Collectable Knives

DPx Aculus Review

The first time I noticed a gear company use the words “executive protection,” I was browsing the Goruck website. I was in the market for a backpack (my Jansport had succumbed to a combination of heat, dirt, and heavy loads) and saw that Goruck had recently released a sleeker bag that was stripped of the exterior MOLLE webbing. Their product literature claimed that these design changes were meant to appeal to individuals working in high-end private security. While I thought the justification was a little silly, the design was still attractive to me – all the moreso because I am (contrary to what you may have heard) not working in executive protection.

Some time passed, and I had entirely forgotten about it. Then it cropped up again: Triple Aught Design had finally gotten around to releasing a pair of jeans, but marketed them to the corporate security crowd. I can tell you from personal experience that the jeans are awesome, but again the marketing was confusing.

Enter the DPx Gear Aculus: another lust worthy piece of gear that was apparently designed with undercover operations in mind. While I can’t speak for its effectiveness in that regard, I can tell you that it’s what I would expect Robert Young Pelton’s version of a “gentleman’s knife” to look like. If you believe the rumors, the Aculus was first designed on a napkin – though with R.Y.P.’s reputation, that doesn’t sound like a tall tale. The design was then licensed to LionSteel, who produced it as the TiSpine. Under the terms of the agreement, DPx would sell the Aculus in limited quantities and only sell it directly from their website.

DPx sells the Aculus as their “gentleman’s knife”; and, compared to the rest of their product line, that makes sense. However, when you are not comparing it to blades that are ¼” slabs of tool steel, that claim falls apart. I can’t presume to be a gentleman, but I’ve found myself in a suit on a few occasions, and none of them were situations where a knife like the Aculus would be appropriate. Does that mean that the Aculus is a bad knife? Far from it, but there are some caveats you need to be aware of.

General Dimensions and Blade Details

The Aculus has a blade length of 3.35”, a closed length of 4.33”, and weighs 3.53 oz. Overall, it’s a bit smaller than a Spyderco Paramilitary 2, but has a cutting edge about as long. Although I can’t quite see the resemblance to a scorpion tail (the namesake of the knife), I have to admit the blade shape is very attractive. There is plenty of belly, but not so much that the blade slips during fine cutting tasks. The swedge takes away a moderate amount of steel—not enough to compromise the tip geometry, but certainly enough to help with piercing tasks. It adds a nice aesthetic touch to boot.

Sadly, that durability makes the Aculus a poor slicer. It handled cardboard just fine, but food prep was challenging. This was disappointing, as picnic lunches seem to be one of the few true occasions where a “gentleman’s knife” is warranted. For some reason I had always assumed the Aculus featured a hollow grind. While that wouldn’t make it an insane cutter, it would be a big help. If you have an Aculus and feel that the blade is too thick behind the edge, I’d look into having it reground. However, that’s assuming that you do a lot of slicing. Many of today’s cutting tasks are just that: cutting. Breaking down boxes, opening packages, and other utility jobs don’t often require a thin blade, and in some cases it can even be a liability. As for me, I use my knives at lunch frequently and would prefer a hollow grind.

This was my first experience with Niolox steel, and online research provided confusing and often contradictory information. In this iteration, the steel was very impressive. I used the Aculus to prepare food, break down cardboard boxes, and even shave some drywall. It handled everything I threw at it, kept a working edge for a long time, and stropped easily. From what I saw online I expected corrosion to be an issue, but that hasn’t come up. DPx loves their tool steels, and I can’t see any reason why they shouldn’t.

Handle, Ergonomics, and Carry

Of course, the handle is the draw of the Aculus. Integral frame locks (especially at the production level) are technical marvels and a sign of how far the cutlery industry has advanced in recent years. DPx and LionSteel knocked it out of the park. The diamond pattern is striking – almost like corrugated steel brought to a high polish. Between the attractive curves, slight contouring, and aforementioned machining, the Aculus is quite pleasant in the hand. The handle is a bit slim, but the traction from the 3-D machining makes up for that. It’s comfortable in just about any grip, including when the knife is closed.

The Aculus is slim, contoured, and features an over-the-top pocket clip. Said pocket clip meets the butt of the handle at an angle, and while it does increase the rate of pocket wear in jeans, it nestles pleasantly in slacks and suit pants. Honestly, the only complaint I can make about the clip is that DPx etched their skull logo on the clip. I’m not one for logos, especially on a knife that’s supposed to be unobtrusive. It’s not that the logo is garish or without charm; it just feels out of place. I’d like to see the same approach they take with the ‘Triple Black’ series applied here, where most of the branding is hidden or left off. Robert Young Pelton’s design motif speaks for itself – you won’t mistake his style for someone else’s.

Deployment and Lockup

After doing some research on the internet, I was under the impression that the Aculus was – despite the cut out for the thumb – a two-handed opening knife. For the first three weeks that I had the Aculus, it was tricky to open it with one hand. It wasn’t until I saw a video on DPx Sean’s Instagram page that I realized the Aculus could actually be ‘coin-flipped’ open. Opening it that way is a little unintuitive, but once you get the hang of it it’s pretty easy, even addictive. I don’t know if that’s something I would recommend on a knife this nice, but if the folks at DPx can get away with it, I think the end user can too.

