Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

CRKT Obake Review

by Dan Jackson 18 Comments

Long time readers know that I have always had a soft spot for pocketable fixed blade knives, and CRKT has proven on a number of occasions that they know how to make them. So the announcement of the Obake, a compact fixed blade collaboration with CRKT and custom knifemaker Lucas Burnley, definitely caught my attention.

Buy the CRKT Obake at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00I04SZMI” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

Lucas is best known for his Kwaiken Flipper, an elegant Japanese inspired design. CRKT’s decision to pick up Burnley’s fixed blade variant of the Kwaiken strikes me as a smart decision given the immense popularity of his Kwaiken series of knives.

The result is a mash-up of traditional and tactical that marries a classic Asian aesthetic with contemporary materials all wrapped up at a sub $40 price point.

General Dimensions and Blade Details

The Obake has an overall length of 7.63″, a 3.64″ blade, and weighs 2.4 ounces. While some of my other favorite CRKT fixies; the Minimalist and SPEW, are firmly in the EDC knife camp, I think that the Obake is more of a “tactical” (self defense geared) offering. This is due to the relatively large size of the knife and its shank-like construction. The full tang knife is ground from .13″ thick steel and has a thick grind emphasizing strength over slicing performance.

This isn’t a knife that I like to peel apples with, but it definitely could blow through one if you felt so inclined. While I consider this larger than an EDC knife, it is still slim and streamlined, and tucks away discretely in your waistband or pocket (more on that below).

The Obake sports a slender drop point blade. The tip is fine but it has enough meat behind it to work into wood and get some work done. The spine has been gently rounded which is a nice detail that CRKT has integrated into more and more of their offerings. Perhaps the most striking aspect of the blade is the aggressive acid-etched finish. When I took this knife to my monthly knife collector’s club meeting, I had a couple people ask me if the blade was made of damascus. Nope, it’s just good ole fashioned 8Cr14MoV given a deep acid etched finish.

8Cr14MoV is a budget friendly Chinese stainless steel. I like it for its ease of sharpening and toughness, and the price is tough to beat. Here the knife has been heat treated to between 56 and 58 HRc. It has held up well against the mild chores I have put the knife to; mostly cardboard and some food prep. The knife is not an incredible slicer due to the thick blade stock, narrow profile, mid height hollow grind, and textured blade finish, but you can certainly open mail and break down boxes with it if you need to. My guess is that the Obake is best suited in a self defense type role, which is a role that I know very little about. That said, it doesn’t take a PhD in material science to realize that this design can stab very efficiently. So if a stabbing implement is what you need the Obake could be a good option.

Handle and Ergonomics

One of my favorite parts about the Obake is how they approached the handle. In paying homage to the Japanese roots of the Obake’s design, Lucas Burnley originally offered the knife with a traditional wrapped handle over rayskin. CRKT followed suit with a cordwrap over a synthetic ray skin. I wasn’t sure what to expect from a sub $40 knife, but they actually did a really nice job with this. The cord wrap is tight and well done, and the rayskin looks pretty legit. I really don’t know how well this will hold up under hard use, but in my daily carry the handle has worn well and still looks pretty good. Then again I didn’t roll it around in the dirt or go scuba diving with it, but if you are reasonably careful with it I see no reason why it won’t hold up for a good long time. Underneath the wrap and ray skin is a full tang blade.

From an ergonomic standpoint, the handle is generous enough to support a full 4-finger grip and the knife is as comfortable as you would expect. The cord wrap provides a lot of traction and the simple design fills the hand and works in both forward and reverse grips. I’m no martial artist so I really have no idea how this would stack up compared to other offerings, but I found it comfortable.

Sheath

The sheath for the Obake is a nice low profile molded plastic sheath. The sheath is almost always the Achilles heel on a budget fixed blade, so I’m pleased to report that CRKT has done this one right. Retention is very firm. At first I really needed to jerk the knife out, and to this day it requires a strong pull to break the knife free from the sheath. CRKT has also offered several eye holes and slots for various mounting options.

Lucas Burnely has an interesting suggestion for carrying the Obake. He has designed the knife for in the waist band (IWB) carry. Lucas suggests that you secure the paracord lanyard to your belt, stuff the sheathed knife blade first into the waist band, and then when you need to use the knife, grab the handle and pull it hard away from your body. The blade will pop out of the sheath, and the sheath will stay tethered to your belt. I’m probably not doing a great job explaining this, but the idea is that you can quickly and safely access the knife without losing the sheath.

In practice I have found this method of carry to work well. I’ve been a fan of using a lanyard with a small fixed blade, attaching the lanyard to my belt, and carrying the knife in pocket, but the Obake is a little longer than say, the Folts Minimalist. The knife is slim and light and disappears on your belt line if you leave your shirt untucked.

