Benchmade

Benchmade Mini Bugout Review

Last Updated: July 17, 2021
If you have handled the original Benchmade Bugout, then it won’t take any explaining to understand why the Mini Bugout is such a big deal. The original Bugout was a home run for Benchmade. Slim, lightweight, capable, and attractive with its classic drop point hunter lines and vibrant blue handle.

Buy the Benchmade Mini Bugout at BladeHQ
Buy on Amazon

So the thought of shrinking down the full size Bugout to something approximating the dimensions of a Mini Griptilian is a no brainer. The question is whether it works. Most of the time you can’t simply shrink down a knife and expect it to feel and perform properly. Did Benchmade get it right with their Mini Bugout? That’s the eternal question.

General Dimensions and Blade Details

The Mini Bugout has an overall length of 6.49″, a 2.82″ blade, and weighs 1.5 ounces. Captain Obvious tells me this is a thin, light, and small knife. It’s perfect for EDC. It would be a great choice hiking, perhaps as a backup knife depending on what you are asking of your blade. The high visibility orange handle seems to suggest it was designed with outdoor use in mind. Personally, I use it for urban EDC, but in a situation where “ounces equal pounds, and pounds equal pain” this knife should save you some pain.

Here’s a size comparison with the full size Benchmade Bugout:

An obvious comparison would be with the Spyderco Dragonfly II. I’ve referred to the Dragonfly II as a “magic trick” in the past, and the Mini Bugout helps illustrate that point. While the Mini Bugout is very small, the Dragonfly II is still smaller thanks to it’s curved handle and finger choil. The DF2 is just a crazy small knife and it’s amazing that it still offers a full grip and all the utility of a larger folding knife.

Here’s the Mini Bugout next to the Dragonfly 2:

The blade is the same simple drop point on the full size Bugout. It has been shrunken down, but it’s still a lot of blade. That is one place where it outshines the DF2; you are getting a significantly longer blade, which could be more useful in some situations. That long blade is paired with a thin full flat grind and a simple swedge. The end result is excellent slicing blade geometry and a good tip.

My particular knife came with a blade made of S30V steel. S30V is now considered to be a classic stainless steel. Back in the day it was almost considered a super steel. It’s still a good upgrade over budget blade steels like 440c, AUS 8, 8Cr13MoV or even VG-10 and 154CM.

I have found that the heat treat plays a significant role in S30V. Obviously a good heat treat is significant for any knife, but I’ve found S30V blades on factory knives perform differently. For example, I’ve always considered the S30V on my Para 2 and Sage 1 to be reluctant to sharpen. In contrast, Benchmade heat treats their S30V in a way that is much easier to sharpen. That combined with their thin blade and edge geometry make their S30V blades a blast to use. For example, their old Volli model is a beast of a knife in S30V. All this to say, Benchmade seems to have mastered S30V and the Mini Bugout is no exception.

I’ve used mine mostly for opening packages. Lately I have been doing a lot of bulk buying and re-selling (of all sorts of things), so I’ve been working with a lot of cardboard. Whether that’s opening packages, resizing packages, or breaking down boxes, I have gone through an inordinate amount of cardboard in addition to my usual every day carry tasks. The Mini Bugout has been a laser. It is excellent at slicing, is easy to control, it holds a great edge, and is simple to sharpen. If you want a lightweight user this little Bugout will get the job done with style.

Handle, Ergonomics, and Pocket Clip

The handle is a shock of bright orange Fiberglass Reinforced Nylon (FRN). You will have a harder time misplacing this knife, and it’s a great choice if you are going to take this knife camping. Benchmade also offers the knife with a white handle. That could be a cool. I’ve never owned a white knife before, and wonder how it will hold up with use. Hopefully they will offer some more colors in the future.

Inside the handle you have tiny steel liners. Contrast that with the heavier Mini Griptilian, which has steel liners stretching almost the entire handle. Despite the short liners, the Mini Bugout is still extremely rigid. That is likely due to the way they placed the standoff, and the engineering of the handle.

And much like the full size Bugout, Benchmade color matched the standoffs and thumb stud. That gives the knife almost a jewelry like quality. It’s a little thing, but I think it’s nice touch that you don’t see on many knives at this price point.

I had concerns regarding the ergonomics of the Mini Bugout. You can’t always shrink down a knife handle and expect it to work. In this case, it works. The Bugout had a simple handle design to begin with, which allowed the good ergos to shrink with the rest of the design. There is room for a full 4 finger grip (just barely), and Benchmade has used an appropriate amount of texturing. Mild jimping, diamond plate, and a soft texture to the rest of the handle all come together to offer grip without gripe.

Let’s turn to the pocket clip. It’s the exact same clip found on the full size Bugout. It’s a black oxidized deep carry clip. This is a shorter clip compared with Benchmade’s standard offering found on models like the Griptilian, but it still gets the job. And if you like deep carry clips, then you might say it gets the job done better then Benchmade’s standard clip.

Here’s your in the pocket shot:

As you can see the knife disappears into the pocket. It is uber discreet. And the clip has excellent spring retention as well. The knife is held firmly in place and doesn’t float around. As for how the knife carries, well, I hardly notice the knife. Much like the Dragonfly II I quickly forget it’s there until the time comes to use my knife. The original Bugout carried well, but it was a longer knife so it took up some real estate. This Mini Bugout is even less noticeable.

Deployment and Lockup

Like many Benchmade knives, the Mini Bugout comes with dual thumb studs and an axis lock. The thumb studs are easy to get to, and the blade pops out with the flick of a thumb. This knife comes with phospher bronze washers and the action is smooth and reliable. Really there isn’t much novel about the thumb studs or washers here. It’s exactly what you would expect if you have owned a Benchmade like this before.

And the Axis Lock is just like all the other axis lock knives I have owned. It works great, and continues to be one of my favorite locks. In fact, I think Benchmade may have made tiny improvements over the years as this knife has absolutely no blade play, up or down. In the past a common critism is that Axis lock knives would have a little side to side blade play in them. I wouldn’t be shocked if that developed over time, but I’ve actually used this knife pretty hard.

