Knives By Purpose

Kershaw Leek Review

Last Updated: December 1, 2019
The Kershaw Leek is a popular EDC knife designed by legendary custom knife maker Ken Onion. Between his designs for Zero Tolerance Knives, Kershaw, and CRKT, Ken’s work has received a lot of attention on this site. This is for good reason as he is highly regarded as a knife designer.

Buy the Kershaw Leek at BladeHQ

Buy on Amazon

The Kershaw Leek is firmly planted in the Every Day Carry (EDC) category. In fact, this is something of a gold standard for EDC. It comes in a great size and is a durable design, perfect for daily carry. Additionally, the Leek has been offered in wide variety of colors and finishes, including some limited edition versions over the years. This makes the Leek a collectable knife. For these reasons the Leek has become a favorite of both hardcore enthusiasts and casual pocketknife users.

General Dimensions and Blade Details

The Leek has an overall length of 7″, a 3″ blade, weighs 3 about ounces, and is made in America. Like the vegetable it was named after, this is a sleek and slim design. This lightweight folder is aimed directly at the Every Day Carry (EDC) market.

Here is a size comparison with the Leek in between my Kershaw Skyline and Kershaw Chive:

The Kershaw Leek features a modified wharncliffe style blade. The Leek’s mostly flat edge is almost completely devoid of belly. This makes the knife well suited for tasks that involve the tip of the blade. The Leek’s blade comes to a very fine tip and it makes the knife great for piercing tasks and detail work. Stuff like scoring boxes and clipping coupons is a breeze with a wharncliffe. It’s also easy to sharpen a wharncliffe blade like this relative to a knife with a curved edge. Another advantage of the wharncliffe design is that pressure is applied uniformly to the edge. This allows you to place a good amount of leverage into a cut.

On the flip side, folks may not like the wharncliffe blade because it has no “belly” or forward curvature to the blade. Belly is especially useful when preparing food (think, rocking a kitchen knife back and forth) or skinning game without piercing the hide. And that tip, while very precises, is somewhat fragile. You don’t want to drop any knife, or pry with any knife, but the tip of the Leek is especially delicate.

Another argument against the wharncliffe is that it looks funny. It lacks the traditional elegance of something like the Loveless Drop Point Hunter. This wharncliffe blade may take some getting used to if you come from a traditional hunting knife background, but that’s part of what folks find endearing about Ken Onion’s work.

Here is another size comparison with the Spyderco Endura and the Delica 4:

The Leek is a perennial in Kershaw’s catalog. The design is at least 10 years old, and probably is closer to 20. Accordingly, Kershaw has offered the knife in a number of steels over the years. But if you are going to buy one new one today, it will most likely come in 14C28N.

14C28N is developed by Sandvik, a Swedish company that made the steel exclusively for KAI USA/Kershaw Knives. 14C28N is a high quality stainless steel and is a choice for the price. I have found that 14C28N is a practical steel. It takes a fine edge easily, holds that edge for a decent amount of work, and is easy to sharpen. It also has good stain resistance. I prefer it over 8Cr13MoV and Aus8, the Asian budget steels, as it holds an edge longer. I also like it more than D2, a semi-stainless steel that can be found at similar price point as 14C28N, because 14C28N is easier to sharpen and isn’t as prone to staining.

It’s an excellent all round steel, and is appropriate at this price point.

Handle, Ergonomics, and Pocket Clip

The handle of the Leek will come in either full stainless steel with a frame lock (shown here) or aluminum scales with a liner lock. Both models feel good in the hand for a smaller knife. The solid steel handled version has a nice heft to it. Both handle types are constructed with screws rather than pins, so if you need to disassemble the knife, then it can easily done with a T6 torx bit.

Fit and finish on this handle is excellent. All the parts line up. The finish work is good with no tooling marks or anything like that. It’s simple design, but Kershaw has it dialed in.

This is a comfortable little knife that is geared towards light to medium use. I found I was able to get a 4 finger grip on the knife without much issue and my thumb found the thumb ramp easily. There is a little bit of jimping on the thumb ramp. The jimping isn’t supper aggressive, but it does grab the skin a little. Otherwise, there isn’t much of a “traction plan” on this knife, so you won’t want to skin a deer with it or take it into the shower, but for a small knife I liked the ergos.

The pocket clip of the Kershaw Leek is pretty good. Ken Onion is known for designing some pretty “out there” pocket clips, but the clip on the Leek is relatively normal looking. It is long, and offers good spring retention. It is reversible for tip up or tip down carry, but it is not ambidextrous.

