integral

Benchmade Anthem 781 Review

Last Updated: July 18, 2019

There was a time when Benchmade was kinda the sleepy “Gunshop Knife Brand.” There would always be a few dusty Griptillians sitting in the case next to the preowned Glocks, and while the Grips might be fantastic value-props, they a bit vanilla-icecream-y if you get my meaning.

Buy the Benchmade Anthem at BladeHQ

Buy on Amazon

However, something has been changing in the last few years. I don’t know if someone put some sriracha on the break table over there in Oregon City, or what, but something has injected some pep into their design team. Introducing the Anthem 781, Benchmade’s first Integral Titanium folding knife. There are lots to say about this one, but before I get too deep let’s go over some specs:

(Please note these measurements are according to my ruler and calipers, manufacturer’s listed measurements may vary.)

Blade Length: 3.25” of cutting edge, 3.375
Overall Length: 8.125”
Thickness: .585” with clip, .421 handle only
Blade Thickness: .115”
Steel: 20CV
Weight: 3.7oz
Lock: The famed Axis Lock
Country of Origin: USA

Blade Details

With a knife like the Anthem, I believe that it’s intended to be a daily carry type piece. It’s not overly large, doesn’t have any sort of complicated aspect to it, and the functional bits are designed to be, well, functional.

The blade is a great example of this: drop pointed shaped with a rounded (or crowned) spine. Eyeballing it, I’d guess that it’s flat ground but I suppose it could be a shallow hollow grind as well; either way, it’s a great slicer. It came out of the box with a very nice, toothy, utility edge and I didn’t feel the need to change this on my wicked edge. In the couple of weeks that I’ve been carrying it I have had occasion to break down boxes, slice up food, and perform just daily “knife-stuff” tasks with it, nothing crazy, no batoning or zombie apocalypse type stuff, but in terms of daily EDC tasks, it excelled.

In terms of the steel, I will briefly comment on it: Benchmade chose 20CV for this blade, and I believe that to be an excellent choice for a knife like this. 20CV is a high toughness and corrosion resistance steel, that hardens to around 62HRC. I have no means testing to see if my knife is in that range, but I can tell you that it’s performed beautifully and has been easily maintained on a strop. 20CV is very similar to M390 (one of my favorite steels) and I have been really pleased with it in this application.

Handle, Ergonomics, and Pocket Clip

Ah yes… The INTEGRAL handle. This is really what makes this knife stand out, isn’t it? This is the first Integral from Benchmade. For those of you not familiar with the term: Integral means that the handle of this knife is milled out of a single block of Titanium as opposed to two that are screwed together. There aren’t any screws holding the knife handle together. In the past, this level of knife making was reserved to custom makers that had a lot of time on their hands (it takes a while to mill a channel out of a block of Ti) but recently a few companies have started incorporating integrals into their lineup.

One of the interesting things about Benchmade’s execution of the integral handle is how they incorporated the axis lock into it. When you look at the spine of the knife (the money shot of any integral) you’ll see two screws hidden in the decorative milling, these hold the locking method in place.

In the hand the first thing that came to mind for me was how thin the knife is; It carries very well in the pocket and feels great in hand. The handle itself is trim in both dimensions thickness and height, but there is a sort of faux-choil towards the blade that locks the hand in securely when holding the knife open. Otherwise, the milled texture gives you a little bit of grip on what would otherwise be a pretty slick knife.

The pocket clip is an ambidextrous milled Ti clip that is more than a little phallic, but it is also very functional. There are several makers out there that are offering custom clips made from Moku-Ti so if you want something different there are options for you. The knife carries well with approx 1/2” sticking out of the pocket, offering a perfect grip to withdraw it.

Deployment and Lockup

The blade on the Anthem opens by way of ambidextrous thumb studs. The blade deploys easily thanks in part to bearings washers. The action is smooth and easy.

For lockup, the Anthem comes equipped with Benchmade’s Axis lock. I’m not sure there’s much to say about the Axis lock that hasn’t already been said. It’s an incredibly solid lock mechanism that isn’t prone to lock rock, doesn’t really suffer from failures in the way a liner or frame lock might, and it is completely ambidextrous to use. The execution of the Axis lock is worth noting on the Anthem, there’s a block screwed to the spine of the knife that acts as the anchor point for the axis lock mechanism.

