Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

Victorinox Alox Cadet Review

by Dan Jackson 18 Comments

Think back to your first experiences with a pocket knife. If you are anything like me, it probably came in the course of exploring your father or grandfather’s desk drawers or perhaps rifling through that treasure box of items many men keep. Invariably, you would come across at least one well-worn red handled Swiss army knife (SAK). For many that would be their first encounter with a pocket knife.

Buy the Victorinox Cadet at BladeHQ

Buy on Amazon

And for many more, their first practical experiences with a pocket knife may very well have have been at boy scouts. I vaguely recall my first pocket knife while camping as part of my tenure at scouts. I am unsure on the exact model number, but it was some sort of a classic SAK. I would use it to prepare tinder for a fire, get ingredients ready for the dutch oven, and even used it to try my hand at carving one of those wood handkerchief slides. These were some of my first experiences with pocket knives. When I pause to reflect on those moments I am instantly transported back in to a much more simple and wholesome time of my life, with much of it centering around the ubiquitous Swiss army knife.

Fast forward to me starting to seriously get into the hobby of knives. My first “real” knife was a Benchmade Griptilian. From there I then ran fast and hard down the rabbit hole. I have handled many many pocket knives. Hell I have reviewed over a hundred here on this website alone. In my search for a perfect pocket knife I have spent thousands of dollars. At this point I don’t think twice about spending several hundred dollars on a single knife if it catches my eye. I’ve traveled to Blade show, joined a knife collecting club, appeared on podcasts, videos, and guest blog posts all to advance my interests in the latest and greatest portable cutlery.

But my knife collecting came full circle when a little over a year ago I was given the gift of a Victorinox Cadet. Mine was the very same unassuming blade that I would find in my father’s dresser drawer. Red plastic handles. Unassuming blade complete with the usual cap lifter and can opener. Instinctively, upon unboxing this new blade and admiring the snappy action of all the little tools I put the Victorinox into my pocket. It has been over a year later, and I haven’t left the house without some sort of a SAK since.

For many I am surely preaching to the choir. This is after all, the quintessential pocket knife. An unwavering staple in the every day carry of men the world over. I still want to pay my respects, write this review, and share with you a tool that I hold quite near and dear; the humble Victorinox Alox Cadet.

General Dimensions and Blade Details

The Alox Cadet has an overall length of 5.75″, a 2.5″ blade, and weighs 1.6 ounces. Victorinox makes the Cadet in a number of variations, I happen to like the one with the silver aluminum “alox” handles because it keeps the knife nice and thin and seems to wear a little better than its plastic-scaled counter parts. It’s also worth noting that Victorinox makes larger and smaller knives with the Alox handles as well. Ones that quickly come to mind include the Pioneer (larger) and Classic (smaller).

The Cadet is the perfect size for daily carry. Mine rolls around loose in the bottom of my pocket every day. At a sub $25 price point, I could care less if it gets beat up by my flashlight and car keys. Even if by some freak accident the knife it were to fall out my pocket some day I would have no problem plunking down the coin for another one.

When I am at work this is the only knife I carry. I spend most of my day behind a desk banging away at a keyboard or talking on the phone, so this little slip joint is plenty of knife for the things I do, which is mostly opening letters and packages. At home the Cadet can often be found cutting up apples, smearing cheese onto crackers, or handling whatever other minor task I may have at hand.

The thinly ground blade of the Cadet slices as good or better than anything else I have handled. Seriously, it’s a little laser and it cuts really well. Whatever stainless steel Victorinox uses sharpens very easily and doesn’t stain. This is a softer steel so it doesn’t earn a blue ribbon for edge retention, but it holds a decent edge and a couple licks on a strop will restore it to hair shaving performance at the end of the day. I’d say it’s on part with 8Cr13MoV and other lower end steels. The only other maintenance I perform is regularly washing the knife out with hot soapy water.

When I’m not at work I may clip a larger folder to my pocket, but the Cadet still comes in handy as a secondary blade. It’s perfect for situations where you don’t want to bust out a large knife, and the extra tools are real handy too. Victorinox includes a nail file / phillips driver, a can opener, and a bottle opener/flat head driver. Next to the blade my bottle opener sees the greatest amount of use, but the drivers can come in handy and the file can maintain your fingernails in a pinch. In a sub 2-ounce package you won’t find much else that packs as much utility as the Cadet.

Handle, Ergonomics

Handle construction of the Cadet is simple, but everything is clean and nicely finished. The knife is pinned together. The tools and backspacer are given a high satin finish while the aluminum handles are given a matte finish. After a year of daily carry and use my Cadet does show some signs of wear, but it is still a handsome knife. The action for all the tools is still springy and satisfying and there is no play with any of the parts.

A discussion of the “ergonomics” of the Cadet is almost laughable, as I have never used the knife for tasks harder than breaking down a cardboard box, but the handle is big enough to get 4 fingers around and is plenty comfortable for my needs. The handle texture is pleasing to touch and visually interesting. It provides some traction without being obnoxious. The red Victorinox shield provides a splash of color and that extra touch of class.