We have had a lot of rain here in Florida, and our stand of bamboo in the back corner of the yard has started sending out runners all over the place. Within a few days you can have a 6 foot tall bamboo shoot sprout up. A few dozen of them came up in our yard and I used the Mini Bugout to slice through them. Probably a bit much for a little knife like this but the Mini Bugout was up to the task.

Here’s a parting size comparison with the Benchmade Mini Griptilian:

I like both knives, but the Mini Bugout is even thinner and lighter. Personally, the Mini Bugout gets the nod over the Mini Griptilian.

Blade centering is off by a hair, but still acceptable in my book.

Benchmade Mini Bugout Review – Final Thoughts

The Mini Bugout is a smaller version of the already great Bugout. And the nice thing is that you don’t give up much with this smaller knife. I have done everything with the Mini Bugout that I would have done with the original Bugout, and I suspect that’s going to be the same story for a lot of people. Sure, there is the occasional use case where it’s better to have a bigger folding knife, but for most tasks you will be fine with the Mini.

The knife is well made from premium materials. Fit and finish is great, and there are enough details to make it feel special. Unless you have Andre the Giant sized hands, I suspect you will find this Mini Bugout to be fully functional. It’s everything you need and nothing you don’t. It’s a great ultra light EDC piece and I can easily recommend it.

Benchmade Mini Bugout – From $250.00
From: BladeHQ

Sale

Benchmade - Mini Bugout 533 Folding Knife with Orange Grivory Handle (533)

LIGHT AS A FEATHER: And incredibly tough; Ideal for hiking, camping, and backpacking, and made for everyday use; A lightweight, go-anywhere tool
CPM-S30V STEEL: For first-rate edge retention and corrosion resistance; Precision drop-point construction for strength and versatility. Factory in Oregon City, Oregon.
FULLY AMBIDEXTROUS GRIVORY HANDLE: Has an ergonomic textured grip and is molded from glass-filled nylon for superior durability.
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Reversible clip; Lanyard hole for versatile carry options.
YOURS, FOR LIFE: Benchmade will re-sharpen your knife to a factory edge for free, for the life of the knife. Benchmade LifeSharp services includes cleaning, oiling, adjustments, and re-sharpening.

I recommend purchasing the Benchmade Mini Bugout at BladeHQ or Amazon. Thank you for reading.

Benchmade Infidel Review

by Dan Jackson 6 Comments

To be completely honest, my first association with the Infidel is nutnfancy. I recall his video review from years back. He may have replaced it with this one. The Infidel struck me as a cool knife, but a total novelty piece. At the time I watched his videos, buying a $400 automatic out the front pocket knife was exceedingly low on my list of priorities.

Buy the Benchmade Infidel at BladeHQ

But I’ve slowly gotten more into automatic knives. They are a sub-niche of the already niche hobby of knife collecting, but it’s a sub niche I’ve enjoyed exploring. For a layperson like myself, I see them more as a novelty than a daily carry tool, but the novelty has yet to wear thin. After checking out a few Microtech OTFs I’ve decided to venture into the realm of the Infidel, Benchmade’s flagship automatic.

General Dimensions and Blade Details

The Infidel has an overall length of 8.95″, a 3.95″ blade, weighs 5.00 ounces and is made in the USA. This is a big knife. Compared to the Halo VI it isn’t, but compared to everything else in my collection this this an objectively large knife. Benchmade offers a mini version, which may be better for daily carry, if you can carry it. This full size Infidel has a certain heft in the hand, and it stretches out in an instant. Definitely a piece for the professionals or the collectors.

Benchmade does make a Mini Infidel with a blade a little over 3″. I haven’t handled one, but it looks a little more pocketable.

The blade is a spearpoint affair, double edged and hallmarked by a long fuller that descends down the blade, terminating in a shape that resembles either a heart of set of dog testicles. The edge is applied to only the button side of the blade, a chisel edge not unlike an Emerson. Speaking of edges, the have been almost perfectly applied. This was either done by a robot, or some had an exceptionally steady hand at the grinding wheel. The 4 flat grinds are also all beautiful. Totally even and symmetrical. The blade has been well done.

You have a choice or an uncoated blade, or coated in Benchmade’s black BK1 coating as shown here. All things equal I would have preferred an uncoated blade, but I won’t complain about this coated option. It subdues the knife a bit and suggests that the Indifdel is strictly for business. Of course in my case “business” entails opening an especially stubborn bag of Cheetos, rather than assisting an outspoken insurgent shuffle his mortal coil, but as Nutn’ would say “your mileage may vary.” Indeed, Dude. Indeed.

Benchmade offers the Infidel in D2 steel. Back in the day when this knife first came out, D2 would have been a fine choice, but today it’s considered more of a budget steel, and we are even seeing it appear on bargain knives like the Rat 1. Benchmade needs to revisit this and update the blade steel.

My reasoning for this is that D2 has a reputation for being stubborn to sharpen. I believe that reputation is deserved with Benchmade’s heat treat. My 710 is a workhorse, but it’s a bitch to sharpen that recurved D2 blade. On the flip side, D2 has good edge retention and excellent toughness. It can be a real workhorse steel if you know how to keep it sharp, and the story goes that heat treat wizards like Bob Dozier have been able to heat treat D2 in a near mythical fashion that transcends what you get with a Benchmade.

But I’m writing this review at the end of 2019. In a few weeks it will be 2020. The D2 that was a good choice back in the early 2000s when this knife was originally produced, is not such a great choice today. Personally, I’d love to see M390 or an equivalent on this $500 piece. I think the price tag commands that. But even a decent stainless like 154CM or S35VN would be preferred here, although at the price point the consumer likely deserves M390 or CPM-20CV. D2 has the added wrinkle of D2 being “semi-stainles” and prone to patina. That’s another reason why springing for the coated version isn’t a terrible idea.

While the D2 blade can assuredly get the job done, I’m not a big fan of D2 on this uber expensive knife. And we live in a day in age where we don’t need such a compromise steel on a knife like this. Benchmade should at least give us another option.