Benchmade Anthem Review – Final Thoughts

So to wrap all this up…the Benchmade 781 Anthem is a great step forward for Benchmade knives. I think it shows a focus shift on Benchmade’s part too, hopefully, starting to produce some higher-end knives. I am also very pleased to see their adoption of some different steels. I love CPM154 and S30V, but it’s good to have some variety. Between the 20CV here and the S90 in the 940-1, it’s been refreshing.

Now, the caveat to this entire review: This is an expensive knife. MSRP is around $500, with retail landing closer to $425 on BladeHQ and Amazon. Competitively, this puts you in the ballpark of a Chris Reeve, or above the ballpark of some really nice Zero Tolerances, but what you’re paying for here is the time and difficulty in making the handle. It’s a remarkable feat, but you have to decide if it’s worth it to you, for me it was too cool to pass up. The nice thing, however, is that you won’t be getting a gimmicky integral for that price—you’re going to be putting a knife that will make a great daily carry in your pocket.

Sale

COLD STEEL AD-10 3.5" S35VN Steel Ultra-Sharp Drop Point Blade 5.25" G-10 Handle Tactical Folding Knife with Tri-Ad Locking Mechanism

CONSTRUCTION - The AD-10 tactical folding knife features an ultra-wide, ground thin at the edge, honed to razor-sharpness blade that offers unprecedented cutting, shearing, and piercing power while resisting bending, breaking, or chipping
S35VN STEEL BLADE - Crafted from S35VN steel, the AD-10 folding knife's blade ensures super-fine cutting edges and exceptional edge retention; This premium steel is renowned for its durability and ability to maintain sharpness through rigorous use
STRONG HANDLE - The handle of the AD-10 knife boasts heat-treated, full-length aluminum liners and 3D machined G-10 scales, providing unparalleled strength and grip; Its precise contouring and integral finger guard ensure a snug and secure fit in the hand
TRI-AD LOCK - Complete with the Tri-Ad, the AD-10 offers unrivaled strength, shock resistance, and durability; This reliable locking mechanism provides peace of mind, safeguarding your fingers during use and ensuring the blade remains securely in place
SPECS - Weight: 7 oz (198.4 g); Blade Thickness: 3.8 mm; Blade Length: 3 1/2"; Blade Steel: S35VN; Handle Length/Material: 5 1/4" G-10; Overall Length: 8 3/4"; Knife Type: Folder; Blade Shape: Drop Point; Locking Mechanism: Tri-Ad Lock

I recommend purchasing the Benchmade Anthem at BladeHQ or Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Rike Thor4s Review

by Grayson Parker Leave a Comment

Rike doesn’t enjoy the same name recognition that Reate, Kizer, or WE Knives does. While those companies are easily recognizable as the leading names in the renaissance of Chinese knife manufacturing, Rike is often left out of the conversation. On one hand, that’s perfectly understandable: unlike Kizer, WE, or Reate, Rike hasn’t cultivated much cachet with trendy designers, relying instead on in-house designs. At the same time, they have the same reputation for quality as the others, and an aesthetic all their own besides.

Buy the Rike Thor4s at BladeHQ

To be perfectly honest, I never thought that Rike would produce a knife that’d suit my tastes. Most of their offerings have blades nearly four inches long, which is utterly out of bounds for my line of work. When I saw the specs for the Thor4s, I nearly spit out my coffee. A reasonably sized integral? From Rike, no less? I was intrigued, and luckily, my girlfriend noticed and passed that information along to my family.

It should be noted that this was a Christmas present from my folks, and if ever there was a cause for bias, it’s the knowledge that your family might read every criticism you level at an earnestly given gift. I don’t think this has affected my judgment, but all the same, it’s something you should know.

General Dimensions and Blade Details

The Rike Thor4s is among the smallest knives in my collection, with a blade length of 2.375”, a handle length of 3.125”, an overall length of 5.5”, and a weight of 2.08 oz. To be perfectly honest, I was caught off guard by just how small this knife is; to give you a sense a scale, the box is so small I mistook it for jewelry. The blade is short enough that it’s less than ideal on a picnic, but it’s more than long enough for standard office chores. It also bears mentioning that with a blade length less than 2.5”, it’s unlikely to spook any coworkers.

