Collectable Knives

Mcusta MC-1 Review

Nestled in the heart of Seki Japan, Mcusta has been a part of Japan’s renown knifemaking industry since 1964. Often compared to Solingen, Germany, Seki is a knife-nut’s dream. Rich in resources such as iron sand, charcoal and water, Seki has been the center of Japanese cutlery production for over 780 years.

Buy the Mcusta MC-1 at BladeHQ

Buy on Amazon

The odd thing is, when most American knife enthusiasts hear about Seki-City, Spyderco is often the first company to come to mind. Indeed, Spyderco has recently been producing some beautiful knives in Seki City, but their roots are 100% American. On the other hand, Mcusta’s roots run deep into the Seki-City soil, and the company has only recently arrived on to US market.

Today for your consideration is the Mcusta MC-1 series knife. This is actually their “Basic Series” folder although what you get is anything but basic. For those seeking a gentleman’s folder or a high end EDC option I highly recommend the MC-1. There are some interesting nuances that differentiate this knife from the typical “American Style” folder. Follow along as I share with you what I like so much about these simple Japanese blades.

General Dimensions and Blade Details

The MC-1 has a 4.25″ handle, a 3.25″ blade, an overall length of 7.5″ and a weight of 3.4 ounces. To me these are almost ideal proportions perfect for EDC, and the knife is large enough to potentially be used as an emergency tactical knife (not recommended, but it’s better than nothing). The MC-1 features a plain edge drop point blade with a fine tip and a flat grind starting 3/4 of the way up the blade. This blade, like all of the metal components in Mcusta knives, is laser cut for a precision fit.

For blade material Mcusta gives you the option of solid VG-10 or the handsome laminated damascus and VG-10 option shown above. This laminated knife is actually a core of VG-10 sandwiched in between 2 pieces of 33 layer nickle damascus and heat-treated to a Rockwell hardness of 59-60. This results in a visually stunning blade that is also very functional. As far as the steel goes, I love VG-10, it’s a very tough steel that can get wicked sharp and has excellent edge retention. Some find it a bit of a chore to sharpen, but I have never had a problem unless I let the knife get way too dull.

Handle, Ergonomics and Pocket Clip

Mcusta offers a wide range of handle scale materials including micarta, Corian (an interesting option) and a variety of exotic hardwoods. The knife featured in this review has African Ebony scales and the photograph below shows some of the other options. These scales are fitted over more laser cut steel and are hand finished. The simple pillar construction is a clean look that allows for easy maintenance. The knife is bolted together so if you wanted to, you could take it completely apart for a full cleaning. I’ve noticed that the liners aren’t milled out, but at 3.4 ounces the weight of this knife is still more than acceptable to me.

As far as ergonomics are concerned the handles feature some deep finger grooves for comfort and control. These grooves provide good grip in both forward and reverse holds. One thing to notice is the distinct lack of jimping on the thumb ramp (to dismay of some I am sure). In fact, there isn’t much of a thumb ramp at all. For a classier knife, I don’t think you really need it, but Mcusta does make some other models with these features (I’ll be reviewing a tactical version soon) if you want something with a little more utility.

Pocket clips are almost always a source of issues and the MC-1 is no exception. The good news is that this clip is both sturdy and elegant. Also, the clip is positioned at the very top of the handle so the knife practically disappears into a pocket. The bad news is that the clip is absolutely not reversible and only accomidates tip down right pocket carry. Notches have been cut into the handle to accommodate this “low rider” clip so flipping it over for left pocket carry is simply not an option. This is disheartening for me and the other lefties out there, but thankfully Mcusta offers other knives with a reversible clip (better than nothing).

Deployment and Lockup

The MC-1’s blade is deployed with a flick of a thumb stud. Deployment is silky smooth thanks to a teflon washer system. Teflon is a departure from the phosphor bronze washers found in most high end knives, but the deployment is still incredibly fast. I haven’t heard of any issues (either short term or long) with these teflon washers. The blade is locked in place with a thick liner lock. This is a very solid liner lock that is capable of taking some abuse and there is zero play in the blade.

Mcusta MC-1 Review – Final Thoughts

One thing that needs to be commented on here is value. Depending on the materials you can pick buy a new MC-1 for as low as $90 and they top out at around $140. When you consider the materials and workmanship involved here this strikes me as an incredible value.

Also, I have to say that it’s been a while since I’ve been so moved by a knife. You really need to see one of these in person to understand where I am coming from. I’ll admit that I am a sucker for hardwood handles, but the simple design and beautiful craftsmanship really hits home with me.

