Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

Zero Tolerance 0470 Review

by Dan Jackson 4 Comments

Reviewing the Zero Tolerance 0470 is about as safe as it gets. We have reviewed countless Sinkevich / Zero Tolerance designs. It is well within our comfort zone of review material.

Buy the ZT 0470 at BladeHQ

No products found.

So why review the 0470? Well, it’s a beautiful knife, it appears to be built differently than the other ZT/Sinkevich collabs I’ve reviewed, and I bought the knife at a fantastic price. I hope no one minds.

General Dimensions and Blade Details

The 0470 has an overall length of 7.8″, a 3.4″ blade, weighs 3.3 ounces, and is made in the USA. Like the recently reviewed 0609 this model is aimed towards the EDC enthusiast. This 0470 is thinner, lighter, and more discreet than the ZTs that got the ball rolling for the company.

I still remember the halcyon days of the 0560 and the 0300. Those models put Zero Tolerance on the map, but those were some big knives. Totally impractical for most people, but they paved the way for blades like this 0470. Personally, I’m glad ZT is continuing to head in this direction. I’m sure they will still release some big knives as well.

Lets talk about the blade. It shares the same low slung lines that make a Sinkevich a Sinkevich. It’s a beautiful triangle of steel with a high flat grind, partial swedge, and two-tone satin and stonewashed finish.

A detail I love on the blade of this knife is how the spine has been subtly chamferred up by the jimping. This is a feature on my Shirogorov F3 and on the Sebenza. To see this detail brought to a ~$250 knife is awesome. That chamferring has also been brought to the flipper tab. It eliminates any sharp edges on the flipper that can cut your finger. Another small touch is the generous sharpening choil. Frankly, a sharpening choil something I would expect to see, but it doesn’t always make it into every pocket knife.

A blade shape like this can do no wrong, unless perhaps you are wanting to skin a buck with it. In that case the tip is probably a little too prominent, but for everything else this is a versatile and functional blade shape.

As a quick aside, here is a size comparison with the ZT 0609. They compare favorably in size, but are built differently:

For blade steel ZT went with CPM-20CV. CPM-20CV is made by Crucible Industries in Solvay, New York. CPM-20CV is chemically similar to M390, a high end European steel I have long appreciated. Crucible has a long track record of making high end specialty knife steel. Their catalog includes 154CM, S30V, S35VN, and S90V. They are specialty steel makers and know what they are doing.

CPM-20CV and M390 have both earned a reputation for high hardness and excellent edge retention, while not being as stubborn to sharpen as something like S90V or ZDP-189. CPM-20CV is also stainless and tough. It’s arguably the best all-round blade steel money can buy as of early 2019.

In practice, the blade of my 0470 has been a excellent performer. The blade came razor sharp. The edge bevel was neat and even, and the stock blade easily popped hairs off my arm. After sanitizing the blade thoroughly (ie, wiping it on my shorts), I put the knife into my daily carry rotation. I used it at home and at work for opening mail, breaking down boxes, and food preparation. I used the 0470 in place of my paring knife for vegetables and fruit.

The blade has performed admirably. It tracks through cardboard and holds up well under harder use, but the geometry is nimble enough to slice apples cleanly, route the tops off of strawberries, and mince garlic. Edge retention has been excellent. When the edge begins to slow I show it to my near mythical Spyderco Golden Stone, and all becomes right in the world again. No issues with the edge chipping or rolling, and no signs of rust, staining, or corrosion either.

Handle, Ergonomics, and Pocket Clip

The handle is where things get interesting. If you peruse our pretty decent catalog of ZT reviews, you will notice there is nothing quite like this 0470 with it’s 3-d machined titanium handles and marble carbon fiber inlay. It’s a level of complexity and workmanship I haven’t seen on any of their other production knives.

That’s what drew me to this knife. If the handle didn’t have this unique twist I probably would have passed on it. The end result is an simple and classy handle. It’s elegant, not ornate. And it has been done beautifully. There is not a stray mark on this knife. And I love the simplicity of the handle construction. There is only one body screw at the tail end.

Inside the titanium handle pieces have been deeply milled out to reduce the weight. Holding it all together is a black aluminum backspacer with an integrated lanyard hole. Again, this integrated lanyard hole is a feature found on my significantly more expensive Shirogorov. Since I’m not a big lanyard guy, I appreciate how they avoided drilling a big ugly hole into the handle of the knife. It’s a level of care you simply don’t see on most pocket knives.

There used to be a nice ZT 0470 disassembly video on YouTube that showed the tight tolerances and attention to detail of this knife. It has since been taken down unfortunately, but the inner workings of the 0470 were surprisingly complex. I would not be quick to disassemble this knife.

The ergonomics of the 0470 are excellent. It’s a simple open design that will accommodate most hand sizes, and the spine of the canted handle meets my palm easily. The balance point is just behind the pivot, making the knife feel light and natural in hand.

Texture has been used strategically on the 0470. A run of fine jimping on the spine of the blade is balanced by coarser jimping on the back of the handle. The handle pieces aren’t heavily textured, but they are deeply contoured to meet your fingers and given an attractive end mill finish. The net result is a positive grip and a knife that isn’t going anywhere. It’s comfortable to hold in forward and reverse grips.

The pocket clip is a simple metal spring clip. No 3-d machining on this model. I’m OK with that. The clip design is simple and effective. It was designed for this knife and follows the lines of the handle. It also lacks any overt branding. It offers good spring retention and is easy to insert and remove from your pocket. The handle is drilled and tapped for ambidextrous tip up carry. It’s not a deep carry clip, but most of the handle is buried.

Here is your in pocket shot:

In practice the 0470 carries well. With a near 3.5″ blade, the 0470 is still on the larger side of a true EDC knife for me. It is substantially bigger than the Dragonfly 2, the most pocketable folding knife of all time.

But I don’t think comparing the 0470 to a DF2 is fair. In defense of the 0470, it isn’t a huge knife, and it has a gentleman’s folder quality to it. It’s just a little over 3 ounces. For its size the knife carries well and the pocket clip does a good job keeping the knife in place.

