Lucas Burnley

CRKT Squid Review

I’ve listened to Gear Geeks Live practically since its inception. My commute is around 4 hours round trip, so that’s a lot of time spent in cars trying not to look at my smartphone, and podcasts help with that. One particular episode is always easy to recall, and that’s the episode where Thomas W. (of KAI USA) drops in for an interview/argument. While most of that episode was spent arguing over whether the Cryo 1.0 is a good knife, one of the tidbits teased was that Kershaw was going to dive into the sub-$20 waters with a new product line.

Buy the CRKT Squid at BladeHQ

Buy on Amazon

It sucked.

One could argue that this line was doomed to failure because of its dedicated use of 4Cr14, that they looked like the gas station knives Nick Shabazz has so much fun with, or because they all weighed more than a brick shithouse with a full septic tank, but I think the real reason they flopped was different. That reason, you ask? Simple. There’s already an apex predator in these waters, and that’s CRKT.

Before anyone cries Gerber, they don’t count. I’d sooner go near a blender in a Gremlins remake. No, the real top dog in the world of truly budget blades is Columbia River Knife and Tool. They’ve had their problems, sure, but on the whole their budget knives have been quietly successful among enthusiasts and big box shoppers alike. The CRKT M16 is the gateway drug for many a poor knife nut’s wallet.

Enter the CRKT Squid. Designed by Lucas Burnley, the Squid is based off the custom offering of the same name. Burnley is better known for the now ubiquitous Boker Kwaiken, but the Squid has a surprising following. Not only is there enough interest to warrant several special editions, but there’s enough demand that a small market for custom scales has popped up. How could a $15 knife be compelling enough to warrant this attention?

General Dimensions and Blade Details

This knife is portly. It’s an all steel 3.5 oz sandwich, and there is no getting around that. The 2.25” blade is housed in a 3.5” long handle. I won’t sit here and try to convince you that the weight is a practical issue: it isn’t. The balance isn’t great, but other than that, the Squid’s weight won’t come up in use. I’m still not a fan. There’s an argument to be made that more weight is a selling point for big box consumers, as they equate weight and quality. I won’t denigrate people who feel that way, but I know better than them and they’re wrong I respectfully disagree.

Overall the Squid is well made, especially considering the price point. Centering is good, the grinds are even and clean, and there aren’t any stray machining marks. The one complaint I can register is the aluminum backspacer. First of all – and I know this is subjective – it’s ugly. The off-silver/greyish color doesn’t look right alongside the stonewashed steel scales. Just anodize it. Black, green, blue, whatever. It’d fit the ‘cute’ aesthetic the Squid already has. Second, the backspacer is ground unevenly. It’s not a practical concern, but I’ve whined about lesser sins.

This knife cost me just north of $15.00. It has 8Cr13MoV. What else did you expect? It’s a budget steel, but a fine one, all things considered. I haven’t experienced any rust, and the microchipping I did run into vanished after a few passes on the Sharpmaker. Regular stropping is recommended. It’s listed as a hollow grind, and the stock isn’t very thick; only .11”. Unfortunately it’s not a particularly thin hollow grind, nor is it very high, which makes it somewhat thick behind the edge. For cardboard, paper, or packages, you’d never notice an issue. I did during food prep, but how often will you use a 2” knife in the kitchen? I’m guessing somewhere between ‘never’ and ‘when it’s the only knife that can cut.’ Is it a big deal? No, but it caught me off guard.

Handle, Ergonomics, and Carry

Normally, I open up this section with a bit on the visual appeal of the handle. I try to answer questions like: is it attractive?, was it difficult to produce?, etc. For whatever reason, I can’t do that with the Squid. I’m not saying that the Squid is unattractive, but I think I’d be blowing smoke up the readerships’ collective asses if I tried to praise it effusively. The stonewash is nice, I suppose; but nothing that gets me out of my seat.

The ergonomics are okay. I haven’t noticed any hotspots, but the stainless steel handles are pretty slick. It’s a slim knife and doesn’t fill the palm very well. The custom versions appear to have thicker, contoured handles which would alleviate the aforementioned problems. Without a lanyard, the Squid is definitely a three finger knife, but on a knife this small you can’t exactly expect more.

