Recommended EDC Knives

Spyderco Para 3 C223GP Review

The Para 3 started as a fantasy: “Wouldn’t it be great if there were a smaller version of one of the most storied modern production knives of all time?” Then, this fantasy became a rumor, and that rumor became a confirmed project. Then there was a year-long lull. Then all of a sudden, in a whirlwind three months, the Para 3 was unveiled and released.

Buy the Spyderco Para 3 at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B01NBRLS5S” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]
Expectations were not just high, they were at that particular airless altitude where it’s hard to say that people were even aware of just what it was they were asking for. Companies like SOG, Cold Steel, and CRKT habitually release their knives in different sizes – why were we getting so excited about the Para 3?

Well certainly the Paramilitary 2 has a reputation few production knives can match. The knife community is almost unanimous in its praise for the PM2. Most of the criticism comes in the form of wishing for a smaller version. So if the Para 3 address this one issue, wouldn’t it be a perfecter version of a nearly-perfect knife?

No doubt about it, there’s a lot to talk about here. So let’s get into it.

General Dimensions and Blade Details

The Para 3 has a blade length of just about 3”, with a cutting edge of 2 5/8”, an overall length of 7 1/8”, and a weight of 3.37 oz. It is made in Golden, CO, and is the first Spyderco I’ve handled that was produced in their new facility. Although the Golden, CO knives are fundamentally different in overall ethos than the Taichung stuff, if this Para 3 is a fair representative of the new plant’s capabilities, they are every bit their equal in terms of fit and finish. Unlike some of those fine knives, however, the Para 3 doesn’t feel like a collectible in any sense. This is an immaculately finished EDC blade that you’re meant to use.

What do we call this particular Spyderco blade shape? To me it’s always been their most iconic, appearing on the PM2, the FFG Delica/Endura, and the full-size Military. It’s a great shape for everyday cutting, with all the cutting surfaces you want: straight edge, belly, and a pointy tip. Little performance is lost in the transition to a sub-3” cutting edge, either. It might be a little less efficient in long cuts (as through cardboard), but it gains a little more maneuverability, and that seems like a fair trade.

Spyderco is thought of as an ergonomics-oriented company, but they also always emphasize cutting performance. The Para 3 embodies a lot of Spyderco philosophies, but perhaps this one most of all. The blade stock is thicker than even the saber ground Delica, and yet the flat grind is such that the Para 3 remains a top-tier slicer. It’s tough and aggressive when it needs to be, but graceful and delicate when the situation calls for it. The satin finish is perfectly done to reduce friction as well – definitely a better finish than Taichung.

Some would have it that Spyderco’s S30V is sub-par, but others praise it to the skies. After using it on my Zulu, PM2, and now Para 3, I’m comfortable saying it’s very good. It doesn’t stay hyper keen after a day or two of frequent use, but it retains a clean, usable edge for a very long time. As for sharpening – well, I’m beginning to learn that any steel requires time and attention to sharpen properly. Be patient and maintain a steady hand, and it’s possible to get S30V very sharp, even with rudimentary skills and entry-level equipment.

Handle, Ergonomics, and Pocket Clip

The Para 3’s handle is very similar, but not identical to, the PM2’s. In addition to the obvious reductions in length, it has a more curved spine than its bigger brother. The edges of the G-10 have also been hit with a mild chamfer. Material choices are the expected (but excellent nevertheless) G-10 with nested stainless steel liners.

I think it’s safe to say that the ergonomics are what makes the PM2 so popular. Rarely is a knife so agreeable in the hand, and when it is, it allows all the other excellent elements to shine even brighter. The Para 3’s ergonomics is a story in three parts, starting with the forward finger choil and ending, surprisingly, with the clip.

Utilizing the forward choil, the Para 3’s ergos are excellent. Control over the smaller blade is exemplary, and you’ll have no problem with most cutting tasks. Even smaller details contribute: the curved butt end keeps things comfortable when you’re holding the knife hard or pressing down during a cut. Also, thanks to Spyderco for keeping the finger choil the same size as on the PM2. Nothing more disappointing (nor weirdly prevalent) than a too-small finger choil.

Moving down toward the main part of the handle, the news is less good. If I’m not using the choil, I can’t quite fit all four of my fingers in the main portion of the handle. My pinky usually lands right on the beak at the back, or falls back behind it. The beak isn’t so pointy that it would create a hot spot during most use, but the PM2 was so accommodating in both grip styles that it’s a bummer the smaller Para 3 can’t quite pull it off.

The clip also presents issues. The Spyderco spoon clip is utterly solid in and of itself. I have no complaints with the way it works as a pocket clip. Early reviews/opinions of the Para 3 have lamented the fact that it doesn’t carry deeply due to the large lanyard hole, which has to go above the clip instead of beside it as on the PM2. This means that a good bit of knife is sticking out of your pocket. I didn’t mind this, but I did mind the way the clip interferes with the grip in both positions. The problem is that it goes across so much of the usable handle it’s bound to press uncomfortably somewhere at some point. Not a constant hotspot, but it is noticeable enough to meaningfully detract from the in-hand experience.

As you can see from my pictures, I found a solution to this particular problem. Casey Lynch of Lynch Northwest is well-known for his aftermarket Spyderco pocket clips, and his short clip works perfectly on the Para 3 – and I mean perfectly: it feels like it was made specifically for this knife, and it fixes every issue the stock clip presents. The deep carry is just a bonus for me. Do I think you need the clip to enjoy the Para 3? No. Even stock, ergonomics are well above average. They just aren’t quite as good as the PM2 and the clip helps close that gap.

Deployment and Lockup

If you do a deep-dive on their forums, you’ll find that Spyderco’s bushing/stepped pivot system has been the subject of much discussion over the years. Nobody questions the fast deployment and free-swinging blade, just the variance in terms of lockup from knife to knife. You can get a PM2 that deploys with lightning speed, but you’ll rarely find one that you can dial all the blade play out of, no matter how slight. That was the case with my PM2, although it never bothered me.