CRKT does supply a 550 cord lanyard and skull lanyard bead. I’m not big on skulls (I guess I’m not that hard), but I am sure this will appeal to a number of folks, and must admit that a bead of some sort rounds out the package nicely.

CRKT Obake – Final Thoughts

For those seeking a slim “tactical” fixed blade knife, the Obake is well done and priced to sell. I think that the juxtaposition of modern and traditional combined with a high level of fit and finish lend it broad appeal. I also found the selection of materials and finishes very interesting. Although I am not a martial artist by any stretch of the imagination, this is still a fun knife to have in the collection and it is easy to carry. Mechanically speaking, the 8Cr13Mov steel is adequate and while the sheath is excellent. I really enjoy the details like the faux ray skin and rounded spine.

One other thing I find worth noting about the Obake is that there is nothing else like this on the market at this price. CRKT has been hitting their stride lately with some bold collaborations with hot makers. While some companies have seemed to stagnate over the past couple years, CRKT is gaining ground as they straddle the crossroads of high value and high design. That kind of approach doesn’t always pan out, but knives like this and the Swindle strike me as great examples of when this strategy really pays off.

This is is something of a specialized tool, so I won’t give it a blanket recommendation to anyone browsing the site, but if you are interested in the Obake I would definitely recommend it. It is a complete package at a sub $40 price point, and they are going to have a hard time keeping up with the demand.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00I04SZMI” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

CRKT Obake – From $37.95
From: BladeHQ

I recommend purchasing the Obake at BladeHQ or [easyazon-link asin=”B00I04SZMI” locale=”us”]Amazon[/easyazon-link]. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Kershaw Injection 3.0 Review

by Dan Jackson 5 Comments

Last Updated: August 3, 2019
These days in the world of high value folding knives we have some pretty stiff competition. Old standbys like the Spyderco Tenacious and CKRT Drifter continue to be tough to beat while recent contenders like the ESEE Zancudo, Ontario Rat II, and CKRT Swindle are re-defining what is possible with a low budget folder.

Buy the Kershaw Injection at BladeHQ

Buy on Amazon

But when you are paying less than $40 a pop there is plenty of room for more, which is why my reinterest in budget blades has led me to the recently released Kershaw Injection.

Sporting a Todd Rexford design and lots of “custom” details, the Injection has the potential to be an all-star budget blade. But will it join the ranks of elite inexpensive folders or fade away into the shadows of obscurity? There is only one way to find out…

General Dimensions and Blade Details

The Injection 3.0 has an overall length of 7″, sports a 3″ blade, and weighs 3.30 ounces. This knife feels pretty heavy for a 3″ blade, but the Injection is still firmly in the EDC camp. For those appreciating a larger knife, Kershaw has thoughtfully decided to offer this model with a 3.5″ blade, aptly named the Injection 3.5. Everyone is a little different when it comes to their ideal EDC blade length, so I think that it is fantastic that Kershaw decided to offer this model in two sizes straight out of the gate.

The blade shape on the Injection is a very basic drop point. It may be a little boring, but it certainly works well with its fine tip and full flat grind. This is a very practical choice for EDC. One aspect that I don’t particularly like about this blade is the bead blasted finish. This inexpensive finish is prone to rusting and doesn’t look particularly good. I think it’s a misstep on a knife that is trying to appeal to the consumer based on it’s details, but I guess you can’t have it all at $30. Beyond the blade finish there is very little to gripe about.

The steel in this knife is 8Cr13MoV, a staple in low-end Chinese knives that I have spoken about ad nauseam. But don’t let my familiarity with the steel turn you off, I don’t mind 8Cr13MoV when the price is right. It compares well to AUS8 in that it won’t hold an edge forever, but it is durable and easy to sharpen. Despite being a stainless steel it can rust, and my particular knife did stain a little when I left it unattended on a shelf for a few weeks. You definitely want to keep an eye on this steel and apply a little oil if you are looking to maintain a totally rust free blade. All said, for a ~$30 folding knife it’s tough to beat 8Cr13MoV.

Handle, Ergonomics and Pocket Clip

The handle is where the Injection starts to get interesting. Taking center stage is the full G10 3-D machined handle scales. They feature a tasteful milled pattern and are subtly contoured. Intricately machined and 3-D sculpted handles are a feature often absent on $100 knives, let alone $30 ones, and this is the most impressive aspect of the knife. Further adding to the custom flair is the oversized decorative pivot and milled G10 backspacer with inset lanyard pin (rather than a lanyard hole). These are undeniably great details in a budget knife, and it elevates the Injection from beater blade to something much more interesting. The handle construction is also very solid. There are no gaps or cracks and all the pieces line up well. Underneath the G10 scales are solid stainless steel liners. It makes for a very solid knife, but it does add weight to the little Injection 3.0.