Of course, the MC-1 isn’t without fault, and my main contention is the non-ambidextrous pocket clip. Others may like to see more jimping, milled liners and perhaps even phosphor bronze washers (I’m curious to see how the teflon washers will stand up to the test of time). I’ll concede that these are valid concerns however, lets not forget the purpose of this knife and also consider the potential differences in the Japanese knifemaking industry. My guess is that the physical disconnect between Mcusta and the American market is largely to blame.

In my Mcusta Tactility review I explore a knife that addresses some of my perceived issues with the MC-1.

Mcusta Basic MC-14DR Indian Rosewood Dasmascus w/Clip

I recommend purchasing the Mcusta MC-1 at BladeHQ or Amazon. BladeHQ has a great selection of Mcusta knives in general, and their customer service is bar none. Buying anything through any of the links on this site earns the site a small commission at absolutely zero additional cost to you. This is how I keep the site running. Thank you very much for any and all support.

Spyderco Sage 2 Review

by Dan Jackson 14 Comments

Last Updated: August 2, 2019
Today I am looking at another beautiful knife, the Spyderco Sage 2. The Sage series is designed to pay homage to various pioneers in the knifemaking industry and to recognize some of the talented custom knifemakers that have helped re-define pocket knives.

Buy the Sage 2 at BladeHQ

Buy on Amazon

The Sage 1 pays homage to knifemaker Michael Walker who invented the liner lock and features carbon fiber scales while the Sage 2 focuses on knifemaker Chris Reeve’s Reeve Integral Lock (or frame lock). For those unfamiliar with Chris Reeve Knives (CRK), his “semi-production” knives are considered to be the holy grail among many knife enthusiasts. They are beautiful pieces and are quite pricey. What appeals to me about the Sage 2 is that you get a lot of what makes the CRK so desirable at a fraction of the cost.

General Dimensions and Blade Details

The Sage 2 has an overall length of 7 1/8″, a 3″ blade, and weighs of 3.5 ounces. These are great numbers in my opinion. The Sage 2 packs a lot into a small and lightweight package. This is an ideal size for every day carry, and the Sage 1 has proven itself to be one of my all time favorite EDC knives. The Sage 2 is just as carryable and makes for a great upscale EDC. The Sage 2 is made in Taichung Taiwan.

The blade is 1/8″ thick which is nice and beefy, it makes for a stout knife which is still light and agile. Spyderco went with their classic leaf shaped blade, with the full flat grind that many people love. The full flat grind is beautiful and makes this knife a great slicer.

Spyderco selected CPM S30V for the blade steel. Back when I first penned this review in 2011, S30V was a high end steel. Today (late 2016), S30V has lost some of its luster next to steels like S35VN, CTS-XHP, and even more exotic steels like M390, but this is still serviceable steel. It’s a little more brittle than I would like, and can be difficult to sharpen at times, but it’s still reasonably easy to sharpen and holds a good edge. It’s a good steel, but admittedly not a great steel. I’d like to see Spyderco update the Sage series to S35VN at some point.

Handle, Ergonomics and Pocket Clip

The handle is where the Sage 2 really shines. It is made of 2 thick slabs of titanium and is held together by 3 torx bolts. I really like the simplicity of the handle. The titanium keeps this knife lightweight and is nicely finished. The flow through construction and easy disassembly are two other features that I love. They make this an easy knife to clean and maintain.

The ergonomics are also very nice. The handle length is only 4 3/16″ however the jimping on the thumb ramp and choil allow you to choke up real close to the blade. Like most Spyderco knives I have held the Sage 2 feels good in hand and will make an excellent user for someone looking at a high end working knife or EDC item. The handle edges are also well finished with no sharp edges or “hot spots.”

The pocket clip is the Spyderco wire clip. I think that this is a great pocket clip design because it is simple, strong and easy to conceal. Some people do not like the wire clip. I think those people are nuts, but there is plenty of room for multiple opinions.

The retention of the pocket clip is perfect and the deep carry nature of the clip makes the knife almost disappear in pocket. Spyderco designed this knife tip up carry only however the clip is ambidextrous. For me this isn’t a problem although I understand that sometimes people prefer tip down. If that is your desire Spyderco makes plenty of knives with that feature. I tend to prefer blackened clips as it makes them even more discreet, but I can see how that might spoil the aesthetics of the Sage 2.

