot of traction on this handle thanks to deep scallops all over the handle. That, combined with the box handle shape, means that this is not a knife that will melt into your hand. But you can definitely get a good grip on it, which is essential for using the dual action button. More on that later.

Microtech Troodon Ergonomics

While the knife will never be as comfortable as an Emerson, the handle design serves its purpose and looks good doing it.

The pocket clip is a deep carry “double dip” clip, a la Chris Reeve Knives. I’ve always liked double dip clips as they help anchor the knife in your pocket. That, combined with the good spring retention and aggressive texture under the clip, means that this knife isn’t going anywhere. Comforting when you shell out almost $400 for a pocket knife.

Microtech Troodon Pocket Clip

The clip is another precision machined part marrying form and function. It looks cool without being over-the-top, and is both serialized and production date stamped. It’s anchored in place with that impressively machined glass breaker pommel. The clip can be swapped for right or left side tip up carry, but you will need either a special tool or some patience to un-thread the pommel without marring its finish.

In practice the Troodon carries great. The pocket clip is secure and the knife is light. I’ve carried this knife around the house and quickly forgot the Troodon was in my pocket. I literally forgot I was carrying the knife, to the point where I ended up taking it on an hour long bike ride. Generally I don’t select $400 knives for bike rides, but the Troodon performed admirably, thanks in large part to that double dip clip.

Microtech Troodon in the Pocket

Deployment and Lockup

This section is why you buy a Troodon. It’s a dual action out the front automatic knife. That means the blade both opens and closes with the push of a button. It’s an “Out The Front” automatic because the blade shoots and retracts out the front of the knife. None of this should come as a surprise, but it’s worth mentioning to be thorough.

Microtech Troodon Deployment Button

So how does it work? The button is stiff, and takes a good amount of pressure to actuate. That’s a good thing, as you don’t want the knife to accidentally open up in your pocket. Thanks to the significant force required to actuate the blade, I think it’s almost impossible that the blade would open up accidentally.

When you do apply enough force to trigger the blade it shoots out with a satisfying snap. It feels punchy, but its actually not enough force to be considered a “penetrateor”. This means it’s not designed to be shot into it’s target like a light saber. If you hold an index card an inch or two in front of the knife, it will not punch through the card, and it will instead derail the blade. You can then reset the blade by pulling it out manually. I consider this to be a feature, not a bug. As it stands a knife like this requires a certain level of respect. It’s not a toy and you need to be careful with it.

Here it is next to my Halo VI:

Microtech Troodon vs. Halo VI

When the knife is open there is a little blade wiggle. Not a lot, maybe half millimeter. That’s the nature of most dual action knives, although, the Deadlock is a notable exception. The blade wiggle is to be expected with these production dual action OTFs. The knives will hold up fine under normal use, but you definitely don’t want to do any prying or chopping with a knife like this.

The blade retracts by pulling back on the button. It shoots into the handle with the same speed and sound. The entire process is novel and satisfying.

Microtech Troodon Review – Final Thoughts

Each Microtech I’ve bought has encouraged me to buy another. They are unique and memorable knives. They aren’t cheap, but they are beautifully made in the USA. The visual flair, attention to detail, and robust nature of their offerings elevates their offerings beyond gimmick.

The Troodon is no exception. These dual action OTF knives are Microtech’s bread and butter, and it’s easy to see why. The action is smooth, satisfying, and undeniably cool. While this knife isn’t a daily carry for me, plenty of folks like to carry these D/A OTFs. Part of the appeal is that you can easily open and close the knife with one hand. In that sense, this is actually a practical tool. But it’s Microtech’s ability to blend form and function that keep me coming back.

Recommended to those who are interested in the design, or a high end dual action OTF automatic. I don’t think you will be disappointed.

Microtech Troodon on BladeHQ
Microtech Troodon- From $374.00
From: BladeHQ

I recommend purchasing the Microtech Troodon at BladeHQ or Amazon. Thank you for reading.

Filed Under: Automatic Knives, Collectable Knives, High End Pocket Knives, Made in the USA, Microtech Knives Tagged With: aluminum, m390, spear point

Reate T2500 Review

by Dan Jackson 2 Comments

Well, that didn’t take long. Only a couple months after acquiring the Reate Crossroads, another Reate has found it’s way into the collection. This time Reate has teamed up with knife designer Tashi Bharucha with a 4 knife series.

Reate T2500
Buy the Reate T2500 at BladeHQ

I’ve long been a fan of Tashi. His designs are super clean, yet they all have a dynamic look to them. I’m an admirer, but mostly at a distance as his stuff is usually released in expensive limited edition runs. I haven’t been able to summon the ~$400 from my bank account to acquire one of his designs.

This T2500 is interesting because it’s a sub $200 knife. That’s unique for both Tashi and Reate. So I had to snag one.

