Knives By Purpose

Spyderco C149G Vallotton Sub-Hilt Folder Review

I purchased my very first tactical folder during my Freshman year of college in 1992. That knife was a Spyderco Edura. Since that time, I have always been a fan of Spyderco knives. They were pioneers in that they were the first to incorporate a pocket clip into a knife design, deeply influencing the concept of the modern tactical folder as we know it today.

Buy the Spyderco Vallotton at BladeHQ

Buy on Amazon

Butch Vallotton is a custom knifemaker and tinkerer who is probably best known for his innovative method of converting a manual knife into an automatic. Butch and Spyderco teamed up a few years ago to offer a collaboration known as the Spyderco Vallotton Sub-Hilt Folder model C149G. This was an excellent move on Spyderco’s part, because the result was amazing.

General Dimensions and Blade Details

The C149G is a heavy-stock folder (6.2 ounces) with a thick 0.156” (4mm) modified tanto-style blade. The blade has a hollow grind on the cutting edge and a convex grind at the tip. This clamshell-shaped grind, known as a Hamaguri or Appleseed Grind, was very popular in designs by the late Bob Lum (the knifemaker who first introduced the modern tanto-style knife) and brings a distinct Japanese flare to the blade design.

The blade length of the C149G is 3.75 inches, and the length of the handle is 5 inches, resulting in a knife that is just under 9 inches in total length—8.687 inches to be exact. Based on those numbers, it may appear as though some length was lost somewhere—exactly .063 inches—but this is due to the angle of the handle near the ricasso.

The blade is made from Crucible Steel Company’s CPM S30V stainless, a proprietary powdered steel formulated specifically for cutlery. S30V is considered to be one of the best knife steels on the market. It is a very hard steel, so make sure you have a good diamond sharpener if you plan on touching up the edge. Of course, it will be a while before you need to re-sharpen it.

Handle, Ergonomics, and Pocket Clip

The C149G has a lightly contoured handle with black G10 handle scales. The highly-polished G10 scales have a beautiful, almost carbon-fiber look to them. The fitted stainless steel bolsters add a bold contrast to the black scales, resulting in a handle that has the aesthetic appeal of a custom folder.

There are four mounting options for the pocket clip. The knife can be configured to be carried in either a tip up or tip down configuration with the clip on either the right or left side. While this option makes the knife extremely versatile and customizable to the user, the mounting holes on the bolster do detract a bit from an otherwise flawless handle. The clip itself is stainless steel with a nicely polished black finish and the Spyderco logo laser engraved into the metal.

This Vallotton design pays homage to the Big Bear sub-hilt fighting knife designed by knife maker Bob Loveless. A comparison reveals that even the handle shape was heavily influence by the Big Bear. Since most of us here are knife nuts and like to concern ourselves with the minute details, I will go ahead and point out that, in the traditional sense of word, a folding knife does not actually have a hilt. A hilt actually refers to the entire handle of a sword or dagger. English is a derivative language, however, and knifemakers have historically modified the use of terms for lack of better descriptions, so I can see how calling this knife a “sub-hilt folder” is quite appropriate under the circumstances.

This knife is pretty comfortable in the hand, though it does not offer anywhere near the level of retention or ergonomics as its namesake. The thumb hole has some fine jimping on the back portion and doubles as a thumb ramp when the blade is open, but the “sub-hilt” offers little more than a finger grove, most of which is obscured by the liner lock. All in all, the handle is very aesthetically pleasing, but nothing to get overly excited about in terms of handling.

Deployment and Lockup

The C149G features Spyderco’s round thumb hole in addition to an ambidextrous thumb stud. The thumb stud doubles as a stop pin, in place of a locking bar, to prevent the blade from rotating beyond its lockup position. The combination of the two blade deployment options makes for a very positive single-handed deployment. I have found that the thumb stud serves well as a roadblock for the thumb to prevent it from slipping out of the thumb hole.

The stainless steel Michael Walker LinerLock™ is very robust. The beefy liners on this knife are about as thick as the blades of some of the folders in my collection. This beefy lock combined with the thick blade offers one substantial lockup. I do not expect this knife to close without permission under anything but the most extreme adverse conditions coupled with sheer bad luck.

Spyderco Vallotton Review – Final Thoughts

This knife is not for the weak or faint of heart. It is a hefty 6.2 ounces, so if you are not a strong swimmer, then I do not recommend that you jump into the water with this knife in your pocket, even though it is stainless steel. I have been packing my Sub-Hilt Folder around for a little over three years, and I have affectionately referred to it as my “folding fixed-blade” because it is such a stout folder. It remains to be the smoothest opening knife in my collection, as well as the easiest one to open under stress. The Spyderco Thumb Hole is in my opinion one of the best one-handed opening systems on the market, and the addition of the ambidextrous thumb stud only increases its reliability.

Although it is made in Taiwan, you would never believe it if it was not stamped on the blade. This knife has all the qualities of a handmade custom folder. This Italian-style, thick stock folder with its Japanese inspired blade design, à la Bob Lum, and its Loveless Big Bear flare, is not only an amalgamation of international blade culture, but a tribute to a couple of the greatest knife makers in American history. I do not know if that was what Vallotton and Spyderco intended when they began this project, but that is definitely what they accomplished.