Deployment and Lockup

The 0470 is a titanium framelock flipper running on caged bearings. The flipper keeps a low profile and heavily jimped. The action is smooth and easy. After disengaging the lock the blade will fall shut with a flick of the wrist.

Here is a size comparison with my Shirogorov F3:

However, the detent on this knife is surprisingly light. The blade doesn’t fall out of the handle, but it’s not the level of snappiness I’m used to. The best way to open this blade is using the light-switch technique. Push buttoning it gives me mixed results. The angle of the flipper tab seems to be designed for light switching.

I find the light detent highly unusual given ZT’s long track record of dialed in detents. I would often comment in my reviews how they are the industry standard in my book. But here the 0470’s detent was surprisingly light, and I don’t think I’m alone either. The knife works fine and with the right technique there are no issues opening the knife, but those expecting the typical action of a ZT flipper will be disappointed. At least initially. Now that I know to lightswitch it I’m able to get the blade open every time, but still this came as a surprise.

For lockup we have a titanium framelock with stainless steel lockbar insert. Thankfully there were no surprises with the lockup on this knife. Perfectly rock solid, with early engagement, and easy to disengage. No sticking, and absolutely no blade play. This is exactly what I would expect from a Zero Tolerance blade.

Blade centering is also perfect on my knife.

Zero Tolerance 0470 Review – Final Thoughts

If you are like me, and think there is no room for another ZT in your collection, then the 0470 might just change your mind. It’s a different knife from this company. Just when I was beginning to lose interest in their offerings they tempted me with this dressed up EDC knife.

I think this constant evolution of their products is what keeps the brand interesting and relevant. They continually step out of their comfort zone, and don’t mind pivoting in different directions. Another example of this is their 2019 0022. It’s the smallest knife they have made, and I just might have to grab one.

But lets get back to the 0470 in particular. I love the classic Sinkevich lines paired with the heavily machined and highly engineered titanium handles. The carbon fiber inlay adds a touch of class. The blade cuts well, the handle is comfortable, the fit and finish is top notch. It’s everything you would expect executed near perfectly.

The only surprise was the light detent. Frankly when I first got this knife I thought something was wrong with it. I was shocked. But now that I’ve had the chance to carry and use the knife for a few months, I have no issues getting the blade open. And my understanding is that this is typical on the 0470. If you own the knife please let me know how the flipper action is for you.

At the end of the day I think the pros far outweigh any cons cons. At ~$250 this is not a cheap knife, but you can see where the money went. I have enjoyed mine and can easily recommend it if the design intrigues you.

No products found.

I recommend purchasing the Zero Tolerance 0470 at Amazon, or BladeHQ. Please consider that by purchasing things through any of the links on this website you support BladeReviews.com, and help produce future reviews. Thank you very much.

Kershaw Launch 4 Review

by Dan Jackson 5 Comments

Regular readers may recall I’m attempting to step outside of my comfort zone and review more automatic knives. I started with a couple high end Microtechs, swung down to the Boker AK-74, and have now changed course towards something resembling the middle ground: The Kershaw Launch 4.

Buy the Kershaw Launch 4 at BladeHQ

The Launch 4 is one knife in a series of Kershaw Launch automatics. The Launch series was released a few years ago. These are simple, USA made knives with clean lines, and aluminum handles that come in a number of colored anodization choices in addition to a more standard matte black offering. The knives in the series appear to hover in that $75-$125 price point. So it’s a premium offering, but won’t break the bank.

I selected the Launch 4 due to it’s unique size and profile. It’s unlike anything else in my collection. Kershaw has plenty of Launch knives with 3-3.5″ blades, and I may check one of those out later on, but there was something about the diminutive Launch 4 that caught my eye.

General Dimensions and Blade Details

The Launch 4 has an overall length of 5.10″, a 1.9″ blade, weighs 1.98 ounces, and is made in the USA. The Launch 4 is a “Cali Legal” automatic with its sub 2″ blade. Cali Legals are an interesting class of automatic knives, that feature blades that are 2″ long or less. This is a category I wouldn’t mind exploring further.

At any rate, this small knife, suitable for daily carry, assuming it’s legal for you to do so. As always, please check your local laws before purchasing an automatic knife. In many places these sorts of knives can be either illegal to own or carry. Be careful.

Here is a size comparison with the Spyderco Dragonfly 2 so you can see how small this knife is:

The spear point blade is stout, and made from blade stock that is just over 3mm thick. Adding to the ruggedness is the partial hollow grind and partial swedge. The end result is a knife with a sharp yet meaty tip. Kershaw offers this knife with both a black DLC coated blade as well as uncoated versions.

Blade steel on this knife is CPM154, a tried and true American blade steel I have grown to both know and love over the years. CPM-154 is easy to sharpen and holds a nice edge. It’s the powder metallurgy version of the classic. The powder metallurgy process results in a finer grained steel, and is an upgrade over standard 154-CM. I have noticed some of my 154CM blades will rust on me if I’m not careful, so I’m kind of glad I got the coated version here. At this price point I’m glad to see CPM-154 stamped on the blade. That’s not a steel I recall seeing Kershaw or ZT work with before. It’s a nice surprise and a great choice for this price point.

In practice I have had the chance to use my Launch 4 as a daily carry utility knife. I bought this knife around Christmas, and like most households we received a lot of packages during that time period. The Launch 4 has gotten a lot of work with cardboard. It cuts cardboard capably. Not the absolute best slicer with its short stout blade, but it gets the job done. It’s not my choice of knife for cutting apples, or for food prep in general, as the blade is too short and the juices end up flowing into the pivot area, but then again this knife probably wasn’t designed for preparing apple slices.

I’m pleased to say the DLC coating has held up really well. DLC is my favorite blade coating because it is so durable. Cardboard is highly abrasive and can mar up the look of a coated blade easily. Here, there are a couple micro scratches on the finish but that’s it. Also, I found the knife easy to sharpen on my [easyazon_link identifier=”B001JL1I6Y” locale=”US” tag=”brdfkdfk-20″]Spyderco Golden Stone[/easyazon_link].

