Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

Benchmade 15080-2 Crooked River Review

by Dan Jackson 33 Comments

Last Updated: July 19, 2019

It’s no secret that I think the creative team at Benchmade has been adrift for the past few years. This is perhaps best evidenced by the fact that the company’s most exciting new offerings are actually re-issues of old models: the 940-1 and 551-1. These rockstar designs are interspersed among more puzzling offerings like the 808 Loco and 300 Axis Flipper.

Buy the Benchmade Crooked River at BladeHQ

Buy on Amazon

But Benchmade does seem to be cobbling together a theme. They seem to be taking this “old school, meet new school” approach not only to their classic designs, but also by melding traditional designs with modern manufacturing in their “Hunt” lineup. I thought the Small Summit Lake was a successful mashup of traditional lockback folder with modern materials, beefy construction, and precision manufacturing. The 15080 Crooked River is a knife cut from that same cloth.

In fact, the Crooked River takes the juxtoposition even further. This is an even greater departure from tradition to the point where we almost have a caricature of the classic bowie. Yet there is still a timeless quality to the knife. The low slung blade and bolstered handles tug at the heartstrings of traditional knife design, while the finishes and flourishes appeal to this fan of modern folding knives.

General Dimensions and Blade Details

The Crooked River has an overall length of 9.3″, a 4″ blade, weighs 5.41 ounces, and is made in the USA. This is a big knife, and is far outside the confines of what I would consider to be an every day carry (EDC) piece. If you were to whip this out in public to trim packing tape or open an envelope, most people would hide under their desk. And if a friend offered up a Swiss Army Knife at a campsite, you could go full Crocodile Dundee on the guy with this Crooked River. This is a “knoife”. I wouldn’t mind a smaller, more manageable version for daily carry.

The Crooked River features a long and lean clip point blade. I have always enjoyed a good clip point for it’s practicality, and the Crooked River is no exception. The high flat grind has been nicely executed complete with Benchmade’s 2-tone stonewashed satin finish. The blade is cut from an impressive 3.15mm thick piece of S30V stainless steel, and it carries a significant amount of steel out all the way to the tip. The end result is a blade that has a good tip for piercing, plenty of edge for cutting, and a nice belly for food prep and possibly even skinning.

The choice of S30V stainless steel for the blade is less exciting now then it may have been 5 years ago. These days I prefer S35VN for it’s improved toughness and ease of sharpening over S30V, but in my opinion Benchmade has always done a great job with their S30V. For example, the S30V on the Volli continues to impress me with it’s sharpness, edge holding, and ease of maintenance. I think Benchmade knows how to make the most of this steel.

The blade geometry of the Crooked River is stouter than the Volli, but this is still a functional blade and the S30V performs nicely on this knife. Capable of taking a keen edge, and holding it for an acceptable period of time, the S30V on the Crooked River is still functional despite there being sexier steels on the market. No issues with corrosion either.

Handle, Ergonomics, and Pocket Clip

The Crooked River has a long curving handle that compliments its long curving blade. The combination of diamond wood, aluminum bolsters, and orange pivot collar is striking, and I am sure that decision alone has sold many 15080-2’s for Benchmade. If resin-injected wood isn’t your thing, then Benchmade also offers the Crooked River with smooth gray G10 handle scales.

Underneath the scales are full stainless steel liners (skeletonized) and a bright orange G-10 backspacer. Holding things together is a large black pivot and blackened steel hardware. Everything is precision fit, and there are a number of nice details to enjoy, like the arced face between handle scale and bolster, the geared backspacer, and of course the snazzy orange pivot collar. Even the lanyard hole is oval and chamfered, adding style to an otherwise mundane feature of a knife.

Despite there being a good deal of weight around the pivot, the balance point on the Crooked River is behind the axis lock, and is close to the “hump” of the finger choil. The hand feels most at home here; set back further on the knife. While this isn’t billed as a tactical folder, I would be curious to get someone like Chad’s take on the Crooked River. I have no doubt that a knife like this could be pressed beyond pure utilitarian purposes if the need arose.

Beyond my comments on the balance of the knife, the Crooked River benefits from a subdued approach to ergonomics and traction. The long handle provides plenty of room, even for extra large hands. The diamond wood scales offers some texture (not much), while a mild run of jimping on the back of the handle indexes the thumb while still allowing the user to cut with the knife for extended periods without significant thumb fatigue. All said, the ergonomics have proven to be adequate for my purposes.

The Crooked River is a big knife. While I don’t think 5.41 ounces is overweight given the build quality and footprint, it’s still substantial, and when closed the knife is pivot heavy. This creates something of a pendulum effect in your pocket. Benchmade has tried to counter this with a stiff pocket clip. This is a good idea, and my Crooked River holds firmly in place.

On the subject of pocket clips, Benchmade went with a black parkerized version of their split arrow clip. I have always liked the split arrow clip, and here it is situated high on the handle for a relatively deep and discrete carry. The handle is also drilled and tapped for ambidextrous tip up use. That said, Benchmade’s deep carry clip will fit on this knife, and if you prefer a more discrete deep carry option Benchmade typically will send you a deep carry clip free of charge if you ask them nicely.

Deployment and Lockup

While some may grow bored with the axis lock, it remains one of my favorite locking mechanisms. I like the easy one handed opening and closing. Plus it’s fully ambidextrous. And I don’t know if I am simply bullshitting myself, but to me it looks like the phosphor bronze washers on these Benchmades have gotten thicker over the years. Much like my new 551-1, this Crooked River is smooth and easy to open. The blade pops into place with a satisfying “snick”, and the ambidextrous thumb studs are easy to get at with either hand.

Unlike some of the axis lock knives that have crossed my path, my Crooked River locks up tightly and without any play. Blade play is a common complaint on axis lock knives, but I have found that most knives can be fixed with a targeted application of Loctite. Here, blade play was a non-issue, and the axis lock remains as practical and easy to use as ever.

Benchmade Crooked River Review – Final Thoughts

Not to get all jingoistic on everyone, but the Crooked River appeals to the red blooded American in me. This knife takes me back to my childhood, handling my dad’s old Buck fixed blade tucked away his closet next to the well worn Swiss army knives, and old harmonicas.