My Para 3 appears to have the same pivot, but is even faster than my PM2 to deploy. It flips open with any sort of positive pressure at all – truly thoughtless deployment. It also stands firm once locked up, with nary a hint of play in any direction. On the PM2 I’ve found the Compression Lock to be a somewhat finicky one to maintain, but I’ll chalk that up to my inexperience rather than some mechanical failing. In terms of the Specialty Locks I think I like the Compression Lock best, despite my personal hang-ups. It offers serious strength while still keeping deployment smooth and fluid.

Para 3 Vs. Sage 5

The Para 3’s strongest competition comes from within Spyderco’s catalogue – and it’s NOT the PM2. I know a lot of people will get both, but to me the size difference is enough to put them in separate knife categories. The Sage 5, however, was released just months ahead of the Para 3, and is in the same product class of the PM3: EDC Compression Lock folder with a circa 3” blade.

The Sage 5 doesn’t have the mystique of the Para 3, but it is quite competitive in an objective sense. It’s lighter and it is better in the hand. The little beak and ill-placed clip that cause so much ergonomic drama on the Para 3 are gone on the Sage 5.

The Para 3, however, is an unquestionably better rendition of the Compression Lock: faster deployment and non-existent blade play where the Sage 5 is sluggish and has a little wobble. It is also better balanced; both knives offer phenomenal blade control but the Para 3 is more graceful and responsive.

How about cost? Well, the Sage 5 is about $15 more – not enough to give most of us pause, but tangible. And I’ll say that I think the Para 3 is perfectly priced. It is worth exactly $120 to me, and pretty much sets the limit for what I consider sensible spending on a pocket knife.

Ultimately, you can’t go wrong with either, and a full-fledged showdown between the two might be worth doing, but off the cuff I’m giving the nod to the Para 3: ergonomics are important, and the Sage 5 edges out the Para 3 in this category, but I like the blade shape and mechanics better on the Para 3, and it is certainly not a disaster in hand. And hey, you can use the $15 you save to buy a Casey Lynch clip and solve half of that problem anyway.

Spyderco Para 3 Review – Final Thoughts

The Para 3 has been so long in the coming that in some ways it’s just a relief to be able to say a bunch of nice things about it. I was a little skeptical that scaling down the PM2 would be redundant, but Spyderco managed to make it feel like a different knife, and a great one at that.

That being said I’m also not totally blown away. Some things to consider: If you can legally own the PM2, I still think it edges the Para 3 out in terms of design. Technically they aren’t in the same use category, but they do share design fundamentals and I’d rather have more variety amongst my tools than two very similar albeit excellent knives. The Delica 4 is a great EDC knife for half the price. There is also the Sage 5 to consider, as well as knives like the Native 5 and Caly 3.

So I guess the worst thing I can say about the Para 3 is that it’s just another great Spyderco design. This is an excellent follow-up to what is arguably their best knife. Is it a must buy world beater? No. But Spyderco managed to bring something long wished-for to life without losing the magic, and in and of itself that’s an accomplishment.

[easyazon_block add_to_cart=”default” align=”center” asin=”B01NBRLS5S” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

Editor: I recommend purchasing the Paramilitary 3 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews, and keep this review train running. As always, any and all support is greatly appreciated.

Spyderco Sage 5 Compression Lock C123CFCL Review

by Dan Jackson 23 Comments

I am sure a few people saw this review coming. When you consider my recommended EDC knives page, you can see that my general top 2 choices for someone is either the Spyderco Paramilitary 2, or the Sage 1.

Buy the Spyderco Sage 5 at BladeHQ

Buy on Amazon

I arrived at this conclusion after handling and reviewing hundreds of knives. There are a ton of other great Every Day Carry (EDC) options out there, but if I had to just suggest 2 knives to any random person off the ~~street~~ internet I’d say go with a Para 2 if you want a bigger knife with a 3.5″ blade, or go with a Sage 1 if you want something with a 3″ blade. Granted this assumes you are willing to spend $100+ on a pocket knife.

The Sage 5 takes the unassuming footprint of the Sage series, a product line designed to celebrate knife locks and their inventors, and matches it with the beloved compression lock. People have clamored for a smaller compression lock knife for years, and Spyderco has finally delivered with the Sage 5.

General Dimensions and Blade Details

The Sage 5 has an overall length of 7.17″, a 3″ blade, weighs 3.1 ounces, and is made in Taiwan. At the risk of sounding like a broken record, I like this size of knife for EDC. It’s not too big, and not too small. Compared with the Sage 1 this knife is a little lighter and thinner thanks to nested and heavily milled out stainless steel liners. The Sage 1 weighs 3.2 ounces, so only .1 of an ounce more, but it feels heavier in hand. I hate to use the “P” word these days, but I still think this may be the perfect size EDC knife for my purposes.

Like all the other knives in the Sage series, this knife features Spyderco’s leaf shaped blade. It’s simple and unassuming with its full flat grind and satin finish. The blade is ground from 3mm thick stock, and the end result is a blade that is thin and agile. It easily tackles cardboard, food prep, and mail. It will press into harder tasks if necessary. The tip is a reasonable balance of strength and precision. No surprises and no complaints with the blade.

Spyderco went with CPM S30V blade steel. This is the same steel they have used on the other Sages I’ve handled. I think CPM S30V is good, but these days I would prefer to see Spyderco upgrade this to S35V. S35VN is tougher and I find it a little easier to sharpen. S30V can be brittle, and it can be relatively tough to sharpen. The heat treat can make a difference, but all things equal I think S35VN is a nice little upgrade of over S30V.

That said, the S30V here is plenty good and I have a lot of experience with it. The blade is relatively easy to sharpen, exhibits good edge retention, and is decently tough. As always, for more information on blade steel I invite you to check out my page on knife steel or I suppose you could re-read this section on my Sage 1 or Sage 2 reviews. The blades and steel are all identical.