Handle, Ergonomics, and Pocket Clip

The Launch 4 features beautifully machined aluminum handles that have been given a brilliant royal blue hard anodization. This is a two piece handle with an integrated backspacer. I am impressed with the handle of this knife. The design is extremely clean and thoughtful, the engineering is top notch, and I love the contrast with the black hardware and blue handles. The handles have an almost iridescent quality to them, shimmering in the light. However, the ultimate beauty lies in the simplicity of this knife.

That same simplicity carries over to the ergonomics. The coffin shaped handle clocks in at 3.2″. There isn’t much to grab, but the knife still manages to fill the hand and disappears into your palm. You can comfortably hold the knife in both forward and reverse grips. The knife probably does best in a reverse ice-pick grip. In that way it feels very shank like. But you can also hold the knife normally and it will certainly open a letter.

There is no jimping on this knife, or any aggressive texturing. However, the hard anodization has a light texture that provides some nice tactile feedback, and the Launch 4 doesn’t feel slippery. Still, those actively seeking out knives with “traction plans” may want to stock up on skateboard tape, or pick something else to shower with.

The pocket clip dominates the back handle of this knife. It’s a standard Kershaw clip given a black parkerized finish. The handle is drilled and tapped for right side tip up carry only, but you can hardly fault Kershaw for that given the diminutive size of this knife. Really, that’s the only place where you can place a clip and not interfere with the deployment button.

In practice this is a discreet knife. Kershaw has pushed the clip as far back to the pommel as they could without opting for a full on deep carry clip. I think the knife is small enough as it is, and I’m not sure having it completely buried in the pocket is a good idea. That said, if you get the all black version of this knife my guess is that it would be pretty stealthy. Especially if paired with some black leather pants for a black on black on black effect. Just sayin’.

The Launch 4 is easy to carry. Sub 2 ounces and tiny, it’s a little thicker than a Dragonfly 2, but in practice I didn’t notice it much.

Deployment and Lockup

This is a push button auto with a coil spring. It’s just like the Microtech Stitch and Boker AK-74 I have reviewed in the past. A tried and true design that should offer years of trouble free use. The action is stiff and snappy. Not quite Microtech levels, but pretty damn good. You need to pay attention or the knife could fly out of your hand whilst deploying the blade. I haven’t taken this one apart yet, but it appears to be a washerless design where the aluminum frames act as integral washers. That is similar to some of Hogue’s designs.

There is no safety of any kind, but the button requires a good deal of travel to open the blade. Opening the knife accidentally is unlikely, but like any knife you need to treat this tool carefully and with respect.

Lockup is secure and play free thanks to the stout button lock. The one nice thing about reviewing autos is that you do see a lot of button locks with this category. I’ve warmed up to good button lock knives over the years. They aren’t as in vogue as frame locks, but done right they are strong and practical. This Launch 4 is no exception.

For our parting shot, I have selected a size comparison with the Benchmade Bugout. My streak of buying blue knives has continued…

Blade centering is perfect on my knife.

Kershaw Launch 4 Review – Final Thoughts

The Launch 4 is dialed in. The clean design, tight tolerances, and excellent choice of materials give the knife a premium feel.

In an age where you can spend a lot of money on exotic materials and design flourishes, there is something refreshing about buying a knife that strikes that perfect balance of form and function. Kershaw didn’t go super cheap, and they didn’t gild the lily either. They managed to find that sweet spot and allocated their budget to good blade steel, tight tolerances, and durable finishes. The end result is a rock solid small format auto for well under $100.

If you are looking for a premium Cali legal auto, then I think the Launch 4 is an excellent option. It’s reliable and durable. I can see why this is a popular choice.

Kershaw Launch 4 – From $79.95
From: BladeHQ

I recommend purchasing the Kershaw Launch 4 at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Golden Eye Review

by Dan Jackson 8 Comments

One visitor to the site commented that we are “a little biased towards Spyderco”. It’s probably because we have reviewed a lot of Spyderco knives over the years. More than any other brand. I like Spydercos and so does Ben, Grayson, Josh, and pretty much everyone who has written for the site. We all like their knives and consequently Spyderco has gotten a ton of air time over the years. If reviewing Spyderco knives is wrong, then I don’t want to be right.

Buy the Cold Steel Golden Eye at BladeHQ

[easyazon_cta align=”center” identifier=”B019RSXKXO” key=”tall-orange” locale=”US” tag=”brdfkdfk-20″]

Perhaps more controversial is my attraction to Cold Steel Knives. I have reviewed a bunch of them over the years. I’m a big fan, although most of them are too big and impractical for me to truly carry and use. I think I may have a fetish because none of the other authors appear to share the desire to review C.S. stuff. Ben reviewed the Large Espada and the Pro-Lite, so I suspect he may also have a little Lynn Thompson in him, and Chad reviewed the Kudu, but that’s it.

Me? I’ve reviewed 15 Cold Steel knives. 16 if you include this Golden Eye. Yeah… that’s an addiction. I blame it mostly on their excellent marketing videos. Also Cold Steel keeps coming out with stuff I want to review. Andrew Demko keeps turning out hits, and I keep buying them. The Golden Eye is no exception. It looked cool, and slightly different from the other Cold Steel knives with it’s golden thumb hole. Had to have it. Sorry (not sorry).

General Dimensions and Blade Details

For some reason I thought the Golden Eye would be smaller. Maybe that’s because Tony wrote a quick review on it a few years back, and he typically picks out smaller more practical knives. Who knows. This is not a small knife. It has an overall length of 8.375″, a 3.5″ blade, and weighs 4.3 ounces. It’s made in Taiwan like most of Cold Steel’s other folders.

This is a bigger knife. The handle in particular is pretty large, but that’s OK as we will soon learn it is comfortable. That said, it feels light for its size and will make a great work knife. Not a great urban EDC option.

The blade is a big beautiful drop point. The overall profile reminds me of the Terzoula Slipit with its angled thumb ramp extending into a swedged drop point blade. It’s the kind of no-nonsense blade shape that will serve you well in virtually any task. The blade is ground thin with a deep hollow grind, has been given a two-tone satin finish, and is finished with a neat and evenly applied edge.