Throughout the testing period, the lock-up was fine. I didn’t have a problem with a sticky lock (which has plagued other DPx models) and the lock-up is stable at 70%. There is no blade play in any direction, and I never thought it would give. Still, integrals make me nervous. I can’t help but feel that if something goes wrong, you are up a certain creek without a paddle. A lock-bar insert (as featured on the LionSteel SR-1) would do a lot to put my mind at ease, but for whatever reason one wasn’t included here. Because of this, I have trouble with the “hard use” moniker. Bear in mind DPx has a stellar warranty service, so my fears are likely unwarranted.

DPx Aculus – Final Thoughts

I can’t refer to this as a “gentleman’s knife” or a “hard use” knife, much less both. The former because there is really no use for such a tool at an academic conference, at a cocktail party, a political function, or a courtroom. In some of those cases the Aculus would even be confiscated on the way in. If you’re the one doing the confiscating (for instance, working private security), then you probably need this knife for reasons that a twenty-something graduate student can’t relate to. As for the “hard use” claim, I’m skeptical enough of normal frame-locks in that role. Besides, the Aculus is really too pretty to shunt into rough tasks.

For modern knife enthusiasts, the Aculus pushes a lot of buttons. It is fun to fidget with, easy to carry, and drop-dead gorgeous. It doesn’t slice very well, but for most people that won’t be a big deal. Ultimately, even though the Aculus isn’t a “gentleman’s knife,” or a “hard use” knife, it’s quite impressive and undeniably attractive. For collectors and folks that don’t mind thicker blade grinds, I’d recommend this knife. However, if you regularly use your knives for food prep, this is one you might want to pass on. In either case, I’m excited to see what DPx will do in the future, even if I have to endure a bit of unnecessary marketing.

DPx Aculus – From $350.00
From: dpxgear.com

Note: The Aculus has been discontinued, so if you are looking to buy one at retail I think you will have a hard time. You may be able to snag a used one off the forums. I recommend buying other DPx knives at Amazon and BladeHQ. Please keep in mind that purchasing anything through the links on this website helps support BladeReviews.com. Thank you very much!

Editor’s note – having reviewed the TiSpine myself, I thought it would be fun to get Grayson’s take on the Aculus. I think he makes some valid points. Not my first choice for a gent’s folder, or a hard use tool, but it’s undeniably a beautiful knife and a marvel of engineering and craftsmanship. Well worth considering if you are at all intrigued by the design.

Southard Knives Tolk Review

by Dan Jackson 5 Comments

Midtechs. If there was a single thread that bound Blade Show 2015 together for me, that thread would be midtechs. Specifically, midtechs offered directly from custom knife makers.

Midtechs are nothing new, and have been in the knife enthusiast’s vernacular for several years now, although it is admittedly a fuzzy term to define. But at the 2015 show it seemed like any custom maker worth his salt had a mid tech offering of some sort, and whenever I gathered with fellow show-goers it seemed like everyone had acquired at least one midtech at the show.

I don’t think this is a bad thing. I think this is an attempt to resolve an interesting problem in the market. Custom “tactical folding knives” are as hot as they ever were, and still show no sign of slacking off. While the concept of production company collaborations with custom knifemakers is nothing new, it seems like the bulk of the profits go to the manufacturer, and depending on the collaboration the knifemaker’s design is limited by the budget for the production knife. In some cases the result can be spectacular, but the flip side is that the product might be a watered down design with sloppy fit and finish, and inferior materials.

The advantages of producing a direct to consumer midtech is that the knife is more accessible than a full custom, allows the knifemaker to exercise greater control over materials and production quality, and builds in a bigger margin for the maker by virtue of the offering being higher end and the lack of middlemen. In a typical collaboration model with a big brand the production company takes a cut, the manufacturer takes a cut, a wholesaler takes a cut, then a retailer takes a cut. There isn’t much meat on the bone left for the designer.

But now it is possible for a custom knifemaker to essentially private label high end production knives, and offer them directly to the consumer. 10 years ago the technology wasn’t there to make this a viable business model. Today, the midtech model clearly has legs, and you don’t need a crystal ball to predict we will only see more of these hit the market – especially as custom makers take their designs overseas and offer there wares at lower and lower price points.

I was not immune to the powerful draw of the midtech phenomena, and ended up walking off the show floor with this Southard Knives Tolk midtech. Let me start by saying that Brad is a hell of a guy, and was a pleasure to meet and deal with. His custom offerings are among the most popular at the show, and between that and his tremendously successful collaboration with Spyderco might make a lesser man aloof. Not the case with Brad. He was warm, approachable, and it was clear he was proud of this midtech offering. I am happy to offer up this review today.

General Dimensions and Blade Details

The Southard Tolk has an overall length of 8.75″, a 3.87″ blade, weighs 4.7 ounces, and is made in the USA. This is the second midtech offering from Brad, the first being the Avo. He is dubbing his midtech line the Performance Series. The Tolk is a big knife with it’s near 4″ blade. Definitely a bit outside of what I usually gravitate towards, but given the length of the knife I will say it is lightweight and manageable. This could be an every day carry (EDC) piece for some folks. For me it’s a collectible.

