Made in the USA

Benchmade Dejavoo 740 Review

Last Updated: August 12, 2019
Today I am taking a look at the ultra classy Benchmade Dejavoo. Designed by the late Bob Lum, known for his simple and elegant designs and the Dejavoo is no exception. Now that he is no longer with us, his custom pieces are becoming incredibly difficult to find so for many the only way to experience his work is through a collaboration like he did here with Benchmade.

Buy on Amazon

Purpose

As far as utilitly is concerned, the Dejavoo is in an interesting position. While I wouldn’t put it directly in the tactical role (not a lot of traction on the handle or spine, not the strongest lock), it could certainly fill that void in a pinch. Also, it’s a little large for a so called “Gents Folder,” although I think it’s a fine looking knife and is suitably refined for that role. For the same reason it wouldn’t make the top of my list for an EDC knife, although it is relatively light and would make a pretty exotic EDC blade (the “mini” is a good size for EDC). Yes the Dejavoo is somethng of an anomaly and I think for most this is more of a collectible knife, especially since Lum’s passing (RIP).

General Dimensions and Blade Details

The full size Dejavoo sports a blade just under 4 inches (3.95″ to be exact) with an overall length of 9.12″ and a weight of 4.10oz (3.2″ blade and 3.5 ounce weight on the 745). 4 ounces is impressive when you consider how much knife you are getting here… and believe me, you are getting plenty of knife. Not only is the Dejavoo big, but it’s beautiful. The long slender blade arcs slightly and a thin swedge trails almost the entire length of the spine. It’s a beautiful, almost peaceful design that is distinctly “Lum” and innately appealing. I know the looks of this knife has enchanted many over the years – even the name “Dejavoo” hints to some magic lurking beneath the steel and G10.

And speaking of steel, the blade on the 740 is made of a thick piece of S30V, a high end steel that I like because of the great combination of edge retention, corrosion resistance and ability to take a razor sharp edge. Benchmade accentuated that great steel by giving the Dejavoo a full flat grind and a really nice factory edge.

Handle, Ergonomics and Pocket Clip

The handle of the Dejavoo is also pretty special. Just by looking at the pictures you can see the attention to detail Benchmade put in here. It has full steel liners with some very nicely finished G10 scales laid over it. The G10 is relatively smooth, and lightly finished to show the “grain” while still supplying some grip. It adds another layer of class to look of the knife. The handle is a semi flow through design, and uses a black backspacer en lieu of pillars. Everything is bolted together so you can take this knife apart if need be. The liners are also kind of special; the locking liner is made of titanium and the non locking side is made of 420J stainless steel (very tough) that has been milled out to lighten up the knife and help it feel “alive” in your hand.

I also have to say that the Dejavoo has some great ergonomics. First of all, the 740 is a good sized knife, so you are going to have plenty of real estate to accommodate various grips. Indeed, the Dejavoo feels good in either a forward or reverse grip and I don’t find myself struggling to find space for all my fingers. Also, the design itself is great. Your hand will fall in place, it’s not awkward or uncomfortable at all.

From a traction standpoint, this isn’t the grippiest knife. It’s a smooth handle, obviously designed for form over function. If you are buying this as a hard core “tactical knife” I am sure you would be disappointed. From a collector knife or even an EDC knife standpoint, this really isn’t an issue. Additionally, you will find jimping to be woefully absent… again, not really an issue in my opinion. There is a rather prominent thumb ramp (which is mirrored in the choil area, almost appearing like a “hilt” when the knife is closed) and it catches the hand nicely. Again, obviously a nod to the form over function approach that Benchmade sometimes takes with their higher end knives. In my opinion, if you want a knife that you can take into a foxhole with you, consider something built for the task, like an Emerson.

It is a nice looking clip made of a piece of folded over stainless steel. The clip rides very low, it has great retention and is well polished. My only beef is that it is right side tip down only.

Lock-up and Deployment

The Dejavoo features a thumb hole aka a “Spyderhole”. I love thumb holes, they are great designs, and it works really well here – both functionally and aesthetically. I am not sure what the deal is in terms of trademark infringement with Spyderco. Ironically, hardcore Spyderco fans may actually not like this knife because of the use of the Spyderhole, as they may view that Benchmade ripped off the design. Eh, that is the subject for another post (or perhaps a law review article) so I’ll just say “it is what it is.”

One thing to note is that the blade retention can use some work… actually it could use a lot of work as the blade practically falls out of the handle. That is a problem, especially if you are going to carry the knife loosely in a pocket or bag. It’s weird because my 2 biggest problems with the knife; tip down carry, and weak blade retention, kind of cancel themselves out because if you use the pocket clip, it’s going to be hard to accidently stab yourself when carried tip down.

As for the lock, Benchmade went with a liner lock here. I can see an argument for wanting an axis lock with this knife (and yeah, I love the Axis lock), but in truth, I think it would make for a totally different looking knife. There are plenty of options for axis lock fans (Griptilian, Onslaught, etc), and this stays true to the original Lum design, so a liner lock is fine with me. Lockup is nice and tight, although the lock bar itself is not the strongest I have seen. People have been fixing both the weak lock and retention by wedging a small piece of paper between the scale and the liner down by the butt of the handle.

