USA Made EDC Knives

Benchmade Griptilian 551 Review

Last Updated: November 30, 2019
The Benchmade Griptilian is a household name in the knife world. It is one of Benchmade’s most popular designs and it appears in countless variations.

Buy the Benchmade Griptilian at BladeHQ

No products found.

For many, this will be their first “real knife”. A gateway blade into the world of high end pocket knives. It was one of my first nice pocket knives, so it holds a special spot in my heart. What’s interesting, is that I still have and use this knife almost a decade later. I originally wrote this review back in 2011, so this is a very long term hands-on review of the Benchmade Griptilian.

General Dimensions and Blade Details

The full size Griptilian has an overall length of 8″, a 3.45″ blade, weighs 3.25 ounces, and is made in the USA. This isn’t a small knife, but Benchmade has managed to keep the weight down. By way of comparison, the Mini Griptilian has a a 2.9″ blade, an overall length of 6.78″ and a weight of 2.56 ounces.

If you are at all like me, you may be on the fence about whether to get this full size Griptilian or the Mini Grip. I actually purchased a Mini-Grip first, but I ended up swapping it out for a full size because I wanted something with a full size handle. I know a lot of people who prefer the Mini-Grip for an EDC knife. It’s all a matter of preference.

Depending on whether you are looking at the thumb hole version or the thumb stud version the knife will have either a sheepsfoot blade with a thumb hole or a drop point blade. Both blade shapes come in 154CM stainless steel and both blade types will have a long hollow ground edge with plenty of belly. The drop point edge is very attractive to me, so that is what I ended up purchasing. It has a swedge that finishes in a fairly stout tip – good for piercing tasks. The knife was extremely sharp out of the box. All in all this is a very nice blade which is great for EDC chores.

The standard Grip comes with a blade made of 154CM stainless steel. 154CM is a highly regarded stainless steel manufactured by Crucible Industries in the USA. While fancier (more expensive) steels have come on the market in recent years, I still appreciate 154CM because it takes a nice edge and is easy to sharpen. I actually prefer 154CM over S30V in many applications because 154cm is so easy to sharpen, while S30V can be stubborn to sharpen. 154CM is a proven steel and is a good fit for a working man’s knife like the Griptilian.

Handle, Ergonomics, and Pocket Clip

The handle of the Griptilian is made of Valox, which is an injection molded high density resin. It’s plastic. I know some people don’t care for the Valox handle because it has a lightweight and the plasticy feel. Personally, I think it is a practical choice for the handle as the material is both lightweight and tough, but I understand how fans of more substantial knives could be turned off by the product.

After years of people complaining, Benchmade finally issued a G-10 version of the Griptilian and Mini Grip in late 2015. I still like the original plastic handled version, but the G-10 version is beautiful and definitely an upgrade. Check out my review of the G-10 Griptilian here.

This handle has a closed back design, which means it is a little more difficult to clean than a knife with pillar construction. The handle is held together with screws and everything is nicely finished. Benchmade makes a ton of these knives and they seem to have their manufacturing and quality control protocols dialed in.

As far as ergonomics are concerned, the handle is chunky and covered with texturing. I would expect no less from a knife called the “Griptilian”. There is a run of jimping on the spine of the blade, and little jimping in the plastic placed strategically around the handle. The knife feels good in the hand and there is no lack of traction. I have used my Griptilian for years now and it continues to be a solid performer.

The Griptilian comes with Benchmade’s standard steel pocket clip. The clip is a classic no-nonsense design that has stood the test of time and can be found all over Benchmade’s lineup. The handle is drilled and tapped for ambidextrous tip up carry. All in all this is one of my favorite clips. It has great retention, buries deep and looks normal. The only potential issue is that the black finish will quickly began to wear like mine has. That is not an issue for me, and if you send the knife in for sharpening, Benchmade will include a new clip.

How does the Griptilian carry? While the Griptilian is lightweight for its size, this is a thick knife. At over half an inch thick you will likely notice it in the pocket. All said, it carries well. The standard clip is not a deep carry pocket clip, but it buries most of the knife into your pocket. Here is a pocket shot:

Deployment and Lock

Whether you opt for the version with thumb studs or the thumb hole, the Griptilian deploys with alarming speed. Seriously, this is one of the fastest deploying and smoothest opening knives I own and it’s one of my favorite features of the knife. I’ve taken mine apart for cleaning a couple times, and Benchmade has installed some of the biggest phosphor bronze washers that I have ever seen on a folding knife. No doubt this is part of the reason why deployment is so smooth.

The Griptilian uses Benchmade’s axis lock which I have written about quite a bit in the past. It’s an excellent lock and it really works well with the Griptilian. There is a lot of weight in the blade which makes it easy to really flip the knife out fast and it makes for a solid lockup. Also, the axis lock gives you a variety of ways to open and close the knife. I find myself playing around with the deployment of this knife a lot. It’s a durable locking system that allows the knife to easily be open and closed with one hand.