The hump backed blade of the Tolk is reminiscent of the Spyderco Southard Flipper, and has been given a high flat grind and a bright satin finish. Brad also offers the Tolk with stonewashed flats if you care for a little more contrast. Blade thickness is about 3.5mm, which is generous for a thin profiled folder. There is a decent amount of steel traveling out to the tip, and the blade is thinly ground. There isn’t much belly and I find that the Tolk is well suited to slicing.

Southard went with CTS-XHP stainless steel for the blade. This is a proven steel in my book and I am happy to see it on this premium offering. I must confess that my Tolk has not seen a ton of pocket time (or cutting time). It has held up well under the light use I have put it through.

Handle, Ergonomics, and Pocket Clip

The Tolk has a full bead blasted titanium handle. Subtle grooves have been milled into the face of the handle while deep lightening pockets have been milled on the inside. The hardware on this piece is especially interesting, with the show side featuring a decorative pivot and decorative hardware. The non-show side has a high domed pivot and oversize body fasteners. Rounding things out are blue anodized titanium standoffs. They compliment the lockbar stabilizer and thumb studs nicely. Fit and finish is everything I would expect from a high end custom knifemaker like Brad. The knife is highly refined.

I like the way the Tolk feels in hand. This is a generous knife and my fingers had no problem spreading out over the curves on the handle. Like a Cadillac sedan, there is room to spare, and the chamferred edges sink into your palm like a velour seat. The spine jimping stands in sharp contrast – literally – to the rest of the handle. It is aggressive and toothy. It is not as bad as the jimping on the SnG, but under sustained use it will irritate the skin. The jimping on the butt of the blade is even more aggressive, but since I rarely if ever use my knives in reverse grip I view it as decoration more than anything.

The pocket clip is relatively pedestrian compared to the rest of the knife. It is a simple bent titanium clip, and it integrates nicely with the handle. It is drilled and tapped for right side tip up carry only, and there is a recess milled into the handle like an XM-18 or Large Sebenza. The clip of the Tolk has good retention and is set up for relatively deep carry. It carries well in the pocket and is thin and manageable given its length.

Deployment and Lockup

The Tolk is equipped with both a flipper and ambidextrous thumb studs. The thumb studs are set close to the handle and I am unable to use them to flick the knife open. It is a good option for slowly rolling the blade open, but most people will be gravitating towards the flipper. And the flipper is definitely a good choice. The ceramic ball detent is dialed in and the blade pops open with a satisfying snap. The pivot is on bearings and the action is smooth.

For lockup, we have a titanum framelock. Like the Odino, the last framelock knife I reviewed, the Tolk bucks the trend of stainless steel lockbar inserts. I don’t have a problem with this provided that the titanium framelock works well, and I am pleased to report that is the case here. Lockup is early and solid. There is no blade play or lock stick to speak of. This is a titanium framelock done right. Rounding things out is a blue anodized titanium lockbar stabilizer. Blade centering is perfect.

Southard Tolk – Final Thoughts

The Tolk is basically everything I would expect from a high end midtech offering: top flight materials, exceptional fit and finish, and hand tuned details. The Tolk has all these qualities in spades. The packing is also worth noting. The knife comes in a foam lined embossed box and includes a certificate of authenticity signed by the man himself. This has been a fun knife to own and it is obvious that a lot of thought and care went into every detail of the experience.

Some scoff at the notion that this is “as close as you can come to buying a custom offering.” I think that subject should be explored on a case by case basis. The Tolk is obviously not a custom knife, but I think that in this case Brad has put a lot of time and thought into these. He and has apparently even created some of the parts (like the pivots). He was selling them personally, including each with a signed card of authenticity, and he was proud to do it. While this obviously isn’t a custom offering, in this case I believe it is a couple steps closer than a collaboration with a production knife company.

When I turn back to the practicality of the Tolk, the knife is a bit large and expensive to be a true daily carry for me, but I had a fun time meeting Brad at the show and walking away with something he had a hand in. Perhaps one day I will trade it in for something a little smaller, maybe even put the money towards a custom piece. Until then, this will be the closest I have come to owning a Brad Southard custom knife.

The Tolk is currently unavailable. If it were available I’d recommend purchasing it at BladeHQ or Amazon. I’d follow along on Brad’s website and perhaps he will release more models there. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Great Eastern Cutlery #73 “Cody Scout” Review

by Grayson Parker 8 Comments

Last Update: August 11, 2019
Just a few years ago, it seemed that fans of traditional pocket knives and modern “tactical” folders didn’t intersect. Enthusiasts of modern designs (myself included) were often leery of the carbon steel, clipless carry, and two-handed opening. Before the days of Instagram, the most popular way for people to show off their everyday carry was via forum posts; and while it wasn’t uncommon to see something akin to a Case Peanut pictured alongside a Paramilitary 2, traditional knives were largely relegated to a back-up role. It didn’t help that more than a few of the companies producing traditional knives were bought out and had their labor outsourced to China, which meant that (at the time) quality of materials and manufacture plummeted.

Buy the the GEC Cody Scout at KnivesShipFree

However, over the last few years, companies like Great Eastern Cutlery and Queen have been taking up a larger share of the market for pocket knives. One of the first patterns produced by Great Eastern was the #73, which is based on the two-bladed trapper pattern, one of the classic American traditional knives. I went with a single blade pattern in green micarta. The blade pattern sacrifices some traditional flare in favor of greater utility, while the scales avoid some of the wear problems associated with the natural materials more often used with this type of knife.