General Dimensions and Blade Details

The T2500 has an overall length of 5.6″, a 2.5″ blade, weighs 1.76 ounces, and is made in China. This is the smallest knife in the series, and it’s pretty damn small. I can see why it retails for $190. It’s beautiful, but charging much more would be a little ridiculous. Here it is next to my Spyderco Dragonfly 2:

Reate T2500 vs. Dragonfly 2

As you can see, the T2500 compares favorably with the DF2. This makes a nice small EDC knife. It could also be called a Gentleman’s folder, although it has a bit of a “tactical” vibe to it.

The blade is an elegant drop point. It’s mostly belly, terminating in a fine tip. This is the kind of simple blade shape that will take care of any small task. The blade has been given a high flat grind, and has been left with a satin finish and stonewashed flats. There is a small swedge and a harpoon tip. A tiny sharpening choil allows you to sharpen the edge all the way to the heel.

The blade stock is a hair over 3.3mm thick, so this is a relatively thick blade especially given the size of this knife. All the details have been considered. There are no sharp edges save the cutting edge. All the others have been gently chamferred for comfort.

Reate T2500 Lock Side

Blade steel is tried and true M390. Reate always uses a premium steel and this knife is no exception. M390 has the covetable qualities of excellent edge retention, relatively easy sharpening, good rust and corrosion resistance, good toughness. It’s one of the best all round EDC knife steels.

I have to confess that initially I was a little reluctant to put this knife through its paces. It’s a beautiful piece, and the small size and exceptional fit and finish gives the knife something of a jewel like quality. But I quickly got over myself and went to work. Boxes were broken down, food was prepared, packages containing yet more knives were opened. I didn’t take this one salt water fishing (I’ll leave that for the $22 Cold Steel Pro Lite Sport), but I basically did everything else with it.

Reate T2500 Blade

The T2500 is a phenomenal slicer. It came screaming sharp out of the box. The fully flat ground blade easily worked its way into boxes, got underneath the folds of envelopes, and could do a little food prep. The short blade doesn’t make it the most effective apple slicer, but you can get the job done with it. I didn’t have any issues with rust or corrosion. When it was time to touch up the edge, I was able to do that easily on my [easyazon_link identifier=”B001JL1I6Y” locale=”US” tag=”brdfkdfk-20″]Spyderco Golden Stone[/easyazon_link]. This reminds me, I still need to review my Spyderco Golden Stone.

No complaints with the blade or the blade steel.

Handle, Ergonomics, and Pocket Clip

The handle of the T2500 is a miniature engineering marvel. It’s two pieces of bead blasted titanium with a carbon fiber insert. The way the handle pieces come together is super impressive. I’ve tried to capture it in a photograph:

Reate T2500 Spine

It’s hard to tell, but there is a seam running down the spine of the handle where the two pieces meet.

I’m also impressed by how the show side doesn’t show any hardware except for the pivot. Oh, and the carbon fiber inlay. That is a work of art. Running my fingers across it you cannot feel where the titanium ends and the carbon fiber begins. It’s absolutely seamless and perfect. I don’t own any inlayed knives to compare it with, but this strikes me as a tough standard to beat. Reate offers this with regular woven carbon fiber or marbled carbon fiber. I chose marbled to match my Crossroads. That was a good choice.

Reate T2500 Handle

There are a number of other interesting details with the handle. One is the lanyard hole, which has been integrated in a way to not spoil the beautiful lines of the knife. Another detail is the blue titanium hardware. All the machining is top notch. The handle has been exceptionally well considered. It’s an impressive job and one you need to hold to truly appreciate.

Reate T2500 Open Hand Ergonomics

This is a small knife, so it’s not going to work in the hand like a larger folder. The Dragonfly 2 is the most impressive small handled knife I’ve reviewed, and the T2500 is serviceable, but it’s not a Dragonfly 2. If you just use the handle you can get a comfortable 3 finger grip. If you use the flipper tab as a finger choil, then I can get all 4 fingers onto the knife, but it’s a little tight for my larger hand. That’s a trade off you get with most small knives.

Reate T2500 Ergonomics

I will say the T2500 does feel good in hand. No sharp corners or hot spots. You would think the angled pommel would be uncomfortable, but it hasn’t been an issue for me. It slides in between my fingers. There isn’t much in the way of texture on this knife, but I haven’t had issues with it slipping out of my hand either. Bead blasted titanium provides enough traction for my purposes.

The T2500 comes with a machined titanium clip. That’s a nice detail on a sub $200 folder. I know some folks aren’t fans of sculpted clips, but I think some companies have dialed them in. Reate is one of those companies, as the clip offers good looks and excellent spring retention. It works great as a pocket clip, holding the knife firmly in place. I haven’t had the knife slip down in my pocket or fall out.

Reate T2500 Closed

At well under 2 ounces, this T2500 carries like a dream. It’s excellent and reminds me a lot of the way the Dragonfly 2 carries. You simply don’t feel it in the pocket. It disappears until you need it. I wear shorts and pants with triangular pockets (rather than the “U” shaped pockets found on blue jeans), and the knife stays high in my pocket. That keeps it out of the way and avoids contact with things like keys and my flash light.

