Made in the USA

Great Eastern Cutlery #73 “Cody Scout” Review

Last Update: August 11, 2019
Just a few years ago, it seemed that fans of traditional pocket knives and modern “tactical” folders didn’t intersect. Enthusiasts of modern designs (myself included) were often leery of the carbon steel, clipless carry, and two-handed opening. Before the days of Instagram, the most popular way for people to show off their everyday carry was via forum posts; and while it wasn’t uncommon to see something akin to a Case Peanut pictured alongside a Paramilitary 2, traditional knives were largely relegated to a back-up role. It didn’t help that more than a few of the companies producing traditional knives were bought out and had their labor outsourced to China, which meant that (at the time) quality of materials and manufacture plummeted.

Buy the the GEC Cody Scout at KnivesShipFree

However, over the last few years, companies like Great Eastern Cutlery and Queen have been taking up a larger share of the market for pocket knives. One of the first patterns produced by Great Eastern was the #73, which is based on the two-bladed trapper pattern, one of the classic American traditional knives. I went with a single blade pattern in green micarta. The blade pattern sacrifices some traditional flare in favor of greater utility, while the scales avoid some of the wear problems associated with the natural materials more often used with this type of knife.

General Dimensions and Blade Details

The “Cody Scout” has a single clip point blade, measuring at 3 1/8 inches of 1095 high carbon steel, with a closed length of 3 ¾ inches, an open length of 6 15/16 inches, and weighs in at 2.25 ounces. Oftentimes, clip points come with an exaggerated top swedge, but fortunately Great Eastern chose a sleek, useful blade profile. The already thin stock is taken down to a very fine edge, though yours may need some reprofiling. Evidently Tom Krein is offering regrinds of several GEC knives. Personally, the stock is thin enough that I can’t see the value in having the blade reprofiled, but if anyone can do it right it’s Tom Krein.

Once I had the edge established on mine, it performed with aplomb at slicing tasks, though the 1095 needs regular touch ups. I’ve had better luck with my Sharpmaker than I have with my strop but your mileage may vary. 1095 is frequently seen on traditional folders, and all knives produced by Great Eastern under the Tidioute Cutlery brand make use of it. This steel tends to deform rather than chip out, so those of you who are tired of dealing with S30V’s chipping problems may be intrigued.

As for rust resistance, the steel on my #73 has performed admirably. If needed, I wipe down the blade after use. A dark patina has developed, which helps prevent the iron-like taste high carbon steels can leave during food preparation, and also protects the knife from the more serious red rust. It may sound odd, but I’ve had more problems with rust on 440c and Aus8a blades (both of which are technically stainless). This iteration of the #73 lacks most of the branding typically seen on knives produced by Great Eastern Cutlery. Apart from a tang stamp on each side of the blade, there are no markings, even on the shield inlay.

Handle, Ergonomics and Carry

Many traditional knives feature natural materials such as bone, stag, or wood as the covers (for you modern knife guys, scales). These materials are beautiful, warm to the touch, and offer an additional element of refinement over the usual selection of G10 and carbon fiber. However, as natural materials, they are more subject to warping and deformation, which may or may not be a concern to you. I live in what is essentially a desert, complete with triple digits, extreme aridity, and the occasional dust storm (a la The Mummy), and felt more comfortable with micarta. It is a material I never tire of, as it has an organic appearance (similar to bone or wood) but with most of the rigidity and resilience of synthetic materials.

Here, the green linen micarta has been sanded down to a smooth polish. The chamfering on the handles combined with the simple trapper frame makes the knife a pleasure in the hand. I’ve never had hot spots develop in use, and the blade is finished so well that it makes a fantastic worry stone (though I can’t advise that in public). Apart from a hairline gap between the back spring and the brass liner (which is only detectable by holding it up to the light), the quality of manufacturing is immaculate. The #73 is a popular pattern in the GEC line-up, so you will likely be able to select the cover material that suits you best.

I purchased a leather slip case along with the #73. Prior experience with traditionals and large Swiss Army Knives has shown me that clipless knives (barring exceptionally odd dimensions) tend to roll around in the pocket in the course of a day, and quickly become a hassle. The leather pouch is made by KnivesShipFree and distributes the weight of the knife in pocket. While it does add a step to accessing the blade, it makes a knife that I would normally consider unpocketable quite pleasant. Besides, if you are interested in quick access, a traditional is likely not the correct call to begin with. The quality of the slip case is excellent, but one of the nylon stitches (melted together) came loose. Quick application of Fabri-Tac solved the issue, though it’s something to be aware of. I opted for the weatherproof finish for this pouch, but that costs extra.

Walk and Talk

The pull on the Cody Scout is smooth, snappy, and very stout. Many reported that the #73 (not the Cody Scout in particular) was a “nail-breaker,” though mine isn’t nearly as tough. It’s worth noting that many of my friends have a hard time opening this knife. If you are acclimated to slip joints, you should be fine, but keep in mind this knife has a reputation for being a bear to open. I prefer to get the pull started with my thumbnail and pinch the blade from that point, as I find the extra purchase helps me open the knife in a more secure fashion. The half-stop doesn’t jerk the blade away from your fingers, which is a concern for some. I prefer slip joints with a strong pull, but that doesn’t mean this knife is safer because of it. As always, use knife sense and exercise caution.