There is no pocket clip on the Cadet, which is just the way I like this knife. Unlike my $300 Strider PT, I have absolutely no reservations to pocket carrying the Cadet. It doesn’t need a little leather slip-sheath or anything like that, although Victorinox does include a split ring if you want to put a lanyard on it or attach it to your keys. It’s a beater knife and gets beaten up quite a bit in my pocket, but the slim design and durable aluminum scales allows the knife to age gracefully.

Victorinox Cadet Review – Final Thoughts

What is left there to say about the Cadet? Buy one. Seriously, this is an absolute must have knife. Buy a couple and give them as gifts to family and friends. You won’t find a nicer knife for $20 and you won’t find anything as functional and disarming either. That said, despite the small price tag this is still a very classy knife and it comes with an unexpected level of pride of ownership. And it performs too. This thinly ground edge can’t be beat for managing your mail and cutting up food. And all the extra tools are gravy… delicious, delicious gravy ladled on top of one of the finest little EDC knives money can buy.

If I had a gripe about the knife, it would be that I really like the little tweezers and toothpick included with the thicker plastic handled version of the knife, and sometimes miss that with the Alox Cadet. But there is a price to pay for style and durability, and the trade off is that Victorinox cant squeeze in those tools.

At this point I have waxed poetic about EDC knives for the better part of 5 years. This is the gold standard for EDC. Whether it’s your primary knife or a secondary blade paired with a larger folder or fixed blade, the Cadet is sure to get lots of use and will be appreciated by seasoned knife collectors and laypeople alike. I don’t say this often, but the Cadet is a must have knife.

Sale

Zero Tolerance (0450); With 3.25” DLC-Coated S35VN Stainless Steel Blade, All-Black Carbon Fiber and Titanium Handle Scales, KVT Ball-Bearing Opening, Frame Lock Reversible Pocketclip; 2.45 OZ., Silver, Small

Titanium frame lock houses hardened steel lockbar; frame lock secures blade in position so it does not close accidentally
Flipper works for left- and right-handed users; assists blade’s manual release with one-handed convenience
Finger guard, jimping and choil protect fingers during rigorous use while slicing, cutting, chopping, scaling, slashing, piercing or digging in any environment, in any conditions
Drop-point tip provides extra strength and chip resistance and eliminates pitch momentum
Overall length: 7.4 inches; closed length: 4.1 inches; blade thickness: 0.121 inches; weight: 2.9 ounces

I recommend purchasing the Victorinox Cadet at Amazon or BladeHQ. Please keep in mind that purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Strider PT Review

by Dan Jackson Leave a Comment

Last Updated: August 3, 2019
One of the best parts of blogging about knives is checking out other people’s blogs, and seeing what they really like. It often piques my interest and expands my collection into all sorts of unhealthy directions. Case in point, I had absolutely zero interest in the Strider PT until I read Tony’s post on it. Boom. It instantly elevated the knife up to “want” status and several weeks later I had the PT you see before you resting comfortably in my pocket.

Buy the Strider PT at BladeHQ

As usual, Tony did a great job reviewing the PT with a catchy intro weaving artfully into background info on the knife and of course leading into his famous (infamous?) 20 point scale. I won’t even pretend like I’m that sophisticated. I’ll just babble on in my usual, loosely organized fashion, and ultimately try to determine whether the PT meets my approval as highly as Tony’s did.

General Dimensions and Pocket Clip

The PT has an overall length of 6.5″, sports a 2.75′ blade, and weighs in at a paltry 2.3 ounces. Compared to it’s bigger brethren, the SnG and SMF, the PT is very much a true daily carry knife, and was designed with fans of small pocketable knives in mind. The PT falls into the pocket with hardly a whisper and rolls around with my keys and flashlight just like a $20 Swiss Army Knife might.

The blade is Strider’s iconic drop point, complete with oval thumb hole and well spaced jimping. The blade is flat ground but still has plenty of meat behind the edge. It will open letters and cut boxes, just don’t expect it to peel away translucent thin pieces of cheese like a true gentleman’s folder. The grind of the PT leans towards hard use, just like it’s bigger brothers.

My particular PT came in S30V blade steel, and features a gently stonewashed with an even edge bevel. I find the S30V relatively stubborn to work with, but I am still able to keep a decent edge on it. Despite the knife being well, a Strider, I opted not to super hard use instead relegating it mainly to cardboard and kitchen tasks> These are more of my normal EDC tasks for a knife of this size rather than a back yard beat down. It performed adequately in all the tasks I put it up to, although I wasn’t blown away by the performance of this blade. As I alluded to before, the grind on this knife is fairly chunky, and like my full size SnG, isn’t the best slicer in my knife drawer. The trade off of course is that you have a much stronger edge.