Value

As far as value is concerned, I think price (just north of $120 for the model shown here) is fair when you consider the great materials and fit and finish. The smaller version sells for a little less and might make for a more practical EDC type knife. I think they are both fairly priced.

Benchmade Dejavoo Review – Final Thoughts

Well, what can I say? The Dejavoo is such a beautiful knife it makes it easy to ignore the little flaws. The major flaws, issues with retention and lockup, can be easily fixed with a small piece of paper wedged in between the lock bar and the scale. Color the paper with a Sharpie and you won’t even see it. Some might find modifying a brand new $100+ knife with a post-it-note to be a cardinal sin. However, there is so much that the Dejavoo does right, and it does it with class… it truly is worth a second look.

Benchmade Knives Mini-Dejavoo, Black G-10, Plain

Ergonomic Handle Design Round
Thumb-Hole Opener
Ultra-Premium Blade Steel
Country of origin: USA

Photo Credits: Many many thanks to Voygin for use of the beautiful photos. He does amazing work and has a very impressive collection.

ESEE Junglas Review

by Dan Jackson 32 Comments

Last Updated: July 21, 2021

Unlike a tattoo, a blog post is easy to edit. Easy to update. And that’s a great thing because I originally penned this review of the ESEE Junglas back in May of 2011. Currently it’s 2021. I’ve owned the knife for over 10 years now. That’s hard to believe. Time to update the review.

Buy the Junglas at BladeHQ
Buy on Amazon

Spoiler alert: Not much has changed. I loved the Junglas in 2011, and in 2018 I still love the knife. Only now I’ve beaten the hell out of mine for half a decade, so I can comment on all the experience I have with the Junglas. I’ve also added some new photography of the knife in it’s present condition. The handle has darkened with sweat and grime, and the coating of the blade shows considerable wear, but in my opinion this just adds character to a bad ass knife.

The Junglas remains my favorite big chopper. It’s the knife I reach for after a hurricane. Heck, it’s the knife I reach for as I get ready for a hurricane, as well as a knife I have used to break down countless branches, baton open logs for camp fires, and relieve a hell of a lot of stress.

General Dimensions and Blade Details

The ESEE Junglas has an overall length of 16.5″, a 10.5″ blade, and it weighs 22.5 ounces on its own, 33 ounces with the sheath. It’s a big knife. I can’t say I’ve brought it on any ultra light hiking trips. It mostly lives in my garage. But that size and weight make it a tremendous chopper, and it’s a very satisfying tool to heft and use. Although it shares some lines with a machete, it’s much stouter. Shorter and thicker stock. It’s more like a short sword. I like the dimensions and wouldn’t change a thing. If you need something smaller ESEE knives has an entire range of products for your consideration. This one is their big gun.

The blade is a long drop point made of a 3/16″ thick piece of 1095 high carbon steel. It does two things well: chopping and batoning. I have chopped a ton of tree limbs with this knife. My chopping technique isn’t the best, but if I’m concentrating I can get through a fresh 2″ thick limb in 3 swipes.

The knife comes with almost a full flat grind, so it’s not the most amazing knife to baton with (I prefer the Fallkniven A1), but what it lacks in geometry it makes up for with size. You can span large logs with this knife and beat the Junglas through pretty much anything. Mine has held up famously, although the powder coating is worse for the wear. I am glad it has worn down a bit, as it means less resistance when I am chopping.

The Junglas comes in 1095 high carbon steel. I am a big fan of 1095 for a big chopper like this. 1095 is tough, so it doesn’t chip easily, and it is easy to sharpen. It’s an excellent steel for chopping wood. Of course, being a high carbon steel it is more susceptible to rust than a stainless steel. ESEE mitigated this somewhat by applying a black powder coat. This coating wears well when compared to a cheaper teflon coating, but it will still wear. Regardless, the coating will help protect most of the knife from rusting. That said, you are going to want to keep this knife dry and oiled. I try to hose my knife down with WD-40 after every session. I have not had any major issues with rust following this protocol.

Handle and Ergonomics

The handle of the Junglas is simple, but it’s done right. The scales are 2 large slabs of canvas micarta, which provide good grip and durability. This knife is nicely finished. The edges of the handles are radiused (smoothed), and they line up flush with the tang. The micarta is held in place with 3 large allen bolts, so you can take this knife apart if need be. Extra steel protrudes from the pommel, and you can use that to crack nuts or the skull of a zombie invader.

The ergonomics of the Junglas are excellent. This is a knife I have chopped for hours and hours with. I’ve never had a problem with hot spots or discomfort. The handle fills the hand well, and the shape of the handle helps to hold your hand in place. The combination of the smart design and high traction micarta keeps the Junglas in your hand, even if you are a sweaty bastard like me, and near delerium from an afternoon of chopping in the 95 degree Florida heat. The ergonomics are outstanding and I can’t overemphasize that. It’s critically important for a big chopper like this, and the Junglas nails it.

Sheath

The sheath is often the weakest link from a production fixed blade. Most manufacturers spend their money on the knife itself, and the sheath sometimes feels like an afterthought. Thankfully this is a non-issue here because ESEE made a sheath as good as the knife, if not better.