GEC #73 Cody Scout – Final Thoughts

Traditional folders also exist in a space that many knife companies are leaving behind. As framelock flippers have taken over the market, we’ve seen a massive spike of options in the $200 plus range, while the options at less than $100 have stagnated. The average knife from Great Eastern Cutlery will cost you between $70 and $100, which undercuts many of the new offerings from Spyderco, Benchmade, and Zero Tolerance. Although the materials are not bleeding edge, they are from an era when knives were used much more frequently.

One of the reasons folks tossed a small traditional in their pockets on top of the modern knife they were carrying was that traditional knives have a very nonthreatening appearance. Modern folders can attract funny looks in the wrong environment, but traditional folders and multitools don’t seem to suffer from the same problem.

Whether due to clever marketing, an oversaturation of titanium framelock flippers, or a good value proposition, traditional knives are making a comeback. The tight manufacturing tolerances of companies such as Great Eastern and Queen lead me to believe that the resurgence of traditional knives will last.

I’ve been more than satisfied with the #73 in the month or so that I’ve owned it. The 1095 requires regular maintenance, but apart from that, this is close to my ideal everyday carry knife. If you’re the type to fuss over natural materials but want to give traditional knives a try, consider this blade. Personally, the “Cody Scout” seem more timeless than many traditional knives in production, which appear to be thoroughly grounded in the early twentieth century. Even if you’re only looking at traditionals as back-ups to more modern pocketknives, I’d point you to the #73. It possesses enough charm to put all but the most fervent of anti-knife folk at ease, but also wouldn’t be out of place next to a Sebenza.

GEC #73 Cody Scout – From $82.53
From: KnivesShipFree

Editor: I recommend purchasing the Cody Scout (and any of its derivatives) at KniveShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Northwoods Knives Indian River Jack Review

by Dan Jackson 13 Comments

I have been interested in traditional slip joint knives for a while now. I am not alone. Many have come to enjoy the pocket friendly lines of a simple slip joint, and the thinly ground blades cut like nothing else. Some might find the absence of a lock unnerving, but in my experience most of the time a slip joint is more than enough knife for normal utility tasks.

Buy the Northwoods Indian River Jack at KnivesShipFree

As I wandered down the slip joint rabbit hole I eventually came across the Northwoods Knives Indian River Jack. Here is a simple single blade pattern, but with an upgraded blade steel (in this case, CPM-154). No other bells or whistles to speak of. Some might refer to this as an ever elusive “perfect EDC knife”.

The Northwoods Knives brand was purchased by Derrick Bohn of KnivesShipFree sometime around 2010-2011. Northwoods were originally made by Great Eastern Cutlery and Queen Cutlery (2 American companies specializing in traditional folders), and Derrick has continued the tradition of having the knives made in the USA by these manufacturers. The knife in this review was made by GEC, although the current version of the knife is made by Queen (at the time of writing this article, mid 2015). IRJ’s are released in small batches. Due to the limited supply and unique selling proposition of a 154CM blade, demand for the IRJ is out of control. The knives quickly sell out every time a batch hits Derrick’s website.

I was fortunate enough to snag one of the 2014 GEC manufactured IRJs, and have been carrying the knife for many months now.

General Dimensions and Blade Details

The IRJ has an overall length of approximately 6.25″, a 2.5″ blade, weighs 2.2 ounces, and is made in the USA. This knife has a similar footprint to my cherished Victorinox Cadet, and is an ideal size for every day carry (EDC) in my book. Certainly, this makes for a fine gentleman’s folder. And given the limited quantities of the IRJ I would classify this as a collectible as well. As I try to compare the IRJ with other knives in my collection, I would almost classify this as a cross between the Cadet and CRK Mnandi.

The blade of the Indian River Jack is a simple drop point pattern. Again, it reminds me of the blade on the Cadet. Just dead simple. In this instance there is a very slight swedge. Still very simple. The blade has a full flat grind with satin finish, and is thin behind the edge. It is a beautiful slicer. Perfect for light tasks like opening mail and cutting up fruit, but certainly capable of tougher chores. It slides through cardboard, cuts rope, and whittles wood with ease.

My version of the Indian River Jack came in CPM-154 stainless steel. As much as I enjoy the charm of the high carbon steel blade on my GEC Viper, there is something to be said for the ease of maintenance of stainless steel. I can ride this knife hard, put it away wet (sometimes literally), and not have to worry about rust or heavy oxidation. I have been guilty of occasionally not cleaning and oiling my high carbon bladed slip joints as well as I should have, and coming back to find the blade covered with rust. Plus CPM-154 is just excellent steel. It takes an edge easily enough and holds it for a long time. Combine that with the super thin geometry of the IRJ’s grind, and you are left with almost unmatchable slicing performance.