Handle, Ergonomics, and Pocket Clip

The handle design is where we begin to see the uniqueness of the Sage 5. To the untrained eye you may not think there is much different from the original Sage 1. Sure, they share a similar faux carbon fiber cladding, but beyond that there are key differences to note. Specifically, the Sage 5 has nested stainless steel liners, while the liners of the Sage 1 are not nested. As previously mentioned, this results in a thinner and lighter knife. The Sage 5 has only 2 stand offs while the Sage 1 has 3. However, the Sage 5 does come with a sleeved lanyard hole, something I could live without. Also, the color of the carbon fiber veneer is slightly different from the Sage 1.

As you would expect, the fit and finish of this knife is immaculate. The handle is put together with the same eerie precision of all the other Taiwanese Spydies. If it wasn’t for the fact that someone wrote on the inside of the handle scales with a pencil, I would have not have guessed that a human hand touched this knife.

Like a lot of Spyderco knives that share this profile, the ergonomics are great. Just like the Para 2 and Dragonfly 2, you have a forward 50/50 finger choil. You also get a pleasantly jimped thumb ramp. It provides traction without being overly aggressive. The main portion of the handle easily accommodates a full 4 finger grip, while that finger choil gives you some extra options.

The Sage 5 comes with Spyderco’s wire clip. Ah, the wire clip. This is a love it or hate it thing. Personally, I love the wire clip. Here it is a bright stainless steel. My preference is for the black chrome version found on the Sage 1, but I must admit that this satin version looks nice with the rest of the stainless steel hardware. It reminds me of the Chaparral.

This knife carries like a slimmer and lighter Sage 1. That is to say, it carries pretty damn good. This is a knife you could carry with a suit or slacks if you wanted to. The fold over wire clip buries deep, and most people will probably mistake it for a pen. The Sage 5 is a knife you will forget is in your pocket.

Deployment and Lockup

Of course like all the other Sages the blade is opened with a thumb hole. It’s easy to access and the blade moves on phosphor bronze washers. No complaints there. However, I did run into a problem when trying to close the knife. The action was very stiff from the factory. I didn’t mind at first as I knew that my Sage 1 required a break in period due to its tight tolerances, but I became concerned when the action didn’t improve after a couple weeks of carry and a healthy application of Tuf Glide.

So I decided to take my Sage 5 apart to take a closer look and try to resolve the issue with the stiff action. The problem was that the blade would not shut easily, and I actually needed 2 hands to close the knife. Not ideal, especially when compared with the easy action of my Para 2.

I found that Spyderco used an industrial strength version of Loctite on this knife. I am glad I had my new WiHa drivers as I am sure my Husky set would have stripped out. It required a lot of force to crack the pivot open, but with a little patience and elbow grease I was able to get the knife apart.

I ended up adding a little more Tuf Glide and then re-assembled the knife. Everything came back together without issue and now the blade moves freely. I can now easily open and close the knife with one hand. I think the pivot was adjusted a shade too tight at the factory. If you run into this problem there is no need to take the knife completely apart. Just carefully adjust the pivot.

The compression lock works great here, now that the blade moves freely. For the uninitiated, this is not a “liner lock on the back of the knife”. This is a totally different lock that sandwiches the locking leaf between the tang of the blade and a stop pin. You can get a better feel of this from the picture. Spyderco claims this makes for a stronger lock, but I think the most significant benefit is that you can close the blade with one hand, and without putting your fingers in the path of the blade, much like an axis lock.

I was concerned that the compression lock might be a little figety on the small profile of the Sage, but it works fine. The lock itself is easy to manipulate and lockup is tight. This is a nice locking mechanism worthy of a spot on the Sage lineup.

Sage 1 vs. Sage 5

I am sure at least a couple people will be curious to get my opinion on whether I like the Sage 1 or the Sage 5 more. This was actually a lot harder than I thought it would be. Before I took my Sage 5 apart I would have said the Sage 1. It was just too tough to manipulate with one hand. Now that the pivot is loosened slightly and the knife has broken in, I really like the thinner and lighter Sage 5. It is very easy to manipulate with one hand and it carries even better than the Sage 1. As much as I enjoy the Sage 1, I gotta “keep it real” – I think the Sage 5 is an improvement.

Still, the Sage 1 will always have special significance for me. It was one of the first higher end knives I bought for myself, and I love the simplicity of the knife. It’s solid and perfectly made. I also appreciate the familiarity of the liner lock. The compression lock is great, but there is something very simple and comfortable about a liner lock. The Sage 1 is a great pocket knife and you can’t go wrong with it. But I do think Spyderco managed to make some improvements with the Sage 5. Neither will be leaving my collection. I’ll update the review if my opinion changes.

Spyderco Sage 5 Review – Final Thoughts

I am not sure a review of this knife was entirely necessary. Combining the footprint of the Sage series with a compression lock is a no brainer, and Spyderco executed this knife near perfectly.

In a perfect world I’d like to see S35VN and the pivot perfectly adjusted out of the box, but these are small quibbles on an otherwise excellent knife. I’m sure some might want a different pocket clip, but I love the simplicity and elegance of the wire clip. Sorry wire clip haters.

The Sage 5 will likely be a “must buy” for Spyderco fans, and a serious contender for anyone seeking a 3″ EDC knife in the ~$100 range.

Looks like I’ll have to make some room on my best EDC knives page. We have a winner.