In hand the Injection 3.0 feels just a little short. Maybe that is because this is a very straight handle, which means that there is less surface area, but I found my fingers a little cramped. Granted I do take a large glove, so please keep that in mind. I will say that the basic handle shape makes the Injection easy to hold in a couple different positions and I didn’t notice any hot spots. Reverse grip is actually super nice with the angular shape of the pommel, but I can’t say I’ve actually used the Injection with a reverse grip yet. The entire knife is free of jimping which is fine for an EDC knife. This is a relatively thick knife and it fills the hand and has held up under harder use. If I were intending to use this knife for serious work I would opt for the larger version.

The pocket clip is simple, but it is also tasteful and well executed. The innocuous triangular clip is sure to appeal to a broad crowd, and it is positioned for decently deep tip up carry. The clip has a bead blast finish which further adds to the discrete look. The clip is swappable for left or right side carry, but fans of tip down carry are completely out of luck. Personally, this is not an issue.

Deployment and Lockup

For deployment you have dual decorative thumb studs. Despite the interesting milled details on the thumb studs, they are still very easy to access and quite practical. I had no problem flicking the blade open with the push of my thumb. Inside, there are metallic washers that appear to be phosphor bronze. This isn’t the smoothest knife I have handled, but if these are real phosphor bronze washers then the knife will only get smoother with time.

For lockup you have a sturdy stainless steel liner lock. My knife locks up 100%, but is free of any play. The liner lock is also easy to disengage and doesn’t stick. The full G10 scales and full stainless liners make for a robust knife that inspires confidence. Blade centering on my knife is favors the non-locking side, but it doesn’t rub and is acceptable for a knife of this price point.

Kershaw Injection Review – Final Thoughts

The Kershaw Injection is a solid attempt at a value folder with some high end details. The 3-D machined G10 scales, decorative thumb studs and pivot, and G10 backspacer are all high end finishes more commonly found on a custom knife than a Chinese production blade. But the off center blade, stiff pivot, and bead blasted finish bring us back down to earth. I also was not a huge fan of the weight and cramped feel of the handle. These are all minor gripes, and I realize you can only do so much with a budget knife, but I feel obligated to say something. While I like aspects of the Injection 3.0, it doesn’t make my list of recommended budget knives. There are definitely knives I prefer over the Injection at this price point.

Still, the effort Kershaw put into this one is apparent and the Injection is certainly capable as an EDC. The fact that I am even nit-picking a $35 folder shows that we are truly spoiled to have so many interesting and high quality budget blades at our disposal. Ultimately, this is a decent buy at $35 and I recommend it to fans of the design.

Kershaw 3820 Injection 3.0 Folding Knife

Liner lock -Thumb stud -Reversible pocket clip -Steel: 8CR13MoV
Bead-blasted finish -Handle: 3D-machined G-10
Blade length: 3 in. (7.6 cm) -Closed length: 4 in. (10.2 cm) -Overall Length: 7 in. (17.8 cm) -Weight: 3.3 oz. (93.6 g)
Liner lock; Thumb stud; Reversible pocket clip
Steel: 8CR13MOV, bead-blasted finish

I recommend buying the Injection at Amazon or BladeHQ. Thanks for checking out my review.

Chris Reeve Mnandi Review

by Dan Jackson 13 Comments

Last Updated: January 10, 2018
When I think Chris Reeve Knives, I first think of the Sebenza, their flagship blade. Then my mind wanders to the Umnunzaan, their amped up tactical offering. Only after sampling both of those knives did I take a genuine interest in the Mnandi. It was one of those knives that I knew that I wanted to check out, but would have to get around to it eventually. My guess is that frame of mind holds true for a lot of collectors, especially those getting into knives within the past 10 years like I did in the middle of the tactical knife boom.

Buy the CRK Mnandi at BladeHQ

And that is a shame because the Mnandi is a really nice knife. Before moving forward with this Chris Reeve Mnandi review, I need to disclose that my Mnandi was built in 2011. Chris Reeve has since made some subtle refinements to the knife. Most notably, the pocket clip has been changed to a hidden hardware design, and the blade steel has been upgraded to S35VN over the S30V model shown here. Finally, the nail nick has been changed slightly. Some prefer the old style nail nick show.

General Dimensions and Blade Details

The Mnandi has an overall length of 6.375″, sports a 2.75″ blade, and weighs 1.5 ounces. The knife is firmly in the EDC or gentleman’s folder segment. I carry mine to the office no problem and prefer it over a bulkier knife for EDC. It could easily fall into the collectible market given the wide range of inlays available, although I do believe that this is a knife that was made to be used.