Handle, and Ergonomics

The handle of the Indian River Jack is a simple pill shape, with nickle silver bolsters and brass liners. The handle comes in a variety of “covers” (handle scale materials). Mine happens to have jigged bone for the handle material, which is a handle material that I don’t have a lot of experience with. It certainly fits the traditional aspects of the knife. The nickle silver bolsters are highly reflective and lend a touch of class (and extra heft) to the IRJ.

Everything has been riveted together. Fit and finish is pretty good on my knife. The transition between backspring and spine of the blade on my example could be better, and there is a tiny gap between the liners and backspring. But beyond that the pieces line up and the finish work is nice. Given the price I am not disappointed.

In hand the Indian River Jack is a capable little knife. There is no jimping, no finger choils, no lanyard hole, no skull crusher pommel, no rubber inserts, or skateboard tape. Yet still the IRJ seems to work just fine. There is plenty to hold onto and I have enjoyed using the knife for a multitude of basic chores. As with any folding knife, it needs to be treated with care and respect.

While there is no pocket clip to speak of on the Indian River Jack, KnivesShipFree does include a leather slip case with the knife. The leather on the slip case is thick, and carrying the knife in the case is akin to carrying a small secondary wallet. Slip cases prevent the knife from getting beat up in your pocket, and I am a fan of these kinds of cases – especially for dressier pieces like this. It’s a nice touch and a great option for the IRJ, especially if you want to preserve the knife as a collectible.

Walk and Talk

I have disbanded with the usual “Deployment and Lockup” section since this is a slip joint. Instead, lets discuss the “walk and talk” of this modern traditional folder. The IRJ features a slim nail nick to access the blade. It is cut sharply and the knife is easy enough to open and close with two hands. This will never compare with the easy opening of a thumb stud, thumb hole, or flipper, but that is part of the charm of these older patterns.

The backspring on the IRJ is pretty snappy. I won’t proclaim to be an expert on the walk and talk of slip joints, but compared with some of my other slippies, I’d say it’s a on the strong side. The blade opens and shuts with a satisfying snap. There is no hard half stop, but the blade does seem to naturally rest in the half position. There is a little pinch of resistance there as you push the blade open or closed. All said the action on this slip joint is smooth and satisfying.

Indian River Jack – Final Thoughts

It should come as no surprise that I really like the Indian River Jack. The classic design, good fit and finish, and CPM-154 blade all serve to make it a winner in my book. Despite being somewhat rare and coveted, this is still a working knife at the end of the day. It isn’t perfect, but that makes it all the more endearing. Compared with the fancy folders of today, the $130 price tag is relatively modest.

In a way I have struggled to write this review. This knife is understated, but excellent. I wanted to give it the respect and appreciation it deserves without being over the top, because doing so would be incongruous with the knife. But maybe I should be over the top. This knife is worthy of the praise.

For those on the quest for the “perfect EDC knife”, the Indian River Jack could be a contender depending on your preferences. If you are like me, and gravitate towards small sleek knives for daily carry, then the IRJ checks a lot of boxes. Perhaps the limited availability is the biggest detractor to the IRJ. You have to scour the secondary market or keep an eagle eye on KniveShipFree (the only purveyor of Northwoods Knives) for when they get new shipments in. Regardless, the IRJ makes my list of best EDC knives. Highly recommended for fans of minimalist and traditional folding knives.

Indian River Jack – From $130.00
From: KnivesShipFree

I recommend purchasing the Indian River Jack at KnivesShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 485 Valet Review

by Dan Jackson 16 Comments

Last Updated: February 2, 2019

2013 and 2014 marked pretty quiet years for Benchmade. Not a whole lot of interesting stuff rolled off their shelves. The Volli was my favorite and has proven itself to be an excellent knife. Beyond that there wasn’t a whole lot to report.

Buy the Benchmade Valet at BladeHQ

Buy on Amazon

Benchmade’s 2015 SHOT Show releases actually looked pretty strong. The 485 Valet was one model that caught my eye. Perhaps most surprising was that the knives became available about a week after the show. Gone are the days of lusting over pre-production tools at SHOT only to find them released sometimes years later. Initially I was going to hold off on acquiring a Valet, but all it took were a couple positive affirmations from Tony regarding his knife and I had a Valet en-route to my office.

General Dimensions and Blade Details

The Valet has an overall length of 6.69″, a 2.96″ blade, and it weighs 2.18 ounces. The knife compares favorably to the Benchmade Mini Griptilian although it’s much sleeker. The low profile handle and spear point blade were innately appealing. This is a slim every day carry (EDC) piece that easily doubles as a gentleman’s folder with a more modern flair.

The Valet’s packs plenty of cutting edge, a high flat grind, and a sturdy tip all into a sub 3″ blade. The blade is ground thin and it almost cuts like classic slip joint (not a bad thing). I had no trouble zipping through boxes, bags, and all the little stuff that comes across my path. Everything from sliding between the folds of an envelope free a cable bill to de-boning chicken thighs for a stir fry.