The sheath is made of a combination of kydex and cordura. The kydex portion runs the length of the blade up past the hilt. The cordura portion is the fabric part that attaches to your belt and is removable with 4 fasteners.

My favorite part of the sheath is the sound it makes. The knife slams into the sheath with a loud “crack” that reminds me of a 12 gauge racking a round. It’s a sound that means business. Maybe it’s the 12 year old boy in me or something, but it find it immensely satisfying. If you don’t care for the sound, you can adjust the retention so it’s a little quieter.

Regardless, once locked in place this knife isn’t going anywhere. The secondary retention strap is there for a little extra security, and if you were going to jump out of an airplane with this knife, there is a way to physically lash the blade into the sheath. My friends, blade retention is not an issue.

And the sheath comes with all the bits and bobs you would expect here. There is a water drain, tons of eyelets for running paracord, and it’s MOLLE capable. And everything is built to the highest standards. My sheath shows very little wear. I appreciate how the secondary retention strap falls away, so you don’t cut into it while drawing out the knife. I’ve inadvertently sawn through the retention straps of other sheathes before. You don’t have that problem with this sheath. In fact, you don’t have any problems with this sheath.

In conclusion, this sheath rocks. ESEE thought of it all and you have a sheath that wears just as well as the knife.

As a parting size comparison shot, here is a shot of the Junglas next to an ESEE-3:

ESEE Junglas Review – Final Thoughts

There is a reason I keep coming back to this knife. The Junglas is a beast of a knife. My collection has ebbed and flowed over the years, but the Junglas remains a constant piece of gear. At around $175 this is not a cheap knife, but when you consider what a quality folding knife goes for this is an easy one for me to justify. If I lost it today I’d buy another one tomorrow. No questions asked.

And I think you get what you pay for. Nothing else comes close. The Becker BK-9 is about $100 less and is a great tool for the money, but the Junglas is the knife I continue to reach for. After owning this blade for over 5 years this is the highest endorsement I an offer.

Even if you are just a mild-mannered suburban guy like me, if you do your own yard work or enjoy the occasional campfire you will get a thrill out of owning and using this excellent knife.

ESEE Authentic JUNGLAS-E Survival Knife, Kydex Sheath, MOLLE Backing

ESEE Tactical Suvival Knives.
Kydex Sheath w/ Cordura Backing.
Steel: 1095 Carbon, 55-57 Rc. Finish: Black Powder Coat.
Hammer Pommel w/ Lanyard Hole. Flat Grind.
For Full Specifications, Features, Survival Kit Contents, Care, and Warranty Info Please See Description Below.

I recommend purchasing the Junglas at BladeHQ or Amazon. Purchasing anything through any of the links on this site helps support BladeReviews, and keeps this review train running. As always, any and all support is greatly appreciated Thank you very much.

Spyderco Manix 2 Review

by Dan Jackson 10 Comments

Last Updated: July 31, 2019
The Spyderco Manix 2 is one of those knives that I have been meaning to review pretty much since the start of this website. I’ve examined a lot of blades since then and now I finally have my thoughts on the Manix 2 together and can write on this fantastic heavy duty folding knife made in the good ole USA.

Buy the Spyderco Manix 2 at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Manix 2 is what I would call a “medium” sized folding knife. It is stoutly built and highly functional. We are looking at an overall length of 8 inches and a blade length of 3-3/8 inches. At 5 ounces this knife is going to be heavier than most other knives “in its class” but what you get for this weight is a strong design with killer ergonomics. Just to put things into perspective, the Spyderco Tenacious has roughly the same dimensions but comes in a full ounce lighter.

Part of what makes the Manix 2 on the heavier side is the hollow saber grind (also it has full liners – more on that later). This makes for a stronger blade, but the trade off is weight. Many users don’t particularly care for the saber grind, preferring a full flat grind. In that case, I would advise trying to find a “sprint run” (limited edition) of the knife as Spyderco often makes them with a full flat grind (like the version wearing BD30P in my video review). The blade shape is a classic leaf design and the tip is fairly delicate. There isn’t a ton of belly on this knife, but I find its plenty for most every day tasks.

Blade steel on the standard Manix 2 is 154CM. A classic steel, 154CM is known for being an all around performer. Edge retention, rust resistance, toughness and sharpen-ability are all good.

I gotta say though if you want a more exotic steel or a full flat grind, Spyderco has been rolling out some really cool sprint runs of this knife. It’s going to cost you more, but it’s possible to get this knife in S30V or even S90V, although you might have to head to the secondary market to do it. Who knows, down the road Spyderco might release this knife exclusively with a full flat grind like they did with the Endura and Delica, so if you like the saber grind I would get it while you can.

Handle, Ergonomics and Pocket Clip

The Manix 2 has a tried and true handle design: G10 scales over stainless steel liners. The G10 on the standard Manix 2 is black and well textured. I would say the G10 is aggressively textured and provides great grip and tactile response. The liners run the entire length of the handle and are not milled out (or “skeletonized”) at all in the standard version which adds substantially to the weight of this knife. The handle is a partial flow through construction with a metal backspacer taking up the front part of the handle, and some pillars holding the back part of the handle together.