Spyderco Sage 5 Prestige Folding Utility Pocket Knife with 3" CPM S30V Stainless Steel Blade and Black Carbon Fiber Laminate Handle - PlainEdge - Everyday Carry - C123CFPCL

High Performance: The Spyderco's Sage Series is a unique family of knives showcasing the innovative lock mechanisms that have helped define modern folding knife technology.
Designed to be Safe: The Sage 5 uses a compression Lock mechanism. This mechanism is substantially stronger than Linerlocks and its location allows the knife to be safely closed with only one hand without placing your fingers in the path of the edge
Dependable: Every Sage Series knife in the series features the same basic design parameters: a full-flat-ground, leaf-shaped CPM S30V blade, an ergonomic handle design with textured forefinger choil and thumb ramp, and wire clip.
Versatile: The Sage 5 is an extremely capable all-purpose cutting tool with skeletonized Stainless Steel liners nested into textured carbon fiber/G-10 laminate scales.
More To Love: The open-backed construction reduces the knife's weight and allows easy cleaning, while a reversible deep-pocket wire clip provides convenient tip-up carry on either side of the body.

I recommend purchasing the Spyderco Sage 5 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Northwoods Knives Indian River Jack Review

by Dan Jackson 13 Comments

I have been interested in traditional slip joint knives for a while now. I am not alone. Many have come to enjoy the pocket friendly lines of a simple slip joint, and the thinly ground blades cut like nothing else. Some might find the absence of a lock unnerving, but in my experience most of the time a slip joint is more than enough knife for normal utility tasks.

Buy the Northwoods Indian River Jack at KnivesShipFree

As I wandered down the slip joint rabbit hole I eventually came across the Northwoods Knives Indian River Jack. Here is a simple single blade pattern, but with an upgraded blade steel (in this case, CPM-154). No other bells or whistles to speak of. Some might refer to this as an ever elusive “perfect EDC knife”.

The Northwoods Knives brand was purchased by Derrick Bohn of KnivesShipFree sometime around 2010-2011. Northwoods were originally made by Great Eastern Cutlery and Queen Cutlery (2 American companies specializing in traditional folders), and Derrick has continued the tradition of having the knives made in the USA by these manufacturers. The knife in this review was made by GEC, although the current version of the knife is made by Queen (at the time of writing this article, mid 2015). IRJ’s are released in small batches. Due to the limited supply and unique selling proposition of a 154CM blade, demand for the IRJ is out of control. The knives quickly sell out every time a batch hits Derrick’s website.

I was fortunate enough to snag one of the 2014 GEC manufactured IRJs, and have been carrying the knife for many months now.

General Dimensions and Blade Details

The IRJ has an overall length of approximately 6.25″, a 2.5″ blade, weighs 2.2 ounces, and is made in the USA. This knife has a similar footprint to my cherished Victorinox Cadet, and is an ideal size for every day carry (EDC) in my book. Certainly, this makes for a fine gentleman’s folder. And given the limited quantities of the IRJ I would classify this as a collectible as well. As I try to compare the IRJ with other knives in my collection, I would almost classify this as a cross between the Cadet and CRK Mnandi.

The blade of the Indian River Jack is a simple drop point pattern. Again, it reminds me of the blade on the Cadet. Just dead simple. In this instance there is a very slight swedge. Still very simple. The blade has a full flat grind with satin finish, and is thin behind the edge. It is a beautiful slicer. Perfect for light tasks like opening mail and cutting up fruit, but certainly capable of tougher chores. It slides through cardboard, cuts rope, and whittles wood with ease.

My version of the Indian River Jack came in CPM-154 stainless steel. As much as I enjoy the charm of the high carbon steel blade on my GEC Viper, there is something to be said for the ease of maintenance of stainless steel. I can ride this knife hard, put it away wet (sometimes literally), and not have to worry about rust or heavy oxidation. I have been guilty of occasionally not cleaning and oiling my high carbon bladed slip joints as well as I should have, and coming back to find the blade covered with rust. Plus CPM-154 is just excellent steel. It takes an edge easily enough and holds it for a long time. Combine that with the super thin geometry of the IRJ’s grind, and you are left with almost unmatchable slicing performance.

Handle, and Ergonomics

The handle of the Indian River Jack is a simple pill shape, with nickle silver bolsters and brass liners. The handle comes in a variety of “covers” (handle scale materials). Mine happens to have jigged bone for the handle material, which is a handle material that I don’t have a lot of experience with. It certainly fits the traditional aspects of the knife. The nickle silver bolsters are highly reflective and lend a touch of class (and extra heft) to the IRJ.

Everything has been riveted together. Fit and finish is pretty good on my knife. The transition between backspring and spine of the blade on my example could be better, and there is a tiny gap between the liners and backspring. But beyond that the pieces line up and the finish work is nice. Given the price I am not disappointed.

In hand the Indian River Jack is a capable little knife. There is no jimping, no finger choils, no lanyard hole, no skull crusher pommel, no rubber inserts, or skateboard tape. Yet still the IRJ seems to work just fine. There is plenty to hold onto and I have enjoyed using the knife for a multitude of basic chores. As with any folding knife, it needs to be treated with care and respect.

While there is no pocket clip to speak of on the Indian River Jack, KnivesShipFree does include a leather slip case with the knife. The leather on the slip case is thick, and carrying the knife in the case is akin to carrying a small secondary wallet. Slip cases prevent the knife from getting beat up in your pocket, and I am a fan of these kinds of cases – especially for dressier pieces like this. It’s a nice touch and a great option for the IRJ, especially if you want to preserve the knife as a collectible.

Walk and Talk

I have disbanded with the usual “Deployment and Lockup” section since this is a slip joint. Instead, lets discuss the “walk and talk” of this modern traditional folder. The IRJ features a slim nail nick to access the blade. It is cut sharply and the knife is easy enough to open and close with two hands. This will never compare with the easy opening of a thumb stud, thumb hole, or flipper, but that is part of the charm of these older patterns.

The backspring on the IRJ is pretty snappy. I won’t proclaim to be an expert on the walk and talk of slip joints, but compared with some of my other slippies, I’d say it’s a on the strong side. The blade opens and shuts with a satisfying snap. There is no hard half stop, but the blade does seem to naturally rest in the half position. There is a little pinch of resistance there as you push the blade open or closed. All said the action on this slip joint is smooth and satisfying.