Benchmade went with Bohler M390 stainless steel for the Valet. I have been putting M390 through its paces between this Valet and my ZT 0620. Heat treated to 60-62HRc, M390 is a super steel with superior edge holding abilities, yet it is still easy to maintain. I have been putting the Valet through it’s paces, and I’ve been happy with the results. I sliced up a big stack of cardboard in an informal “cut test” and managed to wear the edge down a bit after a while. I ended up sharpening the knife on the fine stones of my Sharpmaker. After just a few passes I could tell the edge was coming back, and I was able to quickly restore the edge to hair shaving, paper slicing performance. M390 is also very corrosion resistant.

M390 is apparently very expensive (on a podcast Tony and I determined that it appears to sell for 3x as much as a more normal steel). Given the option I would have selected a S30V or 154CM version if it meant a substantial reduction in purchase price, but I appreciate that Benchmade is interested in offering a premium product.

Handle, Ergonomics, and Pocket Clip

The Valet has a sleek gray handle with smooth G10 over milled out stainless steel liners, and a gray G10 backspacer. Handle construction is typical Benchmade quality. The G10 is contoured (3D machined) has been nicely finished. The steel liners are flush, and the backspacer sits solidly in the middle. I like the gray. It’s different, but nothing crazy. This isn’t a big handle, but it’s well made.

The Valet is a small knife and it feels like a small knife. I’m able to get a full grip on it, but there isn’t much room beyond that. It’s perfectly fine for little EDC tasks. There is no jimping, or much in the way of notable ergonomic features. The little knife sits in your hand well enough, and is more than adequate for normal use. I did not find the smooth G10 to be “slippery” and did not have any issues using the knife normally.

The pocket clip is a nice stainless steel deep carry clip. It buries almost completely into the pocket and is discrete. The handle is drilled and tapped for ambidextrous tip up carry. I like this clip and I think it works well.

The Valet also carries really well. At under 3 ounces and you quickly forget the knife is in your pocket. Perfect as either a discrete primary EDC or a lightweight backup knife.

Deployment and Lockup

This is an axis lock knife, with thumb studs. Usually, that would be all I need to hear, but I am concerned that this time Benchmade may have tried to do too much with too little. The positioning of the thumb studs and axis lock feels cramped. The axis lock is smaller than on other axis lock knives, and the thumb studs sit very close to the handle. The knife looks cool, and it certainly works, but it isn’t the most comfortable knife to open and close repeatedly. I’ll be curious to see if anyone shares that opinion with me.

Lockup on my knife is good. Out of the box there was a tiny bit of horizontal blade play, and a little more developed after a month of use. Pretty much all of my axis lock knives have a little play in them unless I tear them down and loctite the pivot. I know some people aren’t fans of the axis lock (too many moving parts and small springs to break), but I have always liked them. This one is smaller than I’m used to, but it still works.

Benchmade Valet Review – Final Thoughts

I am a little divided on the Valet. On one hand, it is a really slick little folder. I have been getting more and more into gents folders for daily carry, and visually this one ticks a lot of boxes for me. I like the smooth G10 handles, and the thin flat grind and spearpoint blade are excellent. My knife came well finished, and I didn’t run into any major QC issues that some folks have reported on first run Benchmades.

But a couple things turn me off on the Valet. The fiddly “landing gear” (small thumb studs placed very close to the knife and small axis lock) is my biggest concern. I would not recommend this knife for people with larger hands. I’m not Andre the Giant, but the position of the lock and thumb studs seems too tight for repeated use (or the mindless flicking open and closed of pocket knives while watching TV). Certainly this could be a “Your Mileage May Vary” thing. This is a beautiful knife, but I think BM leaned a little into far into “form over function” territory on this one.

I also think the price is also worth mentioning. $170 is a large sum for a small knife. I would have loved to see the Valet on the tail end of $150, and not on the tail end of $200. I realize that M390 is expensive material, and I think that folks who really appreciate a premium steel will have an easier time justifying the cost. Personally, I am not convinced this steel is worth the extra money.

But I don’t mean to end this review on a down note. The Valet potentially has a lot to offer. If it fits your hand well then there is little left to complain about. The Mini Griptilian is still my go to small Benchmade, but the Valet could be a worthy upgrade if it fits your hand and budget.

Benchmade - 485 Valet Knife, Drop-Point Blade, Plain Edge, Gray G10 Handle

HIGH-QUALITY: The M390 premium stainless steel blade offers exceptional cutting ability, wear resistance, and corrosion resistance. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The 485 is a manual knife that can be opened and closed with one hand.
COMFORTABLE: The 485's lightweight design and contoured handle make it comfortable to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Valet 485's drop-point, utility blade style and all-around functionality make it ideal for everyday carry and use.

I recommend purchasing the Valet at Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance 0620CF Review

by Dan Jackson 13 Comments

Last Updated: August 3, 2019
I have given Zero Tolerance over the past year. So I actually had to pause and think when my pre-order for the 0620CF popped into my inbox. I try to feature a variety of knives from different manufacturers. Would I purchase and review this knife? I slept on it for a few days, and decided that this collaboration with Ernest Emerson was special enough to justify another Zero Tolerance review.

Buy the Zero Tolerance 0620CF at BladeHQ

Buy on Amazon

I’m glad I made that decision, because when this knife arrived I could immediately tell it was significantly different from the other ZT offerings I have sampled.