Another notable feature on this handle is the over-sized lanyard hole. For a stout blade like this, a large lanyard hole is a very practical feature – if you take this knife camping or regularly engage in long and heavy cutting tasks, a lanyard could be a great option for you.

The ergonomics on the Manix 2 is where this knife really shines. At a glance you can see all kinds of stuff going on with the handle. First off, you have two large choils. This allows you to choke up on the blade for detail work generally get a comfortable grip. Also, a liberal amount of jimping has been applied to many parts of the handle (including the thumb ramp and choil of the blade itself). This jimping is very sharp (some say it’s even “too sharp”) and ensures your fingers wont slip. This is a super comfortable knife and it works well in many grips. Combine that with that extra bit of weight and I find it hard to put this one down.

The only downside to the great ergonomics is that the handle (and folded knife) is kind of bulky in the pocket. You get a great handle but you lose some ease of carry.

The pocket clip is a classic Spyderco “hourglass” clip, mounted very high on the knife for a nice deep carry. It’s not a 4 corners clip, but it allows for ambidextrous tip up carry which works very well for me. The rough G10 may start to tear up your pocket a little – if that happens you may want to consider sanding part of the G10 down.

Deployment and Lockup

Deployment with the Manix 2 is a snap. Spyderco selected an oversize 14mm thumb hole for this knife and it performs as well as it ever has. Of course, you have your standard phosphor bronze bushings which help speed things along, but I find the weight of the blade makes this knife deploy with great ease and authority.

The Manix 2 has a pretty unique locking system. It is a “ball lock” and it functions in fashion similar to a Benchmade Axis lock. A spring loaded piece (in this case a steel ball bearing partially encased in a chunk of polymer resin) is what holds the blade in place. The knife has a very solid lockup that can be disengaged without putting your fingers across the path of the blade. Note that the spring is very strong on this ball lock so it can be difficult disengage the lock with one hand and it may stick a little until the lock has fully broken in. I’ve found that it is entirely possible with a little practice to disengage the lock one handed (especially once the spring breaks in a little), but there may be a slight learning curve.

Also, please keep in mind what I said in the “purpose” section about spine whacks – while I think this is a very strong lock, it does appear to have an Achilles heel and there are confirmed reports of the lock failing when subjecting to spine whacks. I never advocate “spine whacking” a folding knife, but I want “keep it real” here and help you make a decision that is right for you.

Update – Apparently Spyderco has since fixed the problem with the lock mechanism failing when spine whacked. These new knives have a black ball lock rather than a clear one. I have yet to get my hands on one of these new versions, so maybe it’s time I picked up a new Manix 2 XL and checked it out.

Value

Currently you can get a Manix 2 for right around $80 shipped, and a low as $70 shipped if you want a combo edge or serrated version. At either price I think the Manix packs a ton of value. When you consider that this knife has excellent blade steel, an awesome handle, a rock solid locking mechanism AND is made in the United States, it definitely has some value. Also, this isn’t some dinky folder either. This thing is built tough and I would put the ball lock right up there with the Axis lock and could see this knife being used hard for a long time.

Spyderco Manix 2 Review – Final Thoughts

Spyderco has done it again. The Manix 2 pretty much has it all. Two of my biggest gripes include that the knife doesn’t come with a fully flat ground blade, and it’s heavy. If you opt for a sprint run version you can avoid these negative aspects. I also tend to find the ball lock a little clunky in comparison to an axis lock, but I know plenty of people who prefer Spyderco’s ball lock.

While I can’t say it’s my absolute favorite Spyderco (I’d put both the Sage 1 and Paramilitary 2 ahead of the Manix – just my preference), it’s a beefy knife with solid ergonomics, and is both well thought out and highly functional. Although the price tag has crept up over the years, I also like how the Manix 2 is made in America and can be had for under $100. The collect-ability of the knife is also very cool as Spyderco has released numerous Sprint Runs and spin off versions of the knife.

Sale

Spyderco Manix 2 Signature Knife with 3.37" CPM S30V Steel Blade and Durable Black G-10 Handle - PlainEdge - C101GP2

Superior Cutting Performance - Crafted with a 3.37-inch full-flat-ground CPM S30V stainless steel blade, this knife provides excellent edge retention, sharpness, and corrosion resistance, making it a reliable choice for demanding cutting tasks.
Ergonomic Grip Design - The durable black G-10 handle is thoughtfully contoured and textured, offering a secure and comfortable grip that enhances control, reduces hand fatigue, and improves safety during extended use.
Reliable Ball Bearing Lock - Equipped with Spyderco's patented Ball Bearing Lock, this mechanism provides smooth, safe, and ambidextrous operation, ensuring secure handling and easy one-handed use.
Customizable Carry Options - Includes a reversible pocket clip, allowing for convenient tip-up carry on either side, so users can customize the carry position to suit personal preference and comfort.
Enhanced Durability for Tough Use - Built with premium materials and a rugged construction, the Manix 2 is designed to withstand intense use, making it ideal for both everyday tasks and demanding outdoor adventures without compromising performance.

I recommend purchasing the Manix 2 at Amazon.com or BladeHQ.

Photo Credits: Many thanks to Cougar337 for the beautiful Manix 2 photographs! Thanks again!!