The clip rides pretty low if you mount it tip down, but for tip up carry a good half inch of the handle sticks out. That said, this is a small and light knife, it still carries well and is unlikely to draw much attention. Here is a shot of the Leek in the pocket:

Deployment and Lockup

The Leek is an assisted opening knife, which means you start opening it manually, but then a spring kicks in to flip the blade open the rest of the way. Ken Onion designed the assisted opening system, which Kershaw calls the “SpeedSafe” deployment system. This assisted open technology is robust, and is used on a lot of Kershaw and Zero Tolerance knives. The Leek deploys quickly with a slight amount of pressure on the thumb studs or flipper. The knife opens with a satisfying “snap”, even after thousands of flips. Having owned a number of SpeedSafe knives over the years I can vouch for it’s reliability. It’s a good assisted opening mechanism.

There is a second optional safety lock to keep the knife from opening accidentally. Out of the box, this secondary safety is loose, and will invariably move around when you don’t want it to. Thankfully, this safety can be tightened down, or even removed completely if you decide not to use it.

Additionally, for those that don’t care for the SpeedSafe, it’s possible take the spring out and use this as a non-assisted opening knife. There is a ball bearing detent inside on the lockbar, so the knife still functions de-assisted. But primarily the Leek was designed as an assisted opening knife.

The blade on my knife locks open with a stainless steel frame lock. The lock is solid, and without blade play in any direction. It should be more than adequate for the typical EDC chores you will put this knife up to, like breaking down boxes and opening mail. My Leek has seen substantial use over the years, and the lock still engages early, and securely without blade play. When it’s time to release the lock there is no stick.

The Leek was designed to be a “1 hand” knife, which means you can open and close this knife with one hand. I’m left handed and found it easy to both open and close this knife with one hand. For a small EDC knife this is handy, and it’s almost a requirement for my EDC knives.

Here is a parting size comparison with another EDC classic, the Benchmade Mini Griptilian:

Kershaw Leek Review – Final Thoughts

The Kershaw Leek has most of what I look for in a small EDC knife. It’s light, slim, sharp, and fast. I like the solid lockup and quality blade steel. The pocket clip is secure, and the knife feels good in the hand. The fact that this Kershaw is made in the USA certainly does not hurt either. I think the quality is better on Kershaw’s USA made knives than their imported blades.

The biggest potential issues with the Leek are that there is not much texture on the handle, and the tip is thin and can break if you are not careful with the knife. It’s a little “fiddly” and is more of a light duty knife. It will accomplish most typical urban or suburban EDC chores, but if you have harder use in mind I’d look elsewhere. Also, the secondary lock is annoying unless you tighten it down or remove it.

However, for a little EDC blade I think these are minor issues. You just have to keep your intended use in mind. The sleek design makes this something of a gentleman’s folder, and I could see this knife doing just as well in an office as it would in a more demanding environment.

Perhaps the greatest test is the test of time. I originally wrote this review back in 2011. Back then, there were a lot less knife manufacturers and knives to choose from. As I update this review in late 2019, the Leek is still relevant. Kershaw still makes it, and it still sells well. My review sample has held up well over the years. It’s a high quality knife and is designed to last. And at well under $50, the Leek is an affordable USA made option. I’d say it has aged well and passes with flying colors.

Personally, I prefer the Kershaw Skyline over the Leek, but if you like the design then I think you will be pleased with the build quality and practicality of the Leek. Much like the Skyline, this is a modern classic for good reason. Recommended.

Kershaw Leek Pocket Knife, 3" 14C28N Stainless Steel Drop Point Blade, Spring Assisted Knife, Folding EDC

KERSHAW LEEK POCKET KNIFE: The Kershaw Leek might just be your new favorite EDC. Not too big, not too small, the 3-inch blade and slim design make it capable of fulfilling a wide range of cutting tasks. Made in the USA.
DROP POINT PLAIN EDGE BLADE: Made from high-performance Sandvik 14C28N stainless steel, the blade resharpens easily and holds its edge. The bead-blasted finish provides a clean, matte look.
410 STAINLESS STEEL HANDLE: The corrosion-resistant, stainless-steel handle is contoured for a comfortable grip while in use. Silver, bead-blasted finish. Includes reversible pocketclip for right, tip-up/down carry.
DESIGNED WITH SAFETY IN MIND: Equipped with Kershaw’s SpeedSafe assisted opening for easy one-handed release with flipper. Frame lock secures blade open while in use and Tip-lock slider keeps blade locked closed when folded.
SIZE SPECIFICATIONS: Blade Length: 3in. Closed Length: 4in. Overall Length: 7in. Weighing in at 3oz. Backed by Kershaw’s Limited Lifetime Warranty.

I recommend purchasing the Kershaw Leek at Amazon.com or BladeHQ.Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Gayle Bradley C134CF Review

by Dan Jackson 13 Comments

Last Updated: August 26, 2019
The Spyderco Gayle Bradley (C134CF) is one of those knives that was built for use and abuse, but is so nice I wasn’t sure if I could bring myself to really scuff it up. I guess the only reasonable answer is to buy two of these, one for carry and the other to keep pristine in the bowels of the collection.