General Dimension and Blade Details

The 0620 has an overall length of 8.5″, a 3.6″ blade, and weighs 6.2 ounces. While the Kershaw / Emerson collabs are scaled down offerings, the 0620 more like a full size Emerson. This thing is large and in charge. It suits the nature of the collaboration well, but relegates the knife to a more dedicated defensive role or collector’s item. At least for me. I don’t doubt some will every day carry (EDC) this knife, and there is nothing wrong with that if you can manage the size and weight.

The blade has always been one of my favorite aspects of an Emerson. The crisp grinds and beautiful finishes of the blade contrast oddly with the often crudely finished handles. I am pleased to say that ZT did Ernest right by the 0620. This is an immaculate American tanto complete with Emerson’s 2 tone finish: satin bevels and stonewashed flats. The multi-faceted grind has been beautifully done and the blade catches the light almost like the real deal.

Where this collaboration departs from a real Emerson is that ZT decided to V-grind the edge. Say what you will about chisel edges… easier to maintain “in the field”, cut better, blah blah blah – I’ll take this standard V-grind edge any day.

I have never been a huge tanto fan, but this version features a subtle curve between the tip and secondary point. It speaks to me the same way the Lum Tanto did – a tanto blade for guys who don’t prefer tantos.

The natural geometry of a tanto blade is excellent for stabbing, and this one with its clipped point is no different. While this is a beefy slab of steel, the flat grind is lean enough to make this a reasonable slicer, and the edge has been expertly applied.

If you aren’t a modified tanto guy, ZT is releasing the 0630, featuring a modified clip point blade, much like the CQC-8 Horseman that may be more to your liking. Personally, I have been enjoying the tanto as I currently don’t have a lot of tantos in my collection.

Much like the 0562, ZT is offering the 0620 in two flavors: M390 blade with a carbon fiber handle scale (shown here), and an Elmax blade with a G10 handle scale. M390 is a super steel and I have always treated it with a little apprehension because super steels have a reputation for being difficult to sharpen. I put my big girl panties on for this review and have been actually, like, using both my 0620 and my Benchmade Valet which is also in M390. Edge retention is exceptional and so far the steel has responded well to light stropping. This is all I have had to do over the past 8 weeks or so of use. This is excellent stuff and I look forward to continuing to evaluate M390 in earnest.

Handle, Ergonomics, and Pocket Clip

The 0620 has as thick titanium locking side and the show side is carbon fiber (or G10) over a full stainless steel liner. Construction is robust, to say the least. This is an extremely solid knife and it’s difficult to describe the feeling you get in handling the 0620. Each edge is rounded, the liners and carbon fiber are seamless. Beefy hardware sits securely in the handles. The heft of the thick titanium lock side adds to the gravitas of the knife. It is impressive.

While ZT didn’t include Emerson’s signature flat head pivot and Phillips head body hardware, they did borrow the oversize hex head pivot from the 0300 and included some beefy torx hardware and stand offs. They also included a lanyard post, which seems redundant placed next to the two stand offs, but looks to be removable.

In hand the 0620 feels like a beefed up Emerson – not a bad thing at all. The simple handle design is Emerson ergonomics at its finest. A forward finger groove indexes the finger nicely, and the wide thumb ramp is gently jimped for control and tactile feedback. The rest of the handle is simple and accommodates a wide variety of hand sizes. The 0620 is a pretty thick knife – not amazing in pocket, but excellent in hand. After working with the 0620 for several months I haven’t noticed any hot spots. Job well done by both Ernest and ZT.

The pocket clip looks almost as if it were plucked from the Emerson parts bin – it’s a carbon copy of what you would find on the real deal, except of course for the Zero Tolerance Logo emblazoned on it. It is a blackened steel clip, much like what you would find on a Benchmade Griptilian if you have never handled an Emerson. The handle has been drilled and tapped for ambidextrous tip up carry. It’s not super deep carry, but fairly deep. The 0620 is neither small, thin, nor light, but the sturdy clip holds the knife securely in pocket. It carries well for what it is.

Deployment and Lockup

Like a real Emerson, the 0620 makes use of both a Wave and thumb disk. Perhaps the most notable point regarding the deployment is the detent – it’s very strong. While it’s possible to flick it open with the thumb disk, the detent is so strong that flecks of my thumbnail often depart with the blade. The wave works well, although frankly waves have never graduated beyond a novelty for me. ZT went with classic phosphor bronze washers for the 0620. Bronze washers are all well and good, but it would have been cool to see them put KVT bearings in like on the 05620.

I have said it before and I’ll say it again, ZT has really dialed in the lockup on their frame locks. Like the past few titanium framelocks from Zero Tolerance I have reviewed, this one comes with a stainless steel insert. Lockup is early (~30%), rock solid, and without stick or blade play. It’s perfect. The 0620 in particular inspires a lot of confidence. The blade slides in to place with a satisfying snap and I wouldn’t hesitate to use the 0620 for harder tasks if necessary. Blade centering is perfect.