Despite Rike’s fascination with angles, they chose a simple drop point for the blade’s profile. Were it not for a few issues I’ll bring up momentarily, this would be the utilitarian ideal. Most of the spine’s thickness is brought to the tip, so there’s little concern of snapping the tip off, whether in a fall or a bit of prying. The belly is just wide enough to feed, say, the edge of an envelope into, but not so wide that it’ll slip out of a cardboard box you’re breaking down.

The grind on the Thor4s is immaculate. All the details are perfectly executed: the plunge lines are crisp, the swedge is even, and both the primary grind and cutting bevel are consistent and well finished. Unfortunately, the blade stock is thick enough that all that work at a grinder is functionally irrelevant. It cuts fine, don’t get me wrong, but it’s no slicer. That would normally be a deal breaker, but as mentioned above, it’s too short for most food prep anyway.

This is the first knife I’ve reviewed that has M390 steel, and truth be told I haven’t really put it through its paces. A knife this size is meant for intermittent office use, not breaking down a pallet of boxes. It’s held its edge without chipping or rolling, hasn’t rusted, and responds reasonably well to a loaded leather strop. The high satin polish has a remarkable rainbow sheen that undoubtedly helps with rust resistance.

Handle, Ergonomics, and Carry

Of course, the prime selling point of the Rike Thor4s is its integral handle. For the uninitiated, that means that the handle is milled from a single block of material, which in this case is titanium. It’s an expensive process with few (if any) practical upsides, and most of an integral’s appeal lies in its status as a feat of engineering. Rike’s design language carries this theme to its logical endpoint, as the over-machined aesthetic pushes the Thor4s into “pocketable sculpture” territory.

Overall, the ergonomics of the Thor4s are fine, with the exception of two distinct flaws. The first of those is the butt of the handle, which, as you can see, tapers down to a wide, flaired end that leaves a rather sharp point on either side of the handle. In turn, this generates a slight hotspot when the knife is opened, though not when it’s held normally during use. The second issue is the pocket clip. For what I can only guess are aesthetic reasons, the tip of the clip isn’t rounded, or even squared: instead, it ends in an angular point. Most of the time this isn’t a problem, but every so often it catches on the meat of my palm in an altogether unpleasant way.

Normally knives with questionable ergonomics are also unpleasant to carry, but such isn’t the case here. It’s lightweight, compact, and its ergonomic flaws are only noticeable in the hand. As much as I want to rail against milled pocket clips in general, the spring tension on the Thor4s is quite nice, neither fraying the lip of my pocket nor acting like a hook instead of a clip.

Deployment and Lock Up

The blade is deployed by a well-executed flipper. It’s definitely of the ‘pull’ variety: trying to push on the tab will only leave you with a bruised finger. Instead of washers, the pivot runs on caged bearings, which is to be expected at this price point. The detent is crisp, the action is smooth, and as far as deployment is concerned, there’s not a fault to be found.

Once deployed, the blade is held open by a titanium frame lock that features a stainless steel lock insert. There is no horizontal or vertical blade play, and the lock consistently engages around 30% of the blade tang. The decorative pivot collar also functions as an overtravel stop. This is exactly the list of features I want in an integral frame lock. By contrast, when I was working on the DPx Aculus review, I was always aware that if something happened to the lock, I’d be up a certain creek without a paddle.

Rike Thor 4 Review – Final Thoughts

Overall, the Thor4s is an intriguing – if imperfect – addition to the market. The blade stock is a bit chunky, and the ergonomics a bit pokey, but at heart the Thor4s is an office knife, and as such those two flaws are tolerable. Between the top notch manufacturing, high end materials, and the novelty of a sub-3” integral, there’s more than enough to redeem the design.

It’s difficult to find comparisons to the Thor4s. There are plenty of production integrals, but few at this price point, and none at this size. The Lionsteel SR-22 (when it debuts) will be the next smallest integral that I’m aware of, but even then it will be substantially larger than the Thor4s. If you’re in the market for reasonably sized integral, this is likely your only option.

Next up: the Steel Will Modus.

Editor: I recommend purchasing the Rike Thor4s at BladeHQ or Amazon.com. Thanks for reading!