Buy the Spyderco Gayle Bradley at BladeHQ

Buy on Amazon

The knife was named after its designer, Texas custom knifemaker Gayle Bradley. Mr. Bradley has been making custom knives out of his shop in Weatherford, Texas for over 22 years. He also has the distinguishment of winning BladeSports International Cutting competition in 2008 (he had the most points for the 2008 season).

The Spyderco C134CF is Bradley’s first production knife collaboration. The knife is made from heavy duty M4 steel – the same steel Mr. Bradley uses in his competition cutting knives. With Mr/ Bradley’s credentials and the use of such a high end steel you know that this knife has the potential to go the distance.

General Dimensions and Blade Steel

The Gayle Bradley has an overall length of 8.078″, a 3.438″ blade, weighs 5.5 ounces, and is made in Taiwan. This is a large and thick folder with graceful lines and a rock solid feel. The knife is manufactured in Spyderco’s Taichung Taiwan factory. Sure, I’d love to see this knife made in Golden Colorado, but I can’t deny that some of Spyderco’s best knives, from a fit and finish perspective, are currently coming out of Spyderco’s Taiwanese factory.

The Gayle Bradley has extremely high build quality – it’s difficult to describe on paper but the moment you handle this knife it all comes together. The dimensions and feel of this knife make it slightly large and heavy for EDC, although it would certainly work in that role. This knife is a work horse and it’s intended use is heavy cutting tasks.

The blade is a modified drop point with a high hollow grind and a sloping swedge. The blade has been given a beautiful satin finish that gleams in the light. This blade is a thing of beauty from any angle. Blade thickness is right at 3mm. It is thick enough for tough tasks, but is still ground thin enough to be a capable slicer. This blade is almost all edge and the long curving belly provides tons of room for cutting.

The blade is made from Crucible CPM-M4 steel. M4 is a high quality tool steel and Crucible’s version uses their Crucible Particle Metallurgy (CPM) manufacturing process to enhance the toughness and ensure the M4 has a consistent grain. What this means is that the knife will really hold an edge and is capable of getting extremely sharp (sharp enough to win Mr. Bradley a couple world records in cutting competitions). This is not a stainless steel so you will need to take care to keep the blade dry and (preferably) oiled.

Handle, Ergonomics and Pocket Clip

The knife has a flow through, pillar construction handle made of textured carbon fiber and full-length steel liners. The liners have been milled out in an attempt to reduce the weight, but this is still a substantial folder. The handle is bolted together (rather than pinned) which is great if you ever have the desire to take this knife apart (perhaps you want to try and mill it out yourself). If you are thinking of milling the liners out I want to wish you good luck because these are some of the thickest liners I have seen. This is a very heavy duty handle.

The carbon fiber Spyderco selected is the textured version used on the Spyderco Sage (review coming soon). This has a “weave” like texture that provides decent grip considering it’s carbon fiber, a traditionally smooth material. There is light jimping on the lock bar and on the thumb ramp, which combined with the finger choil and flowing handle make for a very comfortable and ergonomic grip. This all helps to make the knife a great work knife. For those that intend to use this knife heavily I think the handle design and ergonomics will be great for that.

The pocket clip is also quite interesting. It has a smokey gray black finish that almost looks anodized although the clip is definitely steel. It is a unique looking finish that I really like and is another detail that makes this a special knife. I also like how the clip can be mounted on all four corners of the knife. The knife rides low in the pocket and the blackened clip won’t attract much attention (unless you are around a bunch of knife knuts).

Deployment and Lock

The Gayle Bradley uses an extra large (1/2″ diameter) Spyder hole and phosphor bronze bushings for deployment. This knife is very easy to open and it is super smooth. The deployment feels just as good as the rest of the knife which is great news indeed. The ultra thick liner lock sits snugly on the blade. This knife is constructed very solidly and with that extra thick liner lock I think this knife is capable of taking some abuse. Really the lock-up and deployment are both very impressive; it’s hard to put it into words.

Spyderco Gayle Bradley Review – Final Thoughts

Mr. Bradley said that he was very pleased with the way the knife came out, and he gave it his full endorsement. I have to say, the knife has my endorsement too. The beautiful design, the high quality materials and the excellent construction make this a great knife in my book. It also is a great value. The knife has a $225 MSRP but I am seeing it retail for right around $130. At that price I think it is a steal. Of course, this knife isn’t for every one. The weight may be an issue, and it may be on the large size as well, but overall I think this is a great knife and I look forward to more Gayle Bradley collaborations.

Spyderco Gayle Bradley Folder Carbon Fiber PlainEdge Knife

Made using the highest quality materials
Tested for quality and durability
The most trusted name in you cutlery needs
Carbon fiber handle. Screw-together construction.
4-way hourglass steel clip. Full-length internal liners.