There is an undeniable charm to the Crooked River that strikes at that primal note that has drawn many people to knife collecting in the first place. While not the most practical offering for an erudite urban EDC, the Crooked River is unapologetically bold and beautiful, and I think it is one of the nicer new designs from BM.

The Crooked River is a knife that I would like a smaller version of. As it stands I don’t see it getting a ton of use personally, but perhaps it has a place in your collection. If the Crooked River piques your interest in the same way that it piqued mine, then I am pleased to report that it is a well made and satisfying folder.

Benchmade - Crooked River 15080 EDC Knife with Wood Handle (15080-2)

BUILT FOR THE HUNT: Simplicity and style meets unmatched function, no matter the application; An ideal hunting knife capable of countless tasks in the field.
AMERICAN MADE CPM-S30V STEEL: For first-rate edge retention and corrosion resistance; Clip-point construction for easily controlled cuts.
STABILIZED WOOD HANDLE: Is made from a durable composite material that's been backfilled with resin; Stands up to a range of harsh elements and environments; Stronger than natural wood.
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Reversible split arrow clip; Lanyard hole for versatile carry options.

I recommend purchasing the Benchmade Crooked River at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade G10 Griptilian 551-1 Review

by Dan Jackson 29 Comments

I wasn’t one of those guys that had a big issue with the plastic handles on the original Griptilian. I always thought they were light and durable. Maybe not the sexiest choice of materials, but certainly practical. But for many the plastic handles of the Griptilian were a source of contention at best. At worst they were a deal breaker.

Buy the Benchmade G-10 Griptilian at BladeHQ

Buy on Amazon

So for the longest time if you wanted a Griptilian with G-10 handle scales, you had to go to the after market. This market was pioneered by ex-pat Kevin Wilkins. His line of WilkinsGRIP aftermarket scales were the enthusiast’s best choice if you wanted a G10 Griptilian.

Benchmade finally came around in late 2015 and released both the 551-1 Griptilian and 556-1 Mini Griptilian with G-10 handles. This is arguably the most exciting thing Benchmade has done since the 940-1 Osborne.

This knife was provided to me free of charge by the fine folks over at KnifeArt. In no way has this impacted my impressions of the 551-1. I think the people over at KnifeArt are good guys, I think they run a quality website, and I appreciate their letting me check out this 551-1. Now on to the review.

General Dimensions and Blade Details

The 551-1 has an overall length of 8.07″, a 3.45″ blade, weighs 4.17 ounces and is made in the USA. The G10 version is almost an ounce heavier than the original Griptilian, but it does not feel heavy for it’s size, and seems significantly lighter than my WilkinsGRIP equipped BM 552 / Ritter Griptilian.

The 551-1 has an identical drop point blade to the original Griptilian and is offered with your choice of thumb stud or thumb oval. I always preferred the look of the thumb stud version of the Griptilian, so that is what I got.

When I compare this blade to my original Griptilian the only difference I can detect is that the blade has been given a bit of a stonewash. Of course, the 551-1 features a new blade steel, and I will talk about that below. But beyond that you have the same excellent blade shape of the original Griptilian, with a saber flat grind, and swedge. This classic drop point shape has served me well for many years now.

Besides the switch to G-10 scales, the biggest news about the 551-1 is change to CPM-20CV blade steel. This is a steel that I was previously unfamiliar with. Manufactured by Crucible Industries, CPM-20CV is advertised as a steel with high corrosion resistance and wear resistance, and good toughness. Chemically it is similar to M390, which is an excellent steel. CPM-20CV has an extremely high chromium content, which results in its corrosion resistant qualities. From what I can gather, this appears to be a good choice for a folding knife. It may not have the toughness of a steel like 3V, but I think the extra corrosion resistance is a nice trade off here. My regular 154CM Griptilian has been through the ringer, and it occasionally shows small spots of rust if I forget to clean it.

My 551-1 came razor sharp from the factory, and this 20CV seems to hold an edge well. So far I have used the knife to break down a few boxes, open mail, etc. I haven’t wailed on this knife like my original Griptilian and so far have only needed to gently strop the knife to maintain its edge. No corrosion or complaints thus far, but I am not 100% convinced that this steel is worth the price premium over regular 154CM to me.

Still, it’s an interesting steel and I intend to keep this knife for long term testing and evaluation. I’ll update this review as I “gather more data points” and use the knife in the coming years. So far so good.

Handle, Ergonomics, and Pocket Clip

Obviously the handle is the main event here for the 551-1, and is basically the entire point of this knife. I am pleased to say that this new G10 handle has been beautifully executed. It is fully 3-D machined, and features bright blue liners and anodized blue backspacers beneath gray overlays. I am not sure if the gray-blue combo would have been my first choice, but the blue certainly “pops” here and my handle has been flawlessly executed. I am hoping Benchmade will roll out some other color combos in the future.

Like the original Griptilian the 551-1 features partial nested steel liners. That is about the only similarity with the handle construction of the original Griptilian. Even the hardware has been upgraded on the 551-1. This new handle is a totally different animal and it transforms the look and feel of the knife.

My favorite aspect of the new handle is how they shaped it to match the contours of the original Griptilian. If you handle aftermarket scales for a Griptilian, they are usually very big and boxy. These aftermarket handles change the ergonomics substantially and add additional weight. That is not the case for the 551-1. Here you get a feel in hand that is very faithful to the original FRN Grip. Of course there is a little extra weight, and the G-10 does feel slightly different, but the overall profile and hand filling nature of the original model has not been lost in translation. Benchmade did away with some of the extra texturing on the handle, and the diamond pattern here isn’t quite as grippy as on the original knife, but there is plenty of grip here for me and I’d go so far as to say that this is an improvement over the original knife from an ergonomics perspective.

Benchmade decided to include a deep carry pocket clip on the new 551-1 rather than their original spoon clip. I like this deep carry clip. It makes for a discrete knife that I have actually worn with slacks at work a few times now. This is a proven clip design. I think the 551-1 carries well for what it is. This is a larger knife, and it is heavier than it’s FRN predecessor, but this is still something that normal guys can carry and use and I think this is a viable EDC option (although admittedly the mini-551-1 is really all you will need for 99% of your EDC tasks).

