EDC Knives

Pohl Force Mike One Review

Last Updated: July 31, 2019
I have lusted after the Pohl Force Mike One for years. I wanted one for years. For the uninitiated, Pohl Force is a tactical knife company owned by Dietmar Pohl, a long time knife collector, knife designer, knife enthusiast, and author of books on knives. I have met with Dietmar, and the USA distributors for Pohl Force a couple times at Blade Show.

Buy Pohl Force Knives at BladeHQ

It was hard to walk away from the Pohl Force booth without a Mike One in hand, and I eventually broke down and bought one. I’m glad I did. Even 3 years later this knife is still awesome and unique. It’s like a European Strider with its integrated G10 handle scale/backspacer, not to mention the unique profile and finish work. But I’m getting ahead of myself. There is a lot to consider with the Mike One and I’m glad to present this review, even if I’m a little late to the Pohl Force party.

General Dimensions and Blade Details

The Mike One has an overall length of 8.66″, a 3.74″ blade, weighs 5.64 ounces. The Mike One is made by Lionsteel Knives in Maniago, Italy. This is advertised as the “EDC size” Pohl Force folder, and it certainly seems to be EDC (Every Day Carry) sized next to the Foxtrot One, which is a massive knife featuring a 4.5″ blade and overall length of 10.25″.

This Mike One is still a formidable knife, but could be a good size for EDC if you are a police officer, military member, or anyone else who can get away with a larger daily carry blade. Personally, this is not a daily carry as I tend to favor knives in the 3-3.5″ blade range for EDC.

The Mike One sports a slender drop point blade with a high flat grind and swedge. This is a 5mm thick blade, which is quite beefy for a folding knife. While Lionsteel has done a nice job grinding the blade to a thin edge, this is still a stout blade with hard use in mind. The tip is formidable and there is plenty of cutting edge. It strikes me as a great well-rounded blade shape that could be pressed into a wide range of tasks.

My particular version of the Mike One is the “Outdoor” version with the stonewashed finish. There is also a black PVD coated “Survival” version. I favor this stonewashed version. The blade is still quite reflective despite the tumbled finish, and you can almost use it like a mirror.

Niolox is the de facto steel for Lionsteel’s outdoor focused blades, and it’s a nice choice on this Mike One. I have some experience with Niolox after extensively testing the Blackwater Grizzly 6 and Ursa 6. Niolox has proven itself to be tough, yet reasonable to sharpen and resistant to corrosion. I think it’s a great choice and I’m excited to have the steel in a folder. I consider it to be a good upgrade over something like D2, with improved stain resistance.

Handle Design, Ergonomics, and Pocket Clip

As I alluded to earlier on, this knife comes with a beautifully sculpted black G10 handle slab and backspacer. Just like on the Strider SnG, this is a single piece of G10 that forms both the backspacer and non-locking side of the handle. Lionsteel kicked the production values up a notch by putting finishing the handle with a grooved pattern and also machining a geared backspacer. An equally impressive titanium framelock and black chain ring bolt hardware add further detail and visual interest to the handle. They did an awesome job and in my opinion, the build quality and finish work is higher than on that of the Strider.

The 50/50 forward finger choil and dual thumb ramps offer the end user a ton of grip options. You can choke up on the blade for detail work, or choke back for leverage per the below picture. Regardless of how you hold the knife it always feels comfortable and natural. The milled handle and backspacer compliment the handle design nicely by providing good traction without being irritating. There is little jimping, and the knife is comfortable to use, even after extended heavy cutting tasks like carving and push cutting rope.

The Mike One features an oversize wire clip. Frankly I wasn’t aware of how much some people loathe the Spyderco wire clip. One commenter said that the Spyderco wire clip was “feeble” and that I was “feeble” for liking it. You gotta love the internet – that’s a strong opinion on a pocket clip!

At any rate, the Mike One’s wire clip is nothing like the Spyderco version, so if you don’t like the Spyderco clip you may like the clip on this Mike One. For starters, it’s a much stronger clip. The knife has great retention in the pocket between the tough clip and corrugated handle. This clip has some pant shredding potential, but it will never fall out of your pocket. While not a true deep carry clip, the Mike One still buries deeply and carries discretely thanks to the matte finish and stealthy nature of wire clips in general.

Despite this being a near 6 ounce knife the Mike One carries well thanks in large part to the sturdy clip. I occasionally forget I am carrying this one. I wouldn’t carry this in slacks, but for shorts, jeans, or work pants you will find that the Mike One behaves well in the pocket.

Deployment and Lockup

The Mike One makes use of a serrated thumb disk. Thumb disks are not my favorite method of deployment, but it works here. The thumb disk is removable, which makes the knife a 2-hand opener, and more appropriate in some of European countries. The action is slow and purposeful thanks to teflon washers. Again, teflon washers are not my favorite choice. I really would like to see phosphor bronze washers here, as I think the knife would open a little easier with them. The end result is that you have a knife that takes a fair amount of effort to open – especially when compared with the flippers of today. This is probably my biggest gripe with the Mike One.

This is a titanium framelock, and here we have no steel insert. Lockup is extremely secure, opening with a heavy “click”. There is no blade play in any direction. Nor is there any blade stick. As far as titanium frame locks go, I think this one has been well executed. The end result is impressive and tank like. The Mike One is all business, and that shows in the deployment and lockup.

Here is a shot of it next to my LionSteel TM1:

LionSteel did include their RotoBlock mechanism on the Mike One. The RotoBlock is an over travel stop that prevents the user from hyper-extending the lock bar, and it can also be twisted to lock the knife open. It’s an interesting feature, but not one I ever find myself using. It’s probably handy if you ever decide to test the limits of the Mike One. For regular guys like myself it will probably get in the way more than it will help. Blade centering is good on my knife. Not perfect, but pretty close.