Zero Tolerance 0620 Review – Final Thoughts

The 0620 is arguably the best “Emerson” ever. The 0620 is built better and finished better than a real Emerson. It lacks quirks like chisel edges, and a right side tip up carry only pocket clip, but it has been upgraded with carbon fiber, M390 blade steel, and a beefy titanium frame lock. Most astonishing is that the 0620 is still made in the USA and priced for about what a similar size Emerson would cost. Case in point: the Emerson Roadhouse, probably one of my favorite Emerson patterns retails for around $230. This ZT collab comes in a at $240, and is right at $200 if you opt for the less-fancy version with Elmax blade and G10 handle scale.

There is little to nothing I would change about the 0620. In a perfect world I’d mill out the titanium frame lock to try and lighten the knife, and possibly add bearings to make this indulgent piece even more over-the-top. These are minor quibbles. Sure, it is big and impractical for normal person daily carry, but so is a real Emerson.

Zero Tolerance has once again delivered a superior product: high quality materials, beautiful construction, and designed by a legend in the industry. I highly recommend the 0620 for Emerson fans and fans of big, well made folding knives.

Zero Tolerance 0620CF Emerson Tanto Knife

Made in the USA; Wave shaped opening feature; Thumb disk for manual opening
Reversible clip (left/right); Frame lock, hardened steel lockbar inserts
Steel: Carpenter CTS-204P, stonewashed and satin finish
Handle: Carbon fiber front, bead-blasted titanium back
Blade Length: 3.6 Inch (9.1 cm); Closed Length: 4.9 Inch (12.4 cm)

I recommend purchasing the ZT 0620 at Amazon and BladeHQ.

Ka-Bar Becker BK-2 Review

by Dan Jackson 22 Comments

Last Updated: July 20, 2019

Down here in Florida we don’t get a lot of seasonality. For example, I wore shorts and flip flops on Christmas. But when the air starts to turn cool I get a hankering for 2 things: cigars and fixed blade knives. I am pleased to say I have been able to indulge in both this fall, and am ready to provide a review on a quintessential camp knife: the Becker BK-2.

Buy the Ka-Bar BK-2 at BladeHQ

Buy on Amazon

Built in the USA by Ka-Bar, and designed by Renaissance man Ethan Becker, the BK-2 has been widely accepted as a go to survival / camp knife for years now. I can’t tell you why I haven’t reviewed this classic fixed blade yet. There are many knives out there I’d love to review (one day I’ll even get to the classic USMC Ka-Bar) but just haven’t found the time for. Well, scratch the BK-2 off the list. This one has been tried and tested and I’m pleased to share some thoughts with you today.

General Dimensions and Blade Details

The BK-2 has an overall length of 10-5/8″, a 5-1/4″ blade, and weighs 16 ounces. The BK-2 is a chunky knife. Pictures really don’t do it justice, as the proportions may suggest a smaller knife. I was pleasantly surprised by this, although if I were planning an ultra lightweight backpacking trek along the Appalachian trail I’d be less pleased. This strikes me as a tool for a camp site, truck, or your back yard – not something you will want to schlep for miles and miles on end.

Here is a size comparison with the ESEE-3:

The blade is a .25″ (6.35mm) thick slab of 1095 high carbon steel. For whatever reason when I ordered this knife I thought it might be interesting to compare it with my ESEE-3. It turned out to be a poor comparison, because next to my ESEE-3 the thickness of the blade is almost comical. The ESEE-3 might as well be made of aluminum foil when compared with the BK-2. Anyhow, the blade of the BK-2 is a classic drop point shape with a high flat grind and a sturdy tip. The knife has also been powdercoated. The powdercoating is heavily textured like on my ESEE blades. The coating will provide some rolling resistance when trying to cut deeply into things – at least until it gets smoothed down with use.

The BK-2 is interesting in that it can accomplish a lot of different tasks within its relatively small footprint. It’s good for batoning / splitting wood. I used it with great success to prepare a stack of wood for a couple bon fires. I was able to split logs with up to a 4″ diameter easily. You can do some carving with the knife, and I used the BK-2 to whittle up some shavings / tinder to start the fire, and to carve a few stakes for cooking.

Although it’s a little thick and clumsy in my hands for serious carving, I was able to get the job done. The BK-2 is also a decent chopper considering its size. This is a shorter knife, so naturally it won’t chop like an axe or a big fixed blade like the Junglas, but if you need to do limited chopping it will get the job done. Case in point, I needed to chunk up some large frozen sardines for a fish trap I was using – the BK-2 blew through those suckers. For these reasons the BK-2 is a natural choice for camp chores: building fires, prepping food, and odd jobs around a camp site where a sharp object might come in handy.

The only downside is that the BK-2 doesn’t particularly excel at anything. If you need a dedicated chopper, or an ultra fine carving knife, then you will want to look elsewhere. If you want a tough “do it all” knife, then the BK-2 could be a good choice.

As previously mentioned, the BK-2 comes in 1095 high carbon steel. I have wrote about this steel at length, especially over the course of reviewing an number of ESEE knives. 1095 is inexpensive and hearty. It’s easy to sharpen and holds a nice edge, especially when working with wood. It’s tough, but if you do chip it, you will be able to salvage the edge. 1095 is a good working steel, and I think it’s a great choice for this knife.