Spyderco Vallotton Sub-Hilt Specialty Knife with 3.70" CPM S30V Premium Stainless Steel Blade and Black Textured G-10 Handle - PlainEdge - C149GP

Folding Knives: Locking folding knives are safe, compact, and easy to carry. They also happen to be where the Spyderco revolution began.
G-10 Handle: An epoxy filled woven glass fiber that is rigid, non-slip, and impervious to temperature changes and chemicals.
Hollow Grind: It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full Hollow Grind) or only a portion of its width.
PlainEdge Blade: This knife has a sharpened blade with no serrations or teeth sometimes referred to as a smooth blade.
Specifications: Closed Length (Inches): 5, Overall Length (Inches): 8.7, Blade Length (Inches):3.7, Blade Steel: CPM S30V, Grind: Hollow

I recommend purchasing the Vallotton at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Code 4 Review

by Dan Jackson 5 Comments

I have slowly worked my way through most of Cold Steel’s standard folders. I have reviewed the Voyager series, the Recon 1s, the American Lawman (probably my favorite), and even some of their more colorful offerings like the Spartan and Rajah III.

Buy the Cold Steel Code 4 at BladeHQ

Buy on Amazon

For some reason it has taken me a while to get to the Code 4 line of knives. The Code 4 series is different because they come with slim aluminum handles rather than G10 or plastic. Cold Steel advertises this as a police officer’s duty knife. Apparently a “Code 4” is police radio code for “No further assistance necessary”. Heady stuff.

At any rate, the knife is supposed to be light, slim, and tough. Functional yet easy to carry. That all sounds good to me. And once Cold Steel announced that they would upgrade the Code 4 to CTS-XHP I knew that I needed to make this model a priority. Soon enough I had one at my doorstep for review.

General Dimensions and Blade Steel

The Code 4 has an overall length of 8.5″, a 3.5″ blade, weighs 4.3 ounces, and is made in Taiwan. While it’s no Large Espada, this is still a big knife. Too big for me to EDC at the office, but certainly a good choice for the weekends or working in settings where a larger knife is appropriate. I can see where the Code 4 might make sense for a first responder or military member.

It is also worth mentioning that this is another clean and functional Andrew Demko design for Cold Steel. I have become a big Demko fan over the years, and think he has contributed a lot of great designs to the company.

Cold Steel offers the Code 4 in 3 different blade shapes: clip point, spear point (shown here), and tanto. I settled on the spear point because I think it is the most utilitarian looking of the 3, and I used my Code 4 as an EDC and work knife.

Cold Steel also offers the Code-4 with either a plain edge or partially serrated edge. I prefer plain edges, especially if the knife is coming in a high end steel like CTS-XHP. Plain edges are easier for me to maintain and a quality steel like CTS-XHP will hold a good edge for a long time. No need for serrations for what I need to do, but that comes down to personal preference.

My knife came with a high hollow grind and a swedge (top false edge). The blade has been given an attractive 2 tone satin finish. It has held up well under normal use.

The big draw to this new version of the Code-4 is that it comes with CTS-XHP blade steel. CTS-XHP is a high end steel from Carpenter. I have a good amount of experience with CTS-XHP at this point, and I think it’s a good steel. Offhand, I would compare it with something like CPM-154.

The CTS-XHP blade steel on my knife came with an aggressive edge. The knife attacked cardboard, rope, and wood. The blade is a little over 3mm thick, but has no problem cleanly slicing apples and paper. Edge retention has been excellent. CTS-XHP is a significant upgrade over the old AUS-8 blade, but also comes at a significant bump up in cost (it seems to be anywhere from 50%-75% over the old Aus 8 version, depending on where you shop). CTS-XHP is also easy to sharpen. I think that it is an all around smart choice for a working knife.

Handle, Ergonomics, and Pocket Clip

The Code 4’s handle is aluminum handle slabs with stainless steel hardware, a stainless steel lock bar, and an aluminum backspacer. While the handle slabs are a raw bead blasted gray, it is interesting to note that the backspacer is actually anodized golden brown. The end result is a handle that is simple, thin, and elegant.

The handle is also beautifully finished. The edges are all gently chamfered, the hardware is all perfectly inset. This is an immaculate knife. This is also a strong knife. With full metal construction I would wager that the Code 4 is one of Cold Steel’s stronger folding knives.

The ergonomics of the Code 4 is perhaps the knife’s biggest caveat. The design is fine, with a generous handle, 2 finger grooves and a slight thumb ramp, but because the knife is so thin I found the Code-4 uncomfortable to use for more than a minute or so without gloves. It is fine if you are going to open up a box or do some light foodprep, but if you plan on breaking down a bunch of cardboard or working on some serious carving you are going to want some gloves. The thin handle is great in the pocket, but bites into your hand.

Depending on how you intend to use the knife, this may or may not be a problem. For those that are wanting a self defense blade, this may not be an issue. But if you work at a warehouse and break down boxes for a living, I would go for a knife with a thicker handle, like a Large Voyager or Recon 1.

Although the Code 4 may not be the most comfortable knife in hand, it feels great in your pocket. It’s slim and discrete, and is likely ideal for someone like a police officer who carries a lot of gear and doesn’t have room for a massive pocket knife. At 4.3 ounces the knife is lightweight relative to its size and strength.