Cold Steel selected S35VN for this knife. These days the vast majority of their premium folders come in S35VN, replacing CTS-XHP, which replaced AUS-8. S35VN should need little introduction at this point. It is an American made steel designed as a follow up to S30V. It is specifically formulated for knife steels and is great stuff. It takes a good edge, has good edge retention, doesn’t rust or stain easily, finishes nicely, is reasonably tough, yet is easy to sharpen. It’s an excellent blade steel.

And the S35VN really sings on the Golden Eye. I was borderline shocked with how well this knife performed. It slices cardboard with aplomb. It absolutely zips through the stuff. No issues with rope. Great for slicing fruit and other work in the kitchen as well. This is a sturdy knife but it’s ground to slice and has performed phenomenally well in my use and testing.

I’ve been touching up the Golden Eye on my [easyazon_link identifier=”B001JL1I6Y” locale=”US” tag=”brdfkdfk-20″]Spyderco Golden Stone[/easyazon_link], and the edge stays freaky sharp that way. Must be all the gold. No complaints with the blade or blade steel on this knife.

Handle, Ergonomics, and Pocket Clip

The Golden Eye uses Cold Steel’s tried n’ true method of thick linerless G-10 handle scales. I’ve reviewed many of their knives with similar construction, and this knife works just as well as the others. The G-10 is thick and sturdy. There is very little flex when you try to squeeze the handle slabs together.

Fit and finish on the handle is excellent. Everything has been neatly finished. The parts are all flush and the handle screws together so the knife can be taken apart and maintained. The choice of forest green for the handles is a nice touch. It’s a little different without being too far out there, and contrasts with the gold hardware.

I wasn’t sure how the ergonomics would be on the Golden Eye. I guess that’s true for every knife I order, but the Golden Eye in particular had me guessing thanks to the multiple finger scallops. Complicated finger grooves can be a mistake if they force your hand into an awkward position. Here the groves are generous. They feel comfortable and work well for me. I think that most people will find this knife comfortable to use, but I haven’t taken a poll on this. Let me know in the comments section if you have this knife but don’t like the way it feels in hand. Personally, I’m a fan.

In addition to the finger grooves you have peel ply G10 for grip, and some light jimping along the back of the handle. These features provide a good amount of texture without going over the top. Overall I find this to be a comfortable knife to hold in forward and reverse grips. I’ve used this knife extensively and find it to be comfortable to cut with.

The Golden Eye comes with a large gold colored pocket clip and is configured for ambidextrous tip up carry. The clip appears to be designed for strength. You have milled recesses in the handle for the clip along with 3 screws. Spring strength is excellent and the knife is kept firmly in place.

In the pocket the Golden Eye carries well for what it is. It’s a bigger knife, so I tend to notice it, but it’s also a thin handled knife and it’s relatively light for its size. Not a boat anchor, but not a feather either. The strong clip keeps the knife firmly in place. All said I think the Golden Eye behaves nicely in the pocket for a larger knife.

Deployment and Lockup

This knife uses a stepped thumb hole to get the blade open. Cold Steel calls this the “Hollow Thumb Ramp” (HTR), and that acronym is pretty accurate. In practice the HTR works well and is a cool idea. It’s kind of a hybrid between a thumb hole and thumb stud. There is a lot for your thumb to grab onto, and this knife can be opened with gloves as well. The serrated thumb hole is held in place with a set screw, which is kind of interesting. It’s a nice design and one I wouldn’t mind seeing on more knives.

It’s worth noting that the gold plating on the thumb hole has worn off. I bought this knife off BladeForums in “Like New” condition, and it clearly was not like new. Disappointing, but given the price I paid and the fact I was going to use this knife I ultimately decided to keep it. However, the pictures you see here demonstrate that the gold finish is subject to wear.

The action of this knife is smooth thanks to a large pivot and phosphor bronze washers. Like most Cold Steel Tri-Ad lock knives, a good amount of force is required to open and shut the blade. This isn’t a blade you will be able to flick open. But you will find the action to be smooth and reliable, and that’s what I would expect from a rugged utility knife like this.

For lockup we have the aforementioned Tri-Ad lock. I’ve reviewed a dozen or so knives featuring this knife of lock, so forgive me if this sounds a little repetitive, but the Tri-Ad lock is a lock back reinforced with a stop pin. It’s an extremely strong lock design. The Tri-ad lock on the Golden Eye knife is no exception. You can’t muscle blade play out of this even if you try to move the blade out at the tip.

Here is a size comparison with another workhorse in my collection, the Buck Marksman. Still rocking the Marksman:

Disengaging the lock requires a good amount of force, but it’s not as bad as something like the 4-Max. Actually, I find the amount of effort it takes to open and close this knife to be reasonable. That said, this knife has been used quite a bit. Out of the box these can be stiff to open and close, so you may need to break your knife in.

Blade centering is perfect on my knife.

Cold Steel Golden Eye Review – Final Thoughts

Cold Steel has done it again. This is a strong and practical utility knife. It handles well, cuts like a beast, and features the strongest lock on the market. The “Golden Eye” (Hollow Thumb Ramp) works great. The HTR combined with the unique profile, gold hardware, and green handles help distinguish this knife in Cold Steel’s lineup. With so many great Demko designs on Cold Steel’s roster you would think that they cannibalize each other. The Golden Eye is a unique knife, even if it follows Cold Steel’s formula in many ways.

Where the knife may fall short is that this is another large folding knife from Cold Steel. It’s a great performer if you can carry and use this knife, but this isn’t a knife I can pull out at the office or the grocery store. It’s just too big. If I worked on a ranch or something this would be a great choice, but as a mild-mannered couch commando I usually carry a smaller knife. Also, the finger scallops in the handle won’t work for everyone.

That said, I found this to be an impressive knife. Especially the way it cuts. It’s a joy to cut things with this knife. Andrew Demko knows what he is doing and Cold Steel has a track record of executing his designs to brilliant standards. The Golden Eye is no different. Well worth seeking out if you like the design or are an unabashed Cold Steel fan like me.

[easyazon_infoblock align=”center” identifier=”B019RSXKXO” locale=”US” tag=”brdfkdfk-20″]

If you are thinking of buying Cold Steel Golden Eye, please consider purchasing it at [easyazon_link identifier=”B019RSXKXO” locale=”US” tag=”brdfkdfk-20″]Amazon[/easyazon_link] or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com and help produce future reviews. Thank you very much.