General Dimensions and Blade Details

The “Cody Scout” has a single clip point blade, measuring at 3 1/8 inches of 1095 high carbon steel, with a closed length of 3 ¾ inches, an open length of 6 15/16 inches, and weighs in at 2.25 ounces. Oftentimes, clip points come with an exaggerated top swedge, but fortunately Great Eastern chose a sleek, useful blade profile. The already thin stock is taken down to a very fine edge, though yours may need some reprofiling. Evidently Tom Krein is offering regrinds of several GEC knives. Personally, the stock is thin enough that I can’t see the value in having the blade reprofiled, but if anyone can do it right it’s Tom Krein.

Once I had the edge established on mine, it performed with aplomb at slicing tasks, though the 1095 needs regular touch ups. I’ve had better luck with my Sharpmaker than I have with my strop but your mileage may vary. 1095 is frequently seen on traditional folders, and all knives produced by Great Eastern under the Tidioute Cutlery brand make use of it. This steel tends to deform rather than chip out, so those of you who are tired of dealing with S30V’s chipping problems may be intrigued.

As for rust resistance, the steel on my #73 has performed admirably. If needed, I wipe down the blade after use. A dark patina has developed, which helps prevent the iron-like taste high carbon steels can leave during food preparation, and also protects the knife from the more serious red rust. It may sound odd, but I’ve had more problems with rust on 440c and Aus8a blades (both of which are technically stainless). This iteration of the #73 lacks most of the branding typically seen on knives produced by Great Eastern Cutlery. Apart from a tang stamp on each side of the blade, there are no markings, even on the shield inlay.

Handle, Ergonomics and Carry

Many traditional knives feature natural materials such as bone, stag, or wood as the covers (for you modern knife guys, scales). These materials are beautiful, warm to the touch, and offer an additional element of refinement over the usual selection of G10 and carbon fiber. However, as natural materials, they are more subject to warping and deformation, which may or may not be a concern to you. I live in what is essentially a desert, complete with triple digits, extreme aridity, and the occasional dust storm (a la The Mummy), and felt more comfortable with micarta. It is a material I never tire of, as it has an organic appearance (similar to bone or wood) but with most of the rigidity and resilience of synthetic materials.

Here, the green linen micarta has been sanded down to a smooth polish. The chamfering on the handles combined with the simple trapper frame makes the knife a pleasure in the hand. I’ve never had hot spots develop in use, and the blade is finished so well that it makes a fantastic worry stone (though I can’t advise that in public). Apart from a hairline gap between the back spring and the brass liner (which is only detectable by holding it up to the light), the quality of manufacturing is immaculate. The #73 is a popular pattern in the GEC line-up, so you will likely be able to select the cover material that suits you best.

I purchased a leather slip case along with the #73. Prior experience with traditionals and large Swiss Army Knives has shown me that clipless knives (barring exceptionally odd dimensions) tend to roll around in the pocket in the course of a day, and quickly become a hassle. The leather pouch is made by KnivesShipFree and distributes the weight of the knife in pocket. While it does add a step to accessing the blade, it makes a knife that I would normally consider unpocketable quite pleasant. Besides, if you are interested in quick access, a traditional is likely not the correct call to begin with. The quality of the slip case is excellent, but one of the nylon stitches (melted together) came loose. Quick application of Fabri-Tac solved the issue, though it’s something to be aware of. I opted for the weatherproof finish for this pouch, but that costs extra.

Walk and Talk

The pull on the Cody Scout is smooth, snappy, and very stout. Many reported that the #73 (not the Cody Scout in particular) was a “nail-breaker,” though mine isn’t nearly as tough. It’s worth noting that many of my friends have a hard time opening this knife. If you are acclimated to slip joints, you should be fine, but keep in mind this knife has a reputation for being a bear to open. I prefer to get the pull started with my thumbnail and pinch the blade from that point, as I find the extra purchase helps me open the knife in a more secure fashion. The half-stop doesn’t jerk the blade away from your fingers, which is a concern for some. I prefer slip joints with a strong pull, but that doesn’t mean this knife is safer because of it. As always, use knife sense and exercise caution.

GEC #73 Cody Scout – Final Thoughts

Traditional folders also exist in a space that many knife companies are leaving behind. As framelock flippers have taken over the market, we’ve seen a massive spike of options in the $200 plus range, while the options at less than $100 have stagnated. The average knife from Great Eastern Cutlery will cost you between $70 and $100, which undercuts many of the new offerings from Spyderco, Benchmade, and Zero Tolerance. Although the materials are not bleeding edge, they are from an era when knives were used much more frequently.

One of the reasons folks tossed a small traditional in their pockets on top of the modern knife they were carrying was that traditional knives have a very nonthreatening appearance. Modern folders can attract funny looks in the wrong environment, but traditional folders and multitools don’t seem to suffer from the same problem.

Whether due to clever marketing, an oversaturation of titanium framelock flippers, or a good value proposition, traditional knives are making a comeback. The tight manufacturing tolerances of companies such as Great Eastern and Queen lead me to believe that the resurgence of traditional knives will last.