Cold Steel drilled and tapped the handle for tip up ambidextrous carry, and included 2 pocket clips for the knife. The pocket clips are simple steel clips, have good spring retention, and they work well. One nice thing about the lightly textured aluminum handle is that it does not tear up your pants like peel-ply G10.

Deployment and Lockup

The Code 4 comes with ambidextrous thumb studs. This is more like one and a half thumb studs, just like on the the American Lawman. The thumb stud is reversible with a flat head driver. There are phosphor bronze washers inside the handle, and the blade opens smoothly, and without too much effort. With that said, there is still a hefty backspring to overcome. This is not an easy knife to flick open. It can be done with practice, but won’t be a knife that you mindlessly flick open all day long.

The Code-4 comes equipped with Cold Steel’s infamous Tri-Ad lock. For the uninitiated, this is a lockback reinforced with a stop pin. Cold Steel has come under scrutiny lately over a gauche series of videos “comparing” the Tri-Ad lock to other locks on the market (where the Tri-Ad lock comes ahead by a wide margin). I am not sure what the value of these tests are when you consider the real world applications of a pocket knife, but it certainly has people talking.

Like all of the other Tri-Ad lock knives I have reviewed, this is a strong locking folder. There is not a suggestion of play in any direction on my knife. The lock is also reasonably to disengage, and doing so won’t kill your thumb. I am a fan of the Tri-Ad lock, and it is well executed here.

Blade centering is perfect on my example.

Cold Steel Code-4 – Final Thoughts

I am not sure why it took me so long to examine the Code-4, but I am glad I waited for the CTS-XHP version to come out. While the Code-4 is similar to knives like the Recon-1, the choice of aluminum for the handles over G-10 results in several important functional differences. The knife is super slim and easy to carry. I like that aspect of the Code-4 a lot.

What I am less enthused about is how the thin handle quickly becomes uncomfortable if you try to use the Code-4 for an extended cutting session. Gloves mitigate this somewhat, but this is an important point to mention. So often you hear reviewers (myself included) done on about how important it is for a pocket knife to be slim and light for easy carry. I still largely agree with that, but it’s important to understand that sometimes slimness has a price. In this case that price is comfort in hand. For that reason the American Lawman and Ultimate Hunter (both shown above) with their G10 handles won’t be leaving my collection any time soon.

I still think the Code-4 is an excellent tool and I intend to keep it in my collection. It’s like an upgraded Boker Titan Drop. If you primarily carry it for light utility and perhaps self defense (eg, as a police officer might carry it), then I think there is a lot going for the Code-4. It’s strong, intelligently designed, and nicely made. This is a no-nonsense tool, and I have no doubt that it will hold up for a long long time.

I recommend the Code 4 if you are seeking a long, slim, and strong daily carry folder, and don’t mind donning gloves for longer cutting chores.

Cold Steel Code 4 Spear Point Folding Knife

Made of highest quality material
Manufacturer: Cold Steel
Cold Steel Code 4 spear point plain edge 3.5in folding knife

I recommend purchasing the Cold Steel Code-4 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Emerson Mini CQC-7 Review

by Benjamin Schwartz 13 Comments

Last Updated: August 3, 2019
As Dan wrote in his review of the full-size model, the CQC-7 is one of the very first and most influential tactical knives in the world. Ernie Emerson’s influence on the perception and use of folding knives for self-defense is incalculable. I had wanted an Emerson knife for a long time, but my general reluctance to carry a blade over 3” meant that most of their standard models, the CQC-7 included, were a no-go. I had my eye on the Mini CQC-7 for a long time before it came back into production and I was able to pick one up.

Buy the Emerson Mini CQC-7 at BladeHQ

Buy on Amazon

History aside, my thoughts on this design are mixed. I think that the CQC-7’s pedigree has made EKI loathe to futz with the design of the knife, and users loathe to criticize it. This is a shame, because I think there’s a lot of room for improvement. Like the Delica, the Mini CQC-7 is an outdated knife. When it first released, it must have seemed like a revelation, but in 2016, it is neither the best design around, nor worth the price it is being sold at.

General Dimensions and Blade Details

The Mini CQC-7 has a blade length of 2.9”, a handle length of 4 1/8”, and an overall length of 7.25”. It weighs 4.4 oz. This is a fat knife, but one that feels quite balanced in the hand. The exact weight of a knife isn’t as important as the distribution of that weight: that’s why some light knives, like the Clipitool, can feel heavier than they are, and chunky knives like the Mini CQC-7 lighter.

The 2.9” blade, on my Mini CQC-7, is a chisel ground tanto. This is a real one-two punch in terms of things I have grown to dislike. There’s an unwarranted reverence for the tanto blade shape. I appreciate a run of straight edge on my blades but I want some belly too, and the stylized, angular shape of the American tanto lacks any at all.

Of course, it’s the tanto’s reputation as an ideal tactical blade shape that gives it its cachet. And it is a good piercer, with a quite a robust tip. But a good drop point or clip point blade would have excellent piercing capability and more than adequate tip strength, as well as a significantly more useful overall shape. I don’t carry a knife with the intention of using it for self-defense, but even if I did, I would prefer another blade shape: the tanto doesn’t do anything significantly better than a drop point or a clip point, and many things worse.