Deployment and Lock

Deployment on the Sage 2 is a breeze with the standard Spyder-hole and phosphor bronze bushings. The blade moves with very little effort from your thumb and the sound the knife makes when it locks is very fun and satisfying. With the Caly 3 (and other lockback knives) I noticed it takes some effort to flick the blade out but the Sage is practically effortless. That said, retention is still good, it’s not like the blade is falling out of the handle – it’s only once you give it that initial push that you get the incredibly smooth deployment.

Now, the lock is really the first thing I wanted to talk about (since the entire knife is designed to showcase the lock) but I try to keep a method to the madness here and like to do my reviews “in order” so my regular readers know where to find exactly what they are looking for. The Chris Reeve’s designed framelock is a beast and is among the strongest locks you can buy. The lock’s strength lies in its simplicity. The entire titanium handle locks the blade in place.

I am left handed and this is not a left handed knife. That said, this knife is still easy to disengage with my left hand although I would love to see a dedicated lefty version some day.

Spyderco Sage 2 Review – Final Thoughts

The Sage 2 is an excellent knife and a worthy successor to the Sage 1. The materials, fit, and finish are top notch and the design is pure Spyderco. The retail price for the Sage 2 is around $175. I know for some that will be too much money to spend on a knife, but when you compare that to the other titanium frame lock knives on the market (including Hinderer, Strider, and Chris Reeve Knives) the Sage 2 offers a compelling value proposition. Granted, the Sage 2 is made overseas, but Spyderco’s Taiwanese knives are all excellent. There is not a single manufacturing flaw with the knife and I am extremely impressed with the level of fit and finish. I can’t think of another titanium framelock out there that can touch the value and performance of the Spyderco Sage 2 except for perhaps the Boker Urban Trapper.

If you are in the market for a titanium frame lock knife, but aren’t ready to shell out the big bucks for Chris Reeve, or similar offering, then I can absolutely recommend the Spyderco Sage 2. The Sage 2, along with the Sage 1, are some of my all time favorite EDC knives. These are top shelf knives that can both be had for a reasonable amount of money.

Spyderco Sage2 Titanium PlainEdge Knife

Deep-pocket wire clip for left or right hand carry
Closed Length (Inches): 4.19, Overall Length (Inches): 7.19, Blade Length (Inches):3, Blade Steel: CPM S30V, Grind: Full-Flat
A spear-point shaped, full-flat ground CPM S30V blade
All screw constructed titanium handle
Michael Walker Linerlock with ball bearing detent

I recommend purchasing the Spyderco Sage 2 at ]Amazon, or BladeHQ.

Zero Tolerance 0550 and 0551 Review

by Dan Jackson 10 Comments

Last Updated: August 3, 2019
Today I am taking a look at the Zero Tolerance 0550, a special collaboration between ZT and Rick Hinderer of Hinderer Knives. Rick has been making knives and self defense weapons for over 20 years. He started out specializing in Damascus and art knives, but over the past decade has made a transition into heavy use knives. These knives are extremely popular with military and law enforcement due to their uncompromising quality and extreme hard use durability. Naturally, knife collectors, enthusiasts and general consumers also became very interested in these knives and they have become a benchmark for quality among the knife community.

No products found.

Mr. Hinderer is also known for his various knife innovations, the most famous being his “Lockbar Stabilizer,” which is used on his titanium frame-lock knives to prevent over-extension of the frame-lock when you are disengaging the lock. Over the years Mr. Hinderer has been involved in several other collaborations with Gerber and Benchmade, designing various production knives.

The Rick Hinderer and Zero Tolerance Collaboration

What excites me about his latest collaboration with Zero Tolerance, is that ZT is really taking Hinderer’s hard use philosophies to heart by combining premium materials with USA craftsmanship to build the 0550 series of knives. The end result appears to be a knife with a lot of the qualities people lust over in Hinderer’s very rare and expensive custom and semi-custom knives at a price that many collectors can afford.

The 0550 series currently contains 2 knives. The 0550 is the regular production version of the knife and the 0551 (shown here) is a special edition limited to only 1000 pieces. The 0551 differs from the 0550 in that it uses a different type of steel and has a special pattern on the G10 handle scale. Rumor has it that ZT may make more of the 0551.

General Dimensions and Blade Details

The ZT 0551 has a blade length of 3.5″, a closed length of 4.5″, a blade thickness of 0.156″ and a weight of 5.8 ounces. I know for some that the words “5.8 ounces” will be a deal breaker, and I can understand that if weight is a concern, but that doesn’t stop this from being an excellent knife if you enjoy heavier blades. As for purpose here, the ZT 0550 is a hard use tool all the way. Every aspect of this knife has been overbuilt and the Hinderer pedigree shines here at every angle.