Given its weight, I was surprised to find that the Squid was a pretty quiet companion. For the most part I carried it at work, which means thick pants and a good, sturdy belt to support those extra 3.5 oz. The clip allows for discreet carry, and everything about the Squid that makes the grip questionable makes it carry like a dream.

Deployment and Lock-up

Deployment on the Squid is a fairly simple affair. The thumb studs are well placed and not pokey enough to snag on pockets or split your finger. Sure, the detent is a bit weak for my taste, but you can slow roll or coin flip the Squid open, and that’s what counts. Teflon washers give the action a bit of a hydraulic feel. Not so nice that I develop carpal tunnel from flicking it, but on par with much more expensive offerings.

Regarding the lock, there really isn’t much to say. It’s a stainless steel framelock. I haven’t experienced any lock rock or blade play, and due to the absence of titanium there’s certainly no lock stick. However, I’ve experienced all three of those issues on framelocks that cost ten times what the Squid does, so maybe this is more of a feat than I’m giving CRKT credit for.

CRKT Squid Review – Final Thoughts

Ultimately, I don’t think I’ve bought into the Squid’s popularity. Don’t get me wrong, I understand why it’s as popular as it is. The Squid hits most of the ‘hype’ buttons the Cryo did at a lower price point, has (in my experience) better F&F, and in my opinion features a more attractive design. That said, it’s quite heavy for its size, the ergonomics are wanting, and it’s called a squid when that is clearly the body of a cuttlefish.

Furthermore, reviewing this knife has given me some perspective on the cottage industry surrounding the Squid. Most of my quibbles could be solved by a replacement scale: the weight would be cut by a third, the slick handle could be replaced by a more tactile material, and while I’m at it I could get that backspacer replaced. Will I order one? It isn’t likely, but hand me enough bottles of porter and you never know what might happen.

How does the Squid stack up to the competition? Well, that’s tough to answer. I’ll stand by my claim that CRKT is the boss hog of budget blades, but once you get up into the middle tier value knives it’s a different situation. As much as I put down Kershaw’s sub-$20 products, anything they produce around the $50 mark is pure gold. If you can save up it’s probably worth your time to do so.

Still, it can’t be overstated that $15 is a far cry from $50. For the money it’s tough to beat out the Squid. The design is friendly enough that your co-workers won’t be wigged out, useful enough that you’ll always be glad to have it on you, and cheap enough that you won’t regret buying it if you do purchase more expensive knives down the line. If that sounds appealing, give the Squid a shot. I’m glad I did.

CRKT Squid Folding Pocket Knife: Compact EDC Straight Edge Utility Knife with Stainless Steel Blade and Framelock Handle - Black Stonewash 2490KS

Enhanced Protection: Black stonewash is durable and ages well
Maximum Control: On blade friction grooves for grip
Low Profile: Pocket clip provides secure carry
Designed by Lucas Burnley in Bend, Oregon
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend purchasing the CRKT Squid at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Boker Kwaiken Flipper Review

by Dan Jackson 6 Comments

Last Updated: January 10, 20198
Back when the original Boker Kwaiken came onto the scene I was pretty excited. Modeled after knifemaker Lucas Burnley’s custom offering, this sleek design looked too cool to resist. That is, until, reviews started to pour in. People stated that the knife was difficult to open and the tip of the blade protruded out from the handle to the point where it would inadvertently cut you. No bueno. My excitement instantly turned to disappointment. Rather than buy the knife, and then slog through writing a review of something that I knew I wasn’t going to be happy with, I just decided to skip the Kwaiken entirely.

Buy the Boker Kwaiken at BladeHQ

Buy on Amazon

Despite the poor reviews, the Kwaiken developed its own cult following. This is thanks in great part to those in the knife customization crowd. Knifemaker / knife modder Alexander Dietz developed his own cottage industry around the “Dietz modded Kwaiken”. Clever dremel work converted the clunky Kwaiken into a nice little flipper. Whether Boker listened to customer feedback, or was planning on doing this anyway, they eventually offered their own flipper version of the Kwaiken.