I’ve been more than satisfied with the #73 in the month or so that I’ve owned it. The 1095 requires regular maintenance, but apart from that, this is close to my ideal everyday carry knife. If you’re the type to fuss over natural materials but want to give traditional knives a try, consider this blade. Personally, the “Cody Scout” seem more timeless than many traditional knives in production, which appear to be thoroughly grounded in the early twentieth century. Even if you’re only looking at traditionals as back-ups to more modern pocketknives, I’d point you to the #73. It possesses enough charm to put all but the most fervent of anti-knife folk at ease, but also wouldn’t be out of place next to a Sebenza.

GEC #73 Cody Scout – From $82.53
From: KnivesShipFree

Editor: I recommend purchasing the Cody Scout (and any of its derivatives) at KniveShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Northwoods Knives Indian River Jack Review

by Dan Jackson 13 Comments

I have been interested in traditional slip joint knives for a while now. I am not alone. Many have come to enjoy the pocket friendly lines of a simple slip joint, and the thinly ground blades cut like nothing else. Some might find the absence of a lock unnerving, but in my experience most of the time a slip joint is more than enough knife for normal utility tasks.

Buy the Northwoods Indian River Jack at KnivesShipFree

As I wandered down the slip joint rabbit hole I eventually came across the Northwoods Knives Indian River Jack. Here is a simple single blade pattern, but with an upgraded blade steel (in this case, CPM-154). No other bells or whistles to speak of. Some might refer to this as an ever elusive “perfect EDC knife”.

The Northwoods Knives brand was purchased by Derrick Bohn of KnivesShipFree sometime around 2010-2011. Northwoods were originally made by Great Eastern Cutlery and Queen Cutlery (2 American companies specializing in traditional folders), and Derrick has continued the tradition of having the knives made in the USA by these manufacturers. The knife in this review was made by GEC, although the current version of the knife is made by Queen (at the time of writing this article, mid 2015). IRJ’s are released in small batches. Due to the limited supply and unique selling proposition of a 154CM blade, demand for the IRJ is out of control. The knives quickly sell out every time a batch hits Derrick’s website.

I was fortunate enough to snag one of the 2014 GEC manufactured IRJs, and have been carrying the knife for many months now.

General Dimensions and Blade Details

The IRJ has an overall length of approximately 6.25″, a 2.5″ blade, weighs 2.2 ounces, and is made in the USA. This knife has a similar footprint to my cherished Victorinox Cadet, and is an ideal size for every day carry (EDC) in my book. Certainly, this makes for a fine gentleman’s folder. And given the limited quantities of the IRJ I would classify this as a collectible as well. As I try to compare the IRJ with other knives in my collection, I would almost classify this as a cross between the Cadet and CRK Mnandi.

The blade of the Indian River Jack is a simple drop point pattern. Again, it reminds me of the blade on the Cadet. Just dead simple. In this instance there is a very slight swedge. Still very simple. The blade has a full flat grind with satin finish, and is thin behind the edge. It is a beautiful slicer. Perfect for light tasks like opening mail and cutting up fruit, but certainly capable of tougher chores. It slides through cardboard, cuts rope, and whittles wood with ease.

My version of the Indian River Jack came in CPM-154 stainless steel. As much as I enjoy the charm of the high carbon steel blade on my GEC Viper, there is something to be said for the ease of maintenance of stainless steel. I can ride this knife hard, put it away wet (sometimes literally), and not have to worry about rust or heavy oxidation. I have been guilty of occasionally not cleaning and oiling my high carbon bladed slip joints as well as I should have, and coming back to find the blade covered with rust. Plus CPM-154 is just excellent steel. It takes an edge easily enough and holds it for a long time. Combine that with the super thin geometry of the IRJ’s grind, and you are left with almost unmatchable slicing performance.

Handle, and Ergonomics

The handle of the Indian River Jack is a simple pill shape, with nickle silver bolsters and brass liners. The handle comes in a variety of “covers” (handle scale materials). Mine happens to have jigged bone for the handle material, which is a handle material that I don’t have a lot of experience with. It certainly fits the traditional aspects of the knife. The nickle silver bolsters are highly reflective and lend a touch of class (and extra heft) to the IRJ.

Everything has been riveted together. Fit and finish is pretty good on my knife. The transition between backspring and spine of the blade on my example could be better, and there is a tiny gap between the liners and backspring. But beyond that the pieces line up and the finish work is nice. Given the price I am not disappointed.

In hand the Indian River Jack is a capable little knife. There is no jimping, no finger choils, no lanyard hole, no skull crusher pommel, no rubber inserts, or skateboard tape. Yet still the IRJ seems to work just fine. There is plenty to hold onto and I have enjoyed using the knife for a multitude of basic chores. As with any folding knife, it needs to be treated with care and respect.

While there is no pocket clip to speak of on the Indian River Jack, KnivesShipFree does include a leather slip case with the knife. The leather on the slip case is thick, and carrying the knife in the case is akin to carrying a small secondary wallet. Slip cases prevent the knife from getting beat up in your pocket, and I am a fan of these kinds of cases – especially for dressier pieces like this. It’s a nice touch and a great option for the IRJ, especially if you want to preserve the knife as a collectible.

Walk and Talk

I have disbanded with the usual “Deployment and Lockup” section since this is a slip joint. Instead, lets discuss the “walk and talk” of this modern traditional folder. The IRJ features a slim nail nick to access the blade. It is cut sharply and the knife is easy enough to open and close with two hands. This will never compare with the easy opening of a thumb stud, thumb hole, or flipper, but that is part of the charm of these older patterns.