The on blade the 0550 is a modified drop point made from thick stock and features a high flat grind. If you run your fingers behind the edge you can feel how thick this knife is. The blade steel actually thickens out as you reach the tip – it’s pretty crazy. I never recommend prying with a knife, but if you had to use a knife for prying, I think the 0550 would hold up better than the average knife. The caveat to this kind of design is that the knife is not the best slicer. That’s the trade off.

The 0550 features CPM S35VN. S35VN was designed to be a successor to the wildly popular S30V blade steel. The knife community has met S35VN with some skepticism so I took it upon myself to really cut with this knife, and I sharpened the blade a couple times. I feel like S35VN is really good stuff. It sharpened easily, held a nice edge and I had no issues with rust or corrosion. I also feel like the steel exhibited good toughness, as the blade never chipped out or warped in my use. Of course, this is just one knife (with a very thick blade) and I am only one guy. It’s going to take a lot more experience to fully appreciate S35VN. If my opinion ever changes, I’ll be sure to update the review. For the time being I’ll continue to use and enjoy my 0550.

Handle, Ergonomics and Pocket Clip

The 0550 has a handle made of G10, stainless steel, and titanium. The non-locking side has a thick piece of G10 over a painstakingly milled out stainless steel liner. The locking side is made of a solid slab of 6AL4V titanium and features a Hinderer lockbar stabilizer to prevent over-extension of the lock. The knife has a flow-through design with thick pillars securing the two handle pieces together. Hinderer also makes aftermarket G10 scales for both the 0551 and 0550 in pretty much any color you want. This is a really cool way to add some style and make this knife your own.

The 0550 has solid ergonomics and the knife works in a variety of grips. Starting things off, we have a nice finger choil and a thumb ramp with coarse, but very purposeful jimping. This gives you great control over the blade and really fits my fingers well. The handle itself is thick and it fills the hand nicely. It’s a boxy handle, but the corners have been slightly rounded for comfort. I find the 0550 to feel very nice in both forward and reverse grips and I’m pleased with the amount of traction this design offers.

The pocket clip is a piece of steel with the Zero Tolerance logo lightly milled onto it. Like many other Zero Tolerance knives, this is the same clip found on the Kershaw Skyline. For some that might be a turn off, but I’m pleased with the great retention and deep carry of this design. I also am a huge fan of how ZT drilled and tapped this handle for 4 corners carry.

Deployment and Lockup

The 0550 features chunky ambidextrous thumb studs. There is plenty of room to get your thumb behind it and give the knife a nice flick. ZT selected thick phosphor bronze washers, and the knife is extremely smooth. This is a heavy blade, and it takes a little effort to get it moving with any speed, but I’ve found deployment on the 0550 to be incredibly smooth and reliable.

The 0550 features an ultra thick titanium frame lock. This is one of the thickest pieces of titanium I have ever seen used for a lock. The lock engaged early and provides a solid lockup. I am extremely impressed not only by the thickness of the lock, but by how well the lock has been designed. I typically don’t flick open framelock knives, but the 0550 seems to like it. Having flicked the knife open knife hundreds of times the lock still engages as early as it ever did. To me this is a great achievement and is a testament to how well this knife has been made.

The Hinderer lockbar stabilizer ensures that you will not over-extend the lock bar as you disengage it. This will prolong the life of your lock and is a really nice feature to see. In my video I said that the stabilizer was the cherry on top of this delicious ice cream sundae of a knife. I don’t typically have a sweet tooth, but I still stand by that statement.

Zero Tolerance 0550 Review – Final Thoughts

The ZT 0550 is an absolute home run of a knife. I love pretty much everything about this knife. The materials are great, the level of fit and finish is phenomenal, it features an awesome Rick Hinderer design, outstanding options for carry, excellent ergonomics and the best frame lock I have ever seen in a production blade. Given everything you get, it’s difficult to believe that the 0550 retails for only $200.

For some the only reasonable criticism here is the weight (and perhaps that the blade is so thick it doesn’t slice particularly well). But fans of big knives, fans of hard use knives, and fans of big hard use knives made in America will absolutely love this offering from Zero Tolerance. I am walking away extremely impressed by this knife and can easily recommend it if big tactical folders are your thing.

Zero Tolerance has truly raised the bar with this one providing a great knife and outstanding value to the consumer.

Zero Tolerance 0550 – $199.95
Retail Price: $250.00
You Save: $50.05
from: BladeHQ

I recommend purchasing the ZT0550 from BladeHQ or Amazon.com.

