lockback

Spyderco Matriarch II Review

The Spyderco Matriarch’s predecessor, the Civilian, carries a somewhat curious warning. As the company writes on the knife’s product webpage, “Because of its distinctly specialized features it is not intended or designed for general utility or everyday use.” Reading this and knowing nothing about the Civilian, the layperson might wonder why a consumer might spend upwards of $250 on a knife that he doesn’t plan to use much—if ever. But if said layperson were to lay eyes on the deployed blade, an “ah-ha” realization would follow swiftly thereafter.

Buy the Spyderco Matriarch 2 at BladeHQ
Buy on Amazon

In essence, the Spyderco Civilian is a pocket velociraptor claw. It has a thin profile and aggressive serrations to rip through clothing and soft tissue. Make no bones about it: the Civilian is explicitly for self-defense against human assailants. Designed in the 1990s for law enforcement officers who couldn’t carry a gun in certain situations, it is a brutally effective “second best” option that can be wielded by an inexperienced user to disable a combatant as a matter of last resort.

The Civilian, however, suffers a few well-known drawbacks. First, the tip is legendarily fragile (probably the reason for Spyderco’s warning not to use it outside of dire circumstances). Second, and perhaps more importantly: it’s expensive at MSRP, but combine that with limited production and a demand that never seems to abate, and it’s not uncommon to see them sell north of $300.

Enter the Matriarch II. If not a direct replacement for the Civilian, the Matriarch II retains the same purpose-built design of the Civilian at about half the cost. Some might hear “half price” and wonder if the Matriarch II is an inferior copy or an exercise in cutting as many corners as possible. Much to the contrary, the Matriarch is a knife that adds enough features that I’d consider it an improvement over its infamous big brother.

General Dimensions and Blade Details

Let’s not bury the lede: The Matriarch II gives you 3.57” of a “reverse-S” serrated blade, and a hollow, chisel-shaped grind further helps the knife to cut and slash. The reason for that “S” shape, incidentally, is that any kind of material (organic or inorganic) will be naturally directed from the tip into the hollow of the blade during a natural arc of travel. It’s a scary one-two. The thin tip digs in deep, and the remainder of the blade saws and cuts to extricate itself as the user pulls away.

In direct comparison to the blade of the Civilian, the Matriarch II has about a half-inch less of length to work with and a more robust tip. From Spyderco’s perspective, this likely cuts down on the number of broken knives returned for service while not losing hardly anything by way of self-defense effectiveness. It also means that the Matriarch II is more at home in an EDC capacity, where that last eighth-inch of tip can be used to dig into tape and envelope seams. Even given the changes to the profile, you have to look far and wide to find something more intimidating.

As for the rest of the knife, the Matriarch II mates its S-curve blade into just under 5” of handle and a weight of about 3.5 ounces. At only .44 inches thick, the Matriarch II is deceptively thin and light. As such, it easily checks that most coveted of boxes for any self-defense tool: you can carry it all day and forget it’s even there.

As you’ll notice from the photo, where it’s nestled between Spyderco’s Para 2 and Ontario’s Rat II, the Matriarch II offers significantly more length. However, that extra length is unnoticeable in most pockets and it’s a far flatter carry than either of the accompanying EDC stalwarts.

Handle, Ergonomics, and Pocket Clip

One of the biggest factors that differentiates the Matriarch II from the Civilian is the use of fiberglass-reinforced nylon (FRN) over G10. Don’t think of this as a downgrade. In my opinion, the square texture Spyderco uses on its FRN is one of the grippiest and best in the business. This absolutely will not slip out of the hand, and the finger grooves further help the knife to stay anchored.

The ergonomics are quite interesting. The Matriarch II shares the same body and construction as the fourth-generation Endura, differing only in the blade itself. Never having owned or held an Endura, this was altogether new to me.

Basically, there are two good grip options. With the thumb placed on the back of the blade, you have more control over the tip and an extremely secure grip. However, one can also align the middle finger in the finger groove lower down the knife and place the thumb along the grooves on the back of the handle, permitting about another inch of reach.

Normally I look for a more pronounced index finger groove or some kind of guard on a self-defense knife. Here it’s a total non-issue. The Matriarch II is absolutely not made for making push cuts. If the blade stops on anything solid, it’s going to be pulled out and away from the hand during any kind of cutting task. Ergonomically, the handle is perfect for the intended use.

Onto the pocket clip. The tip-up carry design exposes about a full inch of handle, so people will see you have a knife if they’re looking. Fortunately, the aftermarket comes to the rescue: since this is again identical to the Endura 4, a variety of deep carry clips are available, such as those available from Lynch Northwest or MXG Gear.

Deployment and Lockup

The Matriarch II’s “wave” opener, licensed from Emerson and incorporated here, is an undeniable upgrade over the original Civilian model. As the knife is pulled out of the pocket, the wave protrusion hooks into the fabric of your pants and basically deploys itself. I’ve read about this several times, but this was actually the first knife I’ve owned to actually have the feature.

I’ll say this: it’s hard not to pull this knife out of the pocket without the blade kicking out. It is the fastest deployment system on a folder, bar none. You will want to be very careful when removing this from your pocket at the end of the day, lest you get bit or rip a hole in your jeans. I can only reliably get the knife out of my pocket in the folded position by holding the blade shut against the handle throughout the draw motion. This is an annoyance on a utilitarian EDC, but a welcome feature on a dedicated self-defense tool. If you need the Matriarch II, you will likely need it quickly.

Fortunately, the ease of deployment with the wave counteracts the biggest flaw of the Matriarch II: from the factory, the action is stiff as all get-out. This is a criticism I’ve heard leveled at a number of Spyderco’s back-lock designs, but those used to handling a Tenacious or a Paramilitary of any kind are in for a rude awakening when they try to middle finger flick this thing.