The blade shape is a modified clip point design. I like the lean, aggressive profile of the blade, and the angular nail nick further accentuates that low slung profile. The short belly terminates at a fine upswept tip, and the hollow ground blade has been given a nice satin finish. Like the other CRKs I have handled, the spine is nicely rounded. This blade shape is fine for EDC, easily opening mail, breaking down packages, and taking care of other minor chores around the house and office.

Blade steel on this particular knife is S30V, although if you were to buy a Mnandi new today it would likely come in S35VN. I was surprised to get a little flak in my large Sebenza review for reviewing an old model of the knife with S30V instead of S35VN. Practically speaking there is very little difference between the two steels. At higher hardnesses the S35VN will be a little easier to sharpen, but beyond that most people won’t notice much of a difference. I found the S30V on this knife very easy to maintain. Chris Reeve Knives is known for heat treating their blades on the softer side to aid in ease of sharpening. I don’t have a problem with that when it comes to my EDC knives, but edge retention junkies would prefer a harder heat treat.

Handle, Ergonomics, and Pocket Clip

The handle of the Mnandi is where things really start to get interesting. The knife is available with a large number of exotic wood inlays and is even offered with mammoth ivory bark and bone. My knife happens to have an African Blackwood inlay. Underneath the wood scales is full titanium construction. One thing I never really noticed about the Mnandi until I got one in my hand is that the titanium is actually two-toned. The flats have been given a satin finish while the edges are media blasted. It’s a really nice detail. On the back side of the knife you have a very nice flow through design. There is a single decorative standoff and a stop pin.

The Mnandi is a small knife but the handle offers plenty of room for a full grip and the knife is surprisingly comfortable to use. The arced handle supports your fingers much in the same way the Spyderco Dragonfly does, and you have some excellent jimping on the spine of the blade as well. CRK really knows how to get jimping right. It’s not thumb-shreddingly aggressive, but it provides enough traction to keep you in the game. Between the wood onlays, titanium handles, and 3d machined pocket clip you have a decently thick and comfortable handle. I wear a large glove and for a small knife, the Mnandi really works ergonomically.

The pocket clip is one of my favorite details of the knife. It is a 3-D machined stainless steel clip. It buries the knife in your pocket, is very secure, is discrete, but also has a nice decorative element to it. I’ve reviewed well over 100 knives on this site, and this is definitely the nicest clip I have come across so far. Chris Reeve recently updated the clip, making it a hidden hardware (no visible screws) design. It’s impressive that they figured out a way to improve on this already awesome pocket clip.

With all that said, my favorite way to carry the Mnandi is in the little leather slip sheath it came with. I haven’t tried to hide my love affair with the Victorinox Alox Cadet, one of my all time favorite EDC knives. A big part of the reason why I like that knife is because it’s perfect for pocket carry. Well, the Mnandi is also great for pocket carry, and if you use the leather sheath it helps protect the knife from getting beat up in your pocket. I highly recommend buying the leather slip sheath if yours doesn’t come with one.

Deployment and Lockup

The Mnandi relies on a stylized nail nick for opening. Visually, the nail nick really suits the design, and it works fine for one hand opening too. It’s ambidextrous, and I am pleased to report that I can open the knife left handed without much trouble. The action on my knife is super smooth. Like all of the other CRK offerings, this blade rides on phosphor bronze washers, and it has a smooth, glassy action that I find extremely satisfying. This is what owning a CRK is all about. It’s also worth mentioning that the pivot hardware is all custom, with the Chris Reeve logo engraved on the show side, and a collared pivot on the other.

For lockup you have a Chris Reeve Integral lock. My particular knife locks up late, but it’s very secure and there is no stick or issues with it. There isn’t much else to say although I will mention that blade centering is perfect.

Chris Reeve Mnandi Review – Final Thoughts

The Mnandi is the third model I have sampled in the CRK lineup, but it may very well be my favorite. Everyone is different, but these days I really get a lot of mileage out of small EDC knives that I can pocket carry. The Mnandi is about as good as it gets in that department. This knife is perfectly executed, has a lot of interesting details, and has been very satisfying to own. I can’t think of much to complain about, although I fully appreciate that for many, the $375.00 price tag will be a non-starter.

It’s small and expensive, so I’m not saying this one is for everyone, but if you have any interest in the Mnandi do yourself a favor and buy one. I have really enjoyed mine.

Chris Reeve Mnandi – From $375.00
From: BladeHQ

I recommend purchasing the Mnandi at BladeHQ or KnifeArt. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

CRKT Swindle Review

by Dan Jackson 15 Comments

I have been on a bit of a high value folder kick recently, focusing especially on the $30-40 segment. I’ve neglected this part of the market over the past year or two, favoring fixed blades and higher end folders, but a good deal of interesting stuff has come out in the $30-40 arena, hence the recent reviews of the Ontario Rat II and ESEE Zancudo, and I have a few more in the works.