Deployment and Lockup

Benchmade has equipped the 551-1 with an impressively beefy set of phosphor bronze washers. Because you have an open back design, the washers are very prominent on this knife. The blade flicks open effortlessly. This is a satisfying knife to open and close. Whether you decide on the thumb stud version or the thumb hole version I don’t think you will have a problem accessing the blade.

Of course for lock up you have an axis lock here. I have discussed the axis lock for years now. It remains one of my favorite locks as it is fully ambidextrous and allows you to easily open and close the knife with one hand. I find that the use of G10 handle scales adds a lot of structural rigidity to an axis lock knife and the 551-1 is no exception. It feels solid, and may inspire more confidence in the end user than FRN.

Blade centering is perfect on my knife, as I would expect from a nearly $200 folder.

Benchmade 551-1 Review – Final Thoughts

I must admit I was somewhat skeptical about this knife given the enormous price premium over the regular FRN verion, but the 551-1 has been beautifully executed, and I can see where the extra money went. They didn’t just slap some G10 on this thing and call it a day – every single facet of the original Griptilian has been re-considered and in someway upgraded. It’s clear Benchmade spent a lot of time and effort to dial in the 551-1.

Compared to its FRN predecessor, this new 551-1 is simply a superior tool. If the original FRN scales drove you up the wall, then the 551-1 cures that ill handily, and if you are a Griptilian fan I’d say this is basically a “must buy”. I was skeptical at first, especially given the price point, but the 551-1 has exceeded my expectations.

Benchmade - Griptilian 551-1 Knife, Drop-Point Blade, Plain Edge, Satin Finish, Gray Handle G10 Handle, Made in the USA

HIGH-QUALITY: The CPM-S30V stainless steel blade is extremely well-balanced, offering superb edge qualities and rust resistance. The glass-filled nylon handle is tough yet attractive, making it ideal for hard jobs and everyday carry.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Griptilian 551 is a manual knife that can be opened and closed single-handedly.
COMFORTABLE: The 551's lightweight design and handle grips make it comfortable to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Griptilian 551's drop-point utility blade style and all-around functionality make it ideal for everyday use, outdoor activities and even tactical applications.

I recommend buying the 551-1 at Amazon, or BladeHQ, KnifeArt.com. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Code 4 Review

by Dan Jackson 5 Comments

I have slowly worked my way through most of Cold Steel’s standard folders. I have reviewed the Voyager series, the Recon 1s, the American Lawman (probably my favorite), and even some of their more colorful offerings like the Spartan and Rajah III.

Buy the Cold Steel Code 4 at BladeHQ

Buy on Amazon

For some reason it has taken me a while to get to the Code 4 line of knives. The Code 4 series is different because they come with slim aluminum handles rather than G10 or plastic. Cold Steel advertises this as a police officer’s duty knife. Apparently a “Code 4” is police radio code for “No further assistance necessary”. Heady stuff.

At any rate, the knife is supposed to be light, slim, and tough. Functional yet easy to carry. That all sounds good to me. And once Cold Steel announced that they would upgrade the Code 4 to CTS-XHP I knew that I needed to make this model a priority. Soon enough I had one at my doorstep for review.

General Dimensions and Blade Steel

The Code 4 has an overall length of 8.5″, a 3.5″ blade, weighs 4.3 ounces, and is made in Taiwan. While it’s no Large Espada, this is still a big knife. Too big for me to EDC at the office, but certainly a good choice for the weekends or working in settings where a larger knife is appropriate. I can see where the Code 4 might make sense for a first responder or military member.

It is also worth mentioning that this is another clean and functional Andrew Demko design for Cold Steel. I have become a big Demko fan over the years, and think he has contributed a lot of great designs to the company.

Cold Steel offers the Code 4 in 3 different blade shapes: clip point, spear point (shown here), and tanto. I settled on the spear point because I think it is the most utilitarian looking of the 3, and I used my Code 4 as an EDC and work knife.

Cold Steel also offers the Code-4 with either a plain edge or partially serrated edge. I prefer plain edges, especially if the knife is coming in a high end steel like CTS-XHP. Plain edges are easier for me to maintain and a quality steel like CTS-XHP will hold a good edge for a long time. No need for serrations for what I need to do, but that comes down to personal preference.

My knife came with a high hollow grind and a swedge (top false edge). The blade has been given an attractive 2 tone satin finish. It has held up well under normal use.

The big draw to this new version of the Code-4 is that it comes with CTS-XHP blade steel. CTS-XHP is a high end steel from Carpenter. I have a good amount of experience with CTS-XHP at this point, and I think it’s a good steel. Offhand, I would compare it with something like CPM-154.

The CTS-XHP blade steel on my knife came with an aggressive edge. The knife attacked cardboard, rope, and wood. The blade is a little over 3mm thick, but has no problem cleanly slicing apples and paper. Edge retention has been excellent. CTS-XHP is a significant upgrade over the old AUS-8 blade, but also comes at a significant bump up in cost (it seems to be anywhere from 50%-75% over the old Aus 8 version, depending on where you shop). CTS-XHP is also easy to sharpen. I think that it is an all around smart choice for a working knife.

Handle, Ergonomics, and Pocket Clip

The Code 4’s handle is aluminum handle slabs with stainless steel hardware, a stainless steel lock bar, and an aluminum backspacer. While the handle slabs are a raw bead blasted gray, it is interesting to note that the backspacer is actually anodized golden brown. The end result is a handle that is simple, thin, and elegant.

The handle is also beautifully finished. The edges are all gently chamfered, the hardware is all perfectly inset. This is an immaculate knife. This is also a strong knife. With full metal construction I would wager that the Code 4 is one of Cold Steel’s stronger folding knives.

The ergonomics of the Code 4 is perhaps the knife’s biggest caveat. The design is fine, with a generous handle, 2 finger grooves and a slight thumb ramp, but because the knife is so thin I found the Code-4 uncomfortable to use for more than a minute or so without gloves. It is fine if you are going to open up a box or do some light foodprep, but if you plan on breaking down a bunch of cardboard or working on some serious carving you are going to want some gloves. The thin handle is great in the pocket, but bites into your hand.