The thumb hole is functional, but only in combination with an aggressive, do it like you mean it wrist snap. The blade locks up bank-vault tough and is perfectly centered, but boy howdy does it require some force to overcome the lock bar tension, especially right out of the box. Again, this knife deploys fine with gross muscle movements, but it does not take kindly to the kinds of fine motor control manipulations that make a knife fidget friendly. Perhaps it wants you to really know that this is a tool, not a toy.

The tradeoff to the stiff action is faultless centering and lockup. Deployed, the Matriarch II feels very much like a fixed blade, and I have utter confidence in the action’s strength.

Spyderco Matriarch II Review – Final Thoughts

There’s often ample overlap between gun people and knife people, and it’s by no means accidental. I would wager that most of the members of either group have spent some time musing about the harsh realities of defending life and limb and at some point came to the conclusion that some options are better than others.

The Matriarch II is the most gun-like knife I’ve yet to come across. It’s the easiest crossover knife to convert someone who carries into the world of folding blades, and it’s a design that necessitates the same kind of respect and caution one would give to a loaded firearm. My desk drawer is filled with a lot of designs that are quirky and fun and I happily screw around with them. The Matriarch II is not one of those knives.

At the end of the day, and given the primary use of a knife like this, you’ll know if this is for you or not. And if you do need to draw the Matriarch II in defense of life and limb, may God help the poor son of a bitch who’s on the other end of it.

Spyderco Matriarch 2 Lightweight Knife with Emerson Opener and 3.57" VG-10 Steel Reverse S Blade - SpyderEdge - C12SBK2W

Dynamic Blade Design: Features a 3.57-inch VG-10 stainless steel blade with a unique 'reverse-S' serrated edge and hollow grind for exceptional cutting and slashing performance.
Superior Quality: Its SpyderEdge VG-10 Stainless Steel blade is scientifically designed to maximize cutting performance.
Dependable: One of the vital features of the Matriarch 2 are its sturdy back lock mechanism, four-position clip, and Trademark Round Hole.
Ergonomic: It ensures unmatched carry versatility and high-speed deployment with either hand.
Easy To Carry: By adding an Emerson Opener: a small integral hook on the spine of the blade: the latest version of the Matriarch 2 raises the bar even further by offering the ultimate in high-speed deployment.

Editor: I recommend purchasing the Matriarch 2 at BladeHQ or Amazon. Thank you for reading.

Victorinox Hunter Pro Alox Review

by Dan Jackson 8 Comments

The term “Swiss Army Knife” conjures up a certain image. It’s arguably the most universally recognizable pocket knife, spanning the gulf between lay person and hardcore knife enthusiast. These knives are universally popular in part because they are universally useful. Sure, the models with 20+ tools begin to border on the absurd. Fun, but maybe not functional. But models like the Cadet and Pioneer can be appreciated by the collector and average person alike.

Buy the Victorinox Alox Hunter at BladeHQ
Buy on Amazon

And for many these will be the first knives they handle. Whether it was quietly taken from dad’s bureau on a long summer afternoon, or openly handed around the camp fire in Boy Scouts, the SAK conjures up all manner of nostalgia.

In many ways it’s that standard Swiss Army Knife formula that makes these endearing. They haven’t changed a whole lot since childhood. Little pill shaped handles housing tools we have come to know and love. The penknife, the bottle opener, the nail file, the tweezers and tooth pick. They follow us along through life and settle comfortably into a shelf on the closet, or in a desk drawer, for our own children to eventually discover. It’s a virtuous cycle, and not a terrible business model either.

Victorinox has made small innovations over the years, but the designs remain largely unchanged. The Hunter Pro Alox is a significant departure from the pill shaped slip joints. It’s a big knife with a single blade. It comes with an ergonomic handle, a back lock, and pocket clip. It may seem trivial to you and me, but this is something of a big deal to a company whose product has remained mostly unchanged for over 100 years.

The question is whether the Hunter Pro is truly something significant. Does it mark a change in how we think of Swiss Army Knives? Or is it merely a novelty? This knife was provided to me by Victorinox free of charge. All thoughts are my own.

General Dimensions and Blade Details

The Hunter Pro Alox has an overall length of 8.875″, a 3.875″ blade, weighs 6.25 ounces, and is made in Switzerland. This is a large folding knife. Not just for Victorinox, but for any company with the exception of Cold Steel. I was puzzled by the purpose of this knife. Puzzled to the point where I had to look to the company’s literature to understand what they were aiming for with this piece. According to Victorinox, this is a “cross-over” between an outdoors knife and an urban EDC. I don’t know.

Here’s a size comparison with the Spyderco Endura. Sorry for the blown out picture, and the dark pictures on this review. Was playing around with the camera settings and it was not a particularly good idea.

The knife is massive, which doesn’t necessarily bother me, but the weight of it is distracting. Admittedly I have the Alox version, which is the heaviest. Victorinox also offers the Hunter Pro with walnut handle covers or plastic handle covers. Either one of those shaves about 3/4 of an ounce off the weight. The Hunter Pro could be a fun choice for a camp or hunting knife, but this ain’t no EDC. Not in my book at least.

The blade is a near 4″ drop point. It curves gracefully like a whale, lending a utilitarian vibe to what may otherwise be considered a big freaking knife. This gentle giant has been designed for utility. There is a saber grind, and small swedge. The entire blade has been given a matte bead blasted finish. The Victorinox logo and “Swiss Made” have been engraved into the blade.

I am unsure on the blade steel for the Pro Hunter. Presumably it’s the same stuff used in their other knives. So far it has proven to be servicable. It takes a fine edge, holds it for a decent amount of time, and is easy to sharpen with a ceramic rod. Victorinox also offers the Pro Hunter with a Damasteel blade as part of a limited edition release they did for 2020. This limited edition is retailing for $400, so I’m not sure how many of those you will see in the wild.

In practice I’ve used my knife on cardboard and some light food prep. It’s starting to get hot in Florida, and most of my time outdoors has been spent on my bicycle, or mowing the lawn. Can’t say there have been many camp fires since the temps breached 90 degrees. And that may be where the Pro Hunter really belongs: at a camp site dicing root vegetables, and sharpening sticks.