Buy the CRKT Swindle at BladeHQ

Buy on Amazon

While the knives I have handled at this price point are solid and very functional, they are somewhat formulaic, and have a heavy emphasis on being tools rather than design objects. There is nothing wrong with that, as many seeking out a $35 folder want a good tool knife, but something has to be said for interesting design.

That is definitely not the case with today’s knife, the CRKT Swindle. Designed by Ken Onion, the Swindle pays homage to the classic swayback jack pattern, but features many modern touches like 3-d machined handles, a flipper, IKBS, a framelock, and a very interesting pocket clip. Ken and CRKT have definitely pushed the envelope in what is possible with a $30 folding knife, and we are all the better for it.

General Dimensions and Blade Details

The Swindle has an overall length of 7.5″, has a 3.2″ blade, and weighs 3.3 ounces. The long thin design really stretches out the blade and the end result is a practical gentlemanly type folder that works well for EDC, but also stretches into dress knife territory as well.

The full steel handles (gun metal gray with a matte texture to look like titanium) give the knife some extra heft, but it is still very carryable. And while it isn’t a “tactical” knife by any means, the long narrow blade comes to a very fine tip. It’s plenty stabby and I wouldn’t want to be on the business end of it.

The blade is an elegant modified wharncliffe design. Again, it’s a throwback to the swayback jack pattern of yore, with a high hollow grind, neatly applied edge, subtle belly and needle fine tip. Out of the box the Swindle came screaming sharp and ready for work. The narrow blade is plenty capable when put up against cardboard, and it makes for an ideal letter opener at the office. I also used the knife with some success when breaking down a chicken carcass. The upswept tip requires some extra flexibility, but it is fine for detail work. I really like that CRKT went ahead and rounded the spine. That’s a high end finish that I really like. I also like how they went for a satin finish over a cheaper bead blast. It shows off the nice even grinds and is more resistant to rust.

CRKT offers the Swindle in 2 blade steels: 8Cr14MoV on this model with the plain handle scales, and 12C27 Sandvik on the more expensive grooved version. I’d prefer 12C27 on the plain handled version honestly, but this 8Cr14MoV isn’t bad for the price. Similar to AUS8, this is a proven steel found on other budget folders like the Spyderco Tenacious. It’s a softer steel but it sharpens easily, takes a nice satin finish, and holds a reasonable edge. At this price point it’s hard to find much else, and I do like how they give you the option of 12C27 if you want to spend a little more money.

Handle, Ergonomics and Pocket Clip

The handle is plain stainless steel finished gunmetal gray to resemble titanium. I love how the handles are 3D machined, and I am impressed with how well made this knife is. CRKT has all their product manufactured in Taiwan, and the Taiwanese manufacturers really have their act together. 3 screws hold the handle together: one for the pivot, one for the pocket clip, and one for the backspacer. The end result is very elegant. Even the lockbar cutout arcs gracefully, and when the knife is closed the blade tucks completely inside the handle. This kind of stuff you just don’t find on $30 folding knives. Compared to my clunky Tenacious, Ken Onion and CRKT have thrust the value folder into rarefied air.

From an ergonomic perspective the Swindle works very well for an EDC knife. The handle is large enough to accommodate a 4 finger grip, and the curved shape fits naturally in the palm. I’m not usually a big fan of jimping, but CRKT found a great balance of grip and comfort in the jimping on the spine of the Swindle. The jimping here very much reminds me of the jimping found on a Sebenza’s, and the rounded spine furthers the connection. If you throw the knife in reverse grip a second run of jimping on the backspacer catches your thumb nicely.

The pocket clip is quite unique, and is more something you would find on a pen than a pocket knife. It sits on the back of the handle, kind of like an extended backspacer, and is spring loaded to provide tension. I won’t go so far as to say it’s my favorite pocket clip (because it isn’t), but it works, and it fits well with the theme of the knife. No doubt this will be a polarizing point for some folks. I think it’s a bold touch on an equally bold knife, and it has been well executed and further distinguishes this knife.

Deployment and Lockup

For deployment you have a flipper on IKBS bearings. The detent is well tuned and the blade flies out with the push of a finger. The action is very nice. The flipper is a low profile design, but it’s jimped to provide a little extra traction. Again, CRKT has managed to find a sweet spot in cutting jimping that is practical without being over the top aggressive. I am still not sure if bearings are 100% necessary on a knife, but here it has been well implemented and I certainly am not complaining. The Swindle, with its relatively light blade, flips with the best of them.