I recommend purchasing the Gayle Bradley at Amazon or BladeHQ. Thanks for reading.

ESEE Izula II Review

by Dan Jackson 10 Comments

Last Updated: September 22, 2018

The ESEE Izula is one of the most iconic small fixed blade knives of our time. Named after an infamous South American Ant, the Izula was designed to be a small, sharp, and incredibly tough blade for outdoor and everyday use. In practice, the knife is just that. The simple design and solid build catapulted the Izula into fixed blade fame in very short order. More recently ESEE released the Izula II, a version of the knife with a slightly longer handle. Having larger hands I went with the Izula II, but 95% of this review applies just as well to the original Izula.

Buy the ESEE Izula II at BladeHQ

Buy on Amazon

As for the intended use (and my overall perspective of this knife for purposes of the review) I have carried my Izula II extensively as both a suburban EDC and as an outdoor knife. The Izula is a great size for the pocket and is something I have no issue pairing with a larger fixed blade, a folder, or just carrying it by itself.

General Dimensions and Blade Specifics

The main differences between the Izula and Izula II are the handle length, weight, the color selection, and the fact that the Izula II comes standard with micarta handle scales while the scales are optional with the original Izula. The handle of the Izula II is exactly half an inch longer than the Izula, giving the knives a total length of 6.75″ and 6.25″ respectively. Both have a blade length of 2.75″. The Izula II has a weight of 3.2 ounces and the Izula has a weight of 2.0 ounces. Both knives are made in the USA.

Both knives are forged from a single piece of 1095 High Carbon steel (the same steel used in all ESEE knives). 1095 is a very tough tool steel that is great for outdoor and survival knives because it is very tough (less likely to chip or break), sharpens easily, and takes a very nice edge. The biggest disadvantage to 1095 is that it is not a stainless steel and will rust if you aren’t careful. In order to help combat rust ESEE coats the knives in a textured powder coat. 1095 is a proven steel that I have written at length about, and Rowen (the manufacturer for ESEE) knows how to heat treat this steel (to 57 HRC).

The Izula and Izula II share the same drop point blade shape. This is a great shape for all around utility, with plenty of belly, a stout tip, and a full flat grind. What impresses me the most is how thick the blade is at .156″ (~4mm). The thick steel holds up well to batoning, tip torture tests, and everything else I could throw at it. “Indestructible” is a word that readily comes to mind when I ponder the Izula II’s blade. Of course the thick geometry means that this won’t be your best slicer – it’s no chef’s knife for sure. But the Izula does a good job cutting and will make quick work of most EDC tasks, camp chores, basic food prep, and carving.

Handle and Ergonomics

The regular Izula comes “naked” without any kind of handle material. The skeletonized 1095 is perfect for wrapping paracord around it, or you may opt for the canvas micarta handle scales ESEE sells separately (they can be had for around $15). The scales beef up the knife a bit and it provides a great feel to the knife. Even without any kind of handle scales the Izula is a reasonably comfortable knife. A paracord wrap is an attractive and inexpensive option that will add additional comfort to the handle and also allow you to carry a couple extra feet of cord on you with the knife.

The Izula II comes with canvas micarta scales that feel good and wear well. They are attached to the handle with two sets of allen bolts – making them fully removable. Having used the knife hard in the outdoors I do wish the bolts were flathead bolts. That would make them much easier to service with something like a multi-tool, coin, or even the spine of another knife. That is probably my biggest complaint with the Izula II, and I generally feel they did a great job with this handle. The micarta is lightly textured, and it provides a good comfortable grip in wet or dry conditions. One thing about canvas micarta is that it will soak up sweat, oils and moisture and it will darken over time. I happen to think this looks cool and adds a little character to the knife.

As for overall ergonomics, you will want the Izula II if you have larger hands. I take a large glove and the Izula II fits me perfectly. In my opinion anything less would feel cramped. I also really like having micarta scales on this knife, it fills the hand well and makes for an extremely comfortable tool. Both knives have a nice spot for your index finger and functional jimping on the thumb ramp. It gives you good control over the knife and feels very natural. If you are the kind of person with smaller hands, in need of a neck knife, or want to take a crack at making your own handle scales then the original Izula might be a better choice.

Sheath

Both knives come with black injection molded plastic sheathes. These are lightweight sheathes made of a dense polymer that is very durable. Blade retention with these sheathes is excellent – the knife locks into the sheath with a very satisfying audible “snap.” The fit is nice and tight (no rattle), but it is not impossible to pop the knife out with your thumb. This is about perfect in my book because the knife is secure but it is also easy to get at when you need it.

