• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

BladeReviews.com

Knife Reviews

Menu
  • Home
  • Reviews by Brand
    • Al Mar Knives
    • Benchmade Knives
    • Boker Knives
    • Buck Knives
    • Cold Steel Knives
    • Chris Reeve Knives
    • CRKT Knives
    • DPx Gear
    • Emerson Knives
    • ESEE Knives
    • Fällkniven Knives
    • Fantoni Knives
    • Gerber Knives
    • Great Eastern Cutlery
    • Hinderer Knives
    • Hogue Knives
    • Ka-Bar Knives
    • Kershaw Knives
    • Kizer Knives
    • LionSteel Knives
    • Mcusta Knives
    • Mora Knives of Sweden
    • Microtech Knives
    • Ontario Knives
    • Opinel Knives
    • Reate Knives
    • Rockstead Knives
    • Schrade Knives
    • Shirogorov Knives
    • Smith & Wesson Knives
    • SOG Knives
    • Spartan Blades
    • Spyderco Knives
    • Steel Will Knives
    • Strider Knives
    • Victorinox Knives
    • Viper Knives
    • Zero Tolerance Knives
    • Close
  • Reviews by Purpose
    • EDC Knife Reviews
    • Tactical Knife Reviews
    • Survival Knife Reviews
    • Hard Use Folding Knives
    • High End Pocket Knives
    • Gentleman’s Folders
    • Rescue Knives
    • Traditional Knives
    • USA Made EDC Knives
    • Close
  • Reviews by Class
    • Folding Knives
    • Fixed Blade Knives
    • Assisted Opening Knives
    • Automatic Knives
    • Machetes
    • Titanium Frame Lock Knives
    • Close
  • Best Of
    • The Best EDC Knives
    • Best Survival Knives
    • Best Tactical Knives
    • Best High Value Knives
    • Close
  • Gear Reviews
    • Flashlight Reviews
    • Multi-Tool Reviews
    • Watch Reviews
    • Knife Sharpener Reviews
    • Close
  • FAQs
    • Knife Care and Maintenance
    • Knife Dictionary
    • Knife Steels
    • Steel Composition
    • Interviews
    • Close
  • Contact
  • About
    • About
    • Privacy
    • Links
    • Close

Spartan Blades

Spartan Blade Works Pallas Review

by Dan Jackson 8 Comments

Last Updated: August 8, 2019
Most of us who have been following Spartan Blades know the company started with high end fixed blade knives. A few years ago they launched the Akribis, a carbon fiber clad titanium framelock folder. I always appreciated the lines of the Akribis, but never got around to acquiring one. Although some of their old stock is still for sale on select retailers, Spartan Blades has since moved on from the Akribis and ventured into a number of different folder offerings.

Spartan Blade Works Pallas Review
Buy the Spartan Blade Works Pallas at BladeHQ

Perhaps their most notable new folder is the Pallas. This strikes me as their every man’s model: a sub 4″ blade, anodized aluminum handles, sturdy button lock, and your choice of flipper or thumb studs to get the blade open.

This is a less exotic folder designed for daily carry and use, and could be considered their version of a Griptilian or Para 2. I have always had a soft spot for utility knives in this size range, and have many in my permanent collection. How does the Pallas stack up against everything that has come before it? Lets find out.

General Dimensions and Blade Details

The Pallas has an overall length of 8.75″, a 3.75″ blade, weighs 4.9 ounces, and is made in the U.S.A. With an almost 4″ blade, my guess is that Spartan Blades wanted the Pallas to flex both into utility and folding combat knife roles. It is about as big a folder as I can realistically carry. Any bigger, and it would be more of a novelty for me, but a 8.75″ inches I can comfortably carry it and use it as a weekend warrior EDC here in Southwest Florida. I’ve used it extensively in that role. It has accompanied me on trips to fix up my rental house, and plenty of forays into the yard trimming back our “jungle”.