Benchmade Griptilian 551 vs. Benchmade 551-1 G10 Griptilian

As I mentioned in the handle section, Benchmade released the 551-1 G10 Griptilian in 2015. This was after years of people complaining about the plastic handles of the original 551. I have both the G10 and regular version, and wrote an in-depth review of the G-10 Griptilian.

Here is a picture of the original Griptilian, the 551-1, and a Doug Ritter Griptilian with Wilkins GRIP aftermarket G-10 handles:

The G-10 version is awesome, but it’s also about $100 more than the regular version. Naturally, people want to know if the G10 version is “worth it”. I can’t really answer that, because everyone is different and value is relative. Some people will see the value in the G-10 version, some people wont, and some people won’t even see the value in the regular FRN Griptilian.

I will say that the 551-1 is immaculate. Benchmade did an absolutely beautiful job with the knife, and I can easily see where the extra money went. They didn’t just slap on some G10 handles, they considered every aspect of the original Griptilian and tweaked it when building the 551-1. It’s a wonderful knife. If you have the money and interest, then my suggestion is to spring for the G-10 version. With that said, the original 551 is still as serviceable as it ever was, and remains one of my all time favorite pocket knives.

Benchmade Griptilian vs. Mini Griptilian

Ok, so you have decided that you want some sort of Griptilian. Often the hardest part is choosing between a full size and a mini. I recorded a comparison video for you to help make the decision a little easier:

At the end of the day, both the full size and Mini Grip are excellent knives. I can easily justify having both in my collection. With that said, if you have to pick one, then my blanket advice would be to buy the mini-grip if you plan on carrying it in a suburban environment (ie, if you plan to use it at work, and you work in an office). The full size Griptilian is a good size knife, and some will consider it threatening if you use it in public.

Here is a size comparison with the Mini Grip:

If you can get away with carrying a bigger knife and like bigger knives, then go for the full size Griptilian.

A Few More Comparisons…

Since the Griptilian is such an iconic knife, people can’t help but compare it to other knives. I’ve used it as a reference piece in a number of articles.

One obvious comparison is with the Spyderco Paramilitary 2. I actually wrote an entire article comparing the Para 2 with the Griptilian. Since I went into such detail in that article, I won’t re-hash it here, but it’s worth checking out if you want to compare the 2 knives.

Another interesting comparison is with the Benchmade Bugout:

I like the comparison because in many ways the Griptilian was the original lightweight folding knife, and the Bugout can almost be considered a refinement. The Bugout came out at least a decade after the Griptilian, and it benefits from a lot of refinements. It’s thinner, lighter, with blue anodized standoffs and a super thin blade.

The Bugout is a more expensive knife, but I really like it. I think it’s worth the extra money. Of course, there is room in my collection for both knives.

Benchmade Griptilian Review – Final Thoughts

The Benchmade Griptilian has a well deserved reputation of being both an outstanding pocket knife, and a modern classic. Benchmade started with a timeless and functional design, and built the knife to be lightweight, fast, and functional. The thickness of the handle and choice of plastic for the handle material will be turn offs for some, but personally I like how the the knife feels in hand, and have no problems with the choice of handle material. And these days we have the G-10 551-1, so if you don’t like the black plastic, go for the G-10.

My Griptilian has seen years of use, and it still finds a lot of time in my pocket. This is my highest form of endorsement. I have owned my Griptilian since 2011, and I still have it in my regular rotation. This is after reviewing hundreds of pocket knives. Over that course of time I have bought and sold dozens and dozens of knives. I still have my Griptilian and I still use it. That alone should tell you something.

I recommend the Griptilian if you are in need of a larger EDC knife or utility knife. If you are looking for a smaller knife, then check out the Mini Grip. Both are great. If you want something higher end, then go for the 551-1, or the 556-1. At this point there is something for everyone in the Griptilian lineup. You can’t go wrong with the Griptilian.

No products found.

I recommend purchasing the Griptilian from Amazon or BladeHQ. Buying anything through any of the links on this helps support the website at absolutely no cost to you. Any and all support is greatly appreciated. Thank you very much.

Kershaw Leek Review

by Dan Jackson 20 Comments

Last Updated: December 1, 2019
The Kershaw Leek is a popular EDC knife designed by legendary custom knife maker Ken Onion. Between his designs for Zero Tolerance Knives, Kershaw, and CRKT, Ken’s work has received a lot of attention on this site. This is for good reason as he is highly regarded as a knife designer.

Buy the Kershaw Leek at BladeHQ

Buy on Amazon

The Kershaw Leek is firmly planted in the Every Day Carry (EDC) category. In fact, this is something of a gold standard for EDC. It comes in a great size and is a durable design, perfect for daily carry. Additionally, the Leek has been offered in wide variety of colors and finishes, including some limited edition versions over the years. This makes the Leek a collectable knife. For these reasons the Leek has become a favorite of both hardcore enthusiasts and casual pocketknife users.