The Mini CQC-7 is chisel ground. The argument for the chisel grind is as follows: better strength, better edge retention, and it’s easier to sharpen. There have been long and articulate counterpoints made against these arguments, but for me it comes down to the simple fact that a chisel grind just cuts worse.

So much control is lost. Cuts track terribly through material. Approaching thin material like paper is a chore. I understand that some knives are made for hard use, and in these cases durability is more desirable than finesse, but here’s the thing: you can have both. The well-executed, traditional v-grind of the Paramilitary 2 can take a beating and slices like a dream.

Maybe, maybe, in the vacuum of theory, a chisel grind can withstand more abuse than a traditional V-grind, but I would bet it isn’t much more, and in what real-life scenario is it going to matter? And as far as sharpening goes: well, I guess it takes less time to sharpen one edge bevel than two, although you still need to maintain the unsharpened side of a chisel-ground knife, so you’re only saved a modicum of effort.

The steel on the Mini CQC-7 is 154CM. This is one of my favorite steels, and one I think can compete with N690Co for the title of Most Underrated Steel in the World. It is a solid upper-mid-tier steel that responds to sharpening as well as something like 8Cr13MoV, but holds an edge longer. No complaints about 154CM itself.

But the Mini CQC-7 costs about $165. As much as I’m sad to see the middle of the market drop out, one good thing that’s come from it is that we can expect a lot from knives in $150 – $200 price point. The Benchmade Valet costs $170 and has M390. The Zero Tolerance 0770 comes in Elmax for $120. You can get the Spyderco Mantra comes in M4 for $167. The Native 5 LW is half the price of the Mini CQC-7 and comes with S35VN.

This segment of the market is so competitive that I feel alright harping on the price a bit. Amidst such company, at such a price, 154CM is unacceptable – even more so when you consider that CPM-154, the powder metallurgy variant of 154CM, has been around for a while now. I think that, like the chisel grind and the tanto blade, EKI’s steel choice has been given a pass because of the historical significance of the brand and its blades, and the Mini CQC-7 suffers as a knife for it.

Handle, Ergonomics, and Carry

The Mini CQC-7’s handle is wonderful. The thickness of the knife and the swell in the middle of the handle work to make the Mini CQC-7 very comfortable in hand. The jimping is mild, really better for indexing than for locking your hand in place. The real grippiness comes from the G-10, which is very coarse without being overly aggressive like Cold Steel G-10. Superbly executed all around.

The clip is the same clip you see on almost every Emerson, and like the ergonomics it is an unqualified win. And, as thick as the knife is, I don’t mind it in the pocket. It stays out of the way and isn’t so bulky as to be noticeable when I’m walking around – again, showing how important distribution of weight is with pocket knives.

The Mini CQC-7 isn’t tapped for left hand carry. Emerson can tap it for you, but A) you have to get the knife from EKI or send it in, and B) it will cost you $25. There are a lot of knives with non-repositionable clips, even at this price point, but given how integral the wave opening is to the design of the Mini CQC-7 it should come drilled for righties and lefties out of the box. For reference, the Emerson/Kershaw collabs are all drilled for both.

Deployment and Lockup

The Mini CQC-7 can be deployed via two different methods: either by the thumb disk or by the Emerson wave opener.

The thumb disk works but is slow – pretty smooth, admittedly, but slow. It almost feels like the knife is pivoting between two layers of cloth. From what I understand the Nylatron washers here are another Emerson standby. I don’t mind them, and if they are supposedly lower-maintenance than phosphor bronze or Teflon washers then that’s fine. Just know that you’re never going to flick this knife open.

Of course, the way you’re supposed to deploy the Mini CQC-7 is with the wave opening feature. The wave is a small hook on the end of the thumb ramp that, when you pull the knife from your pocket, catches on your pants seam, opening the knife as you are retrieving it. It’s…fine, I guess? I’ve had multiple wave opening knives and I don’t really buy into the utility. I’m not good at it. I get a lot of misfires. It makes traditional retrieval a bit complicated; the wave will catch a lot of the time and half-open the knife; I’ve cut myself more than once because I pulled a half-open Mini CQC-7 out of my pocket.

It’s also not a ‘polite’ way of opening a knife around folks who may not be comfortable around edged tools. I wouldn’t fault it for that if it were a larger, more distinctly tactical knife, but even the Emerson literature implies that the Mini CQC-7 is something you can take with you anywhere. If subtlety or politeness is a concern, then you may find the wave opening method a little theatrical for the non-knife people around you.

The Mini CQC-7 has a titanium liner lock. It works. Like any lock made of titanium, I worry about wear over time, but the worst thing I can say for it over two years of ownership is that it doesn’t always lock up at the same point against the tang. If I deploy it hard it travels far across, but if I roll it slowly it just barely slides underneath. To be expected? Probably. I don’t recall noticing this happening on any steel liner lock knives I own, but regardless lockup is very good.

Emerson Mini CQC-7 Review – Final Thoughts

I’ve been hard on the Mini CQC-7. I want to stress that, in a vacuum, it’s a fine blade. But it doesn’t exist in a vacuum, and not even years of accreted Emerson mythology and reputation can save it from looking hopelessly out of step and overpriced in today’s market.

A Mini CQC-7 with CPM-154, a slimmer handle, a conventionally-ground drop point blade, and tapped for both left- and right-handed carry would be an interesting proposition at the price it’s being offered at.