Indian River Jack – Final Thoughts

It should come as no surprise that I really like the Indian River Jack. The classic design, good fit and finish, and CPM-154 blade all serve to make it a winner in my book. Despite being somewhat rare and coveted, this is still a working knife at the end of the day. It isn’t perfect, but that makes it all the more endearing. Compared with the fancy folders of today, the $130 price tag is relatively modest.

In a way I have struggled to write this review. This knife is understated, but excellent. I wanted to give it the respect and appreciation it deserves without being over the top, because doing so would be incongruous with the knife. But maybe I should be over the top. This knife is worthy of the praise.

For those on the quest for the “perfect EDC knife”, the Indian River Jack could be a contender depending on your preferences. If you are like me, and gravitate towards small sleek knives for daily carry, then the IRJ checks a lot of boxes. Perhaps the limited availability is the biggest detractor to the IRJ. You have to scour the secondary market or keep an eagle eye on KniveShipFree (the only purveyor of Northwoods Knives) for when they get new shipments in. Regardless, the IRJ makes my list of best EDC knives. Highly recommended for fans of minimalist and traditional folding knives.

Indian River Jack – From $130.00
From: KnivesShipFree

I recommend purchasing the Indian River Jack at KnivesShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Buck Marksman Review

by Dan Jackson 12 Comments

Last Updated: December 2, 2019
You may have noticed a lack of reviews of Buck knives. I have nothing against Buck. I reviewed the Vantage a couple years back, and haven’t gotten around to reviewing anything else because nothing else in their lineup interested me that much. That is, until I saw the Marksman.

Buy the Buck Marksman at BladeHQ

Buy on Amazon

The Marksman is a collaboration with Grant and Gavin Hawk. Grant and Gavin are known for pushing the envelope with unique designs and locking mechanisms. They have done a number of collaborations with Kershaw, Chris Reeve, and Zero Tolerance. I think it was especially cool that they teamed up with Buck, because Buck is so well known as a traditional brand, and Grant and Gavin are so well known for re-imagining the folding knife. It is an interesting juxtaposition, and it definitely got my attention. Toss in a 154CM blade, bearings, “made in the USA” quality, and a retail price of under $100, and I’m thinking there might be room for another Buck review on this website.

General Dimensions and Blade Details

The Marksman has an overall length of 8.25″, a 3.5″ blade, and weighs 4.3 ounces. This full size knife feels surprisingly lightweight thanks to the aluminum handle. I have mostly been using the Marksman for yard work and weekend chores, and it has made a great carry for those heavier duty applications. I have cut down bamboo, busted open zip ties, broken down boxes, and performed mild food prep. The Marksman cuts well and is lightweight and functional.

It’s the kind of user knife like the Benchmade Volli, Hogue EX04, and Cold Steel American Lawman, that manages to remain in my collection. For whatever reason, most of my fancier knives end up getting sold, but I have a hell of a time parting ways with a good user.

The blade shape of the Marksman is classic Buck drop point. It has the oval thumb hole that they seem to favor, and the design is mild mannered when compared to the handle. It’s also a functional blade shape with a sturdy tip and high hollow grind. The blade has been left with a matte finish which isn’t anything too spectacular. You can still see some rough grind lines and the finish will pick up scuffs and scratches. The laser etched logos on the blade also has shown signs of wear and have faded after the occasional application of Bar Keepers Friend (a metal cleaner). I photographed the knife after using it regularly for a couple months and you can see how the black laser etching has been scrubbed away. I consider this a “happy accident” as I’m a big fan of sterile blades.

Buck went with good ole 154 CM stainless steel heat treated by Paul Bos. The edge has held up well and the Marksman is a fantastic cutter. I have mentioned earlier how I have been using this knife pretty hard (for me at least) and I have been pleased with the performance. It keeps a good edge yet remains easy to sharpen. I have always been a fan of 154CM so I am not particularly surprised by my experience. I will say that I have had 154CM rust on me a little on more than one occasion, so you need to keep an eye on it, especially if you are going to use the knife for food prep and not clean it like I have on several occasions. If you don’t let the knife get too crusty, a little of that Bar Keepers Friend will bring it back to new.

Handle, Ergonomics, and Pocket Clip

The Marksman has a black anodized aluminum handle with a steel backspacer. This makes for a lightweight and strong handle. The anodization on the aluminum has held up well and there are grooves milled into the handle for a little texture and visual interest. The backspacer integrates with the strap lock (more on that below) so you have something of a “closed construction” design. While aluminum isn’t the most sexy of handle materials, it is very practical. I think it suits the design of this knife. Although it first appears as if there is a lot going on with this knife, at the end of the day construction is simple and sturdy. All the pieces have been nicely finished and the handle has been well executed.

The Marksman is a full size knife. Ergonomically it is straightforward and performs like you would expect. What impresses me most when I use the Marksman is how nice and light it feels in hand. I will say that the strap lock is uncomfortable to use repeatedly – at least until you build some callouses up on your hands. The serrations on the lock are no joke, and they tore up my thumb at first. Having used the knife for months now I don’t feel anything uncomfortable, but it took some getting used to.

Buck went with a deep carry reversible pocket clip mounted on the butt of the handle. This is a lot like the clip found on the LionSteel SR-1. The clip itself is simple and sturdy. It buries the knife discretely into the pocket. I like the clip and the way the Marksman carries. It’s worth mentioning that the knife is fully ambidextrous.

Here is your pocket clip shot:

Deployment and Lockup

Grant and Gavin really know how to shake things up in the deployment and lockup section. Sometimes I find myself starting to yawn when I put this part of the review together, but the Marksman really gives me something to talk about.

So you are probably already aware that the Marksman uses a “strap lock” to lock the blade in place. Chances are you have never encountered a strap lock on a knife before. It’s a big strip of stainless steel that runs the length of the back of the handle and snaps into place over a protrusion on the back of the blade. What makes it cool is that in the closed position, it serves as a big spring, and when you hit the flipper the knife launches open effortlessly.