Handle, Ergonomics and Pocket Clip

The handle is classic Strider. You have an integral G10 backspacer and display scale, a titanium frame lock, and a proprietary pivot. Despite Strider’s notoriety for subpar fit and finish, my PT came superbly finished. Every aspect of the handle, from the tumbled titanium down to the lanyard hole, has been delightfully well done. So no fit and finish gripes here. It looks to me like Strider has listened to customer feedback and tightened up their tolerances. All of my Strider knives are well made and my PT is a wonderful collector’s grade piece.

It is also worth noting that this is the concealed carry (CC) version, meaning the handles have been convexed for a thinner, lighter, more discrete knife. Compare the CC PT with my traditional (aka “lego”) styled SnG below to see what I mean.

Despite being a small knife, the PT boasts very solid ergos. It’s unique handle shape and elongated dual finger choils make for a comfortable 4 fingered grip, even with larger hands. There is a rough run of jimping on the spine. It is not a big deal on a light use sub 3 ounce folder like this, but it does provide plenty of traction for opening clamshell casings and other harder tasks.

The pocket clip section is moot as there is no pocket clip on the PT CC. I know some will have a problem with this, but I don’t mind the clipless PT as I usually carry an Alox Cadet this way. I will say the toughest part about carrying this $300 knife clipless is dropping it into the lint filled abyss to have it rattle and roll with keys and spare change. While my classic SnG with tiger striped blade seems to only look nicer with wear, I find scratches harder to ignore with this this stonewashed clean shaven look.

I will say that the regular Strider PT comes with a clip.

Deployment and Lockup

The PT makes use of a thumb hole for blade deployment. The “thumbstuds” are external stop pins, and don’t work well for opening the knife. True to the knife’s meticulous fit and finish, I find the action on my PT nice and stiff. This is after months of opening and closings. Perhaps “purposeful” is the better way to describe the PT’s action, as I like stiff opening. The sturdy detent sucks the blade down with a satisfying click, not unlike the way the doors fall shut on a German car.

Lockup is accomplished by the titanium frame lock. There have been issues in the past with Strider lock ups, and the PT wasn’t spared in that controversy. My understanding is that Strider has gone to great lengths to address this issue in all their knives. My PT is the most recent generation of the knife, and it locks up early, sturdy, and without play in any direction. The lock release can be a little difficult to access. Given the stiff action and small lockbar, it’s more of a two hand closer in my book. I will say that everything feels is very secure.

Strider PT Review – Final Thoughts

The Strider PT is a lovely little knife. It is beautifully made, boasts classic Strider lines, and is small enough to carry in a suit pocket. This Strider is perfect for a paper-pusher like myself, but is tough enough to stand up to some real use.

I like the knife for what it is, small, well crafted, and unique. Some may not like it for what it isn’t. And one things it isn’t is a cheap knife. Retailing at $300 (if you can even find one) the PT isn’t for the light of wallet, and like most of my high end knife reviews, probably begs some discussion of value. I’ll spare you that lecture. Only you can decide for yourself whether the PT is “worth” the premium price tag.

I’m happy with mine but confess that 9 times out of 10 I still reach for my trusty Alox Cadet when I need a slim workhorse pocket knife to bump around with my car keys and flash light. But, the PT appeals to me on more than just a practical level and I do enjoy it. For that reason I don’t see it leaving my collection any time soon.

Strider PT – $300.00
From:BladeHQ KnifeArt

I recommend purchasing the Strider PT at BladeHQ or KnifeArt. Please keep in mind that purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade Volli Review

by Dan Jackson 19 Comments

Last Updated: July 27, 2019
I’m not sure how to put this delicately, so I’ll just come out and say it: Benchmade hasn’t done a whole lot of exciting stuff in 2013, and it has resulted in a lack of reviews on new Benchmade knives. This isn’t necessarily a bad thing, but the lack of cool new stuff to examine makes for boring blogging.

Buy the Benchmade Volli at BladeHQ

Buy on Amazon

One 2013 Benchmade has been on my radar for some time, and that is the Volli. It hasn’t gotten a lot of attention, probably because it appears to be some sort of a rehash between the Griptilian and Barrage, but again that isn’t necessarily a bad thing. And frankly there is a lot to like here. In the time I’ve spent testing out the Volli I’ve found it to be a very functional and practical knife. We sometimes overlook those qualities as the industry focuses more and more on big names and exotic materials, but I still think there is room in many people’s pockets for a robust EDC/tactical knife without a lot of frills or hype.

General Dimensions and Blade Details

The Volli runs the gamut from an urban EDC to a “tactical” pocket knife depending on where your needs and preferences lie. For me, it’s more of a nights and weekends knife than a true daily carry, but for many I’m sure it would do well as an EDC. It has a feature set that I would think appeals to the law enforcement / military crowd, and I’m sure Benchmade also had those types of users in mind when they put this knife together.

The drop point blade is clean and simple with a high flat grind, and fine tip. My model comes in a bright satin finish although they do offer a black coated version as well. The grind lines are crisp and the knife came wickedly sharp out of the box. This is a simple drop point pattern but it has been done right.