Spyderco Caly 3 Carbon Fiber Review

by Dan Jackson 18 Comments

Last Updated: August 7, 2019
Hands down the best part about operating a website like this, is the excuse to play around with bad ass knives like the Spyderco Caly 3.5 in Carbon Fiber. This special version of the Caly3 uses exotic Japanese laminated steel and carbon fiber handle scales to give the original Caly3 an extra touch of class. The original Spyderco Caly (short for Calypso) was introduced in 1998 and featured a 4″ blade and micarta scales. Spyderco has refined the knife over the years in their quest to get this knife to become “part of the hand”.

Buy the Spyderco Caly 3 at BladeHQ

Buy on Amazon

Before I launch into the details of this review let me just say, this knife is really nice. I got one mainly as a collectible but this thing is built like a bank vault and Spyderco considered every detail so if you intend to use the knife for Every Day Carry (EDC) it will perform. My first impressions leave me with nothing but good things to say about this blade although I will do my best to find some weaknesses for those seeking the dirt on this high end production knife.

General Dimensions and Blade Specifics

The Spyderco Caly3 CF has a total length of 7 inches, a blade length of 3 inches, weight of 3 ounces, and is made in Japan. The knife is slender with a total thickness a hair under 3/8 of an inch. These strike me as ideal dimensions for an EDC knife and I think EDC is exactly what Spyderco had in mind when they put together the Caly3. It also makes a handsome gentleman’s folder.

The blade on this knife is very interesting. It’s a standard Spyderco leaf shaped blade with a thumb hole for deployment and a long curving belly for plenty of cutting space. The blade stock starts at 1/8″ thick and it tapers down to a fine, razor sharp point. The entire blade has been given a beautiful full flat grind and a 12.5 degree edge.

The blade steel Spyderco selected for the Caly3 CF is ZDP189/420J2, a Japanese laminated steel. This is accomplished by sandwiching a piece of ZDP189 between two pieces of 420J2. The 420J2 outer layers are incredibly tough. 420J is commonly used by high end knife manufacturers for liners due to the strength and corrosion resistance of the steel. The cutting edge is ZDP189, an ultra high end steel that is extremely hard. This steel gets incredibly sharp and holds it’s edge very very well. The problem with ZDP189, is that it’s extreme hardness makes it difficult for some to sharpen.

Another potential problem with the 420J2/ZDP189 combination is that 420J2 scratches relatively easily. That said, 420J2 is very stain and corrosion resistant, so the blade is less likely to rust. For those considering the Caly3 CF for EDC, scratching will happen with any knife. Arguments on the pros and cons of the 420J2 outer layer could go on for days, so I’ll just leave it at that.

And on the subject of scratching, one concern with this knife is that the tang rubs up against the knife when deploying and you get very fine circular rubbing marks on the tang. I’ve noticed that this doesn’t only happen with my knife, others have reported it too, and from a collectors standpoint it’s a bit problematic. Perhaps these marks can be carefully buffed out; I will update the review if I try this.

A very cool result of this laminated process is that you can see where the the 420J2 ends and the ZDP189 begins. At first glance, it almost appears as if the knife has been given a saber grind, but upon closer inspection you can see that it is in fact one full flat grind.

Handle, Ergonomics and Pocket Clip

The handle has steel liners (that have been painstakingly and attractively milled out to reduce weight) and polished carbon fiber scales. The carbon fiber is lightweight and handsome however it doesn’t provide the kind of grip a textured G10 handle does. The handle does feel a little slippery when wet. Again I think if Spyderco was going for all out utility they would have selected a different handle material (they did in fact do that for their regular Caly3.5). Even with the lightweight carbon fiber the handle has a little heft to it.

As far as ergonomics are concerned, the knife has excellent jimping on both the thumb ramp and the finger choil. The design of the thumb ramp and choil make the knife fit very well in the hand. Despite the absence of textured handle scales when you are gripping the knife you feel in control, largely due to the excellent ergonomic design. The carbon fiber scales have been radiused and there are no sharp edges in the palm. I think Spyderco came very close to their goal of making the knife an extension of the hand.

The pocket clip is simple yet elegant. It is a single blackened piece of wire that is held in place with a star bolt. I like this style of clip for smaller knives because it is plenty strong and very discrete. Spyderco designed the Caly3 for tip up carry and the clip is reversible. The knife rides low in the pocket and the clip has good retention.