Here is a size comparison with a Spyderco Delica and Spyderco Endura:

I have never been a huge fan of assisted openers, but the action on the Marksman is really cool and satisfying. It’s unlike any other spring assisted knife I have handled, to the point where I am reluctant to even identify it as an assisted opening knife. Closing the blade is kind of like setting a bear trap, and the trigger takes only a very light touch. It makes a very distinct tinny sound when you deploy it. Even my girlfriend could pick up on the fact that something was different with this knife. If the novel deployment system wasn’t enough, Buck also included a caged bearing system. The bearings work great and the action is so smooth that the blade just falls shut. This is a knife that you can easily open with the flipper or the thumb hole.

To disengage the blade you have to pull up on the strap with the serrations on the side of it. The serrations are rough and your thumb will get chewed up when you first start using the knife – especially if you obsessively open and close it like I did. The initial pain is definitely a negative, but overall I found the strap lock mechanism endearing, and like it more than I thought I would. With some practice you can learn how to open and close the knife one handed. It takes some tough thumbs and a little finesse but even this southpaw has managed to figure it out.

Another interesting aspect about the lock is that it is fully adjustable with a set screw on the pommel. I have used the knife for months and have opened it thousands of times. I have yet to notice any blade play, but if some were to develop you could tune it out with the set screw and pivot.

Here is a parting shot with my Spyderco Para 2:

Blade centering is perfect on my knife.

Buck Marksman Review – Final Thoughts

The novelty of the Marksman is what made me buy it. The thoughtful design, solid build quality, and excellent performance are what made me keep it. I would have never guessed that I would like the Marksman as much as I do. I wrote this review back in 2014, and as I update it in 2019, the Marksman is still part of my rotation. It’s a truly excellent knife. Perfect for those looking for a workhorse EDC that’s different.

The knife definitely has some novel features to it, and it doesn’t disappoint in that respect. But at the end of the day what impresses me most about the Marksman is that it’s actually a really good knife. The strap lock is unique, and I love how the blade deploys. The knife is also lightweight, tough, and functional. The materials are all high quality and it’s nicely put together – especially at the price point and considering that it is USA made. It carries well, cuts cleanly, and is a lot of fun to open and close. The Marksman has really grown on me. I would go so far as to say this is one of my favorite designs in 2014. I am glad I gave it a chance.

With all of that said I realize that this knife isn’t for everyone. The futuristic design is bound to polarize people, and the strap lock and it’s sharp edges could be a deal killer as well. But if you are in the market for something different and like a good user blade, then the Buck Marksman should definitely be on your radar. I liked it so much it earned a spot on my recommended EDC knives page.

Buck Knives 830 Marksman Folding Knife with One Hand Opening Action

RAZOR SHARP BLADE- 3-1/2" Drop Point 154CM Steel Blade delivers excellent edge retention, corrosion resistance, and is suitable for heavy cutting applications. Closed Length 4-3/4" Weight 4.0 oz.
AMBIDEXTROUS ONE HAND OPEN - Opens with the flick of a finger. The unique SLS Strong Lock System is one of the strongest locking mechanisms on the market. Once deployed, it offers the strength of a fixed blade knife
SAFE AND SECURE GRIP - The Black anodized aluminum handle provides a comfortable and secure grip while you work. This tactical knife will hold up in the most demanding situations
CONVENIENT CARRY - Includes a removable, reversible, tip-up discreet deep pocket carry clip for easy attachment to your belt, pocket, or in your bag
MADE IN THE USA - FOREVER WARRANTY - Since 1902 Buck Knives has offered a lifetime warranty on our knives because we believe in the integrity of our products. This knife is proudly made in the USA.

I recommend purchasing the Marksman at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance 0562CF Review

by Dan Jackson 47 Comments

Last Updated: July 14, 2019
By this point we have seen quite a few of Hinderer / KAI collabs hit the market, and I have covered them extensively on the blog. We started with the heavily built 0550, moved to the critically acclaimed 0560, a knife that raised the standard for high end production pieces, spent some time with the controversial Kershaw Cryo, and recently the EDC-friendly Zero Tolerance 0566.

Buy the ZT 0562 at BladeHQ

Buy on Amazon

The KAI/Hinderer collaborations on go back a couple years, and surely by now everyone has had their fill of folders that resemble the XM-18. But still Zero Tolerance has insisted and recently released the 0562cf and the 0562.

“So what?” You might say, pointing to a drawer full of ZT boxes. You may be sick of hearing about ZT and Rick Hinderer pairing up. Well, the problem with the 0562 is that it may very be the best Zero Tolerance / Hinderer collaboration yet.

General Dimensions and Blade Details

The 0562 has an overall length of 8.25″, a 3.5″ blade, and weighs right around 5.5 ounces. The knife is smaller than the 0560, and bigger than the 0566. I know that a 3.5″ blade is a sweet spot for a lot of people’s daily carrys and it also happens to be the same footprint of the 3.5″ XM-18, which I consider the flagship XM for some reason. The 0562 carries discretely in blue jeans, but is big enough to be used as a work or self defense knife.

This is a good point in the review from me to distinguish the 0562 from the 0562CF. The 0562CF (pictured in this review) is the upgraded version of the knife with a carbon fiber handle scale and satin finished M390 blade. The 0560 is more of a working man’s version with a G10 handle scale and stonewashed Elmax blade.

For a detailed comparison of the two with beautiful photographs I invite you to check out my friend John Holbrook’s article and review of both knives here. Of course I’m only reviewing the 0562CF here, and went for the 0562CF because it was only $50 more and I was feeling fancy, but I think 95% of this review will apply to both models.

The blade on the 0562 is classic Hinderer drop point, modeled closely after his XM series of knives. The interesting thing about this particular model is that it has been given Rick’s “slicer” grind. The slicer grind is a slanting high flat grind that shaves quite a bit of material from his standard “spanto” grind. The slicer grind on this 0562 is actually pretty slicey, easily cleaving cardboard and rope. I find that Rick’s slicer grind on the regular XM is still pretty thick. This 0562 is the best slicing Hinderer collab I have handled.