Pohl Force Mike One Review – Final Thoughts

This review has been several years in the making, and I am glad to finally have one in the collection next to my Fantoni CUT Flipper and LionSteel TM1. This is another a unique and practical design that has been executed beautifully.

I prefer this smaller format to the larger FoxTrot One. I handled the FoxTrot One, and it’s almost comically large. While the Mike One is a more practical EDC than the FoxTrot One, I wouldn’t mind seeing something even smaller. 3.5″ blade is about as big as I will go for EDC, but I realize that Pohl Force is catering to more of a military and LEO crowd. So while this is more of a collectible for me than a daily carry, it is a fully functional knife and designed for use.

I also like how Pohl Force goes so far as to include an oversized zippered pouch, a “Zertifikat” of authenticity, and even a Tuff Cloth and a kydex sheath. Everything about the Mike One is top shelf, and clearly a lot of thought and care went into all aspects of this knife.

Although Pohl Force has ceased working with dealers effective June 2016, you can still find Pohl Force Knives at BladeHQ or possibly Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Freeman Outdoor Gear 451 Flipper Review

by Benjamin Schwartz 6 Comments

Last Updated: August 5, 2019
Few of us have the money to shell out hundreds of dollars for every knife we think we might like. We have to cull the herd. Maybe we splash out for a promising ‘Maybe’ every once in a while, but 80% of the time we go for the sure thing. Most of the knives I skip I forget about, with nary a second thought given them. But every so often a Maybe knife won’t be forgotten. It lingers in the memory and asks me over and over again, “What if you’re missing out on something special?”

Buy Freeman Outdoor Gear at BladeHQ

Such was the case with the Freeman Outdoor Gear 451 Flipper. I heard good things, and admired the flipping action, unique aesthetic, and button lock mechanism from afar. My cursor would hover over the “Add to Cart” button on the Freeman website, but I never could quite commit. Thankfully, a friend and fellow gear geek offered to send his 451 my way to try out.

After wondering for years what this knife is like, I’ve had a chance to try it out, and the news is mostly very good. The Freeman 451 flipper manages to bring a unique set of features to a section of the market that is saturated with a lot of sameness. It goes deeper than a straightforward recommendation, but there’s a lot of interesting things to cover.

General Dimensions and Blade Details

The 451 has a blade length of 3 5/8”, a handle length of 5 1/8”, an overall length of 8 13/16”, and is made in the USA. There are bigger blades than the 451, but this pushes up right against the limit of what I would consider reasonable proportions for something that folds and is meant to be carried the pocket. That is strictly a function of the 451’s overall shape, however: at 5.5 oz. it’s actually quite light for its size.

The market is so rife with drop points that you think I’d be sick of looking at them. However, the proportions and grind make the 451’s blade shape memorable and useful. This feels like a blade that can take a beating , with thick blade stock and a lot of material brought right up behind the edge, but the grind is masterful: a mirror-polished secondary bevel that is nice and wide without being thin or brittle. The result is a combination of toughness and slicing ability that is rare in big blades. This is probably as good a balance as you’re likely to see on a knife this size.

The striations on the blade are bound to polarizing. I actually think they’re look pretty good, and they make cutting through choky material like cardboard easier. The knife almost ‘revs up:’ the longer the pull through material, the easier it gets. They might cause issues with long-term sharpening, but other than that I can’t complain.

Steel here is D2. This is a venerable tool steel that I have had very little experience with before now. The edge was very clean and very sharp. I think the thick stock and wide-but-not-narrow edge bevel really accentuate D2’s edge holding ability while minimizing its reported tendency to chip. In another smart move Jeff Freeman chose to Cerakote the blade. As a semi-stainless tool steel, rust is a concern with D2. In an uncoated blade the grooves would give me pause; I can see moisture creeping into them and wreaking havoc. Thankfully, between the coating and the mirror polish on the bare edge, I’d say you’re pretty much protected set barring grossly neglectful behavior.

Handle, Ergonomics, and Carry

The handle on the 451 looks like your average one finger groove affair, but that isn’t quite how it feels when you’re holding it. That finger groove is huge. It can accommodate two fingers, actually, but it works best with one finger in it. Holding the knife naturally, the pointer finger rests at the very bottom of the groove. This gives your knuckle some clearance so it isn’t butting up against the flipper tab – something that so many flipper knives neglect to do.

In terms of control, it’s good. Your hand is situated pretty far back. You undoubtedly lose fine control, but fine cutting tasks aren’t the 451’s calling. I used to think that all big knives that couldn’t also do fine cutting were needlessly sacrificing something, but that’s not true. Just because the PM2 can function as an EDC doesn’t mean that all larger knives have to, and really the PM2 is just barely a big a knife anyway. The 451 is much more clearly meant for specific kinds of tasks, and in those tasks the ergonomics are great. There’s a sort of finger choil on the blade itself as well, but I found it a little too close to the edge for my comfort.

The 451 carries quite well for a big knife. You could EDC it if you wanted and not be totally displeased with the in-pocket feel. But where I think the 451 excels is in its lightness and narrow frame relative to other hard-use big blades. You aren’t going to feel like you have a paperback strapped to your thigh carrying the 451 on a hike. The aluminum frame is gentle on your pockets and the titanium clip is adequately-tensioned and beefy as hell.

Deployment and Lockup

I don’t think flippers are, in any way, an improvement over thumb studs or opening holes. I tend to think that they are in fact actively worse. They often muck up the ergonomics of a knife, and they always make it a worse carry. The 451 makes its flipper as agreeable as possible.