The name “Pro Hunter” implies that this would be a choice for dressing game. Alas I’m not much of a hunter, and haven’t had the chance to butcher anything with it besides a bag of bacon. It creates lardons with the best of them.

Handle, Ergonomics, and Pocket Clip

The Pro Hunter Alox has full steel liners, aluminum handle scales, and a solid steel backspacer. The closed length is almost 5.5 inches, so that’s a lot of material and a lot of weight. But everything has been nicely finished. All the parts line up neatly, and the Hunter Pro feels well made. The bright aluminum handle and jaunty bias to the Victorinox cross give it an almost ceremonial appearance. As if this knife could be used at a coronation… or perhaps a circumcision.

One nitpick is that the handle is riveted together. That’s fine for a $30 knife, but given the price tag of this model hovers around a hundo, I’d like a knife that can be disassembled and cleaned. Especially if it’s geared towards hunting.

The Pro Hunter feels cool and comfortable in hand. The edges of the alox handles are rounded, and even though there are a series of finger depressions, there are no hot spots to speak of. And there is no lack of room on this oversize handle either. For traction, you have the signature Alox pattern on the sides of the handle, and a short run of mild jimping on the spine of the blade. Aluminum has never been considered a high traction material, and this knife is not a paragon of traction, but for normal use I found it comfortable. Wood or plastic would be a good choice for outdoor use, but the nice thing about this bright red handle is that you won’t lose it on the forest floor.

This is the first Swiss Army Knife that I have seen with a factory pocket clip, and Victorinox appears to have put a lot of thought and energy into it. This is right side, tip up only deep carry clip. It’s large, and I think that was necessary given how hefty the knife is. The clip’s spring tension is good, and the knife is held in place, but this is a knife that you will notice in the pocket. I’ve never been a belt and suspenders guy, but the Pro Hunter has me thinking about it.

This is a somewhat discreet knife in the pocket. The knife buries completely, but the large pocket clip stands out next to denim. Here is you in the pocket shot:

Deployment and Lockup

You get 2 choices with the Pro Hunter: a thumb hole or nothing. I opted for “nothing”, and the result is a 2 hand opener. It’s an easy knife to open with two hands. There is an expanse of blade flat to grab onto and a mild back spring, so it doesn’t need a nail nick. The thumb hole version is more practical, but this version works too. The two hand opening might make it legal in certain countries. The action is fluid, and there appear to be some washers inside the knife.

The Pro Hunter uses a lock back to lock the blade in place. The lock works well. The spring retention is strong enough to keep the knife from opening by gravity, but the blade opens with a satisfying clack. The lock up is rock solid. No blade play at all in any direction. Disengaging the lock is easy enough. Everything works as it should and feels good.

Here is a parting size comparison with a more traditional SAK. This is the new 93mm Alox Farmer X:

Blade centering is perfect. Rounding things out is a large slotted lanyard hole.

Victorinox Pro Hunter Alox Review – Final Thoughts

The Pro Hunter Alox doesn’t quite work for me. On one hand, it’s well made and functional. Victorinox has always made a nice knife, and this Pro Hunter is well made. The red aluminum handles are striking, the fit and finish is excellent, and everything works as advertised. The pocket clip and lock back are both well done.

The problem is the knife is way too heavy. Maybe if they ditched the liners, thinned the blade, and re-worked the steel backstrap you would have something that could cross-over between outdoor use and Urban EDC without pulling your pants off. As it stands the Pro Hunter strikes me as an oddity in my collection. Large and heavy, which makes it less practical. I hope it won’t stop Victorinox from attempting to innovate, but it doesn’t entirely feel like a step forward for the brand.

Victorinox Hunter Pro M Alox Folding Knife Red Aluminium Handle - Red

Compact and Sleek: The Hunter Pro Alox is the sleek and handy every day carry for the modern man
Versatile: Its iconic design and perfect form combined with the sturdy blade make it the ideal cross-over from the outdoors to the urban jungle
Durable: The standout feature is the hugely popular Alox scales, known and loved for their durability
Other Features: Add in the new smart clip, spring integrated lanyard hole and paracord pendant and you have hunting’s new generation go-to multi-tool
Finish: Aesthetically it’s a hit too; the subtle shimmering finish showcases the knife’s key parts with style

Editor: I recommend purchasing the Victorinox Pro Hunter Alox at BladeHQ or Amazon. Thank you for reading.

Spyderco Atlantic Salt Review

by Dan Jackson 3 Comments

This review is a series of firsts. After over 400 reviews, this is the first time we have reviewed a knife with a fully serrated blade. It’s also the first time we have reviewed a knife with H1, an uber stainless blade steel. At first glance, that may hold some significance. But really, this is a purpose built knife. The Spyderco Atlantic Salt is designed for marine use. This is a mariner’s knife.

Buy the Spyderco Atlantic Salt at BladeHQ

Buy on Amazon

Actually, according to Spyderco this is a rescue knife adapted for marine use. They took their Spyderco Rescue, and outfitted it with a high visibility handle and rust proof H1 steel. It’s a purpose built tool and probably not something most people are going to consider for their Every Day Carry (EDC) knife.

I have wanted to check out a knife in H1 for a while. According to Spyderco this is a completely rust proof steel. That’s different from a “stainless” steel, as even stainless steel can and will rust. Stainless steel will simply “stain less” than a non-stainless steel.

And as most steel enthusiasts know, blade steel is an exercise in compromise. Improving one quality of a knife’s blade steel, like hardness, often comes at the expense of something else, like toughness, ease of sharpening, or stain resistance. So what will be the compromise with H1? Will it cut like a butter knife and be impossible to sharpen? Let’s find out.

General Dimensions and Blade Details

The Atlantic Salt has an overall length of 8.25″, a 3.678″ blade, weighs 2.75 ounces, and is made in Japan. This is a pretty large folding knife, but it doesn’t feel overly big thanks to the unusual blade shape, high visibility handle, and ultra-light construction. EDC knives this big typically give off a tactical or “weapon” vibe, but this Atlantic Salt reads more like a tool and doesn’t strike me as being particularly threatening.