The sheath on the Izula (and Izula II) allows for multiple mounting options. The sheath has 2 smaller eyelets for paracord, a slot for belts or webbing, and a large eyelet near the tip of the sheath for a lanyard. My favorite way to carry this knife is in my pocket. I’ll sometimes loop a largish (18″ or so) lanyard through the large eyelet of the sheath and secure the other end to my belt. It makes retrieval of the knife easier and you don’t have to worry about misplacing your sheath.

All in all I am extremely pleased with the versatile and durable sheath that comes with the Izula / Izula II. This is easily one of my favorite small fixed blade sheaths.

ESEE Izula II Review – Final Thoughts

The Izula II is a great little knife. The simple design and sturdy construction make for a very versatile tool that works just as well around the house as it does out on the trail. If you need a small no-nonsense utility knife then I would say to look no further. The sheath is excellent, the handle is comfortable, and the 4mm blade stock holds up to even the toughest tasks.

The Izula goes for around $55 for the knife and the sheath ($16 more for handle scales) while the Izula II can be had for around $65. I’d say these are fair prices. Remember that these knives are made in America and that ESEE has a no questions asked lifetime warranty so if anything happens to the knife (besides rust) ESEE will replace it. Some will argue these knives are expensive. I think in this case you get what you pay for.

Finally, if I could go back in time and pick between the Izula and Izula II again I would stick with my Izula II. I like the standard micarta handle scales, and greatly appreciate the slightly larger handle of the Izula II. That said, if you are looking to make your own handle scales, have smaller hands, or want to keep the weight down then the regular Izula is probably your best option.

Sale

ESEE Knives Izula-II Fixed Blade Knife, Micarta Handle, Molded Sheath, Clip Plate (Black)

Overall Length: 6.75″
Blade Length: 2.63″
Steel: 1095 High Carbon, 55-57 Rc.
Weight: 3.2 Oz. w/o Sheath
Molded Sheath & Clip Plate

I recommend purchasing the Izula II at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance 0550 and 0551 Review

by Dan Jackson 10 Comments

Last Updated: August 3, 2019
Today I am taking a look at the Zero Tolerance 0550, a special collaboration between ZT and Rick Hinderer of Hinderer Knives. Rick has been making knives and self defense weapons for over 20 years. He started out specializing in Damascus and art knives, but over the past decade has made a transition into heavy use knives. These knives are extremely popular with military and law enforcement due to their uncompromising quality and extreme hard use durability. Naturally, knife collectors, enthusiasts and general consumers also became very interested in these knives and they have become a benchmark for quality among the knife community.

No products found.

Mr. Hinderer is also known for his various knife innovations, the most famous being his “Lockbar Stabilizer,” which is used on his titanium frame-lock knives to prevent over-extension of the frame-lock when you are disengaging the lock. Over the years Mr. Hinderer has been involved in several other collaborations with Gerber and Benchmade, designing various production knives.

The Rick Hinderer and Zero Tolerance Collaboration

What excites me about his latest collaboration with Zero Tolerance, is that ZT is really taking Hinderer’s hard use philosophies to heart by combining premium materials with USA craftsmanship to build the 0550 series of knives. The end result appears to be a knife with a lot of the qualities people lust over in Hinderer’s very rare and expensive custom and semi-custom knives at a price that many collectors can afford.

The 0550 series currently contains 2 knives. The 0550 is the regular production version of the knife and the 0551 (shown here) is a special edition limited to only 1000 pieces. The 0551 differs from the 0550 in that it uses a different type of steel and has a special pattern on the G10 handle scale. Rumor has it that ZT may make more of the 0551.

General Dimensions and Blade Details

The ZT 0551 has a blade length of 3.5″, a closed length of 4.5″, a blade thickness of 0.156″ and a weight of 5.8 ounces. I know for some that the words “5.8 ounces” will be a deal breaker, and I can understand that if weight is a concern, but that doesn’t stop this from being an excellent knife if you enjoy heavier blades. As for purpose here, the ZT 0550 is a hard use tool all the way. Every aspect of this knife has been overbuilt and the Hinderer pedigree shines here at every angle.

The on blade the 0550 is a modified drop point made from thick stock and features a high flat grind. If you run your fingers behind the edge you can feel how thick this knife is. The blade steel actually thickens out as you reach the tip – it’s pretty crazy. I never recommend prying with a knife, but if you had to use a knife for prying, I think the 0550 would hold up better than the average knife. The caveat to this kind of design is that the knife is not the best slicer. That’s the trade off.

The 0550 features CPM S35VN. S35VN was designed to be a successor to the wildly popular S30V blade steel. The knife community has met S35VN with some skepticism so I took it upon myself to really cut with this knife, and I sharpened the blade a couple times. I feel like S35VN is really good stuff. It sharpened easily, held a nice edge and I had no issues with rust or corrosion. I also feel like the steel exhibited good toughness, as the blade never chipped out or warped in my use. Of course, this is just one knife (with a very thick blade) and I am only one guy. It’s going to take a lot more experience to fully appreciate S35VN. If my opinion ever changes, I’ll be sure to update the review. For the time being I’ll continue to use and enjoy my 0550.