The blade is S30V, a steel that I haven’t always been a huge fan of despite it’s popularity and billing as a premium knife steel. In practice I’ve found that S30V has a reluctance to take a really fine edge, especially on a couple Spydercos that I own, and I’ve sometimes dismissed it as more trouble than it’s worth. Well, I’m pleased to say that whatever Benchmade did with the S30V on my Volli, they really did it right. This is one of the nicest S30V blades I have owned.

The Volli came screaming sharp out of the box, which is always nice, but more importantly I’ve been able to keep that screaming edge with some judicious stropping. The knife has proven itself to be a really capable cutter. As always, I did test this knife thoroughly. I went through a great deal of 1/2″ sissal rope without any problem – it was almost comical how easily it cut through the rope. Eventually the edge slowed down, but I was able to quickly bring it back with my strop. Same went for wood and cardboard – it cut large amounts of both with no problem. This is because of the relatively (2.5mm) thin blade stock and the nice lean grind. 2.5mm isn’t alarmingly thin but many EDC blades (like my Spyderco Sage 1 – also in S30V) comes in at 3mm. While some may find the thinner stock a turn off, I like it because the knife cuts, and it cuts damn well.

Handle, Ergonomics, and Pocket Clip

The handle of the Volli is G10 over full skelotonized stainless steel liners. Probably the first thing you will notice is the heavy texturing to the handle, but it’s also important to point out that it has a full plastic backspacer and you can’t access the pivot without taking off the display side scale. Construction is sturdy. All the parts line nicely while corner of the handle has been broken to accommodate your hand. There is a small unobtrusive lanyard hole and all the hardware is of the torx variety.

Ergonomically, this is a straight forward and practical handle design. Relative to something like the Griptilian this is a thin handle, but there is still plenty there to fill your palm and all the corners are nicely contoured. I found it to be comfortable, even under hard use. There isn’t any jimping, which is fine in my book. I was able to really bear down on the knife when carving and cutting and I didn’t notice any major hotspots. Much like the simple blade shape this is a practical handle, and I found it to largely be a pleasure to work with.

The pocket clip is Benchmade’s classic split arrow clip. This time it has been configured for ambidextrous tip up carry. The aggressive texture to the G10 means this knife will destroy your pockets if you aren’t careful (you will never find me carrying this with slacks), and that may be my greatest gripe. I understand that there is a fine line when designing a knife like this, and you don’t want something that offers no grip at all. Aside from the pant shredding texture the Volli carries well. This is a classic pocket clip and it holds the knife securely and discretely.

Deployment and Lockup

The Volli takes advantage of Benchmade’s axis assisted opening technology. It snaps opens quickly with the brush of a thumb. An assisted opening knife is mostly a novelty for me, but I can see the advantage if you are in a line of work where you really need your knife to open. Benchmade included a safety located on the back of the handle. It stays out of the way but can lock the knife in both the open and closed position, a nice feature when you have a tip up carry assisted opening knife.

For lockup Benchmade went with their trusty axis lock, a personal favorite. My knife came with a small amount of lateral play, and I had to tweak the pivot by removing the G10 scale. The covered pivot looks nice, but it’s a departure from the otherwise practical design and I’d be remiss to not consider it a problem with the design.

In addition to the axis lock there is a secondary locking mechanism on the spine of the handle. It allows the user to lock the blade in either the open or closed position. It’s not a bad feature to have on a tip-up assisted open knife. It’s unobtrusive and functional.

I have to say that after Michael commented on this post (see below) I both de-assisted the knife and I took the secondary lock out. I don’t proclaim to be an expert when it comes to disassembling knives, but I’ve taken down plenty. The Volli was a little tricky to take apart and the whole process took me the better part of a half hour. That said, if you are patient and don’t mind potentially voiding your warranty it shouldn’t be impossible. The knife works just fine without the spring and the safety.

Benchmade Volli Review – Final Thoughts

The Volli isn’t a show stopper. It isn’t the latest and greatest. It’s no ZT 0560 or Spyderco Domino as far as the “wow” factor is concerned. But I’m still pleased with the knife and it seems to fill a spot in Benchmade’s catalog. Detractors of the Griptilian’s plastic handles may have finally met their match, and I’m impressed with how nicely the knife cuts and feels in hand. The thinly ground blade is one of the best slicers I’ve handled in recent memory, and the S30V steel performed way better than I’m used to seeing out of S30V.

If I were designing it from scratch I’d tweak a couple things. I’d leave it so the pivot could be readily adjusted, tone back the texture slightly and (if it were me) remove the spring assist. But these are all pretty minor and subjective complaints that may not be relevant to your needs or preferences. While I’m not completely head over heels with the Volli, it is still a very nice knife, and I’d go so far to say that if you are someone looking for a robust folder in the 3.5″ blade category with S30V steel I’d put it above the Zero Tolerance 0350 and say it is very strong competition for the Spyderco Paramilitary 2.