Handle, Ergonomics, and Pocket Clip

The handle is made mostly of black anodized aluminum. There are a couple visible liners that appear to be stainless steel or titanium. Everything is held together with torx bolts. Handle construction is solid. There are no unintentionally sharp edges, and the parts line up perfectly. The handle has a pleasant heft to it, and the entire package reminds me of a meticulously built tiny hard-anodized aluminum coffin. What’s not to like?

The Infidel feels great in hand. I like how the weight meaningfully shifts as you deploy the blade. The open knife is blade heavy, with the balance point back behind the thumb slide. That may have some significance if you are using the knife in more of a martial arts capacity, as if you hold the knife with your thumb behind the button it gives you a neutral feeling in hand. My plebian tasks for the Infidel don’t really take advantage of that balance. I find myself more forward on the handle, bearing down on a block of cheese, angling under the fold of an envelope, or slicing the top off a plastic bag.

Still, the knife feels good in the hand. There are 2 dramatic finger choils that make natural resting spots for your thumb, or they can be grasped securely in a fist. The anodized aluminum has that light texture that reminds me of a chalkboard. The handle itself is generous and is bound to work well for most people. I give the ergonomics high marks.

You know you have acquired a serious piece of hardware when your folding knife comes with it’s own MOLLE equipped pouch. I enjoyed that with the old Benchmade Adamas and I am enjoying it here with the Infidel. There is something satisfying in a “who let the dogs out?” kind of way when you pop open the pouch with your thumb and pluck out the Infidel. Of course a pouch like this could be practical for law enforcement, military, or some other use case where it’s appropriate to wear MOLLE gear. Sadly, I find those occasions are few and far between for me.

Thankfully, Benchmade also equipped the Infidel with a deep carry pocket clip. This is much more practical for a civilian like me. The pocket clip is large, black chrome, and has “THE INFIDEL” emblazoned on it in distressed lettering. Oy vey. It looks cool in the way a Ford Raptor looks cool, gauche and unnecessary. Again, not appropriate for every occasion, but when you can pull off a piece like this it fits the bill.

And the pocket clip itself works great. It’s large, offers excellent spring retention, and buries your pocket knife deeply and securely in the pocket. And I want a secure clip for my $500 pocket knife. The last thing I’d want to do is lose it, or have it clatter out onto the floor when I sit down.

Here is your overexposed pocket clip shot:

That shiny clip is tough to photograph.

Deployment and Lockup

The Infidel is a dual action out the front automatic, meaning you can both open and close the blade with the pull of a button. The button on this knife is a large stepped block of raw aluminum. It stands out from the handle, a stark point of contrast on my otherwise black knife. That’s fine as it is a very functional button. You press forward on it with your thumb to get the knife open. A good amount of travel and force is required, but when you push back hard enough the blade springs forth with a substantial clack.

I think the amount of force and travel required is just right. You don’t want this knife accidentally opening, and the long throw switch makes this a purposeful knife to use. But isn’t so bad that it tears up the pad of your thumb. I can absentmindedly flick this blade open and closed all day, much to the chagrin of my girlfriend or anyone else within earshot.

Here is another size comparison with the Spyderco Delica and Spyderco Endura:

Lockup is pretty darn tight. There is a little wiggle in each direction, but not much. There will almost always be that compromise in an out the front auto, unless you are willing to spring for something like the Deadlock. But those start at $1,000, assuming you can get your hands on one. I’ll review one eventually. But this is about the Infidel, and I’d say the lockup on the Infidel is pretty good for what it is.

Benchmade Infidel Review – Final Thoughts

The Infidel is beautifully made and over the top. While there are practical uses for a knife like this, “normal” knife users like me will mostly enjoy the Infidel for its novelty. I’ve enjoyed putting this knife through its paces around the house, but that’s about all I can do with it. That says more about me than the Infidel, but suspect that my use case represents a lot of the people that buy this knife. And that’s totally OK. I think the Infidel is a satisfying collectible, and it’s resting comfortably next to my Combat Troodon and Halo VI.

If I were to update the piece I’d select some different blade steel. D2 has almost always been considered a compromise steel. That’s inappropriate on a knife that has such an uncompromising price point.

I think there are some compelling use cases for a dual action out the front auto. It’s hard to beat the convenience of a knife like this. It’s true one hand use, and 4″ of blade appears at the touch of a button. It’s practical in that regard. And for some professionals, this is a legitimate tool. It’s not a toy and it’s not a novelty. I’ve enjoyed the Infidel and respect it for what it is.

Again, I’d draw an analogy between the Benchmade Infidel and Ford Raptor. There is a serious “want vs. need” conflict within this knife. Few people that buy the Ford Raptor actually will bomb it down the sand dunes of Baja California. Most will drive it to work, and maybe tow a boat or trailer with it on the weekends. Who knows, they may even play in the mud with it on occasion.

The Infidel offers a similar proposition. Totally cool, capably built, and entirely impractical for most people most of the time. But that’s OK. If you have the means and the interest, the Infidel is well done and worth checking out. And if you are looking to scratch this kind of itch, it’s a hell of a lot cheaper than a Raptor.

Benchmade Infidel – From $437.00
From: BladeHQ

I recommend purchasing the Benchmade Infidel at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade Bailout Review

by Aaron Shapiro 3 Comments

There has been something interesting going on at Benchmade Knife Co. I’ve said it a few times in recent reviews, but it’s worth highlighting here. They used to be the dusty old gun-shop knife brand. That’s not to say the old mini Griptillians were terrible, but just that I don’t think many people would have called them, “exciting.” Some of their newer designs from the last 2-3 years have been on a different level, and the Bailout is no exception.

Buy the Benchmade Bailout at BladeHQ
Buy on Amazon

The Benchmade Bailout is the companion to their also newish released Bugout. Both knives share almost every trait apart from steel, blade shape, and their vaguely prepper-ish names. I like these knives, but I’ve always had an affinity for tantos, so I opted for the Bailout.