Kershaw Junkyard Dog II Review

by Dan Jackson 12 Comments

Last Updated: August 11, 2019
To the average person the pocket knife has remained virtually unchanged over the years. But as collectors and enthusiasts know, this industry is full of innovation. In fact, I argue that there has been more innovation in knife design over the past 20 years than in the previous 200 years. The Junkyard Dog II Composite (JYD II) is a great example of this, with its ultra cool composite blade. Designed by Tim Galyean, the JYD II is a fantastic blend of fantasy and function and is proudly made in the USA.

No products found.

Purpose

The JYD II is not a small knife. I’ve read reviews where people are calling it a tactical. I’m not ready to call it that, and review it from that perspective, but I can kinda see where they are coming from. I would say the JYD II is more of a heavy duty EDC/utility knife. In a pinch it could be pressed into tactical use, but I think the blade shape was meant more for daily tasks (and hard tasks at that). Your mileage may vary.

General Dimensions and Blade Details

The Junkyard Dog II has a 3-3/4 inch blade and a closed length of 4 7/8 inches. This puts it right around 8 11/16 inches overall with a weight of 5.2 ounces. Like I said, the JYD II is not a small knife. You probably won’t want to bust this one out in the office, but it could make for a nice EDC if your job allows it. Some might find it a little on the heavy side but I think it is well worth it when you consider how much knife you are getting.

The blade is probably the first thing you will notice (assuming you get the ultra cool composite blade version – which I totally suggest doing if you are interested in this knife). This blade is in fact made of two kinds of steel. Kershaw chose a high end steel for the edge (CPM D2 tool steel), and a tough but decidedly less expensive steel for the rest of the blade (Sandvik 14C28N). From what I’ve gathered this is to reduce cost and make for a cool looking knife. Both reasons sound great to me.

On the subject of steel, the D2 edge steel is a great choice, with the CPM version being better. CPM stands for “Crucible Partice Metalurgy” and is a special process developed by the steel’s manufacturer, Crucible Metals. What Crucible does here essentially is powder the steel (by forcing the molten metal through a high pressure nozzle) and puts it back together so the grains are ultra tight on the molecular level. This was a poor explanation, but understand that the result is a finer steel and holds a better edge. Since D2 is already great stuff, we are talking about a pretty fancy piece of steel here.

Sandvik 14C28N is less impressive than the CPM D2, but it is still a great steel on its own (used in many popular Kershaw knives, like the Skyline and Scallion) and makes for an awesome “placeholder” for the D2.

So you are probably wondering how Kershaw puts these 2 pieces of steel together, and I was very curious myself. Apparently both pieces are laser cut, and then braze welded together with copper. The end result is a single piece of steel which is subsequently finished like any other Kershaw knife. The final bond is very strong. Kershaw claims it is as strong as a single piece of steel. I’ve never heard of the metal coming apart.

Ok, so a quick word on the blade shape. Again, I am hesitant to label this a “tactical knife” (not that my labels even matter – use the knife however you like) because of the blade shape. The tip is fairly blunt, and quite sturdy. Great for tough jobs, especially with that D2, but perhaps not the best choice for a defensive tool. Also, I gotta say the blade shape and overall “flow” of the knife kind of has a Ken Onion feel to it. Tim did work with Ken Onion at Kershaw, so perhaps that is where we get this design cue. Personally, I like it.

Handle, Ergonomics and Pocket Clip

The handle design and construction on the Junkyard Dog II is outstanding. We are looking at fairly typical handle construction: G10 over 410 stainless steel liners. The liners themselves are far less typical because they are some of the thickest I have seen on a liner lock knife. The addition of a FRN backspacer provides even more strength and rigidity (but makes the knife more difficult to clean). The result is a heavily built handle with a rock solid feel. Kershaw did attempt to lighten things up a bit by milling out the liners, and I think 5.2 ounces is pretty good considering how big the blade is and how thick these liners are.

The ergonomics are another outstanding aspect of this knife. The very nice (and unique!) design to the handle fits the hand comfortably and the textured G10 allows for a great grip. There is some jimping on the spine, but it is pretty “round” stuff. Probably due to the finish Kershaw puts on their blades. If jimping is your thing, you might want to modify this one, but I don’t mind it as is. Overall, I am very pleased with the handle design and ergonomics.

Now the pocket clip, well, that is probably my least favorite part of the knife. First of all, it isn’t reversible or ambidextrous, and I think it is far too big. I’m not a fan of the wide and flashy design either. The design is more a matter of taste (the look kind of “flows” with the rest of the knife) but I really hope Kershaw addresses the reversible and ambidextrous aspects of the clip. That said, this is an otherwise outstanding knife, and I would seriously consider getting the handle drilled/tapped and a custom low-rider clip made by a knifemaker like my friend STR.

Deployment and Lock

Like many Kershaw knives, the JYD II uses a flipper for deployment. I like flippers alright, but I’d love to see some thumb studs on here too – it’s what I’m used to most. That said, the flipper and the phosphor bronze bushings do a great job with deployment and the Junkyard Dog II moves very fast. Something to note is that this knife does not have the speed-safe assisted open mechanism common on a lot of Kershaw knives. I like the unassisted opening so I don’t count this against the knife. I know some people really like the assisted opening knives.