The backspring on the IRJ is pretty snappy. I won’t proclaim to be an expert on the walk and talk of slip joints, but compared with some of my other slippies, I’d say it’s a on the strong side. The blade opens and shuts with a satisfying snap. There is no hard half stop, but the blade does seem to naturally rest in the half position. There is a little pinch of resistance there as you push the blade open or closed. All said the action on this slip joint is smooth and satisfying.

Indian River Jack – Final Thoughts

It should come as no surprise that I really like the Indian River Jack. The classic design, good fit and finish, and CPM-154 blade all serve to make it a winner in my book. Despite being somewhat rare and coveted, this is still a working knife at the end of the day. It isn’t perfect, but that makes it all the more endearing. Compared with the fancy folders of today, the $130 price tag is relatively modest.

In a way I have struggled to write this review. This knife is understated, but excellent. I wanted to give it the respect and appreciation it deserves without being over the top, because doing so would be incongruous with the knife. But maybe I should be over the top. This knife is worthy of the praise.

For those on the quest for the “perfect EDC knife”, the Indian River Jack could be a contender depending on your preferences. If you are like me, and gravitate towards small sleek knives for daily carry, then the IRJ checks a lot of boxes. Perhaps the limited availability is the biggest detractor to the IRJ. You have to scour the secondary market or keep an eagle eye on KniveShipFree (the only purveyor of Northwoods Knives) for when they get new shipments in. Regardless, the IRJ makes my list of best EDC knives. Highly recommended for fans of minimalist and traditional folding knives.

Indian River Jack – From $130.00
From: KnivesShipFree

I recommend purchasing the Indian River Jack at KnivesShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Shirogorov 95t Review

by Dan Jackson 12 Comments

I have had folks occasionally confess that they live vicariously through my reviews of high end pocket knives. I have handled some nice stuff over the years, but for the most part my wallet and I have been able to resist the renaissance of mid tech and custom knives. This is despite the deluge of eye candy on Instagram, which seems to suggest that everyone acquires $750+ knives and $100 titanium bottle openers at the same rate I buy a loaf of bread and some eggs at the grocery store. Well, I finally gave in, joined the masses, and grabbed this Shirogorov 95t.

Buy the Shirogorov 95t at BladeHQ

But this didn’t happen overnight. I have lusted after a Shirogorov for several years before eventually getting one. I actually had the chance to buy one directly from the maker at the 2014 Blade Show. I was one of the few to get their ticket called in their lottery. The problem was the knives started at $1,000+, which was more than I was willing to spend. I scored this gently used 95t off the forums while recording an episode of Gear Geeks Live.

For those unfamiliar with the maker, Shirogorov is a Russian knife company operated by the Shirogorov brothers. There isn’t a ton of info on the company (at least in English), but this is a growing manufacturer focusing on high end production and custom knives. They might be categorized as pioneers in the recent trend of high end production knives coming out of Russia and Asia. They are known for sleek designs, fanatical attention to detail, and exceptional fit and finish.

The 95 is one of their more popular models, and the 95t is a full titanium handled version with their signature “turtle” pattern (hence – a 95 “t”). This review has been a long time coming, and I’m pleased to finally be able to share some thoughts on this exclusive knife.

General Dimensions and Blade Details

The 95t has an overall length of 8.75″, a 3.75″ blade, and it weighs 5.2 ounces. This is a large knife, and is not well suited for my style of every day carry (EDC). To me this is more of a self defense knife or large utility knife. Given how expensive it is, it has largely remained a collectible for me, but I did carry and use it a little. Mostly for purposes of putting this review together.

The 95t’s drop point blade is about as simple of a shape as you can get. Just 3.75 inches of flat ground and lightly tumbled steel. Of course, the devil is in the details, and the 95t has some nice ones on its blade. The edges have been slightly chamferred up by the jimping and the plunge lines are very clean. I wasn’t able to examine the factory edge on this particular knife (the previous owner attempted to sharpen the knife on a [easyazon_link asin=”B006WRH198″ locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Wicked Edge[/easyazon_link]), but as it stands it cuts very cleanly. The finish is very fine and the knife glides through cardboard.

My 95t came with Elmax steel for the blade. Elmax is a higher end stainless steel by Bohler Uddeholm. Shirogorov offers the Model 95 with several other blade steels as well, including S30V. I’ll be the first to confess that this 95t has not been a real heavy “user” for me. First of all, at $700+ I have plenty of less expensive knives to beat up on, and secondly, with a near 4″ blade the 95t is well outside my normal range for daily carry – even on evenings and weekends when I’m not working in an office. I will say the 95t tracks through paper effortlessly, and opens boxes with the best of them. Anecdotally, the full flat grind and finely finished blade seemed to aid with slicing performance.

Handle, Egonomics, and Pocket Clip

The 95t has a full titanium handle. As previously mentioned, this particular model has Shirogorov’s signature “tortoise shell” design carved into it – hence the 95t. The handle really is a thing of beauty. The titanium has been masterfully milled. The edges are contoured and the single stand off is sunk into the titanium frame. There are a number of nice details to explore, from the “channel” behind the flipper tab for your finger to fall into, to the polished edges of the custom hardware. Speaking of custom hardware, while the slotted hardware is pretty, it easily mars if you try to adjust the pivot or remove the clip. The titanium itself has been given a thorough tumbling. This helps hide wear and contrasts nicely with the bright stainless blade and accents.