Before we get too far into the review, let’s touch on some general specs…

(All Measurements are my personal measurements and may differ from manufacturers specs)

Blade: 3”
OAL: 8”
Thickness: .402” not counting clip .614” with clip
Blade Thickness: .93”
Steel: 3V
Weight: 2.1oz
Lock: Axis Lock

Blade and Steel

Before I get into the review too much, I want to address a potential elephant in the room. At the time of this review, there has just been a little scandal on Instagram regarding the Bailout.

Apparently, an Instagram account had one of these blades Rockwell tested by a friend. The knife came back with a mid 50’s Rockwell when it is advertised at 60 HRC. I have no real perspective on this apart from saying this: A single independent source is not something to base an entire opinion on. If ten knives had been randomly and all found to be lower in HRC than advertised, when tested by a reliable source, I would take a little more heed.

/rantoff let’s get on with it.

The Benchmade Bailout is a tanto shaped blade made out of 3V steel. The blade is then finished with a slick grey Cerakote to protect from corrosion and give it that “high-speed-low-drag,” appeal.

I’ve carried this knife in a lot of scenarios since first purchasing it. It was in my pocket when I built a fence around my house. It’s been in my pocket on river raft days. It’s also been with me whenever I’m doing something that I wouldn’t want to subject a custom knife to. In these contexts, it’s done a lot. I’ve split open Quik-crete bags with it, sharpened pencils, popped ties holding lumber together etc etc… It’s done all of these very well.

I’m not one to compare how something passed through a material or how many consecutive cardboard cuts it can do before failing. I am, however, someone that grabs for their pocket knife frequently and takes notice if it preforms the “real-world task,” the way I needed it to. The Bailout did this well, then stropped back to sharp easily.

The 3V steel that Benchmade has selected is a favorite of mine. I often request it on my custom knife orders. It’s also one of the nicer steels to sharpen, in my experience. 3V will take a fine edge with minimal effort and retain it for a long, long time. That being said, it’s not stainless. 3V has 7.5% Chromium, so it’s “nearly” stainless much like D2.

From what I’ve seen if you keep your knives cleaned and maintained you’ll avoid any staining and pitting. In the specific case of the Bailout, Benchmade has coated the steel, so you’re only really going to see any stain issues on the edges.

Handle, Ergonomics, and Pocket Clip

The Bailout’s handle is made from textured Grivory, a polymer based material. The handle slabs are thin and skeletonized with a consistent matrix of pockets milled out to reduce weight but maintain strength. The slabs themselves are a svelte .12” thick. They feel good in the hand with enough grip that the knife feels secure but not so much that it begins to cause hot spots.

Benchmade has flared the handle out near the pivot to reduce the possibility that you’ll slip onto the blade if you use it for a piercing task. This flaring also acts as a bit of a thumb ramp for me.

Moving to the back, we have an aluminum pommel. I suppose the idea behind this is for some last-ditch striking application. I would love to have seen hardened steel used instead, but I imagine it came down to a weight/strength type scenario.

The clip is excellent. It’s a short (in length) deep carry clip. It tucks right into the palm of your hand when you’re holding the knife and carry nice and deep in the pocket. I would love to see more makers take up the shorter clips instead of making them half the length of the knife itself. That being said, it’s a tight clip, so if you have thicker pockets, you may run into an issue getting it clipped on.

And speaking of pockets, the Bailout carries easily. At just over 2 ounces, this is a knife you will quickly forget you are carrying until you need it. The Bailout isn’t quite as discreet as the Bugout, as it has a has that slotted protruding pommel, but everything is blacked out for a low profile. Here is a picture of it in the pocket:

No complaints in the carry department.

Deployment and Lockup

The Bailout utilizes dual thumb studs and phosphor bronze washers to get the blade open. This is standard fare for Benchmade, and much like their other knives, the blade deploys smoothly and easily.

Ahh, the axis lock. I’ve talked about it before in previous reviews, but suffice to say I’m a fan. I like it when watch companies incorporate mechanisms that are ambidextrous. It opens the doors for left-handed users as well as potentials users that want to carry weak side.

The Axis lock itself is pretty great. It operates by moving a hardened steel bar along the curved tang of the blade until it reaches the open position. Once it does two springs, snap it in place blocking the knife from closing. The bar itself extends across the length of the knife’s handle allowing you to open it from either side, thus ambidextrous. The Axis lock has been historically proven to be a reliable and robust locking method for a good portion of Benchmade’s catalog.

Competitive Offerings

For the sake of argument, let’s look at some competitive options:

We have the Spyderco Para 3 Lightweight, priced around $40 less than the Bailout. Same FRN style handles, somewhat ambidextrous compression lock, but the steel is where you’re making a compromise. The Para 3 uses CTS-BD1N, which is new to me, but it seems like it wouldn’t outperform 3V.

Or we could look at Zero Tolerance 0450. I like this knife, but it costs roughly $40 more than the Bailout, and due to the Titanium construction will weigh significantly more. That’s not necessarily a bad thing, but the Bailout is trying to fill a specific need in a folding knife. I doubt the 0450 would be a knife you’d literally throw in a Bailout (or Bugout) bag due primarily to weight and cost.

Benchmade Bailout Review – Final Thoughts

When I opened this review, I touched on the fact that Benchmade has been creating some incredibly fresh and cool designs that fit a little better into the landscape of 2019’s knife collecting. The Bailout (and it’s Bugout twin sibling) are perfect examples of this. Benchmade has taken tried and true materials and molded them into a configuration that the EDC community values greatly. It’s thin, light, and durable. Benchmade has selected top-tier steel that will take a beating and keep on cutting. On top of all of this, the knife looks cool! The Cerakoted blade with an aggressive tanto tip is primed and ready for some Instagram pocket-dump cred.

The best part, however, is the price: Currently, BladeHQ has the Bailout priced at $144.50. That’s a lot of value for your money in my opinion.