General Dimensions and Blade Details

The Leek has an overall length of 7″, a 3″ blade, weighs 3 about ounces, and is made in America. Like the vegetable it was named after, this is a sleek and slim design. This lightweight folder is aimed directly at the Every Day Carry (EDC) market.

Here is a size comparison with the Leek in between my Kershaw Skyline and Kershaw Chive:

The Kershaw Leek features a modified wharncliffe style blade. The Leek’s mostly flat edge is almost completely devoid of belly. This makes the knife well suited for tasks that involve the tip of the blade. The Leek’s blade comes to a very fine tip and it makes the knife great for piercing tasks and detail work. Stuff like scoring boxes and clipping coupons is a breeze with a wharncliffe. It’s also easy to sharpen a wharncliffe blade like this relative to a knife with a curved edge. Another advantage of the wharncliffe design is that pressure is applied uniformly to the edge. This allows you to place a good amount of leverage into a cut.

On the flip side, folks may not like the wharncliffe blade because it has no “belly” or forward curvature to the blade. Belly is especially useful when preparing food (think, rocking a kitchen knife back and forth) or skinning game without piercing the hide. And that tip, while very precises, is somewhat fragile. You don’t want to drop any knife, or pry with any knife, but the tip of the Leek is especially delicate.

Another argument against the wharncliffe is that it looks funny. It lacks the traditional elegance of something like the Loveless Drop Point Hunter. This wharncliffe blade may take some getting used to if you come from a traditional hunting knife background, but that’s part of what folks find endearing about Ken Onion’s work.

Here is another size comparison with the Spyderco Endura and the Delica 4:

The Leek is a perennial in Kershaw’s catalog. The design is at least 10 years old, and probably is closer to 20. Accordingly, Kershaw has offered the knife in a number of steels over the years. But if you are going to buy one new one today, it will most likely come in 14C28N.

14C28N is developed by Sandvik, a Swedish company that made the steel exclusively for KAI USA/Kershaw Knives. 14C28N is a high quality stainless steel and is a choice for the price. I have found that 14C28N is a practical steel. It takes a fine edge easily, holds that edge for a decent amount of work, and is easy to sharpen. It also has good stain resistance. I prefer it over 8Cr13MoV and Aus8, the Asian budget steels, as it holds an edge longer. I also like it more than D2, a semi-stainless steel that can be found at similar price point as 14C28N, because 14C28N is easier to sharpen and isn’t as prone to staining.

It’s an excellent all round steel, and is appropriate at this price point.

Handle, Ergonomics, and Pocket Clip

The handle of the Leek will come in either full stainless steel with a frame lock (shown here) or aluminum scales with a liner lock. Both models feel good in the hand for a smaller knife. The solid steel handled version has a nice heft to it. Both handle types are constructed with screws rather than pins, so if you need to disassemble the knife, then it can easily done with a T6 torx bit.

Fit and finish on this handle is excellent. All the parts line up. The finish work is good with no tooling marks or anything like that. It’s simple design, but Kershaw has it dialed in.

This is a comfortable little knife that is geared towards light to medium use. I found I was able to get a 4 finger grip on the knife without much issue and my thumb found the thumb ramp easily. There is a little bit of jimping on the thumb ramp. The jimping isn’t supper aggressive, but it does grab the skin a little. Otherwise, there isn’t much of a “traction plan” on this knife, so you won’t want to skin a deer with it or take it into the shower, but for a small knife I liked the ergos.

The pocket clip of the Kershaw Leek is pretty good. Ken Onion is known for designing some pretty “out there” pocket clips, but the clip on the Leek is relatively normal looking. It is long, and offers good spring retention. It is reversible for tip up or tip down carry, but it is not ambidextrous.

The clip rides pretty low if you mount it tip down, but for tip up carry a good half inch of the handle sticks out. That said, this is a small and light knife, it still carries well and is unlikely to draw much attention. Here is a shot of the Leek in the pocket:

Deployment and Lockup

The Leek is an assisted opening knife, which means you start opening it manually, but then a spring kicks in to flip the blade open the rest of the way. Ken Onion designed the assisted opening system, which Kershaw calls the “SpeedSafe” deployment system. This assisted open technology is robust, and is used on a lot of Kershaw and Zero Tolerance knives. The Leek deploys quickly with a slight amount of pressure on the thumb studs or flipper. The knife opens with a satisfying “snap”, even after thousands of flips. Having owned a number of SpeedSafe knives over the years I can vouch for it’s reliability. It’s a good assisted opening mechanism.

There is a second optional safety lock to keep the knife from opening accidentally. Out of the box, this secondary safety is loose, and will invariably move around when you don’t want it to. Thankfully, this safety can be tightened down, or even removed completely if you decide not to use it.

Additionally, for those that don’t care for the SpeedSafe, it’s possible take the spring out and use this as a non-assisted opening knife. There is a ball bearing detent inside on the lockbar, so the knife still functions de-assisted. But primarily the Leek was designed as an assisted opening knife.