The 95t is a large folding knife and it feels very good in hand. There are no sharp edges to speak of, save the cutting edge of course, and the simple handle shape allows your fingers to fall in place. There is a short run of jimping on the spine which reminds me a little of a Sebenza, but isn’t quite as sharp. The turtle pattern provides some additional traction without being overbearing, and the stonewashed titanium has a texture of its own. This simple handle will fit most people well.

The pocket clip is a 3-D machined piece of titanium, and is a miniature work of functional art in its own right. Drilled and tapped for right side tip up carry only, the clip compliments the lines of the knife. It also works well, affording secure and reasonably deep carry. The pommel just peeks out over your pocket when in place. The 95t is a large knife, but carries nicely considering. It has some heft to it, but isn’t over the top heavy. It carries well for its size.

Deployment and Lockup

The 95t flips fantastically. While it isn’t as much of a rocket launcher as the Zero Tolerance 0454, it’s still a pretty damn good flipper. The action is crisp and the blade kicks open easily with the push of a finger. My particular knife runs on a single row bearing system, however, I know that Shirogorov also offers knives in a fabled multi row bearing system (MRBS). I have never handled one of their MRBS knives, so I can’t comment on that feature. I can say this single row bearing knife is very smooth. The blade shoots open and falls closed easily.

For lockup we have a frame lock with a steel insert. Lockup is early and extremely solid. There is no play in any direction, and the lock is easy to disengage. Blade centering is perfect.

Shirogorov 95t Review – Final Thoughts

I have had the privilege of checking out some damn cool stuff over the years. So far I have largely resisted the temptation to venture in to mid tech and custom knife territory, but the Shirogorov was too hard for me to resist. I am very happy I got a chance to check this knife out. It’s beautiful and amazingly well executed. Every aspect of the knife has been meticulously considered, and the end result speaks for itself. This is one heck of a knife, and if you have the money and desire to own one, I do not think you will be disappointed.

Here is a shot of the 95T next to another beautiful knife, the Fantoni CUT Flipper:

I won’t deny that this is an expensive piece. I am unsure what these retail for exactly, as they don’t stay on the retail market for long. I would guess anywhere from $750 to $1000. Either way you are paying a lot of money for this knife. So certainly this is not a knife anyone “needs”. I’ll never be able to answer for you whether it is “worth it”. Only you can make that decision. When I compare the 95t to a large Sebenza or a Hinderer XM-18, I think you are getting something more for your money. I’d have a hard time deciding between this and the ZT 0454, but I think the 95t is made just a little bit better.

I usually sell off many of the expensive knives that land in my collection. I’m not made of money and I need to do this to check out new stuff. I have been sitting on this 95t for at least 6 months now. I think the fact that I have stalled writing this review for so long says a lot. I am having a hard time letting it go, and just might convince myself to keep it. As someone who has had a lot of knives pass through his hands that’s about as glowing of an endorsement as I can offer.

Shirogorov 95t
From: BladeHQ

Occasionally Shirogorov knives find their way to BladeHQ, and I recommend purchasing them there. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance 0620CF Review

by Dan Jackson 13 Comments

Last Updated: August 3, 2019
I have given Zero Tolerance over the past year. So I actually had to pause and think when my pre-order for the 0620CF popped into my inbox. I try to feature a variety of knives from different manufacturers. Would I purchase and review this knife? I slept on it for a few days, and decided that this collaboration with Ernest Emerson was special enough to justify another Zero Tolerance review.

Buy the Zero Tolerance 0620CF at BladeHQ

Buy on Amazon

I’m glad I made that decision, because when this knife arrived I could immediately tell it was significantly different from the other ZT offerings I have sampled.

General Dimension and Blade Details

The 0620 has an overall length of 8.5″, a 3.6″ blade, and weighs 6.2 ounces. While the Kershaw / Emerson collabs are scaled down offerings, the 0620 more like a full size Emerson. This thing is large and in charge. It suits the nature of the collaboration well, but relegates the knife to a more dedicated defensive role or collector’s item. At least for me. I don’t doubt some will every day carry (EDC) this knife, and there is nothing wrong with that if you can manage the size and weight.

The blade has always been one of my favorite aspects of an Emerson. The crisp grinds and beautiful finishes of the blade contrast oddly with the often crudely finished handles. I am pleased to say that ZT did Ernest right by the 0620. This is an immaculate American tanto complete with Emerson’s 2 tone finish: satin bevels and stonewashed flats. The multi-faceted grind has been beautifully done and the blade catches the light almost like the real deal.

Where this collaboration departs from a real Emerson is that ZT decided to V-grind the edge. Say what you will about chisel edges… easier to maintain “in the field”, cut better, blah blah blah – I’ll take this standard V-grind edge any day.

I have never been a huge tanto fan, but this version features a subtle curve between the tip and secondary point. It speaks to me the same way the Lum Tanto did – a tanto blade for guys who don’t prefer tantos.