Sale

Benchmade - Bailout 537GY EDC Knife, Tanto Blade with Black Grivory Handle (537GY)

ULTRALIGHT DESIGN: A slim, sleek stealth knife that adds confidence to your kit; Lightweight design for optimal strength-to-weight ratio
CPM-3V STEEL: A powder-metal tool steel engineered for high stress and extreme force; Exceptionally tough with good edge retention; Requires a little extra care to keep the rust off. Factory in Oregon City, Oregon.
6061-T6 ALUMINUM HANDLE: Originally developed as a premium aircraft grade aluminum it offers a solid handle and form at nominal weight.
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Mini tip-up reversible deep-carry pocket clip for ultimate accessibility

Editor: I recommend purchasing the Benchmade Bailout from Amazon or BladeHQ. Thanks for reading.

Benchmade 535 Bugout Review

by Dan Jackson 6 Comments

The Benchmade Bugout is a knife I was interested in reviewing when it first came out. But my original role as the sole author of this website has transitioned to more of a “contributing author and editor” role, and the Bugout was on someone else’s list to review. These days I need to work with the other authors and not step on their toes if they want to review a particular knife. That’s OK. There are plenty of other knives to review.

Buy the Benchmade Bugout at BladeHQ

Buy on Amazon

So I forgot about the Bugout and moved on to other knives.

Fast forward a year or two later. I’m at a friend’s house party. He knows I have this “weird website dedicated to knives” and wanted to introduce me to his friend. As an aside, a handful of my friends know I operate this website, and the majority of them think it’s hilarious that someone could dedicate an entire website to pocket knives. Anyhow, at this party my buddy was excited to introduce me to a friend of his that carried a pocket knife. I showed him the Native 5 in FRN I happened to have in my pocket, and he produced his Benchmade Bugout.

Handling the knife for about 30 seconds was all it took. It has a beautiful thin profile, wonderful tactile handles, is light as a feather, and the bright blue anodized hardware gave the knife an almost jewelry like quality. I could immediately tell it was a knife I wanted to add to my collection. I followed up with one of my writers, who confirmed the Bugout had fallen off his radar, and that I was clear for takeoff to acquire my own Bugout for purposes of today’s review.

General Dimensions and Blade Details

The Bugout has an overall length of 7.46″, a 3.24″ blade, and weighs 1.85 ounces. In some ways it can be considered a largish EDC knife with its over 3″ blade, but on the other hand, it’s so damn slim and light how could you not recommend this for daily carry? It’s only half an ounce heavier than the revered Dragonfly 2, but it packs an extra inch in blade and almost 2 inches of overall length. Incredible really.

As usual, your local laws and preferences in terms of size and blade length will come into play here, but personally the Bugout has been a great choice for daily carry. And I don’t think anyone will kick it out of their pocket for being too heavy.

The Bugout features a long drop point blade. In many ways it reminds me of my Volli, but I suppose the profile is a little closer to the discontinued 707 Sequel. Regardless, it’s a classic looking drop point with a high flat grind and a swedge running half the length of the blade. The knife has been given a combination satin / stonewashed finish that you find on pretty much all of Benchmade’s uncoated knives. The blade shape is classically appealing and the execution is excellent.

Here is a size comparison with the Spyderco Native 5. Another excellent FRN clad USA made EDC knife:

My favorite thing about this blade is how well it cuts. I realize that sounds a little odd as most will agree the purpose of a knife is to cut stuff, but not every pocket knife cuts that well. Sometimes it’s a conscious design decision (ie, a thick “hard use” blade), and sometimes it’s a form over function thing. I’m pleased to report the Bugout cuts well.

Benchmade went with S30V for the blade steel. S30V may turn some folks off as it has a reputation for being an older steel that can be difficult to sharpen, but here it’s a great choice. Benchmade does a tremendous job with their S30V. It’s easy to sharpen and holds a great edge. I have some Spydercos in S30V and the steel is stubborn to sharpen. The Bugout is a lot like the Volli, knife that is a proven slicer and an underrated Benchmade. Like the Volli, the Bugout features thin blade stock that has been thinly ground. The end result is an exceptional slicing knife.

I have used my Bugout extensively and have been polishing the edge up on my newly acquired Spyderco Golden Stone. As I mentioned in my recent Wayfarer 247 review, I have been having a ton of fun with this new sharpening stone. I’m able to take my edges to the next level, and have gotten some truly exceptional results out of the stone on this Bugout.

I will eventually review the Golden Stone, but for now I want to comment that I’ve been getting some scary sharp edges on my knives, and the Bugout has taken to the Golden Stone like a duck to water. I have a mean working edge on this knife. It pops hair, push cuts paper, and zips through cardboard like no one’s business.

The S30V blade takes a wonderful edge and holds it for a long time. I prefer Benchmade’s S30V over their classic 154CM because I find it to be just as easy to sharpen, but has the advantages of more corrosion resistance and better edge retention.

Handle, Ergonomics, and Pocket Clip

The Bugout has a textured high density plastic handle with partial stainless steel liners. The steel liners mainly serve to house the omega springs for the Axis Lock, and the handle construction is similar to a Benchmade Griptilian. Here Benchmade has developed a handle that is super thin, but features a minimal amount of flex.

If this was a 2 sentence review on Amazon, this may be the part where the reviewer bitches about the plastic handle scales. Frankly, I haven’t read any of those reviews, but it’s almost a requirement that if you are going to review the Griptilian you will at some point gripe about the FRN handles. I assume that’s a complaint some may register with the Bugout as well. Personally, this is a lightweight light to medium duty EDC knife, and I have no problem treating it as such. The handles feel high quality to me. The knife lacks the heft of a full liner and G10 scaled knife, but that’s a good thing in my book. Plenty of heavier duty knives out there if that is what you need.

Fit and finish is great on this knife. I have yet to find an issue in the fit & finish department, and the handle is a great place to search for flaws. All the parts line up, everything is nicely finished, the screws are flush, and the blue anodized hardware give the knife just a touch of zazz.