Reate T2500 Pocket Clip

Visually, the knife is relatively discreet in the pocket. The pokey looking handle and titanium clip with blue hardware will draw the eye more than something like a small Spyderco wire clip, but that’s the trade off you get when you opt for a fancier pocket knife like this.

Deployment and Lockup

This is a titanium framelock flipper. The action is dialed in thanks in part to ceramic bearings and a ceramic detent. The flipper tab is generous and easy to get at. The knife flips with the best of them. I’d rate the action at an 8 out of 1-10. This is a small knife, so it’s a little more fiddly then a full size folder, but it’s not bad and I haven’t had any issues flipping the blade open.

Here is a shot with my Crossroads. All my marble fiber clad pocket knives in one photo:

Reate T2500 vs. Reate Crossroads

For lockup we have a titanium framelock with a stainless steel insert. Lockup is early on my knife, with the tang of the blade engaging with approximately 40% of the lock bar. Lockup is secure with zero blade play in any direction. Disengaging the lock is easy thanks to cutouts both on the lockbar and the non-locking side of the knife. There is zero lock stick. It’s a perfectly executed framelock.

Here is a parting size comparison with the CRKT Pilar (the carbon fiber BladeHQ exclusive). A couple nice smaller knives featuring carbon fiber:

Reate T2500 vs. CRKT Pilar

Blade centering is perfect on my knife. No surprises there given the price point and how dialed in everything else is on this piece.

Reate T2500 Review – Final Thoughts

If you are looking for a small high end titanium framelock flipper, then look no further. This knife delivers. It is beautifully made from the finest materials, and Tashi’s design is as striking as ever. The T2500 is loaded with detail and the execution of every aspect of the knife is superb. This is a beautiful little knife.

The T2500 strikes me as a high end and slightly less practical version of the Dragonfly 2. It’s pretty much the same size and weight. It carries similarly. It’s not as utilitarian as the Dragonfly 2, but it gets the job done. The ergonomics of the DF2 with it’s curved handle and forward finger choil remain unmatched by the T2500, but that’s OK.

That said, not everyone is looking for a micro knife. And although I knew this one would be small, but it’s very small. There are some sacrifices with a smaller knife like this. Mostly in the ergonomics. I would not be opposed to picking up the T3000, although I’m not sure they are even available at this point.

Then again, I don’t have a lot of 2.5″ bladed knives in my collection. I expected the T2500 to be beautiful, but what surprised me was how much I ended up enjoying carrying and using it. It is lightweight and practical. I bought the T2500 as more of a collectible, but I will continue to carry and use the knife in my regular EDC rotation.

So I suppose I could sum up this review by saying the T2500 is “surprising”. It’s both surprisingly small, and a surprisingly practical EDC knife. I recommend the T2500 for fans of small flippers, and those like me that wanted to try out a Tashi Bharucha design at a price point under $200.

Reate T2500 on BladeHQ
Reate T2500 – From $192.00
From: BladeHQ

I recommend purchasing the Reate T2500 at BladeHQ or GPKnives. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: EDC Knives, Folding Knives, Reate Tagged With: bearings, carbon fiber, flipper, m390, Made in China, Tashi Bharucha, titanium

Reate Kirby Lambert Crossroads Review

by Dan Jackson 2 Comments

I saw this knife on the cover of Blade Magazine and had to have it. That’s the short version at least, but the story goes back way further than that.

Reate Kirby Lambert Crossroads Review
Buy the Reate Crossroads at BladeHQ

I’ve been a fan of Kirby Lambert’s work for years. He was one of those makers that captivated me with his crisp lines and clean work. The knives seemed to belie human intervention. I also remember when Andrew got a Kirby Lambert Wharn. It was late 2012 I think. It actually inspired me to get on Kirby’s books to try and order a Snap. I was on his books, but must have fallen out of line as I never got the follow up email when it was my turn. But that’s OK, a custom Kirby Lambert knife is an object I enjoy lusting over more than actually owning.

But when I saw the Reate Crossroads on the cover of that magazine, and realized it was a collaboration with Reate that could be had at production level prices. Well, its like I said… I had to have it.

And Reate making a knife I “had to have” is kind of interesting. Reate hasn’t gotten much love here. Beyond the Todd Begg Steelcraft Bodega, we haven’t featured a single Reate knife. That isn’t for lack of wanting. It’s more a lack of direction. Their stuff looks great, but their product line seems so deep and expensive that it’s hard to figure out where to begin. If you had to buy one Reate knife, which knife would be “the” Reate to buy? There is no easy decision, but feel free to make a suggestion in the comments. I think it’s the paradox of choice.

Reate Kirby Lambert Crossroads

In contrast, the Crossroads was a no brainer. That makes it a smart move for Reate. If they can impress the consumer with their collaborations, people will be more likely to try out their OEMs.

General Dimensions and Blade Details

The Crossroads has an overall length of 8.375″, a 3.625″ blade, weighs 5.31 ounces, and is made in China. This is a hefty knife, with a lot of the weight focused around the pivot, so I can’t sit here and say this knife has been a strong daily carry for me. It’s more of a collectible. The knife looks like a pristine custom piece with its two tone blade, custom hardware, and marble carbon fiber hand scales. I’m having time using it hard. But for some this will make a great EDC piece. Others I suspect will baby the knife and keep it more as a collectible. I fall into the latter category.