For these reasons I’ve actually carried the Atlantic Salt quite a bit. I don’t own a boat, and while I live in South Florida, I don’t get on to the water as much as I would like. So at the time of writing this review I can’t say I’ve used it as a mariner’s knife. But I have carried it and used it, and plan on keeping the knife for long term testing. It will join me on fishing trips and the occasional boat ride.

Here is the Atlantic Salt next to my Delica and Endura. As you can see, it’s only a little shorter than the Endura.

The blade is purpose built, and will take some getting used to if you are a fan of drop points. It’s a hollow ground wharncliffe with a fully serrated edge after all. Of course this was done for a reason. It’s a wharncliffe to reduce the risk of stabbing yourself on the pitching deck of a boat. It’s serrated to cut through line, and possibly clothing, and to take advantage of H1’s unique properties. It’s hollow ground because some believe H1 is “work hardened” rather than heat treated. What that means, is that as the blade is ground and the metal is removed blade steel hardens due to the force on the steel rather than a heat treat. This phenomenon is also referred to as “plastic deformation”. So they need to grind both sides simultaneously to avoid warping the blade, and they can do that with a hollow grind. Each aspect of the Atlantic Salt’s blade was done for a reason.

And lets turn to H1 itself. H1 is a high chromium austenic steel. The term “austenic” has to do with the crystal microstructure of the steel. I won’t get into a chemistry lesson, but if you want a deep dive on H1 I recommend this article by Knife Steel Nerds. You will learn all you want to know about H1 in that article.

The takeaway is that H1 is structurally different from the typical ferric stainless steels you find in most knife blades. It’s hallmarked by being completely stain proof, but the sacrifice is hardness. Bro science and anecdotal evidence suggest that a serrated blade best takes advantage of H1, and provides better edge retention. But modern metallurgy doesn’t explain why that would work scientifically. The Knife Steel Nerd even says that grinding a blade shouldn’t be enough to work harden it, and he’s the Knife Steel Nerd. So who’s to say?

All I can really do is test this stuff out, so that’s what I did. The knife came surprisingly sharp out of the box. It cut paper cleanly and easily. It tore through cardboard. I bought this knife on Black Friday, so it survived the holiday season with me. Lots of boxes lay broken in the wake of the Atlantic Salt. The serrated edge is surprisingly effective. I got a lot of work done with the knife before needing to sharpen it.

In fact, the knife was still tearing through things effectively, but I decided to pull out my Spyderco Golden Stone anyways to see what a sharpening session would do for the H1 blade. I used the rounded corner of the Golden Stone and zipped the serrated edges along the edge of the stone. Spyderco recommends sharpening both sides of a serrated blade, and that’s what I did here. The results were great. The knife got extremely sharp quickly. The Atlantic Salt slipped through cardboard as if it were butter. This is an easy knife to sharpen if you have a rounded stone for the serrated edge. I happened to use my mythical Golden Stone, but the Sharpmaker works beautifully for a knife like this.

Here is another size comparison. This time I have the Atlantic Salt next to my Para 2 and Tenacious:

The blade steel also exhibits excellent toughness. I didn’t test this in any particular manner, but noticed that the steel is so tough that it scratches easily. I noticed this immediately after cutting cardboard, and this YouTube video shows the wear on an H1 blade after 5 years. I think it’s interesting how the person who made that video compared the wear pattern on the H1 blade more to titanium than stainless steel. I would agree. My other blades don’t wear like this.

All said, I was surprised with the utility of the H1 blade. Now I know H1 to sharpens easily, keeps a decent edge, and has the benefit of being completely rust proof. The serrations may be important. I need to buy another knife with a plain edge in H1 to test it out.

Handle, Ergonomics, and Pocket Clips

In contrast to the unique and alien blade, the handle of the Atlantic Salt is familiar territory. Anyone who has handled a Spyderco Delica or Endura will immediately recognize the construction and materials of the Atlantic’s handle. That said, there are still plenty of things to note here.

First of all, the handle is a shock of bright yellow. That’s great for marine use and work knives in general. It’s possible you could drop this knife in shallow water and still locate it. Certainly it would stand out on the forest floor. The handle design is also completely devoid of metal liners. Instead, it’s 100% injection molded FRN (Fiberglass Reinforced Nylon). It still feels sturdy without the liners, but I wouldn’t consider the Atlantic Salt to be a hard use knife.

Continuing with the Mariner’s knife theme is the inclusion of a shackle key. That’s the elongated teardrop shaped hole in the handle. This is used to tighten screw pin shackles that you find mostly on sail boats. The Glessers were sailors, presumably before they settled in landlocked Colorado, so they are especially sensitive to the needs of a mariner.

It shouldn’t come as a big surprise that the Atlantic Salt is comfortable in hand. The handle is generous, easily accommodating large hands, and balances high traction with comfort. There is contouring all around the handle feeding into the heavily textured flats. There is good jimping on both the forward “50/50” finger choil (meaning 50% of the choil is handle, 50% is blade), and the severely angled thumb ramp. Your fingers are unlikely to slip forward towards the edge, even if your hands are wet. The balance point of the knife is right behind the pivot, lending the knife a slightly blade heavy feel unless you use the forward choil. All said the handle is well considered and exceedingly comfortable.

Even the pocket clip of the Atlantic salt is different. Here it’s a spring clip made of powder coated titanium. That’s another first for the blog. It sits high on the handle in a tip up configuration, and can swapped to the right or left side. The screw that holds the clip in place is slotted and drilled through so you can run a thin lanyard through it. It’s an elegant approach to the typical awkwardly placed lanyard hole, and one I wouldn’t mind seeing in other designs.

In pocket the Atlantic Salt carries pretty well. It’s a lightweight knife, so that’s nice. It’s also relatively thin; about the thickness of a Delica. Where the Atlantic Salt falls a little short, is that it’s a very wide knife. That’s due to the unusual design. I definitely feel this knife in the pocket. That’s not the end of the world, but worth noting. There is some bulk associated with the Atlantic Salt.