This knife was hotly anticipated by many collectors, including myself, partially because it appeared to address some of the issues that plagued the original Kwaiken: the inability to open the knife easily, and the renegade tip. If that wasn’t enough, this time Boker decided to slather the knife in titanium. Bearings, flipper, titanium, and a fresh design from a hot custom knifemaker – yup, this one follows the formula that many enthusiasts are looking for these days.

I am going to see if this updated model is worthy of the hype, or is more of the same.

General Dimensions and Blade Details

The Kwaiken Flipper has an overall length of 8.375″, a 3.5″ blade, and it weighs 5.4 ounces. I hate to sound like a weight weenie but the first thing I noticed was how heavy this thing felt. It is a chunky knife and feels like a little metal brick. You would think that the relatively thin titanium scales would actually shave weight off the Kwaiken, but it’s over an ounce heavier than it’s non-flipper counterpart. Personally, that relegates the Kwaiken Flipper more towards the collectible category, and away from being a true EDC. Regardless, I am sure plenty of guys will enjoy carrying this knife, and there is nothing wrong with that.

The blade shape is a modified drop point. It is a sleek and dramatic blade shape that tucks perfectly into the thin handle. The tip is very fine and the knife is well suited for stabbing things. It has a hollow grind and the blade finish is very nice. The lustrous stonewash hides wear well and is more resistent to corrosion than a beadblast. For what it is, I like this blade shape.

Steel on my particular knife is Aus8. Given that this knife sells for more than $100, I heard quite a few grumblings about the choice of steel on both this and the original Kwaiken. Given that this knife was made in China, I don’t think Boker had a ton of options to choose from. Still, 154CM, S35VN, or some other higher end steel would have been nice given the price point. Personally I don’t have a problem with AUS8. It’s a hearty steel that sharpens easily and is fine to see on user knives. I can totally understand if some folks take issue with the AUS8.

Since purchasing the knife months ago, it looks like Boker now offers the Kwaiken flipper in an “upgraded” steel: V10. I wouldn’t call VG10 a huge upgrade over AUS8. In fact, I prefer Aus8 because I find it a little tougher than V10. Neither are fantastic edge holders but for EDC work they will get the job done.

Handle, Ergonomics, and Pocket Clip

The compact handle of the Kwaiken flipper is built like a little titanium tank. Thick full steel liners are under generous 3-d machined pieces of titanium, all supported by a solid titanium backspacer. Construction is simple and solid.

I really like the minimalist look of this handle. The way the liners shadowbox the titanium scales, and how the closed blade hides completely within the handle make for a very attractive design. The handle has a monochromatic appearance, although upon close examination the steel and titanium are slightly different colors. I am sure many knife modders view this piece as something of a blank canvas. I hate to spoil the party, but I enjoyed the look of the original Kwaiken with its micarta handles, and would prefer the contrast and lighter weight of micarta over the heavy titanium version. Still, the build is very good and the added weight does make the knife feel very substantial.

The Kwaiken Flipper feels good in hand. The simple design means this knife will work for a lot of people with different size hands. There is no jimping or really texture to speak of, which could be a good or bad thing depending on your preference. The only ergonomic “feature” is that the flipper doubles as a forward finger choil, allowing you to choke up on the blade a bit for more controlled cuts. All said I don’t have a problem with the way this knife handles and didn’t notice any hot spots or other ergonomic issues.

The pocket clip is a right side tip-up only affair that mirrors the design of the handle shape. It is simple and unobtrusive, and I like the way it looks. It holds the knife in your pocket pretty well, although I think the spring could be a hair stiffer. This is a heavy knife and the handle is smooth. While it has never fallen out of my pocket it doesn’t take a ton of effort to pull it out. I think a little more clip strength would be valuable here.