While this is a sub 2 ounce folder, the Bugout has the ergonomics of a full size knife. That’s because it is a full size knife. The handle is simple and there is plenty of it to grab onto. I take an “XL” size glove and have plenty of room for a full 4 finger grip. I think most people will have no problem using the Bugout in a forward or reverse grip.

The simple handle design benefits from a couple small traction features. First you have a short row of mild jimping on the spine of the handle. That works well without tearing up your thumb. In addition to the jimping you have a nice textured FRN handle. Benchmade included a good deal of diamond patterned texturing, but even the naked parts of the handle have a good gritty feel to it. Good traction on this knife.

The pocket clip is another interesting aspect of the Bugout. Benchmade went with a stubby low rider clip. It’s a discreet deep carry pocket clip. This sounds good in theory, but I’m kind of on the fence about it. While on one hand I think it looks super cool, the knife has popped out of my pocket a couple times. The Bugout has always fallen into my pocket, rather than onto the floor, but still this is concerning. Granted, I wear shorts a lot of the time, and I have big fat legs, so I don’t know if you will have the same issues. Regardless, the combination of a long knife and short clip haven’t 100% jived with my style of carry.

This knife will accept a standard Benchmade clip, which Benchmade will probably send for free if you ask nicely or use their Lifesharp service. So if you have issues like me you can always swap out the clip. I will be curious to hear if anyone else has experienced this issue. If so please leave a comment about it below.

Deployment and Lockup

The Bugout makes use of two blue anodized thumb studs to get the blade open. One of my few criticisms of this knife is is that the thumb studs are placed close to the handle in the closed position. It makes it a little hard to get the blade out. Contrast this with a knife like the Griptilian where there is more room, and the blade flies open. However, the thumb studs do work, and if you played around with the design too much you would spoil the lines of the Bugout.

Benchmade went with phosphor bronze washers. This is standard fare for their axis lock knives and should come as no surprise. The action is smooth and fluid. It isn’t as glassy as the G-10 Griptilian, but it’s definitely workable for my purposes.

With a sub 2 ounce plastic handled axis lock knife, you would think there would be some blade play. After all, I’ve experienced that in a lot of earlier Benchmades. It’s just part of the gambit when you buy a FRN clad axis lock knife. Or so I thought. Oddly enough my little Bugout has no blade play at all. It’s as tight as a drum. Really nice to see.

Here is a shot with the significantly more expensive, yet still excellent, 940-1:

The Axis lock itself remains as easy and fun to use as ever. This is a fully ambidextrous knife. There is not much new I can add to this section. The lack of blade play is surprising, as traditionally that is the only compromise I can note in a FRN handled Axis lock knife.

Blade centering is perfect on my knife.

Benchmade 535 Bugout Review – Final Thoughts

I know I’m a little late to my party with the review of the Bugout. The knife has been out for over a year. Old news for those who track the knife industry. But this is a great knife adding to a string of impressive releases for the Benchmade. I can recall just a few years ago when folks thought Benchmade had nothing left to offer. Then they release the G10 Griptilian, 940-1, Anthem, Crooked River, and Proper. All top shelf pieces.

The Bugout is a worthy addition to that long list of excellence. But the Bugout is unique from these other knives (save the Proper) in that it’s priced a little over $100. While that’s still a good amount of money for the average person to plunk down for a pocket knife, I think it’s a fair price for the Bugout and is relatively inexpensive for a Benchmade. You get an attractively built USA made knife that is completely dialed in, and packs all of the function of a full size folder into a sub 2 ounce package. Pretty amazing when you stop to think about it.

My only nits are that the small pocket clip, while attractive, doesn’t work as well for me as a full size clip, and the thumb studs are close to the handle. As a result you need to pay a little more attention when trying to flick open the knife. That’s all I got.

So it should be no surprise that my review echos the near universal acclaim for the Bugout. It is a great piece. While it took me a while to resist the knife when I initially saw it on the internet, the first time I saw one in person it had me in it’s thrall in under 30 seconds.

Sale

Benchmade - Bugout 535 EDC Knife with Blue Grivory Handle (535)

LIGHT AS A FEATHER: And incredibly tough; Ideal for hiking, camping, and backpacking, and made for everyday use; A lightweight, go-anywhere tool.
CPM-S30V STEEL: For first-rate edge retention and corrosion resistance; Precision drop-point construction for strength and versatility. Factory in Oregon City, Oregon.
FULLY AMBIDEXTROUS GRIVORY HANDLE: Has an ergonomic textured grip and is molded from glass-filled nylon for superior durability.
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Reversible clip; Lanyard hole for versatile carry options.

I recommend purchasing the Benchmade Bugout at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade Anthem 781 Review

by Aaron Shapiro 3 Comments

Last Updated: July 18, 2019

There was a time when Benchmade was kinda the sleepy “Gunshop Knife Brand.” There would always be a few dusty Griptillians sitting in the case next to the preowned Glocks, and while the Grips might be fantastic value-props, they a bit vanilla-icecream-y if you get my meaning.

Buy the Benchmade Anthem at BladeHQ

Buy on Amazon

However, something has been changing in the last few years. I don’t know if someone put some sriracha on the break table over there in Oregon City, or what, but something has injected some pep into their design team. Introducing the Anthem 781, Benchmade’s first Integral Titanium folding knife. There are lots to say about this one, but before I get too deep let’s go over some specs:

(Please note these measurements are according to my ruler and calipers, manufacturer’s listed measurements may vary.)

Blade Length: 3.25” of cutting edge, 3.375
Overall Length: 8.125”
Thickness: .585” with clip, .421 handle only
Blade Thickness: .115”
Steel: 20CV
Weight: 3.7oz
Lock: The famed Axis Lock
Country of Origin: USA

Blade Details

With a knife like the Anthem, I believe that it’s intended to be a daily carry type piece. It’s not overly large, doesn’t have any sort of complicated aspect to it, and the functional bits are designed to be, well, functional.