Here is a size comparison with a workhorse from my collection, the Spyderco Paramilitary 2:

Reate Kirby Lambert Crossroads vs. Spyderco Paramilitary 2

The blade is either a drop point, or a reverse tanto. Hard for me to tell. Or care, if I’m being completely honest. At any rate, there is a blade, and it’s a beautiful blade with a two tone satin finish. The blade has been given a deep hollow grind, and there is a long angled swedge riding most of the blade length. The end result is a functional blade shape with sloping belly, and needle fine tip. But it’s also a unique and somewhat unusual blade shape with what appears to be a broad sweeping shoulder, or a bull neck of steel that meets the top of the bolster.

One odd complaint is that although there is a large sharpening choil, the blade is not sharp all the way down at the heel. There is maybe a quarter inch of unsharpened blade. Hopefully my knife is an exception, but this is an odd omission on a knife that appears to have otherwise been lavished with attention.

Reate Kirby Lambert Crossroads Blade

Reate chose M390 stainless steel for the blade material. Readers of my various reviews of high end knives will know and love M390 for it’s ability to hold a keen edge, to be relatively easy to sharpen, and resist rust and corrosion. It also takes a nice finish as shown by this beautiful blade.

Despite the heel of my blade being unsharpened, the Crossroads otherwise came exceptionally sharp out of the pouch. Blade stock is relatively thick, but the knife still slices cleanly thanks to that deep dish grind. Can’t say I’ve run this knife hard, but my light duty has shown that the Crossroads is a capable cutter.

Handle, Ergonomics, and Pocket Clip

The Crossroads is a bolstered knife, with your choice of handle scale material over titanium. The bolstered look is a Kirby Lambert signature, and it has been executed beautifully on this knife. You can barely feel the seam as you run your finger over the transition between the handle scale and titanium bolster, at least with this marble carbon fibered version. The hardware is all anodized titanium. The pivot in particular is a striking dual anodized affair. A floating titanium backspacer and lanyard pin rounds things out.

All said this is a beautifully rendered handle and it captures the essence of what makes Kirby’s work so special: his unique aesthetic coupled with an eerie level of fit and finish. There are superb details on this knife and the materials are all top notch. Check out that marble carbon fiber. You can get lost in this stuff:

Reate Kirby Lambert Crossroads Handle

By and large the Crossroads is a comfortable knife. First of all, the handle is generous and will accommodate most people. The finger choils are large and allow for plenty of room. Sometimes finger choils can constrict the user, but I didn’t find that to be an issue here. There is no jimping, yet the broad spine of the blade provides plenty of room for the thumb.

But I also found that my thumb caught on the tang of the blade. I’m talking about where the spine of the knife meets the stop pin. It’s shaped like a hook, and I wonder if something could have been done to ease that edge. One commandment of knife design is that the only sharp edge should be found on the blade, and in a way this knife violates that cardinal rule.

Reate Kirby Lambert Crossroads Backspacer

The Crossroads utilizes a titanium sculpted pocket clip. Some people won’t like this, but I think the titanium clip works great, and compliments the aesthetics of this knife perfectly. The clip has good spring action, and it does a decent job of holding the knife in your pocket. The smooth titanium and smooth marble carbon fiber won’t give you the pocket shredding traction of a Cold Steel or Emerson folder, but I suspect it will get the job done for most people, especially given the dressy nature of the knife.

Reate Kirby Lambert Crossroads Ergonomics

The Crossroads is a big and bulky knife. There is no way around that, and you will feel the Crossroads in your pocket> Plus, the nature of the the bolstered design puts a lot of weight towards the pivot, so you will get some “pendulum” action if you aren’t careful. Not the best knife for daily carry, but if every knife was as practical as my Native 5 lightweight I wouldn’t have a whole lot to write about.

Reate Kirby Lambert Crossroads Pocket Clip

Deployment and Lockup

The Crossroads is a flipper with a multi-row ceramic bearing system. This is my first multi-row bearing system (MRBS) knife, and part of me is tempted to take it apart to see what that looks like (and show you). The other part of me doesn’t want to dick up the anodized titanium hardware. Been there, done that with my Fantoni CUT Flipper. I still regret the day I tried to take that knife apart and stripped the screws.

Here is a shot of the Crossroads next to my Olamic Wayfarer 247:

Reate Kirby Lambert Crossroads vs. Olamic Wayfarer 247

I searched online for a picture of the internals of the Crossroads and couldn’t find anything. For now we will all have to use our imaginations and figure that inside there is some sort of MRBS. It appears to be a caged bearing system as I peek into the knife. And I’d believe it given the glassy smoothness to this knife. The blade falls shut easily.

The detent is also ceramic with a crisp and punchy action. There is a detent ramp that adds to the fluidity of the action like the Wayfarer 247, but it still feels different from the 247. The action of the Reate is still sharper and hydraulic. The jimped flipper tab is also sharper, easily grabbing the pad of your index finger. I’d rate the action as a strong “9” on a 0-10 scale. It’s good. Damn good.