LionSteel TM1 Review

by Dan Jackson 12 Comments

Last Updated: August 3, 2019
I hope the regular readers are interested in high end knives, because the next few posts are all going to be doozies. The TM-1 is so mythical a knife, that it isn’t even out yet, although LionSteel tells me that they will be introducing it to market any day now. I was fortunate enough to snag one of the pre-release samples on display at the 2014 Blade Show.

Buy the LionSteel TM1 at BladeHQ

Buy on Amazon

As a lover of knives, I had an extremely tough time putting down the TM-1 LionSteel had on display at their booth. As a lover of deals, I couldn’t resist asking whether they would be willing to part ways with one for purposes of review. Gianni, co-owner and CEO of LionSteel, was kind enough to oblige me. That said, I do need to make clear that this knife was one of the 4 or 5 display pieces sitting at the Blade Show booth, and it has been handled by hundreds of people over that weekend. As such it has a few scuffs and carry marks, and I of course have been carrying and using it myself as well.

The TM1 is another knife in LionSteel’s SOLID® line, which means that the handle has been milled out of a single block of material. In the past titanium has been LionSteel’s handle material of choice, and I examined my titanium-handled SR-1 not too long ago. This time around LionSteel has decided to use either carbon fiber or micarta. Being the material girl that I am, I of course opted for carbon fiber. The carbon fiber is handsome and makes the knife much lighter than my SR-1 (which is about the same size).

Perhaps even more interesting than the material selection is the fact that this time around LionSteel wanted to make a monolithic handled knife with a back lock and IKBS bearings; two firsts for the company. I have been admiring the knife for almost a month now and I am still unsure as to how exactly they pulled that off. Regardless of what draws you to the TM1, there is something to admire. And I feel very fortunate to share some early thoughts on this brand new knife.

General Dimensions and Blade Details

The TM1 has an overall length of 8.07″, has a 3.54″ blade, and weighs 4.48 ounces. Much like when handling the Zero Tolerance 0454, another carbon fiber handled knife, one of my first remarks when picking up the TM1 was how light it felt. The knife feels deceptively light for its size, and is way lighter than a titanium handled counterpart. This is a largish EDC knife in my book. Not only is it a pretty long knife, it is thick and wide as well. That said, the TM1 was definitely built with use in mind. Construction is stout, the handle and blade are capable, and the light weight means that it is actually something that can be carried.

The TM1 has a unique reverse tanto blade. Reverse tantos are uncommon. Arguably the best known production knife to feature the reverse tanto blade shape is the Benchmade 940, which happens to be one of my favorite Benchmades. So the blade profile of the TM1 is different from most of the knives in my collection, and is a welcome divergence from all of my drop points. The reverse tanto not only looks unique, but it is quite practical too. You get all of the belly of a drop point with the fine tip of a tanto. LionSteel further enhanced the usability of this knife but giving it a full flat grind, which gets nice and thin behind the edge. This isn’t just a show piece, this is a practical tool.

LionSteel elected to equip the TM1 with a Sleipner stainless steel blade. This is my first real experience with Sliepner, and it has been fun to put this knife through its paces. I am not particularly interested in the chemistry of the steel, but here is a link to the data sheet so you can check all of that information out.

In practice I found Sliepner to perform well for daily carry tasks. Like I mentioned in the intro, this was something of a scratch and dent model, so I had no problem with beating on this knife a little (the first scratch is always the hardest). I worked with cardboard, wood, paper, and plastic, and the knife never had a problem. When the edge did start to slow down it quickly came back after stropping. My final thoughts on Sliepner are still in the works, but so far this steel seems very promising. No issues with rust or corrosion either.

My knife did come with a black blade coating. I am pretty sure it is a black oxide blade coating, and it has held up really well under use. Granted I haven’t use this knife to open up a can of Chef Boyardee, but so far there is no scratching or visible signs of wear.

Handle, Ergonomics, and Pocket Clip

Obviously handle construction the reason to buy this knife. Milled from a solid block of micarta or carbon fiber (shown here) handle construction is impressive, to say the least. Every corner has been masterfully chamfered (in some cases it has been so decoratively), and the handle is contoured for comfort and style. The end result is beautiful and displays the carbon fiber weave in a number of different facets. The workmanship is flawless; all the lines are crisp and clean. My satisfaction with the execution of the carbon fiber handle cannot be overstated.