The blade is a great example of this: drop pointed shaped with a rounded (or crowned) spine. Eyeballing it, I’d guess that it’s flat ground but I suppose it could be a shallow hollow grind as well; either way, it’s a great slicer. It came out of the box with a very nice, toothy, utility edge and I didn’t feel the need to change this on my wicked edge. In the couple of weeks that I’ve been carrying it I have had occasion to break down boxes, slice up food, and perform just daily “knife-stuff” tasks with it, nothing crazy, no batoning or zombie apocalypse type stuff, but in terms of daily EDC tasks, it excelled.

In terms of the steel, I will briefly comment on it: Benchmade chose 20CV for this blade, and I believe that to be an excellent choice for a knife like this. 20CV is a high toughness and corrosion resistance steel, that hardens to around 62HRC. I have no means testing to see if my knife is in that range, but I can tell you that it’s performed beautifully and has been easily maintained on a strop. 20CV is very similar to M390 (one of my favorite steels) and I have been really pleased with it in this application.

Handle, Ergonomics, and Pocket Clip

Ah yes… The INTEGRAL handle. This is really what makes this knife stand out, isn’t it? This is the first Integral from Benchmade. For those of you not familiar with the term: Integral means that the handle of this knife is milled out of a single block of Titanium as opposed to two that are screwed together. There aren’t any screws holding the knife handle together. In the past, this level of knife making was reserved to custom makers that had a lot of time on their hands (it takes a while to mill a channel out of a block of Ti) but recently a few companies have started incorporating integrals into their lineup.

One of the interesting things about Benchmade’s execution of the integral handle is how they incorporated the axis lock into it. When you look at the spine of the knife (the money shot of any integral) you’ll see two screws hidden in the decorative milling, these hold the locking method in place.

In the hand the first thing that came to mind for me was how thin the knife is; It carries very well in the pocket and feels great in hand. The handle itself is trim in both dimensions thickness and height, but there is a sort of faux-choil towards the blade that locks the hand in securely when holding the knife open. Otherwise, the milled texture gives you a little bit of grip on what would otherwise be a pretty slick knife.

The pocket clip is an ambidextrous milled Ti clip that is more than a little phallic, but it is also very functional. There are several makers out there that are offering custom clips made from Moku-Ti so if you want something different there are options for you. The knife carries well with approx 1/2” sticking out of the pocket, offering a perfect grip to withdraw it.

Deployment and Lockup

The blade on the Anthem opens by way of ambidextrous thumb studs. The blade deploys easily thanks in part to bearings washers. The action is smooth and easy.

For lockup, the Anthem comes equipped with Benchmade’s Axis lock. I’m not sure there’s much to say about the Axis lock that hasn’t already been said. It’s an incredibly solid lock mechanism that isn’t prone to lock rock, doesn’t really suffer from failures in the way a liner or frame lock might, and it is completely ambidextrous to use. The execution of the Axis lock is worth noting on the Anthem, there’s a block screwed to the spine of the knife that acts as the anchor point for the axis lock mechanism.

Benchmade Anthem Review – Final Thoughts

So to wrap all this up…the Benchmade 781 Anthem is a great step forward for Benchmade knives. I think it shows a focus shift on Benchmade’s part too, hopefully, starting to produce some higher-end knives. I am also very pleased to see their adoption of some different steels. I love CPM154 and S30V, but it’s good to have some variety. Between the 20CV here and the S90 in the 940-1, it’s been refreshing.

Now, the caveat to this entire review: This is an expensive knife. MSRP is around $500, with retail landing closer to $425 on BladeHQ and Amazon. Competitively, this puts you in the ballpark of a Chris Reeve, or above the ballpark of some really nice Zero Tolerances, but what you’re paying for here is the time and difficulty in making the handle. It’s a remarkable feat, but you have to decide if it’s worth it to you, for me it was too cool to pass up. The nice thing, however, is that you won’t be getting a gimmicky integral for that price—you’re going to be putting a knife that will make a great daily carry in your pocket.

COLD STEEL AD-10 3.5" S35VN Steel Ultra-Sharp Drop Point Blade 5.25" G-10 Handle Tactical Folding Knife with Tri-Ad Locking Mechanism

CONSTRUCTION - The AD-10 tactical folding knife features an ultra-wide, ground thin at the edge, honed to razor-sharpness blade that offers unprecedented cutting, shearing, and piercing power while resisting bending, breaking, or chipping
S35VN STEEL BLADE - Crafted from S35VN steel, the AD-10 folding knife's blade ensures super-fine cutting edges and exceptional edge retention; This premium steel is renowned for its durability and ability to maintain sharpness through rigorous use
STRONG HANDLE - The handle of the AD-10 knife boasts heat-treated, full-length aluminum liners and 3D machined G-10 scales, providing unparalleled strength and grip; Its precise contouring and integral finger guard ensure a snug and secure fit in the hand
TRI-AD LOCK - Complete with the Tri-Ad, the AD-10 offers unrivaled strength, shock resistance, and durability; This reliable locking mechanism provides peace of mind, safeguarding your fingers during use and ensuring the blade remains securely in place
SPECS - Weight: 7 oz (198.4 g); Blade Thickness: 3.8 mm; Blade Length: 3 1/2"; Blade Steel: S35VN; Handle Length/Material: 5 1/4" G-10; Overall Length: 8 3/4"; Knife Type: Folder; Blade Shape: Drop Point; Locking Mechanism: Tri-Ad Lock

I recommend purchasing the Benchmade Anthem at BladeHQ or Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade Proxy Review

by Dan Jackson Leave a Comment

Last Updated: September 7, 2019
Warren Osborne is one of the most recognized names in knife making. While he was an extremely talented custom maker, a large part of his renown is due to a series of high profile collaborations with Benchmade. The 940 is one of the most notable collabs, but Warren Osborne is also known for designing the Rift and Barrage, among others.

Buy the Benchmade Proxy at BladeHQ

Buy on Amazon

Warren Osborn passed away in 2016, after a long a long struggle with a cancer. The Benchmade Proxy was his final collaboration with Benchmade. I happen to think it was an interesting design. Benchmade has only recently gotten into flippers, and this Proxy is one of their takes on a titanium framelock flipper. As Warren’s last collaboration with Benchmade I knew it was something I needed to get my hands on.