The 0562 comes in either M390 or CTS-204P steel. My 0562 came in M390. M390 is a powered super steel by Bohler, and is capable of both being heat treated to 60-62 HRc and taking a beautiful polish. I have found edge retention to be excellent on M390. M390 is also relatively easy to sharpen for a super steel, making it a practical choice for someone that wants to regularly use the knife.

I am less familiar with CTS-204P, having only experienced it with my Spyderco Southard. In my experience CTS-204P also holds a nice edge and is reasonable to sharpen. I have had no problems with rust or corrosion. The jury is still out in terms of my long term opinion on 204P, but my gut reaction is that you will be fine with CTS-204P.

Handle, Ergonomics, and Pocket Clip

Just like a real XM, the handle of the 0560 is slab carbon fiber/g10 over a full stainless steel liner and then a titanium frame lock. You don’t have the extreme 3-d machining found on the 0560, which is fine by me because I think it’s part of the reason why they were able to keep the price down on these, but the edges are all chamfered.

Handle construction is very good. Zero Tolerance is no stranger to the world of high end production pieces, and they have struck a nice balance here of providing us with a sturdy knife with simple high end finishes like blackened barrel spacers, an oversized decorative pivot, and very good fit and finish. Compared with a real XM-18 3.5″, the 0562 is a much slimmer knife.

I really like the way the 0562 feels in hand. Gone is the terrible overly sharp jimping on the 0560. In its place you have a short row of tasteful and practical thumb jimping on the spine and a little recessed jimping by the pommel. The rest of the knife is smooth as a baby’s butt, although you do have a couple finger choils in the handle. I think they struck a great balance here and the 0562 feels very good.

For lovers of deep carry pocket clips, the clip on the 0562 is a triumph. It’s a very deep and discrete stainless steel clip that mates to a standoff at the very back of the knife. The end result is a fully ambidextrous clip that doesn’t leave a lot of holes in the handle. I am impressed ZT went this more stayed route rather than a flashy “ZT” branded clip. This level of restraint and classiness isn’t always found on their models so I gotta give credit where its due.

The spring action on the pocket clip is nice and strong and it holds the knife in place in your pocket. The 0562 is over 5.5 ounces, but it’s still a relatively thin knife and carries well for its size. All said I’m very pleased.

Deployment and Lockup

I am also pleased to report that the action on the 0562 is very good. Once again ZT has dialed in their detent and the blade explodes from the handle with the push of a finger. It doesn’t hurt that the blade rides on their proprietary “KVT” caged bearing system. Deployment is fast, reliable, and fun, and the blade falls back into place upon disengagement. The “thumb studs” are actually blade stops and I was not able to use them to open the knife.

For lockup we have a titanium framelock with a stainless steel lockbar insert. This is just like the lockbar insert found on the recently reviewed ZT 0808. It has been very well done. Lockup is early and confident, and there is no blade stick, lock rock, or any other malady that sometimes effects a framelock knife. Blade centering is dead on too. Rounding things out is a Hinderer lockbar stabilizer.

Zero Tolerance 0562CF Review – Final Thoughts

I have handled all of the Zero Tolerance / Hinder collaborations prior to the 0560 and I also recently broke down and finally picked up a Hinderer XM-18, so I thought that I have pretty much seen it all. The 0562 is still a very impressive knife. They have done a great job combining fixing the things that I didn’t particularly care for about the original 0560 (the oversize knife, sharp jimping) and added some nice subtle refinements and upgrades. I think they also did a good job not bringing over some aspects of the XM-18 that I could avoid (the 3.5″ XM-18 is very heavy and the action isn’t particularly impressive). The end result is a practical and well made knife at a competitive price point.

I know that some will want to know if the 0562 is as good as an XM-18, or whether will replace an XM-18. I’m here to say that those are still two very different knives. My 3.5″ XM-18 is an absolute tank. It’s over the top in many ways. I prefer the 0562 because it’s slimmer, more pocketable, cuts better, and flips better, and can be had for a fraction of the price of the XM, but I still appreciate the XM-18 for what it is: a finely tuned overbuilt hunk of G10, steel, and titanium.

I realize that I’m somewhat jaded by running this website, but I thought $250 for the Zero Tolerance 0562CF was very reasonable for what you are getting, and the G10 version retails for right at $200. I know a $200+ folding knife isn’t for everyone, but if you can justify buying a $200+ pocket knife then I’m here to say the ZT 0562 is awesome.

Zero Tolerance 0562CF Hinderer Slicer Folding Knife; 3.5” CPM-20CV Stonewashed and Satin Steel Blade, Carbon Fiber Front Handle, KVT Ball-Bearing Opening, Frame Lock and Reversible Pocketclip; 5.5 OZ, Black

Ultra-premium, durable CPM 20 CV stainless steel blade with stonewash and satin finishes offer outstanding edge holding capability and corrosion resistance
Hinderer flat-ground “slicer” grind provides both slicing efficiency and a tough point; handle has carbon fiber front scale and stonewashed titanium back
Reversible deep-carry pocketclip for left or right-handed, tip-up carry
Ideal EDC essential for everyday tasks—slicing, survival tool, cutting boxes, self-defense, tactical use or as the perfect gift
High quality, general all-purpose knife great for EDC or use when camping, fishing, hunting, working, utility or outdoor activities.Handle Length:4.75 inch

I recommend purchasing the ZT 0562CF at Amazon or BladeHQ . Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel American Lawman Review

by Dan Jackson 27 Comments

Last Updated: March 9, 2018
When I hear the words “hard use folder” it’s often accompanied by a mental image of dollar signs. For whatever reason, we have equated hard working blades with titanium, super steel, and triple digit price tags. Those knives are cool, and I am sure some are capable of getting work done, but not everyone has that kind of cash – and even if you do it can be hard to really buy a knife like that and drive it like you stole it.