Deployment and Lockup

Obviously this knife uses a flipper for deployment. I am somewhat puzzled by the design of the flipper tab as it actually bows out where the index finger goes for deployment and is sort of slippery. It works but I think it could been designed to be a little easier to open. Still, the knife opens with a snap and flips well, thanks in part to the IKBS bearing pivot system. The detent is OK. It’s not going to flip like one of the new ZTs or anything, but the detent is adequate and the knife flips open with a snap.

For lockup you have a stainless steel liner lock. Mine engages around 90%. The steel is thick and the lockup feels very reassuring. There is no blade play or lock stick. This is a well implemented liner lock. The blade on my knife is pretty much centered.

Boker Kwaiken Flipper Review – Final Thoughts

The Kwaiken Flipper is a cool design and has been well implemented. I know it has been a good seller for Boker, and when you look at it on paper it is easy to see why. That said, I’d love to see Boker continue to refine this one as it is such a nice design. They have already moved in that direction by upgrading the blade steel, but I think they should also explore offering a lighter weight version of the flipper with a different handle material. I think the inclusion of both stainless steel liners and full titanium handle scales is a bit overkill and adds unnecessary weight.

I haven’t mentioned this yet in the review, but this is part of Boker’s “Plus” line, and is manufactured in China. Fit, finish, and general quality is very high on this knife despite being manufactured in China.

Also, I’m almost glad they didn’t go with a framelock here given Boker’s history of issues with titanium framelocks. I’d rather see a well implemented liner lock, than a messed up frame lock.

In closing, this is a cool little design and a memorable offering from Boker. I recommend it if you are into the design and are OK with the weight.

BOKER Plus 01BO296 Kwaiken VG-10 Pocket Knife, Titanium

VG-10 steel blade with flipper
Titanium handle scales
Liner lock mechanism

I recommend purchasing the Boker Kwaiken Flipper at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

CRKT Obake Review

by Dan Jackson 18 Comments

Long time readers know that I have always had a soft spot for pocketable fixed blade knives, and CRKT has proven on a number of occasions that they know how to make them. So the announcement of the Obake, a compact fixed blade collaboration with CRKT and custom knifemaker Lucas Burnley, definitely caught my attention.

Buy the CRKT Obake at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00I04SZMI” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

Lucas is best known for his Kwaiken Flipper, an elegant Japanese inspired design. CRKT’s decision to pick up Burnley’s fixed blade variant of the Kwaiken strikes me as a smart decision given the immense popularity of his Kwaiken series of knives.

The result is a mash-up of traditional and tactical that marries a classic Asian aesthetic with contemporary materials all wrapped up at a sub $40 price point.

General Dimensions and Blade Details

The Obake has an overall length of 7.63″, a 3.64″ blade, and weighs 2.4 ounces. While some of my other favorite CRKT fixies; the Minimalist and SPEW, are firmly in the EDC knife camp, I think that the Obake is more of a “tactical” (self defense geared) offering. This is due to the relatively large size of the knife and its shank-like construction. The full tang knife is ground from .13″ thick steel and has a thick grind emphasizing strength over slicing performance.

This isn’t a knife that I like to peel apples with, but it definitely could blow through one if you felt so inclined. While I consider this larger than an EDC knife, it is still slim and streamlined, and tucks away discretely in your waistband or pocket (more on that below).

The Obake sports a slender drop point blade. The tip is fine but it has enough meat behind it to work into wood and get some work done. The spine has been gently rounded which is a nice detail that CRKT has integrated into more and more of their offerings. Perhaps the most striking aspect of the blade is the aggressive acid-etched finish. When I took this knife to my monthly knife collector’s club meeting, I had a couple people ask me if the blade was made of damascus. Nope, it’s just good ole fashioned 8Cr14MoV given a deep acid etched finish.

8Cr14MoV is a budget friendly Chinese stainless steel. I like it for its ease of sharpening and toughness, and the price is tough to beat. Here the knife has been heat treated to between 56 and 58 HRc. It has held up well against the mild chores I have put the knife to; mostly cardboard and some food prep. The knife is not an incredible slicer due to the thick blade stock, narrow profile, mid height hollow grind, and textured blade finish, but you can certainly open mail and break down boxes with it if you need to. My guess is that the Obake is best suited in a self defense type role, which is a role that I know very little about. That said, it doesn’t take a PhD in material science to realize that this design can stab very efficiently. So if a stabbing implement is what you need the Obake could be a good option.