Spartan Blade Works Pallas

The blade of the Pallas is a modified drop point. This is a simple and functional design, but Spartan Blades has added their signature harpoon tip to give it a twist. At just under 4mm thick, the blade stock is substantial, but the knife is ground thinly behind the edge with a high hollow grind. When you add a fine tip and plenty of belly, you are left with a versatile and functional blade. Spartan Blades also took the extra steps of adding a long swedge across the harpoon tip, chamfering the spine of the blade, applying a nice stonewashed finish, and installing custom thumb studs.

Spartan selected S35VN blade steel for the Pallas. As I have mentioned in countless other reviews featuring S35VN, this is a great choice for a high end folder due to it’s ease of sharpening, corrosion resistance, toughness, and edge retention. It’s a great all round steel. It won’t hold an edge indefinitely, but it’s easier to sharpen then its older brother S30V. It’s no wonder companies like Chris Reeve Knives choose S35VN almost exclusively as their blade material.

The only downside I see to S35VN is that it forces knife reviewers to the very fringes of their creative writing capabilities as they tackle their XXth review featuring this now common blade material. As always you can find a deeper dive into blade steel in our blade steel section

Spartan Blade Works Pallas Top Down

In practice I found that the Pallas is a solid cutter. Thanks to a generous handle, you are able to make full use of the substantial blade. It came razor sharp out of the box, and I have spent a good amount of time breaking down boxes, carving, and even performing some mild food prep with this knife. This knife cuts for days, and the performance is impressive. While it’s not the most unique or beautiful blade I have worked with, you can’t argue with the results. The Pallas performs.

Handle, Ergonomics, and Pocket Clip

The Pallas comes with a hard anodized aluminum handle, held together by 3 custom standoffs and the pivot. The handle is mostly flat. It has been chamfered around the edges, features 2 grooves for your index finger, and a series of diagonal cuts towards the butt for traction, but there is no 3-D milling. Overall, handle construction is neat and solid. Even the lanyard hole has been given extra attention.

Spartan Blade Works Pallas Handle

That said, this handle loses style points in a few areas for me. First, I don’t care for how the logo and “U.S.A.” have been applied to the handle. I realize that this branding and source of manufacture information needed to be placed somewhere, and there is only a limited amount of real estate on the knife. I also know some have criticized companies like Zero Tolerance for putting too much text on their blades, distracting the eye and complicating the design. Still, I think the placement of the logo and “USA” on the handle looks a little random.

Also, I think a more generous decorative pivot would have looked nicer here then just a body screw. This choice was likely made so the end user doesn’t confuse the button lock with the pivot in the heat of the moment. Plus a decorative pivot does nothing for the performance. But many knives these days feature a decorative pivot. Finally, when you peer into the internals of the knife the pocket screws are a millimeter or proud of the handles. Screws poking out from inside the handle/liners are a pet peeve of mine, and I would love to see the screw length adjusted slightly so they don’t poke out like that.

Spartan Blade Works Pallas Ergonomics

Aesthetic quibbles aside, the simple handle designs provides ample room for your hand and fingers while the hard anodized aluminum provides you with that familiar fine texture. There is light jimping on the spine of the blade, and more aggressive jimping towards the butt of the handle. The end result is a knife that functions naturally in the hand. While hard anodized aluminum isn’t as grippy as peel ply G-10, I find there is plenty of traction here for all the tasks I put the Pallas up to.

The Pallas benefits from a simple pocket clip that has been thoughtfully executed. This is a humble spring clip, but it has been elevated with Spartan’s arrow motif cut into the clip. I vastly prefer this kind of branding over a “billboard” style pocket clip. The clip has been sunk into the handle and secured with 2 screws. It’s not likely to go anywhere. However, the handle is configured for right side tip up carry only. This happens to be my preferred placement for carry, but it may pose an issue for some.

In practice the Pallas carries nicely. It’s a bigger knife, but is relatively thin and light. I don’t notice it much in the pocket. It stays out of the way, but doesn’t carry super deep. When I’m ready for the knife the combination of handle and clip make for an easy retrieval. What else can you ask for?

Spartan Blade Works Pallas Pocket Clip

Deployment and Lockup

The Pallas comes with a combination of flipper and thumb studs to get the blade open.