For lockup you have a stainless steel frame lock. It locks up early and securely and I did not experience any play in my knife. Lockup has settled in right around 25%, which shows that they paid attention to the tolerances and geometry of the frame lock, and suggests that it will hold up for a long time. Blade centering is also dead perfect, which, while not a requirement on a $30 knife, again elevates the sense of pride of ownership, and my overall appreciation for this tool.

CRKT Swindle – Final Thoughts

I have had a number of really nice high value folders cross my desk these past few weeks. Knives that I enjoy and recommend. The Swindle is truly something else. Not only is it functionally a very solid knife, it has so many details and little upgrades that I find myself examining it from the perspective of a higher end folder. I haven’t loved all of Ken Onion’s designs, but this one truly deserves accolades. It’s outside his typical work, and has allowed him to showcase his talent as a designer. The pocket clip may not be “perfect” by everyone’s standards, but it works well in the context of the overall knife. Barring that I find very little to complain about the knife.

I decided to photograph my Swindle next to my Kershaw Cryo on purpose, to show what is possible for a $30 folder, and two steel framelock flippers at that. Both knives feature big name designers, but beyond that the knives quickly diverge.

With the Swindle you have a graceful and balanced knife, whereas with the Cryo you have a stubby little brick. The Swindle features a rounded spine and 3-d contoured scales, while the Cryo is slab built with sharp edges. With the Cryo you get an off-center blade and shitty assisted opening. With the Swindle you get a manual action knife with a beautiful detent and an IKBS bearing system. With the Cryo you get a coated blade, with the Swindle you get a nice satin finish. The Swindle is an exercise in minimalism and restraint, while the Cryo is pockmarked with holes and screws.

I don’t mean to turn this into Cryo bashing, after all, I felt that the Cryo was an OK knife for what it was (although disappointing in many respects). But next to the Swindle there is no comparison in my mind; the Swindle is a superior EDC knife, and CRKT has redefined what’s possible with a $30 folder.

The design of the Swindle may not be for everyone, but if the knife interests you at all I suggest buying it. I wish I jumped on mine earlier. Highly recommended.

Columbia River Knife & Tool Columbia R Swindle Knife COLUMBIA RIVER KNIFE & TOOL Swindle Folder, One Size

Fast Opening: IKBS ball bearing pivot deploys the blade fast
Brute Strength: Frame lock utilizes a thick lock bar to secure the blade
High Tech: Tensioned clip secures knife to the pocket
Designed by Ken Onion in Kaneohe, Hawaii
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Swindle at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

ESEE Zancudo Review

by Dan Jackson 32 Comments

Last Updated: September 30, 2017
By now most people are well acquainted with ESEE knives and their variety of fixed blade offerings. Hallmarked by their thick powder coatings, 1095 steel, USA origins, and unlimited lifetime warranty, I have grown to be quite a fan of ESEE products, and hold their Junglas and Izula II in especially high regard. ESEE is known for their no nonsense form over function tools, so it was quite interesting to see that ESEE was taking on a folding knife, and a sub 3″ framelock at that.

Buy the ESEE Zancudo at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00H83DBQ2″ cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

The design of the Zancudo, which, by the way, is the Spanish word for mosquito, is unassuming enough. Whether it will live up to the legacy of their fixed blade offerings is an entirely different question.

General Dimensions and Blade Details

The Zancudo has an overall length of 7″, sports a 2.94″ blade, and weighs 3.1 oz. This is a great size for suburban EDC, although I don’t doubt it will do well at a camp site preparing food or performing other light camp chores. The sub 3″ blade is an interesting choice. There is plenty of room to gain a few extra millimeters so my guess is ESEE is trying to make a knife that flies under jurisdictions where 3″+ blades are outlawed. The full steel liner and steel frame lock add some heft to the knife, but it’s still slim and light enough to be an easy carry. In talking with globe-trotting renaissance man Kyle Ver Steeg on the podcast, I was surprised to learn that he prefers a small folder for most of his adventures. This could very well be an option for a trip to the Amazon, or disaster relief effort in the Philippines.

Your blade shape is a sloping modified drop point design. The spine of the knife droops down to almost a spearpoint, and the end result is a very utilitarian design with a thicker tip and relatively short belly. The blade is flat ground nice and thin, and the edge bevel has been neatly and uniformly applied. In practice the knife makes easy work of typical daily carry tasks like opening mail, cutting up fruit, and breaking down packages. A handsome dark stonewash has been applied for a well worn look right out of the box. The end result is an innocuous looking blade that packs plenty of punch for daily tasks. There are a lot of logos and markings on the blade. The mosquito on the back side is interesting; can’t say I have any other folders that share that distinction.