The blade on my knife locks open with a stainless steel frame lock. The lock is solid, and without blade play in any direction. It should be more than adequate for the typical EDC chores you will put this knife up to, like breaking down boxes and opening mail. My Leek has seen substantial use over the years, and the lock still engages early, and securely without blade play. When it’s time to release the lock there is no stick.

The Leek was designed to be a “1 hand” knife, which means you can open and close this knife with one hand. I’m left handed and found it easy to both open and close this knife with one hand. For a small EDC knife this is handy, and it’s almost a requirement for my EDC knives.

Here is a parting size comparison with another EDC classic, the Benchmade Mini Griptilian:

Kershaw Leek Review – Final Thoughts

The Kershaw Leek has most of what I look for in a small EDC knife. It’s light, slim, sharp, and fast. I like the solid lockup and quality blade steel. The pocket clip is secure, and the knife feels good in the hand. The fact that this Kershaw is made in the USA certainly does not hurt either. I think the quality is better on Kershaw’s USA made knives than their imported blades.

The biggest potential issues with the Leek are that there is not much texture on the handle, and the tip is thin and can break if you are not careful with the knife. It’s a little “fiddly” and is more of a light duty knife. It will accomplish most typical urban or suburban EDC chores, but if you have harder use in mind I’d look elsewhere. Also, the secondary lock is annoying unless you tighten it down or remove it.

However, for a little EDC blade I think these are minor issues. You just have to keep your intended use in mind. The sleek design makes this something of a gentleman’s folder, and I could see this knife doing just as well in an office as it would in a more demanding environment.

Perhaps the greatest test is the test of time. I originally wrote this review back in 2011. Back then, there were a lot less knife manufacturers and knives to choose from. As I update this review in late 2019, the Leek is still relevant. Kershaw still makes it, and it still sells well. My review sample has held up well over the years. It’s a high quality knife and is designed to last. And at well under $50, the Leek is an affordable USA made option. I’d say it has aged well and passes with flying colors.

Personally, I prefer the Kershaw Skyline over the Leek, but if you like the design then I think you will be pleased with the build quality and practicality of the Leek. Much like the Skyline, this is a modern classic for good reason. Recommended.

Kershaw Leek Pocket Knife, 3" 14C28N Stainless Steel Drop Point Blade, Spring Assisted Knife, Folding EDC

KERSHAW LEEK POCKET KNIFE: The Kershaw Leek might just be your new favorite EDC. Not too big, not too small, the 3-inch blade and slim design make it capable of fulfilling a wide range of cutting tasks. Made in the USA.
DROP POINT PLAIN EDGE BLADE: Made from high-performance Sandvik 14C28N stainless steel, the blade resharpens easily and holds its edge. The bead-blasted finish provides a clean, matte look.
410 STAINLESS STEEL HANDLE: The corrosion-resistant, stainless-steel handle is contoured for a comfortable grip while in use. Silver, bead-blasted finish. Includes reversible pocketclip for right, tip-up/down carry.
DESIGNED WITH SAFETY IN MIND: Equipped with Kershaw’s SpeedSafe assisted opening for easy one-handed release with flipper. Frame lock secures blade open while in use and Tip-lock slider keeps blade locked closed when folded.
SIZE SPECIFICATIONS: Blade Length: 3in. Closed Length: 4in. Overall Length: 7in. Weighing in at 3oz. Backed by Kershaw’s Limited Lifetime Warranty.

I recommend purchasing the Kershaw Leek at Amazon.com or BladeHQ.Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

ESEE Izula II Review

by Dan Jackson 10 Comments

Last Updated: September 22, 2018

The ESEE Izula is one of the most iconic small fixed blade knives of our time. Named after an infamous South American Ant, the Izula was designed to be a small, sharp, and incredibly tough blade for outdoor and everyday use. In practice, the knife is just that. The simple design and solid build catapulted the Izula into fixed blade fame in very short order. More recently ESEE released the Izula II, a version of the knife with a slightly longer handle. Having larger hands I went with the Izula II, but 95% of this review applies just as well to the original Izula.

Buy the ESEE Izula II at BladeHQ

Buy on Amazon

As for the intended use (and my overall perspective of this knife for purposes of the review) I have carried my Izula II extensively as both a suburban EDC and as an outdoor knife. The Izula is a great size for the pocket and is something I have no issue pairing with a larger fixed blade, a folder, or just carrying it by itself.

General Dimensions and Blade Specifics

The main differences between the Izula and Izula II are the handle length, weight, the color selection, and the fact that the Izula II comes standard with micarta handle scales while the scales are optional with the original Izula. The handle of the Izula II is exactly half an inch longer than the Izula, giving the knives a total length of 6.75″ and 6.25″ respectively. Both have a blade length of 2.75″. The Izula II has a weight of 3.2 ounces and the Izula has a weight of 2.0 ounces. Both knives are made in the USA.