It may not be a runaway blockbuster blade of 2013, but that isn’t because it’s a bad knife, it’s because it has been overshadowed by some very interesting and very adventurous offerings in a very competitive marketplace. If you are in the market for a sturdy high performance folder in S30V with a ~3.5″ blade, then the Volli is well worth your consideration.

Benchmade - Volli 1000001 Knife, Plain Drop-Point, Coated Finish

HIGH-QUALITY: The CPM-S30V stainless steel blade is extremely well-balanced, offering superb edge qualities and rust resistance. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures.
WELL-DESIGNED: The Volli 1000001 features Benchmade's AXIS Assist mechanism. It can be opened and closed quickly with either hand.
ALWAYS READY: The 1000001's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Volli 1000001's drop-point, utility blade style and all-around functionality make it ideal for everyday carry.
SERVICES AND BENEFITS: For information and terms regarding Benchmade's Limited Warranty and LifeSharp Service, please visit Benchmade's website.

Benchmade Volli – $153.95
From: BladeHQ

I recommend purchasing the Benchmade Volli at BladeHQ or Amazon. Purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated – thank you very much.

Spyderco Domino Review

by Dan Jackson 23 Comments

Last Updated: August 4, 2019
The Spyderco Domino is a knife that I almost wasn’t going to review. I’ve been following the Titanium Framelock Flipper Arms Race closely ever since the ZT 0560 took the production knife market by storm. Like pretty much everyone else, I’ve enjoyed these knives, but felt some initial hesitance to the Domino for some reason. I talk about this in my video, but I feel like the knife was almost too easy for Spyderco. After all, it parrots many of their already successful designs only this time we have a flipper, framelock, and bearings.

Buy the Spyderco Domino at BladeHQ

Buy on Amazon

Obviously I caved and bought the knife, and I am actually very happy I did. The Domino is a stellar performer and at a sub $200 price point I also think it’s a pretty decent value. Where else are you going to find the impressive feature set of the Domino, with a level of fit and finish that few companies can rival, with all the creature comforts of a Spyderco, for less than $200?

General Dimensions and Blade Details

The Domino comes in with an overall length of 7.68″, a 3.13″ blade, and weighs 4.1 ounces. The knife is a decent size for EDC. It’s a little larger and heavier than my Sage 1 (the quintessential EDC knife), but it still pockets well and makes for a reasonable daily carry.

The blade is a classic Spyderco leaf shape, and includes a full flat grind, a very fine tip, and a slight curving belly. It’s everything you need for an EDC blade. The 3mm thick stock is ground thin and the knife slices well. Although I must say that I find the wide blade is a little precarious tasks like carving apples, a task I often relegate to my trusty Victorinox Alox Cadet. Still, it will slice and dice with the best of them and I find it a good match to common tasks like opening letters and breaking down boxes.

Spyderco selected CTS-XHP steel for the Domino. CTS-XHP is made in America by Carpenter, and is supposed to be formulated with cutlery in mind. In practice I think it’s a good steel. It combines moderate edge retention with an ease of sharpening that I find lacking in steels like S30V. I had no issues with chipping or corrosion, and the steel took very well to both my strop and Spyderco stones. For those interested in extreme edge retention, I must confess that I found the steel a little lacking, but I am one of those people who prefers easy sharpening to ultimate edge retention so I wasn’t disappointed. I discuss this in greater detail in my video review.

Handle, Ergonomics, and Pocket Clip

The handle of the Domino sports a faux carbon fiber scale over a titanium liner with a titanium frame lock. You also get flow-through construction, a sleeved lanyard hole, and a steel lockbar insert that doubles as a lockbar stabilizer. My biggest beef with the knife has to be the ridiculous handle scale. I suppose Spyderco wanted to step it up a bit with an unusual handle appearance, but I could have done without the Domino patterned carbon fiber. Ruminating on this further, I think the knife would have been even nicer if they went for a full titanium handle rather than the carbon fiber (which is really just a thin veneer of carbon fiber over black G10 anyway). Some may appreciate this “unique” handle material, but I think the after-market knife modifier crowd will be in business for a very long time if companies continue to release knives with such blatantly distasteful handle materials.

The ergonomics of the Domino are good. This is what you would expect from a mid-size Spyderco. The bulbous handle fills the palm, while the double choils give you plenty of options for finger placement. There is a mild run of jimping on the spine of the blade that provides a little feedback without being overly aggressive, making the knife acceptable for extending cutting while still appealing to the TNP and mall ninja crowds. Although every folding knife handle is a study in compromise, I still found the knife reasonable to use in hard cutting situations like 1/2″ rope cuts and carving into bamboo.

The pocket clip of the Domino is sturdy and functional, although it won’t win any beauty contests. Spyderco selected a standard hour-glass clip and gave it a lustrous black chrome finish. It definitely beats a satin finished clip, while the chromed finish gives it a little depth and character. The handle is drilled and tapped for 4 corner carry, and the knife doesn’t ride too deep in any of the positions. On these more expensive knives I tend to like a knife with a one or two position clip over a knife with tons of holes in it, but functionally speaking there is no reason to complain. This knife itself is relatively thin and light and isn’t too obtrusive in the pocket. While the pocket clip and carry isn’t anything outstanding, the knife will certainly be able to get from A to B without issue.