Handle, Ergonomics and Pocket Clip

The 0550 has a handle made of G10, stainless steel, and titanium. The non-locking side has a thick piece of G10 over a painstakingly milled out stainless steel liner. The locking side is made of a solid slab of 6AL4V titanium and features a Hinderer lockbar stabilizer to prevent over-extension of the lock. The knife has a flow-through design with thick pillars securing the two handle pieces together. Hinderer also makes aftermarket G10 scales for both the 0551 and 0550 in pretty much any color you want. This is a really cool way to add some style and make this knife your own.

The 0550 has solid ergonomics and the knife works in a variety of grips. Starting things off, we have a nice finger choil and a thumb ramp with coarse, but very purposeful jimping. This gives you great control over the blade and really fits my fingers well. The handle itself is thick and it fills the hand nicely. It’s a boxy handle, but the corners have been slightly rounded for comfort. I find the 0550 to feel very nice in both forward and reverse grips and I’m pleased with the amount of traction this design offers.

The pocket clip is a piece of steel with the Zero Tolerance logo lightly milled onto it. Like many other Zero Tolerance knives, this is the same clip found on the Kershaw Skyline. For some that might be a turn off, but I’m pleased with the great retention and deep carry of this design. I also am a huge fan of how ZT drilled and tapped this handle for 4 corners carry.

Deployment and Lockup

The 0550 features chunky ambidextrous thumb studs. There is plenty of room to get your thumb behind it and give the knife a nice flick. ZT selected thick phosphor bronze washers, and the knife is extremely smooth. This is a heavy blade, and it takes a little effort to get it moving with any speed, but I’ve found deployment on the 0550 to be incredibly smooth and reliable.

The 0550 features an ultra thick titanium frame lock. This is one of the thickest pieces of titanium I have ever seen used for a lock. The lock engaged early and provides a solid lockup. I am extremely impressed not only by the thickness of the lock, but by how well the lock has been designed. I typically don’t flick open framelock knives, but the 0550 seems to like it. Having flicked the knife open knife hundreds of times the lock still engages as early as it ever did. To me this is a great achievement and is a testament to how well this knife has been made.

The Hinderer lockbar stabilizer ensures that you will not over-extend the lock bar as you disengage it. This will prolong the life of your lock and is a really nice feature to see. In my video I said that the stabilizer was the cherry on top of this delicious ice cream sundae of a knife. I don’t typically have a sweet tooth, but I still stand by that statement.

Zero Tolerance 0550 Review – Final Thoughts

The ZT 0550 is an absolute home run of a knife. I love pretty much everything about this knife. The materials are great, the level of fit and finish is phenomenal, it features an awesome Rick Hinderer design, outstanding options for carry, excellent ergonomics and the best frame lock I have ever seen in a production blade. Given everything you get, it’s difficult to believe that the 0550 retails for only $200.

For some the only reasonable criticism here is the weight (and perhaps that the blade is so thick it doesn’t slice particularly well). But fans of big knives, fans of hard use knives, and fans of big hard use knives made in America will absolutely love this offering from Zero Tolerance. I am walking away extremely impressed by this knife and can easily recommend it if big tactical folders are your thing.

Zero Tolerance has truly raised the bar with this one providing a great knife and outstanding value to the consumer.

Zero Tolerance 0550 – $199.95
Retail Price: $250.00
You Save: $50.05
from: BladeHQ

I recommend purchasing the ZT0550 from BladeHQ or Amazon.com.

Benchmade Nimravus 140BK Review

by Dan Jackson Leave a Comment

Last Updated: July 26, 2019

The Benchmade Nimravus is one of Benchmade’s original fixed blade designs. It has stood the test of time and remains popular to this day. A “Nimravus” is an ancient cat with large teeth. I’d say that’s fitting when you consider this blade’s profile.

Buy the Benchmade Nimravus at BladeHQ

Buy on Amazon

Benchmade has offered the Nimravus in a number of blade steels and colors over the years. Today I’m checking out a 154CM version that has been blacked out completely.

General Dimensions and Blade Characteristics

The Nimravus has a blade length of 4.5″, a total length of 9.45″, weighs 6.2 ounces, and is made in America. This is a lightweight tactical fixed blade. Generally, a tactical fixed blade is going to be primarily used as a utility knife, but it needs to be able to serve in a defensive role as well. The Nimravus has the ability to flex into both of those roles. The 4.5″ blade gives you plenty of options. This knife will get plenty of work done, but can also be used as a martial blade if necessary.

The Nimravus comes both tanto and drop point versions, and you can get it with a plain edge or partially serrated. I opted for the drop point with partial serrations. Partial serrations can be handy for cutting rope and other fibrous materials, and it doesn’t dull as quickly as a plain edge, which can be helpful for use in the field when you may not have ready access to a knife sharpener.