Blade steel is classic AUS 8, par for the course for any low price Taiwanese or Japanese made knife. I’ve said it before, I’ll say it again, AUS-8 is a relatively mild steel. Edge retention isn’t its claim to fame, but I have gotten plenty of work done with AUS-8, and it is extremely easy to sharpen and maintain. It’s also a very tough steel. For a sub $30 folder it’s a welcome choice.

Handle, Ergonomics and Pocket Clip

The handle on the Zancudo is so simple it is almost boring. It’s a form follows function kind of knife, and I don’t have a problem with that. On the show side you have a faux G10 scale over a full steel liner, on the lock side you have a tumbled stainless frame lock. The knife is of pillar construction and features a lanyard hole. One interesting detail is that the hardware on the locking side is stainless while the hardware on the non-locking side is black. This is a thoughtful and attractive touch. Thy could have easily gone with all stainless or all black hardware, so I like that they paid attention to this detail. It is also important to note that everything has been really well finished. There isn’t a sharp corner or unnoticed detail. Even the liner and inside of the frame lock has been polished to a mirror-like sheen.

While on paper the handle of the Zancudo looks a little goofy, in hand it all makes sense. Mike Perrin decided to stretch this handle out to afford the user the full length of the handle without a choil or large guard. The resulting grip is sure and comfortable, and the knife is ready for work. The very short run of mild jimping is perfect for indexing your thumb and providing some level of traction without chewing into your flesh. The plastic scale, while inexpensive and not my favorite feature of the knife, has been patterned to mimic peel ply G10. The results are understated, and you have traction without the trauma often associated with aggressive G10 handles.

The pocket clip is functional but has an almost Ken Onion-esque curvature to it. I think it may be some sort of OEM piece, as I could have sworn I have seen this clip on another knife. The bend to the clip is quite severe, and it results in very sturdy and secure retention. The fact that it butts up against smooth stainless steel will save your pockets and make this knife easy to access. The clip comes right side tip down but the handle is also ready for right side tip up carry. The Zancudo is nice and slim and I found it very pocketable. The extra weight isn’t really noticible on heavy denim, but there are lighter knives out there if watching weight is your thing. I think ESEE’s product line is ripe for a lightweight version of the knife, as that would likely be of greater appeal to the weight conscious hiking and outdoors crowd.

Deployment and Lockup

Much like my Rat II, a firm flick of the ambidextrous thumb studs will send the blade flying out, and the blade glides on phosphor bronze washers. The thumb studs are simple and easy to get at, the way thumb studs on this kind of knife should be. No complaints in the deployment department.

For lockup you have a steel framelock, and it is very robust and well implemented. Fresh out of the box I noticed a little blade stick, but that quickly calmed down and has been replaced by effortless rock solid lockup. Given how relatively thin both the blade stock and lockup are, I am impressed by the early (50%) lockup on this knife. That combined with the dead center blade provides a sense of pride of ownership that you don’t typically encounter with bargain basement blades.

ESEE Zancudo Review – Final Thoughts

Much like the Rat II, the Zancudo isn’t a particularly sexy knife, but it is practical, robust, and well made. You also can’t argue with the price. ESEE always manages to infuse a good deal of character with their knives, and I am happy to report that the trip overseas didn’t wash that character away. The tumbled steel, matching hardware, and big black bug on the blade all play a part in distinguishing this knife from the competition.

2017 Update: This is among my favorite knives in the $30 range, and it makes it to my best EDC knives list. Although I have always liked this knife, I didn’t come to this conclusion immediately. It was only after years of carry and use that I realized the depth of the Zancudo – how thoughtfully designed it was. It’s beautifully built for the money. I prefer it over the Rat II, and can think of little else that matches it at this price point. If you are on the fence about the Zancudo my recommendation is to buy it without hesitation.

[easyazon-block align=”center” asin=”B00H83DBQ2″ locale=”us”]

I recommend purchasing the ESEE Zancudo at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Ontario Rat II Review

by Dan Jackson 19 Comments

Last Updated: March 9, 2018

Not everyone who reads the site knows about this, but I do have a couple sections dedicated to knives I have reviewed and recommend. Of particular interest could be the recommended EDC knives section, and the recommended tactical knives section, as these types of knives are generally pretty popular. When browsing those lists there are a few special knives that make the cross over to both categories.

Buy the Ontario RAT II at BladeHQ

Buy on Amazon

Typically, these are gold standard blades like the Spyderco Paramilitary 2 and Benchmade Griptilian which are great knives, but clock in at $110+ and $70+ respectively. But then there is another category, the recommended high value knives section, where I try to limit the knives to $50 or less. It is quite rare to find a knife that can fall into all 3 categories. The Ontario Rat I is one of those knives.