It deploys surely and swiftly every time. The weight of the blade and the strength of the detent make the 451 a snappy and sure flipper. You have to try to mess up the flipping in order to get the 451 to not lock up. It’s hard to do.

The button lock is still something of a novelty in the knife world, isn’t it? Hogue has been using it with success, but other than that the only non-automatic production maker using button locks regularly is Gerber. Maybe this is a vestige of Freeman’s influence on the company (he was head designer there for many years), who knows.

Either way, the Freeman clearly believes in the button lock, and it’s easy to see why. On the 451 it is strong, secure, and easy to engage/disengage. Your fingers don’t have to be in the blade channel to disengage it – a major positive given the free-swinging blade. There is variability in the amount of play I get when I lock the 451 up, but it’s never enough play that I care. The button lock also sticks to greater or lesser degrees depending on how hard you flick it. I think these are characteristics of the lock design, and not indicative of poor fit and finish or tolerancing.

In many ways this button lock reminds me of the Axis Lock. It’s probably slightly worse than the Axis, if only because it isn’t ambidextrous, but I never doubted its strength or security, and I am happy to see something in this price range without a frame lock.

Freeman 451 Flipper Review – Final Thoughts

I’m glad I got to try out the 451 flipper. It answers a question I’ve been asking for a long time: Is it a good knife? The answer is a definite yes. Would I buy one for myself? That’s a tougher call. When the 451 first came out, it was a little cheaper ($200 instead of $225), and the market was way less competitive. If you’re looking for a big high-end knife there are a lot of choices out there at or under the same cost, some with better features like S35VN steel – which you can get on the 451, but for a significant premium that puts the knife well outside of reasonable.

If I had bought and reviewed the 451 when I first learned about it, it would have my unreserved recommendation. What a difference a couple years and $25 can make! The 451 is still a competitive knife in a lot of respects. The materials are simple but very well-executed. It’s nice and light for its size without sacrificing any sort of durability. And personally, I think it’s a really cool-looking knife. I can’t say that the 451 is a must-buy, but definitely don’t ignore this knife when you’re looking for something big and bold.

I recommend purchasing the Freeman Outdoor Gear 451 Flipper at Amazon, KnifeArt, BladeHQ, or you can buy it direct from Freeman Outdoor Gear. Thanks for checking out the review.

Kershaw Link 1776GRYBW Review

by Dan Jackson 19 Comments

It has been a while since I have visited Kershaw’s value offerings. The Injection 3.0, the Emerson Collabs, and the Strobe are nice knives for the money, but I think each model left the reviewer asking for a little more.

Buy the Kershaw Link at BladeHQ

Buy on Amazon

Admittedly, these knives are all in the $20-30 range. It’s hard to get too excited at that price point as there will almost always be significant compromises. Most of the time those compromises center around the materials selected, or the company trying to do “too much” with a budget knife. At best the end result is a good, but not great, product. Rarely do you get something truly excellent although there are notable exceptions like the ESEE Zancudo or the Victorinox Cadet.

The Link was a 2015 release and is a Kershaw in house design. As I noted in my review of the ZT 0888MAX, an in house design from KAI is not a bad thing. It may not grab eyeballs like the latest Hinderer collab, but Kershaw has talented in-house designers who have hit home runs in the past including the Skyline, 888, and Knockout.

The Link is a USA made knife, and Kershaw describes this as the missing “link” between USA manufactured quality and reasonable price (get it?). They assigned the Link model number “1776” to drive the point home even further. While the in house design team may have things down, I think the marketing team may benefit from a fresh pot of coffee.

General Dimensions and Blade Details

The Link has an overall length of 7.6″, a 3.25″ blade, weighs 4.8 ounces, and is made in the USA. Although the knife weighs nearly 5 ounces, it feels lighter in hand. This isn’t a bad choice for an EDC or utility knife. It is on the larger side and may be too big for some to seriously consider as a daily carry. The Link has an almost dystopian look to it with it’s blackwashed blade and matte grey handles. It’s a nice looking medium sized folding knife.

This knife comes with either a FRN (fiberglass reinforced nylon) handle or the aluminum handle shown here. The aluminum version currently retails for around $40 while the FRN version is more at the $30 price point. Personally, the extra $10 for aluminum was a no brainer. I don’t care for the pattern on the FRN version and think it looks cheap. The dark gray aluminum handles play nicely with the black hardware and “blackwash” finished blade.

The blade of the Link is long and non-traditional, with an upswept tip and decorative swedge. It also features a perfectly executed sharpening choil. I like how the blade is ground from thin stock, and that Kershaw went with a high flat grind. The end result is an excellent slicer. I used the Link to assist with some tree trimming that needed to get done after a tropical storm. The knife was fine for pruning as well as slicing rope and twine. I have also used the knife extensively on cardboard and has always done a good job.

As an aside, Kershaw also offers the Link with a tanto blade. I think it spoils the lines of the knife, and I am not a fan of tantos for a utility knife. But it’s an option if you want it.

I think the excellent blade geometry is especially important in light of the fact that the blade steel is 420HC. I have never been a huge fan of 420HC. I don’t care if the smiths of Valeria heat treat this stuff, I have always associated 420HC with bargain bin knives. That said, the 420HC on this knife isn’t that bad. I was expecting it to crumble under cardboard, but it has held its own. Again I think the excellent blade geometry has a lot to do with this.