Deployment and Lockup

Of course the Domino features a flipper, after all, that’s probably why you are interested in the knife. I am very pleased to report that the knife flips phenomenally. The detent is so well tuned that the blade practically explodes out of the handle when you press down on the flipper tab. I am very happy Spyderco took the time to ensure this aspect of the knife was squared away, as the action alone makes the knife worth the price. The over-sized pivot and caged bearing system certainly doesn’t hurt the performance either, and the knife is very fluid even when using the thumb hole.

For lockup you have a very nice stonewashed titanium framelock that includes a steel lockbar insert. In theory this steel insert should prolong the lifespan of the lock, and if things ever wore out you could (again, theoretically) replace the insert. In practice the knife is rock solid, without even a suggestion of blade play in any direction. Much like the other titanium framelocks I have seen come out of Spyderco’s Taichung factory, they got the geometry right and the lockup is worry free.

The steel insert also performs double duty as an overtravel-stop mechanism (sometimes called a “lockbar stabilizer”). This prevents you from hyper-extending the titanium when disengaging the lock. I’ve never had this problem, it’s a nice touch and aesthetically it doesn’t detract from the knife.

Spyderco Domino Review – Final Thoughts

In conclusion, the Domino is one hell of a knife. Here we have classic Spyderco fare like a thumb hole, 4-corner pocket clip, and good ergonomics coupled with the latest crazes in modern knifemaking. That alone should be reason enough to give this one a try, but I am very happy to report that they really executed this right. As I mentioned alone, for a flipper aficionado the action alone will be worth the price of admission, and Spyderco has once again turned out a very high quality product from Taichung Taiwan.

Of course an obvious comparison would be with their previous flipper, the Southard, and it’s worth taking a second to differentiate the knives. First of all, the action on the Domino is vastly superior to the Southard. The detent on the Southard is acceptable, but it is weak in comparison to the crisp action in the Domino. Also, the design of Southard may be a little “out there” for classic Spyderco fans. Personally, I find the Southard to be a far more interesting knife, but to each their own. I am sure the Domino will appeal to traditional Spyderco fans.

Of course I do have a few issues with the knife, and I might as well re-cap them now. Mainly I wish they went a different route with their handle scale, but I could also do without 4-corner carry on a $200 knife, and same with a sleeved lanyard hole. I think both the lanyard sleeve and funky carbon fiber detract from the appearance of the knife. The pocket clip could use a little work too. But by and large this is a solid effort for Spyderco, and I think it will be an excellent addition to anyone’s collection of high end production knives.

Spyderco Domino Plain Edge Knife

Category name: locking-knives
Country of origin: taiwan
Brand name: Spyderco
Tip Carry Position Tip-Up/Down

I recommend purchasing the Spyderco Domino at BladeHQ or Amazon. Thanks for checking out the review.

Hogue EX04 Review

by Dan Jackson 5 Comments

Last Updated: August 4, 2019
It’s fun covering the latest knife trends. Case in point, the whole titanium flipper framelock schtick has has been an absolute blast. That said, I love it when a knife company completely bucks the trend and comes out with something that is bold, inventive and well executed.

Buy the EX-04 at BladeHQ

No products found.

Without spoiling the review for you, the Hogue EX04 is just that knife, and is one of the more interesting blades I’ve had the pleasure of handling in 2013. I must not be the only one who feels that way, as the EX04 won American-made knife of the year at the 2013 Blade Show.

Designed by world renown custom knifemaker Allen Elischewitz the EX04 marries an intriguing design with the same precision manufacturing and technical excellence that I gushed over when I penned my first Hogue review on the EX01. From the custom hardware down to the mirror polished edge, there is a lot to discuss with this knife, so lets get right into it.

General Dimensions and Blade Details

The EX04 comes in 2 sizes, the 3.5″ bladed version, shown here, and a version with a 4″ blade. My knife has an overall length of 8″ and weighs 4.48oz. I trend towards smaller knives for daily use, and found the 3.5″ version a good choice for urban EDC. That said, there is certainly enough knife here for use as a dedicated work or “tactical” knife.

The EX04 comes in 2 blade shapes, an upswept variant (shown here) and one with a modified wharncliffe blade. Both feature a unique double grind; a first for a production knife. I spoke with Allen Elischewitz about this personally, and he told me Hogue went to great lengths to consistently pull this unique blade geometry. I can’t say it does much functionally (although the knife is ground thin and cuts extremely well), but it is definitely a very cool detail that I really enjoy.

Hogue went with good ole 154CM which is an American stainless steel regular readers and knife aficionados should be well acquainted with. I have had a lot of good experience with 154CM, including Hogue’s 154CM when I reviewed the EX01 a while back. This time around I wanted to perform some more formal testing. The knife edge held up very well in performing a variety of EDC tasks including cutting rope, cardboard, and some basic carving. This is a useful blade shape made out of a nice balanced steel, and will provide years and years of service with very little maintenance.