The clip is secure and has excellent retention. While the knife rides low in the pocket, that canary yellow handle is tough to ignore. Here is your in the pocket shot:

Deployment and Lockup

The blade is opened by the prominent thumb hole. It is oversized and easy to access. I tend to take that granted on a Spyderco, but what caught me by surprise was how smooth the action is on this knife. It’s buttery smooth. I can’t tell by peering down into the handle, but this may be a washerless design. I don’t know, but whatever is going on works, so I’m hesitant to take the knife apart. Once you overcome that initial spring tension the blade opens easily and locks with a satisfying click.

Speaking of locks, the Atlantic makes use of a lockback. It’s secure, and my knife is free of blade play in any direction, but this is not a knife I’d use for serious woodwork or other hard use tasks. Sure, it can cut into a board, but where the Atlantic salt truly excels is in sawing through fibrous materials and cardboard. But the linerless design doesn’t inspire confidence with truly tough tasks, and I’d be careful not to test the limits of the design. That said the lockback performs flawlessly. It is secure when open, and disengages easily with the push of a thumb.

Blade centering is perfect on my knife.

Spyderco Atlantic Salt Review – Final Thoughts

As a collector, I find the Atlantic Salt to be a quirky and charming knife. It’s different. That’s for sure. As a purpose built tool I think it’s a success. Granted I have yet to take this one on a boat, but I grew up on boats so I have some understanding of the application. And I live a quarter mile from the Gulf of Mexico so I’m around salt water regularly. The Atlantic Salt is well considered and a practical marine work knife.

What surprised me was how much I enjoyed the Atlantic Salt as an EDC. It kept finding it’s way back into my pocket. It’s wide, which is it’s biggest downfall in my book as a daily carry piece, but it’s lightweight and carryable. The H1 steel is actually a pretty decent blade steel. It’s nothing like M390 or a super steel in terms of edge retention, but I got a lot of work done with the serrated edge, and the knife sharpened quickly and easily. I was expecting a bigger compromise from a completely rust proof steel.

In the end, I’d buy another knife with a H1 blade. I’d like to try out a plain edge, just to get a better feel for how well the steel holds its edge.

For now, the Atlantic Salt will remain in my permanent collection. It’s unique, well considered, and fully functional. I’d recommend it if you need a rust proof knife, or are simply curious about it like I was.

Spyderco Atlantic Salt Lightweight Folding Utility Pocket Knife with 3.68" Corrosion Resistant H-1 Sheepfoot Blade and Durable Hi-Viz Yellow FRN Handle - SpyderEdge - C89SYL

Superior Quality: It is made from H1-Steel which is a precipitation-hardened steel containing nitrogen instead of carbon, which cannot rust.
FRN Handle: It is textured with a Volcano Grip pattern, the molded fiberglass reinforced nylon (FRN) handle is visible marine yellow, equipped with a reversible titanium pocket clip for right or left: handed use.
Game Changer: The serrated hollow-ground blade offers remarkable cutting performance in and around fresh and saltwater.
Corrosion Resistant: The knife is completely ambidextrous and utterly impervious to corrosion.
Specification: It has a overall length of 8.25", blade length of 3.6" and a weight of 2.75 oz. This knife is made from Japan.

Editor: I recommend buying the Spyderco Atlantic Salt at BladeHQ or Amazon. Thank you for reading.

Spyderco Centofante 3 Review

by Seth Vietti 1 Comment

The Centofante 3 is one of Spyderco’s most long-lived designs. Introduced in 2004 and unchanged to this day, it’s been around long enough to witness most of the rest of Spyderco’s lineup either evolve or go extinct. I think the reason why is simple: the Centofante still looks good.

Buy the Spyderco Centofante 3 at BladeHQ

Buy on Amazon

Even a diehard Spyderco fan will admit that the company’s design language can be… polarizing. The Centofante achieves broader appeal by standing apart from the typical Spyderco style: no bulging blade, no forward finger choil, no full-flat grind. It’s slim, simple, yet dramatic. If not for the round hole and the silver bug in the handle, it could easily pass as a knife from another brand.

I’ve long been tempted to pick one up for myself, but skepticism of its old-fashioned pinned construction always held me back. Until now. So, is the Spyderco Centofante 3 really as timeless as it looks?

General Dimensions & Blade Details

The blade on the Centofante is just shy of three and a quarter inches long. Thanks to a tiny ricasso and the absence of a finger choil, it has almost the same amount of usable edge as the significantly larger Paramilitary 2.

Despite all the edge, the blade still feels petite – no doubt due to its exceptionally thin blade stock. It’s the Centofante’s most noteworthy spec: at 1.95mm thick (according to my calipers), it’s easily the longest, thinnest folding blade in Spyderco’s entire catalog, if not the knife market at large. The only knives I own with thinner blades are either keychain-sized novelties or flexible kitchen knives. The Centofante makes the Delica’s blade stock look generous in comparison, and the Para 3’s, outrageous.

A hollow grind was definitely the right choice here. As much as I appreciate Spyderco’s full-flat grinds, they necessarily get quite thin towards the tip. The steady hollow grind on the Centofante has no such distal taper, preventing this sliver of a blade from being drawn too thin. There’s no flex, and the tip is narrow but not delicate. While I would never recommend prying with it, the blade seems better equipped for the task than, say, a full-flat ground Delica, since it’s supported by full thickness blade stock almost all the way to the tip.

My Centofante didn’t arrive as sticky sharp as I have come to expect from Seki City, Japan Spydercos. Thankfully, the neatly applied factory edge and sharpening choil made it easy enough to touch up. As you might expect with a knife this thin, it cuts quite well. It doesn’t have the shearing power of a broad, flat ground blade, but it’s much more agile – able to twist quickly mid-cut without much resistance. Whether it’s a drop point or a spearpoint, the blade shape just works: a stretch of flat edge, a gentle belly, and a focused tip.