One benefit to a mild steel like 420HC that it is easy to sharpen. A couple passes on my fine Spyderco Sharpmaker rod and we are back in business. I’d say the 420HC on this knife is almost as good as Aus8 or 8Cr13MoV. However, I would definitely prefer some 14C28N like on the Skyline.

As Grayson points out in the comments section, it is worth noting that Kershaw has also released the Link in S35VN as an exclusive for HouseofBlades with red or blue anodized aluminum handles. It clocks in at $80, and may be worth the premium in price of you like the design. Here’s to hoping Kershaw will continue to offer the Link in different steels. I think that if the S35VN version wasn’t a dealer exclusive then it would probably retail for closer to $60. That would be a great deal.

BladeHQ also offers a damascus version of the Link. It’s not clear what kind of steel the damascus is made out of, but if you like damascus then this could be an option.

Handle, Ergonomics, and Pocket Clip

As I have previously mentioned, this is an anodized aluminum handle over stainless steel liners. There is a black ribbed backspacer that runs 3/4 the length of the handle. The fit and finish on this knife is excellent. It is far superior to the Chinese Kershaws I have previously reviewed. While not 3-D contoured, the handle has been chamferred twice for comfort and visual interest. The parts line up perfectly, the screws are all set the same depth in the handle, and there are no machining marks. Even the lanyard hole has been thoughtfully executed: it is oversized and inset into the pommel rather than simply drilled through the handle. Nicely done, Kershaw.

The Link is a comfortable knife to work with. It’s thick without being chunky, and there is a great natural thumb rest on the back of the handle. If you need to you can choke up further on the spine of the blade, but there is no jimping. The anodized aluminum isn’t what I would call “high traction”, but it’s not slippery either. There is plenty of room for a full grip, the flipper forms a nice forward guard, and there are no sharp corners to speak of. Kershaw managed to do a lot here with a modest budget. I think most people will be pleased with how the Link feels in hand.

The clip is a black parkerized steel clip. The handle is drilled for ambidextrous tip up carry. This isn’t a deep carry clip, but the Link is still discrete thanks to its dark handle and nondescript pocket clip. This is a heavier knife with a relatively smooth handle, so I was concerned about the knife moving around in my pocket. Thankfully, this clip provided plenty of retention and the Link remained in place. It’s hard to get too excited about a clip like this, but that is not a bad thing. Thankfully, Kershaw didn’t do anything weird here.

Deployment and Lockup

The Link makes use of Ken Onion’s SpeedSafe technology. I have the better part of a dozen SpeedSafe knives over the years and you can check all the SpeedSafe reviews out here. Suffice it to say, this is a long standing and proven assisted opening mechanism. My knife fires hard and fast thanks in part to a well placed and nicely jimped flipper tab and phosphor bronze washers. All things equal I almost always prefer a non-assisted manual action flipper, but given the price point I don’t mind this assisted opener. It works great.

Also, it is interesting to note that there is no rattle of the spring when the blade is open. Typically these SpeedSafe knives rattle a little, although you can always fix that by opening up the knife and applying a little lithium grease to the spring. My Link is dead quiet, so maybe Kershaw has found a way to address this issue at the factory.

The Link comes with a stainless steel liner lock. Lockup is solid and without play. I have always been a fan of liner locks, and the lock on this knife works well. The lock bar is easy enough to get at when you want to close the blade. Here is a shot of the Link next to my Skyline:

Blade centering is near perfect on my knife.

Kershaw Link Review – Final Thoughts

This is one of Kershaw’s better budget offerings in recent memory. It seems like historically their best stuff has been the USA made Kershaws, and the Link continues the path forged by knives like the Skyline, Blur, and Knockout. I’d say the Link is on par in terms of quality, but it remains to be seen if the knife will develop the following these other blades have. The Link is a little chunkier, but not bloated. It’s also kind of a funky design, but it works well in hand. For these reason I don’t think the Link will garner the same legacy these other knives have, but it’s still a very good knife.

Kershaw is also releasing limited editions of the Link, which demonstrate that it is popular with consumers, and adds an element of collectibility to the knife.

I think most people who are attracted to the Link on paper will like the knife. It’s a solid tool that you won’t mind dragging underneath a car, or up a ladder. The fit and finish is excellent. The materials are good, although I’d like to see an upgraded blade steel (addressed with the limited editions, but at double the price of the regular version). I understand that probably wasn’t possible given the price of the knife and the rest of the features.

On the subject of price, if you like the look of this knife but want something higher end, you may want consider the Zero Tolerance 0095BW. The 0095 shares the design language of the Link, but with a manual flipper, bearings, S35VN steel, and a titanium handle.

If you are interested in the Link then I think you will end up liking it. I recommend it to those seeking a solid work knife that is made in the USA and retailing for well under $50.

Kershaw Link Folding Pocket Knife, Gray Blackwash, SpeedSafe Opening, Made in the USA

Retractable steel blade has carbon and chromium for strength and corrosion resistance. BlackWash finish creates worn look that hides scratches and prints
As Kershaw’s patriotic model number 1776, the Link is made to be the best collectible utility knife of its kind
For accessibility and safety, Link has a reversible pocketclip, liner lock, SpeedSafe assisted opening and built-in flipper
With closed length of 4.4 inches, Link is the go-to tool when scouting, hunting, fishing or working around the home or office
Both sharp and sturdy, the Link is discrete with one-handed opening for personal defense or protection during lifesaving emergencies

I recommend purchasing the Kershaw Link at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Kudu Review

by Chad McBroom 6 Comments

Last Updated: August 3, 2019
There is a knife in South Africa known as the Okapi. Originally produced in Germany in the early 1900s for export to the German colonies in Africa, the trademark and tooling was purchased by All Round Tooling (aka Okapi South Africa) in 1988 and all production moved to South Africa. Made from high carbon or stainless steel, the Okapi is known as a workman’s knife due to its price and availability. For the same reasons, the Okapi is quite popular with the criminal element in South Africa.