Both knives are forged from a single piece of 1095 High Carbon steel (the same steel used in all ESEE knives). 1095 is a very tough tool steel that is great for outdoor and survival knives because it is very tough (less likely to chip or break), sharpens easily, and takes a very nice edge. The biggest disadvantage to 1095 is that it is not a stainless steel and will rust if you aren’t careful. In order to help combat rust ESEE coats the knives in a textured powder coat. 1095 is a proven steel that I have written at length about, and Rowen (the manufacturer for ESEE) knows how to heat treat this steel (to 57 HRC).

The Izula and Izula II share the same drop point blade shape. This is a great shape for all around utility, with plenty of belly, a stout tip, and a full flat grind. What impresses me the most is how thick the blade is at .156″ (~4mm). The thick steel holds up well to batoning, tip torture tests, and everything else I could throw at it. “Indestructible” is a word that readily comes to mind when I ponder the Izula II’s blade. Of course the thick geometry means that this won’t be your best slicer – it’s no chef’s knife for sure. But the Izula does a good job cutting and will make quick work of most EDC tasks, camp chores, basic food prep, and carving.

Handle and Ergonomics

The regular Izula comes “naked” without any kind of handle material. The skeletonized 1095 is perfect for wrapping paracord around it, or you may opt for the canvas micarta handle scales ESEE sells separately (they can be had for around $15). The scales beef up the knife a bit and it provides a great feel to the knife. Even without any kind of handle scales the Izula is a reasonably comfortable knife. A paracord wrap is an attractive and inexpensive option that will add additional comfort to the handle and also allow you to carry a couple extra feet of cord on you with the knife.

The Izula II comes with canvas micarta scales that feel good and wear well. They are attached to the handle with two sets of allen bolts – making them fully removable. Having used the knife hard in the outdoors I do wish the bolts were flathead bolts. That would make them much easier to service with something like a multi-tool, coin, or even the spine of another knife. That is probably my biggest complaint with the Izula II, and I generally feel they did a great job with this handle. The micarta is lightly textured, and it provides a good comfortable grip in wet or dry conditions. One thing about canvas micarta is that it will soak up sweat, oils and moisture and it will darken over time. I happen to think this looks cool and adds a little character to the knife.

As for overall ergonomics, you will want the Izula II if you have larger hands. I take a large glove and the Izula II fits me perfectly. In my opinion anything less would feel cramped. I also really like having micarta scales on this knife, it fills the hand well and makes for an extremely comfortable tool. Both knives have a nice spot for your index finger and functional jimping on the thumb ramp. It gives you good control over the knife and feels very natural. If you are the kind of person with smaller hands, in need of a neck knife, or want to take a crack at making your own handle scales then the original Izula might be a better choice.

Sheath

Both knives come with black injection molded plastic sheathes. These are lightweight sheathes made of a dense polymer that is very durable. Blade retention with these sheathes is excellent – the knife locks into the sheath with a very satisfying audible “snap.” The fit is nice and tight (no rattle), but it is not impossible to pop the knife out with your thumb. This is about perfect in my book because the knife is secure but it is also easy to get at when you need it.

The sheath on the Izula (and Izula II) allows for multiple mounting options. The sheath has 2 smaller eyelets for paracord, a slot for belts or webbing, and a large eyelet near the tip of the sheath for a lanyard. My favorite way to carry this knife is in my pocket. I’ll sometimes loop a largish (18″ or so) lanyard through the large eyelet of the sheath and secure the other end to my belt. It makes retrieval of the knife easier and you don’t have to worry about misplacing your sheath.

All in all I am extremely pleased with the versatile and durable sheath that comes with the Izula / Izula II. This is easily one of my favorite small fixed blade sheaths.

ESEE Izula II Review – Final Thoughts

The Izula II is a great little knife. The simple design and sturdy construction make for a very versatile tool that works just as well around the house as it does out on the trail. If you need a small no-nonsense utility knife then I would say to look no further. The sheath is excellent, the handle is comfortable, and the 4mm blade stock holds up to even the toughest tasks.

The Izula goes for around $55 for the knife and the sheath ($16 more for handle scales) while the Izula II can be had for around $65. I’d say these are fair prices. Remember that these knives are made in America and that ESEE has a no questions asked lifetime warranty so if anything happens to the knife (besides rust) ESEE will replace it. Some will argue these knives are expensive. I think in this case you get what you pay for.

Finally, if I could go back in time and pick between the Izula and Izula II again I would stick with my Izula II. I like the standard micarta handle scales, and greatly appreciate the slightly larger handle of the Izula II. That said, if you are looking to make your own handle scales, have smaller hands, or want to keep the weight down then the regular Izula is probably your best option.