I’ve already commented on the liner lock, but just to reiterate, this is one of the more solid liner lock knives I’ve held. Kershaw did not skimp on the steel here and the liner covers almost 50% of the blade when the knife is open – very impressive. Despite this heavy liner, it is still an easy knife to close with one hand.

Kershaw Junkyard Dog II Review – Final Thoughts

One last thing to comment on is the value, and this knife has tons of it. If you go for the non-composite version the JYD II can easily be had for under $50. You will be hard pressed to find a new knife this big, strong and well made for under $50 folks, that’s just a fact (and it’s made in America too). The composite version is of course going to be more expensive at around $75, but even still that is a good deal for a very nice and unique knife with a high quality edge.

Well as you probably gathered, I really like this knife. Combine the heavy construction with a comfortable handle, a great blade and a cool innovation like the composite steel and there is not much left for me to desire. That said, the pocket clip definitely gives me some grief, but I can say that about a lot of knives on the market. All in all this is a very solid offering from Kershaw.

No products found.

Benchmade 915 Triage Review

by Dan Jackson 17 Comments

Last Updated: July 28, 2019
Rescue knives often go unnoticed in the knife community. There are large groups of enthusiasts gathered around tactical, survival, and EDC knives, but I have yet to see the rescue knife develop such a loyal following. One could argue that the average person doesn’t “need” a rescue knife, but do we really have a need for the collection of high end tactical knives stashed away in the safe? No, I argue that rescue knives traditionally “aren’t as cool” in the eye of the average consumer, and as a result most people haven’t been as excited about them.

Buy the Benchmade Triage at BladeHQ

Buy on Amazon

Well Benchmade is working hard to end that stigma and show that rescue blades can be just as cool and collectible as any other type of knife, by introducing the 915 Triage. But this knife doesn’t just look good. The Triage is part of Benchmade’s “Black Class,” which means it’s been designed and built with professional use in mind.

General Dimensions and Blade Details

The Triage has an overall length of 8.2″, a 3.5″ blade, weighs 5.1 ounces, and is made in America. The Triage, like most rescue knives, is a pretty big knife. This is a beefy knife and it has some heft when compared with something like the Benchmade Griptilian, which is comparable in length yet weighs only 3.2 ounces. However, we have to remember that the Triage has some extra hardware (a 440c safety cutter and a carbide glass breaker), has full stainless steel liners, G10 scales, and is built for maximum strength and durability.

The Triage sports a modified sheepsfoot shape blade with a high flat grind and a fine, slightly curved edge with just a slight amount of belly. This blade style is essential for a rescue knife because the blunted tip allows you to get in close to people you are rescuing without stabbing them. The flip side is, if you need something with stabbing capabilities, the 915 won’t have them. But this is a specialized tool so it was wise not to try and compromise. You have the option of a plain or combo edge, with a BK1 matte black coating or a plain satin-finished blade.

Benchmade chose N680 stainless steel for the blade. Made by Bohler-Uddeholm, this Swedish steel is specifically formulated for high corrosion resistance, even in salt water environments. It should come as no surprise that Benchmade has been using this steel in a few of their dive knives with great success.

Benchmade heat treated the N680 on this particular knife to 57-59 HRc, which will maximizes toughness for this particular steel while providing good edge retention and sharpenability. I think this was a great choice for a rescue knife because again, this thing is going to get abused. Its going to get wet and it probably won’t be sharpened as often so the unique properties of this steel will help preserve performance and enhance durability.

Handle, Ergonomics, and Pocket Clip

The 915 Triage handle is a semi-open design with textured G10 (available in black shown here, or safety orange) over full stainless steel liners. Like many Benchmade liners, they are made of 420J, which is tough stuff. As I mentioned previously, this adds weight, but it also adds strength. In the high stress hard use environments I could see this knife being used, I think it’s a good trade-off. The G10 used here is plain in appearance, but extremely grippy thanks to the aggressive texture applied in the factory.

In addition to the grippy G10, the ergonomics of the 915 are quite solid. There is no jimping on the spine of the blade, but there is a good amount on the handle, and it allows for good purchase and control. The handle is also nice and large, offering a comfortable forward or reverse grip. Also, the ergos are good when you are using the hook-shaped safety cutter, which is important since many people will be buying the knife for that feature.

The pocket clip is a blackened version of Benchmade’s typical deep carry pocket clip. This is a strong clip with good retention. It buries the knife discretely into the pocket, but still leaves enough for the user to grab easily. The handle has been drilled and tapped for ambidextrous tip up carry. The Triage is a heavier knife, but it still caries well thanks to the strong deep carry clip. All said, I am a fan of this pocket clip.

Lock and Deployment

The 915 Triage uses the tried and true Benchmade Axis lock. I’ve talked about this lock at length, but suffice to say it’s one of my favorite locks on the market. The Axis lock is strong, yet it is still smooth and easy to disengage. I also like how it is completely ambidextrous, and that you you can keep your fingers away from the blade when closing. Lock up is solid on my knife. It is not uncommon for axis lock knives to develop some side to side play, and if that happens a little lock-tite and the turn of a torx wrench puts you back in business.