Reate Kirby Lambert Crossroads Frame Lock

For lockup we have a bolster lock. Really, it’s a titanium framelock, but the marble carbon fiber overlay distinguishes this knife slightly from your typical full titanium framelock. Something different.

Lockup is bank vault tight. No play in any direction. The lock is easy to disengage thanks to a small chamfer on the inside of the lock bar. One thing I will note is that the edge of the carbon fiber, where it meets the lock, comes to a sharp point at the peak of the finger choil. I don’t think there is much they could have done beyond changing the design of the knife, but it’s there.

Blade centering is perfect on my piece. As I would expect on a knife like this.

Reate Crossroads Review – Final Thoughts

The Reate Crossroads is a beautiful piece. As someone who has pined for a Kirby Lambert custom for the better part of a decade, the Crossroads had the potential to let me down given the hype and anticipation of owning a Lambert for so long. But I’m pleased to say the knife doesn’t disappoint. It’s a beautiful piece featuring top shelf materials, next level fit and finish, and a dynamic design from Kirby.

But it’s not perfect. In some ways it is finished so crisply it’s uncomfortable. There are a couple sharp edges, namely on the back of the blade where the tang meets the stop pin, and where the carbon fiber bolster meets the lock bar. The knife doesn’t carry that well thanks to all the weight at the pivot. Also the heel of the edge is unsharpened. That may just be an issue with my particular knife.

In a perfect world I’d like to see those issues addressed somehow, but I still see these as relatively minor complaints given the overall splendor of the Crossroads. More of a collectable than an a user, but it’s as close as I’ll probably ever come to owning a custom Kirby Lambert.

Reate Crossroads on BladeHQ
Reate Crossroads – From $355.00
From: BladeHQ

I recommend purchasing the Reate Crossroads at BladeHQ or GPKnives. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Collectable Knives, EDC Knives, High End Pocket Knives, Reate Tagged With: bolster lock, carbon fiber, Kirby Lambert, m390, MRBS

Olamic Wayfarer 247 Review

by Dan Jackson 5 Comments

Years ago, when I was in law school and just starting this web site, Olamic came onto the scene with their damascus fixed blade knives. They actually reached out to me, to see if I would write an article on their knives for the site. I agreed, as I thought it was pretty cool that a knife manufacturer actually cared about what I was doing, and they ended up sending 3 knives over for examination.

Olamic Wayfarer 247 Review
Buy the Wayfarer 247 at BladeHQ

Due to some intellectual property complications on their end I was asked not to proceed with the article, but I still had the chance to check out the knives. They were cool, but never something I would have bought for myself. In fact, not even Olamic knows who buys those things. Ultimately I boxed them up and sent them back at their request.

Since then Olamic has continued to make damascus fixed blades in Russia, but they are best known are their high end folders. Olamic means “everlasting” and their motto is “Never the Same”. That’s because they offer the knives in a near infinite number of configurations. Even their logo is the infinity symbol. Pretty cool.

Originally their folders were true custom pieces, and they still make custom knives, but the Wayfarer 247 is more of a mid tech knife. What I mean by that is the basic parts are pre-machined in Italy, and then the folders are completed by hand in California.

This is a high end folder with the basic model starting at $375, but most of them are priced at $500+ with various hand worked finishes. At that price, it’s no wonder it has taken me this long to buy one of these knives. But plenty of people buy them. In fact they appear to fly off the shelves. The high praise intrigued me, so I ponied up and acquired a 247 for review.

General Dimensions and Blade Details

The Wayfarer 247 has an overall length of 8.125″, a 3.5″ blade, and it weighs 5 ounces. The knives are made in America. This is a larger EDC knife. Olamic recently came out with the Busker, which is more of an urban EDC knife with its 2.5″ blade. I’m sure the Busker is more practical as a daily carry, but the Wayfarer caught my eye with its sleek lines.

Olamic Wayfarer 247

The 247 comes in your choice of blade shapes. I went with what Olamic refers to as their “original drop point”. It has a high flat grind, a long swedge, and a fine clipped point. My blade has been given an excellent satin finish, but you can also get the blade stonewashed, coated, or two tone. The grinds are pretty crisp, and the edge is neat and even. There is a sharpening choil so you can easily sharpen the knife all the way to the heel. It’s a nice functional blade shape.

For blade steel we have M390. I think that’s all they are offering the knife in currently, as I don’t see an option for blade steel on their website. That’s fine by me as M390 is good stuff. Relatively easy to maintain, excellent edge retention, good toughness, stainless, it has a proven track record as a high end knife steel.

I bought this knife used off the forums, and it came with what appears to be the used factory edge. The prior owner had nicked it in a couple spots and it was quite dull. So to bring the edge back I started out with my DMT Diafold to work out the nicks. I then switched to the ceramic rods from my Sharpmaker.