Lets start with the flipper. Because this is a button lock, there is no detent. Instead, the button lock is engineered to offer some resistance, and that friction in the lock allows you to pop the knife open. In practice the flipper works most of the time, especially if you are careful to pre-load it. Still, this knife will not flip open like a well tuned framelock or liner lock flipper. I would assign it a “4” on my arbitrary 1-10 scale of flipper performance, placing it slightly below my Spyderco Domino. It usually gets the job done, but nothing to write home about.

The thumb studs are ample, custom made, easy to access, and placed for ambidextrous access. These thumb studs are what you would want to rely on in a stressful situation. I’m glad Spartan Blades included them. They compliment the workman like nature of this knife.

Either way you choose to open the Pallas, the blade rides on caged bearings. The action is smooth and fluid.

Spartan Blade Works Pallas vs. Hogue EX-04

Spartan Blades selected a button lock for the Pallas. The button looks similar to what you would find on a Hogue, and I can’t help but place the knife next to my EX-04 (shown above).

Button locks have the potential to be sticky, but the lock on the Palls is extremely smooth. I have yet to have the lock stick or bind up. I have owned this knife for several months now and it’s just as easy to operate as the day I got it. A nice benefit to a button lock is that it is a strong lock. Although every folding knife has its breaking point, I do not hesitate to use my Pallas for tough jobs. There is no blade play or wiggle in my knife. Also, I should note there is no secondary lock like you find on the Hogue series.

Blade centering is perfect on my knife.

Spartan Blades Pallas Review – Final Thoughts

The Pallas is a no-nonsense tool in the same vein of many of my favorite utility knives. This includes fan favorites like the Para 2 and Griptilian, but also some of the unsung heros in my collection like the American Lawman, Buck Marksman, and Hogue EX-04. I don’t hesitate to carry and use the Pallas just like those other knives. The practical design, excellent tolerances, and quality materials, mean that the knife works, and it works well. If I’m in a rush I can grab the Pallas knife knowing it will do everything I need it to do – no questions asked.

Where the Pallas falls a short for me is with some of the aesthetic details like the placement of the logo on the handle. The flipping action also leaves something to be desired. For a knife you are going to use hard I can look past these issues, but would not be so forgiving if I was buying a collectible.

Also, at nearly $300 the Pallas isn’t cheap. It’s a serviceable design, nicely made, and performs beautifully, but it doesn’t have any mind blowing properties to it, and the materials are not particularly exotic. I realize that Spartan Blades is a boutique company that is offering a USA made product, and they likely lack the economies of scale that the bigger manufacturers can tap. Still, the Pallas is an expensive knife, and the price will prevent it from obtaining the mass appeal of a Paramilitary 2 or Griptilian.

In closing, I like this knife, but think the Pallas is for a narrower market. I recommend it if you are a fan of Spartan Blades, a fan of the design, or are looking for a high end and high performance tactical knife that is made in the USA.

Spartan Blades Blacked Out Pallas Folding Flipper Knife Button Lock Black SF3
Spartan Blades Blacked Out Pallas Folding Flipper Knife Button Lock Black SF3
  • Overall Length: 8 3/4" Blade Length: 3 3/4" Blade Material: CPM S35VN Stainless Steel, 58-60 HRC
  • Blade Thickness: 5/32"; Blade Finish: Black PVD Tungsten Black DLC; Blade Type: Plain Edge Drop Point
  • Closed Length: 5 1/8" Handle Material: Black Mil Spec Anodized Frame
  • Safety System: Button Lock; Carry System: Pocket Clip
  • Weight: 4.736 Oz.; Made in the US
Buy on Amazon

I recommend buying the Spartan Blades Pallas at Amazon, BladeHQ or KnifeArt. Thanks for checking out the review.

Filed Under: EDC Knives, Folding Knives, Made in the USA, Rescue Knives, Spartan Blades, Tactical Knives Tagged With: aluminum, Button Lock, drop point, S35VN

Spartan Blades Metis Review

by Grayson Parker 1 Comment

Last Updated: September 7, 2019
Few companies have the pedigree that Spartan Blades does. I rarely hear them pop up in conversation among gear geeks, but that hasn’t stopped them from accumulating a small hoard of Blade Show awards. Between the aforementioned awards and the extensive Special Forces resumes of the two founders, I’m surprised they don’t get more chatter. Maybe they do, just not among folks I know.