The natural geometry of a tanto blade is excellent for stabbing, and this one with its clipped point is no different. While this is a beefy slab of steel, the flat grind is lean enough to make this a reasonable slicer, and the edge has been expertly applied.

If you aren’t a modified tanto guy, ZT is releasing the 0630, featuring a modified clip point blade, much like the CQC-8 Horseman that may be more to your liking. Personally, I have been enjoying the tanto as I currently don’t have a lot of tantos in my collection.

Much like the 0562, ZT is offering the 0620 in two flavors: M390 blade with a carbon fiber handle scale (shown here), and an Elmax blade with a G10 handle scale. M390 is a super steel and I have always treated it with a little apprehension because super steels have a reputation for being difficult to sharpen. I put my big girl panties on for this review and have been actually, like, using both my 0620 and my Benchmade Valet which is also in M390. Edge retention is exceptional and so far the steel has responded well to light stropping. This is all I have had to do over the past 8 weeks or so of use. This is excellent stuff and I look forward to continuing to evaluate M390 in earnest.

Handle, Ergonomics, and Pocket Clip

The 0620 has as thick titanium locking side and the show side is carbon fiber (or G10) over a full stainless steel liner. Construction is robust, to say the least. This is an extremely solid knife and it’s difficult to describe the feeling you get in handling the 0620. Each edge is rounded, the liners and carbon fiber are seamless. Beefy hardware sits securely in the handles. The heft of the thick titanium lock side adds to the gravitas of the knife. It is impressive.

While ZT didn’t include Emerson’s signature flat head pivot and Phillips head body hardware, they did borrow the oversize hex head pivot from the 0300 and included some beefy torx hardware and stand offs. They also included a lanyard post, which seems redundant placed next to the two stand offs, but looks to be removable.

In hand the 0620 feels like a beefed up Emerson – not a bad thing at all. The simple handle design is Emerson ergonomics at its finest. A forward finger groove indexes the finger nicely, and the wide thumb ramp is gently jimped for control and tactile feedback. The rest of the handle is simple and accommodates a wide variety of hand sizes. The 0620 is a pretty thick knife – not amazing in pocket, but excellent in hand. After working with the 0620 for several months I haven’t noticed any hot spots. Job well done by both Ernest and ZT.

The pocket clip looks almost as if it were plucked from the Emerson parts bin – it’s a carbon copy of what you would find on the real deal, except of course for the Zero Tolerance Logo emblazoned on it. It is a blackened steel clip, much like what you would find on a Benchmade Griptilian if you have never handled an Emerson. The handle has been drilled and tapped for ambidextrous tip up carry. It’s not super deep carry, but fairly deep. The 0620 is neither small, thin, nor light, but the sturdy clip holds the knife securely in pocket. It carries well for what it is.

Deployment and Lockup

Like a real Emerson, the 0620 makes use of both a Wave and thumb disk. Perhaps the most notable point regarding the deployment is the detent – it’s very strong. While it’s possible to flick it open with the thumb disk, the detent is so strong that flecks of my thumbnail often depart with the blade. The wave works well, although frankly waves have never graduated beyond a novelty for me. ZT went with classic phosphor bronze washers for the 0620. Bronze washers are all well and good, but it would have been cool to see them put KVT bearings in like on the 05620.

I have said it before and I’ll say it again, ZT has really dialed in the lockup on their frame locks. Like the past few titanium framelocks from Zero Tolerance I have reviewed, this one comes with a stainless steel insert. Lockup is early (~30%), rock solid, and without stick or blade play. It’s perfect. The 0620 in particular inspires a lot of confidence. The blade slides in to place with a satisfying snap and I wouldn’t hesitate to use the 0620 for harder tasks if necessary. Blade centering is perfect.

Zero Tolerance 0620 Review – Final Thoughts

The 0620 is arguably the best “Emerson” ever. The 0620 is built better and finished better than a real Emerson. It lacks quirks like chisel edges, and a right side tip up carry only pocket clip, but it has been upgraded with carbon fiber, M390 blade steel, and a beefy titanium frame lock. Most astonishing is that the 0620 is still made in the USA and priced for about what a similar size Emerson would cost. Case in point: the Emerson Roadhouse, probably one of my favorite Emerson patterns retails for around $230. This ZT collab comes in a at $240, and is right at $200 if you opt for the less-fancy version with Elmax blade and G10 handle scale.

There is little to nothing I would change about the 0620. In a perfect world I’d mill out the titanium frame lock to try and lighten the knife, and possibly add bearings to make this indulgent piece even more over-the-top. These are minor quibbles. Sure, it is big and impractical for normal person daily carry, but so is a real Emerson.

Zero Tolerance has once again delivered a superior product: high quality materials, beautiful construction, and designed by a legend in the industry. I highly recommend the 0620 for Emerson fans and fans of big, well made folding knives.

Zero Tolerance 0620CF Emerson Tanto Knife

Made in the USA; Wave shaped opening feature; Thumb disk for manual opening
Reversible clip (left/right); Frame lock, hardened steel lockbar inserts
Steel: Carpenter CTS-204P, stonewashed and satin finish
Handle: Carbon fiber front, bead-blasted titanium back
Blade Length: 3.6 Inch (9.1 cm); Closed Length: 4.9 Inch (12.4 cm)

I recommend purchasing the ZT 0620 at Amazon and BladeHQ.