Sale

ESEE Knives Izula-II Fixed Blade Knife, Micarta Handle, Molded Sheath, Clip Plate (Black)

Overall Length: 6.75″
Blade Length: 2.63″
Steel: 1095 High Carbon, 55-57 Rc.
Weight: 3.2 Oz. w/o Sheath
Molded Sheath & Clip Plate

I recommend purchasing the Izula II at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade Nimravus 140BK Review

by Dan Jackson Leave a Comment

Last Updated: July 26, 2019

The Benchmade Nimravus is one of Benchmade’s original fixed blade designs. It has stood the test of time and remains popular to this day. A “Nimravus” is an ancient cat with large teeth. I’d say that’s fitting when you consider this blade’s profile.

Buy the Benchmade Nimravus at BladeHQ

Buy on Amazon

Benchmade has offered the Nimravus in a number of blade steels and colors over the years. Today I’m checking out a 154CM version that has been blacked out completely.

General Dimensions and Blade Characteristics

The Nimravus has a blade length of 4.5″, a total length of 9.45″, weighs 6.2 ounces, and is made in America. This is a lightweight tactical fixed blade. Generally, a tactical fixed blade is going to be primarily used as a utility knife, but it needs to be able to serve in a defensive role as well. The Nimravus has the ability to flex into both of those roles. The 4.5″ blade gives you plenty of options. This knife will get plenty of work done, but can also be used as a martial blade if necessary.

The Nimravus comes both tanto and drop point versions, and you can get it with a plain edge or partially serrated. I opted for the drop point with partial serrations. Partial serrations can be handy for cutting rope and other fibrous materials, and it doesn’t dull as quickly as a plain edge, which can be helpful for use in the field when you may not have ready access to a knife sharpener.

My drop point blade has been given a high flat grind. The blade gets thin behind the edge, and this knife can assist with food prep, baton smaller pieces of wood, and take care of the myriad of small tasks that crop up in the out-of-doors. There is a partial swedge, that is mostly for decoration. The tip is fine and must be used carefully.

My blade has been coated in BK1, Benchmade’s proprietary poly-ceramic coating. BK1 is tough stuff, but it does show wear. Personally, I’m not a big fan of blade coatings, and would prefer to see Benchmade offer this knife in a stonewashed or satin finish. Especially since this knife is offered in stainless steel.

Speaking of stainless steel, my Nimravus came in 154CM. 154CM is the same workhorse steel that Benchmade uses on their Griptilian. It’s an excellent all-round steel, exhibiting good edge retention, corrosion resistance, and easy sharpening. This is a proven steel that is a good choice for this smaller fixed blade knife.

Handle and Ergonomics

The Nimravus is a full tang knife that has two hard-anodized aluminum handle scales. Handle construction is simple and neat. The scales are fastened to the handle with large torx hardware. Everything has been meticulously finished. The edges of the handle are chamferred and sit slightly proud of the aluminum scales. The scales themselves are deeply textured for traction.

This is a very grippy knife. The handle scales provide excellent grip, there is a large finger choil to keep the knife securely in hand, and there is a row of toothy jimping. I find the jimping too toothy without gloves. It digs into the pad of your thumb, and can be uncomfortable. Thankfully, the aluminum handles have been milled so you can hold the knife in a pinch grip. I find that to be more comfortable.

The balance point of the knife is right behind the finger choil. It gives the knife a neutral feel and hand and helps the Nimravus feel fast and balanced.

Rounding things out is a metal pommel with a hole for a lanyard. While it isn’t designed to be a glass breaker per se, this pommel could be used to break some glass or as an impact device.

Sheath

The Nimravus a sturdy nylon sheath with a kydex insert. The sheath offers several methods of attachment and you can remove various straps and connections to modify the knife as you like, however, I much prefer the optional kydex (hard plastic) sheath.

As far as nylon sheathes go this one is top notch, but the durability of the kydex sheath is hard to beat. Keep in mind that it’s a $40 option, which may seem pricey but I assure you that it is money well spent if you are going to seriously carry this knife. In a perfect world I’d like to see this come with the knife.

A final thing to note about the nylon sheath is that it comes MOLLE compatible. For those that use MOLLE (a system of attaching gear to yourself and your equipment) this is a nice feature that you don’t find with a lot of sheathes and it is worth taking a moment to mention.

Benchmade Nimravus Review – Final Thoughts

The Nimravus is a lightweight and capable knife that could fit the role of a large EDC or tactical blade. One thing that I may not have communicated through the review is the quality and level of fit and finish. This knife is well built. The blade is thinly ground, the balance is good, and the finish is everything you would expect from Benchmade. This is a durable blade and a convenient size to get real work done.

Here is the Nimravus next to my Ka-Bar BK-16, a more inexpensive tactical fixed blade:

It is lightweight enough to be a backup blade, but it’s got enough length on it that you could use it as a primary field knife or tactical option. For those seeking a piece of Benchmade history, or simply a good fixed blade knife, the Nimravus is well worth considering.

No products found.