The TM1 feels at home in my hand. It’s a stout knife, with plenty of handle and an abrupt finger choil. The body of the handle gently swells to fill the palm, and the absence of jimping is not a problem for me. Despite the apparent lack of a dedicated “traction plan” the knife magically manages to remain in my grasp. This is a comfortable and fully functional handle.

The TM1 features an ambidextrous deep carry pocket clip. This is the same clip found on the SR-1. Mine has been given the same black oxide coating as the blade (so far no wear), and is held in place with a carbide glass breaker. SR-1 owners will attest that this is a very nice pocket clip. It is discrete and holds the knife very securely in your pocket. The fact that it is mounted on the butt of the handle is very elegant. There are no extra holes in the handle of the knife and I love the simplicity and practicality of this clip design.

For a larger and bulkier knife the TM1 does carry well, in part because it has a well implemented and secure pocket clip, and in part because it is so lightweight for its size. This is definitely a knife that can be carried.

Deployment and Lockup

The TM1 makes use of a thumb disk to open the blade. This is probably my least favorite aspect of the knife. It works fine for slow and purposeful openings, but I have found it impossible to flick open. I guess at the end of the day that is perfectly acceptable, but this is a knife I would love to flick open given the IKBS bearing system and the massively satisfying “thwack” sound the knife makes upon deployment. It makes almost a chirping noise, kind of like the Sage 1, which also happens to feature carbon fiber. My guess is that they opted for the thumb disk so that they wouldn’t spoil the lines, and I suppose that is a worthy compromise.

My knife locks up without even a hint of bladeplay. Again, the sound this knife makes upon locking up is very unique, and very satisfying. Upon disengagement of the lock bar the blade falls about halfway closed, where it can then be shaken completely shut. I have never handled a lockback that smooth before. No doubt this is due in part to the use of an IKBS bearing system, and LionSteel definitely deserves some kudos for this. The large decorative pivot is very smooth, and the action is a lot of fun. I still have no idea how they got all of those bearings into this thing.

It is worth noting that my blade is perfectly centered.

LionSteel TM1 Review – Final Thoughts

The TM1 is the third addition to their integral line, and I think it is my favorite. I say that because in my opinion this knife is meant to be used; a vibe I don’t really get from my TiSpine or my SR1. LionSteel has managed to elevate the humble back lock to a drool worthy, collector status knife yet they have also kept it durable and functional. The lightweight handle makes this a knife that I actually want to pocket and use, while the TiSpine and SR-1 are knives that I want to enjoy while sitting on my couch. Plus, titanium scratches easily, and this carbon fiber really hides wear well. Same with the black oxide coated blade.

I think LionSteel is really doing some exciting things. While other manufacturers seem to be caught in something of a creative rut, LionSteel’s creativity and willingness to push the envelope further elevates themselves as serious contenders in the US production knife marketplace. And I don’t think I am the only one to notice this. LionSteel won the 2014 Blade Show manufacturer of the year award, and their HiJinx collaboration with CRKT and Ken Onion netted them a 2014 knife of the year award as well. As I look towards their next move, I can’t help but wonder if we will see some of this technology filter down into some budget minded products. I doubt we will see a 4-axis machined carbon fiber handled knife retail for under $200.00, but if there is one thing I have learned about LionSteel, it is to expect the unexpected.

Given the premium price tag, this knife won’t wind up in everyone’s collection, but I definitely recommend it if the TM1 is one that you want to buy. This is an amazing knife and I am very impressed by it.

Lionsteel TM1 – From $400.00
From: BladeHQ

Lionsteel TM1 Micarta, Knife TM1 MB

MADE IN ITALY by LionSteel, one of the world's premier knife manufacturers
KNIFE HANDLE is precision machined from a solid block of Micarta for extra sturdiness and strength
BLADE is made from Sleipner steel, a chromium/molybdenum/vanadium alloy which is a variant of D2 steel
INCLUDES tungsten carbide glass breaker and an ambidextrous pocket clip
DIMENSIONS: Blade Length 3.54", Blade Thickness: 0.18", Total Weight: 3.5 oz.