Handle and Ergonomics

One of my favorite parts about the Obake is how they approached the handle. In paying homage to the Japanese roots of the Obake’s design, Lucas Burnley originally offered the knife with a traditional wrapped handle over rayskin. CRKT followed suit with a cordwrap over a synthetic ray skin. I wasn’t sure what to expect from a sub $40 knife, but they actually did a really nice job with this. The cord wrap is tight and well done, and the rayskin looks pretty legit. I really don’t know how well this will hold up under hard use, but in my daily carry the handle has worn well and still looks pretty good. Then again I didn’t roll it around in the dirt or go scuba diving with it, but if you are reasonably careful with it I see no reason why it won’t hold up for a good long time. Underneath the wrap and ray skin is a full tang blade.

From an ergonomic standpoint, the handle is generous enough to support a full 4-finger grip and the knife is as comfortable as you would expect. The cord wrap provides a lot of traction and the simple design fills the hand and works in both forward and reverse grips. I’m no martial artist so I really have no idea how this would stack up compared to other offerings, but I found it comfortable.

Sheath

The sheath for the Obake is a nice low profile molded plastic sheath. The sheath is almost always the Achilles heel on a budget fixed blade, so I’m pleased to report that CRKT has done this one right. Retention is very firm. At first I really needed to jerk the knife out, and to this day it requires a strong pull to break the knife free from the sheath. CRKT has also offered several eye holes and slots for various mounting options.

Lucas Burnely has an interesting suggestion for carrying the Obake. He has designed the knife for in the waist band (IWB) carry. Lucas suggests that you secure the paracord lanyard to your belt, stuff the sheathed knife blade first into the waist band, and then when you need to use the knife, grab the handle and pull it hard away from your body. The blade will pop out of the sheath, and the sheath will stay tethered to your belt. I’m probably not doing a great job explaining this, but the idea is that you can quickly and safely access the knife without losing the sheath.

In practice I have found this method of carry to work well. I’ve been a fan of using a lanyard with a small fixed blade, attaching the lanyard to my belt, and carrying the knife in pocket, but the Obake is a little longer than say, the Folts Minimalist. The knife is slim and light and disappears on your belt line if you leave your shirt untucked.

CRKT does supply a 550 cord lanyard and skull lanyard bead. I’m not big on skulls (I guess I’m not that hard), but I am sure this will appeal to a number of folks, and must admit that a bead of some sort rounds out the package nicely.

CRKT Obake – Final Thoughts

For those seeking a slim “tactical” fixed blade knife, the Obake is well done and priced to sell. I think that the juxtaposition of modern and traditional combined with a high level of fit and finish lend it broad appeal. I also found the selection of materials and finishes very interesting. Although I am not a martial artist by any stretch of the imagination, this is still a fun knife to have in the collection and it is easy to carry. Mechanically speaking, the 8Cr13Mov steel is adequate and while the sheath is excellent. I really enjoy the details like the faux ray skin and rounded spine.

One other thing I find worth noting about the Obake is that there is nothing else like this on the market at this price. CRKT has been hitting their stride lately with some bold collaborations with hot makers. While some companies have seemed to stagnate over the past couple years, CRKT is gaining ground as they straddle the crossroads of high value and high design. That kind of approach doesn’t always pan out, but knives like this and the Swindle strike me as great examples of when this strategy really pays off.

This is is something of a specialized tool, so I won’t give it a blanket recommendation to anyone browsing the site, but if you are interested in the Obake I would definitely recommend it. It is a complete package at a sub $40 price point, and they are going to have a hard time keeping up with the demand.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00I04SZMI” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

CRKT Obake – From $37.95
From: BladeHQ

I recommend purchasing the Obake at BladeHQ or [easyazon-link asin=”B00I04SZMI” locale=”us”]Amazon[/easyazon-link]. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.