Handle and Ergonomics

The BK-2 features a spacious zytel (high density plastic) handle over it’s full steel tang. This is a very basic handle design, and it’s perfect for a workhorse knife like this. Ethan Becker apparently spent a lot of time getting this handle shape right, which is why you find it on his whole series of knives. The handle material is humble (although you can easily pick up a pair of micarta scales), but it’s lightweight, and very tough. The finish work on the handle is great. There are no sharp edges, and all of the hardware is sunk deeply into the handle. Rounding things out are an oversize lanyard hole and a generous exposed pommel that can be used for hammering / crushing things. This is a very clean and highly functional handle design. It has also been well executed.

From an ergonomic standpoint the handle of the BK2 feels as straightforward as it looks. This is a thick handle with a generous palm swell. There is plenty of room for larger hands and the absence of jimping / aggressive texture allows you to work with this tool for extended periods of time without blistering your thumb. Those wanting a little more grip could upgrade to micarta scales, or wrap the handle with athletic tape or a “ranger band” (a section of bicycle inner tube). I did not notice any hot spots while using this knife. This is a fantastic handle shape.

Sheath

The BK-2 comes complete with a plastic and nylon sheath. The sheath is simple, lightweight, and sturdy. It has excellent retention, yielding a very satisfying snapping sound when you shove the knife in place. There is no blade rattle at all, and I am not the least bit concerned about the blade ever falling out from the sheath. There is also a drain hole.

The nylon belt loop is simple and features a snap fastener for extra retention. It is fully removable with a Phillips head driver, and the plastic sheath is riveted together. The rivet holes and slots leave you with plenty of options for molle locks, tek-loks, paracord, and webbing. This is an outstanding sheath and it compliments the knife perfectly. Also, the snap fastener lies flat, so I have yet to cut into it when drawing the knife. The only creature comfort missing is that you need to take your belt off to feed it through the belt loop. I like being able to remove a belt sheath without having to take my belt off, but it’s not a deal breaker.

Becker BK-2 Review – Final Thoughts

The BK-2 is an impressive knife, especially when you consider that they are selling for right around $65.00. This is a lot of high quality tool for the money. The simplicity of the design, the quality of materials, and the extremely high level of fit and finish all make the BK-2 punch above its weight. Plus, it works. The stout geometry of the blade is excellent for processing wood, the handle is about as comfortable as they come, and the sheath is lightweight and functional. Finally, the knife itself is made in the USA (the sheath is made in Taiwan). I happen to like a USA made product, although it certainly isn’t a requirement for a favorable review.

All told, it is easy for me to see why the Ka-Bar Becker BK-2 has earned such a following and reputation. It’s simple and it works. If you are looking for an indestructible camp knife or a compact (but very stout) survival knife, then I highly recommend the BK-2.

Sale

KA-BAR Becker BK2 Campanion Fixed Blade Knife, Carbon Steel

Full tang heavy duty field knife suited for camping chores.
Made in Olean New York, U.S.A
Designed by Ethan Becker
Manufactured by KA-BAR Knives Inc.
Comes with a hard shell black nylon sheath.

I recommend purchasing the BK-2 at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

GEC #47 Viper Review

by Dan Jackson 12 Comments

Last Updated: August 5, 2019
I have recently seen a resurgence of interest in classic slipjoint knives. Maybe folks are getting tired of shelling out $200+ for the latest framelock flipper. Or maybe they like the idea of carrying something their grandpa may have carried. Who knows for sure.

Buy the GEC Viper at KnivesShipFree

Personally I know over the past couple years my carry tastes have trended toward the traditional. I still enjoy the latest and greatest, but 2 of my favorite EDC folders in recent memory have been the Victorinox Cadet and Chris Reeve Mnandi. I loved the slim utility of the Cadet, and the leather ensconced classiness of the Mnandi. They are such excellent knives for my basic daily purposes.

Then reading Tony’s review of the Indian River Jack piqued my interest in GEC knives. I view some of these GEC slip joints as almost a cross between a Cadet and Mnandi: simple tools matched with higher end materials and finishes.

So today’s review is of the GEC Viper. Or the #47 as some call it. I don’t know what it is exactly about the classic swayback slip joint pattern, but I really dig these traditional wharncliffes. The Viper is a newer model, and it’s garnered a fair amount of enthusiasm amongst the traditional knife crowd, so I figured it would be a nice model to acquire for review.

I don’t proclaim to be an expert on these traditional knives. Heck I’m not an expert on knives at all (just ask Kershaw Thomas). But I enjoy cutlery and will do my best to share my opinion of this fine folder from Great Eastern Cutlery.

General Dimensions and Blade Details

The Viper has an overall length of 6.81″, a 3″ blade, and it weighs 2.7 ounces. I must not have researched this knife very carefully because when it arrived in it’s cardboard tube I was surprised at how big it was. This is a good size slippie, especially when compared to something like a Cadet. I grew to enjoy the size of the 47. After all, it was originally designed to be a working knife. It is also fine as a suburban EDC.