But that isn’t the knife we have. We have the same blade, more or less, that Emerson was selling a decade ago, and probably the same blade they’ll be selling five years from now. I know that Ernie Emerson and his team are probably working on new designs instead of trying to update old ones, but if there were one in the lineup that deserves an update, it’s the CQC-7. This pioneering tactical knife has been left in the dust. I’d like to see it be at the vanguard again.

EMERSON MINI CQC-7 2.9 inch SATIN Plain

I recommend purchasing the Emerson Mini CQC-7 at Amazon or BladeHQ. Thanks for checking out the review.

Editor’s Note: This is a fairly critical review from Ben, but I think it is well reasoned and ultimately fair. The value proposition for knives like this Mini CQC-7 continues to shrink in light of all the advancements in the marketplace. Also, the price point of these Emersons are just painful. If this was a $100-120 knife, I think a lot of the CQC-7’s perceived shortcomings could be overlooked. Still, the CQC-7 remains a classic, and if you are curious about Emerson knives or can find a nice deal then I think this is a good place to start.

Gerber Downrange Tomahawk Review

by Chad McBroom 4 Comments

The tomahawk is a North American hand-axe first used by the Algonquian Indians. Originally made from stone, the introduction of metal blades came with the arrival of the Europeans to North America. The tomahawk remains one of the most versatile bladed tools in existence. Modern uses of the hawk include breaching, rescue, survival, and close-quarter combat.

Buy the Gerber Tomahawk at BladeHQ

Buy on Amazon

The tomahawk has seen a huge surge in popularity over recent years. The Gerber Downrange Tomahawk is just one example of the modernization of this classic weapon and tool.

Purpose

From the moment you lay your eyes on it, it is evident that the Gerber Downrange Tomahawk has one purpose, and one purpose only—destruction! Sure, you can take this tool camping and use it to chop fire wood and drive tent stakes, but it would be like using a tank to drive your date to the prom. This tool is made for breaching—designed to remove unwanted doors form walls and unwanted walls from doors.

General Dimensions and Blade Details

The Downrange Tomahawk (DRT) has a three-purpose axe head designed to pack the most function into this breaching tool: A beveled edge for chopping through drywall, doors, vehicle skins, rope, etc.; a hammer head for busting locks, doorknobs, hinges, and the like; and a cutaway grip for controlling the pry bar end. Measuring at 19.27 inches, the Downrange Tomahawk is one of the larger “tactical” tomahawks on the market. While this makes it a little more cumbersome to pack around, it definitely adds to its leveraging capabilities when used as a pry bar.

With the exception of the welded on hammer head, the DRT is made from a solid piece of 420HC steel and finished with a black Cerakote™ coating. A sweeping beard that comes to a point at the heel gives this hawk excellent hooking capabilities, which can be used for ripping out the busted shards of its target, or for hooking onto stumps and logs when climbing up difficult terrain.

One of the major complaints that I have heard voiced by customers is the DRT’s lack of a sharpened edge. This usually comes from those who fail to understand the intent of this breaching tomahawk. A sharpened bevel is great for chopping wood and other cutting tasks; however, when it comes to breaching a door or cutting through the skin of a downed UH-60 Black Hawk helicopter, a sharpened bevel tends to over penetrate and get stuck, making the task more difficult. Gerber’s thought process then, was that their tomahawk could easily be sharpened for survival and bushcraft use, but with breaching and rescue being the primary focus of this design, a less aggressive bevel was ideal.

Handle and Ergonomics

The DRT has integrated tan G10 handle scales that contour with the jimping on the upper and lower portions of the handle. The bottom portion of the handle has jimping on both the front and back, whereas the top portion of the handle has jimping only on the front. The aggressive jimping makes for a very secure grip, especially when wearing gloves. The location of the jimping on the bottom portion of the handle is in the perfect location for gripping the tomahawk for maximum chopping leverage.

As mentioned earlier, the head doubles as a handle for the pry bar via a cutaway in the center. The addition of four finger groves creates a nice home for your hand inside the handle. There is also a small guard where the head and the handle meet. This guard protects your hand from getting smashed when you are choking up on the hawk.

Sheath

A tool like the DRT is rendered useless if it is not accessible when you need it. The best breaching tool in the world won’t open a single door if it is sitting back in vehicle you drove to the objective. The DRT is made packable through a MOLLE-compatible sheath system that incorporates a molded pry bar sleeve attached to nylon webbing. Two snapping retention bands secure the tomahawk in place. Two side-by-side MOLLE attachments at the top and a centered MOLLE attachment at the bottom of the webbing can be used to attach the DRT to a pack, standard webbing, or body armor so that the DRT goes where you go.

There is a separate portion of the sheath system that covers the tomahawk’s head. The head cover slides over the head and secures in place with a snapping nylon strap. This cover leaves the hammer head and the cutaway handle exposed so the pry bar and hammer can be used with the head cover in place. This reduces deployment time by eliminating the need to remove the cover unnecessarily, while acting as a safety measure to keep the edge covered during prying.

Testing

I took the DRT out to a building that was scheduled for demo and put it through the paces. Doors, drywall, and sheet metal were no match for the DRT. I was able to turn an interior door into splinters within a matter of seconds and the bevel worked like a can opener on the sheet metal. The pry bar also worked like a charm for separating doors from their frames. Using the hammer head, I was able to remove door knobs and hinges with a few whacks. Cinder block also proved to be of little consequence when it came to stopping the DRT.