Deployment on the Triage is fast and smooth thanks to prominent ambidextrous thumb studs and phosphor bronze washers. This is a time-tested formula for Benchmade and it works here as well. That said, I would be curious to see what this knife is like with a thumb hole. The blade is already pretty wide, but it might work well with a thumb hole. At any rate, the knife opens and closes smoothly. Blade centering is good on my knife.

Special Features: Safety Cutter and Carbide Glass Breaker

For many people a big part about what makes this a rescue knife is the additional features. Namely, the safety cutter and glass breaker. The safety cutter folds out and features a large (and sharp!) hook. Benchmade chose 440C for the cutter and I think it’s an excellent choice. 440C is good steel and when it’s properly heat treated it will work well. A cutter like this is used in those situations where the relatively big blade is either impractical or impossible to use.

The cutter doesn’t have a true lock, it clicks in place kind of like a slip-joint. It is reasonably secure and the rescue hook blade is extremely sharp. This is not a novelty or gimmick – this will cut through seat belts, clothing, and even shoe leather with ease.

The carbide glass breaker is sunk into the butt of the handle. It’s not big, but it will get the job done.

Benchmade 915 Triage Review – Final Thoughts

The Triage is a thoughtfully designed and well made knife. I like the practical design, the high quality materials, and the outstanding fit and finish – which is par for the course when you are talking Benchmade. What I like is how Benchmade took the rescue knife concept, upgraded it, and also turned it into something cool.

I am not a first responder, so I can’t comment on the knife with regards to how well it works in a first responder situation, but I can say that this is a robust knife and unique knife. I see no reason why it wouldn’t work well in a rescue situation. The glass breaker and safety cutter are fully functional and made to Benchmade’s typical standards. The knife itself is fully functional: it’s comfortable to use, it cuts well, and is easy to maintain.

Whether you are an actual first responder looking for an every day tool, or a normal person wanting a heavy duty EDC, I think the 915 Triage has a lot to offer, and remains the coolest rescue knife to ever cross my desk.

Sale

Benchmade - Triage 916 Rescue Knife, Safety Hook and Glass Breaker with Black G10 Handle (916SBK)

HIGH-QUALITY: The N680 stainless steel blade has the best corrosion resistance of any blade steel, making it ideal for saltwater applications. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures.
MADE FOR RESCUE: The Triage 916's opposing bevel blunt-tip blade style, safety hook, and glass breaker make it ideal for rescue. It's al
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Triage 916 is a manual knife that can be opened and closed with either hand.
ALWAYS READY: The 916's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.

I recommend purchasing the Benchmade 915 Triage at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Emerson CQC-7 Review

by Dan Jackson 8 Comments

Last Updated: October 3, 2016
Tactical knives are trendy, and it’s easy to get swept up in the latest trends. While I have seen a lot of great new knives come out recently, I’m still drawn to the classics… and you can’t talk about classic folding tactical knives without mentioning Emerson Knives.

Buy the CQC-7 at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00W536APE” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

In fact, many credit Ernest Emerson with the original folding tactical knife and his decades of work as a custom knifemaker has brought numerous innovations to the industry. Thankfully, Emerson produces a line of production knives that puts his rugged designs within the grasp of the common man (his custom pieces are crazy expensive – if you can even find one for sale). One knife that showcases a lot of what Emerson Knives is all about is the Emerson CQC7. The CQC-7 is also the subject of today’s review.

“CQC” stands for “close quarter combat” and “7” identifies the model in this distinctive series of knives. The CQC-7 was actually based off of Emerson’s CQC-6 design (which is only available as a custom piece) and was licensed out to Benchmade in 1994. After that license expired, Emerson began producing the knife in his own factory. My point here is, this knife has been around the block. It’s a simple and brutally effective tool.

Over the years Emerson has produced a variety of sizes and styles of the CQC-7. I’ll be examining the standard CQC-7 with a 154CM combo edge, G10 scales, Emerson wave (more on that later) and a titanium liner lock.

Intended Use

The CQC-7 is fully intended to be a combat knife. The name alone should be enough to tell you that this knife is designed for up close, last resort, hand-to-hand combat, but I’ll be going into what specifically makes this a weapon. That said, you could also EDC this knife. Aside from its size, it has some interesting nuances that might dissuade you from wanting to carry this knife every day, but I know a lot of people who love the CQC-7 and use it for every day tasks.

General Dimensions and Blade Details

The CQC-7 has an overall length of 8.0″, a blade length of 3.3″, a weight of 4.0 ounces and is made in the USA. The CQC-7 comes in a couple blade shapes. I’m reviewing the version with the tanto blade shape (CQC-7B) although you can also opt for a drop point version (the CQC-7A) in various finishes. The tanto shape has an inherently strong tip which makes the knife ideal for stabbing and thrust cuts – the kinds of cuts you would be performing in a defensive situation. A downside to the tanto is that I find it harder to sharpen.

There are 2 very interesting features about the CQC-7 blade that I need to talk about; the wave and the chisel grind.

The Emerson Wave Feature

The Emerson wave is a small protruding piece of metal on the top of the blade (back by the thumb disk) designed for rapid one hand deployment of the knife. It works by catching the wave on the edge of your pocket and forcing the knife open. Operated correctly wave deployment is the fastest way to open up a folding knife. If I did a poor job explaining the wave feature here is a video. (I didn’t film this so don’t blame me if the music isn’t exactly your thing.)