Buy the Cold Steel Kudu at BladeHQ.

Buy on Amazon

The fighting systems of various peoples are always influenced by external factors. (I discuss this in detail in my book, Solving the Enigma: Insights into Fighting Models if you would really like to delve into this topic.) One of those influencing factors is weapon technology. The defects in the Okapi can be seen through the Cape Knife Fighting methods used by the criminal element of South Africa.

The Okapi has an unreliable ring-lock locking system and a dull blade that refuses to take or hold much of an edge. As a result, the knife is used in a reverse grip with the edge facing inward. Holding the knife edge inward ensures that in the event the lock fails, the blade will not collapse onto the user’s fingers. The blade is used to deliver ripping stabs since slashing and cutting strokes are rather ineffective.

Lynn Thompson of Cold Steel has a reputation for taking historical weapon and blade designs and reworking them with modern materials and Cold Steel technology to turn them into fully functional and virtually indestructible renditions of their ancestors. That is exactly what Cold Steel did with the Kudu, their reconstruction of the classic Okapi.

General Dimensions and Blade Details

The flat ground Kudu blade is constructed out of German 4116 Stainless Steel. Unlike the Okapi, the 4 ¼” blade of the Kudu is razor sharp right out of the box. The blade is thin in the tradition of the original Okapi, measuring at only two millimeters thick, and has an image of a kudu (a species of South African antelope) printed on the blade. The blade is most likely stamped out and then ground in the fashion of many Swiss Army Knives, rather than CNC machined, which gives it a little bit of a third-world feel to it. The blade is perfectly centered, but there is a bit of side-to-side play which is most likely due to the type of spacers used.

The entire knife is a whopping 10 inches long—not a small knife by any means. Lynn Thompson likes big folding knives and it shows that he did not take any exception with the Kudu. This knife is surprisingly light, however. At only 2.4 ounces, this knife feels like a feather in the hand.

The clip point blade of the Kudu is extremely sharp out of the box. I did some quick paper cutting tests with it and it performed superbly. Not having a lot of experience with Krupp 4116, I had to do a little research on this particular steel’s properties. Although all of the Internet commandos have their own opinions, but as far as metallurgy is concerned, 4116 is a modified form of 420C and is said to be on par with 440C for edge retention characteristics, but has a better corrosion resistance than 440C. So far, I would have to say that the Kudu’s edge retention has been pretty close to most of my 440C blades.

Handle, Ergonomics, and Carry

The curved handle of the Kudu is made from what appears to be two pieces of black zytel (Zy-Ex) fused together to form one piece. With the exception of the pivot pin, all of the handle hardware is external. The handle has a decorative metal kudu horn inlaid into the left side and a wood grain texture.

The faux wood grain texture on the handle adds to both the appearance and grip of the handle. The lack of any type of finger grooves means you can extend or choke up on the grip without any discomfort; however, with the absence of any kind of guard or quillon, this is not a knife that you would want to use for stabbing.

The Kudu does not have any type of pocket clip to facilitate carrying (Man, have we gotten spoiled or what?). The handle of the Kudu is so long that it actually carries fairly well in the back pocket of a pair of jeans, or in the front pocket along the seam. For an average size person, the ring will actually rest at the top of the pocket. Allowing the ring to sit just outside the pocket will put the knife within easy access.

I performed some testing on the locking mechanism to see just how reliable it is. I gave it five solid spine whacks and five radius hits just below the tang. The blade remained solidly locked with no signs of compromise. I have no doubt the ring-lock on this knife is solid and dependable.

Deployment and Lockup

Kudu deployment requires two-handed opening using the thumbnail groove on the blade. Like the Okapi, the Kudu has a ring-lock, but one that actually works. For those who may not be familiar with this type of locking mechanism, a ring-lock is similar to a back-lock in function, except instead of pressing down on the back of the locking bar (rocker bar) to release the lock, you pull up on a ring near the front of the locking bar. Also, with a lock-back, the locking bar is inside the frame and fits into a cutout in the tang and locks the blade, whereas with a ring-lock, the locking bar is external and has a cutout that a notch in the tang fits into to lock the blade. Of course, this type of ring-lock system is completely different from the ring-lock system used by Opinel Knives, which involves rotating the bolster.

The lockup on the Kudu is quite strong. It takes some effort to disengage the locking bar. Again, for those not familiar with a ring-lock, there is some technique involved in closing this knife. Failure to use the proper technique could wind you up in the emergency room having your fingers stitched back together. To close the Kudu, you place your index finger through the ring and brace your thumb against the spine of the blade, then pull the ring and push against the blade. The tang of the Kudu has several notches that act as safety stops to prevent the blade from closing too quickly, but it is still important to keep your fingers clear of the blade’s path.

There are some techniques for modifying the Kudu to open and close a little smoother, but I will not discuss them here since this is done at the cost of some of the knife’s locking integrity. An interesting side note on deployment is that South African gang members will carry the Okapi partially open in the back pocket so that when it is pulled out by the handle, the tip of the blade catches on the seam, in the fashion of an Emerson Wave, and opens the blade. This works because of the dull blade and weak spring of the Okapi. If you tried this with the Kudu, you would end up with a partially opened knife and half of a back pocket.