Gerber Downrange Tomahawk Review – Final Thoughts

The Gerber Downrange Tomahawk is an extremely versatile breaching tool that performs as advertised. I was actually a bit surprised by its performance. I am a bit of a steel snob and 420HC is not one of my favorite steels. While 420HC is on the higher end of the 400-grade stainless steels, it is a low-grade blade steel generally speaking. I have learned, though, that I am often surprised by the performance of some of these lower grade steels when they are properly hardened. I have not tried putting an edge on the DRT, so I do not know how well this 420HC hawk will retain an edge, but as it is out of the box, it performed well.

Compared with offerings from boutique brands like Hardcore Hardware, RMJ Tactical, and Dawson knives, the DRT is priced appropriately at under $200 retail. I definitely recommend the Gerber Downrange Tomahawk for anyone looking for an effective breaching/rescue tomahawk.

Gerber Gear Downrange Tactical Tomahawk Survival Multitool, Camping Axe with Hammer Head and Steel Pry Bar, Includes Sheath with Integrated Molle Straps

DURABLE CAMPING GEAR: Features a multi-purpose breaching tool, with axe head with beveled edge, hammer head, and integrated pry bar for ultimate control in tactical situations
INNOVATIVE DESIGN: USA-made from 420HC steel with a corrosion-resistant Cerakote finish, ensuring this survival tool won't bend or break under pressure
VERSATILE OUTDOOR ACCESSORY: Combines the functionality of a tactical tomahawk, hammer, and pry bar in one compact multi-tool, perfect for various tactical and survival scenarios
COMPACT AND CONVENIENT: Includes a low-profile MOLLE-compatible sheath for easy attachment to your pack, standard webbing, or body armor, great portable tactical gear
OUTDOOR ESSENTIALS: Ideal for hunters, soldiers, tradesmen, and outdoor enthusiasts; a crucial addition to any tactical load-out or essential survival kit equipment; Backed by the Gerber Guarantee, a limited lifetime warranty

I recommend purchasing the Gerber Downrange Tomahawk at Amazon or BladeHQ.

Zero Tolerance 0452CF Review

by Chad McBroom 15 Comments

When it comes to folding knives, I am extremely selective in what I choose to carry, especially if it is a blade that I am going to carry for self-protection. It has to be light, reliable, sharp, and geometrically efficient. These are just a few of the qualities I look for in a folder. After all, a folding knife is already at a disadvantage over a fixed blade, due to the fact that it has to rely on mechanical functions.

Buy the ZT 0452CF at BladeHQ

Buy on Amazon

I had been a fan of Zero Tolerance’s quality and construction ever since they came on the market a few years ago, but I wasn’t crazy about their designs. They built tanks, but I wanted something that was as tough as a tank, but as sleek as a Ferrari at the same time. Finally, I discovered the 0452CF.

The 0452CF is a streamlined, mass production version of the award-winning 0454, designed by Dimitry Sinkevich, who is an artist in the realms of both beauty and function. I was instantly drawn to this knife because of its long, narrow blade and slender profile. I had finally found a Zero Tolerance that would suit my personal needs. It was destined to become one of my favorite EDC knives.

General Dimensions and Blade Details

The 0452CF has a blade length of 4.10”, a handle length of 5.17”, an overall length of 9.27”, and is made in the USA. The knife weighs in at 4.64 ounces, which is extremely light considering the size of the knife. In fact, if it were any lighter, it would probably be too light. This knife has just the right amount of weight to it. Plus, it is perfectly balanced right at the first finger grove.

The blade of the 0452CF is a flat-ground, drop point design with a satin finish. The blade is constructed of 0.16” CPM-S35VN. This is an excellent steel made by Crucible and designed specifically for knife making. This steel has excellent properties in the areas of edge retention, toughness, and corrosion resistance, which make it an excellent choice in for an EDC blade.

One of the primary reasons I chose this particular knife as an EDC defensive blade is the blade geometry. The long, narrow drop point with the ¾+ false edge is an excellent thrusting blade. Of course, it does a fine job cutting as well and came razor sharp right out of the box. The 0452CF is just a great all around defensive blade.

The first thing I did when I took the knife out of the box is do some cutting tests. First, I did a paper test and the blade sliced off slips of paper with laser precision. Then I set up a couple of full 12-ounce water bottles and slashed away at them one at a time. The knife cut almost completely through each water bottle. Very impressive for a 4.1” folding knife!

Handle, Ergonomics, and Pocket Clip

The handle of the 0452CF is carbon fiber on one side and titanium on the other side, which is the reason this knife is so light. It has a slender profile with very subtle finger groves where the index and pinky fingers rest. The curvature at the back causes the handle to sit comfortably in the hand, giving it a subtle forward cant for perfect wrist alignment. When closed, the blade sits so deeply inside the handle that it adds very little to the handle’s profile, resulting in a slender package that tucks nicely along the seam of the pocket.

One of the things I love about Zero Tolerance is their deep pocket clips. This knife is no exception. The deep pocket clip mounted low on the handle allows this knife to sit almost completely concealed inside the pocket. The clip on this knife has a very small signature as well, causing the knife virtually to disappear in the pocket.