Deployment and Lock

The Caly3 CF uses the signature Spyderco thumb hole for blade deployment. I have found the deployment of the Caly3 to be slow. There is quite a bit of blade retention and it appears to be impossible to flick open. Maybe I need to loosen my pivot screw up? I’d love to hear some opinions. When you do open the knife it clicks in place very forcefully with a nice snap.

The Caly3 is a lockback knife and the lockback is positioned in the middle of the handle. There is absolutely zero blade play and it almost feels as if you are working with a fixed blade knife. This is one of the most solid locking knives I have handled and I am very impressed by the way this knife engages.

Spyderco Caly 3 Carbon Fiber Review – Final Thoughts

The Spyderco Caly3 CF is one hell of a knife. Beautiful materials, rock solid construction and an amazing attention to detail make this a near perfect EDC option. However, the steep price, slow deployment and non-textured handle scales may make people think twice about making this their go to blade. I will say that if you end up deciding on a Caly3 CF, you won’t be disappointed.

Spyderco Caly Prestige Knife with 3.40" ZDP-189 Stainless Steel Blade and Black Carbon Fiber Handle - PlainEdge - C144CFPE

Iconic Design: The Calypso is one of the classic mainstays that spawned numerous variations and converted legions of knife buyers to the benefits of flat-ground, thick leaf-shaped blades.
More To Love: Available now in a premium variant, is the Caly 3.5 with a ZDP-189 blade and carbon fiber handle. The Caly 3.5 combines beauty and functionality into a new Spyderco classic.
Superior Blade Steel: The leaf-shaped blade is made of three layers of steel. The core is high carbon ZDP-189 Japanese powdered steel, the outer laminated layers are softer, pliable 420J2 steel.
Pocket-Friendly: It comes with a gray carbon fiber handle and a mid-positioned back-lock. Its low-seated wire clip designed for right-hand deep-pocket, tip-up carry.
Ergonomic: Great Ergonomics means more control over the cutting edge. The Caly 3.5 accomplishes this with a substantial finger choil located where the handle and blade meet.

I recommend purchasing the Caly 3 Carbon Fiber at Amazon or BladeHQ. Thanks for checking out the review.

Boker Plus Exskelibur I (01BO001) Review

by Dan Jackson 10 Comments

Last Updated: August 11, 2019
Every now and then I see a knife that I absolutely have to own. Now, believe it or not, my collection of knives is small in comparison to the size (and value) of many knife collectors, so I like to think I exercise some “restraint” in my purchases. This might have more to do with the size of my bank account than anything else, but my point is, this knife really struck me as something special, and I bought it. I am talking about the Boker Exskelibur, a collaboration between Boker Knives and South African custom knifemakers Mike Skellern and Fred Burger.

Buy the Boker Plus Exskeliber at BladeHQ

Buy on Amazon

The Exskelibur is part of Boker’s “Plus” Line which is their line of high quality value knives. For purposes of the review I would classify the Exskelibur as a EDC knife, and perhaps even a collectors knife. I know mine wont be seeing much use even despite the very reasonable price tag – I simply want to keep this knife nice for my collection. What we really have here is a gentleman’s folder; it’s simple lines and rich titanium accents make the Exskelibur an exercise in minimalism and elegance that will feel very at home in an office or carried during a formal event.

I have found the attention to detail and build quality on this knife to be extraordinarily high. What may be most surprising to some readers is that this knife is made in China. Now, my Spyderco Tenacious review showed that Chinese manufacturing isn’t always synonymous with low quality, but the Exskelibur isn’t just well made for a Chinese knife – it’s well made for any knife.

General Dimensions and Blade Details

The Exskelibur I has a 3 5/8″ blade, an overall length of 8″ and a weight of 3.3 oz. Due to the advanced handle construction almost all of that weight is in the blade. And speaking of the blade, what a beautiful piece of steel. It’s a large and simple drop point design with a high hollow grind. The blade has been given a nice satin finish that glows under the light of my studio. What strikes me about the blade is how big it is relative to the handle. The blade to handle ratio is very impressive and has to be close to 1:1.

The steel chosen here is 440C, which is a mid grade steel that is very popular in European knives. Seeing how this is a mid range knife I was very happy to find 440C here, it is one of my favorite all purpose knife steels. 440C is capable of taking a very keen edge and my Exskelibur I came shaving sharp right out of the box. The blade is beautifully finished and has a “Boker Plus” logo on one side and a Skellern logo on the other.