Buy the Cold Steel American Lawman at BladeHQ

Buy on Amazon

That’s why I like the Cold Steel American Lawman. For around $85 you get a rock solid knife that you aren’t afraid to beat on. After all, what’s the point of a hard use knife if you can’t actually bring yourself to hard use it? I have thrashed on my review sample for years. Lets take a closer look at one of my favorite every day working tools.

General Dimensions and Blade Details

The American Lawman has an overall length of 8-1/8″, a 3.5″ blade, weighs 4.5 ounces, and is made in Taiwan. This is a nicely proportioned medium sized folder designed by Andrew Demko. I found it reasonable enough for every day carry, but could definitely see this as a dedicated work knife or tactical blade. The “Lawman” designation seems to fit well.

The Lawman features a simple drop point blade with a high hollow grind. The knife is thinly ground, making it an aggressive slicer, and the tip is reinforced to hold up against hard use and thrusting. I like the blade shape. It’s not as aggressive as many of Cold Steel’s other offerings but is still very useful. There is plenty of belly, the tip gets nice and sharp, and the knife generally cuts really well.

Originally, Cold Steel used AUS8a for the blade steel, which is basically the same as AUS8. AUS8 is known as a softer steel and a lot of people don’t like it. I like AUS-8 because a couple swipes on a Spyderco Sharpmaker restores the knife back to hair shaving sharpness.

In 2015 Cold Steel updated their lineup of knives to include CTS-XHP steel, an American stainless steel forged by Carpenter. This is a superior steel to AUS-8, although it adds approximately $30 to the price tag of the knife. I have experience with CTS-XHP with other knives, and have had hands on experience with the Cold Steel Ultimate Hunter in CTS-XHP. CTS-XHP will hold an edge longer than AUS-8, and it is still easy to sharpen.

Cold Steel also upgraded to blade coating from a cheap black teflon coating, to a high end DLC coating. DLC is probably the best coating there is, so it’s a great upgrade.

Handle, Ergonomics and Pocket Clip

The handle of the American Lawman is made primarily of two thick pieces of black peel ply G10. There are no liners of any kind inside the handle and the G10 screws directly into a black aluminum backspacer and stainless steel lock bar. In practice the handle is quite strong. The G10 is thick and I was not able to flex the handle at all – so I would not worry that this handle will not be up to hard use. Fit and finish is nice too. All of the edges have been nicely rounded and everything lines up well. This is a strong and well put together handle.

I really like the ergonomics of the Lawman. The handle is plenty large and allows for a comfortable grip. There is some shallow jimping on the top of the handle. It’s not aggressive but provides some texture and feedback for your thumb. The G10 is extremely high traction and provides a good deal of grip. One of my favorite ergonomic features is the forward choil. Much like the Spyderco Sage or Paramilitary 2, this forward choil allows you to choke up and really get some detail work done. I am a huge fan of the forward choil. Cold Steel usually doesn’t include this feature so I think it’s worth mentioning. Finally I want to say that the knife also feels comfortable in a reverse grip.

The pocket clip is standard fare for Cold Steel. It’s small black coated stainless steel clip. It’s very tight. The tight clip combined with the aggressive G10 means it can tear up your pants if you aren’t careful. The clip is reversible (they actually include 2 clips since it’s a curved design) and it allows for tip up carry only. In pocket the American Lawman carries well. The small clip buries the knife deep, so it’s a discrete carry, and the slim profile and relatively light weight makes for an easy carry.

Deployment and Lock

The CS Lawman uses a thumbstud and a half to get the blade out of the handle. The thumbstud is not entirely ambidextrous out of the box, but it is swappable. This is not the fastest deploying knife and it will require some wrist action if you really want to snap the knife out. This is mainly due to the strong backspring of the triad lock. I don’t mind the slow and purposeful deployment of the American Lawman, but if you are one to habitually flick your knife open and closed the Lawman be advised that this isn’t really that kind of knife.

The lock on this knife is quite interesting. It uses the Cold Steel Triad locking system. The Triad is a modified lock back system that utilizes a “stop pin” to redistribute pressure placed on the knife and lock and in theory it provides for a stronger lock. My experience with the Triad lock suggests that it is in fact very strong. Lockback knives are very strong in general and the Cold Steel version is at least as strong as a regular lockback. I like how this lock is designed to break in with the knife so it won’t require maintenance. The lock feels very crisp and nice and secure.

American Lawman or the Recon1 or the AK-47?

Chances are, if you are interested in the American, you may also be interested in the Cold Steel Recon 1 or the AK-47. If that is the case, I recorded a video where I do a detailed comparison of these 3 models that you may find useful.

Cold Steel American Lawman Review – Final Thoughts

If you are in the market for a hard use folding knife and have around $50 to spend, the American Lawman should be on your short list. This is an extremely rugged knife that feels good in hand and is capable of some serious cutting. The relatively light weight design and non-threatening blade make this a good choice for EDC, although the knife could definitely flex into a more “tactical” role. No doubt this is why Cold Steel has marketed the knife toward law enforcement.

The biggest gripe with this knife was always the sub-par AUS-8 blade steel and cheap teflon coating. Cold Steel blew those complaints out of the water, when they upgraded this knife to CTS-XHP and a DLC coating. At this point, the only grievance I can raise is that the pocket clip can be a little small / tight for some. It’s not my absolute favorite clip, but it’s not that bad either.

All said this is one of my favorite folders from Cold Steel. They don’t make a ton of stuff in the 3.5″ blade length and the subdued looks really gels with me. I highly recommend the American Lawman if you need hard a wearing utility knife and don’t want to shell out a ton of cash.

Cold Steel American Lawman Black Folder

Blade thickness: 3.5 mm
Blade length: 3 1/2 inch
Handle: 4 5/8 inch long. G-10

I recommend purchasing the American Lawman at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.