The blade steel is VG-10, a time-tested alloy with excellent corrosion resistance and decent edge retention. While today’s best powder metallurgy concoctions outclass it in one way or another, I don’t really miss them here. The more knives I use, the more I appreciate well-balanced steels; especially ones that deliver good value like VG-10. Also, on a knife that can’t be taken apart for cleaning, VG-10’s stainlessness is a major asset.

Handle, Ergonomics, & Pocket Clip

At a glance, the handle of the Centofante looks like anodized aluminum. If it was cool to the touch, it would feel like it, too. It’s actually plastic (fiberglass reinforced nylon, to be specific) with a similarly smooth, light texture. The silver bug and “speed lines” molded into the handle seemed a bit odd at first, but they grew on me: they give an otherwise plain knife some personality without being ostentatious.

The Centofante is exceedingly comfortable in hand. The four and a half inch handle is lightweight, nimble, and well-sized for the blade. Its ergonomic features are subtle. No finger grooves or jutting guards, just gentle curves that suggest – not demand – how to hold it. I especially like how it bows down into the palm: it helps the skinny handle feel more substantial, and keeps the angle of the blade better aligned with the arm. If you’ve ever used a Spyderco Military, the Centofante will feel weirdly similar. Despite the size difference, the knives share the same sloping ergonomic geometry.

The pocket clip is highly functional, doubly so because the handles are smooth. It comes from the factory configured for tip-down carry. I’m no tip-up evangelist, but after carrying it tip-down for a few days it was obvious the factory got it wrong. The exposed tang, pointy thumb ramp, and aggressive jimping on the blade snag everything in their path. Front pocket, back pocket; didn’t matter – retrieving a tip-down Centofante from any pocket was awkward and unpleasant, as was reaching past it. Luckily, flipping the clip to tip-up instantly and entirely solved the problem.

The real snag with the Centofante – well, the one you can’t fix with a screwdriver – is the handle’s pinned construction. I understand why it’s a deal-breaker for some people, especially the tinkerers who like to modify their knives and those who need something 100% rust proof. Given the choice, I’d take threaded fasteners over pins myself.

Nevertheless, my experience with the Centofante was completely undiminished by the way it was put together. Honestly, I was fishing for a problem and still couldn’t find one. We knife nerds can get swept up in hypotheticals. What if the pivot comes loose? What happens if the knife gets filled with sand? In reality, most of the projected problems with pinned construction have simple solutions – just not the same ones as a knife held together with screws. The pivot came perfectly set from the factory, and, being incapable of twisting itself loose, it has stayed that way. When I got sharpening stone slurry all over the knife, I cleaned it with soap and hot water, followed by a squirt of penetrating oil. Basically, I used the Centofante with impunity and it’s only gotten better. So, why worry?

Deployment & Lockup

A back lock secures the Centofante open. Like many old-school back locks, there’s a touch of vertical flex in the lockup – not enough to hear or see, just enough to feel when bearing down into a cut. Spyderco’s newer back locks have stamped out this endemic blade play with tight manufacturing tolerances and refinements to lock geometry. It would be nice to see those improvements carried over to older designs like the Centofante, but since it doesn’t affect the lock’s strength or security, I didn’t let it bother me.

The blade has a springy self-close, and once broken in it was easy to thumb or spydie-flick open. There’s enough ricasso to allow for one-handed closing, so long as you’re mindful of where your fingers are on the handle.

Spyderco Centofante 3 Review – Final Thoughts

This is a chimera of a knife. It’s almost as if it was built to satisfy a bunch of contradictory design objectives all at the same time. A strong grind on a delicate blade. An upper class look for a middle class price. Traditional construction on a modern folder. Somehow, the Centofante manages to hit those opposing targets simultaneously instead of splitting the difference and missing them altogether – if the late Frank Centofante was a bowler instead of a knifemaker, the Spyderco Centofante would be a 7-10 split conversion.

Ironically, the contradictions that make the Centofante unappealing to knife enthusiasts are probably the exact reasons for the Centofante’s long-term success. It’s not a niche knife. It’s a classy, charming, low-maintenance workhorse of a blade that belies its price point. For me, that makes the Spyderco Centofante 3 the consummate gift knife: handsome enough to appeal to anyone, and uncomplicated enough to work for someone who’s never even heard of a “torx bit.” No instructions necessary, no setup required (well, maybe you should go ahead and flip the pocket clip before wrapping it up). Give one to someone who appreciates nice things but knows nothing about knives, or someone who appreciates knives but knows nothing about nice things.

Spyderco CENTOFANTE 3 Prestige Folding Utility Pocket Knife with 3.14" VG-10 Stainless Steel Hollow Ground Blade and Lightweight FRN Handle - PlainEdge - C66PBK3

One of a Kind: Designed in collaboration with Frank Centofante, longtime custom knifemaker and past President of the Knifemaker's Guild, the Centofante 3 captures the spirit of his custom designs.
Ultra-Lightweight: The Centofante 3 has a thin-profiled, lightweight FRN Handle. Two channels are furrowed out of the handle for better grip and a Palladium silver Spyderco bug is inlayed into its surface.
Easy-to-Use Lock: For added security and convenience the back-lock is positioned midway on the spine and David Boye Dent is cut from the locking lever.
Pocket-Friendly: To ensure discreet carry the Centrofante 3 has a black steel pocket clip positions for tip-up/down, right-hand carry.
Versatile: The VG-10 blade has both a hollow-grind and swedge-grind with non-sharpened spine serrations (jimping) to hold the thumb steady when cutting.

I recommend purchasing the Spyderco Centofante 3 at Amazon or BladeHQ. Thanks for checking out my review.

Viper Rhino Review

by Andrew Gene Leave a Comment

The Rhino is a large folder from Tecnocut’s Viper brand. Honoring its namesake, it features an oversized frame, robust build and armored appearance. Created by long time collaborator and custom knife maker Fabrizio Silvestrelli, it has flowing considered lines and a distinct appearance.