Handle, Ergonomics, and Pocket Clip

The handle follows the same minimalist approach of the blade, while weaving in a couple interesting features that really elevates the style and sophistication of the knife. The handle is made almost entirely out of black G10. The G10 is very lightly textured and doesn’t offer much in the way of friction, however the there very good jimping on the spine of the knife and the handle has been contoured to allow your fingers to wrap around it comfortably. The resulting grip is very good for normal EDC tasks. I think the texturing is adequate and fits very well with the overall classy theme of the knife.

The construction of the handle is not open, a piece of G10 runs the entire back length of the handle and in between that piece and the handle slab is a thin strip of red G10. This is purely for aesthetics and is a very interesting detail that makes the Exskelibur a little special and is really quite cool.

The pocket clip is a piece of titanium that has been finished in a dark matte blue. It’s a little stiff but it performs well and is reversible for tip up or tip down carry (right side only). The clip is held in place by 3 small Phillips screws which is a bit of a departure from the allen or hex screws we often see. Another thing to note here is that there isn’t a lanyard hole in this knife. Since this is a larger EDC knife, I really don’t miss the lanyard hole, but I thought it was worth pointing out.

Deployment and Lock

The Exskelibur deploys with an unobtrusive flipper located on the back of the blade by the pivot. This is a very simple yet effective method of deployment. The blade moves easily and I find that I can quickly and easily open this knife with 1 hand. The bushings on this knife appear to be phosphor bronze and everything is very smooth. The knife opens quietly with a soft click as the blade snaps into the titanium liner lock.

There is only one liner on the Exskelibur and it is made of the same blued titanium that clip is fabricated from. It makes the knife incredibly lightweight and it provides another interesting detail that sets the Eskelibur apart. I have found the lock to be strong and it locks in the middle of the open blade with no danger of slipping.

Boker Exskelibur I Review – Final Thoughts

The Exskelibur I is an outstanding folding pocket knife. The knife oozes style and is a simple and beautiful folder. I appreciate the great design and quality manufacturing and am not put off by the fact that this knife is made in China because the quality control here is outstanding. The titanium liners, the big sweeping blade and lightweight handle are all very appealing. I think 440C was an excellent choice for bladesteel and love how big and practical the blade is. It’s hard to find fault with the knife, I think if you use it as an EDC or gents folder you will be very pleased with the Eskelibur.

Boker Plus Exskelibur I Knife

440C satin finished blade
Blue anodized titanium liner
Contoured G10 scales
Red fiber spacer
Reversible titanium pocket clip

I recommend purchasing the Boker Exskelibur at Amazon.com or BladeHQ. Thanks for reading.

Benchmade 860 Bedlam Review

by Dan Jackson 16 Comments

Last Updated: August 3, 2019
The original Benchmade Bedlam 8600 is an automatic knife released in early 2010. The knife received rave reviews across the community and this large, middle eastern inspired knife was quickly deemed to be a new Benchmade classic. However, the knife was only available as an automatic, which is totally sweet, yet not particularly practical because large automatic knives are illegal in lots of places without a military or police exception (plus there is just more stuff to break with an automatic knife).

Buy the Benchmade Bedlam at BladeHQ

Buy on Amazon

Thankfully, Benchmade understood that this knife was meant for the masses, and they recently released a non-automatic version, the Bedlam 860 that you see here. The 860 is very similar to the 8600. It’s a large blade that could be used defensively, but will probably be a collector’s item more than anything. Lets take a closer look at what makes the new Bedlam 860 tick.

General Dimensions and Blade Details

The Bedlam is a very big folding knife with a 3.95″ blade, an overall length of 9.71″ and a weight of 7.1 ounces. I know some guys have been talking about using the blade as an EDC, but the length and weight doesn’t make it practical to me. I find it more to be built as a self defense tool. The kind of specialty blade used by martial artists. Of course you could use this for whatever you want – as a collector I found it to be immensely appealing and have carried it as well.

The blade shape of this knife is very cool, and really distinct. People commonly refer to it as a trailing point blade or even a “Persian” style blade. While both of those names are accurate, in it’s place of origin this style of blade is commonly referred to as a “Jambiya”. The Jambiya is a traditional style of knife found in a lot of Middle Eastern countries. Jambiyas are also used as official Combat Knives for the country of Jordan, and it is rumored that the 860 was originally designed for the Prince of Jordan’s royal guard.

At any rate, the Bedlam has a large upswept blade with a thin swedge running along the top part of the blade and a hollow grind starting from about 3/4 of the way up. This is a nasty looking knife with plenty of attitude. If you study the tip you will notice that it is designed so that the last few millimeters of steel actually thickens as it reaches the very tip. This is known as a revere distal taper and provides extra strength for thrust cuts and stabbing. Even with the tapering it’s still a fairly delicate tip so I wouldn’t use it to pull nails or stab through cinder blocks.