Spartan Blades Metis Review
Buy the Spartan Blades Metis at BladeHQ

No products found.

As Dan covered in his review of the Horkos, Spartan’s reputation is firmly grounded in its fixed blades and (though I hate the overuse of the term) “tactical” folders. This reputation was so entrenched that when I was offered a Metis in trade, I had to triple check the dimensions. There was no way Spartan made a sub-3” blade…right? Curiosity piqued, I went ahead with the trade. How would an everyday carry knife designed by former Special Forces handle mundane tasks? The short answer: better than I expected, given recent trends among overbuilt folders.

General Dimensions and Blade Details

The Spartan Blades Metis is close to my ideal size for a pocket folder. It features a 2.7” blade housed in a 4” handle, and the entire package (sans clip) weighs in at 2.79 ounces. Those numbers look pretty good, especially when you consider the all metal construction. A knife this size is well suited to a range of everyday tasks, from opening packages to light food preparation. It’s also legal to carry in a wide range of jurisdictions, as it falls under the common 3” blade limit.

Spartan Blades Metis Closed

If there is one aspect of the Metis that grabs my attention, it’s the blade shape. Most folks would probably call it a drop point, but the dip along the spine gives it something akin to a harpoon’s profile. Whatever the nomenclature, it’s fantastic. There’s enough belly for slicing cuts, but not so much that the edge slides out of the cutting medium during push cuts. The harpoon-ish profile – in addition to reinforcing the tip of the blade – leaves a dip in the rounded spine that’s a perfect resting place for a thumb.

Spartan Blades Metis vs. Chris Reeve Mnandi

For enthusiasts, Crucible’s S35VN is no longer news. In fact it pretty much serves as a benchmark against which we compare other steels. It has a proven track record as a “do-everything” steel: it chips less and is easier to sharpen than its predecessor S30V, with comparable or better edge retention and rust resistance. I didn’t strenuously test the steel in this case, but I was mostly using it as a gentleman’s folder, and it hasn’t needed any maintenance in the few months that I’ve had it.

Spartan Blades Metis Blade Centering

When I did use the Metis, it outperformed my expectations. No, it didn’t pass the apple test, but it did well enough that my insensate pinky never started twitching nervously. It behaved similarly while breaking down cardboard boxes: not the best, but good enough to flex into the role. The old saying “jack of all trades, master of none” is appropriate here.

Spartan Blades Metis Cutting Apples

Handle, Ergonomics, and Carry

There’s not much that can be said about the handle of the Metis. Like so many of its competitors, it’s another slab-handled, titanium-on-titanium knife. So what makes the Metis stand out in a crowd? That’s difficult to answer. The show side of the Metis is beautifully simple; between the milled backspacer and the singular visible screw, it seems almost hewn from titanium. The lock side couldn’t be more different. Every screw that was hidden on the show side is plainly visible, and the milling for the lock bar in conjunction with the overtravel stop give it an aesthetic not far off from a circuit board. With that in mind, it’s arguable that Janus is as fitting a namesake as Metis.

Spartan Blades Metis Ergonomics

Ergonomically, the Metis ranges from unoffensive to pleasant, depending on the task. It never stood out as being great, but neither did it stand out as being horrible – which surprised me given the odd placement of hard angles. If the knife is resting in your fingers, chances are you’re not gripping it so tightly that the angles will have an impact on the ergonomics. By contrast, if you’re gripping it so tightly that the angles would matter, you’re probably holding it farther back in your palm where the angles won’t cause any hot spots. At least, that was my experience. The generous chamfering and subtle curve of the handle are certainly factors here.

Spartan Blades Metis Ergonomics II

The best I can say about the pocket clip on the Metis is that I understand some of the design impulses behind it. It’s attractive and fits the overall aesthetic. The screws for the pocket clip are hidden (meaning they screw in from the interior), which is a nice touch, though it makes removal inconvenient. In slacks, dress pants, or particularly thin jeans, this pocket clip works fine. Beyond that, the news isn’t as nice. The clip doesn’t have much spring to it, so to compensate it doesn’t make contact with the handle scale. Ultimately, this restricts the number of ways to comfortably carry the Metis.