I recommend purchasing the SR-1 at BladeHQ or Amazon./i>

Lionsteel SR-1 Review

by Dan Jackson 14 Comments

Last Updated: July 28, 2019
A topic knife nuts love to ponder is the age old question of “is it worth it?” This question is probably as old as knife ownership is itself. I imagine that first cave man who showed off his fancy new blade hewn from obsidian rather than the typical rock was met with his fair share of detractors (I am not sure if they used the term “haters” back in 6000 BCE). Whether an expensive knife is “worth it” in comparison to its cheaper counterparts continues to amuse us to this day, and a great example of a knife that gets the brunt of that question is the Chris Reeve Sebenza.

Buy the Lionsteel SR-1 at BladeHQ

No products found.

It doesn’t take long into seeking out info on the Sebenza before you stumble across a forum post, YouTube video, or even the comments section of your favorite knife review website to see folks passionately argue the merits of Sebenza and its $400.00 price tag. Opinions run the gamut from the Sebenza not being worth $100, let alone $400, to being the holy grail of blades and easily justified at any cost. I don’t agree with either of those extremes, but I think there is plenty of room in the middle to make valid arguments for and against the “value” of the knife, so I try my best to stay out of it. (If you absolutely must know, personally, I own and enjoy several CRKs and have concluded that they are worth it to me to have in my collection. Part of how I justify the cost is that if some day I woke up and didn’t like the knife, I could sell it and recover 90% of my money. Anyhow, I digress…). My point with all of this is that a lot of people seem obsessed with value and getting more for their money. Especially when it comes to high end production knives.

Enter the Lionsteel SR-1. I’ve drooled over this knife ever since it made it’s debut in 2010 with its dramatic blade shape, imposing sculpted handle, and top shelf materials. I felt like this was a knife truly befitting of a king and the fact that a company called Lionsteel was making it made perfect sense. But what really did it for me was the fact that this is an “integral”. By that I mean the handle has been carved from a single chunk of glorious 6A14V titanium. Here we have a knife that has truly done something different from a construction perspective. There should be no doubt in anyone’s mind that certainly we are getting *something* more for our money with the SR-1. So with that out of the way I intend to explore the merits of this blade…

General Dimensions and Blade Details

The SR-1 has an overall length of 8.3″, has a 3.7″ blade, and weighs 6.8 ounces. This is a sizable knife. Definitely larger than my average EDC, and is not something I am really prepared to carry on any kind of a regular basis. I consider it a collectable more than anything, but it certainly has been made for carry and use, and I am sure plenty of people do carry theirs regularly. Lionsteel has recently offered a mini version of the SR-1, the SR-2, and that may be a better bet for my style of EDC. That said, there is nothing wrong with buying this knife purely for collectable purposes – especially if you opt for the sweet version with a damascus steel blade like I have. What you are looking at is the SR-1 in Chad Nichols raindrop damascus. I’m not a huge damascus guy, but I thought this one was pretty cool.

The blade shape on this knife is a typical drop point. What I always liked about this knife was the ridiculously wide blade and the deep belly. Not for any practical reasons, mostly because it looks impressive and is unlike anything else in my collection. Blade stock is generous at .18″/ 4.5mm thick. The spine is capped (rounded over) while the high flat grind terminates in a durable, but plenty capable, edge. This isn’t a particularly awesome slicer, but it will hold up under harder use and can certainly cut stuff.

Like I mentioned before, this particular knife comes in Chad Nichols damascus, but if you were to buy a regular one off the shelf it will likely come in either D2 (for the aluminum handled version) or Sleipner steel (for the titanium handled version). Sleipner is manufactured by Bohler Uddeholm and from the limited research I did it is supposed to share some similarities to D2, in that it is a tough tool steel, semi-stainless, and capable of being heat treated to a high hardness, but it is supposed to be more resistant to chipping. Bohler put together a handy data sheet for those looking for more technical information on the steel. Because I haven’t personally used it, I have no real comments on it at this time.

Handle, Ergonomics, and Pocket Clip

The handle of the SR-1 is what really steals the show. 3-D machined from a single block of titanium or aluminum (the SR-1A), this handle is as beautiful as it is technically impressive. A monolithic handle like this is commonly referred to as an “integral” these days, but there is nothing common about this handle. I’ve examined my fair share of high end knives, including custom pieces, but holy shit is this thing is cool. And the fit and finish on this handle is really nice too. The exterior has been given an attractive grooved pattern, while inside the handle has been cleanly excavated to accommodate the blade. Adding to the interest, Lionsteel offers the SR-1 anodized in a rainbow of different colors. Simply put, this handle is spectacular.