Buy the Viper Rhino at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Rhino has an over-all length of 9.96”, a 4.25″ blade, weighs between 8.6 and 9.9 oz depending on the choice of scales, and is made in Italy. Don’t kid yourself, “Rhino” was not a misnomer. This is a big knife and is designed for those seeking something, well, built like a Rhinoceros.

The blade has an unusual shape that sits in between a sheep’s foot and a harpoon pattern. At 4.25” and with a maximum width of 1.375” it offers a long cutting surface along with resistance against lateral stresses. The nature of the sloping spine also provides excellent tip strength.

While a typical sheep’s foot blade is designed to avoid penetrating cuts, the combination of an elongated radius meeting a sloping belly results in an aggressive point. This is augmented by a swedge, improving the Rhino’s ability to perform thrust cuts. A dip after the nose-like tip adds visual interest as well as a practical place for your free hand for reinforced push cuts. The grind is a full flat with a secondary bevel. Because of the large width, the edge geometry is shallow, producing a fine edge despite the generous .157” stock.

The steel used depends on the finish. Satin blades are stainless Böhler N690 while the charcoal blades are D2 achieving their corrosion resistance through the applied PVD coating.

Both blade steels are good options and provide solid value for money. N690 in particular offers an excellent combination of stain resistance, ease of sharpening, and edge retention. D2 has a reputation for being more finicky, as it’s a tough semi-stainless steel that can be more challenging to sharpen, but it’s a good choice for harder use applications.

Handle, Ergonomics, and Pocket Clip

The handle is substantial in both length and width. At 5.5” it will easily accommodate medium and large sized hands with or without gloves. The construction is closed with scaled, full stainless liners. You have your choice of carbon fiber or cocobolo handle scales.

Designed for maximum retention, there are three distinct finger grooves that lock your hand in place. A slight flare on both sides of the inside edge prevent slipping in either direction. The back side is convex and nests in the palm comfortably. The back spacer is rounded adding style and avoiding hot spots while an adequately jimped thumb ramp provides extra control and feedback. Another run of aggressive, file-like jimping can be found on the lock release leaver for easy disengagement.

Over-all the ergonomics are excellent. While several people don’t like finger groves I personally think they work well here. The grip is very secure. A full, natural feeling in hand is partly achieved by a palm swell equally .83” (21mm) at its apex. This could be somewhat of a downside when considering pocket carry as the knife tends to hog space. Even though the clip is deep riding, the ornate appearance along with the handles bulge might generate some unwanted attention. Is that a Rhino in your pocket….?

As an additional carry option there is a recessed lanyard slot in the pommel. I’m a fan of these as it keeps everything clean looking and orients your lanyard in a sensible direction. It would be nice if Viper also included a MOLLE compatible belt sheath. I could see a folder this size benefiting from the ability to carry it on a bag, vest or belt straight out of the box.

Deployment and Lockup

Deployment is achieved via ambidextrous thumb studs. Phosphor Bronze washers and a finely dialed in spring tension make opening very fluid and easy. The thumb studs are large and easy to access. One downside is that the pivot is not adjustable unless you remove the handle scales. That said, I have not needed to adjust the pivot on this knife.

Back locking knives aren’t often associated with smooth operation however Viper has, on a number of models, achieved a perfect balance between ease of use and a reliable, tough play free lock-up. The lock is easy to disengage when you are ready to close the knife. Blade centering is perfect on these knives.

Viper Rhino Review – Final Thoughts

Everything considered the Rhino is an unusual yet attractive knife. Unapologetically oversized, it will probably appeal to a very niche market of collectors and users. If massive appeals to you, it will surely impress in the over all fit, finish and value. With a maximum price of $200.00 for the the PVD D2 and Carbon fiber model, you are getting a ton of premium materials and craftsmanship for your money. I could easily see this knife in any collection, in the bag of an outdoorsman or on the vest of a serviceman.

7Regardless of its quirks it is undeniable that the Rhino is extremely well made and functional. It’s also great that Viper, as with many of their other models, offer the Rhino in a variety of handle and blade materials accommodating a variety of tastes. To further this, it might be good for the company to consider a scaled down version as an EDC for a wider audience.

Viper Rhino – From $175.00
From: BladeHQ

Viper Rhino PAU Wood

Crafted from the highest quality materials
Built for performance and durability
Made in Italy

Editor: I recommend purchasing the Viper Rhino at BladeHQ or Amazon. Thanks for reading.

Spyderco Native 5 Lightweight Review

by Dan Jackson 27 Comments

Last updated: January 24, 2019
The Native has been a staple in Spyderco’s catalog since 1997. Back when I first got into pocket knives it struck me as a potentially excellent knife. It has great specs on paper. Lightweight, high quality blade steel (at a time when that wasn’t a given), a good useful size to get things done, and a surprisingly affordable price point. This knife sold for close to $50. But the previous generation Native also had a saber grind, toothy jimping, and pinned construction. A number of flaws that kept me from giving the knife my full endorsement.

Buy the Spyderco Native at BladeHQ

Buy on Amazon

Of course Spyderco being Spyderco, they haven’t rested on their laurels. Their most classic designs get updated and tweaked over the years, and the Native was no exception. The Native 5 is their latest in the series. Introduced in 2012, this 5th generation in the series benefits from a number of upgrades. They have also rolled the Native pattern out in a number of variations, including the covetable carbon fiber version Aaron reviewed.

This plastic handled version, dubbed the “lightweight”, is their simplest Native. But I happen to think it may be their best version of the Native yet. Let’s dive in to see what this Native 5 Lightweight is all about.

General Dimensions and Blade Details

The Spyderco Native has an overall length of 6.875″, a 3″ blade, a weight of 2.45 ounces, and is made in the USA. I happen to think this is a great knife for suburban daily carry. It’s a full size knife, but at less than 2.5 ounces you hardly notice it in the pocket. While the Dragonfly II gets the job done, the Native 5 gives you more options.