Depending on how you intend to use the knife, this may or may not be a problem. For those that are wanting a self defense blade, this may not be an issue. But if you work at a warehouse and break down boxes for a living, I would go for a knife with a thicker handle, like a Large Voyager or Recon 1.

Although the Code 4 may not be the most comfortable knife in hand, it feels great in your pocket. It’s slim and discrete, and is likely ideal for someone like a police officer who carries a lot of gear and doesn’t have room for a massive pocket knife. At 4.3 ounces the knife is lightweight relative to its size and strength.

Cold Steel drilled and tapped the handle for tip up ambidextrous carry, and included 2 pocket clips for the knife. The pocket clips are simple steel clips, have good spring retention, and they work well. One nice thing about the lightly textured aluminum handle is that it does not tear up your pants like peel-ply G10.

Deployment and Lockup

The Code 4 comes with ambidextrous thumb studs. This is more like one and a half thumb studs, just like on the the American Lawman. The thumb stud is reversible with a flat head driver. There are phosphor bronze washers inside the handle, and the blade opens smoothly, and without too much effort. With that said, there is still a hefty backspring to overcome. This is not an easy knife to flick open. It can be done with practice, but won’t be a knife that you mindlessly flick open all day long.

The Code-4 comes equipped with Cold Steel’s infamous Tri-Ad lock. For the uninitiated, this is a lockback reinforced with a stop pin. Cold Steel has come under scrutiny lately over a gauche series of videos “comparing” the Tri-Ad lock to other locks on the market (where the Tri-Ad lock comes ahead by a wide margin). I am not sure what the value of these tests are when you consider the real world applications of a pocket knife, but it certainly has people talking.

Like all of the other Tri-Ad lock knives I have reviewed, this is a strong locking folder. There is not a suggestion of play in any direction on my knife. The lock is also reasonably to disengage, and doing so won’t kill your thumb. I am a fan of the Tri-Ad lock, and it is well executed here.

Blade centering is perfect on my example.

Cold Steel Code-4 – Final Thoughts

I am not sure why it took me so long to examine the Code-4, but I am glad I waited for the CTS-XHP version to come out. While the Code-4 is similar to knives like the Recon-1, the choice of aluminum for the handles over G-10 results in several important functional differences. The knife is super slim and easy to carry. I like that aspect of the Code-4 a lot.

What I am less enthused about is how the thin handle quickly becomes uncomfortable if you try to use the Code-4 for an extended cutting session. Gloves mitigate this somewhat, but this is an important point to mention. So often you hear reviewers (myself included) done on about how important it is for a pocket knife to be slim and light for easy carry. I still largely agree with that, but it’s important to understand that sometimes slimness has a price. In this case that price is comfort in hand. For that reason the American Lawman and Ultimate Hunter (both shown above) with their G10 handles won’t be leaving my collection any time soon.

I still think the Code-4 is an excellent tool and I intend to keep it in my collection. It’s like an upgraded Boker Titan Drop. If you primarily carry it for light utility and perhaps self defense (eg, as a police officer might carry it), then I think there is a lot going for the Code-4. It’s strong, intelligently designed, and nicely made. This is a no-nonsense tool, and I have no doubt that it will hold up for a long long time.

I recommend the Code 4 if you are seeking a long, slim, and strong daily carry folder, and don’t mind donning gloves for longer cutting chores.

Cold Steel Code 4 Spear Point Folding Knife

Made of highest quality material
Manufacturer: Cold Steel
Cold Steel Code 4 spear point plain edge 3.5in folding knife

I recommend purchasing the Cold Steel Code-4 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 300-1 Axis Flipper Review

by Dan Jackson 6 Comments

Last Updated: August 2, 2019
The Benchmade 300 is a knife that I originally passed on reviewing. This wasn’t an easy decision. As Benchmade’s first flipper, this is an important knife. But initial reports said that the flipping action was weak, and the knife seemed chunky. I was turned off for those reasons. Rather than going through the motions of reviewing a knife that I did not want to review, I decided to focus my efforts elsewhere.

Buy the Benchmade 300 at BladeHQ

Buy on Amazon

I think it was a mistake to ignore the 300. In a sea of somewhat boring and predictable Benchmade offerings, this knife offered a glimpse of something different for the company; even if it’s simply hitching on to the flipper wagon.

As I review some of Benchmade’s 2016 models, I see a few more flippers in the mix. I can’t help but wonder how the 300 has informed these new flippers, and future knives for Benchmade. That is what really drew me to examine the 300.

General Dimensions and Blade Details

The 300 has an overall length of 7.36″, a 3.18″ blade, weighs 4.85 ounces, and is made in the U.S.A. Technically, my knife with the black and blue G-10 handle scales is referred to as the 300-1. The original 300 comes with sand colored peel-ply G-10 handle scales and satin hardware. Beyond the scales and hardware you have the same knife. I am going to refer to my 300-1 as simply a “300” throughout this review.

The 300 knife is designed by Butch Ball, a nice man that I had the pleasure of meeting at the 2015 Blade Show. The 300 is aimed at the Every Day Carry (EDC) market. It is on the large side for my style of daily carry, although it makes for a nice “nights and weekends” knife when I can dress a little more casually. I have used it in an EDC capacity, and can see how others might do the same.

The 300 features a wide clip point blade. This is a dramatic blade that juts from the handle with a pronounced thumb ramp, deep belly, and large flipper. The high flat grind and bright satin finish contrast sharply with the dark handle and black hardware. There is a thin swedge that terminates with a fine tip.

In practice the 300 proved itself to be a capable slicer. Although the blade stock is relatively thick, this is a wide blade, and the high flat grind gets thin behind the edge. Standard fare like cardboard, rope, and apples are easily cleaved by the 300. A deep belly and strong tip are hallmarks of clip point blades, and these features aid the 300 in food prep and penetrating cuts. This versatile blade shape is well rounded and the 300 should handle most EDC chores without complaint.