Olamic Wayfarer 247 Blade

At that point it was pretty sharp, certainly a workable edge for my basic purposes, but I decided to hone it on my new Spyderco Golden Stone. This is an ultra fine ceramic stone with an interesting ducks foot shape. I thought it would be good for my kitchen knife given the stone’s size and unique configuration, but at this point I’m using it on all my blades. I was able to get an extremely fine hair popping edge with this stone. It is truly an excellent stone and I look forward to reviewing it in the future.

The moral of the story is despite it’s high hardness, M390 is an easy steel to maintain. If I can get it sharp most people will be able to. The knife has held a good edge and has worked just fine for my usual EDC tasks, which these days is mostly opening up cardboard boxes containing cigars and more knives. It makes great carrot sticks as well.

Handle, Ergonomics, and Pocket Clip

The handle is where things start getting interesting. This is a full titanium framelock. Just like all their other knives. You have a wide choice of finishes. My particular knife features holes in the show side slab, a bronze anodization, and their “kinetic earth” finish. The hardware has been anodized as well. The end result is a unique knife.

Olamic Wayfarer 247 Handle

Everything has been beautifully put together. The titanium slabs are thick, and everything has been nicely finished. Perhaps the most interesting feature is the floating backspacer. It’s a cool detail, and has been given the same finish of the rest of the handle. Another detail is the custom pivot. I’m happy to say Olamic includes a pivot tool with each knife. The pivot looks good, but it’s a little more fiddly to adjust than a regular torx or allen pivot, as the tool has a tendency to slip out of the pivot. At least when I’m using it.

Another cool detail is that you can order replacement sets of hardware for your knife. My guess is that this is mostly for those that want to change up the look of their knife, not so much replacing missing hardware, but either way you are covered.

Let’s turn to ergonomics. This is a comfortable knife. First off, it’s quite thick, clocking in at .46″. The thickness combined with the sweeping full size handle gives you plenty to grab onto. The knife fills your hand, and Olamic has done a great job knocking down any sharp edges. The Wayfarer almost feels like a cold stick of butter in your hand. It’s not slippery, but it is extremely smooth and comfortable. It feels unique when compared with everything else in my collection.

Olamic Wayfarer 247 Ergonomics

The simple handle design provides one groove for your index finger to nestle into place. Plenty of room even for larger hands. I suppose if you run out of real estate you can always graduate to the full size custom Wayfarer, but that may require a second mortgage. Rounding things out is a short run of jimping on the spine of the blade. The jimping captures your thumb nicely, and strikes a balance between providing traction without blistering your thumb.

The pocket clip is another interesting detail. The clip borrows heavily from the designs found on the Todd Begg Steelcraft Bodega. Olamic licensed it, so no worries there. The clip is a slab of titanium secured by 3 stand offs and then for retention you have an oversize ceramic ball bearing pressed into the titanium.

The end result is a highly robust pocket clip. Spring tension is excellent, so strong I sometimes have trouble getting this knife into my pocket. No worries about it falling out accidentally I suppose. It’s a good stiff pocket clip, and another high end detail.

Olamic Wayfarer 247 Pocket Clip

In practice the 247 carries well for it it is. This is a big chunky titanium frame lock folder. The chunkiness makes it feel great in hand, but the Wayfarer 247 will never carry like my Spyderco Dragonfly, or even my Native for that matter. But the strong clip keeps the knife securely in place. It’s not a deep carry clip, but must of the knife buries discreetly in the pocket. That’s about all I can ask for.

Deployment and Lockup

This is a titanium framelock flipper. There is a lot of competition in this space, but Olamic spent the time to distinguish their knife from the rest. They utilize caged bearings, a ceramic ball detent, an internal stop pin, and a detent ramp. A detent ramp is a small groove or chamfer milled into the tang of blade. What it does is make the action a little smoother when you close the knife. Rather than the ball detent hitting the tang jarringly, this groove makes rentry smoother and easier. Its details like this that help set the knife apart.

Olamic Wayfarer 247

And the knife does have a different action than anything else I own. The detent ramp and other details give the action of the 247 an almost hydraulic feel. The blade practically “whooshes” open as if there were a pneumatic piston inside. The blade fires hard no matter what, and the action is smooth and glassy. The detent is strong, but the detent ramp and thick handle smooth it out whether you are opening or closing the knife. Opening and closing the blade of the 247 is a uniquely satisfying experience.

Here is a shot of the detent ramp:

Olamic Wayfarer 247 Detent Ramp

Moving towards lockup, we have a titanium framelock with a stainless steel lock bar insert and an internal stop pin. The internal stop pin is another interesting feature. It makes for a simpler design (no visible stop pin), and it works well. There is zero blade play in this knife. No lock rock, no lock stick, no side to side, no nothing. It’s a perfectly executed framelock. You would expect that at this price point, and Olamic delivers.

Here is a size comparison with the ZT 0609:

Olamic Wayfarer 247 vs. Zero Tolerance 0609

A final point is the blade centering. My blade is perfectly centered. I noticed that the pivot came loose during testing causing the blade to wander. and I was able to tighten it back up to true without a problem.