Reate Kirby Lambert Crossroads Review

by Dan Jackson 2 Comments

I saw this knife on the cover of Blade Magazine and had to have it. That’s the short version at least, but the story goes back way further than that.

Buy the Reate Crossroads at BladeHQ

I’ve been a fan of Kirby Lambert’s work for years. He was one of those makers that captivated me with his crisp lines and clean work. The knives seemed to belie human intervention. I also remember when Andrew got a Kirby Lambert Wharn. It was late 2012 I think. It actually inspired me to get on Kirby’s books to try and order a Snap. I was on his books, but must have fallen out of line as I never got the follow up email when it was my turn. But that’s OK, a custom Kirby Lambert knife is an object I enjoy lusting over more than actually owning.

But when I saw the Reate Crossroads on the cover of that magazine, and realized it was a collaboration with Reate that could be had at production level prices. Well, its like I said… I had to have it.

And Reate making a knife I “had to have” is kind of interesting. Reate hasn’t gotten much love here. Beyond the Todd Begg Steelcraft Bodega, we haven’t featured a single Reate knife. That isn’t for lack of wanting. It’s more a lack of direction. Their stuff looks great, but their product line seems so deep and expensive that it’s hard to figure out where to begin. If you had to buy one Reate knife, which knife would be “the” Reate to buy? There is no easy decision, but feel free to make a suggestion in the comments. I think it’s the paradox of choice.

In contrast, the Crossroads was a no brainer. That makes it a smart move for Reate. If they can impress the consumer with their collaborations, people will be more likely to try out their OEMs.

General Dimensions and Blade Details

The Crossroads has an overall length of 8.375″, a 3.625″ blade, weighs 5.31 ounces, and is made in China. This is a hefty knife, with a lot of the weight focused around the pivot, so I can’t sit here and say this knife has been a strong daily carry for me. It’s more of a collectible. The knife looks like a pristine custom piece with its two tone blade, custom hardware, and marble carbon fiber hand scales. I’m having time using it hard. But for some this will make a great EDC piece. Others I suspect will baby the knife and keep it more as a collectible. I fall into the latter category.

Here is a size comparison with a workhorse from my collection, the Spyderco Paramilitary 2:

The blade is either a drop point, or a reverse tanto. Hard for me to tell. Or care, if I’m being completely honest. At any rate, there is a blade, and it’s a beautiful blade with a two tone satin finish. The blade has been given a deep hollow grind, and there is a long angled swedge riding most of the blade length. The end result is a functional blade shape with sloping belly, and needle fine tip. But it’s also a unique and somewhat unusual blade shape with what appears to be a broad sweeping shoulder, or a bull neck of steel that meets the top of the bolster.

One odd complaint is that although there is a large sharpening choil, the blade is not sharp all the way down at the heel. There is maybe a quarter inch of unsharpened blade. Hopefully my knife is an exception, but this is an odd omission on a knife that appears to have otherwise been lavished with attention.

Reate chose M390 stainless steel for the blade material. Readers of my various reviews of high end knives will know and love M390 for it’s ability to hold a keen edge, to be relatively easy to sharpen, and resist rust and corrosion. It also takes a nice finish as shown by this beautiful blade.

Despite the heel of my blade being unsharpened, the Crossroads otherwise came exceptionally sharp out of the pouch. Blade stock is relatively thick, but the knife still slices cleanly thanks to that deep dish grind. Can’t say I’ve run this knife hard, but my light duty has shown that the Crossroads is a capable cutter.

Handle, Ergonomics, and Pocket Clip

The Crossroads is a bolstered knife, with your choice of handle scale material over titanium. The bolstered look is a Kirby Lambert signature, and it has been executed beautifully on this knife. You can barely feel the seam as you run your finger over the transition between the handle scale and titanium bolster, at least with this marble carbon fibered version. The hardware is all anodized titanium. The pivot in particular is a striking dual anodized affair. A floating titanium backspacer and lanyard pin rounds things out.

All said this is a beautifully rendered handle and it captures the essence of what makes Kirby’s work so special: his unique aesthetic coupled with an eerie level of fit and finish. There are superb details on this knife and the materials are all top notch. Check out that marble carbon fiber. You can get lost in this stuff:

By and large the Crossroads is a comfortable knife. First of all, the handle is generous and will accommodate most people. The finger choils are large and allow for plenty of room. Sometimes finger choils can constrict the user, but I didn’t find that to be an issue here. There is no jimping, yet the broad spine of the blade provides plenty of room for the thumb.

But I also found that my thumb caught on the tang of the blade. I’m talking about where the spine of the knife meets the stop pin. It’s shaped like a hook, and I wonder if something could have been done to ease that edge. One commandment of knife design is that the only sharp edge should be found on the blade, and in a way this knife violates that cardinal rule.

The Crossroads utilizes a titanium sculpted pocket clip. Some people won’t like this, but I think the titanium clip works great, and compliments the aesthetics of this knife perfectly. The clip has good spring action, and it does a decent job of holding the knife in your pocket. The smooth titanium and smooth marble carbon fiber won’t give you the pocket shredding traction of a Cold Steel or Emerson folder, but I suspect it will get the job done for most people, especially given the dressy nature of the knife.

The Crossroads is a big and bulky knife. There is no way around that, and you will feel the Crossroads in your pocket> Plus, the nature of the the bolstered design puts a lot of weight towards the pivot, so you will get some “pendulum” action if you aren’t careful. Not the best knife for daily carry, but if every knife was as practical as my Native 5 lightweight I wouldn’t have a whole lot to write about.

Deployment and Lockup

The Crossroads is a flipper with a multi-row ceramic bearing system. This is my first multi-row bearing system (MRBS) knife, and part of me is tempted to take it apart to see what that looks like (and show you). The other part of me doesn’t want to dick up the anodized titanium hardware. Been there, done that with my Fantoni CUT Flipper. I still regret the day I tried to take that knife apart and stripped the screws.