Benchmade decided on 154CM for the blade steel. Knife fans will already know that this is a proven stainless steel, although it is now considered a mid range steel. Personally, I remain a big fan of 154CM. It takes a beautiful edge, holds it well, and is easy to sharpen. Like all steels (even stainless steels) you will need to keep the knife clean to avoid corrosion, but if adequately maintained this is an excellent working steel ideally suited for daily use.

Handle, Ergonomics, and Pocket Clip

My 300 came with 3-d machined layered blue and black G10 handle scales over blackened stainless steel liners (again, technically this is considered the 300-1 in Benchmade’s catalog). The knife is held together with torx-head fasteners and 2 blackened stand offs. The 300 originally is offered in sand colored peel ply G10 with odd grooves cut into it. It was different, and I appreciate that, but it did not appeal to me. The blue/black G10 is a little more toned down, but it still offers the end user something besides a plain black handle. The steel liners have been skeletonized extensively. The fit and finish is excellent on my knife.

The entire knife looks wide and unwieldy, but it all makes sense in hand. There are a series of finger grooves, that I typically am not a huge fan of, but I was pleasantly surprised with how natural the 300 fit my fingers (I take a “large” glove for reference). The thumb ramp features 3 shallow notches (jimping) that more index your thumb than hold it in place. This is a stark contrast from the toothy jimping on the Griptilian.

The machined G10 handle scales offer traction, but the texture is not aggressive like peel ply G-10. The texture is similar to the handles of the Volli or the Bedlam. If you prefer the traction and feel of a peel ply G-10 handle, then check out the tan colored version of this knife.

In practice this is a comfortable work knife. It stayed in my hand and did not irritate me in use. The finger grooves actually worked here for my hand.

Benchmade chose a black parkerized deep carry pocket clip, and situated the 300 for ambidextrous tip up carry. I like the deep carry clip and clip placement. The 300 buries deep into the pocket and carries well considering this is a larger knife. And I do consider the 300 to be a larger knife. Despite having a sub 3.5″ blade it is still a wide and thick knife. For what it is, I think the 300 carries pretty well.

Deployment and Lockup

The big draw to the 300 is that it is Benchmade’s first flipper, and that this is an axis lock flipper. In a perfect world we would get exceptional flipping action combined with the safety and convenience of the axis lock.

I am here to report that this knife does not flip like a traditional liner lock or frame lock flipper. The axis lock simply does not provide enough resistance (or “detent strength” if you were to compare it to a traditional detent driven flipper) to provide snappy flipping action. However, my knife was not a total flipper fail. If you use a strong lightswitch flick it is possible to flip the knife completely open without using your wrist. It takes some practice, and doesn’t compare to a ball detent driven flipper, but the knife does flip open this way. On a “1 to 10” scale, I’d say this is a 3. It still flips better than my 3” XM-18 did, but this isn’t a Shirogorov by any means.

Benchmade wisely chose to include ambidextrous thumb studs on the 300. This is a more reliable means of opening the blade, and provides the user some options in how they want to manipulate their 300. The thumb studs deploy the blade as easily as a Griptilian or any other axis lock knife with thumb studs. And of course you can use the axis lock to flick the knife open as well.

Speaking of axis locks, the axis lock on my 300 is excellent. My knife is rock solid and devoid of any horizontal or vertical blade play. I remain a big fan of the axis lock because it is strong, easy to use, is fully ambidextrous, and you do not need to put your fingers in the path of the blade to close the knife.

Blade centering is near perfect on my 300.

Benchmade 300 Review – Final Thoughts

I am glad I finally bought a 300. This is an interesting and important knife for Benchmade, and I was pleasantly surprised by it. The big question is “How well does it flip?” I am here to confirm that the flipping action is nothing to write home about. It works, but requires practice and a strong index finger.

If we examine the other aspects of the 300 it reveals a thoughtful and well made knife. The fit and finish is good, the knife cuts well, the steel is good, the handle is comfortable, and the 300 carries decently given its size.

It’s a thick and larger knife, so don’t expect this to carry like a Valet, but for a sturdy working knife this fits the bill. If you are a fan of knives like the Rift, then I think you would appreciate the 300.

This is an interesting first attempt at an axis lock flipper from BM. I wouldn’t call it a home run, but I am glad I picked one up. I am curious to see how Benchmade’s new 2016 flippers stack up against the 300, and plan to review at least one of them in the not so distant future.

In closing, don’t buy the 300 if you are expecting a Zero Tolerance grade flipper with an axis lock. The flipping action is simply not up to par with a ZT. Buy the 300 if you are a Benchmade fan that likes larger EDC knives, and wants to try something a little different.

Benchmade - AXIS Flipper 300 Knife, Plain Drop-Point, Satin Finish, Sand Handle

HIGH-QUALITY: The 154CM stainless steel blade is tough, rust resistant, and holds an edge well. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures, making it great for outdoor use.
WELL-DESIGNED: The AXIS Flipper 300 offers the speed and function of AXIS Assist, with the convenience of a flipper. The 300 can be opened and closed quickly and single-handedly.
COMFORTABLE: The 300's contoured handle is attractive and comfortable to use and hold. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The AXIS Flipper 300's drop-point, utility blade style and all-around functionality make it ideal for everyday carry.

I recommend purchasing the Benchmade 300 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Paramilitary 2 vs. Benchmade Griptilian – Knife Showdown

by Dan Jackson 30 Comments

2 Blades enter, 1 Blade leaves. That’s the premise behind a series of posts I’ve had sloshing around in my head for years now. A series of “vs” posts where I pit 2 knives against each other to see which blade comes out alive.

Buy the Griptilian or Para 2 at Amazon
Buy the Griptilian or Para 2 at BladeHQ

And when it comes to a knife showdown, I can think of no lower hanging fruit to start with than the Benchmade Griptilian and the Spyderco Paramilitary 2. Given that today is Superbowl Sunday, think of this as the “Knife Superbowl”.

These are 2 modern classics. 2 benchmark larger EDC blades with loyal followings from top shelf manufacturers. Both easily made their way to my best EDC knife page, and both are responsible for launching the knife addictions of thousands of people. So which knife wins in a head to head battle? There is only one way to find out.