Speaking of the Dragonfly II, here is a size comparison:

These days the Native comes in a fully flat ground leaf shaped blade. The old deep hollow grind and swedge has been updated with something a little more modern and clean looking. It’s the kind of simple and elegant blade shape that works well for everything from carving up a block of cheese to breaking down boxes to preparing wood shavings for a bonfire.

Spyderco has released this knife in many different blade steels over the years. Mine happens to come in S35VN, which I believe is a fairly common offering for the Native 5. They offer these in everything from S30V to exotic steels including S110V and even Maxamet.

I like the S35VN version of the knife, as S35VN is so easy to maintain. It takes a nice edge and is easy to sharpen, while also exhibiting decent toughness and corrosion resistance. No steel is perfect, but S35VN is pretty damn good by most metrics.

In practice my knife has done everything I’ve asked it to. It is an excellent slicer. It can thinly slice fruit, zip through cardboard, and handles heavier duty chores as well. I’ve been maintaining the edge on my Spyderco Sharpmaker, and the knife stays razor sharp that way. This is a great “do everything” blade that will handle all the stuff you would expect a good EDC knife to handle. I have carried and used this knife extensively. It just works.

Handle, Ergonomics and Pocket Clip

The handle of the native is comprised of two injection molded linerless Fiberglass Reinforced Nylon (FRN) handle pieces mated to a steel lock back and FRN backspacer. Everything is finished well and is secure. The old version of the Native had pinned construction, but this Native 5 comes with screw together construction. So you can take the knife apart if you would like to clean it. All said this handle is simple and utilitarian.

The handle of the Native 5 is big and boxy, providing you with a comfortable handle that fills the hand. There is a nice forward finger choil that is welcome on a good Spyderco. There is no lack of grip either. Between the bidirectional texturing, and the heavily jimped thumb ramp you are going to be hard pressed to find fault with the traction on this knife.

But personally I’ve never been that obsessive about traction. What I enjoy most about the ergonomics of the Native 5 is that none of the ergonomic features get in the way. Instead, everything has been applied with a deft hand. Subtly is the name of the game here, and the whole is the greater than the sum of its parts.

Once again, it’s kind of hard to explain what makes this handle so good, but at the end of the day it just works. This is a knife you will want to hold and use.

Lets turn to the pocket clip. This too has been worked over the years. What Spyderco has done is provided a secure spoon style clip with a unique 3 screw configuration. The base of the pocket clip straddles either the lanyard hole or the pivot, depending on whether you have the pocket clip placed for tip up or tip down carry. This is a “4 corners” clip, so you can configure the knife to carry tip up or down for left or right handed carry.

In practice this knife carries phenomenally. It’s a sub 2.5 ounce folder. You forget it’s there. While the pocket clip is not a deep carry clip, it’s still discreet, burying the majority of the handle. It also a secure clip with excellent spring retention. Not once has this knife fallen out of my pocket.

Lock and Deployment

For deployment we have the Spyderco thumb hole. No surprises there. What’s potentially surprising is this knife has no bearings or washers inside it. It’s all FRN. That would be a turn off for me, but honestly I didn’t know the knife didn’t have washers until I took it apart. It was smooth and I figured it had phosphor bronze washers or something in there. It doesn’t, but that’s OK because it doesn’t need them.

Here is a shot of the disassembled knife so you can see what I’m talking about:

The Native 5 comes with an adjustable pivot, a big upgrade over the old version of the knife that was pinned together. This is a bushing pivot. It works great, and the blade is perfectly centered.

Here is a size comparison with the Sage 1:

For lockup we have a lock back. It’s got a crisp snappy action that is satisfying to use. And there is no blade play in this knife. That is surprising when you consider it’s a plastic handle with no liners at all. Yet it’s a robust knife. Would I baton with it? No. Would I jab it into a tree and use it as a step ladder? No. But it has held up great after normal extended use.

Here is a parting shot with the Native 5 next to my Paramilitary 2:

Spyderco Native 5 Lightweight Review – Final Thoughts

The Native 5 is one of my favorite EDC knives. I even like it more than the Sage 1. Here’s why: it’s lighter than the Sage, has better pocket clip retention, I prefer the S35VN blade, and I think it’s a little more comfortable with the big plastic handles. The Native 5 has found it’s way into my permanent EDC rotation. It’s just an excellent knife and you don’t need to think very hard about carrying it. The blade is versatile and cuts well. The handle is comfortable. The pocket clip is great and the knife is so light you forget you are carrying it.

Spyderco offers this knife in a G-10 version with liners. Why you would pick that knife over this lightweight FRN version is beyond me. The G-10 version weighs over an ounce more. I’m sure it’s a great knife, but I don’t need to look any further than the FRN version. Maybe you have some harder use in mind for your pocket knife. But for most people I think they will find the Lightweight version to be plenty stout and rugged. This is a workhorse of a knife, and it’s great choice if you primarily use your knife to cut things.

The Native 5 Lightweight has my highest endorsement. This is an exceptional EDC knife. Buy it and enjoy it.

Spyderco Native 5 Lightweight Signature Knife with 2.95" CPM S30V Steel Blade and Black FRN Handle - PlainEdge - C41PBK5

An Improved Classic: The Native model has been a mainstay of Spyderco's product line for years as a result of it's Superior Quality and affordability. The state of the art Native 5 is available in an array of handle choices and colors.
USA Made: Spyderco takes tremendous pride in every knife we make, but the ones crafted in our Golden, Colorado factory are special because we invest a piece of ourselves in every USA-Made knife we create.
Light and Durable: This Native 5 handle is fabricated with Fiberglass Reinforced Nylon. FRN is a polymer mixed with glass fiber that is injection molded and formed into a sleek textured handle, creating a lightweight yet high-strength knife handle.
Dependable: If you are looking for control and precision, look no more. This knife features our PlainEdge grind which is known for creating a smooth and exact cut.
High-Strength Lock: The Back Lock mechanism is known for it's high-strength and ease of use. The locking system is positioned on the back of the handle.

If you are thinking of buying Spyderco Native, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.