Here is a shot of the Crossroads next to my Olamic Wayfarer 247:

I searched online for a picture of the internals of the Crossroads and couldn’t find anything. For now we will all have to use our imaginations and figure that inside there is some sort of MRBS. It appears to be a caged bearing system as I peek into the knife. And I’d believe it given the glassy smoothness to this knife. The blade falls shut easily.

The detent is also ceramic with a crisp and punchy action. There is a detent ramp that adds to the fluidity of the action like the Wayfarer 247, but it still feels different from the 247. The action of the Reate is still sharper and hydraulic. The jimped flipper tab is also sharper, easily grabbing the pad of your index finger. I’d rate the action as a strong “9” on a 0-10 scale. It’s good. Damn good.

For lockup we have a bolster lock. Really, it’s a titanium framelock, but the marble carbon fiber overlay distinguishes this knife slightly from your typical full titanium framelock. Something different.

Lockup is bank vault tight. No play in any direction. The lock is easy to disengage thanks to a small chamfer on the inside of the lock bar. One thing I will note is that the edge of the carbon fiber, where it meets the lock, comes to a sharp point at the peak of the finger choil. I don’t think there is much they could have done beyond changing the design of the knife, but it’s there.

Blade centering is perfect on my piece. As I would expect on a knife like this.

Reate Crossroads Review – Final Thoughts

The Reate Crossroads is a beautiful piece. As someone who has pined for a Kirby Lambert custom for the better part of a decade, the Crossroads had the potential to let me down given the hype and anticipation of owning a Lambert for so long. But I’m pleased to say the knife doesn’t disappoint. It’s a beautiful piece featuring top shelf materials, next level fit and finish, and a dynamic design from Kirby.

But it’s not perfect. In some ways it is finished so crisply it’s uncomfortable. There are a couple sharp edges, namely on the back of the blade where the tang meets the stop pin, and where the carbon fiber bolster meets the lock bar. The knife doesn’t carry that well thanks to all the weight at the pivot. Also the heel of the edge is unsharpened. That may just be an issue with my particular knife.

In a perfect world I’d like to see those issues addressed somehow, but I still see these as relatively minor complaints given the overall splendor of the Crossroads. More of a collectable than an a user, but it’s as close as I’ll probably ever come to owning a custom Kirby Lambert.

Reate Crossroads – From $355.00
From: BladeHQ

I recommend purchasing the Reate Crossroads at BladeHQ or GPKnives. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Native 5 Lightweight Review

by Dan Jackson 27 Comments

Last updated: January 24, 2019
The Native has been a staple in Spyderco’s catalog since 1997. Back when I first got into pocket knives it struck me as a potentially excellent knife. It has great specs on paper. Lightweight, high quality blade steel (at a time when that wasn’t a given), a good useful size to get things done, and a surprisingly affordable price point. This knife sold for close to $50. But the previous generation Native also had a saber grind, toothy jimping, and pinned construction. A number of flaws that kept me from giving the knife my full endorsement.

Buy the Spyderco Native at BladeHQ

Buy on Amazon

Of course Spyderco being Spyderco, they haven’t rested on their laurels. Their most classic designs get updated and tweaked over the years, and the Native was no exception. The Native 5 is their latest in the series. Introduced in 2012, this 5th generation in the series benefits from a number of upgrades. They have also rolled the Native pattern out in a number of variations, including the covetable carbon fiber version Aaron reviewed.

This plastic handled version, dubbed the “lightweight”, is their simplest Native. But I happen to think it may be their best version of the Native yet. Let’s dive in to see what this Native 5 Lightweight is all about.

General Dimensions and Blade Details

The Spyderco Native has an overall length of 6.875″, a 3″ blade, a weight of 2.45 ounces, and is made in the USA. I happen to think this is a great knife for suburban daily carry. It’s a full size knife, but at less than 2.5 ounces you hardly notice it in the pocket. While the Dragonfly II gets the job done, the Native 5 gives you more options.

Speaking of the Dragonfly II, here is a size comparison:

These days the Native comes in a fully flat ground leaf shaped blade. The old deep hollow grind and swedge has been updated with something a little more modern and clean looking. It’s the kind of simple and elegant blade shape that works well for everything from carving up a block of cheese to breaking down boxes to preparing wood shavings for a bonfire.

Spyderco has released this knife in many different blade steels over the years. Mine happens to come in S35VN, which I believe is a fairly common offering for the Native 5. They offer these in everything from S30V to exotic steels including S110V and even Maxamet.

I like the S35VN version of the knife, as S35VN is so easy to maintain. It takes a nice edge and is easy to sharpen, while also exhibiting decent toughness and corrosion resistance. No steel is perfect, but S35VN is pretty damn good by most metrics.

In practice my knife has done everything I’ve asked it to. It is an excellent slicer. It can thinly slice fruit, zip through cardboard, and handles heavier duty chores as well. I’ve been maintaining the edge on my Spyderco Sharpmaker, and the knife stays razor sharp that way. This is a great “do everything” blade that will handle all the stuff you would expect a good EDC knife to handle. I have carried and used this knife extensively. It just works.

Handle, Ergonomics and Pocket Clip

The handle of the native is comprised of two injection molded linerless Fiberglass Reinforced Nylon (FRN) handle pieces mated to a steel lock back and FRN backspacer. Everything is finished well and is secure. The old version of the Native had pinned construction, but this Native 5 comes with screw together construction. So you can take the knife apart if you would like to clean it. All said this handle is simple and utilitarian.

The handle of the Native 5 is big and boxy, providing you with a comfortable handle that fills the hand. There is a nice forward finger choil that is welcome on a good Spyderco. There is no lack of grip either. Between the bidirectional texturing, and the heavily jimped thumb ramp you are going to be hard pressed to find fault with the traction on this knife.

But personally I’ve never been that obsessive about traction. What I enjoy most about the ergonomics of the Native 5 is that none of the ergonomic features get in the way. Instead, everything has been applied with a deft hand. Subtly is the name of the game here, and the whole is the greater than the sum of its parts.

Once again, it’s kind of hard to explain what makes this handle so good, but at the end of the day it just works. This is a knife you will want to hold and use.

Lets turn to the pocket clip. This too has been worked over the years. What Spyderco has done is provided a secure spoon style clip with a unique 3 screw configuration. The base of the pocket clip straddles either the lanyard hole or the pivot, depending on whether you have the pocket clip placed for tip up or tip down carry. This is a “4 corners” clip, so you can configure the knife to carry tip up or down for left or right handed carry.