Handle, Ergonomics, and Pocket Clip

The EX04 benefits from a full, sculpted G10 handle. There are no liners, although there are stainless steel bolsters that also function as washers. Like the rest of the knife the handle is superbly finished. The G10 is smooth and well contoured. The major hardware is silver and has been given a matte finish. Everything is just super refined on this knife – even the lanyard hole has been elegantly integrated.

From an ergonomic standpoint the EX04 continues to impress me. The simple sloping curves of the handle are also 3d contoured and lightly textured, which provides a good balance of comfort and grip. There is a distinct absence of jimping on the knife, which makes it very comfortable and practical for normal use. Mall ninjas will cringe at this obvious “oversight”, but as someone that actually likes to use his knife I assure you that the lack of jimping is actually a good thing.

The pocket clip is the same large spoon style offering found on the EX01. This time it has been given a durable black coating for a more discrete appearance. Some will probably find issue with the bulbous nature of the clip, but I think it’s practical and works well. The knife carries nicely in the pocket – it’s slim and lightweight and is the kind of I knife that I want to carry. If I were to give the clip a demerit, it would be for the right side tip up only carry. I understand that there may have been some design limitations requiring this clip placement, but for me tip up carry would have been preferable.

Lock and Deployment

The EX04 has ambidextrous thumb studs for deployment. They are easy to get at and the knife snaps open smoothly and crisply with little effort. An interesting feature of this knife is the absence of any kind of washer or bearing system. Instead, the blade mates up directly to stainless steel bolster plates that both reinforce the knife and serve as the “washers” for the blade to glide against. In practice this works very well, as evidenced by the very smooth and satisfying action.

As I mentioned in the intro, the EX04 makes use of a button lock to secure the blade. It’s a nice departure from the liner and frame locks that creep into many of my folding knife reviews, and Allen has gone to great lengths to ensure that the EX04 came with a robust and reliable lock. My lock occasionally sticks a little bit. I am not sure if I need to clean it, lubricate it, or break it in more, but I do experience a little stick in the button lock from time to time.

The knife also comes with an external safety switch that locks the knife open. On the EX01 I found that the safety was too easy to engage, and would inadvertently lock the knife open, but I was relieved to find that they have made the safety button much more purposeful. It doesn’t engage accidentally, and you really need to consciously push it to lock open the knife.

Hogue EX04 Review – Final Thoughts

The EX04 is a beautiful knife. I gave it a glowing review, and I think it’s well deserved. The knife has a unique design, has been flawlessly executed, and is very practical to carry and use. If I were to make suggestions, it would be to find a way to enable tip up carry.

Besides that, this is nothing short of an awesome knife, one that I find a true pleasure to have in both my collection and my pocket. It is a premium offering, and commands a premium price tag, but this is another one of those instances where you get what you pay for.

At the time of updating this review (end of 2015) the EX-04 remains one of my favorite 3.5″ folders. It’s a beautiful tool that speaks to me on a number of different levels. Highly recommended.

No products found.

I recommend purchasing the Hogue EX04 at Amazon or BladeHQ. Thanks for checking out the review!

Viper Carnera Review

by Dan Jackson 2 Comments

Last Updated: September 16, 2019
Viper Knives is a relative newcomer to the US cutlery scene, and is a division of the Italian manufacturer Tecnocut, a company that I am frankly not that familiar with. I was first acquainted with Viper at Blade Show 2013 it was there that I had the opportunity to handle most of their line. Like many of the knives coming out of Maniago Italy I was impressed with the sophisticated designs coupled with tight fit and finish. One blade that especially caught my eye is the Carnera – a long lean chopper named after Italian pugilist Primo Carnera.

Buy the Viper Carnera at BladeHQ

The knife’s sleek lines remind me somewhat of an Italian sports car, which certainly doesn’t hurt a first impression, but what I found most intriguing was how balanced and comfortable the knife felt in hand. This was something that had the potential to be a serious tool: light, balanced, comfortable, and featuring well finished high end materials. I couldn’t resist, so the Carnera ended up traveling back with me from the show.

General Dimensions and Blade Details

The Carnera has an overall length of 15.25″, features a 9.5″ blade, and weighs in at 17.5 ounces. The knife is approximately the same length as the ESEE Junglas, but in hand they are radically different knives. The Junglas is an absolute tank. If I needed something to survive the end of days and didn’t mind some extra weight I would put the Junglas on my short list. It was and continues to be one of my all time favorite heavy duty choppers. The Carnera, on the other hand, is much more efficient and refined. Its sweeping handle flows into a broad and confident clip point blade. It has a slight forward bias lending it towards chopping, but it still feels fast and fluid. The stock is thick but the wide blade coupled with a full flat grind lightens the knife significantly. Where the Junglas could be considered an all out survival knife, I feel like the Carnera is more suited for work as a camp knife or heavy machete.