Deployment and Lockup

The 0452CF has a flipper mechanism for quick, one-handed opening. Unlike its 0454 predecessor, the flipper mechanism on this model has some nice jimping to ensure positive finger contact with the flipper. A strong detent system not only locks the blade in place when it is in the closed position, but also adds counter resistance so that the blade launches open when the pressure on the flipper breaks free of the detent.

When I first got the knife, the detent was pretty stiff. I had to use a hard wrist flick to open the knife. During the 2016 SHOT Show, a product rep stopped me and asked if he could demo some of his micro-particle oil on my knife. He put a small drop on the detent pin using a needlepoint dropper, and that was all it took to make the blade deploy with a simple flip of the index finger. It has been silky smooth ever since.

The 0452CF employs the KVT (Kershaw Velocity Technology) ball bearing system, which rotates around a large, beautiful five-spoke pivot pin. The titanium side of the handle provides a durable frame lock. Combined with a hardened steel locking bar, the titanium frame lock ensures a solid lock up. I feel very confident with this knife’s locking system.

Zero Tolerance 0452CF Review – Final Thoughts

I am not at all displeased with my Zero Tolerance 0452CF. This knife is everything I expected it would be and more. It has become a regular part of my Every-Day Carry kit. I typically carry multiple knives, but this is the one knife that always goes with me. I have been carrying this knife every day for about 4 months now. It has held its edge like a champ, and the opening has only gotten smoother over time.

I cannot say enough good things about this knife. If you are looking for a high-quality, tactical folder, then you would be doing yourself a favor by purchasing the ZT0452CF. I’m very glad that Zero Tolerance decided to run this production run of the Dimitry Sinkevich collaboration. In fact, not to diminish the artistic beauty of the 0454 in any way, but I would even go so far as to say that some of the features of this production run (i.e. the jimping on the flipper) are upgrades over the original. I have no doubt that others will enjoy this knife as much as I have.

Zero Tolerance 0452CF; Pocket Knife with 4.1” Dual-Finished S35VN Steel Blade, Carbon Fiber Front and Titanium Back Handle Scales, KVT Ball-Bearing Opening, Frame Lock, Deep-Carry Pocketclip; 4.6 OZ.,Large

4.1-inch S35VN steel blade shows amazing toughness and resistance to edge chipping, with improved edge retention
Handle features carbon fiber front and titanium stonewashed back for comfortable in-hand feel, increased strength and excellent size/weight proportion
Handsome, dual blade finish with a non-reflective satin finish on the grind and stonewashed finish on the flats and blade thickness is 0.156 inches
Great companion for hunters, business professionals, wilderness guides, survival experts, first responders, military, law-enforcement and more
Ideal gift for any special occasion such as birthdays, holidays, graduations, anniversaries, promotions, weddings and more

I recommend purchasing the ZT 0452CF at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 300-1 Axis Flipper Review

by Dan Jackson 6 Comments

Last Updated: August 2, 2019
The Benchmade 300 is a knife that I originally passed on reviewing. This wasn’t an easy decision. As Benchmade’s first flipper, this is an important knife. But initial reports said that the flipping action was weak, and the knife seemed chunky. I was turned off for those reasons. Rather than going through the motions of reviewing a knife that I did not want to review, I decided to focus my efforts elsewhere.

Buy the Benchmade 300 at BladeHQ

Buy on Amazon

I think it was a mistake to ignore the 300. In a sea of somewhat boring and predictable Benchmade offerings, this knife offered a glimpse of something different for the company; even if it’s simply hitching on to the flipper wagon.

As I review some of Benchmade’s 2016 models, I see a few more flippers in the mix. I can’t help but wonder how the 300 has informed these new flippers, and future knives for Benchmade. That is what really drew me to examine the 300.

General Dimensions and Blade Details

The 300 has an overall length of 7.36″, a 3.18″ blade, weighs 4.85 ounces, and is made in the U.S.A. Technically, my knife with the black and blue G-10 handle scales is referred to as the 300-1. The original 300 comes with sand colored peel-ply G-10 handle scales and satin hardware. Beyond the scales and hardware you have the same knife. I am going to refer to my 300-1 as simply a “300” throughout this review.

The 300 knife is designed by Butch Ball, a nice man that I had the pleasure of meeting at the 2015 Blade Show. The 300 is aimed at the Every Day Carry (EDC) market. It is on the large side for my style of daily carry, although it makes for a nice “nights and weekends” knife when I can dress a little more casually. I have used it in an EDC capacity, and can see how others might do the same.

The 300 features a wide clip point blade. This is a dramatic blade that juts from the handle with a pronounced thumb ramp, deep belly, and large flipper. The high flat grind and bright satin finish contrast sharply with the dark handle and black hardware. There is a thin swedge that terminates with a fine tip.

In practice the 300 proved itself to be a capable slicer. Although the blade stock is relatively thick, this is a wide blade, and the high flat grind gets thin behind the edge. Standard fare like cardboard, rope, and apples are easily cleaved by the 300. A deep belly and strong tip are hallmarks of clip point blades, and these features aid the 300 in food prep and penetrating cuts. This versatile blade shape is well rounded and the 300 should handle most EDC chores without complaint.