Spartan Blades Metis Pocket Clip

Problems with the clip aside, the Metis is a pretty quiet pocket companion. Most of the time I carried it in the leather slip I use for traditional knives, and while it was a bit of a tight fit, the slip ensured that the Metis didn’t slide out of my pocket or roll to the bottom and cause discomfort. I’d have preferred to carry this with a clip, but it wasn’t onerous to forego it. My CRK Mnandi has a great pocket clip, but I still carry it in a pocket slip more often than not.

Spartan Blades Metis in a Slip Sheath

Deployment and Lock-Up

The blade of the Metis is deployed solely by the flipper tab. As the entirety of the blade is housed within the handle, there is no pinch point which would facilitate two-handed opening. Though slightly disappointing – it’s always a feature I like to have on a “dress” knife – I can’t fairly complain, as a wider blade wouldn’t carry as well. This flipper is meant to be pulled (like a light switch) rather than pushed. Deployment is thoughtless, reliable, and doesn’t generate discomfort, even if you’re using the Metis as a fidget toy.

Spartan Blades Metis Closed

The ease of deployment is in part thanks to the caged bearings the blade rides on. I’m of two minds regarding the use of bearings in folding knives: on one hand, they allow for silky smooth pivots, but on the other they’re far more susceptible to grime and grit than traditional washers. (Addendum: I’ve been informed that I may be wrong on this account. More information is welcome in the comments.) On a knife like the Metis caged bearings are fine. A knife this size is clearly in the “EDC/gentlemen’s” category, and not intended for hard use.

Spartan Blades Metis Flipper Tab

At this point, there’s not much that can be said about a well-executed framelock, and the lock on the Metis certainly qualifies as such. The lock face consistently engages 50% of the blade tang, disengaging the lock is easy, and there’s only a fraction of a hair of wiggle in the lock, which vanishes in use. A steel lock insert could fix that, but the only titanium framelock I’ve ever handled that doesn’t have that slight amount of play is the Mnandi, and that knife certainly isn’t being flipped open like the Metis.

Spartan Blades Metis Titanium Framelock

Spartan Blades Metis Review – Final Thoughts

Currently, it’s difficult to find a Metis in stock anywhere. My understanding is that this design hasn’t been discontinued, Spartan just hasn’t released any batches recently. Hopefully when Spartan comes back to it, they do so with an eye towards improvement, because there are a few changes that I’d like to see. The bones of a truly great knife are here, and it wouldn’t take much to flesh it out.

Spartan Blades Metis

First, the pocket clip needs to be redesigned. A nondescript spring clip with outside accessible screws would be far more functional. Second, eliminate the overtravel stop by incorporating a steel lock face into the frame lock. This would eliminate the scant play there is and clean up the lock side of the knife. Those two changes would improve the function and form of the Metis, and (designing and retooling costs aside) I can’t imagine it costing more to produce than the current design. By moving away from a sculpted clip, it may actually cost less.

Spartan Blades Metis Pocket Dump

When they were available, the Metis sold for $340. That’s quite a bit of money – especially for a pocketknife – and the competition is stiff. The obvious comparison is the Small Sebenza. I can’t make a direct comparison (I’ve never owned a Sebenza) but I do own an Mnandi. The best way I can describe it is that if the Metis is practically flawless, the Mnandi is flawless. Of course, no Chris Reeve knife has a flipper, so Spartan is ahead of the game in that department.

Is the Metis still worth buying in the meantime? If you can find one, and if the design speaks to you, I’d say yes. It’s well made, attractive in its own right, and can flex into a number of different roles. If my complaints dissuade you, I’d recommend keeping an eye on Spartan Blades in the meantime.

No products found.