General Dimensions

The specs of the Para 2 and Griptilian are as follows:

	Griptilian	Paramilitary 2
Overall Length:	8.07"	8.28"
Blade Length:	3.45"	3.44"
Weight:	3.82 oz	3.75 oz
Blade Thickness:	0.115"	0.14"
Handle Thickness:	.64"	.46"
Blade Material:	154CM	S30V
Handle Material:	Polymer/Steel	G10/Steel
Country of Origin:	USA	USA

Both are larger EDC knives. I suppose they could both be pressed into that nebulous “tactical” category as well.

In my mind, the biggest difference between the two is the thickness of the handle. The Griptilian’s handle is almost a quarter inch thicker.

Blade Geometry and Cutting Performance

The Para 2 comes with a fully flat ground leaf-shaped blade. No recurve, no serrations, no swedge. Just pure satin finished (or DLC coated) steel. The blade is ground reasonably thin, and offers a good balance of slicing performance and durability.

The Griptilian comes with a high flat ground drop point blade. There is a swedge that creates a fine tip, and the knife comes with or without serrations. Once again the blade is ground reasonably thin, and provides a balance of good slicing performance and durability. Benchmade also offers the Ritter Griptilian, which is a wider blade. It has more of a belly and is ground slightly thinner. I have one and think it’s a little better than the standard Griptilian blade.

Both the Paramilitary 2 and Griptilian have simple functional blades that cut well yet offer the end user decent toughness for harder use applications.

Personally I think it’s a toss up between the two, and it will boil down to your personal preference more than any competitive advantage.

Winner: Draw.

Blade Steel

The standard Para 2 comes with a S30V blade. The standard Griptilian comes with a 154CM blade. Both knives are offered in other steels. The Para 2 has been released in a myriad of sprint runs, with every type of exotic steel imaginable. The Griptilian has had some limited releases over the years, but is commonly offered in S30V.

S30V holds an edge slightly better than 154CM, while 154CM is slightly easier to sharpen than S30V. Both 154CM and S30V are fine working steels in my book, so I would not favor either knife simply for the blade steel chosen, although it would be fair to argue S30V is the superior steel.

Winner: Paramilitary 2, although it’s damn close in my book.

Handle Construction

The Paramilitary 2 features a G10 handle with nested steel liners. The Griptilian features a FRN (plastic) handle with nested steel liners. In late 2015 Benchmade finally announced that they are issuing the Griptilian in G10. These G10 handled Griptilians are apparently going to retail for a little under $200, which is quite steep. I haven’t acquired a G10 Griptilian yet, so for now I am going to limit my discussion to the FRN version.

If you read or watch nearly any Griptilian review, at some point the reviewer will gripe about the FRN handles. They are lightweight, and “plastic-y” feeling. It has never really bothered me, but I realize that people prefer G10 over standard plastic and it’s considered a more premium material. The Griptilian handles are also somewhat bulky, and it creates for a thicker knife. This feels better in hand, but it takes up more space in the pocket.

Fit and finish of the handles are basically on par. Both knives are made in the USA. I think the finish work is slightly better on the Griptilian, but both are screw together designs with partial stainless steel liners. The Para 2 has an open back / pillar construction design, while the Griptilian has a closed back design. Most people find open back designs to be preferable, as they are easier to clean.

Personally, I prefer a thinner handle, I prefer G10, and I prefer an open back design, so I will give the handle construction to the Paramilitary 2 over the standard FRN Griptilian.

Winner: Para 2.

Ergonomics

Both the Griptilian and Paramilitary 2 have reputations for being comfortable working knives. Both feature spacious handles that allow for a full grip for normal people. Both knives feature textured handles with thumb ramps and jimping on the spine, providing plenty of traction to the end user.

There are some differences between the two knives in hand. The Griptilian features a fat handle and is supremely comfortable. The Para 2’s handle is thinner and boxier. It’s still comfortable but I think it is less comfortable than the Griptilian.

However, the Paramilitary 2 features a forward finger choil (or “50/50” choil). I really like forward finger choils as it gives the end user more options in using the knife. You can choke up for detail oriented tasks, and choke back for cuts that need more leverage. The Griptilian does not have a 50/50 choil and can basically only be used one way.

For extended cutting tasks I would pick the Griptilian, however, the Paramilitary 2 is more versatile. That said, I have carried and used both knives for years and think this is largely a toss up that will come down to personal preference. Both are capable of getting work done.

Winner: Para 2, but again, damn close.

Pocket Clips and Carry

Both the Paramilitary 2 and Griptilian feature large “spoon style” pocket clips. Neither have ultra deep carry clips. Both clips are stainless steel. The standard Para 2 comes with a satin finished clip and the standard Griptilian comes with a black coated clip. Both clips are strong. Both knives bury decently low in the pocket. The Para 2’s handle is drilled and tapped for 4 way ambidextrous carry. The Griptilian’s handle is designed for ambidextrous tip up carry (2 way carry).

Both knives are lightweight for their size and are easy to EDC for their size. There are certainly smaller more EDC friendly options out there, but if you are looking for a knife with a ~3.5″ blade, there are few options I can think of that carry better than a Para 2 or Griptilian.

However, I think the Para 2 carries slightly better thanks to its flatter handle. The Griptilian is a lightweight knife, but it’s thick and you will notice it more in the pocket. Because the Para 2 is materially thicker and offers 4 way carry, I am giving this round to the Para 2.

Winner: Para 2.

Deployment

Both knives are manual action (non spring assisted) folders. The Griptilian comes with thumb studs (shown) or a thumb hole. The Para 2 of course comes with a thumb hole. Both knives are easy to open and are equipped with phosphor bronze washers. Both knives can also be opened with gravity by manipulating their locks.

You can argue that a thumb hole is superior to thumb studs (and from a purely practical point of view, I would agree with that), but since Benchmade offers the Griptilian in both configurations I don’t see either knife being a clear winner.

Winner: Draw.