The Viper comes with a beautiful 1095 carbon steel warncliff blade. Mine has a high flat grind and swedge. The edge is very fine. It’s more of a microbevel than anything. The high carbon steel has been given almost a mirror polish. It looks good and I imagine it helps cut down on rust and corrosion. 1095 is not a stainless steel, and I have had it rust on a few of my fixed blades. By giving the blade a polish there is actually less surface area for rust.

But the cool thing is that the polished 1095 will patina. On my Sod Buster JR I decided to play around with a “forced” patina by slathering the blade in mustard. With the Viper I want the patina to form naturally, so I’ve just been using the knife as I normally would, and resisting the urge to dip it in a vat of honey dijon. So far the results have been cool. I like the character it has developed over the past couple months, and look forward to seeing how things progress.

One small complaint is the amount of branding that GEC etches onto the blade. In my pictures the etching has faded, but from the factory it comes with a very overt “NORTHFIELD UN-X-LD” logo smack dab in the middle of the beautiful blade. Yeah… no thanks. Mercifully, most of the logo rubbed off after an application of Barkeeper’s Friend, a cleaning product that should consider sponsoring the website given how much I talk about it.

The 1095 isn’t just good to look at. The blade of my Viper has been given a super keen edge, and the cutting performance has been really nice. The blade easily tracks through paper, and I’ve also used the knife for mild food prep, opening packages, etc. But the other weekend I really put the knife through it’s paces. I was tasked with cutting up a large quantity of cardboard with drywall joint compound on it that wouldn’t fit into a trash can. These slip joints are usually ground thin, and the Viper is no exception. It is a keen slicer and made easy work of the cardboard. At the end of the the edge had slowed down a little, but 1095 is very easy to touch up on a strop or corner of my Spyderco Sharpmaker.

Handle, Ergonomics, and Carry

GEC offers the Viper in a variety of handle configurations. Mine is bolstered with Che Chen Rosewood scales over brass liners. This is my first knife with rosewood. It’s a beautiful wood and I have seen it on many high end guitars. I love the fine cord-like grain and deep shimmering quality of the wood when you hold it up to the light. The handle has been beautifully finished. The edges are nicely chamferred, there are no gaps in the liner or backspring, the pins and lanyard tube are meticulously sanded down, and the silver medallion inset into the handle is flawless. When you turn the knife over to examine the back of the handle there is no gap or bump in between the back spring and spine of the blade. It’s a really nice and well made handle.

In hand the Viper feels like a spacious work knife should. Don’t let the wood handles fool you: this is still a high performance tool. Back before the days of titanium, G10 and stainless steel, these were the kinds of knives folks used every day. Working with the Viper you can understand why these kinds of handles have stood the test of time. They are basic and comfortable. You can definitely whittle some sticks, cut cardboard, or handle most other daily tasks with ease.

The Viper is without a pocket clip, but it came with a leather slip sheath. I enjoyed using a slip sheath with my Mnandi, and use a slip sheath with my Fantoni Dweller as well. This sheath is wider and thicker than I’m used to, but it’s sturdy and feels good in the pocket. I like this kind of carry – especially when working in an office. If the sheath is too bulky you could always throw the knife directly into your pocket.

Deployment and Lockup

I should probably change this section to “Walk and Talk” to fall more in line with the idiosyncrasies of traditional folders. After all, this is a slip joint with a nail nick. The knife doesn’t “deploy” and there is no lock up. The nail nick is easy to get at, and the backspring on the slip joint is surprisingly strong. This is a purposeful two handed opening knife. There is a dedicated half stop, and the backspring is almost flush at the half stop.

When closing the knife you need to use some level of care due to the strong back spring. There is a half stop, but if you aren’t careful there is still room for the meat of your finger to get pinched in between the ricasso and handle. The slip joint is sturdy and reassuring, and inspired enough confidence for me to take on tougher jobs. The spring itself is tempered high carbon steel. Still, you need to use some care when working with a knife like this. It’s not a locking folder, and it sure as heck isn’t a fixed blade. Make sure you are using the right tool for the job.

GEC Viper Review – Final Thoughts

The Viper has been a wonderful introduction to higher end US made slip joint knives. I really like the look of single bladed slip joints, and traditional wharnies, so it was easy to pick this one out of the GEC lineup when thinking of my first knife.

That said, I was still surprised at how much I have enjoyed the 47. This is a larger folder, but it is still innocuous enough to bring to work. It carries well, cuts cleanly, and is satisfying to open and use. The materials are great, the fit and finish are on point, and the price is reasonable. The knife is also made in the USA. At the end of the day I have an extremely hard time finding any kind of fault with the Viper. I could do without the lanyard hole, but I see why they included it. I am also not a huge fan of the amount of branding GEC etched onto the blade. Thankfully, that faded with cleaning. Beyond that I have no complaints.

I highly recommend the Viper if you are looking for a traditional folder or just an excellent EDC.

GEC Viper – From $82.36
From: KnivesShipFree

I recommend purchasing the Viper at KniveShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.