I recommend purchasing the Spartan Blades Metis at BladeHQ, KnifeArt, and Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: EDC Knives, Made in the USA, Spartan Blades, Titanium Frame Lock Knives Tagged With: bearings, flipper, S35VN, titanium

Spartan Blades Horkos Review

by Dan Jackson 3 Comments

Spartan Blades has a reputation of producing a premium product geared towards military applications. Founded by a duo of retired Special Forces operatives, I always considered Spartan Blades to have a unique position in the market. Their approach is simple: manufacture high end fixed blade combat knives in the USA out of premium materials.

Spartan Blades Horkos
Buy the Spartan Blades Horkos at BladeHQ

No products found.

The only other company that shares this approach and readily comes to mind is Chris Reeve, and CRK is best known for their folding knives. Spartan Blades has since branched out into high end folders, but I will always associate Spartan Blades with high end fixed blades.

And the Horkos is arguably Spartan Blade’s flagship fixed blade knife. It may not be the most expensive, but it strikes me as their most approachable model and emblematic of their lineup as a whole. This knife was apparently commissioned by the Combat Weapons Team of the United States Military Academy in West Point, NY and is given to graduates of their elite program. A review of a Spartan Blades knife is long overdue, and given its pedigree the Horkos almost begs for evaluation.

This knife was provided to me for review by Spartan Blades.

General Dimensions and Blade Details

The Horkos has an overall length of 10-7/8″, a 5-11/16″ blade, and weighs 9 ounces. Like all Spartan Blades the Horkos is made in the USA. This is a combat / utility knife. Versatility is the name of the game with a combat knife. Obviously it needs to be capable in a defensive role, but most of the time the knife will be used for utility work. So it needs to be a practical knife, but still capable in a defensive role. I consider the Horkos to be an evolved Ka-Bar USMC knife.

Of course I’m a mild mannered suburbanite, so my experience with the Horkos has been purely as a utility knife. And thankfully the Horkos is a practical enough tool that I could effectively test it.

Spartan Blades Horkos

The Horkos sports a modified drop point blade with a dramatic harpoon tip. Spartan Blades has incorporated the harpoon tip on a number of their designs. It’s a nice aesthetic touch and lends a nod to the Spartan warriors that the company was named after. Beyond the harpoon tip you have a fairly typical partial flat grind and swedge. There is a little bit of belly, a nice strong tip, and plenty of cutting edge. The grinds on this knife are beautiful. In fact, all the machining is top notch. My favorite feature of the knife is that all the edges have been chamferred. This detail provides a premium feel and distinguishes the Horkos from all the other knives in my collection.

The Horkos is made from a single piece of S35VN steel. Although I have tested dozens of folders with S35VN blades before, this was my first experience with a fixed blade in S35VN. At 3/16″ (~4.75mm) thick, this is a substantial knife. I have come to appreciate S35VN in folding knives, but was unsure how it would hold up in a knife like the Horkos. After all, a blade of this size will need to hold up to the rigors of chopping, prying, and perhaps even batoning.

Spartan Blades Horkos

Spartan Blades offers the Horkos in a black DLC coating or a tan Zirconium Nitride (ZrN) coating shown here. Although the ZrN coating is described by Spartan as a “flat dark earth” color it seems to me more like a metallic brown gold. It has an almost etheral sheen to it. It’s subtle, but also totally different from something like a flat brown powder coat.

I was curious to see how this ZrN coating and the S35VN blade would hold up under use. I first used the knife on some cardboard. This is a thicker grind, and thick stock, but the keen edge cleaved through cardboard as you would expect it to. You will never mistake the Horkos for a kitchen knife, but it cuts cleanly and gets the job done. The coating and edge both held up fine.

Spartan Blades Horkos

I then worked with the Horkos on some seasoned oak logs that I keep for camp fires and grilling. The grind on this knife is pretty stout, but it handled the oak capably, shaving away the bark and and then peeling off thick curls of wood. I chopped quite a bit, performed some light batoning, and then moved to a large stump of grapefruit wood. Grapefruit is much softer than oak, but it allowed me to drive the tip of the Horkos deeply into the stump and test the tip strength. There was no edge deformation and the tip held up perfectly.

I have since used the Horkos on several other occasions. Mostly breaking down boxes and prepping wood for fires. It continues to be a capable tool.