Lockup

The Paramilitary 2 features a compression lock, and the Griptilian features the axis lock. Both locks are similar in that they are located near the back of the handle, can be manipulated with one hand, and it’s possible to close the blade without getting your fingers in the way.

I think both locks are equally strong, although my guess is based upon their respective builds the Para 2 is a little stronger with its near full stainless steel liners and G10 handle scales. Personally, I prefer the axis lock as I think it is slightly less fiddly to use than the compression lock (especially as a lefty), but that is my personal bias creeping in. For all intents and purposes I’d say this category is basically a draw.

Winner: Draw – although I prefer the axis lock personally.

Price

Money is the great equalizer – or so they say. I know that Tony has equalized for price on his knife shootouts, and I think it’s important to do.

The Para 2 is considerably more expensive than the Griptilian. At the time of writing this article the Griptilian retails for around $90, while the Para 2 comes in around $125. So the Para 2 is about 35% more expensive than the Griptilian. Is the Para 2 35% better than the Griptilian? That’s a tough question to answer and I’ll try to consider it in my final thoughts.

Paramilitary 2 vs. Benchmade Griptilian – Final Thoughts

I would say that the race between the Griptilian and Paramilitary 2 is a close one. Where the Para 2 distances itself from the Griptilian is in the handle. It’s thinner, and is made of G10 vs. plastic. This results in a knife that is easier to carry, and is generally considered to be of higher quality. Other factors in favor of the Para 2’s is the use of S30V steel (widely regarded as superior to 154CM, although practically speaking I don’t think you will notice a huge difference) and the fact that the clip is a “4 corners” clip (vs. Benchmade’s clip only having 2 positions).

So I think you can objectively argue that the Paramilitary 2 is the better knife here. That said, the Para 2 is also 35% more expensive, so you have to determine whether the thinner handle, better materials, and 4 way clip are worth the price premium for you.

Personally, I think the Para 2 is worth the extra money, but when you factor in the added price the fight between the Para 2 and Griptilian gets very close. When you consider the premium in price, the real winner here isn’t so clear.

But no one came here to see a draw, so I’ll declare the Para 2 the champion. I think that the upgrades are worth the increase in price, and ultimately that leaves you with a better knife.

Still, the Griptilian is no slouch and remains one of my favorite EDCs of all time. I have carried and used both of these knives for years, and neither will be leaving my collection.

The G-10 Griptilian

I am guessing that a number of people reading this article will say “What about the new G-10 551 Griptilian?” That is a valid question. The G-10 Griptilian addresses many of the quibbles that I have pointed out about the original Griptilian (the plastic handles, closed back design, lack of a deep carry pocket clip, etc).

At the time of originally publishing this article, the G-10 Griptilian just hit the market. I picked one up and wrote a review on it in May of 2016. It is an awesome knife, and Benchmade did a great job with it. All things equal, I like it more than the Para 2. However, at close to $200 the G10 Grip is almost $100 more than the Para 2. At that great of a price delta I would hope that it beats out the Para 2, and it meets those expectations.

I think a more interesting comparison is the G-10 Grip vs. a Sprint Run Paramilitary 2. If you compare the G-10 Griptilian over a Sprint Run Para 2 with super steel, I’d go with the G-10 Griptilian. The machined handles of the G-10 Griptilian are amazing, and all of the other subtle refinements with the new Griptilian make it a much nicer knife than the Para 2 – even a Para 2 with upgraded blade steel.

I’d rather have a blinged out G-10 Griptilian than a Para 2 with super steel and no other upgrades.

My Final, Final Thoughts

So there you have it, the Paramilitary 2 vs. the Griptilian. This was actually pretty tough. The Para 2 wins here, but when you adjust for price it could slide either way.

Let me know what you thought of this “vs.” article and whether you want to see more of this. If so, what knives should I pit against each other next?

Benchmade - Griptilian 551 Folding Knife, Plain Drop-Point, Coated Finish, Black Handle

Folding Knives

Sale

Spyderco Para Military 2 Signature Camo Knife with 3.42" CPM S45VN Steel Blade and Durable G-10 Handle - PlainEdge - C81GPCMO2

An Improved Classic: Undeniably one of Spyderco's most popular and in-demand designs, the Para Military 2 distills the world-class performance of our legendary Military Model into a more compact, Pocket-Friendly package.
Superior Quality: We kept the same high-performance full flat-ground blade but we've also lengthened the blade's tip and added additional surface jimping to both the spine and finger coil.
A Secure Grip: The G-10 handle is narrowed at the end improving the Ergonomics. The handle and blade have been profile thinner; removing uncomfortable angles when in the closed position.
Easy-to-Use: The Para Military 2 features extreme strength, reliability, and ease of use of our patented Compression Lock mechanism and versatility of a 4-position pocket clip.
Dependable: Refinements to overall construction may not be drastic but from the G-10 textured handle to the steel full flat blade, everything is sharper, smoother and guaranteed to provide performance and user comfort.

And as always, if you are considering buying a Paramilitary 2 or a Benchmade Griptilian, I recommend purchasing them at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

CRKT Hootenany Review

by Dan Jackson Leave a Comment

Last Update: March 4, 2018
Hootenany, noun, a social gathering or informal concert featuring folk singing, and sometimes, dancing.

I don’t read too far into names, but I had to look Hootenanny up in an attempt to gain a little context. If you ever meet Ken Onion, the designer of the Hootenanny, you will quickly learn he is a fun and lighthearted guy. Perhaps the name offers more of a view into the designer himself, than the product at hand.

Buy the CRKT Hootenanny at BladeHQ

Buy on Amazon

The Hootenanny is Ken’s take on a folding hunting knife crossed with a modern Every Day Carry (EDC) piece. So perhaps the name harks back to old timey days, when people might regularly use their folding knives to prepare meals and whittle sticks around the cracker barrel prior to a good ole fashioned hoe down.

Either way, this struck me as one of CRKT’s best offerings of 2015, and I wanted to give it a shot.

General Dimensions and Blade Steel

The Hootenanny has an overall length of 7.84″, a 3.34″ blade, weighs 4.8 ounces, and is made in China. Since partnering up with CRKT, Ken Onion has seemed to favor thinner, lighter knives. I think that is a good thing. The Hootenanny is still a big knife, so any attempts to pare it down to something manageable are welcome in my book.