Cold Steel Kudu Review – Final Thoughts

The Cold Steel Kudu is not a high-end tactical knife by any stretch of the imagination. It is well designed and well built, but it does feel cheap—because it is cheap. The Kudu retails for $9.99, but can usually be picked up for about $6.00. For a utility knife that can be used in the kitchen or thrown in the bottom of a tackle box, the Kudu is hard to beat on price alone. It blows away any knife you might buy at your local retailer for even double its retail price.

I typically carry high-quality, hard-use tactical knives on a daily basis since my primary purpose for an EDC knife is self-protection. With that being said, the Kudu will definitely not become my new EDC knife as it is neither designed to be nor intended to be a tactical knife, but I will definitely be throwing one in my utility drawer and probably one for a spare blade in my bug-out bag.

Cold Steel 20K Ring Lock Folding Knife

Kudu features a highly rust resistant and beautifully mirror polished stainless steel blade
handle is made from durable glass-reinforced Zy-Ex and has an attractive wood grain texture
The Kudu is amazingly lightweight, versatile and functional
The blade is 4-1/4-inch Overall dimensions 10", 2MM thick. Weights 2.4 oz.
For safety, the Kudu¿ has been thoroughly. The locking mechanism will hold the blade rigidly

I recommend purchasing the Cold Steel Kudu at Amazon or BladeHQ. Thanks for reading.

Fantoni Dweller Review

by Dan Jackson 15 Comments

Last Updated: July 30, 2019
I have been holding out on you guys. Several years ago I purchased what is arguably my all time favorite gentleman’s folder, and have yet to write a review on it. That is, until now.

Buy the Fantoni Dweller at KnifeArt.com

I’m talking of course about the Fantoni Dweller. This is is a knife that I fell in love with after watching Stefan Schmalhaus’ excellent video review. He is the man when it comes to reviewing dress knives, and I think that his video review of the Dweller is among his best work. If you haven’t checked out his review before, then you owe it to yourself to give his short video your attention:

After watching a video review like that there isn’t much left for someone to say about the Dweller. This is part of the reason why I have remained quiet for so long, but I’ll try my best to give you my take on this knife.

This is a riff on the Bob Loveless City Knife, which is a fixed blade pattern. I believe Fantoni made a similar knife for Lone Wolf in the early 2000s, with bolsters and no finger choil. This version was designed by Massimo Fantoni. Massimo is the son of Renzo Fantoni, the founder of Fantoni Knives in Italy. Massimo is perhaps best known for designing the Nilte Quiete. I have had the pleasure of meeting with Massimo and Renzo at several Blade shows over the years. They are great guys making some of the best production knives in the world.

The only problem with Fantoni Knives is that they produce their models in limited quantities. Their stuff is hard to acquire unless you are vigilant. KnifeArt is Fantoni’s exclusive U.S. dealer, but their selection is touch and go based upon Fantoni’s production schedule. For these reasons Fantoni doesn’t get a ton of press here in the States. This is a shame because their work is immaculate and they have fantastic designs. Their CUT Flipper remains one of my all time favorite production pieces. The Dweller isn’t far behind.

General Dimensions and Blade Details

The Dweller has an overall length of 6.5″, a 2.6″ blade, and weighs 1.8 ounces. The Dweller is made in Maniago, Italy. In my opinion this knife is the perfect size for EDC or carry as a gents folder. Some people may get bent out of shape about the blade to handle ratio. The blade is notably and purposely smaller than the handle. Personally I find that aspect of the design charming. I don’t typically ascribe to golden ratios or metrics when examining a knife. These metrics can be useful and interesting, but I like to explore each knife on the merits.

Here, I find the short blade endearing. It’s a big part of what makes the Dweller so unique and whimsical. Plus it’s still practical. This knife is non-threatening and elegant. No one is going to mistake the stubby blade of the Dweller for a weapon, yet it is still perfectly suited for opening mail, trimming loose threads, and handling mild food prep chores like slicing an apple at lunch, or preparing a cheese plate after work. You know, the stuff gentlemen do. And despite the smaller blade there is still plenty of handle, so the user gets the benefit of a full grip when using this knife.

The blade is a short modified drop point with a full flat grind. It is ground like a traditional slip joint, meaning that it is thin behind the edge and slices well. The tip is fine, and represents a good balance of strength and precision. The blade has been given an attractive satin finish. All around this is a practical and nicely executed blade for a little folding knife.

Fantoni went with Sandvik 19C27 steel for the Dweller. I haven’t had a lot of experience with 12C27 outside of the Dweller. Sandvik advertises this as their most well-rounded knife steel. My research suggests that Fantoni has heat treated their 19C27 all the way up to 61HRc.

The 19C27 takes a nice edge that holds up well and is easy to maintain. I have had zero issues with rust or corrosion, despite carrying and storing the Dweller in a leather sheath in Florida for years. I have also used the knife on all manner of acidic fruits. While 19C27 isn’t a super steel, its a good practical choice for a small slip joint. No complaints.

Handle, Ergonomics, and Carry

The Dweller’s handle is wood scales over brass liners. This is a slip joint, and the stainless steel backspring doubles as a full backspacer. As with all of my other experiences with Fantoni, everything is put together beautifully. I especially like the fact that this slip joint is bolted together rather than pinned. That means the pivot is adjustable and the handle scales are fully removable with a tiny torx driver.

My particular knife came with Snakewood covers, but Fantoni offers this knife in a variety of different exotic wood handle scales, including Olive, Burl, and Cocobolo. I like Snakewood because of the warm color and interesting figuring. Although my particular handles don’t have much of a “snake skin” pattern it’s still beautiful. I have also seen the Dweller offered in Micarta. My preference is for a wood handle as that compliments the gentleman’s folder vibe of this knife nicely.