General Dimensions and Blade Details

The Benchmade Proxy has an overall length of 8.85″, a 3.87″ blade, weighs 4.86 ounces, and is made in the USA. This is a substantial knife. A bit too much for me to carry on a daily basis, but I’m sure it will make a fine EDC for those that like larger knives. At under 5 ounces, it’s plenty light and pocketable for a near 4″ bladed folder.

The Proxy features a long sloping drop point blade. It kind of reminds me of the head of a shark. For whatever that is worth. It’s a strong blade cut from near 4mm thick stock. The knife has a high flat grind and has been left thin behind the edge. It’s fine for cutting boxes or fruit, and I suspect it would hold up under tougher chores as well. The tip is placed low on the knife. That shortens the belly but makes it good at stabbing things. Benchmade went with what appears to be a matte satin finish. It’s a utilitarian finish that hides wear well.

The most prominent feature on the blade is the oversized sharpening choil. That makes it easy to sharpen, but you lose some edge, and if you aren’t careful material you are wanting to cut can get caught up in the large choil.

Benchmade selected CPM-20CV for the Proxy’s blade steel. This is the same steel my G-10 Griptilian came in, and now that I’ve owned that knife for almost 2 years, I have a little experience with it. Manufactured by Crucible Industries, CPM-20CV is advertised as a steel with high corrosion resistance and wear resistance, and good toughness. Chemically it is similar to M390, which is an excellent steel. CPM-20CV has an extremely high chromium content, which results in its corrosion resistant qualities.

In practice I have found that CPM-20CV performs admirably. It exhibits a nice balance of edge retention and sharpenability, while exhibiting excellent rust and corrosion resistance. To be compared with M390 places it in excellent company, and I consider CPM-20CV to be top tier blade steel. A great choice for a high end folding knife.

Handle, Ergonomics, and Pocket Clip

The Benchmade Proxy features a titanium frame lock mated to a one piece G-10 backspacer and handle scale. Everything is held together with torx fasteners. It’s kind of an odd combination between the light brown G-10, the sandblasted titanium, the satin hardware and the mirror polished clip. The varying textures and angular design almost make the Proxy feel like a small piece of modern art. The build quality is excellent. Tolerances are tight, the parts line up, and the 3-D machining on the handles is excellent.

I also like the omission of the lanyard hole. I’m not a big lanyard guy, but you see them on pretty much every knife. It’s refreshing to get something without a lanyard hole. While that is bound to piss some people off, personally I don’t miss it.

The Proxy is a large and comfortable knife. It’s got a big simple handle, so it will conform to most hand sizes. There is little in the way of texture on the knife, but still my fingers fall naturally in place. Warren did design a forward finger choil, and that feature allows you to choke up on the blade and get close to what you are cutting. You can also choke back on this handle, providing you a couple inches of additional reach. Potentially useful if you have to do some light chopping or use the Proxy in a “tactical” application.

The pocket clip is Benchmade’s split arrow clip, buffed up to a high shine. While I generally like the split arrow clip, I’m not a huge fan of the shiny version shown here. It’s kind of loud and it doesn’t match the rest of the knife. It feels out of place, although I’m not sure what I would have put instead of this clip. I probably would have reconsidered the entire hardware selection, finishes, and color choice.

The Proxy carries well considering it’s almost a 9″ folding knife. The sturdy split arrow clip, and bead blasted titanium handle work together to provide good traction without tearing up your pocket. At .5″ thick the Proxy is not the thinnest knife, but it’s not the thickest either. Benchmade milled out some large grooves to make it a little slimmer and more pocketable. All said, I think the Proxy is not a bad knife to carry.

Deployment and Lockup

This is a bearing equipped titanium framelock flipper. I haven’t reviewed a Benchmade framelock flipper before, so this is new territory for me. In practice it flips great. I’d say it scores a solid “7” on my 0-10 scale. Maybe a little behind the action you would find on a Zero Tolerance flipper, but not by much. It’s snappy and responsive action and the bearings are smooth. So smooth you can shake the blade closed. Nice.

The titanium frame lock is reinforced with a stainless steel insert. The insert does not double as an over travel stop mechanism, a feature I’ve come to find standard on most flippers from ZT, Spyderco, and Kizer. That said, the lockup on this knife is early, and free of any sort of play. It’s rock solid.

Here is a shot of the Proxy next to my Strider SnG. I chose the SnG because the Proxy borrows the integral G-10 handle / backspacer.

Blade centering is pretty good on my knife. Not perfect. It favors the G-10 side by a mm or so, but is nowhere near rubbing.

Benchmade Proxy Review – Final Thoughts

The Proxy is a curious knife. Warren Osborne made a name for himself providing unique designs, and I think the Proxy continues that legacy. Individually, there are number of seemingly dissimilar components. Added up they all come together. Sorta. Part of me can’t help but feel that this blade was put together with leftovers from Benchmade’s parts bin, but other parts of me appreciate the simple design. The knife is nicely made and is both comfortable to use and a capable cutter. It’s a great work knife.

While it may not be to everyone’s taste, I think the Proxy is a good knife. I appreciate the Proxy and I appreciate Warren Osborne for his contributions to the knife world. I can safely recommend the Proxy for fans of Warren and fans of this design.

Benchmade - Proxy 928, Plain Drop-Point

HIGH-QUALITY: The CPM-20CV stainless steel blade features excellent edge retention, corrosion resistance, and low maintenance. The G10 and titanium handle offers durability and great performance.
WELL-DESIGNED: The 928 features a highly strong and functional Monolock mechanism with the added convenience of a flipper. It's a manual knife that can be opened and closed with one hand.
ALWAYS READY: The 928 combines high performance and a highly modernized look. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Proxy 928's drop-point, utility blade style and all-around functionality make it ideal for everyday use, outdoor activities, and even tactical applications.

I recommend purchasing the Benchmade Proxy at Amazon or BladeHQ. Thanks for reading.