In practice this knife carries phenomenally. It’s a sub 2.5 ounce folder. You forget it’s there. While the pocket clip is not a deep carry clip, it’s still discreet, burying the majority of the handle. It also a secure clip with excellent spring retention. Not once has this knife fallen out of my pocket.

Lock and Deployment

For deployment we have the Spyderco thumb hole. No surprises there. What’s potentially surprising is this knife has no bearings or washers inside it. It’s all FRN. That would be a turn off for me, but honestly I didn’t know the knife didn’t have washers until I took it apart. It was smooth and I figured it had phosphor bronze washers or something in there. It doesn’t, but that’s OK because it doesn’t need them.

Here is a shot of the disassembled knife so you can see what I’m talking about:

The Native 5 comes with an adjustable pivot, a big upgrade over the old version of the knife that was pinned together. This is a bushing pivot. It works great, and the blade is perfectly centered.

Here is a size comparison with the Sage 1:

For lockup we have a lock back. It’s got a crisp snappy action that is satisfying to use. And there is no blade play in this knife. That is surprising when you consider it’s a plastic handle with no liners at all. Yet it’s a robust knife. Would I baton with it? No. Would I jab it into a tree and use it as a step ladder? No. But it has held up great after normal extended use.

Here is a parting shot with the Native 5 next to my Paramilitary 2:

Spyderco Native 5 Lightweight Review – Final Thoughts

The Native 5 is one of my favorite EDC knives. I even like it more than the Sage 1. Here’s why: it’s lighter than the Sage, has better pocket clip retention, I prefer the S35VN blade, and I think it’s a little more comfortable with the big plastic handles. The Native 5 has found it’s way into my permanent EDC rotation. It’s just an excellent knife and you don’t need to think very hard about carrying it. The blade is versatile and cuts well. The handle is comfortable. The pocket clip is great and the knife is so light you forget you are carrying it.

Spyderco offers this knife in a G-10 version with liners. Why you would pick that knife over this lightweight FRN version is beyond me. The G-10 version weighs over an ounce more. I’m sure it’s a great knife, but I don’t need to look any further than the FRN version. Maybe you have some harder use in mind for your pocket knife. But for most people I think they will find the Lightweight version to be plenty stout and rugged. This is a workhorse of a knife, and it’s great choice if you primarily use your knife to cut things.

The Native 5 Lightweight has my highest endorsement. This is an exceptional EDC knife. Buy it and enjoy it.

Spyderco Native 5 Lightweight Signature Knife with 2.95" CPM S30V Steel Blade and Black FRN Handle - PlainEdge - C41PBK5

An Improved Classic: The Native model has been a mainstay of Spyderco's product line for years as a result of it's Superior Quality and affordability. The state of the art Native 5 is available in an array of handle choices and colors.
USA Made: Spyderco takes tremendous pride in every knife we make, but the ones crafted in our Golden, Colorado factory are special because we invest a piece of ourselves in every USA-Made knife we create.
Light and Durable: This Native 5 handle is fabricated with Fiberglass Reinforced Nylon. FRN is a polymer mixed with glass fiber that is injection molded and formed into a sleek textured handle, creating a lightweight yet high-strength knife handle.
Dependable: If you are looking for control and precision, look no more. This knife features our PlainEdge grind which is known for creating a smooth and exact cut.
High-Strength Lock: The Back Lock mechanism is known for it's high-strength and ease of use. The locking system is positioned on the back of the handle.

If you are thinking of buying Spyderco Native, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Steel Will Cutjack Mini Review

by Dan Jackson 4 Comments

When you look over the the stuff I reviewed last year, it’s a lot of high end pieces. With all that titanium and carbon fiber, you would think I’ve lost touch with the budget knives. In fact, when Travis wrote in his review of the Hogue OTF that the knife was expensive, a commenter said that it’s “Weird BladeReviews would call a $229 knife expensive!”

Buy the Steel Will Cutjack at BladeHQ

Buy on Amazon

In a way that comment warms my heart, because this is a true enthusiast’s site and we have dived deep into all sorts of high end knives here. I’ve personally purchased and reviewed so many expensive knives that a $229 knife amounts to a rounding error. I probably have $229 in knives lost in my couch cushions. One time I wiped my ass with a $229 knife. Not really, but you get the point. I have a problem. That’s part of the reason why I use a penknife name.

But in another way, it shows I may have been focusing a little too much on the higher end of the hobby. $229 is an expensive knife for a lot of people, including myself, and the hobby isn’t only about buying expensive knives. At the end of the day I use a lot of my knives, and the knives I tend to keep are users. The pocket frosting is what typically gets sold off.

I’m still interested in budget pieces, but I pick them carefully. Rather than review every single Chinese made Kershaw that comes out, I’d rather review stuff that interests me. Not all the budget stuff interests me.

But sometimes you can find cool knives for not a lot of money. The Steel Will Cutjack is one such candidate. When Steel Will came onto the scene a few years ago I wasn’t that interested. Most of their knives were plastic handled fixed blades, and I wasn’t that excited.

I believe their first folder was the Gekko. A sleek Italian made piece retailing for around $150. Nice knife, but I wasn’t ready to pay $150 for it.

I sort of lost sight of the brand at that point, but Steel Will continued to blaze forward with new designs and at different price points. Their stuff earned a following and the Cutjack kept popping up again and again. It slowly crystalized in my subconscious until it eventually found itself at my door step. Ok, maybe an Amazon shopping list and credit card were involved, but for $40 I didn’t think too hard about it. This is BladeReviews after all.

General Dimensions and Blade Details

The Cutjack has an overall length of 7″, a 3″ blade, and weighs 3.01 ounces. The knife is made in China, although it’s interesting to note I don’t see “China” anywhere on this knife or in the packaging. The Cutjack is firmly marketed as an EDC knife and is part of Steel Will’s “Urban” series. Originally when I wrote this review I though I had the regular Cutjack, but turns out this is the mini version. It’s a good size for EDC. Lightweight and easy to pocket. If you want something bigger, Steel Will offers a full size Cutjack with a 3.5″ blade and overall length of 8″.