The Dweller features a generous handle. It dwarfs the handle of the Cadet, and also features a small forward finger choil that allows you to choke up on the blade. Either way there is plenty of room for a full grip, even if you take a large glove like I do. Being a gents folder there is no jimping to speak of. The wood handle is not slippery, but this is not a high traction handle either. I have used my Dweller for tasks ranging from cleaning my finger nails to breaking down boxes. It isn’t a combat folder, but should handle most urban daily carry tasks without issue.

The Dweller does not come with a pocket clip, and instead is shipped with a thin leather slip sheath. The sheath is made of a rich chestnut colored leather that matches the Snakewood handles on my knife almost perfectly. What I like about this slip sheath is that it is thin and small. The sheathes that came with both my Mnandi and Indian River Jack, while nicely made and serviceable, are both notably larger than the sheath of the Dweller. That is because the Dweller’s sheath is custom made to the knife, while the knives for the IRJ and Mnandi were designed to accommodate other knives as well. Over time my sheath has broken in and burnished, which added to the character of this knife.

Walk and Talk

This is a slip joint, so my usual discussion of “deployment and lock up” more or less goes out the window. For “deployment” we have a single nail nick. The spring on this knife isn’t particularly strong. I’d say the pull strength is a 3 or 4 and is comparable to my Cadet.

The nice thing about the Dweller is that it has a great little half stop. I am a big fan of half stops, and it works well on the Dweller. The blade does not lock open, but it is secure. There is no blade play. If you are smart about how you use this knife you can get a lot of use out of it despite the lack of a lock.

Centering on my knife is a off by a millimeter. The pivot appears to be a bushing style pivot, so I am guessing I could adjust it to center, but haven’t tried because it hasn’t bothered me.

Here is a shot of the Dweller next to another rock star gent’s folder, the CRK Mnandi:

Fantoni Dweller Review – Final Thoughts

I almost feel bad waiting so long to write this review. I bought this knife for my personal collection, and have enjoyed it for several years now. While many knives have come and gone over the years the Dweller is something I don’t see myself ever parting with. I love the simple design rooted in Bob Loveless’ timeless aesthetic. The stubby blade is charming and practical, the wood and brass handles are warm and inviting, and the superb execution of the knife and pocket sheath elevate the Dweller to something special an unique.

While it may not be the fanciest gentleman’s folder, the Dweller’s simplicity and restraint make it one of my favorites. This is a beautiful knife, but it is still humble. This is a dress knife that I can actually use without regret. Some gent’s folders are so nice that they are almost objets d’art, and I feel guilty when using them. I don’t get that feeling with the Dweller. It’s a nice little knife, but it’s also unmistakably a tool.

Unfortunately, the Dweller has become exceedingly rare over the years. A search of “Fantoni Dweller” on the BladeForum’s buy / sell / trade section yielded zero results. Buy it if you can find it.

I would recommend buying the Dweller at KnifeArt, as they are Fantoni’s only US dealer. The only problem is, they don’t have the Dweller currently in stock. You may be able to find them on the secondary market. Regardless, please consider that purchasing anything through any of the links on this website, including links to Amazon and BladeHQ, helps support BladeReviews.com, and keeps the site going. As always any and all support is greatly appreciated. Thank you very much.

Hogue EX-F03 Review

by Grayson Parker 9 Comments

Last Updated: August 26, 2019
Hogue is something of an odd brand in the knife industry. Despite their award winning designs, the Hogue line has never really caught on with the majority of the knife community. It could be that they produce button locks whereas consumers [think that they] want framelocks. Or perhaps the market is too caught up in the frenzy over flippers. Whatever the reason, Hogue is a company that rarely gets the praise or online attention it deserves.

Buy the Hogue EX-F03 at BladeHQ

Buy on Amazon

Like its brethren, the EX-F03 is not a trendy knife. Pictures of it won’t clog your Instagram feed. BladeHQ won’t generate a feeding frenzy by announcing a shipment of EX-F03’s has arrived. It certainly won’t scratch the itch behind the EDC top and the torq bar. At the end of the day, it’s a working knife in a market driven by collectors and aficionados. As a collector (and a nonstop fidgeter) I’m guilty of both sins. Whatever the case, the EX-F03 seems to have slipped under the radar. Hopefully this review remedies that.

Before the review really begins in earnest, there’s a bit of a cautionary tale/PSA I should share. Always check state and local laws before purchasing a knife. CA Penal Code 21310 forbids carrying a concealed “dirk or dagger,” which I belatedly discovered applies to all fixed blades. It cuts me deeply that I can’t carry a knife that I [spoiler alert] really like outside of my home. What really twists the blade is that this was a gift from my girlfriend. I’d like to say that it being a gift hasn’t affected this review, but she reads my work here, and I’d rather keep my blood inside of my body.

General Dimensions and Blade Details

Out of the sheath, the Hogue EX-F03 has a cutting edge of 2.25”, an overall length of 5.5”, and a weight of 2.1 oz. In the sheath, the knife is 6.5” long, 2.5” wide, and weighs just under 4 oz. The blade stock is .16” thick. Judging by size alone, the design intent of the EX-F03 is a small utility blade. It’s also available as a dedicated belt knife, which includes a screw-on handle with a karambit style ring incorporated. Of note is that the aforementioned belt version includes the neck sheath as well. Both handle styles of the EX-F03 are available with a hawkbill blade, if you’re so inclined.

The EX-F03 has what Hogue calls a clip point. It doesn’t look like any clip point I’ve ever seen, but one thing’s for sure: the folks at Hogue know how to manage a grind. It’s even and crisp, and the blade stock is thin enough that it cuts well. The blade is a bit short for food preparation, and I’ve learned the hard way that stubby blades can be hazardous at times. Pro tip: don’t try and slice a palmed apple with something this size. It doesn’t end well.