I reviewed the RAT I a couple years ago, and I am still of the opinion that those seeking serious bang for their buck when it comes to a big EDC / “tactical” knives would be well served with a RAT I. That’s great for guys wanting a big knife, but what about the rest of us who are looking for a more pocket friendly EDC?

Enter the Rat II. It has everything we all know and love about the Rat I, but in a much more compact package.

General Dimensions and Blade Details

The Rat II is 7″ long, has a 3″ blade, weighs 2.75 ounces, and is made in Taiwan. This is a great size for urban EDC. It is both pocket and people friendly, and you still have enough knife to get some real work done. Of course, if you are looking for something larger then the Rat I has you covered.

The blade is a modified drop point design. Nothing about this knife is particularly sexy looking, but this plain utilitarian blade gets the job done. The full flat grind is thin, and the knife zips easily through all manner of material. The tip is plenty pokey for detail work while the bright satin finish is both attractive and corrosion resistant. They do offer the knife with a shiny black coating, but it is not very durable. I prefer the satin finished version.

Just like the Model I, the Rat II comes in AUS 8 blade steel. Steel snobs may turn their nose up at AUS 8, but my own testing and use has proven again and again that AUS 8 takes a great edge, is super easy to maintain, doesn’t chip out easily, and resists rust and corrosion. For a $30 folder, AUS 8 is about as good as it gets.

Handle, Ergonomics, and Pocket Clip

The handle on the Rat II features the same robust design of it’s bigger brother. You have plastic scales over full stainless liners with pillar (or “flow through”) construction. It is simple and effective. I also like the choice of handle colors and the black hardware. This knife is made in Taiwan, and like many of the other Taiwanese knives I have handled, this knife features exceptional fit and finish. One nit pick is that the handle scales are plastic. I would prefer some G10, but some corners have to be cut when your are targeting the under $40 market.

From an ergonomic standpoint the Rat II is pretty good. Obviously it’s not going to be as comfortable as the oversized Rat I, but, given the size of the knife I was still able to get a nice grip on it with my larger hands. Extra large hands may run out of real estate, but you could always choke up near the ricasso and gain a little extra room. The plastic scales are comfortable. All the corners have been rounded, and a texture provides some feedback without being aggressive. The jimping on the other hand is pretty aggressive. Under extended use this jimping definitely bites into your thumb, and I don’t like that aspect of the knife. All said though, and this is a decent knife to work with.

The pocket clip is a classic shape (think Benchmade or Emerson), comes with a painted satin black finish, and can be put on any of the 4 corners of the knife. It’s simple, discrete, and totally functional. The painted clip does show wear easily, but this is a user so I don’t mind. In pocket the knife rides low and stays where you want it to. I really cant complain about its simple and utilitarian design.

Deployment and Lock Up

For a low end knife the Rat II is surprisingly smooth. The Aus 8 blade glides on sintered bronze washers. A gentle nudge of the ambidextrous thumb studs sends the blade cascading out with a satisfying “thwack”. The blade on my knife came perfectly centered, which adds another level of enjoyment to the knife.

For lock up, you have a robust liner lock. This is a beefy liner lock, and there isn’t even a suggestion of play when I tug the blade in any direction. This is a great choice for hard use tasks, and I don’t hesitate to use this as a work knife. In fact, it’s a great choice for those nasty jobs you don’t want to risk a more expensive knife with. The blade locks up tight and the lock bar disengages easily when you need it to.

Ontario Rat II Review – Final Thoughts

For the money the Rat II is a hall of fame blade that makes my lists for both recommended EDC and recommended high value knives. It may not be the prettiest pony in the stable, but if you subscribe to the philosophy of function over form, want a folding knife with a 3″ blade, and have around $30 to spend, then the Rat II could be just the knife you are looking for. My biggest gripes were about the plastic handle scales and aggressive jimping. Beyond that I find very little to complain about, and these are easy objections to overcome given the price.

Just like it’s big brother, the Rat II is a no-nonsense tool ready to provide years of service.

Sale

Ontario Knife Company Rat II, Satin AUS-8 Stainless Steel Drop-Point Blade Folding Pocket Knife, Black Nylon Handle Liner Lock Knife, Everyday Carry Knife – ON8860

secure: the ambidextrous handle features textured black nylon 6 scales with an open-built steel linerlock frame
comfortable: the rat-2 knife is a handheld size designed for comfort and performance making it ideal for everyday carry
dependable: quick and easy access with dual thumb studs and a 4-way reversible pocket clip
"durable: the rat-2 comes equipped with a 3" plain edge blade made of reliable aus-8 stainless steel as well as a textured nylon handle"
"convenient size: the 4. 1" closed length handheld size is ideal for every day carry and fits in the hand and pocket comfortably"

I recommend purchasing the Ontario Rat II at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.