The Cutjack’s blade is a riff on the modern drop point. The swooping belly compliments the curvy backside of the handle. There is a long lean swedge that runs the entire length of the blade. A high flat grind and satin finish lend a smart look to the knife. One thing to note is the edge on my knife is almost perfectly even. For a $40 folder I’m impressed, as it’s tough to find a perfectly even edge on any production knife.

Steel Will selected D2 steel for the blade. An interesting choice, as D2 has a reputation for being semi-stainless and a bit of a bear to maintain, unless you by a knife made by Bob Dozier. But this isn’t a Bob Dozier knife. When I think “D2” I think of the Benchmade 710. Great knife, but a bitch to sharpen. For this reason I wasn’t sure about a budget knife in D2 steel. At least it would give me something new to write about. Writing countless reviews of knives in Aus8 and 8Cr13MoV has worn a permanent groove in my brain. But D2 in a budget blade. That’s something different.

Here is a size comparison with the Benchmade Bugout. Buying lots of blue knives lately…

So I put the Cutjack through its paces. I’m writing this review after the holidays, so this knife has gone through an impressive quantity of cardboard. I’ve used it quite a bit in the kitchen as well. Cutting fruit and cheeses in place of a paring knife. I’ve had a chance to sharpen it on my Spyderco Sharpmaker a few times to maintain the edge. The D2 blade has held up great. No staining at all, easy to sharpen, and it has held a good edge. Hard to believe it’s actually D2 with performance like that, but I’m not complaining.

Handle, Ergonomics and Pocket Clip

The Cutjack’s handle is FRN scales over stainless steel liners with a high density plastic backspacer. This is similar to what you would find on a Delica. In practice the FRN plastic handle scale isn’t quite as heavy as what you find on a Japanese Spyderco, but it’s pretty nice. In fact the handle is surprisingly nice and well constructed. All the parts line up, the steel liners have been skeletonized, and there is custom hardware for the body screws and pivot. For $40 this is great.

I will say that the inside edges of the handle are all a little sharp. Some ultra fine sandpaper would take care of that. Beyond those sharp edges, there is little to grouse about when it comes to the Cutjack’s handle construction.

How does it feel in hand? Well, some of the inside edges are a little sharp as I’ve mentioned, but on the all the handle is comfortable. Plenty of room for a 4 finger grip, whether you are choking up on the forward finger choil, or laying back in the cut. As far as traction is concerned, there is no lack of texture on this knife. The thumb ramp is finely jimped, the backspacer is a big toothy geared affair, and the handle scales themselves have a pleasant woven texture to them. Not as grippy as Spyderco’s bi-directional texturing, but it gets the job done.

In practice the Cutjack feels good in hand and I’ve had no issues breaking down boxes, slicing fruit, and doing some light carving to get a campfire going in my back yard.

The pocket clip is a silver spoon style clip. It buries the knife deeply, but isn’t a low rider clip. All in all I think it’s a good clip. It has good retention, keeps the knife tucked away, and the handle is drilled and tapped for ambidextrous tip up carry.

The Cutjack carries well. It’s neither ultra thin nor ultra light, but it is passably thin and passably light. It’s the kind of knife that I quickly forget I’m carrying until the anointed time arrives and I need to produce a pocket knife. The Cutjack earns strong marks for its practical carry clip and easy pocktability.

Deployment and Lockup

When I look at my list of best budget EDC knives, I notice only the Kershaw Skyline is a flipper. And the Skyline isn’t a great flipper when we think about modern flipping knives. It was designed before the renaissance in flipper folders.

The only knife that comes to mind as a great sub $40 flipper is the excellent CRKT Swindle. Could the Cutjack join the ranks? I think it’s possible. However, the flipping action of the Cutjack isn’t as good as the Swindle. The Cutjack uses phosphor bronze washers rather than bearings, and the detent isn’t as crisp on the Cutjack. But it’s still pretty good. I’d put the action around a “5” on the 0-10 scale. It’s not bad, but it’s not going to come close to the feel of a Zero Tolerance flipper or even the Swindle.

For lockup we have a stainless steel liner lock. Lockup is pretty good. I have a little side to side wiggle. Nothing crazy, but it’s there. I tried tightening the pivot, which removed the blade play but made the blade impossible to flip open. No up and down play at least. Lockup is fully engaged but is still early. The lockbar is jimped and easy to get at when it’s time to close the knife.

Blade centering is perfect on my knife. That is always nice to see. Here is a parting shot with the Cutjack next to the ESEE Zancudo:

Steel Will Cutjack Review – Final Thoughts

The Cutjack is pretty damn good for the money. It’s not perfect, but what do you expect for $40? I’d say its about 90% there. You get a lot of knife for the money. The overall design is excellent. The blade feels good in hand and cuts well. The knife carries nicely. The D2 steel is better than I expected. Little touches like the custom hardware show you that this knife was carefully considered.

It’s not a perfect piece. The inside edges of the handle are a little sharp. The deployment is on the sluggish side, and there is some side to side blade play. But this is a $40 knife, which means there will always be compromises in the execution of the knife. I think Steel Will has done a lot here, and that they allocated the money to the right places. I can’t think of much else that comes close to it if you want a flipper. What would you rather have for $40? The Skyline and Swindle are still excellent options, but they are lighter duty knives. The Cutjack is the kind of grab and go piece that finds itself making its way into my pocket over and over. It’s a great no-nonsense tool.

For these reasons I’m adding the Cutjack to my list of Best EDC Knives. I can easily recommend it if you are looking for a $40 EDC knife, and especially if you want a flipper. I still think the Zancudo represents an excellent value, and I think it’s slightly better made than the Cutjack, but the Cutjack is an excellent knife.

This knife will remain in my collection for the long term, and I’ll update the review as I continue to carry and use it.

Steel Will Cutjack C22M-1BL Linerlock, 3.0" (C22M- 1BL)

Steel liners on both sides, increasing overall strength and durability
Smooth and fast deployment with the press of a finger
D2 Steel Blade
G10 fiber handles

I recommend purchasing the Steel Will Cutjack at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.