After publishing the review I decided to disassemble the knife. The 247 was straight forward to disassemble. You can see that in addition to caged bearings, there are stainless steel washers to prevent the bearings from wearing into the titanium handles. Reassembly was easy and the knife came back together perfectly.

Olamic Wayfarer 247 Disassembled

Olamic Wayfarer 247 Review – Final Thoughts

Olamic’s goal for the 247 was to build a top shelf titanium framelock flipper that can be customized to the end user, yet still sold at a reasonable price. By and large I think they have accomplished that. I detect very little in the way of compromise here, and that is reflected in the build quality and price tag. Every aspect of the knife has been lavished with attention, from materials selection to engineering to finish work, it has all be carefully considered and expertly executed.

Where the 247 really stands apart is in its ability to be factory customized. A handful of years ago “modding” knives was all the rage. You see less of that these days, but the success of knives like the 247 show that people still care enough to want to have a customized knife. The standard 247 is really a blank canvas, and Olamic will do whatever you want with it. Of course it quickly gets expensive, but that doesn’t seem to deter people.

So that begs the question, a knife like the one shown here retails for approximately $500. For that amount of money, would you rather have the 247 or 2 high end Spyderco’s or ZTs? When I plunked my 0609 down next to the Olamic, I could see where the extra money went. Olamic has succeeded in creating a unique feel for their factory custom framelock flipper. The ergonomics and action are unlike anything else I own. The ZT is an excellent knife for the money, but there is no comparison. Especially if you get a base model 247 for around $350. At that price you get the exceptional flipper action and ergonomics without the additional cost of the extra finish work.

And Olamic doesn’t seem to be competing with these major brands anyways. They are essentially building the Chris Reeve Knives of flippers. Actually, I’m not sure if that is still a fair comparison. While CRK may have shown us what was possible with a high end production folder in the early 2000s, Olamic shows us what’s possible today.

Some will scoff at the robust price tag, but this is a high end knife. It simply isn’t aimed at the price conscious. If you want a titanium flipper framelock with uncompromising quality and the ability to “make it your own”, then the 247 is an excellent choice.

Olamic Wayfarer on BladeHQ
Olamic Wayfarer 247 – From $375.00
From: BladeHQ

I recommend purchasing the Olamic Wayfarer at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: High End Pocket Knives, Made in the USA, USA Made EDC Knives Tagged With: bearings, flipper, Frame Lock, m390, titanium

Giant Mouse ACE Nimbus Review

by Josh Wussow 1 Comment

Last Updated August 14, 2019
Few names in the knife world garner as much respect as Jesper Voxnaes and Jens Anso. Together, they’re a veritable dynamic duo of knife design. So, when the folks at Giant Mouse Knives agreed to send over a loaner of the pair’s new ACE Nimbus model, the clouds parted and I beheld the aura of a truly excellent EDC blade.

Giant Mouse ACE Nimbus
Buy the Giant Mouse ACE Nibus at BladeHQ

Mythical and meteorological references aside, this is a surprisingly grounded tool. Based off a venerable midcentury motorcycle, Anso and Vox drew inspiration from the “rugged, utilitarian design objectives of the Nimbus.” The Giant Mouse website hails it as their “take on a great tool knife… the kind of knife you will love to use for years to come.”

General Dimensions and Blade Details

Let’s start with the Nimbus’ centerpiece – Three inches of flat-ground Bohler M390. This beautiful blade is a full inch tall, with a thickness of 0.14 at its well-chamfered peak. The satin finish provides a glow worthy of its namesake’s Merriam-Webster definition, with beautifully etched logos on the clip side. The teardrop opening hole is rounded along its top (where your finger is most likely to make contact), though the lower edge has been left square.

Giant Mouse ACE Nimbus Pocket Dump

Behind the blade, users will be treated to 4.25-inches of textured G-10, with stainless steel liners and a reversable wire pocket clip. The Nimbus is fairly wide through the hips, exactly twice as tall in the handle (1.1”) as it is across (0.55”). This brings the weight to a not-inconsiderable 4.04-ounces – Hefty, but not bad for a heavy-use tool.

And indeed, this is how Giant Mouse wants us to consider the Nimbus. They advertise it as “the knife you’ll want to keep in your winter coat, backpack, working jeans or toolbox.” In that vein, here’s a comparison with the two other folders I reach for when the going gets tough: The Spyderco Native 5 and Zero Tolerance 0562.

Giant Mouse ACE Nimbus Size Comparison

So, how does it perform? Honestly, this one took a while to grow on me. The blade felt undersized at first, struggling to straddle apples and medium sized onions. The turning point came in the form of several large bookshelf boxes from my construction trailer. These paper behemoths fell to pieces in the face of the Nimbus. Its tall edge glided through six-foot swaths of quarter-inch cardboard, almost reminiscent of a razor knife. Consider me sold.

Giant Mouse ACE Nimbus In the Kitchen

Performance aside, there are additional advantages to a sub-3.5 blade, legality being foremost among them. From city warehouses to country cabins, it’s a knife that can go where the work is.