Benchmade decided on 154CM for the blade steel. Knife fans will already know that this is a proven stainless steel, although it is now considered a mid range steel. Personally, I remain a big fan of 154CM. It takes a beautiful edge, holds it well, and is easy to sharpen. Like all steels (even stainless steels) you will need to keep the knife clean to avoid corrosion, but if adequately maintained this is an excellent working steel ideally suited for daily use.

Handle, Ergonomics, and Pocket Clip

My 300 came with 3-d machined layered blue and black G10 handle scales over blackened stainless steel liners (again, technically this is considered the 300-1 in Benchmade’s catalog). The knife is held together with torx-head fasteners and 2 blackened stand offs. The 300 originally is offered in sand colored peel ply G10 with odd grooves cut into it. It was different, and I appreciate that, but it did not appeal to me. The blue/black G10 is a little more toned down, but it still offers the end user something besides a plain black handle. The steel liners have been skeletonized extensively. The fit and finish is excellent on my knife.

The entire knife looks wide and unwieldy, but it all makes sense in hand. There are a series of finger grooves, that I typically am not a huge fan of, but I was pleasantly surprised with how natural the 300 fit my fingers (I take a “large” glove for reference). The thumb ramp features 3 shallow notches (jimping) that more index your thumb than hold it in place. This is a stark contrast from the toothy jimping on the Griptilian.

The machined G10 handle scales offer traction, but the texture is not aggressive like peel ply G-10. The texture is similar to the handles of the Volli or the Bedlam. If you prefer the traction and feel of a peel ply G-10 handle, then check out the tan colored version of this knife.

In practice this is a comfortable work knife. It stayed in my hand and did not irritate me in use. The finger grooves actually worked here for my hand.

Benchmade chose a black parkerized deep carry pocket clip, and situated the 300 for ambidextrous tip up carry. I like the deep carry clip and clip placement. The 300 buries deep into the pocket and carries well considering this is a larger knife. And I do consider the 300 to be a larger knife. Despite having a sub 3.5″ blade it is still a wide and thick knife. For what it is, I think the 300 carries pretty well.

Deployment and Lockup

The big draw to the 300 is that it is Benchmade’s first flipper, and that this is an axis lock flipper. In a perfect world we would get exceptional flipping action combined with the safety and convenience of the axis lock.

I am here to report that this knife does not flip like a traditional liner lock or frame lock flipper. The axis lock simply does not provide enough resistance (or “detent strength” if you were to compare it to a traditional detent driven flipper) to provide snappy flipping action. However, my knife was not a total flipper fail. If you use a strong lightswitch flick it is possible to flip the knife completely open without using your wrist. It takes some practice, and doesn’t compare to a ball detent driven flipper, but the knife does flip open this way. On a “1 to 10” scale, I’d say this is a 3. It still flips better than my 3” XM-18 did, but this isn’t a Shirogorov by any means.

Benchmade wisely chose to include ambidextrous thumb studs on the 300. This is a more reliable means of opening the blade, and provides the user some options in how they want to manipulate their 300. The thumb studs deploy the blade as easily as a Griptilian or any other axis lock knife with thumb studs. And of course you can use the axis lock to flick the knife open as well.

Speaking of axis locks, the axis lock on my 300 is excellent. My knife is rock solid and devoid of any horizontal or vertical blade play. I remain a big fan of the axis lock because it is strong, easy to use, is fully ambidextrous, and you do not need to put your fingers in the path of the blade to close the knife.

Blade centering is near perfect on my 300.

Benchmade 300 Review – Final Thoughts

I am glad I finally bought a 300. This is an interesting and important knife for Benchmade, and I was pleasantly surprised by it. The big question is “How well does it flip?” I am here to confirm that the flipping action is nothing to write home about. It works, but requires practice and a strong index finger.

If we examine the other aspects of the 300 it reveals a thoughtful and well made knife. The fit and finish is good, the knife cuts well, the steel is good, the handle is comfortable, and the 300 carries decently given its size.

It’s a thick and larger knife, so don’t expect this to carry like a Valet, but for a sturdy working knife this fits the bill. If you are a fan of knives like the Rift, then I think you would appreciate the 300.

This is an interesting first attempt at an axis lock flipper from BM. I wouldn’t call it a home run, but I am glad I picked one up. I am curious to see how Benchmade’s new 2016 flippers stack up against the 300, and plan to review at least one of them in the not so distant future.

In closing, don’t buy the 300 if you are expecting a Zero Tolerance grade flipper with an axis lock. The flipping action is simply not up to par with a ZT. Buy the 300 if you are a Benchmade fan that likes larger EDC knives, and wants to try something a little different.

Benchmade - AXIS Flipper 300 Knife, Plain Drop-Point, Satin Finish, Sand Handle

HIGH-QUALITY: The 154CM stainless steel blade is tough, rust resistant, and holds an edge well. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures, making it great for outdoor use.
WELL-DESIGNED: The AXIS Flipper 300 offers the speed and function of AXIS Assist, with the convenience of a flipper. The 300 can be opened and closed quickly and single-handedly.
COMFORTABLE: The 300's contoured handle is attractive and comfortable to use and hold. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The AXIS Flipper 300's drop-point, utility blade style and all-around functionality make it ideal for everyday carry.

I recommend purchasing the Benchmade 300 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.