My drop point blade has been given a high flat grind. The blade gets thin behind the edge, and this knife can assist with food prep, baton smaller pieces of wood, and take care of the myriad of small tasks that crop up in the out-of-doors. There is a partial swedge, that is mostly for decoration. The tip is fine and must be used carefully.

My blade has been coated in BK1, Benchmade’s proprietary poly-ceramic coating. BK1 is tough stuff, but it does show wear. Personally, I’m not a big fan of blade coatings, and would prefer to see Benchmade offer this knife in a stonewashed or satin finish. Especially since this knife is offered in stainless steel.

Speaking of stainless steel, my Nimravus came in 154CM. 154CM is the same workhorse steel that Benchmade uses on their Griptilian. It’s an excellent all-round steel, exhibiting good edge retention, corrosion resistance, and easy sharpening. This is a proven steel that is a good choice for this smaller fixed blade knife.

Handle and Ergonomics

The Nimravus is a full tang knife that has two hard-anodized aluminum handle scales. Handle construction is simple and neat. The scales are fastened to the handle with large torx hardware. Everything has been meticulously finished. The edges of the handle are chamferred and sit slightly proud of the aluminum scales. The scales themselves are deeply textured for traction.

This is a very grippy knife. The handle scales provide excellent grip, there is a large finger choil to keep the knife securely in hand, and there is a row of toothy jimping. I find the jimping too toothy without gloves. It digs into the pad of your thumb, and can be uncomfortable. Thankfully, the aluminum handles have been milled so you can hold the knife in a pinch grip. I find that to be more comfortable.

The balance point of the knife is right behind the finger choil. It gives the knife a neutral feel and hand and helps the Nimravus feel fast and balanced.

Rounding things out is a metal pommel with a hole for a lanyard. While it isn’t designed to be a glass breaker per se, this pommel could be used to break some glass or as an impact device.

Sheath

The Nimravus a sturdy nylon sheath with a kydex insert. The sheath offers several methods of attachment and you can remove various straps and connections to modify the knife as you like, however, I much prefer the optional kydex (hard plastic) sheath.

As far as nylon sheathes go this one is top notch, but the durability of the kydex sheath is hard to beat. Keep in mind that it’s a $40 option, which may seem pricey but I assure you that it is money well spent if you are going to seriously carry this knife. In a perfect world I’d like to see this come with the knife.

A final thing to note about the nylon sheath is that it comes MOLLE compatible. For those that use MOLLE (a system of attaching gear to yourself and your equipment) this is a nice feature that you don’t find with a lot of sheathes and it is worth taking a moment to mention.

Benchmade Nimravus Review – Final Thoughts

The Nimravus is a lightweight and capable knife that could fit the role of a large EDC or tactical blade. One thing that I may not have communicated through the review is the quality and level of fit and finish. This knife is well built. The blade is thinly ground, the balance is good, and the finish is everything you would expect from Benchmade. This is a durable blade and a convenient size to get real work done.

Here is the Nimravus next to my Ka-Bar BK-16, a more inexpensive tactical fixed blade:

It is lightweight enough to be a backup blade, but it’s got enough length on it that you could use it as a primary field knife or tactical option. For those seeking a piece of Benchmade history, or simply a good fixed blade knife, the Nimravus is well worth considering.

No products found.

If you would like to buy a Benchmade Nimravus, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel AK-47 Review

by Dan Jackson 6 Comments

Last Updated: February 22, 2018
The AK-47 rifle was designed by Russian Gunsmith Mikhail Kalashnikov in 1946. These guns were designed to be simple and rugged, and for these reasons the AK-47 design has enjoyed much popularity for over 60 years. The Cold Steel AK-47 was designed with similar intentions. The original Cold Steel AKs were solid knives, but they received some severe criticism about their weight and durability.

Buy the Cold Steel AK-47 at BladeHQ

Buy on Amazon

A second generation of the knife has appeared on the scene and both AKs has received a complete overhaul with a new beefier Triad lock, a slimmed down handle and a solid aluminum glass breaker / striker to replace the old pommel made of Grivory, a type of engineered plastic from Switzerland, that was the subject of many complaints. It seems that Cold Steel has given us an entirely new knife so I am interested to see how the second generation of measures up with a Cold Steel AK-47 review.

General Dimensions and Blade Details

The full size Cold Steel AK-47 has an overall length of 9″, features a 3.5″ blade, and weighs 5.5 ounces. This is a large folder, suitable for work as a tough EDC knife and perhaps suitable in more tactical / self defense roles.