If you would like to buy a Benchmade Nimravus, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 14210 Heckler and Koch Snody Review

by Dan Jackson 1 Comment

Last Updated: November 29, 2019
For those looking for a rock solid edc knife with a sub 3″ blade, the Benchmade 14210 may be just the ticket. This knife is part of Benchmade’s Heckler and Koch (HK) line, which is a partnership between the two companies where the knives are made by Benchmade and branded with HK insignia.

Buy on Amazon

A number of interesting designs have emerged from this line, all with a no-nonsense tactical feel. The HK 14210 is no different although this time Benchmade teamed up with custom knife maker Mike Snody to give us a really unique looking blade.

Purpose

For purposes of this review I am mainly examining the 14210 from an EDC knife standpoint. With a blade just under 3″ this knife could work well in areas requiring a smaller knife that doesn’t compromise strength and performance. I think the 14210 could function as an emergency tactical knife as well due to its stout design.

General Dimensions and Blade Characteristics

The 14210 has a blade length of 2.95″, an overall length of 6.80″ and a weight of 3.08 ounces. 3 ounces for an EDC knife is very reasonable, and the 14210 has a pleasant “heft” to it in hand. For those interested in, say, a Benchmade Griptilian but are looking for something a little more unique and exclusive this knife might fit the bill. The 14210 uses the same 154CM stainless steel as the Griptilian. As I have mentioned in other reviews, 153CM is a very good high end blade steel known for it’s all-around performance and good corrosion resistance.

Where the Snody 14210 departs from the Griptilian is with its very unique blade shape. This is a modified drop point blade, defined by a long swedge, a slight recurve and a hollow grind. The recurve makes the smaller sized blade cut like a bigger knife and I was pleased with how razor sharp this knife came out of the box. I also liked the grey finish on this knife; it wears well and looks good.

Handle, Ergonomics, and Pocket Clip

This handle benefits from a simple design. It has an open back with pilars. It also has sculpted G10 handle scales over 420J stainless steel liners. The liners have been milled out and help keep the weight of this stout blade manageable. This is a very simple handle design but it feels very strong.

The ergonomics on the 14210 are very nice for a smaller blade. The G10 scales are sculpted and a pattern of lightly textured lines run down the length of the blade. This texturing could be improved to provide a better grip, but I think it’s fine for most EDC tasks. There is a nice thickness to the handle and the edges of have been smoothed for a more comfortable grip. There is a large thumb ramp on the top of the blade with very aggressive jimping. That thumb ramp works really well with the shallow choil, providing excellent control over the knife. While this isn’t the most innovative handle shape I have seen, it certainly does the job here.

The pocket clip is a simple, unbranded Benchmade clip finished in a flat black. This is the “arrow” clip common on a lot of Benchmade’s knives. The clip allows for ambidextrous tip up carry and is retained with 3 sturdy screws. The retention is good and the clip is mounted high so that the blade rides low and unobtrusively in your pocket. All in all I am very pleased with this clip.

Lock and Deployment

The HK 14210 has Benchmade’s patented axis lock technology. The Axis lock is wonderful and it works flawlessly here. My deployment was a little stiff out of the box, but after breaking the lock in a bit it has really improved the deployment. The blade is fairly thick and heavy so it really builds some momentum and flings the blade out. I really feel that with a knife like this, you really don’t need an assisted or automatic knife. One handed opening is fast and easy, and it’s just as easy to close this knife one handed as well. The fast deployment and the axis lock are major features of the knife.

Benchmade 14210 Review – Final Thoughts

The 14210 is a great folding EDC knife with a sub 3″ blade. 154CM steel, a rock solid handle, smooth deployment and solid axis lock all make this a great knife to consider carrying. The size and weight are other pluses that make this a great EDC option. I find the axis lock and full liners to make this knife extremely durable. The overall quality and attention to detail created an extremely loyal following for the Benchmade HK 14210.

Benchmade 14210 Heckler & Koch Snody Design Axis 3.4in. Plain Edge Blade Tactical Folding Knife

Lengths: Blade - 2.95in., Overall - 6.8in., Closed - 3.85in.
Blade Material: 154CM. Plain Edge. Handle Material: Aluminum
Lock: patented AXIS locking mechanism. Black G10 Handle Scales.
Modified Drop-Point with Recurve and Dual Thumb-Studs.
Double 410 Stainless Steel Liners. Weight: 3.08 oz.

Editor: I recommend buying the Benchmade 14210 at Amazon. Thank you for reading.

Kershaw Skyline Review

by Dan Jackson 11 Comments

Last Updated: March 19, 2019

The Skyline is often regarded as a reference point. A knife we compare other knives to. It’s also a damn good Every Day Carry (EDC) knife. Back when I originally reviewed the Skyline in 2010, it was among the first reviews to be published on the site. It was a great knife then. Today, it is just as relevant and excellent of a knife.

Buy the Kershaw Skyline at BladeHQ

Buy on Amazon

This is an in-house design from Kershaw, meaning it wasn’t designed by a popular custom knife maker, and I doubt that when they originally created the knife they expected to have such a run away success on their hands. The Kershaw Skyline is an American-made, high-value, lightweight, EDC knife with all the features you would expect from a modern folding knife that is widely available and accessible at almost any budget.