I should mention that the knife comes in 2 main flavors; the stonewashed version with wood handles and leather sheath shown here, and a more military inspired version with a black PVD coated blade, micarta scales, and a cordura molle compatible sheath. Both versions can be examined on the Viper wesbite.

Viper selected D2 for the Carnera. D2 is a semi stainless, which on paper seems like a good compromise given that the blade is naked but still needs to be tough enough to resist chipping under heavy use. Done right D2 provides a good mix of toughness, edge retention, and resistance to corrosion. I’ve had good experiences with D2 and I’ve had OK experiences with D2 – it depends entirely on the heat treat. Done right it can be a great steel (as evidenced by master knifemakers like Bob Dozier using D2 exclusively).

Thankfully my experience with the Viper and it’s D2 blade has been nothing short of excellent.

As usual, I wish I could have taken this guy up into the Rocky mountains, or better yet, the Italian countryside for some extended use and testing. I had to settle on the less exotic location of my back yard. The good news is that I had a dead ficus tree that was in desperate need of an ass kicking, so I can at least assure you that this knife saw a good amount of use.

I mostly chopped with this knife. I chopped through thick tree limbs (anywhere from 4-7″ in diameter) and did quite a bit of limbing, light chopping, and clearing as well. It’s a great chopper. The full flat grind gets reasonable thin and comes to a nice traditional V edge. The knife bites deeply into wood and the D2 holds a nice aggressive edge, even after extended chopping sessions. There is enough weight behind the blade to get some good work done without the knife being overly heavy. A practiced hand should be able to get a lot of work done with it. My technique leaves something to be desired, but I was still pleased with the end result.

I will say that the full flat grind does not lend itself to batoning, which was not a big issue for me. If I really needed to split with this knife I’d use the Carnera to carve up a wood wedge and use that instead.

With a retail price of over $200, it’s worth talking about the fit and finish of the blade. The grinds on my knife were even and the edge was perfectly applied. The spine is capped (rounded) which is a very nice detail on a production knife. My version of the Carnera came with a lightly tumbled finish. This is a good choice for a semi stainless steel like D2. That said, I did notice a light patina form on my knife, and generally found it more difficult to keep clean. An application of [easyazon-link asin=”B000V72992″ locale=”us”]Bar Keeper’s Friend[/easyazon-link] or a similar cleaning agent will brighten it back up instantly. Alternatively, you could always opt for the PVD coated variant.

Handle and Ergonomics

One thing I immediately liked about the Carnera was the traditional wood handle scales. I think the wood is a very handsome option, although their micarta offering would probably be a little more practical. Viper selected Pau Santo wood for the handles, a wood I was previously unfamiliar with, but it has a pleasing and tight symmetry to the grain and strikes me as a great choice. The handle slabs have been bolted on, and were left with a smooth semi-glossy finish. There are 2 lanyard holes although I always used the knife without any lanyards and found that the grip was still secure.

The secure grip is thanks in large part to the elegant flowing handle design. The handle has these seductive curves t that are visually appealing but also highly functional. The knife felt very controllable in my hand, even when I was tired and sweaty after an extended chopping session. Not once did the knife slip of feel insecure, and it was extremely comfortable as well. I am very pleased with the handle design. It’s beautiful, comfortable, and entirely functional.

Sheath

The Carnera comes with 2 options for the sheath: the leather sheath (shown here) or a cordura molle compatible military style sheath. Generally speaking, I like the leather sheath. They used thick pieces of leather and it compliments the traditional wood handles, although I would have loved it if Viper made this with a brown leather sheath – I think that would have looked especially handsome. The wide blade profile means they had to get creative with the sheath design, but the end result looks good and works well.

Practically speaking, the knife is securely held in place with a single snap, and the sheath features a generous belt loop with an easy to remove snap. It is adjustable and comes with a piece of cord that could be used as a thigh rig. I can see how the wide clip point blade provides a challenge for designing the sheath (much like a kukri style blade does), and given that limitation Viper came up with a sturdy and functional sheath. That said, this is a knife that I could justify having a custom kydex sheath made for – and I may eventually decide to do just that.

Viper Carnera Review – Final Thoughts

The Carnera is my first extended experience with a Viper product, and I was left very impressed. For a guy that likes capable choppers the Carnera is a lot of fun, but it is a serious tool that benefits from a very practical, very functional lightweight and balanced design. The sleek Italian lines, tasteful material selection, and excellent fit and finish make it a very well rounded package that should appeal to both collectors and enthusiasts.

As for potential downsides, this is a premium offering from Viper and the price reflects that, but you get what you pay for and I don’t think their retail price is entirely out of line. Perhaps the biggest problem is that these knives are still somewhat difficult to acquire here in the States. Thankfully, BladeHQ has recently picked them up (at least the stone washed version of it), so I expect we will be seeing more and more of this knife in the days to come.

Viper Carnera – $239.95
From: BladeHQ

I recommend purchasing the Viper Carnera at BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews. As always, any and all support is greatly appreciated! Thank you very much.