The AK-47 has a large clip point blade. What I find especially attractive about this knife is that it is pretty much all belly. From the choil to the tip, the blade arcs out providing tons of practical space to get work done. Speaking of tips, the tip is reinforced with a swedge, and allows for excellent penetration while still being fairly durable. Furthermore, the inclusion of a high hollow grind makes for a great slicer. This is a well thought out and functional blade design, that works well in a wide variety of situations.

Originally, this knife was offered in AUS-8 steel with a teflon blade coating. That’s the version shown in the pictures. In 2016 Cold Steel upgraded their entire line, and now their premium blades all come in CTS-XHP. The previously teflon coated blades now come with a black DLC coating. While this increased the price of the knives, the upgrades are well worth it. CTS-XHP is a superior steel, and DLC coatings are the best in the business. That, combined with this knife’s excellent deep hollow grind, make it a capable slicer.

Handle, Ergonomics and Pocket Clip

The handle on the AK-47 is completely linerless, and features thick slabs of G10 that bolt into an aluminum backspacer. Some people (myself included) would immediately question the strength and durability of a linerless folding knife handle. I can assure you that the handle design is extremely solid. These knives were made to take a ton of abuse, and I can’t make the G10 budge a millimeter, even when pushing on the handle with all my strength. Everything is very well finished, with all the corners rounded off and the parts lining up perfectly.

The AK-47 feels great in hand. The knife was designed to provide an extremely secure grip, and to maximize reach. Unlike say, the American Lawman, you are not going to be able to easily choke up on this handle, but if you need to use the knife for a lot of slashing, it’s going to be almost impossible to take it out of your hand. The G10 is exceptionally grippy, but I will say that the thumb ramp is pretty smooth. The design couple probably benefit from some better jimping. However, because of the way the handle is shaped, I really don’t see the absence of jimping as a huge deal. It is going to be nearly impossible to slide forward on this knife.

The it is also worth mentioning that the AK-47 features an exaggerated pommel. This time the pommel is made of 6061 aluminum and is a big step up from the old plastic version. Not only is it light and strong, but it serves as a solid anchor point for the handle screws. This is what allows the knife to be linerless and so lightweight. Naturally, this pommel could be used as a glass breaker, a hammer, or some sort of non-lethal defensive option.

Rounding out our handle is the pocket clip. Cold Steel actually gives you two pocket clips; one for either side. The position of clip doesn’t allow for deep carry, and is instead optimized for easy of deployment. Also, this knife only allows for tip up carry. I have found retention to be very good with these clips, with the only downside being that the strong clip and rough G10 can tear up your pockets a little. Despite these perceived negatives I have found this to be a very sturdy and reliable clip. The AK actually carries really well for its size and the strong clip keeps the knife in place.

Deployment and Lock

To open the knife, the AK-47 utilizes a thumb plate and phosphor bronze washers. The thumb plate allows for ambidextrous opening of the knife. It is possible to flick this knife open, but it takes some skill and wrist action, because the backspring for the lock requires a good amount of force to overcome. If you really want to open this knife fast your best bet is to use the thumb ramp as a wave feature. By far this is the easiest way to quickly and consistently open the knife.

Now arguably the biggest change between this AK-47 and the old version is the brand new Triad lock. The Triad lock is a type of modified lock back designed by Andrew Demko. It includes beefier hardware and a stop pin, so force gets placed on the pin instead of the locking mechanism. In practice the lock on this knife is extremely strong and is capable of withstanding repeated spine whacks, batoning, and other common torture tests. The only issue with the Triad lock is that sometimes the spring can be too strong to use the knife comfortably. I will say that once you get the hang of it, disengaging the Triad lock isn’t bad (it also gets easier as the knife breaks in).

AK-47 vs. the Recon1 or the American Lawman?

Chances are, if you are interested in the AK-47, you may also be interested in the Cold Steel Recon 1 or the American Lawman. If that is the case, I recorded a video where I do a detailed comparison of these 3 models that you may find useful.

If you still have any questions or are interested in another comparison feel free to leave a comment or contact me.

Cold Steel AK-47 Review – Final Thoughts

I was very by these new versions of the Cold Steel AK-47. It’s great to see how CS listened to feedback and responded with a highly improved knife. In fact, since I originally published this review in 2011, Cold Steel continued the upgrade path and bumped up the blade steel from AUS-8 to CTS-XHP. A solid knife has kept getting better and better.

The relatively lightweight design, the improved handle and lock, the better pomel and pocket clip – it’s all been fixed up, and still at a good price. In the past, people would gripe about the the cheap AUS-8 steel, but now that the steel has been upgraded there is little to complain about. Some wont care for the aggressive styling of the AK-47 design, and for those folks I might recommend the American Lawman or the Recon 1.

Cold Steel AK47 Folding Knife, Black 58TLCAK

Blade thickness: 3.5 mm
Blade length: 3 1/2 inch
Steel: carpenter CTS xhp alloy with DLC coating

I recommend purchasing the Cold Steel AK-47 at Amazon and BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.