General Dimensions and Blade Steel

The Skyline has an overall length of 7.375″, a 3.125″ long blade, weighs 2.3 ounces, and is made in the USA. In addition to being long and light, the knife is slim, measuring an inch across when closed and 3/8″ wide. The Skyline is ideal for EDC.

The Skyline sports a long spearpoint blade shape with a plain edge and a hollow saber grind. This is a very practical blade shape that is good for piercing and slicing. It is surprising how much blade you get considering the weight. The full size blade and handle lend a lot of versatility to a little 2.3 ounce knife.

The blade, liner, and pocket clip are all made of Sandvik 14C28N stainless steel. This is a hearty Swedish steel that holds an edge well and is easy to sharpen. My Skyline came sharp out of the box and is easy to maintain. The blade and the clip has a beadblasted finish. This isn’t my favorite finish, because it is more susceptible to rust than a stonewash or satin finish, but it works here (especially at the price).

Given the tremendous popularity of the Skyline, Kershaw has released this knife in a number of different handle colors and blade steels (including carbon fiber covers, a damascus blade, etc). So the knife can also have a collectible element to it if you want to go that route.

Handle, Ergonomics, and Pocket Clip

The handle of this knife is made of lightly textured G10. The G10 is lightweight, feels nice and provides decent grip. The liner lock has received some jimping which works well however the spine of the knife has no jimping at all, which means your thumb has no real grip on the top of the knife when in use. This can be a problem, especially if you were to do some stabbing or thrust type cuts or were working with something like slimy foods, and is one of my few complaints with this knife.

The Skyline has a a pocket clip that allows for tip up or tip down carry. I found the clip to be very tight and I had to bend it with a plastic spatula before I got the desired pocket retention – an easy adjustment. One problem I do have with the clip is that it is not ambidextrous. Being left handed, this is something of a concern, and I would prefer if they drilled and tapped the handles for 4 way carry. They may have opted not to do that because there is only 1 liner.

The pocket clip rides fairly low in the pocket, there is about an inch of knife sticking up when the clip is mounted for tip up carry. I would prefer a lower riding clip, but the knife is still pretty discrete.

Deployment and Lock

The Skyline uses a flipper to open the blade. This was back before flippers were cool. Consequently, it does not have the dialed in, rocket the blade out action that we have come to expect on modern flippers. You need to pre-load the flipper tab or use your wrist to ensure fast opening, but it certainly gets the job done. There are thumb studs, but they are primarily blade stops. You can use the thumb stud if you are right handed to roll the blade open, but the flipper is the preferred way of opening the knife. Inside there are phosphor bronze washers, a feature typically found on higher end knives – especially when this knife originally came out.

The Skyline uses a liner lock to lock the blade open. This knife has only one steel liner (on the side of the lock) which greatly reduces the weight and thickness of the knife. I think this was a wise decision by Kershaw although some might prefer a beefier knife. In that case, I would simply suggest buying a bigger knife. The lock itself performs admirably. I like liner locks in general and this knife has a good one. Blade centering on my knife is perfect.

Here is a size comparison with the Skyline and another top shelf EDC blade, the Benchmade Mini Griptilian:

Kershaw Skyline Review – Final Thoughts

This is an amazing knife that has stood the test of time. The build quality is extremely high. Everything feels nice, the knife is well put together, and the materials are all of high quality. The Skyline is thin, lightweight and unassuming, which makes it an ideal choice for EDC. I often forget that I have it in my pocket. For around $40, you can use it guilt free.

In a perfect world, the Skyline would come with a 4 way pocket clip to ensure maximum versatility, and the detent strength would be improved to ensure better flipping action. Beyond that it is tough to find fault with the Skyline.

There is a reason why the Skyline remains so popular among knife enthusiasts for years and years: it is an excellent knife.

Kershaw Skyline (1760), Lightweight Pocketknife, Manual Open 3.1” High-Performance Sandvik 14C28N Stainless Steel Blade, Stonewashed Finish, Textured G-10 Handle, Reversible Pocket Clip, 2.5 OZ

3.1” blade made of high-performance Sandvik 14C28N stainless steel, offers excellent strength, corrosion and wear resistance
Lightweight G-10 handle scales offer a secure grip with texture and a deep index-finger contour
The drop-point blade offers good balance and a strong, hard tip. The rugged Stonewash finish is capable of hiding scratches and fingerprints
The perfect EDC for cutting tasks such as opening difficult packages, breaking down boxes, removing zip-ties, cleaning small game, aggressive animal defense, slicing fruit, and stripping small wire
An excellent gift idea for any hunter, hiker, hobbyist, carpenter, angler, backpacker or any knife enthusiast in need of a highly reliable, American made pocket folder

I recommend purchasing the Kershaw Skyline at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews. Any and all support is greatly appreciated. Thank you very much.