The wave is a great feature if fast deployment is your thing. Other knife manufacturers employ a wave feature but Emerson is the original. One thing to keep in mind is that you have to be careful deploying a knife like this in public because it snaps open so quickly – the average person probably hasn’t seen anything like it.

Chisel Grind

The other major feature with the blade is that it is chisel ground. For those unfamiliar with a chisel grind, it’s exactly what it sounds like – the knife is sharpened on one side only like a chisel, and the “back” of the blade is completely flat. Emerson apparently has their reasons for doing this including that it is easier to sharpen, holds an edge longer, and it has become something of a trademark for them. If you hunt around they do make knives in the more common “V” grind, but the CQC-7 I am reviewing does not have this kind of grind. One issue with the chisel grind is that it is hard to get a straight cut, the blade tends to drift towards the chisel side of the knife. If you are going to use this knife for long and precise cuts you may want to consider a version with the “V” grind.

Blade Steel

Emerson went with CPM-154CM steel for the blade. Benchmade uses a lot of 154CM and it is an all around excellent steel. That said, when you consider the price of this knife new (in the $120 range) a lot of people like to see more exotic steels. Honestly, this is another point that I will leave for you to consider. Of course I would like to see a more exotic steel but I think 154CM is very good. I certainly wouldn’t make it into a deal-breaker.

Handle, Ergonomic,s and Pocket Clip

The handle of the CQC-7 is made of G-10 scales over titanium liners. The handle has a glass laminate backspacer and is held together with phillips screws. I always prefer the pillar, or flow-through, construction knives but I know that this knife was meant to be tough so a partial backspacer makes sense as it probably affords more rigidity. I also think that titanium was an excellent choice for the liners. It is both strong and light and is a big part of what keeps this full size folder nice and light. The phillips screws are an interesting touch. Emerson reportedly uses phillips screws for easy take-down in the field – it’s a little different and I like it.

The ergonomics on the CQC-7 is where this knife really shines. The handle is spacious and the edges are perfectly contoured to meet the hand. The G10 is nicely textured to provide good grip. There is some jimping on the large thumb ramp as well as the choil although the thumb ramp jimping is still pretty smooth. This knife feels great in both forward and reverse grips and is built like a tank. These are major concerns for a fighting knife so it’s no surprise that “the original tactical knife” has great ergonomics and solid construction.

The pocket clip is superb if you are right handed. It is blackened, and has great retention. Unfortunately, the clip is not ambidextrous. In my opinion this is a major misstep. Also, the clip isn’t reversible from top to bottom so you are left with tip up carry only. If you are right handed and want to use the wave feature this should be fine, but for everyone else the non-positional clip leaves something to be desired.

Deployment and Lock

The CQC-7 has two main deployment options, the wave and the thumb disk. I’ve already spoke at length about the wave method of deployment and there isn’t a whole lot to say about the thumb disk. It is a disk that sits on top of the blade and functions like a thumb stud. It is big and the edges are ridged and provides a lot of room for you to easily deploy the knife with your thumb. I like the thumb disk, and with a little practice it becomes very natural to open the CQC-7.

The pivot screw of the CQC-7 is actually a flat head screw. This is another departure from most “normal” folding knives where you will find a torx or allen head pivot screw. Again, Emerson selected this for ease of take down in the field. I find the slot of the screw to be a little thin and impractical, but if you had to take this knife apart in the field it could be done.

Emerson selected a titanium liner lock for the CQC-7. The lock is adequately thick and does a good job holding the blade in place with zero play in any direction. That said, for a combat knife you might want something more substantial like a frame lock, axis lock or even a lock back. Knifemakers are raising the bar and I have reviewed a number of knives with solid titanium frame locks. The CQC-7 might be a little behind the times here although I think if Emerson added a frame lock it would probably push the price right up to the $200 mark.

Emerson CQC-7 Review – Final Thoughts

After handling a number of production blades, I can safely say that the CQC-7 is a really unique folding knife. The wave feature, chisel grind, and nuances in design and construction make this a “love it or leave it” type of blade. Some guys only carry Emerson knives while others have had a few and decided to trade or sell them off.

Personally, the quality and history behind the knives intrigues me but I am somewhat turned off by the chisel grind, relatively high price tag, and especially the non-ambidextrous pocket clip. That said, Emerson does make dedicated lefty models and there is plenty left to appreciate about this knife. The rugged design, solid build quality, and details that make an Emerson, well, an Emerson continue to please a large number of tactical knife enthusiasts.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00W536APE” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

I recommend purchasing the CQC-7 at Amazon or BladeHQ. BladeHQ has a great selection of CQC-7s and their prices are very competitive. Purchasing anything through any of the links on this site helps support BladeReviews at no additional charge to you. Any and all support is greatly appreciated – thank you very much.

Photo Credits: Many thanks to Mr. Smashy for the great pictures of the CQC-7. Thanks again Smashy!

Please note that these pictures are actually of the Mini CQC-7 but the knives look very similar (with the only difference being the overall size of the knives).