The steel is 154CM which I have covered in a couple of my other Benchmade reviews. Suffice to say 154CM is a great all-around steel and was an excellent choice for the Bedlam. It sharpens easily, holds a great edge and is resistant to wear and corrosion. The entire blade is hit with Benchmade’s proprietary BK1 matte black coating. BK1 is a tough scratch resistant finish that is very resistant to corrosion. You also have the option of getting the knife in a plain (uncoated) satin finish. To me the knife looks a little naked without the coating, but it’s all a matter of personal preference.

Handle, Ergonomics and Pocket Clip

The handle of this knife is made of 2 large pieces of sculpted G10 over full stainless steel liners. The G10 scales are wonderfully sculpted and have been given an interesting tiger stripe like pattern. Underneath the liners (along with the rest of the hardware) has been given a flat black finish. The liners are partially milled out to reduce weight and place the balance point right in the middle of the second choil. There is a partial backspacer made of some sort of resin, and a stainless steel pommel that could serve as a glass-breaker or non-lethal impact device. The handle is screwed together so you could take it apart for cleaning and maintenance. Everything is secure, well aligned and totally flush.

From an ergonomics standpoint, the 860 is quite nice. You would expect a knife of this size to feel good in hand and the Bedlam does not disappoint. What interested me is the variety of grips. the two choils allow you to either choke up or sit back on the knife and really extend your reach. There is a good amount of jiming on the thumb ramp, first choil, and the pommel so the knife feels very secure. The G10 has a low to medium amount of traction to it, but given the overall size of the knife and it’s handle features, I feel very comfortable wielding this blade.

The pocket clip is given a black finish and allows for reversible tip up carry. It’s a pretty deep carry, but not super deep. Clip retention is fairly weak, which makes it easy to insert and retrieve from the pocket, but it also increases the chance of the knife falling out. It’s a delicate balance, but I do like the ease of retrieval.

As far as overall carry goes, this is a large 7 ounce knife, so you would expect to notice it. I actually found the Bedlam to carry well, and liken it to a larger tactical flashlight. Compared with the other big knives I’ve carried (like the Cold Steel Spartan and ZT 0300) the Bedlam carried very well.

Deployment and Lock

While the deployment of the 860 Bedlam isn’t as fast as the 8600 Bedlam, it is still very good. The big black blade really sings with just a flick of a thumb stud and it locks in place with authority. The ambidextrous thumb studs are big and easy to get at. There are phosphor bronze washers in this knife, so you can expect a nice smooth deployment every single time.

The axis lock is the same used in the 8600, and it was a great choice for the 860. This is a strong lock that is easy to use with one hand and is fully ambidextrous. At first, I noticed zero blade play with this knife – everything was very snug as you would expect from a Benchmade. Over time I found that the pivot loosened up a little and I started to experience some side-to-side blade play. This is pretty normal for a lot of folding knives (and not the first time this has happened with an axis-lock blade). What I did was apply some blue lock-tite to the pivot screw. This fixed the problem completely and I haven’t had issue with blade play since.

Benchmade 860 Bedlam Review – Final Thoughts

What can I say? If you are all into the Bedlam then I am here to confirm that this is a sweet knife. A big, USA made knife with rock solid construction, great materials and it looks really cool. There is a lot to like with the Bedlam. The real question is whether this is something you can get away with carrying. For some I know this will mostly be a novelty or collectible. Others might buy it with an eye towards use as a utility and self defense blade.

If you like the looks and have room in your collection, then the Bedlam is a well made knife worthy of your consideration.

Benchmade - Bedlam 860 Knife, Scimitar Blade, Serrated Edge, Coated Finish, Black Handle

HIGH-QUALITY: The 154CM stainless steel blade is tough, rust resistant, and holds an edge well. The G10 handle is durable and stable enough for a wide range of temperatures, making it ideal for tactical use.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Bedlam 860 is a manual knife that can be opened and closed single-handedly.
COMFORTABLE: The 860 is large yet is one of the most comfortable knives to handle. The reversible pocket clip offers ultimate accessibility.
FOR TACTICAL USE: The Bedlam 860's curved blade style is inspired by scimitar swords, which were used for military defense. This modern version is good for slashing and is designed for tactical applications.

I recommend purchasing the Bedlam at Amazon or BladeHQ.