At first I thought the tip was too thin, but some pretty extensive use has shown me the error of my ways. It’s not as durable as an ESEE or a Becker, but I found the thin tip perfect for working with tough materials that tend to bind, such as foam board. Conversely, I was a big fan of the continuous belly on the EX-F03 in theory, but in practice it tends to slip out of the aforementioned tough cutting mediums. Not that it’s a poor cutter – quite the opposite – but some finesse may be required.

Here is a picture of the tip of the EX-F03 compared to the Paramilitary 2:

Hogue uses 154CM for most of their blades. It’s a steel I prefer on any serious work knife, as its blend of toughness, edge retention, rust resistance, and ease of maintenance make it well suited for any given task on the job site. It doesn’t shrug off abuse like 1095, but it doesn’t chip near as often as S30V. Regular stropping keeps the edge keen, and I’ve never had a problem with tarnishing or rust spots. This particular knife has been used on drywall, cardboard, and more than a few clamshell packages without any problems. The true sharpening choil makes for headache-free maintenance. And yes, it did all of this:

Handle and Ergonomics

The EX-F03’s skeletonized construction is as simple as you can get. As such, the EX-F03 really has only one problem: it’s too thin. Yeah, I know. Go figure. Remarks from Captain Obvious aside, without the presence of some contouring, harder cuts press the tang into the palm, which in turn generates some discomfort. That said, I’m looking for a knife that fits into my pocket comfortably, and the extended grip is too long for that. If you have access to some basic tools, you could theoretically purchase the full version and grind off the ring (Allen Elishewitz spoke about doing just that). Bear in mind, that sort of action will void your warranty.

All that said, I like the overall design. It’s a 3-finger grip, but the included lanyard gives your pinky something to hold onto. The curves of the handle, although thin, nestle organically into the palm. And I have to hand it to Hogue’s machinists: they made a bare piece of steel as comfortable as they could. Everything is chamfered and polished. The jimping is hands-down some of the nicest I’ve experienced, with thick, rounded ridges that lock your thumb in place without generating hotspots.

It all boils down to intended use: if you want to carry a fixed blade in your pocket (rather than on your belt), chances are you value discretion and ease of carry as much or more than the ergonomics. If you do need a blade that can handle prolonged use, it’s probable that you can carry said knife on your belt without rubbing anyone the wrong way.

Sheath

The sheath of the EX-F03 is truly sublime. Apart from a loose rivet – which Hogue fixed promptly – I have no complaints. If you keep up with Gear Geeks Live, you’ll have an idea how rare that is. There is a firm snap upon sheathing and unsheathing the blade, and no wiggle in any direction while stored. It’s made of Boltaron, which is similar to but slightly tougher than Kydex. I own a couple custom fixed blades and have handled my fair share of productions, and this sheath outclasses all of them. Through some witchcraft, it’s bidirectional and accommodates both blade shapes. One slight downside: you can (with some effort) pop the sheath off with your thumb, but for me it’s mostly a two-handed affair. I don’t know if that’s a deal breaker for some, but I don’t mind.

As shipped the EX-F03 is a neck knife. While I’m reasonably certain that it would serve well in such a role, I don’t work in an environment where that would be appropriate. For the sake of due diligence, I wore it around my neck once or twice, and it worked fine. Deployment was easy and the cord was comfortable. Even so, the cord was removed at the earliest opportunity. To my delight I found that the EX-F03 carries wonderfully in the pocket. The sheath is wide enough that the blade doesn’t roll or bind in the pocket, and rounded enough to fit into a variety of pants without issue. On a few weekend trips up into the woods, I wore it on my belt with a spare Tek-Lok I had lying around, and it worked fine. The dedicated belt sheath is clearly superior, but in a pinch this did the trick.

Hogue EX-F03 Review – Final Thoughts

All told, the EX-F03 is an impressive addition to the Hogue line. By now you should be able to tell I’m overly picky, so of course my jimmies will be rustled by the little things. (Hell, if you don’t see a complaint, call the authorities. It may be a cry for help.) The few flaws present are honestly quibbles, and can’t hold back what I think is a strong competitor in the world of fixed blades.

Speaking of competition: the price point of the EX-F03 is a major departure for Hogue. Typically their knives clock in at $150 and up, but this configuration of the EX-F03 costs just under $70.00. Some may still consider this expensive for a small fixed blade. Depending on what extras you want, the ESEE Izula falls at a similar price point, but I think the costlier steel and stellar sheath are well worth the price of admission for the Hogue.

If you’re looking for a pocket fixed blade, you should start here. Much like traditional knives, a good carry option determines if the knife in question actually gets pocket time. In this regard, the EX-F03 is unmatched. I couldn’t fault anyone for looking elsewhere, and the competition is very strong, but the sheath of the EX-F03 is so well-suited to pocket carry that it at least should be part of the conversation. Whether you’re a veteran to the world of fixed blades, or a green recruit, I can wholeheartedly recommend giving the EX-F03 a chance. If you live in California, well…shell out for the belt sheath. I’ve heard good things.

Hogue 35370 EXF03 Neck 2.25" Knife, Clip Pt., Tumble Finish, Black Sheath

Package length: 2.4 cm
Package width: 7.2 cm
Package height: 17.0 cm
Product Type: SPORTING GOODS

Editor: If you are thinking of buying a Hogue EX-F03, please consider purchasing it at Amazon or BladeHQ. Thanks for reading.