The ZrN coating also held up well. There is some light surface scratching (perhaps from rubbing up against bits of sand on some of the wood), but the coating remained largely intact. It didn’t peel off like a teflon coating or flatten out like a powder coating. ZrN is a premium coating and I’d say it performs close to DLC. I also like how this coating does not bind up or effect the cutting ability of the knife.

I am keeping this knife for long term testing and will update the review as I gain more experience with this knife.

Handle and Ergonomics

The Horkos is a full tang knife overlayed with textured micarta handle scales. Once again everything has been thoughtfully designed and meticulously executed. I cannot find fault with the material selection or the fit and finish of this knife.

Spartan Blades Horkos

The scales on this knife have a large diamond pattern texture to it. I was concerned that this would make the knife uncomfortable to use. In fact the number of ergonomic features on this knife had me concerned: the beak of the pommel, the finger groove on the handle, and the saw cut jimping on the thumb ramp, and this aggressive diamond texture. I was pleasantly surprised to not develop any hot spots after extended use. While this won’t handle like a purpose built bushcraft knife, it still handles well. All the ergonomic features aided in the grip rather than getting in the way and I walked away from my testing sessions appreciating the Horkos more.

Spartan Blades Horkos

Sheath

The Horkos comes with your choice of a Kydex or Nylon sheath. My particular knife came with a nylon sheath in multi-cam. This is one of the most robust nylon sheathes I have owned. This is high denier nylon, triple stitched, molle capable, and threaded with paracord. The retention strip is adjustable and backed with velcro. This is a high quality sheath and strong departure from the bargain bin cloth sheathes you get with budget knives.

Spartan Blades Horkos

The plastic insert is lined with what appears to be the loop side of velcro. This gives the knife a secure friction fit, even if you don’t use the retention strap. There is a velcro lined belt loop at the top of the sheath, and a thick plastic D-ring at the bottom, so you can carry this knife in a number of different ways.

Spartan Blades Horkos

The kydex sheath is a $30 option and is probably worth the extra money, but I think as far as nylon sheathes go this is about as good as it gets.

Spartan Blades Horkos Review – Final Thoughts

The Horkos is an impressive combat knife. At over $300, this is a high-end product. The materials are top notch, every detail has been considered, and the knife performs. I think this is an instance where you get what you pay for. It’s overkill for a backyard bushwacker like myself, but if I needed to carry a combat knife on a daily basis I think the expense is easily justified. You certainly get something more for your money over a $100 knife.

I have enjoyed experimenting with a 10″ S35VN fixed blade. I continue to be impressed by the qualities of this steel. The combination of good edge retention and easy sharpening make it tough to beat. And I was also pleasantly surprised by the mild nature of the handle.

Spartan Blades Horkos

If I had to pick apart the Horkos, I think my approach would be more of a general commentary on combat knives. Combat knives ride that precarious line between utility and defensive use. It’s an exercise in compromise, and compromise by it’s very definition won’t leave everyone 100% happy. If you are looking for a pure utility knife to split wood all day I might suggest an axe or a Fallkniven A1. If you are looking for a straight up fighting knife, then the something like a ROSarms Kisten would probably be a better option.

But the Horkos still does a good job of riding that line between practical and tactical. There is no compromise in the materials, and the design is refined enough to get all manner of jobs done. If you need a tough, do it all utility / combat knife then you will be hard pressed to find a finer tool than the Spartan Blades Horkos.

No products found.

I recommend buying the Horkos at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Camp Knives, Fixed Blade Knives, Made in the USA, Spartan Blades, Tactical Knives Tagged With: Made in USA, micarta, S35VN

Primary Sidebar

Follow Us on FacebookFollow Us on TwitterFollow Us on YouTubeFollow Us on RSS

Subscribe to Email Updates and Never Miss a Review (No Spam)!

Enter your email address:

Delivered by FeedBurner

Shop BladeHQ

Shop Outdoor Gear on Amazon

Shop KniveShipFree.com

Search BladeReviews:

Best of BladeReviews:

Best EDC Knives
Best Survival Knives
Best Tactical Knives
Best High Value Knives

Copyright © 2025 · Log in