This is a “fish and fowl” knife, so it’s primary application is for hunting and processing small game. Extra length to the blade and handle are important for being effective in that role.

With that said, most people who buy this will likely use it as a EDC piece, and that is the main perspective that I evaluated Hootenanny from.

The Hootenanny has a slender upswept blade with a long curving belly and high hollow grind. Perhaps the most distinctive feature of the blade is the run of jimping midway along the spine. All of these features were built into the knife with processing meat in mind. I’m not a hunter, and didn’t get a chance to take this one fishing, but I have used it in the kitchen. The knife slices well, and the upswept tip stayed out of the way when I broke down a chicken for dinner. I could see this having a place at a camp site, but did not test the knife in that capacity.

CRKT went with 8Cr13MoV steel. I’ve discussed this steel quite a bit (and you can always read further about knife steel on the knife steel page), but for the uninitiated 8Cr13MoV is a lower end Chinese stainless steel. It is easy to sharpen, but not particularly great in the edge retention department.

Given the ~$40.00 price point I think the choice of steel is appropriate here. You won’t find much else from a Chinese knife in this price range. I personally do not mind 8Cr13MoV at the right price. I was careless and my blade did develop a little corrosion during testing, so be sure to keep it cleaned and oiled like any other pocket knife.

Handle, Ergonomics, and Pocket Clip

The Hootenanny is a bolstered knife, with a stainless steel frame, FRN (reinforced plastic) handle scales, and a FRN backspacer. The handle has some nice details, with flush mount bolts holding the scales in place, curving lines cut into the gunmental gray bolsters, bolsters that are integrated into the liners, and an oversize decorative pivot. The construction is solid and the finish work is good. The pieces line up, the tolerances are tight, and the end result is a thoughtfully executed handle that makes the most of its humble materials.

The Hootenanny is a large folder and provides plenty of room for a variety of grips and hand sizes. The blade has a large foward finger choil, allowing you to move in close on the blade. The handle scales are lightly textured. The scales offer some traction, but aren’t as grippy as peel ply G10. There is jimping on the back of the handle, and also on the spine. All of these features are designed to hold your hand in place; presumably while gutting a trout or plucking bird shot from a dove. I used the knife in more pedestrian applications, and found the Hootenanny to be be comfortable and grippy. Ken knows ergonomics and that shows in the design and execution of the Hootenanny.

In the past, Ken Onion’s pocket clip designs have been criticized for being goofy. The clip on the Hootenanny is relatively subdued and discrete. It curves along the back side of the handle, and is really set for right side tip up carry only. Being a lefty, I prefer an ambidextrous option, but if you are only going to put the clip in one spot, this is the place to do it. The clip has good spring retention, and it buries the knife deeply in the pocket.

In practice the Hootenanny caries well for a larger knife. At nearly 5 ounces, you feel this knife in the pocket – especially with most of the mass being around the pivot. Still, the Hootenanny is a comfortable carry. The knife is thin and the pocket clip is strong, so you can clip the knife in place and then forget about it.

Deployment and Lockup

Like many of Ken’s designs, the Hootenanny is a flipper. The flipper is prominent, heavily textured, and easy to locate and flip. The detent is strong and the blade fires out with a loud metallic “thwack”. CRKT has done a good job with flippers in the past, and this Hootenanny is no exception. Inside there are what appears to be caged bearings, although CRKT has marketed this as an IKBS (Ikoma Korth Bearing System) knife. The action is smooth and the blade glides into the open or closed position.

CRKT and Ken decided to make the Hootenanny a bolster lock knife, which is basically a frame lock where scales run 3/4 the length of the handle. The bolsters are 2CR13 steel, and hold the blade securely in place. There is no lock rock or side to side blade play in my knife, which is what I would expect from a steel frame lock. My knife locks up around 70% – so it’s a later lockup, but it has stayed there since day one and there is no stickiness to the lock at all.

Here is a shot of the Hootenanny next to the Kershaw Blur:

My blade favors the lock side by a millimeter, but does not rub.

CRKT Hootenanny Review – Final Thoughts

The Hootenanny is a successful knife, and is probably my favorite CRKT design for 2015. This is a more subdued design for Ken. There is no recurve in the blade, the pocket clip is normal looking, the overall look is handsome with the dark scales and gunmetal gray bolsters.

The fit and finish of CRKT’s stuff has always been nice, and the Hootenanny is no exception. And I think given the budget CRKT made some nice choices here with the satin finished blade, IKBS, strong flipper and oversize pivot. The use of FRN keeps the knife reasonably light (that is a big reason why I decided to not review the CRKT G.S.D. – a handsome knife by a popular designer, but just too heavy for my taste).

If I had to complain, I would complain about the knife begging for higher end materials. Better blade steel would be at the top of my list. People harped on Cold Steel for years about their use of AUS-8, and now that everything is being rolled out in CTS-XHP, I think we need a new company to “encourage”. And CRKT is actually heading in that direction. They have collaborated with LionSteel, TOPS, and Condor to venture in to higher end products like the Hi Jinx, Hoodwork, and Mah-Chete. While CRKT is a company whose bread and butter is value and volume, the enthusiast in me can’t help but ask for a higher end version of the Hootenanny.

For around $40, the Hootenanny delivers a lot of bang for your buck. If you are in the market for a sturdy 3.5″ folder, you will be hard pressed to find much better at this price point. Perhaps the Kershaw Blur is the closest competitor, but these days they retail for well over $50.

The Hootenanny is a thoughtfully designed and well made tool, that works as either a folding field knife or large EDC.

Columbia River Knife & Tool 4008067-SSI Hootenanny Folding Knife, Multi-Coloured, 7.94-Inch

Fast Opening: IKBS ball bearing pivot deploys the blade fast
Visual Appeal: Modern, oversized pivot, adds style accent
Low Profile: Pocket clip provides secure carry
Designed by Ken Onion in Kaneohe, Hawaii
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend purchasing the CRKT Hootenanny at Amazon or BladeHQ. Thanks for reading.