Giant Mouse ACE Nimbus with a Salad

A few nitpicks: While I love the cutting capability, I actually feel that the blade may be a little under-branded. The ACE and Giant Mouse logos are great, but the show side has been left completely blank. I’d like to see these split, perhaps with one logo on each side, in addition to a mark announcing the M390 steel.

Handle, Ergonomics, and Pocket Clip

The Nimbus is a nice match for my medium/large hand. The humpback design creates a solid grip, especially when paired with the handle’s overall thickness. The thumb jimping is perfectly placed, just forward of the opening hole. The texturing of the G-10 is sublime, marking a nice balance between smoothness and grip. I’d compare it to the feeling of a Micarta handle from ESEE, making it a bit softer than the G-10 on the ZT 0562 shown above.

Giant Mouse ACE Nimbus Ergonomics

The weakest point of this ACE’s ergos lies in its lockbar. The slight scallops cut for thumb traction tend to rest in the joint of my index finger, causing a bit of a sawing effect under heavy grip. It’s not a major issue, and just mentioning it makes it sound like more of an issue than it really is. At no point did I develop a skin irritation because of this bit of texturing. Still, you’ll certainly know it’s there.

Speaking of touchy spots, take a look at the tip in the photo below. More specifically, check out how close it is to the top of the liners.

Giant Mouse ACE Nimbus Blade Tip

Yeesh. While it’s not close enough to catch a finger as it slides across the surface, this is my strongest criticism of the knife. A slight alteration in the blade’s angle would have dropped the point safely beneath the surface. As it is, it’s not close enough to be considered a fatal flaw. But you’ll definitely want to mind the gap, as our British friends say.

The wire clip, too, is something of a conundrum. While I’m a huge fan of its overall design and deep-carry function, it does create a minor hotspot in the palm. The pros outweigh the cons here, so I’m happy with it overall.

Giant Mouse ACE Nimbus Pocket Clip

Let’s take a moment to talk about the internals. The folks at Giant Mouse were kind enough to allow me to take the Nimbus apart, and I’m very glad they did. Take a look at the full breakdown:

Giant Mouse ACE Nimbus Disassembled

Beyond the solidity of its machining, there’s some excellent detail work here. The badging on the liners is very attractive, and obviously meant to be enjoyed by tinkerers such as myself. Then there are the washers, inset with a race track for the bearings. There’s so much to like here, and the disassembly process is relatively straightforward. My lone complaint lies in the free-spinning pivot, which requires a TORX driver on both sides for takedown and dial-in. Otherwise, this knife’s maintenance process was a breeze.

Deployment and Lockup

Giant Mouse said it best themselves: “If you are looking for a trick knife to middle-finger flick and play with during office breaks, we have other options coming in the ACE-line.” This held true throughout my time with the Nimbus.

Giant Mouse ACE Nimbus Review

While the finger hole is certainly capable of producing snappy opens, this isn’t exactly a fidget-friendly tool. For one, the lack of a flipper tab/blade guard makes it possible to flick the edge down onto your thumb during closure. It didn’t happen to me, but careless users may find themselves with a nick or two if they’re not careful. This isn’t something I’d consider as a flaw, especially since Giant Mouse straight up warns you that this is a function-first knife. Still, lockup is solid and satisfying, with the linerlock leaf snapping into place flush with the clip side of the blade tang.

Giant Mouse ACE Nimbus Pocket Dump

Dialing the action in can take a bit after disassembly, due to the nature of a free-spinning pivot. But once you have the screws in right, you’re left with nothing but smooth solidity.

Giant Mouse ACE Nimbus Review – Final Thoughts

The Nimbus looks, feels, and cuts like a $175 knife – Every inch, every penny. From its excellent construction to the thoughtfulness of its design, this is a rare case where the silver linings outshine whatever troubles make up the cloud. Fans of Anso and Voxnaes will find a lot to like here, and newcomers can use it as a primer for their design philosophy. At the risk of making a pun, the folks at Giant Mouse… Well, they ACE’d it.

Giant Mouse Ace Nimbus on BladeHQ
Giant Mouse ACE Nimbus – From $175.00
From: BladeHQ

I recommend purchasing the Giant Mouse ACE Nimbus at BladeHQ or Amazon. Thanks for reading.

Filed Under: EDC Knives, Folding Knives Tagged With: Jens Anso, Jesper Voxnaes, m390, Made in Italy

  • « Go to Previous Page
  • Page 1
  • Page 2
  • Page 3
  • Page 4
  • Go to Next Page »

Primary Sidebar

Follow Us on FacebookFollow Us on TwitterFollow Us on YouTubeFollow Us on RSS

Subscribe to Email Updates and Never Miss a Review (No Spam)!

Enter your email address:

Delivered by FeedBurner

Shop BladeHQ

Shop Outdoor Gear on Amazon

Shop KniveShipFree.com

Search BladeReviews:

Best of BladeReviews:

Best EDC Knives
Best Survival Knives
Best Tactical Knives
Best High Value Knives

Copyright © 2025 · Log in