Adding to my love of the SR-1’s handle is how nice and comfy it is. Lionsteel did an excellent job softening all of the edges and the SR-1 just melts in place. Next to the actual handle construction, I was most impressed by how good this handle felt. It’s a large knife so there is plenty of room, and the chamfering they have done is just superb.

The pocket clips is another well-implemented and elegant feature of the knife. I have to hand it to the Italian’s, they really now how to design beautiful stuff (and I’m not just saying that because my last name ends in a vowel). The clip is a deep carry design mounted on the pommel. It is reversible with a single screw. In practice the SR-1 carries discretely and decently for its size. I like the look of the deep carry clip, and the fact that this design does not put a lot of unnecessary holes in the beautiful titanium frame.

Deployment and Lockup

The SR-1 takes advantage of a pair of ambidextrous thumb studs for deployment. They are mounted for easy access with the thumb, and the blade rides on teflon washers. I’m not a huge fan of teflon washers because they don’t deploy particularly fast, but they are still found in some high end knives and I guess I’ll just have to learn to deal with that. Deployment isn’t particularly fast and I was unable to ever flick the blade open with my thumb, but it’s smooth and purposeful, which is pretty much what I’ve grown to expect with teflon washers.

On the other hand, lockup on the SR-1 is nothing short of glorious. You have a thick titanium lock bar with a steel insert, and when the blade opens up the lock bar falls into place with a really satisfying snap. Engagement is early and extremely secure. The fact that the handle is cut from a single piece of titanium makes for a very rigid frame, and I didn’t even notice a suggestion of blade play. I will say that my blade is ever so slightly off center, and I was not able to tune that out with the supplied pivot tool. This is a slight let down, but I guess there are some limitations with the integral design.

I also need to briefly note the rotoblock (which is the big round thing in the middle of the lock bar cut out). Much like the DPx Hest 2.0 I reviewed a couple years ago, the SR-1 comes with Lionsteel’s rotoblock, which doubles as lockbar stabilizer (preventing you from over-extending the lock bar when disengaging it) and as a secondary locking mechanism. The way it works is that you torque it down to lock the knife open or closed. A common criticism with the rotoblock is that it can come loose and put you in a position where the knife accidentally gets locked open or closed. The rotoblock on my SR-1 is very stiff, so maybe Lionsteel has completely addressed that issue. Personally, I see the secondary locking mechanism as a novelty at best, and a nuisance at worst, but I do like having some sort of lock bar stabilizer.

One final aspect of the knife worth mentioning is the packaging. Each SR-1 comes nestled in its own wood display case. It’s a cool feature and I have yet to see a knife come packaged like this. I know the box is the least important thing about a knife, but when you are already paying $400.00, it’s cool to see that Lionsteel went the extra mile to do something besides your typical cardboard crate.

Lionsteel SR-1 Review – Final Thoughts

The SR-1 is a hell of a knife. I know it’s expensive, and that is part of the reason why it took me so long to acquire one, but it’s different, and generally very well done. And I guess if you really cared about the price you could go for the less expensive aluminum handled version, the SR-1A, which sells for less than $200.00. I ran into a couple minor issues (slow action with the teflon washers, a slightly off center blade), but by and large this is a masterpiece and a tremendous accomplishment for a production knife. In this day in age it’s easy to argue that a lot of high end production knives aren’t worth the premium in price because they aren’t much different from their cheaper counterparts, but here the SR-1 really does deliver something different. The mono-block handle is just super duper cool and everything else has been really well done.

It isn’t the most practical knife in my collection, but if you have the dough and the desire, I definitely recommend checking it out. Because I favor smaller sleeker knives for daily use I definitely see myself acquiring a TiSpine in the not so distant future. Hopefully it doesn’t take 4 years for me to pull the trigger on that one.

Lionsteel SR-1 – From $379.00
From: BladeHQ

No products found.

I recommend purchasing the SR-1 at BladeHQ or Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.